usb: dt-bindings: ti,twl4030-usb: convert to DT schema

Convert the legacy TXT binding for the TWL4030 USB module
to the modern YAML DT schema format. This adds formal validation
and improves documentation using a conditional schema.

Remove the twl4030 section from the obsolete .txt binding file

Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250824112338.64953-2-jihed.chaibi.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/Documentation/devicetree/bindings/usb/ti,twl4030-usb.yaml b/Documentation/devicetree/bindings/usb/ti,twl4030-usb.yaml
new file mode 100644 (file)
index 0000000..6ef3375
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,twl4030-usb.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,twl4030-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TWL4030 USB PHY and Comparator
+
+maintainers:
+  - Peter Ujfalusi <peter.ujfalusi@gmail.com>
+
+description:
+  Bindings for the USB PHY and comparator module found within the
+  TWL4030 family of companion chips. If a sibling node is compatible with
+  "ti,twl4030-bci", the driver for that node will query this device for
+  USB power status.
+
+properties:
+  compatible:
+    const: ti,twl4030-usb
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: OTG interrupt number for ID events.
+      - description: USB interrupt number for VBUS events.
+
+  usb1v5-supply:
+    description: Phandle to the vusb1v5 regulator.
+
+  usb1v8-supply:
+    description: Phandle to the vusb1v8 regulator.
+
+  usb3v1-supply:
+    description: Phandle to the vusb3v1 regulator.
+
+  usb_mode:
+    description: |
+      The mode used by the PHY to connect to the controller:
+        1: ULPI mode
+        2: CEA2011_3PIN mode
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - interrupts
+  - usb1v5-supply
+  - usb1v8-supply
+  - usb3v1-supply
+  - usb_mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    usb-phy {
+        compatible = "ti,twl4030-usb";
+
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-parent = <&gic>;
+
+        usb1v5-supply = <&reg_vusb1v5>;
+        usb1v8-supply = <&reg_vusb1v8>;
+        usb3v1-supply  = <&reg_vusb3v1>;
+        usb_mode = <1>;
+
+        #phy-cells = <0>;
+    };

diff --git a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
index 17327a296110a49814cc7b725a0fb111a2ae55da..7194c9504b28ede827a80ed913978002e00cc0f8 100644 (file)
--- a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
@@ -19,25 +19,3 @@ Board specific device node entry
 &twl6030-usb {
        usb-supply = <&vusb>;
 };
-
-TWL4030 USB PHY AND COMPARATOR
- - compatible : Should be "ti,twl4030-usb"
- - interrupts : The interrupt numbers to the cpu should be specified. First
-   interrupt number is the otg interrupt number that raises ID interrupts
-   and VBUS interrupts. The second interrupt number is optional.
- - <supply-name>-supply : phandle to the regulator device tree node.
-   <supply-name> should be vusb1v5, vusb1v8 and vusb3v1
- - usb_mode : The mode used by the phy to connect to the controller. "1"
-   specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode.
-
-If a sibling node is compatible "ti,twl4030-bci", then it will find
-this device and query it for USB power status.
-
-twl4030-usb {
-       compatible = "ti,twl4030-usb";
-       interrupts = < 10 4 >;
-       usb1v5-supply = <&vusb1v5>;
-       usb1v8-supply = <&vusb1v8>;
-       usb3v1-supply = <&vusb3v1>;
-       usb_mode = <1>;
-};