dt-bindings: net: snps,dwmac: Document queue config subnodes

The queue configuration is referenced by snps,mtl-rx-config and
snps,mtl-tx-config. Some in-tree DTs and the example put the
referenced config nodes directly beneath the root node, but
most in-tree DTs put it as child node of the dwmac node.

This adds proper description for this setup, which has the
advantage of validating the queue configuration node content.

The example is also updated to use the sub-node style, incl.
the axi bus configuration node, which got the same treatment
as the queues config in 5361660af6d3 ("dt-bindings: net: snps,dwmac:
Document stmmac-axi-config subnode").

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 13b984076af5381e25d39a2ff4585316d3442bc3..e88a86623fcec11432456051b269feb87f5788c9 100644 (file)
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -167,56 +167,238 @@ properties:
   snps,mtl-rx-config:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      Multiple RX Queues parameters. Phandle to a node that can
-      contain the following properties
-        * snps,rx-queues-to-use, number of RX queues to be used in the
-          driver
-        * Choose one of these RX scheduling algorithms
-          * snps,rx-sched-sp, Strict priority
-          * snps,rx-sched-wsp, Weighted Strict priority
-        * For each RX queue
-          * Choose one of these modes
-            * snps,dcb-algorithm, Queue to be enabled as DCB
-            * snps,avb-algorithm, Queue to be enabled as AVB
-          * snps,map-to-dma-channel, Channel to map
-          * Specifiy specific packet routing
-            * snps,route-avcp, AV Untagged Control packets
-            * snps,route-ptp, PTP Packets
-            * snps,route-dcbcp, DCB Control Packets
-            * snps,route-up, Untagged Packets
-            * snps,route-multi-broad, Multicast & Broadcast Packets
-          * snps,priority, bitmask of the tagged frames priorities assigned to
-            the queue
+      Multiple RX Queues parameters. Phandle to a node that
+      implements the 'rx-queues-config' object described in
+      this binding.
+
+  rx-queues-config:
+    type: object
+    properties:
+      snps,rx-queues-to-use:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: number of RX queues to be used in the driver
+      snps,rx-sched-sp:
+        type: boolean
+        description: Strict priority
+      snps,rx-sched-wsp:
+        type: boolean
+        description: Weighted Strict priority
+    allOf:
+      - if:
+          required:
+            - snps,rx-sched-sp
+        then:
+          properties:
+            snps,rx-sched-wsp: false
+      - if:
+          required:
+            - snps,rx-sched-wsp
+        then:
+          properties:
+            snps,rx-sched-sp: false
+    patternProperties:
+      "^queue[0-9]$":
+        description: Each subnode represents a queue.
+        type: object
+        properties:
+          snps,dcb-algorithm:
+            type: boolean
+            description: Queue to be enabled as DCB
+          snps,avb-algorithm:
+            type: boolean
+            description: Queue to be enabled as AVB
+          snps,map-to-dma-channel:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: DMA channel id to map
+          snps,route-avcp:
+            type: boolean
+            description: AV Untagged Control packets
+          snps,route-ptp:
+            type: boolean
+            description: PTP Packets
+          snps,route-dcbcp:
+            type: boolean
+            description: DCB Control Packets
+          snps,route-up:
+            type: boolean
+            description: Untagged Packets
+          snps,route-multi-broad:
+            type: boolean
+            description: Multicast & Broadcast Packets
+          snps,priority:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: Bitmask of the tagged frames priorities assigned to the queue
+        allOf:
+          - if:
+              required:
+                - snps,dcb-algorithm
+            then:
+              properties:
+                snps,avb-algorithm: false
+          - if:
+              required:
+                - snps,avb-algorithm
+            then:
+              properties:
+                snps,dcb-algorithm: false
+          - if:
+              required:
+                - snps,route-avcp
+            then:
+              properties:
+                snps,route-ptp: false
+                snps,route-dcbcp: false
+                snps,route-up: false
+                snps,route-multi-broad: false
+          - if:
+              required:
+                - snps,route-ptp
+            then:
+              properties:
+                snps,route-avcp: false
+                snps,route-dcbcp: false
+                snps,route-up: false
+                snps,route-multi-broad: false
+          - if:
+              required:
+                - snps,route-dcbcp
+            then:
+              properties:
+                snps,route-avcp: false
+                snps,route-ptp: false
+                snps,route-up: false
+                snps,route-multi-broad: false
+          - if:
+              required:
+                - snps,route-up
+            then:
+              properties:
+                snps,route-avcp: false
+                snps,route-ptp: false
+                snps,route-dcbcp: false
+                snps,route-multi-broad: false
+          - if:
+              required:
+                - snps,route-multi-broad
+            then:
+              properties:
+                snps,route-avcp: false
+                snps,route-ptp: false
+                snps,route-dcbcp: false
+                snps,route-up: false
+        additionalProperties: false
+    additionalProperties: false
 
   snps,mtl-tx-config:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      Multiple TX Queues parameters. Phandle to a node that can
-      contain the following properties
-        * snps,tx-queues-to-use, number of TX queues to be used in the
-          driver
-        * Choose one of these TX scheduling algorithms
-          * snps,tx-sched-wrr, Weighted Round Robin
-          * snps,tx-sched-wfq, Weighted Fair Queuing
-          * snps,tx-sched-dwrr, Deficit Weighted Round Robin
-          * snps,tx-sched-sp, Strict priority
-        * For each TX queue
-          * snps,weight, TX queue weight (if using a DCB weight
-            algorithm)
-          * Choose one of these modes
-            * snps,dcb-algorithm, TX queue will be working in DCB
-            * snps,avb-algorithm, TX queue will be working in AVB
-              [Attention] Queue 0 is reserved for legacy traffic
-                          and so no AVB is available in this queue.
-          * Configure Credit Base Shaper (if AVB Mode selected)
-            * snps,send_slope, enable Low Power Interface
-            * snps,idle_slope, unlock on WoL
-            * snps,high_credit, max write outstanding req. limit
-            * snps,low_credit, max read outstanding req. limit
-          * snps,priority, bitmask of the priorities assigned to the queue.
-            When a PFC frame is received with priorities matching the bitmask,
-            the queue is blocked from transmitting for the pause time specified
-            in the PFC frame.
+      Multiple TX Queues parameters. Phandle to a node that
+      implements the 'tx-queues-config' object described in
+      this binding.
+
+  tx-queues-config:
+    type: object
+    properties:
+      snps,tx-queues-to-use:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: number of TX queues to be used in the driver
+      snps,tx-sched-wrr:
+        type: boolean
+        description: Weighted Round Robin
+      snps,tx-sched-wfq:
+        type: boolean
+        description: Weighted Fair Queuing
+      snps,tx-sched-dwrr:
+        type: boolean
+        description: Deficit Weighted Round Robin
+      snps,tx-sched-sp:
+        type: boolean
+        description: Strict priority
+    allOf:
+      - if:
+          required:
+            - snps,tx-sched-wrr
+        then:
+          properties:
+            snps,tx-sched-wfq: false
+            snps,tx-sched-dwrr: false
+            snps,tx-sched-sp: false
+      - if:
+          required:
+            - snps,tx-sched-wfq
+        then:
+          properties:
+            snps,tx-sched-wrr: false
+            snps,tx-sched-dwrr: false
+            snps,tx-sched-sp: false
+      - if:
+          required:
+            - snps,tx-sched-dwrr
+        then:
+          properties:
+            snps,tx-sched-wrr: false
+            snps,tx-sched-wfq: false
+            snps,tx-sched-sp: false
+      - if:
+          required:
+            - snps,tx-sched-sp
+        then:
+          properties:
+            snps,tx-sched-wrr: false
+            snps,tx-sched-wfq: false
+            snps,tx-sched-dwrr: false
+    patternProperties:
+      "^queue[0-9]$":
+        description: Each subnode represents a queue.
+        type: object
+        properties:
+          snps,weight:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: TX queue weight (if using a DCB weight algorithm)
+          snps,dcb-algorithm:
+            type: boolean
+            description: TX queue will be working in DCB
+          snps,avb-algorithm:
+            type: boolean
+            description:
+              TX queue will be working in AVB.
+              Queue 0 is reserved for legacy traffic and so no AVB is
+              available in this queue.
+          snps,send_slope:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: enable Low Power Interface
+          snps,idle_slope:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: unlock on WoL
+          snps,high_credit:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: max write outstanding req. limit
+          snps,low_credit:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: max read outstanding req. limit
+          snps,priority:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              Bitmask of the tagged frames priorities assigned to the queue.
+              When a PFC frame is received with priorities matching the bitmask,
+              the queue is blocked from transmitting for the pause time specified
+              in the PFC frame.
+        allOf:
+          - if:
+              required:
+                - snps,dcb-algorithm
+            then:
+              properties:
+                snps,avb-algorithm: false
+          - if:
+              required:
+                - snps,avb-algorithm
+            then:
+              properties:
+                snps,dcb-algorithm: false
+                snps,weight: false
+        additionalProperties: false
+    additionalProperties: false
 
   snps,reset-gpio:
     deprecated: true
@@ -463,41 +645,6 @@ additionalProperties: true
 
 examples:
   - |
-    stmmac_axi_setup: stmmac-axi-config {
-        snps,wr_osr_lmt = <0xf>;
-        snps,rd_osr_lmt = <0xf>;
-        snps,blen = <256 128 64 32 0 0 0>;
-    };
-
-    mtl_rx_setup: rx-queues-config {
-        snps,rx-queues-to-use = <1>;
-        snps,rx-sched-sp;
-        queue0 {
-            snps,dcb-algorithm;
-            snps,map-to-dma-channel = <0x0>;
-            snps,priority = <0x0>;
-        };
-    };
-
-    mtl_tx_setup: tx-queues-config {
-        snps,tx-queues-to-use = <2>;
-        snps,tx-sched-wrr;
-        queue0 {
-            snps,weight = <0x10>;
-            snps,dcb-algorithm;
-            snps,priority = <0x0>;
-        };
-
-        queue1 {
-            snps,avb-algorithm;
-            snps,send_slope = <0x1000>;
-            snps,idle_slope = <0x1000>;
-            snps,high_credit = <0x3E800>;
-            snps,low_credit = <0xFFC18000>;
-            snps,priority = <0x1>;
-        };
-    };
-
     gmac0: ethernet@e0800000 {
         compatible = "snps,dwxgmac-2.10", "snps,dwxgmac";
         reg = <0xe0800000 0x8000>;
@@ -516,6 +663,42 @@ examples:
         snps,axi-config = <&stmmac_axi_setup>;
         snps,mtl-rx-config = <&mtl_rx_setup>;
         snps,mtl-tx-config = <&mtl_tx_setup>;
+
+        stmmac_axi_setup: stmmac-axi-config {
+            snps,wr_osr_lmt = <0xf>;
+            snps,rd_osr_lmt = <0xf>;
+            snps,blen = <256 128 64 32 0 0 0>;
+        };
+
+        mtl_rx_setup: rx-queues-config {
+            snps,rx-queues-to-use = <1>;
+            snps,rx-sched-sp;
+            queue0 {
+                snps,dcb-algorithm;
+                snps,map-to-dma-channel = <0x0>;
+                snps,priority = <0x0>;
+            };
+        };
+
+        mtl_tx_setup: tx-queues-config {
+            snps,tx-queues-to-use = <2>;
+            snps,tx-sched-wrr;
+            queue0 {
+                snps,weight = <0x10>;
+                snps,dcb-algorithm;
+                snps,priority = <0x0>;
+            };
+
+            queue1 {
+                snps,avb-algorithm;
+                snps,send_slope = <0x1000>;
+                snps,idle_slope = <0x1000>;
+                snps,high_credit = <0x3E800>;
+                snps,low_credit = <0xFFC18000>;
+                snps,priority = <0x1>;
+            };
+        };
+
         mdio0 {
             #address-cells = <1>;
             #size-cells = <0>;