usb: phy: phy-generic: Fix reset behaviour on legacy boot

The gpio-desc migration done in v4.0 caused a regression
with legacy boots due to reversed reset logic.
e.g. omap3-beagle USB host breaks on legacy boot.

Request the reset GPIO with GPIOF_ACTIVE_LOW flag so that
it matches the driver logic and pin behaviour.

Fixes: e9f2cefb0cdc ("usb: phy: generic: migrate to gpio_desc")
Cc: <stable@vger.kernel.org> # 4.0+
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index ec6ecd03269cc90a3aa113e8070cfba14c8aa6c3..5320cb8642cb5fb8edec2147da2d72c8da619167 100644 (file)
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -232,7 +232,8 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
                clk_rate = pdata->clk_rate;
                needs_vcc = pdata->needs_vcc;
                if (gpio_is_valid(pdata->gpio_reset)) {
-                       err = devm_gpio_request_one(dev, pdata->gpio_reset, 0,
+                       err = devm_gpio_request_one(dev, pdata->gpio_reset,
+                                                   GPIOF_ACTIVE_LOW,
                                                    dev_name(dev));
                        if (!err)
                                nop->gpiod_reset =