--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp151.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Protonic MECT1S";
+ compatible = "prt,mect1s", "st,stm32mp151";
+
+ chosen {
+ stdout-path = "serial0:1500000n8";
+ };
+
+ aliases {
+ serial0 = &uart4;
+ ethernet0 = ðernet0;
+ ethernet1 = ðernet1;
+ ethernet2 = ðernet2;
+ ethernet3 = ðernet3;
+ ethernet4 = ðernet4;
+ };
+
+ v3v3: regulator-v3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ v5v: regulator-v5v {
+ compatible = "regulator-fixed";
+ regulator-name = "v5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ led {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_DEBUG;
+ gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&clk_hse {
+ clock-frequency = <24000000>;
+};
+
+&clk_lse {
+ status = "disabled";
+};
+
+ðernet0 {
+ status = "okay";
+ pinctrl-0 = <ðernet0_rmii_pins_a>;
+ pinctrl-1 = <ðernet0_rmii_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rmii";
+ max-speed = <100>;
+ st,eth-clk-sel;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+
+ mdio0: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ };
+};
+
+&{ethernet0_rmii_pins_a/pins1} {
+ pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
+ <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
+ <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
+ <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */
+ <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */
+};
+
+&{ethernet0_rmii_pins_a/pins2} {
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK input */
+ <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */
+};
+
+&{ethernet0_rmii_sleep_pins_a/pins1} {
+ pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
+ <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
+ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */
+ <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */
+ <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */
+};
+
+&mdio0 {
+ /* All this DP83TG720R PHYs can't be probed before switch@0 is
+ * probed so we need to use compatible with PHYid
+ */
+ /* TI DP83TG720R */
+ t1_phy0: ethernet-phy@8 {
+ compatible = "ethernet-phy-id2000.a284";
+ reg = <8>;
+ interrupts-extended = <&gpioi 5 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpioh 13 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10>;
+ reset-deassert-us = <35>;
+ };
+
+ /* TI DP83TG720R */
+ t1_phy1: ethernet-phy@c {
+ compatible = "ethernet-phy-id2000.a284";
+ reg = <12>;
+ interrupts-extended = <&gpioj 0 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpioh 14 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10>;
+ reset-deassert-us = <35>;
+ };
+
+ /* TI DP83TG720R */
+ t1_phy2: ethernet-phy@4 {
+ compatible = "ethernet-phy-id2000.a284";
+ reg = <4>;
+ interrupts-extended = <&gpioi 7 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10>;
+ reset-deassert-us = <35>;
+ };
+
+ /* TI DP83TG720R */
+ t1_phy3: ethernet-phy@d {
+ compatible = "ethernet-phy-id2000.a284";
+ reg = <13>;
+ interrupts-extended = <&gpioi 15 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpioi 13 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <1000>;
+ };
+};
+
+&qspi {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qspi_clk_pins_a
+ &qspi_bk1_pins_a
+ &qspi_cs1_pins_a>;
+ pinctrl-1 = <&qspi_clk_sleep_pins_a
+ &qspi_bk1_sleep_pins_a
+ &qspi_cs1_sleep_pins_a>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&{qspi_bk1_pins_a/pins} {
+ /delete-property/ bias-disable;
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <1>;
+};
+
+&spi2 {
+ pinctrl-0 = <&spi2_pins_b>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpioj 3 GPIO_ACTIVE_LOW>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+
+ switch@0 {
+ compatible = "nxp,sja1105q";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-rx-delay-us = <1>;
+ spi-tx-delay-us = <1>;
+ spi-cpha;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet1: port@0 {
+ reg = <0>;
+ label = "t10";
+ phy-mode = "rgmii-id";
+ phy-handle = <&t1_phy0>;
+ };
+
+ ethernet2: port@1 {
+ reg = <1>;
+ label = "t11";
+ phy-mode = "rgmii-id";
+ phy-handle = <&t1_phy1>;
+ };
+
+ ethernet3: port@2 {
+ reg = <2>;
+ label = "t12";
+ phy-mode = "rgmii-id";
+ phy-handle = <&t1_phy2>;
+ };
+
+ ethernet4: port@3 {
+ reg = <3>;
+ label = "t13";
+ phy-mode = "rgmii-id";
+ phy-handle = <&t1_phy3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "cpu";
+ ethernet = <ðernet0>;
+ phy-mode = "rmii";
+
+ /* RGMII mode is not working properly, using RMII instead. */
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+&uart4 {
+ pinctrl-names = "default", "sleep", "idle";
+ pinctrl-0 = <&uart4_pins_a>;
+ pinctrl-1 = <&uart4_sleep_pins_a>;
+ pinctrl-2 = <&uart4_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+};
+
+&usbh_ehci {
+ status = "okay";
+};
+
+&usbotg_hs {
+ dr_mode = "host";
+ pinctrl-0 = <&usbotg_hs_pins_a>;
+ pinctrl-names = "default";
+ phys = <&usbphyc_port1 0>;
+ phy-names = "usb2-phy";
+ vbus-supply = <&v5v>;
+ status = "okay";
+};
+
+&usbphyc {
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&v3v3>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&v3v3>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = "serial0:1500000n8";
+ };
+
+ aliases {
+ serial0 = &uart4;
+ ethernet0 = ðernet0;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ spi3 = &spi3;
+ spi4 = &spi4;
+ spi5 = &spi5;
+ spi6 = &spi6;
+ };
+
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xC0000000 0x10000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mcuram2: mcuram2@10000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10000000 0x40000>;
+ no-map;
+ };
+
+ vdev0vring0: vdev0vring0@10040000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10040000 0x1000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1@10041000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10041000 0x1000>;
+ no-map;
+ };
+
+ vdev0buffer: vdev0buffer@10042000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10042000 0x4000>;
+ no-map;
+ };
+
+ mcuram: mcuram@30000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x30000000 0x40000>;
+ no-map;
+ };
+
+ retram: retram@38000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x38000000 0x10000>;
+ no-map;
+ };
+ };
+
+ v3v3: regulator-v3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ v5v: regulator-v5v {
+ compatible = "regulator-fixed";
+ regulator-name = "v5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
+
+&adc {
+ /* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */
+ pinctrl-0 = <&adc12_pins_mecsbc>;
+ pinctrl-names = "default";
+ vdd-supply = <&v3v3>;
+ vdda-supply = <&v3v3>;
+ vref-supply = <&v3v3>;
+ status = "okay";
+};
+
+&adc1 {
+ status = "okay";
+
+ channel@0 {
+ reg = <0>;
+ /* 16.5 ck_cycles sampling time */
+ st,min-sample-time-ns = <5000>;
+ label = "p24v_stp";
+ };
+
+ channel@1 {
+ reg = <1>;
+ st,min-sample-time-ns = <5000>;
+ label = "p24v_hpdcm";
+ };
+
+ channel@2 {
+ reg = <2>;
+ st,min-sample-time-ns = <5000>;
+ label = "ain0";
+ };
+
+ channel@3 {
+ reg = <3>;
+ st,min-sample-time-ns = <5000>;
+ label = "hpdcm1_i2";
+ };
+
+ channel@5 {
+ reg = <5>;
+ st,min-sample-time-ns = <5000>;
+ label = "hpout1_i";
+ };
+
+ channel@6 {
+ reg = <6>;
+ st,min-sample-time-ns = <5000>;
+ label = "ain1";
+ };
+
+ channel@9 {
+ reg = <9>;
+ st,min-sample-time-ns = <5000>;
+ label = "hpout0_i";
+ };
+
+ channel@10 {
+ reg = <10>;
+ st,min-sample-time-ns = <5000>;
+ label = "phint0_ain";
+ };
+
+ channel@13 {
+ reg = <13>;
+ st,min-sample-time-ns = <5000>;
+ label = "phint1_ain";
+ };
+
+ channel@15 {
+ reg = <15>;
+ st,min-sample-time-ns = <5000>;
+ label = "hpdcm0_i1";
+ };
+
+ channel@16 {
+ reg = <16>;
+ st,min-sample-time-ns = <5000>;
+ label = "lsin";
+ };
+
+ channel@18 {
+ reg = <18>;
+ st,min-sample-time-ns = <5000>;
+ label = "hpdcm0_i2";
+ };
+
+ channel@19 {
+ reg = <19>;
+ st,min-sample-time-ns = <5000>;
+ label = "hpdcm1_i1";
+ };
+};
+
+&adc2 {
+ status = "okay";
+
+ channel@2 {
+ reg = <2>;
+ /* 16.5 ck_cycles sampling time */
+ st,min-sample-time-ns = <5000>;
+ label = "ain2";
+ };
+
+ channel@6 {
+ reg = <6>;
+ st,min-sample-time-ns = <5000>;
+ label = "ain3";
+ };
+};
+
+ðernet0 {
+ status = "okay";
+ pinctrl-0 = <ðernet0_rgmii_pins_x>;
+ pinctrl-1 = <ðernet0_rgmii_sleep_pins_x>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rgmii-id";
+ max-speed = <1000>;
+ phy-handle = <&phy0>;
+ st,eth-clk-sel;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@8 {
+ reg = <8>;
+ interrupts-extended = <&gpiog 7 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpiog 10 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10>;
+ reset-deassert-us = <35>;
+ };
+ };
+};
+
+&gpiod {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "STP_RESETN", "STP_ENABLEN", "HPOUT0", "HPOUT0_ALERTN";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_d_mecsbc>;
+};
+
+&gpioe {
+ gpio-line-names = "HPOUT0_RESETN", "HPOUT1", "HPOUT1_ALERTN", "",
+ "", "", "HPOUT1_RESETN",
+ "LPOUT0", "LPOUT0_ALERTN", "GPOUT0_RESETN",
+ "LPOUT1", "LPOUT1_ALERTN", "GPOUT1_RESETN",
+ "LPOUT2", "LPOUT2_ALERTN", "GPOUT2_RESETN";
+};
+
+&gpiof {
+ gpio-line-names = "LPOUT3", "LPOUT3_ALERTN", "GPOUT3_RESETN",
+ "LPOUT4", "LPOUT4_ALERTN", "GPOUT4_RESETN",
+ "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpiog {
+ gpio-line-names = "LPOUT5", "LPOUT5_ALERTN", "", "LPOUT5_RESETN",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpioh {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "GPIO0_RESETN", "", "", "",
+ "", "", "", "";
+};
+
+&gpioi {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "HPDCM0_SLEEPN", "HPDCM1_SLEEPN", "GPIO1_RESETN", "",
+ "", "", "", "";
+};
+
+&gpioj {
+ gpio-line-names = "HSIN10", "HSIN11", "HSIN12", "HSIN13",
+ "HSIN14", "HSIN15", "", "",
+ "", "", "", "",
+ "", "RTD_RESETN", "", "";
+};
+
+&gpiok {
+ gpio-line-names = "", "", "HSIN0", "HSIN1",
+ "HSIN2", "HSIN3", "HSIN4", "HSIN5";
+};
+
+&gpioz {
+ gpio-line-names = "", "", "", "HSIN6",
+ "HSIN7", "HSIN8", "HSIN9", "";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ pinctrl-1 = <&i2c2_sleep_pins_a>;
+ status = "okay";
+
+ gpio0: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "HSIN0_BIAS", "HSIN1_BIAS", "HSIN2_BIAS", "HSIN3_BIAS",
+ "", "", "HSIN_VREF0_LVL", "HSIN_VREF1_LVL",
+ "HSIN4_BIAS", "HSIN5_BIAS", "HSIN6_BIAS", "HSIN9_BIAS",
+ "", "", "", "";
+ };
+
+ gpio1: gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "HSIN8_BIAS", "HSIN9_BIAS", "HSIN10_BIAS", "HSIN11_BIAS",
+ "", "", "HSIN_VREF2_LVL", "HSIN_VREF3_LVL",
+ "HSIN12_BIAS", "HSIN13_BIAS", "HSIN14_BIAS", "HSIN15_BIAS",
+ "", "", "LSIN8_BIAS", "LSIN9_BIAS";
+ };
+};
+
+&qspi {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qspi_clk_pins_a
+ &qspi_bk1_pins_a
+ &qspi_cs1_pins_a>;
+ pinctrl-1 = <&qspi_clk_sleep_pins_a
+ &qspi_bk1_sleep_pins_a
+ &qspi_cs1_sleep_pins_a>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <104000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&{qspi_bk1_pins_a/pins} {
+ pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+ <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+ <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+ <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
+ /delete-property/ bias-disable;
+ bias-pull-up;
+};
+
+&timers1 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+
+ hpdcm0_pwm: pwm {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pwm1_pins_mecio1>;
+ pinctrl-1 = <&pwm1_sleep_pins_mecio1>;
+ status = "okay";
+ };
+};
+
+&timers8 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+
+ hpdcm1_pwm: pwm {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pwm8_pins_mecio1>;
+ pinctrl-1 = <&pwm8_sleep_pins_mecio1>;
+ status = "okay";
+ };
+};
+
+&uart4 {
+ pinctrl-names = "default", "sleep", "idle";
+ pinctrl-0 = <&uart4_pins_a>;
+ pinctrl-1 = <&uart4_sleep_pins_a>;
+ pinctrl-2 = <&uart4_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+};
+
+&{uart4_pins_a/pins1} {
+ pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
+};
+
+&{uart4_pins_a/pins2} {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ /delete-property/ bias-disable;
+ bias-pull-up;
+};
+
+&usbotg_hs {
+ dr_mode = "host";
+ pinctrl-0 = <&usbotg_hs_pins_a>;
+ pinctrl-names = "default";
+ phys = <&usbphyc_port1 0>;
+ phy-names = "usb2-phy";
+ vbus-supply = <&v5v>;
+ status = "okay";
+};
+
+&usbphyc {
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&v3v3>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&v3v3>;
+};
+
+&pinctrl {
+ adc12_pins_mecsbc: adc12-ain-mecsbc-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* ADC1_INP2 */
+ <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1_INP6 */
+ <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2_INP2 */
+ <STM32_PINMUX('F', 14, ANALOG)>, /* ADC2_INP6 */
+ <STM32_PINMUX('A', 0, ANALOG)>, /* ADC1_INP16 */
+ <STM32_PINMUX('A', 3, ANALOG)>, /* ADC1_INP15 */
+ <STM32_PINMUX('A', 4, ANALOG)>, /* ADC1_INP18 */
+ <STM32_PINMUX('A', 5, ANALOG)>, /* ADC1_INP19 */
+ <STM32_PINMUX('A', 6, ANALOG)>, /* ADC1_INP3 */
+ <STM32_PINMUX('B', 0, ANALOG)>, /* ADC1_INP9 */
+ <STM32_PINMUX('B', 1, ANALOG)>, /* ADC1_INP5 */
+ <STM32_PINMUX('C', 0, ANALOG)>, /* ADC1_INP10 */
+ <STM32_PINMUX('C', 3, ANALOG)>; /* ADC1_INP13 */
+ };
+ };
+
+ pinctrl_hog_d_mecsbc: hog-d-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 12, GPIO)>; /* STP_RESETn */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm1_pins_mecio1: pwm1-mecio1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */
+ <STM32_PINMUX('A', 8, AF1)>; /* TIM1_CH2 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm1_sleep_pins_mecio1: pwm1-sleep-mecio1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* TIM1_CH1 */
+ <STM32_PINMUX('A', 8, ANALOG)>; /* TIM1_CH2 */
+ };
+ };
+
+ pwm8_pins_mecio1: pwm8-mecio1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 5, AF3)>, /* TIM8_CH1 */
+ <STM32_PINMUX('I', 6, AF3)>; /* TIM8_CH2 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm8_sleep_pins_mecio1: pwm8-sleep-mecio1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* TIM8_CH1 */
+ <STM32_PINMUX('I', 6, ANALOG)>; /* TIM8_CH2 */
+ };
+ };
+
+ ethernet0_rgmii_pins_x: rgmii-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('B', 12, AF11)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('B', 13, AF11)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('B', 8, AF11)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+ <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+ bias-disable;
+ };
+ };
+
+ ethernet0_rgmii_sleep_pins_x: rgmii-sleep-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('B', 12, ANALOG)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('B', 13, ANALOG)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('B', 8, ANALOG)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+ <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('H', 7, ANALOG)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+ <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+ };
+ };
+};
projects / linux.git / commitdiff