smsc911x.c: encapsulate enable irq calls

We encapsulate enbale irq functionality in a function call.
As on probe the interrupts will be disabled twice, we delete
one.

Signed-off-by: Matthias Brugger <mbrugger@iseebcn.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index 1466e5d2af44a438e2cf04205edf908b997c6966..54ca99dbb406f6dcd82c77486004fea4dc7a7297 100644 (file)
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -1442,6 +1442,14 @@ smsc911x_set_hw_mac_address(struct smsc911x_data *pdata, u8 dev_addr[6])
        smsc911x_mac_write(pdata, ADDRL, mac_low32);
 }
 
+static void smsc911x_disable_irq_chip(struct net_device *dev)
+{
+       struct smsc911x_data *pdata = netdev_priv(dev);
+
+       smsc911x_reg_write(pdata, INT_EN, 0);
+       smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF);
+}
+
 static int smsc911x_open(struct net_device *dev)
 {
        struct smsc911x_data *pdata = netdev_priv(dev);
@@ -1494,8 +1502,7 @@ static int smsc911x_open(struct net_device *dev)
        spin_unlock_irq(&pdata->mac_lock);
 
        /* Initialise irqs, but leave all sources disabled */
-       smsc911x_reg_write(pdata, INT_EN, 0);
-       smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF);
+       smsc911x_disable_irq_chip(dev);
 
        /* Set interrupt deassertion to 100uS */
        intcfg = ((10 << 24) | INT_CFG_IRQ_EN_);
@@ -2215,9 +2222,6 @@ static int __devinit smsc911x_init(struct net_device *dev)
        if (smsc911x_soft_reset(pdata))
                return -ENODEV;
 
-       /* Disable all interrupt sources until we bring the device up */
-       smsc911x_reg_write(pdata, INT_EN, 0);
-
        ether_setup(dev);
        dev->flags |= IFF_MULTICAST;
        netif_napi_add(dev, &pdata->napi, smsc911x_poll, SMSC_NAPI_WEIGHT);
@@ -2434,8 +2438,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
        smsc911x_reg_write(pdata, INT_CFG, intcfg);
 
        /* Ensure interrupts are globally disabled before connecting ISR */
-       smsc911x_reg_write(pdata, INT_EN, 0);
-       smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF);
+       smsc911x_disable_irq_chip(dev);
 
        retval = request_irq(dev->irq, smsc911x_irqhandler,
                             irq_flags | IRQF_SHARED, dev->name, dev);