arm64: dts: qcom: sc7280: Add QSPI node

Add QSPI DT node and qspi_opp_table for SC7280 SoC.

Move qspi_opp_table to / because SPI nodes assume
any child node is a spi device and so we can't put the
table underneath the spi controller.

Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Signed-off-by: Rajesh Patil <rajpat@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1632399378-12229-3-git-send-email-rajpat@codeaurora.org

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 8051a2639268939506609b970b75a0aa39c29f91..bec3468760eb92b596a9101f33d02369306f7506 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -454,6 +454,25 @@
                method = "smc";
        };
 
+       qspi_opp_table: qspi-opp-table {
+               compatible = "operating-points-v2";
+
+               opp-75000000 {
+                       opp-hz = /bits/ 64 <75000000>;
+                       required-opps = <&rpmhpd_opp_low_svs>;
+               };
+
+               opp-150000000 {
+                       opp-hz = /bits/ 64 <150000000>;
+                       required-opps = <&rpmhpd_opp_svs>;
+               };
+
+               opp-300000000 {
+                       opp-hz = /bits/ 64 <300000000>;
+                       required-opps = <&rpmhpd_opp_nom>;
+               };
+       };
+
        soc: soc@0 {
                #address-cells = <2>;
                #size-cells = <2>;
@@ -1469,6 +1488,23 @@
                        };
                };
 
+               qspi: spi@88dc000 {
+                       compatible = "qcom,sc7280-qspi", "qcom,qspi-v1";
+                       reg = <0 0x088dc000 0 0x1000>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+                                <&gcc GCC_QSPI_CORE_CLK>;
+                       clock-names = "iface", "core";
+                       interconnects = <&gem_noc MASTER_APPSS_PROC 0
+                                       &cnoc2 SLAVE_QSPI_0 0>;
+                       interconnect-names = "qspi-config";
+                       power-domains = <&rpmhpd SC7280_CX>;
+                       operating-points-v2 = <&qspi_opp_table>;
+                       status = "disabled";
+               };
+
                dc_noc: interconnect@90e0000 {
                        reg = <0 0x090e0000 0 0x5080>;
                        compatible = "qcom,sc7280-dc-noc";
@@ -1664,6 +1700,31 @@
                        gpio-ranges = <&tlmm 0 0 175>;
                        wakeup-parent = <&pdc>;
 
+                       qspi_clk: qspi-clk {
+                               pins = "gpio14";
+                               function = "qspi_clk";
+                       };
+
+                       qspi_cs0: qspi-cs0 {
+                               pins = "gpio15";
+                               function = "qspi_cs";
+                       };
+
+                       qspi_cs1: qspi-cs1 {
+                               pins = "gpio19";
+                               function = "qspi_cs";
+                       };
+
+                       qspi_data01: qspi-data01 {
+                               pins = "gpio12", "gpio13";
+                               function = "qspi_data";
+                       };
+
+                       qspi_data12: qspi-data12 {
+                               pins = "gpio16", "gpio17";
+                               function = "qspi_data";
+                       };
+
                        qup_uart5_default: qup-uart5-default {
                                pins = "gpio46", "gpio47";
                                function = "qup13";