platform/x86: mlx-platform: Add support for fan capability registers

Provide support for the fan capability registers for the next generation
systems of types MQM87xx, MSN34xx, MSN37xx. These new registers provide
configuration for tachometers and fan drawers connectivity.  Use these
registers for next generation led, fan and hotplug structures in order
to distinguish between the systems which have minor configuration
differences. This reduces the amount of code used to describe such
systems.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

diff --git a/drivers/platform/mellanox/mlxreg-hotplug.c b/drivers/platform/mellanox/mlxreg-hotplug.c
index b6d44550d98cf3fbe95a021b79b23dd1ad54bea2..52314a1ffaaf9f3412d45042c2592cb47707a299 100644 (file)
--- a/drivers/platform/mellanox/mlxreg-hotplug.c
+++ b/drivers/platform/mellanox/mlxreg-hotplug.c
@@ -495,7 +495,9 @@ static int mlxreg_hotplug_set_irq(struct mlxreg_hotplug_priv_data *priv)
 {
        struct mlxreg_core_hotplug_platform_data *pdata;
        struct mlxreg_core_item *item;
-       int i, ret;
+       struct mlxreg_core_data *data;
+       u32 regval;
+       int i, j, ret;
 
        pdata = dev_get_platdata(&priv->pdev->dev);
        item = pdata->items;
@@ -507,6 +509,25 @@ static int mlxreg_hotplug_set_irq(struct mlxreg_hotplug_priv_data *priv)
                if (ret)
                        goto out;
 
+               /*
+                * Verify if hardware configuration requires to disable
+                * interrupt capability for some of components.
+                */
+               data = item->data;
+               for (j = 0; j < item->count; j++, data++) {
+                       /* Verify if the attribute has capability register. */
+                       if (data->capability) {
+                               /* Read capability register. */
+                               ret = regmap_read(priv->regmap,
+                                                 data->capability, &regval);
+                               if (ret)
+                                       goto out;
+
+                               if (!(regval & data->bit))
+                                       item->mask &= ~BIT(j);
+                       }
+               }
+
                /* Set group initial status as mask and unmask group event. */
                if (item->inversed) {
                        item->cache = item->mask;

diff --git a/drivers/platform/x86/mlx-platform.c b/drivers/platform/x86/mlx-platform.c
index 3b795680d81cbe982f388a4d05462427ed8ae8a2..73efb12a420ac6fa4607d2aac7859a66de24bcc6 100644 (file)
--- a/drivers/platform/x86/mlx-platform.c
+++ b/drivers/platform/x86/mlx-platform.c
@@ -68,6 +68,9 @@
 #define MLXPLAT_CPLD_LPC_REG_TACHO10_OFFSET    0xee
 #define MLXPLAT_CPLD_LPC_REG_TACHO11_OFFSET    0xef
 #define MLXPLAT_CPLD_LPC_REG_TACHO12_OFFSET    0xf0
+#define MLXPLAT_CPLD_LPC_REG_FAN_CAP1_OFFSET   0xf5
+#define MLXPLAT_CPLD_LPC_REG_FAN_CAP2_OFFSET   0xf6
+#define MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET        0xf7
 #define MLXPLAT_CPLD_LPC_IO_RANGE              0x100
 #define MLXPLAT_CPLD_LPC_I2C_CH1_OFF           0xdb
 #define MLXPLAT_CPLD_LPC_I2C_CH2_OFF           0xda
@@ -585,36 +588,48 @@ static struct mlxreg_core_data mlxplat_mlxcpld_default_ng_fan_items_data[] = {
                .label = "fan1",
                .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET,
                .mask = BIT(0),
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET,
+               .bit = BIT(0),
                .hpdev.nr = MLXPLAT_CPLD_NR_NONE,
        },
        {
                .label = "fan2",
                .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET,
                .mask = BIT(1),
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET,
+               .bit = BIT(1),
                .hpdev.nr = MLXPLAT_CPLD_NR_NONE,
        },
        {
                .label = "fan3",
                .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET,
                .mask = BIT(2),
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET,
+               .bit = BIT(2),
                .hpdev.nr = MLXPLAT_CPLD_NR_NONE,
        },
        {
                .label = "fan4",
                .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET,
                .mask = BIT(3),
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET,
+               .bit = BIT(3),
                .hpdev.nr = MLXPLAT_CPLD_NR_NONE,
        },
        {
                .label = "fan5",
                .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET,
                .mask = BIT(4),
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET,
+               .bit = BIT(4),
                .hpdev.nr = MLXPLAT_CPLD_NR_NONE,
        },
        {
                .label = "fan6",
                .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET,
                .mask = BIT(5),
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET,
+               .bit = BIT(5),
                .hpdev.nr = MLXPLAT_CPLD_NR_NONE,
        },
 };
@@ -817,61 +832,85 @@ static struct mlxreg_core_data mlxplat_mlxcpld_default_ng_led_data[] = {
                .label = "fan1:green",
                .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET,
                .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET,
+               .bit = BIT(0),
        },
        {
                .label = "fan1:orange",
                .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET,
                .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET,
+               .bit = BIT(0),
        },
        {
                .label = "fan2:green",
                .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET,
                .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET,
+               .bit = BIT(1),
        },
        {
                .label = "fan2:orange",
                .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET,
                .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET,
+               .bit = BIT(1),
        },
        {
                .label = "fan3:green",
                .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET,
                .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET,
+               .bit = BIT(2),
        },
        {
                .label = "fan3:orange",
                .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET,
                .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET,
+               .bit = BIT(2),
        },
        {
                .label = "fan4:green",
                .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET,
                .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET,
+               .bit = BIT(3),
        },
        {
                .label = "fan4:orange",
                .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET,
                .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET,
+               .bit = BIT(3),
        },
        {
                .label = "fan5:green",
                .reg = MLXPLAT_CPLD_LPC_REG_LED4_OFFSET,
                .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET,
+               .bit = BIT(4),
        },
        {
                .label = "fan5:orange",
                .reg = MLXPLAT_CPLD_LPC_REG_LED4_OFFSET,
                .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET,
+               .bit = BIT(4),
        },
        {
                .label = "fan6:green",
                .reg = MLXPLAT_CPLD_LPC_REG_LED4_OFFSET,
                .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET,
+               .bit = BIT(5),
        },
        {
                .label = "fan6:orange",
                .reg = MLXPLAT_CPLD_LPC_REG_LED4_OFFSET,
                .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET,
+               .bit = BIT(5),
        },
 };
 
@@ -1208,61 +1247,85 @@ static struct mlxreg_core_data mlxplat_mlxcpld_default_fan_data[] = {
                .label = "tacho1",
                .reg = MLXPLAT_CPLD_LPC_REG_TACHO1_OFFSET,
                .mask = GENMASK(7, 0),
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_CAP1_OFFSET,
+               .bit = BIT(0),
        },
        {
                .label = "tacho2",
                .reg = MLXPLAT_CPLD_LPC_REG_TACHO2_OFFSET,
                .mask = GENMASK(7, 0),
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_CAP1_OFFSET,
+               .bit = BIT(1),
        },
        {
                .label = "tacho3",
                .reg = MLXPLAT_CPLD_LPC_REG_TACHO3_OFFSET,
                .mask = GENMASK(7, 0),
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_CAP1_OFFSET,
+               .bit = BIT(2),
        },
        {
                .label = "tacho4",
                .reg = MLXPLAT_CPLD_LPC_REG_TACHO4_OFFSET,
                .mask = GENMASK(7, 0),
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_CAP1_OFFSET,
+               .bit = BIT(3),
        },
        {
                .label = "tacho5",
                .reg = MLXPLAT_CPLD_LPC_REG_TACHO5_OFFSET,
                .mask = GENMASK(7, 0),
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_CAP1_OFFSET,
+               .bit = BIT(4),
        },
        {
                .label = "tacho6",
                .reg = MLXPLAT_CPLD_LPC_REG_TACHO6_OFFSET,
                .mask = GENMASK(7, 0),
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_CAP1_OFFSET,
+               .bit = BIT(5),
        },
        {
                .label = "tacho7",
                .reg = MLXPLAT_CPLD_LPC_REG_TACHO7_OFFSET,
                .mask = GENMASK(7, 0),
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_CAP1_OFFSET,
+               .bit = BIT(6),
        },
        {
                .label = "tacho8",
                .reg = MLXPLAT_CPLD_LPC_REG_TACHO8_OFFSET,
                .mask = GENMASK(7, 0),
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_CAP1_OFFSET,
+               .bit = BIT(7),
        },
        {
                .label = "tacho9",
                .reg = MLXPLAT_CPLD_LPC_REG_TACHO9_OFFSET,
                .mask = GENMASK(7, 0),
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_CAP2_OFFSET,
+               .bit = BIT(0),
        },
        {
                .label = "tacho10",
                .reg = MLXPLAT_CPLD_LPC_REG_TACHO10_OFFSET,
                .mask = GENMASK(7, 0),
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_CAP2_OFFSET,
+               .bit = BIT(1),
        },
        {
                .label = "tacho11",
                .reg = MLXPLAT_CPLD_LPC_REG_TACHO11_OFFSET,
                .mask = GENMASK(7, 0),
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_CAP2_OFFSET,
+               .bit = BIT(2),
        },
        {
                .label = "tacho12",
                .reg = MLXPLAT_CPLD_LPC_REG_TACHO12_OFFSET,
                .mask = GENMASK(7, 0),
+               .capability = MLXPLAT_CPLD_LPC_REG_FAN_CAP2_OFFSET,
+               .bit = BIT(3),
        },
 };
 
@@ -1349,6 +1412,9 @@ static bool mlxplat_mlxcpld_readable_reg(struct device *dev, unsigned int reg)
        case MLXPLAT_CPLD_LPC_REG_TACHO11_OFFSET:
        case MLXPLAT_CPLD_LPC_REG_TACHO12_OFFSET:
        case MLXPLAT_CPLD_LPC_REG_PWM_CONTROL_OFFSET:
+       case MLXPLAT_CPLD_LPC_REG_FAN_CAP1_OFFSET:
+       case MLXPLAT_CPLD_LPC_REG_FAN_CAP2_OFFSET:
+       case MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET:
                return true;
        }
        return false;
@@ -1401,6 +1467,9 @@ static bool mlxplat_mlxcpld_volatile_reg(struct device *dev, unsigned int reg)
        case MLXPLAT_CPLD_LPC_REG_TACHO11_OFFSET:
        case MLXPLAT_CPLD_LPC_REG_TACHO12_OFFSET:
        case MLXPLAT_CPLD_LPC_REG_PWM_CONTROL_OFFSET:
+       case MLXPLAT_CPLD_LPC_REG_FAN_CAP1_OFFSET:
+       case MLXPLAT_CPLD_LPC_REG_FAN_CAP2_OFFSET:
+       case MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET:
                return true;
        }
        return false;