ARM: dts: Add am335x-bonegreen

SeeedStudio BeagleBone Green (BBG) is clone of the BeagleBone Black (BBB) minus
the HDMI port and addition of two Grove connectors (i2c2 and usart2).

This board can be identified by the 1A value after A335BNLT (BBB) in the at24 eeprom:
1A: [aa 55 33 ee 41 33 33 35  42 4e 4c 54 1a 00 00 00 |.U3.A335BNLT....|]

http://beagleboard.org/green
http://www.seeedstudio.com/wiki/Beaglebone_green

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
CC: Tony Lindgren <tony@atomide.com>
CC: Jason Kridner <jkridner@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 233159d2eaab3eac34d47c4d4a9308b0d1bdec60..e45d771456f34558237b1ec26345121ecc91aeb9 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -446,6 +446,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
        am335x-base0033.dtb \
        am335x-bone.dtb \
        am335x-boneblack.dtb \
+       am335x-bonegreen.dtb \
        am335x-sl50.dtb \
        am335x-evm.dtb \
        am335x-evmsk.dtb \

diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts
new file mode 100644 (file)
index 0000000..0f65bda
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bonegreen.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+
+/ {
+       model = "TI AM335x BeagleBone Green";
+       compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
+&ldo3_reg {
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <1800000>;
+       regulator-always-on;
+};
+
+&mmc1 {
+       vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+       vmmc-supply = <&vmmcsd_fixed>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&emmc_pins>;
+       bus-width = <8>;
+       status = "okay";
+};
+
+&am33xx_pinmux {
+       uart2_pins: uart2_pins {
+               pinctrl-single,pins = <
+                       0x150 (PIN_INPUT | MUX_MODE1)   /* spi0_sclk.uart2_rxd */
+                       0x154 (PIN_OUTPUT | MUX_MODE1)  /* spi0_d0.uart2_txd */
+               >;
+       };
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins>;
+       status = "okay";
+};
+
+&rtc {
+       system-power-controller;
+};