net: dsa: mv88e6xxx: Fix binding documentation for MDIO busses

The MDIO busses are switch properties and so should be inside the
switch node. Fix the examples in the binding document.

Reported-by: 尤晓杰 <yxj790222@163.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses")
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt
index 1d4d0f49c9d06eb66d9957fb0661cec35ddc7af9..8c033d48e2baf05efc326dafbe74b93ff98bae87 100644 (file)
--- a/Documentation/devicetree/bindings/net/dsa/marvell.txt
+++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt
@@ -50,14 +50,15 @@ Example:
                        compatible = "marvell,mv88e6085";
                        reg = <0>;
                        reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-               };
-               mdio {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       switch1phy0: switch1phy0@0 {
-                               reg = <0>;
-                               interrupt-parent = <&switch0>;
-                               interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+                       mdio {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               switch1phy0: switch1phy0@0 {
+                                       reg = <0>;
+                                       interrupt-parent = <&switch0>;
+                                       interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+                               };
                        };
                };
        };
@@ -74,23 +75,24 @@ Example:
                        compatible = "marvell,mv88e6390";
                        reg = <0>;
                        reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-               };
-               mdio {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       switch1phy0: switch1phy0@0 {
-                               reg = <0>;
-                               interrupt-parent = <&switch0>;
-                               interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+                       mdio {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               switch1phy0: switch1phy0@0 {
+                                       reg = <0>;
+                                       interrupt-parent = <&switch0>;
+                                       interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+                               };
                        };
-               };
 
-               mdio1 {
-                       compatible = "marvell,mv88e6xxx-mdio-external";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       switch1phy9: switch1phy0@9 {
-                               reg = <9>;
+                       mdio1 {
+                               compatible = "marvell,mv88e6xxx-mdio-external";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               switch1phy9: switch1phy0@9 {
+                                       reg = <9>;
+                               };
                        };
                };
        };