{
return ice_clear_phy_tstamp_e810(hw, block, idx);
}
+
+/* E810T SMA functions
+ *
+ * The following functions operate specifically on E810T hardware and are used
+ * to access the extended GPIOs available.
+ */
+
+/**
+ * ice_get_pca9575_handle
+ * @hw: pointer to the hw struct
+ * @pca9575_handle: GPIO controller's handle
+ *
+ * Find and return the GPIO controller's handle in the netlist.
+ * When found - the value will be cached in the hw structure and following calls
+ * will return cached value
+ */
+static int
+ice_get_pca9575_handle(struct ice_hw *hw, u16 *pca9575_handle)
+{
+ struct ice_aqc_get_link_topo *cmd;
+ struct ice_aq_desc desc;
+ int status;
+ u8 idx;
+
+ /* If handle was read previously return cached value */
+ if (hw->io_expander_handle) {
+ *pca9575_handle = hw->io_expander_handle;
+ return 0;
+ }
+
+ /* If handle was not detected read it from the netlist */
+ cmd = &desc.params.get_link_topo;
+ ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_get_link_topo);
+
+ /* Set node type to GPIO controller */
+ cmd->addr.topo_params.node_type_ctx =
+ (ICE_AQC_LINK_TOPO_NODE_TYPE_M &
+ ICE_AQC_LINK_TOPO_NODE_TYPE_GPIO_CTRL);
+
+#define SW_PCA9575_SFP_TOPO_IDX 2
+#define SW_PCA9575_QSFP_TOPO_IDX 1
+
+ /* Check if the SW IO expander controlling SMA exists in the netlist. */
+ if (hw->device_id == ICE_DEV_ID_E810C_SFP)
+ idx = SW_PCA9575_SFP_TOPO_IDX;
+ else if (hw->device_id == ICE_DEV_ID_E810C_QSFP)
+ idx = SW_PCA9575_QSFP_TOPO_IDX;
+ else
+ return -EOPNOTSUPP;
+
+ cmd->addr.topo_params.index = idx;
+
+ status = ice_aq_send_cmd(hw, &desc, NULL, 0, NULL);
+ if (status)
+ return -EOPNOTSUPP;
+
+ /* Verify if we found the right IO expander type */
+ if (desc.params.get_link_topo.node_part_num !=
+ ICE_AQC_GET_LINK_TOPO_NODE_NR_PCA9575)
+ return -EOPNOTSUPP;
+
+ /* If present save the handle and return it */
+ hw->io_expander_handle =
+ le16_to_cpu(desc.params.get_link_topo.addr.handle);
+ *pca9575_handle = hw->io_expander_handle;
+
+ return 0;
+}
+
+/**
+ * ice_read_sma_ctrl_e810t
+ * @hw: pointer to the hw struct
+ * @data: pointer to data to be read from the GPIO controller
+ *
+ * Read the SMA controller state. It is connected to pins 3-7 of Port 1 of the
+ * PCA9575 expander, so only bits 3-7 in data are valid.
+ */
+int ice_read_sma_ctrl_e810t(struct ice_hw *hw, u8 *data)
+{
+ int status;
+ u16 handle;
+ u8 i;
+
+ status = ice_get_pca9575_handle(hw, &handle);
+ if (status)
+ return status;
+
+ *data = 0;
+
+ for (i = ICE_SMA_MIN_BIT_E810T; i <= ICE_SMA_MAX_BIT_E810T; i++) {
+ bool pin;
+
+ status = ice_aq_get_gpio(hw, handle, i + ICE_PCA9575_P1_OFFSET,
+ &pin, NULL);
+ if (status)
+ break;
+ *data |= (u8)(!pin) << i;
+ }
+
+ return status;
+}
+
+/**
+ * ice_write_sma_ctrl_e810t
+ * @hw: pointer to the hw struct
+ * @data: data to be written to the GPIO controller
+ *
+ * Write the data to the SMA controller. It is connected to pins 3-7 of Port 1
+ * of the PCA9575 expander, so only bits 3-7 in data are valid.
+ */
+int ice_write_sma_ctrl_e810t(struct ice_hw *hw, u8 data)
+{
+ int status;
+ u16 handle;
+ u8 i;
+
+ status = ice_get_pca9575_handle(hw, &handle);
+ if (status)
+ return status;
+
+ for (i = ICE_SMA_MIN_BIT_E810T; i <= ICE_SMA_MAX_BIT_E810T; i++) {
+ bool pin;
+
+ pin = !(data & (1 << i));
+ status = ice_aq_set_gpio(hw, handle, i + ICE_PCA9575_P1_OFFSET,
+ pin, NULL);
+ if (status)
+ break;
+ }
+
+ return status;
+}
+
+/**
+ * ice_is_pca9575_present
+ * @hw: pointer to the hw struct
+ *
+ * Check if the SW IO expander is present in the netlist
+ */
+bool ice_is_pca9575_present(struct ice_hw *hw)
+{
+ u16 handle = 0;
+ int status;
+
+ if (!ice_is_e810t(hw))
+ return false;
+
+ status = ice_get_pca9575_handle(hw, &handle);
+
+ return !status && handle;
+}
/* E810 family functions */
int ice_ptp_init_phy_e810(struct ice_hw *hw);
+int ice_read_sma_ctrl_e810t(struct ice_hw *hw, u8 *data);
+int ice_write_sma_ctrl_e810t(struct ice_hw *hw, u8 data);
+bool ice_is_pca9575_present(struct ice_hw *hw);
#define PFTSYN_SEM_BYTES 4
#define LOW_TX_MEMORY_BANK_START 0x03090000
#define HIGH_TX_MEMORY_BANK_START 0x03090004
+/* E810T SMA controller pin control */
+#define ICE_SMA1_DIR_EN_E810T BIT(4)
+#define ICE_SMA1_TX_EN_E810T BIT(5)
+#define ICE_SMA2_UFL2_RX_DIS_E810T BIT(3)
+#define ICE_SMA2_DIR_EN_E810T BIT(6)
+#define ICE_SMA2_TX_EN_E810T BIT(7)
+
+#define ICE_SMA1_MASK_E810T (ICE_SMA1_DIR_EN_E810T | \
+ ICE_SMA1_TX_EN_E810T)
+#define ICE_SMA2_MASK_E810T (ICE_SMA2_UFL2_RX_DIS_E810T | \
+ ICE_SMA2_DIR_EN_E810T | \
+ ICE_SMA2_TX_EN_E810T)
+#define ICE_ALL_SMA_MASK_E810T (ICE_SMA1_MASK_E810T | \
+ ICE_SMA2_MASK_E810T)
+
+#define ICE_SMA_MIN_BIT_E810T 3
+#define ICE_SMA_MAX_BIT_E810T 7
+#define ICE_PCA9575_P1_OFFSET 8
+
#endif /* _ICE_PTP_HW_H_ */
projects / users / jedix / linux-maple.git / commitdiff