media: dt-bindings: Add ch7322 media i2c device

The ch7322 is a Chrontel CEC controller.

Signed-off-by: Jeff Chase <jnchase@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
new file mode 100644 (file)
index 0000000..daa2869
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/i2c/chrontel,ch7322.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Chrontel HDMI-CEC Controller
+
+maintainers:
+  - Jeff Chase <jnchase@google.com>
+
+description:
+  The Chrontel CH7322 is a discrete HDMI-CEC controller. It is
+  programmable through I2C and drives a single CEC line.
+
+properties:
+  compatible:
+    const: chrontel,ch7322
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Reference to the GPIO connected to the RESET pin, if any. This
+      pin is active-low.
+    maxItems: 1
+
+  standby-gpios:
+    description:
+      Reference to the GPIO connected to the OE pin, if any. When low
+      the device will respond to power status requests with "standby"
+      if in auto mode.
+    maxItems: 1
+
+  # see ../cec.txt
+  hdmi-phandle:
+    description: phandle to the HDMI controller
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ch7322@75 {
+        compatible = "chrontel,ch7322";
+        reg = <0x75>;
+        interrupts = <47 IRQ_TYPE_EDGE_RISING>;
+        standby-gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+        reset-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+        hdmi-phandle = <&hdmi>;
+      };
+    };

diff --git a/MAINTAINERS b/MAINTAINERS
index 634d2c3d621aa5386fa4d488c7cd8e1cde9bce41..9982c7c12af92530db17fe4654e305b6ffc84f25 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4101,6 +4101,13 @@ F:       drivers/power/supply/cros_usbpd-charger.c
 N:     cros_ec
 N:     cros-ec
 
+CHRONTEL CH7322 CEC DRIVER
+M:     Jeff Chase <jnchase@google.com>
+L:     linux-media@vger.kernel.org
+S:     Maintained
+T:     git git://linuxtv.org/media_tree.git
+F:     Documentation/devicetree/bindings/media/i2c/chontel,ch7322.yaml
+
 CIRRUS LOGIC AUDIO CODEC DRIVERS
 M:     James Schulman <james.schulman@cirrus.com>
 M:     David Rhodes <david.rhodes@cirrus.com>