This reverts commit 
3241929b67d28c83945d3191c6816a3271fd6b85.
Armada 3720 phy driver (phy-mvebu-a3700-comphy.c) does not return
-EOPNOTSUPP from phy_power_on() callback anymore.
So remove XHCI_SKIP_PHY_INIT flag from xhci_mvebu_a3700_plat_setup() and
then also whole xhci_mvebu_a3700_plat_setup() function which is there just
to handle -EOPNOTSUPP for XHCI_SKIP_PHY_INIT.
xhci plat_setup callback is not used by any other xhci plat driver, so
remove this callback completely.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220203214444.1508-5-kabel@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
 #include <linux/mbus.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
 
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
        return 0;
 }
 
-int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd)
-{
-       struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-       struct device *dev = hcd->self.controller;
-       struct phy *phy;
-       int ret;
-
-       /* Old bindings miss the PHY handle */
-       phy = of_phy_get(dev->of_node, "usb3-phy");
-       if (IS_ERR(phy) && PTR_ERR(phy) == -EPROBE_DEFER)
-               return -EPROBE_DEFER;
-       else if (IS_ERR(phy))
-               goto phy_out;
-
-       ret = phy_init(phy);
-       if (ret)
-               goto phy_put;
-
-       ret = phy_set_mode(phy, PHY_MODE_USB_HOST_SS);
-       if (ret)
-               goto phy_exit;
-
-       ret = phy_power_on(phy);
-       if (ret == -EOPNOTSUPP) {
-               /* Skip initializatin of XHCI PHY when it is unsupported by firmware */
-               dev_warn(dev, "PHY unsupported by firmware\n");
-               xhci->quirks |= XHCI_SKIP_PHY_INIT;
-       }
-       if (ret)
-               goto phy_exit;
-
-       phy_power_off(phy);
-phy_exit:
-       phy_exit(phy);
-phy_put:
-       of_phy_put(phy);
-phy_out:
-
-       return 0;
-}
-
 int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd)
 {
        struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 
 
 #if IS_ENABLED(CONFIG_USB_XHCI_MVEBU)
 int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd);
-int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd);
 int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd);
 #else
 static inline int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd)
        return 0;
 }
 
-static inline int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd)
-{
-       return 0;
-}
-
 static inline int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd)
 {
        return 0;
 
                priv->plat_start(hcd);
 }
 
-static int xhci_priv_plat_setup(struct usb_hcd *hcd)
-{
-       struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
-
-       if (!priv->plat_setup)
-               return 0;
-
-       return priv->plat_setup(hcd);
-}
-
 static int xhci_priv_init_quirk(struct usb_hcd *hcd)
 {
        struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
 };
 
 static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = {
-       .plat_setup = xhci_mvebu_a3700_plat_setup,
        .init_quirk = xhci_mvebu_a3700_init_quirk,
 };
 
 
        hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
        xhci->shared_hcd->tpl_support = hcd->tpl_support;
-
-       if (priv) {
-               ret = xhci_priv_plat_setup(hcd);
-               if (ret)
-                       goto disable_usb_phy;
-       }
-
-       if ((xhci->quirks & XHCI_SKIP_PHY_INIT) || (priv && (priv->quirks & XHCI_SKIP_PHY_INIT)))
+       if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
                hcd->skip_phy_initialization = 1;
 
        if (priv && (priv->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK))
 
 struct xhci_plat_priv {
        const char *firmware_name;
        unsigned long long quirks;
-       int (*plat_setup)(struct usb_hcd *);
        void (*plat_start)(struct usb_hcd *);
        int (*init_quirk)(struct usb_hcd *);
        int (*suspend_quirk)(struct usb_hcd *);