net: dsa: loop: PVID should be per-port

The PVID should be per-port, this is a preliminary change to support a
802.1Q data path in the driver.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/dsa/dsa_loop.c b/drivers/net/dsa/dsa_loop.c
index f8bc85a6e6708317457793e465edacdbb72c1c1f..4a57238cdfd8c2b298c1b90b29ce61ee99fee502 100644 (file)
--- a/drivers/net/dsa/dsa_loop.c
+++ b/drivers/net/dsa/dsa_loop.c
@@ -45,6 +45,7 @@ static struct dsa_loop_mib_entry dsa_loop_mibs[] = {
 
 struct dsa_loop_port {
        struct dsa_loop_mib_entry mib[__DSA_LOOP_CNT_MAX];
+       u16 pvid;
 };
 
 #define DSA_LOOP_VLANS 5
@@ -55,7 +56,6 @@ struct dsa_loop_priv {
        struct dsa_loop_vlan vlans[DSA_LOOP_VLANS];
        struct net_device *netdev;
        struct dsa_loop_port ports[DSA_MAX_PORTS];
-       u16 pvid;
 };
 
 static struct phy_device *phydevs[PHY_MAX_ADDR];
@@ -224,7 +224,7 @@ static void dsa_loop_port_vlan_add(struct dsa_switch *ds, int port,
        }
 
        if (pvid)
-               ps->pvid = vid;
+               ps->ports[port].pvid = vid;
 }
 
 static int dsa_loop_port_vlan_del(struct dsa_switch *ds, int port,
@@ -234,7 +234,7 @@ static int dsa_loop_port_vlan_del(struct dsa_switch *ds, int port,
        struct dsa_loop_priv *ps = ds->priv;
        struct mii_bus *bus = ps->bus;
        struct dsa_loop_vlan *vl;
-       u16 vid, pvid = ps->pvid;
+       u16 vid, pvid = ps->ports[port].pvid;
 
        /* Just do a sleeping operation to make lockdep checks effective */
        mdiobus_read(bus, ps->port_base + port, MII_BMSR);
@@ -252,7 +252,7 @@ static int dsa_loop_port_vlan_del(struct dsa_switch *ds, int port,
                dev_dbg(ds->dev, "%s: port: %d vlan: %d, %stagged, pvid: %d\n",
                        __func__, port, vid, untagged ? "un" : "", pvid);
        }
-       ps->pvid = pvid;
+       ps->ports[port].pvid = pvid;
 
        return 0;
 }