+++ /dev/null
-* Analog Devices ADV748X video decoder with HDMI receiver
-
-The ADV7481 and ADV7482 are multi format video decoders with an integrated
-HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB
-from three input sources HDMI, analog and TTL.
-
-Required Properties:
-
- - compatible: Must contain one of the following
- - "adi,adv7481" for the ADV7481
- - "adi,adv7482" for the ADV7482
-
- - reg: I2C slave addresses
- The ADV748x has up to twelve 256-byte maps that can be accessed via the
- main I2C ports. Each map has it own I2C address and acts as a standard
- slave device on the I2C bus. The main address is mandatory, others are
- optional and remain at default values if not specified.
-
-Optional Properties:
-
- - interrupt-names: Should specify the interrupts as "intrq1", "intrq2" and/or
- "intrq3". All interrupts are optional. The "intrq3" interrupt
- is only available on the adv7481
- - interrupts: Specify the interrupt lines for the ADV748x
- - reg-names : Names of maps with programmable addresses.
- It shall contain all maps needing a non-default address.
- Possible map names are:
- "main", "dpll", "cp", "hdmi", "edid", "repeater",
- "infoframe", "cbus", "cec", "sdp", "txa", "txb"
-
-The device node must contain one 'port' child node per device input and output
-port, in accordance with the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes
-are numbered as follows.
-
- Name Type Port
- ---------------------------------------
- AIN0 sink 0
- AIN1 sink 1
- AIN2 sink 2
- AIN3 sink 3
- AIN4 sink 4
- AIN5 sink 5
- AIN6 sink 6
- AIN7 sink 7
- HDMI sink 8
- TTL sink 9
- TXA source 10
- TXB source 11
-
-The digital output port nodes, when present, shall contain at least one
-endpoint. Each of those endpoints shall contain the data-lanes property as
-described in video-interfaces.txt.
-
-Required source endpoint properties:
- - data-lanes: an array of physical data lane indexes
- The accepted value(s) for this property depends on which of the two
- sources are described. For TXA 1, 2 or 4 data lanes can be described
- while for TXB only 1 data lane is valid. See video-interfaces.txt
- for detailed description.
-
-Ports are optional if they are not connected to anything at the hardware level.
-
-Example:
-
- video-receiver@70 {
- compatible = "adi,adv7482";
- reg = <0x70 0x71 0x72 0x73 0x74 0x75
- 0x60 0x61 0x62 0x63 0x64 0x65>;
- reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
- "infoframe", "cbus", "cec", "sdp", "txa", "txb";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- interrupt-parent = <&gpio6>;
- interrupt-names = "intrq1", "intrq2";
- interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
- <31 IRQ_TYPE_LEVEL_LOW>;
-
- port@7 {
- reg = <7>;
-
- adv7482_ain7: endpoint {
- remote-endpoint = <&cvbs_in>;
- };
- };
-
- port@8 {
- reg = <8>;
-
- adv7482_hdmi: endpoint {
- remote-endpoint = <&hdmi_in>;
- };
- };
-
- port@a {
- reg = <10>;
-
- adv7482_txa: endpoint {
- clock-lanes = <0>;
- data-lanes = <1 2 3 4>;
- remote-endpoint = <&csi40_in>;
- };
- };
-
- port@b {
- reg = <11>;
-
- adv7482_txb: endpoint {
- clock-lanes = <0>;
- data-lanes = <1>;
- remote-endpoint = <&csi20_in>;
- };
- };
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/adv748x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADV748X video decoder with HDMI receiver
+
+maintainers:
+ - Kieran Bingham <kieran.bingham@ideasonboard.com>
+ - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+description:
+ The ADV7481 and ADV7482 are multi format video decoders with an integrated
+ HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB
+ from three input sources HDMI, analog and TTL.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - adi,adv7481
+ - adi,adv7482
+
+ reg:
+ minItems: 1
+ maxItems: 12
+ description:
+ The ADV748x has up to twelve 256-byte maps that can be accessed via the
+ main I2C ports. Each map has it own I2C address and acts as a standard
+ slave device on the I2C bus. The main address is mandatory, others are
+ optional and remain at default values if not specified.
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: main
+ - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+ - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+ - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+ - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+ - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+ - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+ - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+ - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+ - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+ - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+ - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+
+ interrupts: true
+
+ interrupt-names: true
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ patternProperties:
+ "^port@[0-7]$":
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input port nodes for analog inputs AIN[0-7].
+
+ properties:
+ port@8:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input port node for HDMI.
+
+ port@9:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input port node for TTL.
+
+ port@a:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Output port node, single endpoint describing the CSI-2 transmitter TXA.
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@b:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Output port node, single endpoint describing the CSI-2 transmitter TXB.
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ maxItems: 1
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: adi,adv7481
+ then:
+ properties:
+ interrupts:
+ minItems: 1
+ maxItems: 3
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 3
+ items:
+ enum: [ intrq1, intrq2, intrq3 ]
+ else:
+ properties:
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ enum: [ intrq1, intrq2 ]
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - ports
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ video-receiver@70 {
+ compatible = "adi,adv7482";
+ reg = <0x70 0x71 0x72 0x73 0x74 0x75
+ 0x60 0x61 0x62 0x63 0x64 0x65>;
+ reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
+ "infoframe", "cbus", "cec", "sdp", "txa", "txb";
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>, <31 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "intrq1", "intrq2";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@7 {
+ reg = <7>;
+
+ adv7482_ain7: endpoint {
+ remote-endpoint = <&cvbs_in>;
+ };
+ };
+
+ port@8 {
+ reg = <8>;
+
+ adv7482_hdmi: endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+
+ port@a {
+ reg = <10>;
+
+ adv7482_txa: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+
+ port@b {
+ reg = <11>;
+
+ adv7482_txb: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1>;
+ remote-endpoint = <&csi20_in>;
+ };
+ };
+ };
+ };
+ };
projects / users / hch / dma-mapping.git / commitdiff