Documentation, dt, socfpga: Add Altera Arria10 L2 cache binding

Add the device tree bindings needed to support the Altera L2 cache on
the Arria10 chip. Since all the peripherals share IRQs, the IRQ fields
are now in the ecc_manager.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: dinguyen@opensource.altera.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux@arm.linux.org.uk
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1458576106-24505-7-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
index 885f93d14ef9534aee439e3141590489a79860b8..37ff9bfea5f41b1f8a7e9bd2a13630c6c04a89c3 100644 (file)
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
@@ -3,6 +3,7 @@ This driver uses the EDAC framework to implement the SOCFPGA ECC Manager.
 The ECC Manager counts and corrects single bit errors and counts/handles
 double bit errors which are uncorrectable.
 
+Cyclone5 and Arria5 ECC Manager
 Required Properties:
 - compatible : Should be "altr,socfpga-ecc-manager"
 - #address-cells: must be 1
@@ -47,3 +48,42 @@ Example:
                        interrupts = <0 178 1>, <0 179 1>;
                };
        };
+
+Arria10 SoCFPGA ECC Manager
+The Arria10 SoC ECC Manager handles the IRQs for each peripheral
+in a shared register instead of individual IRQs like the Cyclone5
+and Arria5. Therefore the device tree is different as well.
+
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-ecc-manager"
+- altr,sysgr-syscon : phandle to Arria10 System Manager Block
+       containing the ECC manager registers.
+- #address-cells: must be 1
+- #size-cells: must be 1
+- interrupts : Should be single bit error interrupt, then double bit error
+       interrupt. Note the rising edge type.
+- ranges : standard definition, should translate from local addresses
+
+Subcomponents:
+
+L2 Cache ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-l2-ecc"
+- reg : Address and size for ECC error interrupt clear registers.
+
+Example:
+
+       eccmgr: eccmgr@ffd06000 {
+               compatible = "altr,socfpga-a10-ecc-manager";
+               altr,sysmgr-syscon = <&sysmgr>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 IRQ_TYPE_LEVEL_HIGH>;
+               ranges;
+
+               l2-ecc@ffd06010 {
+                       compatible = "altr,socfpga-a10-l2-ecc";
+                       reg = <0xffd06010 0x4>;
+               };
+       };