phy: qcom-qusb2: Add generic QUSB2 V2 PHY support

Add generic QUSB2 V2 PHY table so the respective phys
can use the same table.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index bf94a52d308715955f5703365b5a776d51658081..70c9da693eecb927394713aa9b4bb35718d887cf 100644 (file)
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2017, 2019, The Linux Foundation. All rights reserved.
  */
 
 #include <linux/clk.h>
@@ -177,7 +177,7 @@ static const struct qusb2_phy_init_tbl msm8998_init_tbl[] = {
        QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19),
 };
 
-static const unsigned int sdm845_regs_layout[] = {
+static const unsigned int qusb2_v2_regs_layout[] = {
        [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
        [QUSB2PHY_PLL_STATUS]           = 0x1a0,
        [QUSB2PHY_PORT_TUNE1]           = 0x240,
@@ -191,7 +191,7 @@ static const unsigned int sdm845_regs_layout[] = {
        [QUSB2PHY_INTR_CTRL]            = 0x230,
 };
 
-static const struct qusb2_phy_init_tbl sdm845_init_tbl[] = {
+static const struct qusb2_phy_init_tbl qusb2_v2_init_tbl[] = {
        QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x03),
        QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c),
        QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80),
@@ -258,10 +258,10 @@ static const struct qusb2_phy_cfg msm8998_phy_cfg = {
        .update_tune1_with_efuse = true,
 };
 
-static const struct qusb2_phy_cfg sdm845_phy_cfg = {
-       .tbl            = sdm845_init_tbl,
-       .tbl_num        = ARRAY_SIZE(sdm845_init_tbl),
-       .regs           = sdm845_regs_layout,
+static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
+       .tbl            = qusb2_v2_init_tbl,
+       .tbl_num        = ARRAY_SIZE(qusb2_v2_init_tbl),
+       .regs           = qusb2_v2_regs_layout,
 
        .disable_ctrl   = (PWR_CTRL1_VREF_SUPPLY_TRIM | PWR_CTRL1_CLAMP_N_EN |
                           POWER_DOWN),
@@ -774,8 +774,8 @@ static const struct of_device_id qusb2_phy_of_match_table[] = {
                .compatible     = "qcom,msm8998-qusb2-phy",
                .data           = &msm8998_phy_cfg,
        }, {
-               .compatible     = "qcom,sdm845-qusb2-phy",
-               .data           = &sdm845_phy_cfg,
+               .compatible     = "qcom,qusb2-v2-phy",
+               .data           = &qusb2_v2_phy_cfg,
        },
        { },
 };