arm64: dts: meson: a1: reorder gpio_intc node definition

It is recommended to maintain a sorted order of device tree entries, so
move the gpio_intc node ahead of the uart_AO node.

Fixes: ea254644a228 ("arm64: dts: meson-a1: add gpio_intc node")
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-5-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index d29569da88dd0166790e51dfb7fdc812d8fc948d..13c7e14f3b22669d46e07b36d5aade4415eb1410 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -105,6 +105,16 @@
 
                        };
 
+                       gpio_intc: interrupt-controller@440 {
+                               compatible = "amlogic,meson-a1-gpio-intc",
+                                            "amlogic,meson-gpio-intc";
+                               reg = <0x0 0x0440 0x0 0x14>;
+                               interrupt-controller;
+                               #interrupt-cells = <2>;
+                               amlogic,channel-interrupts =
+                                       <49 50 51 52 53 54 55 56>;
+                       };
+
                        uart_AO: serial@1c00 {
                                compatible = "amlogic,meson-a1-uart",
                                             "amlogic,meson-ao-uart";
@@ -124,16 +134,6 @@
                                clock-names = "xtal", "pclk", "baud";
                                status = "disabled";
                        };
-
-                       gpio_intc: interrupt-controller@0440 {
-                               compatible = "amlogic,meson-a1-gpio-intc",
-                                            "amlogic,meson-gpio-intc";
-                               reg = <0x0 0x0440 0x0 0x14>;
-                               interrupt-controller;
-                               #interrupt-cells = <2>;
-                               amlogic,channel-interrupts =
-                                       <49 50 51 52 53 54 55 56>;
-                       };
                };
 
                gic: interrupt-controller@ff901000 {