bool dynamic;
};
+/**
+ * struct ppe_qm_queue_config - PPE queue config.
+ * @queue_start: PPE start of queue ID.
+ * @queue_end: PPE end of queue ID.
+ * @prealloc_buf: Queue dedicated buffer number.
+ * @ceil: Ceil to start drop packet from queue.
+ * @weight: Weight value.
+ * @resume_offset: Resume offset from the threshold.
+ * @dynamic: Threshold value is decided dynamically or statically.
+ *
+ * Queue configuration decides the threshold to drop packet from PPE
+ * hardware queue.
+ */
+struct ppe_qm_queue_config {
+ unsigned int queue_start;
+ unsigned int queue_end;
+ unsigned int prealloc_buf;
+ unsigned int ceil;
+ unsigned int weight;
+ unsigned int resume_offset;
+ bool dynamic;
+};
+
/* There are total 2048 buffers available in PPE, out of which some
* buffers are reserved for some specific purposes per PPE port. The
* rest of the pool of 1550 buffers are assigned to the general 'group0'
},
};
+/* QM fetches the packet from PPE buffer management for transmitting the
+ * packet out. The QM group configuration limits the total number of buffers
+ * enqueued by all PPE hardware queues.
+ * There are total 2048 buffers available, out of which some buffers are
+ * dedicated to hardware exception handlers. The remaining buffers are
+ * assigned to the general 'group0', which is the group assigned to all
+ * queues by default.
+ */
+static const int ipq9574_ppe_qm_group_config = 2000;
+
+/* Default QM settings for unicast and multicast queues for IPQ9754. */
+static const struct ppe_qm_queue_config ipq9574_ppe_qm_queue_config[] = {
+ {
+ /* QM settings for unicast queues 0 to 255. */
+ .queue_start = 0,
+ .queue_end = 255,
+ .prealloc_buf = 0,
+ .ceil = 1200,
+ .weight = 7,
+ .resume_offset = 36,
+ .dynamic = true,
+ },
+ {
+ /* QM settings for multicast queues 256 to 299. */
+ .queue_start = 256,
+ .queue_end = 299,
+ .prealloc_buf = 0,
+ .ceil = 250,
+ .weight = 0,
+ .resume_offset = 36,
+ .dynamic = false,
+ },
+};
+
static int ppe_config_bm_threshold(struct ppe_device *ppe_dev, int bm_port_id,
const struct ppe_bm_port_config port_cfg)
{
return ret;
}
+/* Configure PPE hardware queue depth, which is decided by the threshold
+ * of queue.
+ */
+static int ppe_config_qm(struct ppe_device *ppe_dev)
+{
+ const struct ppe_qm_queue_config *queue_cfg;
+ int ret, i, queue_id, queue_cfg_count;
+ u32 reg, multicast_queue_cfg[5];
+ u32 unicast_queue_cfg[4];
+ u32 group_cfg[3];
+
+ /* Assign the buffer number to the group 0 by default. */
+ reg = PPE_AC_GRP_CFG_TBL_ADDR;
+ ret = regmap_bulk_read(ppe_dev->regmap, reg,
+ group_cfg, ARRAY_SIZE(group_cfg));
+ if (ret)
+ goto qm_config_fail;
+
+ PPE_AC_GRP_SET_BUF_LIMIT(group_cfg, ipq9574_ppe_qm_group_config);
+
+ ret = regmap_bulk_write(ppe_dev->regmap, reg,
+ group_cfg, ARRAY_SIZE(group_cfg));
+ if (ret)
+ goto qm_config_fail;
+
+ queue_cfg = ipq9574_ppe_qm_queue_config;
+ queue_cfg_count = ARRAY_SIZE(ipq9574_ppe_qm_queue_config);
+ for (i = 0; i < queue_cfg_count; i++) {
+ queue_id = queue_cfg[i].queue_start;
+
+ /* Configure threshold for dropping packets separately for
+ * unicast and multicast PPE queues.
+ */
+ while (queue_id <= queue_cfg[i].queue_end) {
+ if (queue_id < PPE_AC_UNICAST_QUEUE_CFG_TBL_ENTRIES) {
+ reg = PPE_AC_UNICAST_QUEUE_CFG_TBL_ADDR +
+ PPE_AC_UNICAST_QUEUE_CFG_TBL_INC * queue_id;
+
+ ret = regmap_bulk_read(ppe_dev->regmap, reg,
+ unicast_queue_cfg,
+ ARRAY_SIZE(unicast_queue_cfg));
+ if (ret)
+ goto qm_config_fail;
+
+ PPE_AC_UNICAST_QUEUE_SET_EN(unicast_queue_cfg, true);
+ PPE_AC_UNICAST_QUEUE_SET_GRP_ID(unicast_queue_cfg, 0);
+ PPE_AC_UNICAST_QUEUE_SET_PRE_LIMIT(unicast_queue_cfg,
+ queue_cfg[i].prealloc_buf);
+ PPE_AC_UNICAST_QUEUE_SET_DYNAMIC(unicast_queue_cfg,
+ queue_cfg[i].dynamic);
+ PPE_AC_UNICAST_QUEUE_SET_WEIGHT(unicast_queue_cfg,
+ queue_cfg[i].weight);
+ PPE_AC_UNICAST_QUEUE_SET_THRESHOLD(unicast_queue_cfg,
+ queue_cfg[i].ceil);
+ PPE_AC_UNICAST_QUEUE_SET_GRN_RESUME(unicast_queue_cfg,
+ queue_cfg[i].resume_offset);
+
+ ret = regmap_bulk_write(ppe_dev->regmap, reg,
+ unicast_queue_cfg,
+ ARRAY_SIZE(unicast_queue_cfg));
+ if (ret)
+ goto qm_config_fail;
+ } else {
+ reg = PPE_AC_MULTICAST_QUEUE_CFG_TBL_ADDR +
+ PPE_AC_MULTICAST_QUEUE_CFG_TBL_INC * queue_id;
+
+ ret = regmap_bulk_read(ppe_dev->regmap, reg,
+ multicast_queue_cfg,
+ ARRAY_SIZE(multicast_queue_cfg));
+ if (ret)
+ goto qm_config_fail;
+
+ PPE_AC_MULTICAST_QUEUE_SET_EN(multicast_queue_cfg, true);
+ PPE_AC_MULTICAST_QUEUE_SET_GRN_GRP_ID(multicast_queue_cfg, 0);
+ PPE_AC_MULTICAST_QUEUE_SET_GRN_PRE_LIMIT(multicast_queue_cfg,
+ queue_cfg[i].prealloc_buf);
+ PPE_AC_MULTICAST_QUEUE_SET_GRN_THRESHOLD(multicast_queue_cfg,
+ queue_cfg[i].ceil);
+ PPE_AC_MULTICAST_QUEUE_SET_GRN_RESUME(multicast_queue_cfg,
+ queue_cfg[i].resume_offset);
+
+ ret = regmap_bulk_write(ppe_dev->regmap, reg,
+ multicast_queue_cfg,
+ ARRAY_SIZE(multicast_queue_cfg));
+ if (ret)
+ goto qm_config_fail;
+ }
+
+ /* Enable enqueue. */
+ reg = PPE_ENQ_OPR_TBL_ADDR + PPE_ENQ_OPR_TBL_INC * queue_id;
+ ret = regmap_clear_bits(ppe_dev->regmap, reg,
+ PPE_ENQ_OPR_TBL_ENQ_DISABLE);
+ if (ret)
+ goto qm_config_fail;
+
+ /* Enable dequeue. */
+ reg = PPE_DEQ_OPR_TBL_ADDR + PPE_DEQ_OPR_TBL_INC * queue_id;
+ ret = regmap_clear_bits(ppe_dev->regmap, reg,
+ PPE_DEQ_OPR_TBL_DEQ_DISABLE);
+ if (ret)
+ goto qm_config_fail;
+
+ queue_id++;
+ }
+ }
+
+ /* Enable queue counter for all PPE hardware queues. */
+ ret = regmap_set_bits(ppe_dev->regmap, PPE_EG_BRIDGE_CONFIG_ADDR,
+ PPE_EG_BRIDGE_CONFIG_QUEUE_CNT_EN);
+ if (ret)
+ goto qm_config_fail;
+
+ return 0;
+
+qm_config_fail:
+ dev_err(ppe_dev->dev, "PPE QM config error %d\n", ret);
+ return ret;
+}
+
int ppe_hw_config(struct ppe_device *ppe_dev)
{
- return ppe_config_bm(ppe_dev);
+ int ret;
+
+ ret = ppe_config_bm(ppe_dev);
+ if (ret)
+ return ret;
+
+ return ppe_config_qm(ppe_dev);
}
#include <linux/bitfield.h>
+/* PPE queue counters enable/disable control. */
+#define PPE_EG_BRIDGE_CONFIG_ADDR 0x20044
+#define PPE_EG_BRIDGE_CONFIG_QUEUE_CNT_EN BIT(2)
+
+/* Table addresses for per-queue dequeue setting. */
+#define PPE_DEQ_OPR_TBL_ADDR 0x430000
+#define PPE_DEQ_OPR_TBL_ENTRIES 300
+#define PPE_DEQ_OPR_TBL_INC 0x10
+#define PPE_DEQ_OPR_TBL_DEQ_DISABLE BIT(0)
+
/* There are 15 BM ports and 4 BM groups supported by PPE.
* BM port (0-7) is for EDMA port 0, BM port (8-13) is for
* PPE physical port 1-6 and BM port 14 is for EIP port.
FIELD_MODIFY(PPE_BM_PORT_FC_W1_DYNAMIC, (tbl_cfg) + 0x1, value)
#define PPE_BM_PORT_FC_SET_PRE_ALLOC(tbl_cfg, value) \
FIELD_MODIFY(PPE_BM_PORT_FC_W1_PRE_ALLOC, (tbl_cfg) + 0x1, value)
+
+/* PPE unicast queue (0-255) configurations. */
+#define PPE_AC_UNICAST_QUEUE_CFG_TBL_ADDR 0x848000
+#define PPE_AC_UNICAST_QUEUE_CFG_TBL_ENTRIES 256
+#define PPE_AC_UNICAST_QUEUE_CFG_TBL_INC 0x10
+#define PPE_AC_UNICAST_QUEUE_CFG_W0_EN BIT(0)
+#define PPE_AC_UNICAST_QUEUE_CFG_W0_WRED_EN BIT(1)
+#define PPE_AC_UNICAST_QUEUE_CFG_W0_FC_EN BIT(2)
+#define PPE_AC_UNICAST_QUEUE_CFG_W0_CLR_AWARE BIT(3)
+#define PPE_AC_UNICAST_QUEUE_CFG_W0_GRP_ID GENMASK(5, 4)
+#define PPE_AC_UNICAST_QUEUE_CFG_W0_PRE_LIMIT GENMASK(16, 6)
+#define PPE_AC_UNICAST_QUEUE_CFG_W0_DYNAMIC BIT(17)
+#define PPE_AC_UNICAST_QUEUE_CFG_W0_WEIGHT GENMASK(20, 18)
+#define PPE_AC_UNICAST_QUEUE_CFG_W0_THRESHOLD GENMASK(31, 21)
+#define PPE_AC_UNICAST_QUEUE_CFG_W3_GRN_RESUME GENMASK(23, 13)
+
+#define PPE_AC_UNICAST_QUEUE_SET_EN(tbl_cfg, value) \
+ FIELD_MODIFY(PPE_AC_UNICAST_QUEUE_CFG_W0_EN, tbl_cfg, value)
+#define PPE_AC_UNICAST_QUEUE_SET_GRP_ID(tbl_cfg, value) \
+ FIELD_MODIFY(PPE_AC_UNICAST_QUEUE_CFG_W0_GRP_ID, tbl_cfg, value)
+#define PPE_AC_UNICAST_QUEUE_SET_PRE_LIMIT(tbl_cfg, value) \
+ FIELD_MODIFY(PPE_AC_UNICAST_QUEUE_CFG_W0_PRE_LIMIT, tbl_cfg, value)
+#define PPE_AC_UNICAST_QUEUE_SET_DYNAMIC(tbl_cfg, value) \
+ FIELD_MODIFY(PPE_AC_UNICAST_QUEUE_CFG_W0_DYNAMIC, tbl_cfg, value)
+#define PPE_AC_UNICAST_QUEUE_SET_WEIGHT(tbl_cfg, value) \
+ FIELD_MODIFY(PPE_AC_UNICAST_QUEUE_CFG_W0_WEIGHT, tbl_cfg, value)
+#define PPE_AC_UNICAST_QUEUE_SET_THRESHOLD(tbl_cfg, value) \
+ FIELD_MODIFY(PPE_AC_UNICAST_QUEUE_CFG_W0_THRESHOLD, tbl_cfg, value)
+#define PPE_AC_UNICAST_QUEUE_SET_GRN_RESUME(tbl_cfg, value) \
+ FIELD_MODIFY(PPE_AC_UNICAST_QUEUE_CFG_W3_GRN_RESUME, (tbl_cfg) + 0x3, value)
+
+/* PPE multicast queue (256-299) configurations. */
+#define PPE_AC_MULTICAST_QUEUE_CFG_TBL_ADDR 0x84a000
+#define PPE_AC_MULTICAST_QUEUE_CFG_TBL_ENTRIES 44
+#define PPE_AC_MULTICAST_QUEUE_CFG_TBL_INC 0x10
+#define PPE_AC_MULTICAST_QUEUE_CFG_W0_EN BIT(0)
+#define PPE_AC_MULTICAST_QUEUE_CFG_W0_FC_EN BIT(1)
+#define PPE_AC_MULTICAST_QUEUE_CFG_W0_CLR_AWARE BIT(2)
+#define PPE_AC_MULTICAST_QUEUE_CFG_W0_GRP_ID GENMASK(4, 3)
+#define PPE_AC_MULTICAST_QUEUE_CFG_W0_PRE_LIMIT GENMASK(15, 5)
+#define PPE_AC_MULTICAST_QUEUE_CFG_W0_THRESHOLD GENMASK(26, 16)
+#define PPE_AC_MULTICAST_QUEUE_CFG_W2_RESUME GENMASK(17, 7)
+
+#define PPE_AC_MULTICAST_QUEUE_SET_EN(tbl_cfg, value) \
+ FIELD_MODIFY(PPE_AC_MULTICAST_QUEUE_CFG_W0_EN, tbl_cfg, value)
+#define PPE_AC_MULTICAST_QUEUE_SET_GRN_GRP_ID(tbl_cfg, value) \
+ FIELD_MODIFY(PPE_AC_MULTICAST_QUEUE_CFG_W0_GRP_ID, tbl_cfg, value)
+#define PPE_AC_MULTICAST_QUEUE_SET_GRN_PRE_LIMIT(tbl_cfg, value) \
+ FIELD_MODIFY(PPE_AC_MULTICAST_QUEUE_CFG_W0_PRE_LIMIT, tbl_cfg, value)
+#define PPE_AC_MULTICAST_QUEUE_SET_GRN_THRESHOLD(tbl_cfg, value) \
+ FIELD_MODIFY(PPE_AC_MULTICAST_QUEUE_CFG_W0_THRESHOLD, tbl_cfg, value)
+#define PPE_AC_MULTICAST_QUEUE_SET_GRN_RESUME(tbl_cfg, value) \
+ FIELD_MODIFY(PPE_AC_MULTICAST_QUEUE_CFG_W2_RESUME, (tbl_cfg) + 0x2, value)
+
+/* PPE admission control group (0-3) configurations */
+#define PPE_AC_GRP_CFG_TBL_ADDR 0x84c000
+#define PPE_AC_GRP_CFG_TBL_ENTRIES 0x4
+#define PPE_AC_GRP_CFG_TBL_INC 0x10
+#define PPE_AC_GRP_W0_AC_EN BIT(0)
+#define PPE_AC_GRP_W0_AC_FC_EN BIT(1)
+#define PPE_AC_GRP_W0_CLR_AWARE BIT(2)
+#define PPE_AC_GRP_W0_THRESHOLD_LOW GENMASK(31, 25)
+#define PPE_AC_GRP_W1_THRESHOLD_HIGH GENMASK(3, 0)
+#define PPE_AC_GRP_W1_BUF_LIMIT GENMASK(14, 4)
+#define PPE_AC_GRP_W2_RESUME_GRN GENMASK(15, 5)
+#define PPE_AC_GRP_W2_PRE_ALLOC GENMASK(26, 16)
+
+#define PPE_AC_GRP_SET_BUF_LIMIT(tbl_cfg, value) \
+ FIELD_MODIFY(PPE_AC_GRP_W1_BUF_LIMIT, (tbl_cfg) + 0x1, value)
+
+/* Table addresses for per-queue enqueue setting. */
+#define PPE_ENQ_OPR_TBL_ADDR 0x85c000
+#define PPE_ENQ_OPR_TBL_ENTRIES 300
+#define PPE_ENQ_OPR_TBL_INC 0x10
+#define PPE_ENQ_OPR_TBL_ENQ_DISABLE BIT(0)
#endif
projects / users / griffoul / linux.git / commitdiff