hw/arm/mps2: New board model mps2-an386

Implement a model of the MPS2 with the AN386 firmware. This is
essentially identical to the AN385 firmware, but it has a
Cortex-M4 rather than a Cortex-M3.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200903202048.15370-2-peter.maydell@linaro.org

diff --git a/docs/system/arm/mps2.rst b/docs/system/arm/mps2.rst
index 3a98cb59b0d6f155300104dc02f135354093a4b1..e680a4ceb71b51129d0bf97bc617fb4524f3647a 100644 (file)
--- a/docs/system/arm/mps2.rst
+++ b/docs/system/arm/mps2.rst
@@ -1,5 +1,5 @@
-Arm MPS2 boards (``mps2-an385``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``)
-================================================================================
+Arm MPS2 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``)
+================================================================================================
 
 These board models all use Arm M-profile CPUs.
 
@@ -12,6 +12,8 @@ QEMU models the following FPGA images:
 
 ``mps2-an385``
   Cortex-M3 as documented in ARM Application Note AN385
+``mps2-an386``
+  Cortex-M4 as documented in ARM Application Note AN386
 ``mps2-an511``
   Cortex-M3 'DesignStart' as documented in AN511
 ``mps2-an505``
@@ -21,7 +23,7 @@ QEMU models the following FPGA images:
 
 Differences between QEMU and real hardware:
 
-- AN385 remapping of low 16K of memory to either ZBT SSRAM1 or to
+- AN385/AN386 remapping of low 16K of memory to either ZBT SSRAM1 or to
   block RAM is unimplemented (QEMU always maps this to ZBT SSRAM1, as
   if zbt_boot_ctrl is always zero)
 - QEMU provides a LAN9118 ethernet rather than LAN9220; the only guest

diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c
index 4ee5c38459e6863bdb7e9102d1f22f8de2f8d16f..d3ec73fbe783ffb9ac90739d7856e901987619c5 100644 (file)
--- a/hw/arm/mps2.c
+++ b/hw/arm/mps2.c
@@ -15,6 +15,7 @@
  * as seen by the guest depend significantly on the FPGA image.
  * We model the following FPGA images:
  *  "mps2-an385" -- Cortex-M3 as documented in ARM Application Note AN385
+ *  "mps2-an386" -- Cortex-M4 as documented in ARM Application Note AN386
  *  "mps2-an511" -- Cortex-M3 'DesignStart' as documented in AN511
  *
  * Links to the TRM for the board itself and to the various Application
@@ -48,6 +49,7 @@
 
 typedef enum MPS2FPGAType {
     FPGA_AN385,
+    FPGA_AN386,
     FPGA_AN511,
 } MPS2FPGAType;
 
@@ -82,6 +84,7 @@ typedef struct MPS2MachineState MPS2MachineState;
 
 #define TYPE_MPS2_MACHINE "mps2"
 #define TYPE_MPS2_AN385_MACHINE MACHINE_TYPE_NAME("mps2-an385")
+#define TYPE_MPS2_AN386_MACHINE MACHINE_TYPE_NAME("mps2-an386")
 #define TYPE_MPS2_AN511_MACHINE MACHINE_TYPE_NAME("mps2-an511")
 
 DECLARE_OBJ_CHECKERS(MPS2MachineState, MPS2MachineClass,
@@ -139,9 +142,9 @@ static void mps2_common_init(MachineState *machine)
      * tradeoffs. For QEMU they're all just RAM, though. We arbitrarily
      * call the 16MB our "system memory", as it's the largest lump.
      *
-     * Common to both boards:
-     *  0x21000000..0x21ffffff : PSRAM (16MB)
-     * AN385 only:
+     * AN385/AN386/AN511:
+     *  0x21000000 .. 0x21ffffff : PSRAM (16MB)
+     * AN385/AN386 only:
      *  0x00000000 .. 0x003fffff : ZBT SSRAM1
      *  0x00400000 .. 0x007fffff : mirror of ZBT SSRAM1
      *  0x20000000 .. 0x203fffff : ZBT SSRAM 2&3
@@ -156,7 +159,7 @@ static void mps2_common_init(MachineState *machine)
      *  0x20000000 .. 0x2001ffff : SRAM
      *  0x20400000 .. 0x207fffff : ZBT SSRAM 2&3
      *
-     * The AN385 has a feature where the lowest 16K can be mapped
+     * The AN385/AN386 has a feature where the lowest 16K can be mapped
      * either to the bottom of the ZBT SSRAM1 or to the block RAM.
      * This is of no use for QEMU so we don't implement it (as if
      * zbt_boot_ctrl is always zero).
@@ -165,6 +168,7 @@ static void mps2_common_init(MachineState *machine)
 
     switch (mmc->fpga_type) {
     case FPGA_AN385:
+    case FPGA_AN386:
         make_ram(&mms->ssram1, "mps.ssram1", 0x0, 0x400000);
         make_ram_alias(&mms->ssram1_m, "mps.ssram1_m", &mms->ssram1, 0x400000);
         make_ram(&mms->ssram23, "mps.ssram23", 0x20000000, 0x400000);
@@ -192,6 +196,7 @@ static void mps2_common_init(MachineState *machine)
     armv7m = DEVICE(&mms->armv7m);
     switch (mmc->fpga_type) {
     case FPGA_AN385:
+    case FPGA_AN386:
         qdev_prop_set_uint32(armv7m, "num-irq", 32);
         break;
     case FPGA_AN511:
@@ -228,6 +233,7 @@ static void mps2_common_init(MachineState *machine)
 
     switch (mmc->fpga_type) {
     case FPGA_AN385:
+    case FPGA_AN386:
     {
         /* The overflow IRQs for UARTs 0, 1 and 2 are ORed together.
          * Overflow for UARTs 4 and 5 doesn't trigger any interrupt.
@@ -379,7 +385,7 @@ static void mps2_common_init(MachineState *machine)
      */
     lan9118_init(&nd_table[0], 0x40200000,
                  qdev_get_gpio_in(armv7m,
-                                  mmc->fpga_type == FPGA_AN385 ? 13 : 47));
+                                  mmc->fpga_type == FPGA_AN511 ? 47 : 13));
 
     system_clock_scale = NANOSECONDS_PER_SECOND / SYSCLK_FRQ;
 
@@ -408,6 +414,17 @@ static void mps2_an385_class_init(ObjectClass *oc, void *data)
     mmc->scc_id = 0x41043850;
 }
 
+static void mps2_an386_class_init(ObjectClass *oc, void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+    MPS2MachineClass *mmc = MPS2_MACHINE_CLASS(oc);
+
+    mc->desc = "ARM MPS2 with AN386 FPGA image for Cortex-M4";
+    mmc->fpga_type = FPGA_AN386;
+    mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m4");
+    mmc->scc_id = 0x41043860;
+}
+
 static void mps2_an511_class_init(ObjectClass *oc, void *data)
 {
     MachineClass *mc = MACHINE_CLASS(oc);
@@ -434,6 +451,12 @@ static const TypeInfo mps2_an385_info = {
     .class_init = mps2_an385_class_init,
 };
 
+static const TypeInfo mps2_an386_info = {
+    .name = TYPE_MPS2_AN386_MACHINE,
+    .parent = TYPE_MPS2_MACHINE,
+    .class_init = mps2_an386_class_init,
+};
+
 static const TypeInfo mps2_an511_info = {
     .name = TYPE_MPS2_AN511_MACHINE,
     .parent = TYPE_MPS2_MACHINE,
@@ -444,6 +467,7 @@ static void mps2_machine_init(void)
 {
     type_register_static(&mps2_info);
     type_register_static(&mps2_an385_info);
+    type_register_static(&mps2_an386_info);
     type_register_static(&mps2_an511_info);
 }