usb: chipidea: core: add wakeup support for extcon

If wakeup event occurred by extcon event, it needs to call
ci_irq again since the first ci_irq calling at extcon notifier
only wakes up controller, but do noop for event handling,
it causes the extcon use case can't work well from low power mode.

Cc: <stable@vger.kernel.org>
Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect")
Reported-by: Philippe Schenker <philippe.schenker@toradex.com>
Tested-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200707060601.31907-2-peter.chen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 9a7c53d09ab4f29f41e435257129e1642cf3fb5a..bb133245beed5c1d21f33f74d21191c9a7794427 100644 (file)
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -1243,6 +1243,29 @@ static void ci_controller_suspend(struct ci_hdrc *ci)
        enable_irq(ci->irq);
 }
 
+/*
+ * Handle the wakeup interrupt triggered by extcon connector
+ * We need to call ci_irq again for extcon since the first
+ * interrupt (wakeup int) only let the controller be out of
+ * low power mode, but not handle any interrupts.
+ */
+static void ci_extcon_wakeup_int(struct ci_hdrc *ci)
+{
+       struct ci_hdrc_cable *cable_id, *cable_vbus;
+       u32 otgsc = hw_read_otgsc(ci, ~0);
+
+       cable_id = &ci->platdata->id_extcon;
+       cable_vbus = &ci->platdata->vbus_extcon;
+
+       if (!IS_ERR(cable_id->edev) && ci->is_otg &&
+               (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS))
+               ci_irq(ci->irq, ci);
+
+       if (!IS_ERR(cable_vbus->edev) && ci->is_otg &&
+               (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS))
+               ci_irq(ci->irq, ci);
+}
+
 static int ci_controller_resume(struct device *dev)
 {
        struct ci_hdrc *ci = dev_get_drvdata(dev);
@@ -1275,6 +1298,7 @@ static int ci_controller_resume(struct device *dev)
                enable_irq(ci->irq);
                if (ci_otg_is_fsm_mode(ci))
                        ci_otg_fsm_wakeup_by_srp(ci);
+               ci_extcon_wakeup_int(ci);
        }
 
        return 0;