writel(0, hsotg->regs + S3C_DAINTMSK);
 
-       dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
-                readl(hsotg->regs + S3C_DIEPCTL0),
-                readl(hsotg->regs + S3C_DOEPCTL0));
+       dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+               readl(hsotg->regs + S3C_DIEPCTL0),
+               readl(hsotg->regs + S3C_DOEPCTL0));
 
        /* enable in and out endpoint interrupts */
        s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt);
        udelay(10);  /* see openiboot */
        __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone);
 
-       dev_info(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL));
+       dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL));
 
        /* S3C_DxEPCTL_USBActEp says RO in manual, but seems to be set by
           writing to the EPCTL register.. */
 
        s3c_hsotg_enqueue_setup(hsotg);
 
-       dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
-                readl(hsotg->regs + S3C_DIEPCTL0),
-                readl(hsotg->regs + S3C_DOEPCTL0));
+       dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+               readl(hsotg->regs + S3C_DIEPCTL0),
+               readl(hsotg->regs + S3C_DOEPCTL0));
 
        /* clear global NAKs */
        writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK,
 
        /* setup fifos */
 
-       dev_info(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
-                readl(hsotg->regs + S3C_GRXFSIZ),
-                readl(hsotg->regs + S3C_GNPTXFSIZ));
+       dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
+               readl(hsotg->regs + S3C_GRXFSIZ),
+               readl(hsotg->regs + S3C_GNPTXFSIZ));
 
        s3c_hsotg_init_fifo(hsotg);
 
 
 static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
 {
+#ifdef DEBUG
        struct device *dev = hsotg->dev;
        void __iomem *regs = hsotg->regs;
        u32 val;
 
        dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n",
                 readl(regs + S3C_DVBUSDIS), readl(regs + S3C_DVBUSPULSE));
+#endif
 }