arm64: dts: qcom: qdu1000: Add SDHCI node

Add sdhc node for eMMC on QDU1000 and QRU1000 SoCs. Also add
required pins for SDHCI, so that the interface can work reliably.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230601111128.19562-3-quic_kbajaj@quicinc.com

diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 2914bbc25e41ca9013151adba35ad23b568b8545..7153461d62d76ac6d412b8e3199b5a4293e9b555 100644 (file)
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -842,6 +842,53 @@
                        #hwlock-cells = <1>;
                };
 
+               sdhc: mmc@8804000 {
+                       compatible = "qcom,qdu1000-sdhci", "qcom,sdhci-msm-v5";
+                       reg = <0x0 0x08804000 0x0 0x1000>,
+                             <0x0 0x08805000 0x0 0x1000>;
+                       reg-names = "hc", "cqhci";
+
+                       interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "hc_irq", "pwr_irq";
+
+                       clocks = <&gcc GCC_SDCC5_AHB_CLK>,
+                                <&gcc GCC_SDCC5_APPS_CLK>,
+                                <&rpmhcc RPMH_CXO_CLK>;
+                       clock-names = "iface",
+                                     "core",
+                                     "xo";
+
+                       resets = <&gcc GCC_SDCC5_BCR>;
+
+                       interconnects = <&system_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>,
+                                       <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_SDCC_2 0>;
+                       interconnect-names = "sdhc-ddr", "cpu-sdhc";
+                       power-domains = <&rpmhpd QDU1000_CX>;
+                       operating-points-v2 = <&sdhc1_opp_table>;
+
+                       iommus = <&apps_smmu 0x80 0x0>;
+                       dma-coherent;
+
+                       bus-width = <8>;
+
+                       qcom,dll-config = <0x0007642c>;
+                       qcom,ddr-config = <0x80040868>;
+
+                       status = "disabled";
+
+                       sdhc1_opp_table: opp-table {
+                               compatible = "operating-points-v2";
+
+                               opp-384000000 {
+                                       opp-hz = /bits/ 64 <384000000>;
+                                       required-opps = <&rpmhpd_opp_nom>;
+                                       opp-peak-kBps = <6528000 1652800>;
+                                       opp-avg-kBps = <400000 0>;
+                               };
+                       };
+               };
+
                pdc: interrupt-controller@b220000 {
                        compatible = "qcom,qdu1000-pdc", "qcom,pdc";
                        reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
@@ -1100,6 +1147,56 @@
                                pins = "gpio31";
                                function = "gpio";
                        };
+
+                       sdc_on_state: sdc-on-state {
+                               clk-pins {
+                                       pins = "sdc1_clk";
+                                       drive-strength = <16>;
+                                       bias-disable;
+                               };
+
+                               cmd-pins {
+                                       pins = "sdc1_cmd";
+                                       drive-strength = <10>;
+                                       bias-pull-up;
+                               };
+
+                               data-pins {
+                                       pins = "sdc1_data";
+                                       drive-strength = <10>;
+                                       bias-pull-up;
+                               };
+
+                               rclk-pins {
+                                       pins = "sdc1_rclk";
+                                       bias-pull-down;
+                               };
+                       };
+
+                       sdc_off_state: sdc-off-state {
+                               clk-pins {
+                                       pins = "sdc1_clk";
+                                       drive-strength = <2>;
+                                       bias-disable;
+                               };
+
+                               cmd-pins {
+                                       pins = "sdc1_cmd";
+                                       drive-strength = <2>;
+                                       bias-pull-up;
+                               };
+
+                               data-pins {
+                                       pins = "sdc1_data";
+                                       drive-strength = <2>;
+                                       bias-pull-up;
+                               };
+
+                               rclk-pins {
+                                       pins = "sdc1_rclk";
+                                       bias-pull-down;
+                               };
+                       };
                };
 
                sram@14680000 {