arm64: dts: qcom: sm8350-sagami: Configure SLG51000 PMIC on PDX215

Remove the mention of this PMIC from the common DTSI, as it's not
used on PDX214. Add the required nodes to support it on PDX215.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221118152028.59312-2-konrad.dybcio@linaro.org

diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts
index c74c973a69d2d3ef60b5191a8410da6a1a633673..d4afaa393c9a9ce1d266ae6527fa24de1558dc0b 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts
@@ -12,6 +12,72 @@
        compatible = "sony,pdx215-generic", "qcom,sm8350";
 };
 
+&i2c13 {
+       pmic@75 {
+               compatible = "dlg,slg51000";
+               reg = <0x75>;
+               dlg,cs-gpios = <&pm8350b_gpios 1 GPIO_ACTIVE_HIGH>;
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&cam_pwr_a_cs>;
+
+               regulators {
+                       slg51000_a_ldo1: ldo1 {
+                               regulator-name = "slg51000_a_ldo1";
+                               regulator-min-microvolt = <2400000>;
+                               regulator-max-microvolt = <3300000>;
+                       };
+
+                       slg51000_a_ldo2: ldo2 {
+                               regulator-name = "slg51000_a_ldo2";
+                               regulator-min-microvolt = <2400000>;
+                               regulator-max-microvolt = <3300000>;
+                       };
+
+                       slg51000_a_ldo3: ldo3 {
+                               regulator-name = "slg51000_a_ldo3";
+                               regulator-min-microvolt = <1200000>;
+                               regulator-max-microvolt = <3750000>;
+                       };
+
+                       slg51000_a_ldo4: ldo4 {
+                               regulator-name = "slg51000_a_ldo4";
+                               regulator-min-microvolt = <1200000>;
+                               regulator-max-microvolt = <3750000>;
+                       };
+
+                       slg51000_a_ldo5: ldo5 {
+                               regulator-name = "slg51000_a_ldo5";
+                               regulator-min-microvolt = <500000>;
+                               regulator-max-microvolt = <1200000>;
+                       };
+
+                       slg51000_a_ldo6: ldo6 {
+                               regulator-name = "slg51000_a_ldo6";
+                               regulator-min-microvolt = <500000>;
+                               regulator-max-microvolt = <1200000>;
+                       };
+
+                       slg51000_a_ldo7: ldo7 {
+                               regulator-name = "slg51000_a_ldo7";
+                               regulator-min-microvolt = <1200000>;
+                               regulator-max-microvolt = <3750000>;
+                       };
+               };
+       };
+};
+
+&pm8350b_gpios {
+       cam_pwr_a_cs: cam-pwr-a-cs-state {
+               pins = "gpio1";
+               function = "normal";
+               qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+               power-source = <1>;
+               drive-push-pull;
+               output-high;
+       };
+};
+
 &tlmm {
        gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */
                          "APPS_I2C_0_SCL",

diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
index 1f2d660f8f86c39f7e0479005bcc34e784dd3c64..a10306d82a3a15eabe9da7b17ba37ab71da8d952 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
  */
 
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sm8350.dtsi"
 #include "pm8350.dtsi"
@@ -506,7 +507,6 @@
        clock-frequency = <100000>;
 
        /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
-       /* Dialog SLG51000 CMIC @ 75 */
 };
 
 &i2c15 {