iio: st_sensors: decouple irq1 configuration parameters from the irq2 ones

Separate data-ready configuration parameters for INT1 and INT2 pins in
st_sensor_data_ready_irq data structure. That change will be use to
properly support LIS2DW12 accel sensor.

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 140ba26f61316f10c28b879408bf204131ff4783..a6eac959dfe85228510662be71f92e67fbf233c4 100644 (file)
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -159,9 +159,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
                        .mask = 0x80,
                },
                .drdy_irq = {
-                       .addr = 0x22,
-                       .mask_int1 = 0x10,
-                       .mask_int2 = 0x00,
+                       .int1 = {
+                               .addr = 0x22,
+                               .mask = 0x10,
+                       },
                        .addr_ihl = 0x25,
                        .mask_ihl = 0x02,
                        .stat_drdy = {
@@ -232,9 +233,14 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
                        .mask = 0x80,
                },
                .drdy_irq = {
-                       .addr = 0x22,
-                       .mask_int1 = 0x02,
-                       .mask_int2 = 0x10,
+                       .int1 = {
+                               .addr = 0x22,
+                               .mask = 0x02,
+                       },
+                       .int2 = {
+                               .addr = 0x22,
+                               .mask = 0x10,
+                       },
                        .addr_ihl = 0x22,
                        .mask_ihl = 0x80,
                        .addr_od = 0x22,
@@ -319,9 +325,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
                        .mask = 0x08,
                },
                .drdy_irq = {
-                       .addr = 0x23,
-                       .mask_int1 = 0x80,
-                       .mask_int2 = 0x00,
+                       .int1 = {
+                               .addr = 0x23,
+                               .mask = 0x80,
+                       },
                        .addr_ihl = 0x23,
                        .mask_ihl = 0x40,
                        .stat_drdy = {
@@ -396,8 +403,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
                        .mask = 0x01,
                },
                .drdy_irq = {
-                       .addr = 0x21,
-                       .mask_int1 = 0x04,
+                       .int1 = {
+                               .addr = 0x21,
+                               .mask = 0x04,
+                       },
                        .stat_drdy = {
                                .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
                                .mask = 0x07,
@@ -456,9 +465,14 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
                        },
                },
                .drdy_irq = {
-                       .addr = 0x22,
-                       .mask_int1 = 0x04,
-                       .mask_int2 = 0x20,
+                       .int1 = {
+                               .addr = 0x22,
+                               .mask = 0x04,
+                       },
+                       .int2 = {
+                               .addr = 0x22,
+                               .mask = 0x20,
+                       },
                        .addr_ihl = 0x22,
                        .mask_ihl = 0x80,
                        .addr_od = 0x22,
@@ -528,9 +542,14 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
                        .mask = 0x80,
                },
                .drdy_irq = {
-                       .addr = 0x22,
-                       .mask_int1 = 0x02,
-                       .mask_int2 = 0x10,
+                       .int1 = {
+                               .addr = 0x22,
+                               .mask = 0x02,
+                       },
+                       .int2 = {
+                               .addr = 0x22,
+                               .mask = 0x10,
+                       },
                        .addr_ihl = 0x22,
                        .mask_ihl = 0x80,
                },
@@ -582,8 +601,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
                .bdu = {
                },
                .drdy_irq = {
-                       .addr = 0x21,
-                       .mask_int1 = 0x04,
+                       .int1 = {
+                               .addr = 0x21,
+                               .mask = 0x04,
+                       },
                        .stat_drdy = {
                                .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
                                .mask = 0x07,
@@ -653,9 +674,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
                        },
                },
                .drdy_irq = {
-                       .addr = 0x22,
-                       .mask_int1 = 0x10,
-                       .mask_int2 = 0x00,
+                       .int1 = {
+                               .addr = 0x22,
+                               .mask = 0x10,
+                       },
                        .addr_ihl = 0x25,
                        .mask_ihl = 0x02,
                        .stat_drdy = {

diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 34115f05d5c46450d82f00fdf9cebecbbdeebd78..af702fa8fa84e07b752d38551064ffc1cd8fa416 100644 (file)
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -283,7 +283,8 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
        struct st_sensor_data *sdata = iio_priv(indio_dev);
 
        /* Sensor does not support interrupts */
-       if (sdata->sensor_settings->drdy_irq.addr == 0) {
+       if (!sdata->sensor_settings->drdy_irq.int1.addr &&
+           !sdata->sensor_settings->drdy_irq.int2.addr) {
                if (pdata->drdy_int_pin)
                        dev_info(&indio_dev->dev,
                                 "DRDY on pin INT%d specified, but sensor "
@@ -294,7 +295,7 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
 
        switch (pdata->drdy_int_pin) {
        case 1:
-               if (sdata->sensor_settings->drdy_irq.mask_int1 == 0) {
+               if (!sdata->sensor_settings->drdy_irq.int1.mask) {
                        dev_err(&indio_dev->dev,
                                        "DRDY on INT1 not available.\n");
                        return -EINVAL;
@@ -302,7 +303,7 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
                sdata->drdy_int_pin = 1;
                break;
        case 2:
-               if (sdata->sensor_settings->drdy_irq.mask_int2 == 0) {
+               if (!sdata->sensor_settings->drdy_irq.int2.mask) {
                        dev_err(&indio_dev->dev,
                                        "DRDY on INT2 not available.\n");
                        return -EINVAL;
@@ -460,10 +461,11 @@ EXPORT_SYMBOL(st_sensors_init_sensor);
 int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
 {
        int err;
-       u8 drdy_mask;
+       u8 drdy_addr, drdy_mask;
        struct st_sensor_data *sdata = iio_priv(indio_dev);
 
-       if (!sdata->sensor_settings->drdy_irq.addr) {
+       if (!sdata->sensor_settings->drdy_irq.int1.addr &&
+           !sdata->sensor_settings->drdy_irq.int2.addr) {
                /*
                 * there are some devices (e.g. LIS3MDL) where drdy line is
                 * routed to a given pin and it is not possible to select a
@@ -485,18 +487,20 @@ int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
                        goto st_accel_set_dataready_irq_error;
        }
 
-       if (sdata->drdy_int_pin == 1)
-               drdy_mask = sdata->sensor_settings->drdy_irq.mask_int1;
-       else
-               drdy_mask = sdata->sensor_settings->drdy_irq.mask_int2;
+       if (sdata->drdy_int_pin == 1) {
+               drdy_addr = sdata->sensor_settings->drdy_irq.int1.addr;
+               drdy_mask = sdata->sensor_settings->drdy_irq.int1.mask;
+       } else {
+               drdy_addr = sdata->sensor_settings->drdy_irq.int2.addr;
+               drdy_mask = sdata->sensor_settings->drdy_irq.int2.mask;
+       }
 
        /* Flag to the poll function that the hardware trigger is in use */
        sdata->hw_irq_trigger = enable;
 
        /* Enable/Disable the interrupt generator for data ready. */
-       err = st_sensors_write_data_with_mask(indio_dev,
-                                       sdata->sensor_settings->drdy_irq.addr,
-                                       drdy_mask, (int)enable);
+       err = st_sensors_write_data_with_mask(indio_dev, drdy_addr,
+                                             drdy_mask, (int)enable);
 
 st_accel_set_dataready_irq_error:
        return err;

diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index 22c0c1732996be0d9364d04c5458ad486ad24a0a..46991f7131d1cdb250397ed4841f2c33d5ff3755 100644 (file)
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -111,8 +111,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
                        .mask = 0x80,
                },
                .drdy_irq = {
-                       .addr = 0x22,
-                       .mask_int2 = 0x08,
+                       .int2 = {
+                               .addr = 0x22,
+                               .mask = 0x08,
+                       },
                        /*
                         * The sensor has IHL (active low) and open
                         * drain settings, but only for INT1 and not
@@ -184,8 +186,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
                        .mask = 0x80,
                },
                .drdy_irq = {
-                       .addr = 0x22,
-                       .mask_int2 = 0x08,
+                       .int2 = {
+                               .addr = 0x22,
+                               .mask = 0x08,
+                       },
                        /*
                         * The sensor has IHL (active low) and open
                         * drain settings, but only for INT1 and not
@@ -252,8 +256,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
                        .mask = 0x80,
                },
                .drdy_irq = {
-                       .addr = 0x22,
-                       .mask_int2 = 0x08,
+                       .int2 = {
+                               .addr = 0x22,
+                               .mask = 0x08,
+                       },
                        /*
                         * The sensor has IHL (active low) and open
                         * drain settings, but only for INT1 and not

diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index ace72c57f53ce5b15b62dd9ed7db5f6907281434..8745686f233cb891536830b49d63389de30726b4 100644 (file)
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -362,8 +362,10 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
                        .mask = 0x10,
                },
                .drdy_irq = {
-                       .addr = 0x62,
-                       .mask_int1 = 0x01,
+                       .int1 = {
+                               .addr = 0x62,
+                               .mask = 0x01,
+                       },
                        .stat_drdy = {
                                .addr = 0x67,
                                .mask = 0x07,

diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 5f8358e23f5b9494c9fd5c219b365a9cc345bc34..b8890e37a2d23f29b1f7a16ecd7f3940e1145e30 100644 (file)
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -280,9 +280,14 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
                        .mask = 0x04,
                },
                .drdy_irq = {
-                       .addr = 0x22,
-                       .mask_int1 = 0x04,
-                       .mask_int2 = 0x20,
+                       .int1 = {
+                               .addr = 0x22,
+                               .mask = 0x04,
+                       },
+                       .int2 = {
+                               .addr = 0x22,
+                               .mask = 0x20,
+                       },
                        .addr_ihl = 0x22,
                        .mask_ihl = 0x80,
                        .addr_od = 0x22,
@@ -338,9 +343,6 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
                        .addr = 0x20,
                        .mask = 0x04,
                },
-               .drdy_irq = {
-                       .addr = 0,
-               },
                .multi_read_bit = true,
                .bootime = 2,
        },
@@ -391,9 +393,10 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
                        .mask = 0x04,
                },
                .drdy_irq = {
-                       .addr = 0x23,
-                       .mask_int1 = 0x01,
-                       .mask_int2 = 0x00,
+                       .int1 = {
+                               .addr = 0x23,
+                               .mask = 0x01,
+                       },
                        .addr_ihl = 0x22,
                        .mask_ihl = 0x80,
                        .addr_od = 0x22,
@@ -455,9 +458,10 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
                        .mask = 0x02,
                },
                .drdy_irq = {
-                       .addr = 0x12,
-                       .mask_int1 = 0x04,
-                       .mask_int2 = 0x00,
+                       .int1 = {
+                               .addr = 0x12,
+                               .mask = 0x04,
+                       },
                        .addr_ihl = 0x12,
                        .mask_ihl = 0x80,
                        .addr_od = 0x12,
@@ -614,7 +618,8 @@ int st_press_common_probe(struct iio_dev *indio_dev)
        press_data->odr = press_data->sensor_settings->odr.odr_avl[0].hz;
 
        /* Some devices don't support a data ready pin. */
-       if (!pdata && press_data->sensor_settings->drdy_irq.addr)
+       if (!pdata && (press_data->sensor_settings->drdy_irq.int1.addr ||
+                      press_data->sensor_settings->drdy_irq.int2.addr))
                pdata = (struct st_sensors_platform_data *)&default_press_pdata;
 
        err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data);

diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
index ce0ef1c0a30ab40cb38687905bf5af3643690f62..e6c646d5d6d48c3620a0c14ab551e3d027bad9ce 100644 (file)
--- a/include/linux/iio/common/st_sensors.h
+++ b/include/linux/iio/common/st_sensors.h
@@ -132,9 +132,8 @@ struct st_sensor_das {
 
 /**
  * struct st_sensor_data_ready_irq - ST sensor device data-ready interrupt
- * @addr: address of the register.
- * @mask_int1: mask to enable/disable IRQ on INT1 pin.
- * @mask_int2: mask to enable/disable IRQ on INT2 pin.
+ * struct int1 - data-ready configuration register for INT1 pin.
+ * struct int2 - data-ready configuration register for INT2 pin.
  * @addr_ihl: address to enable/disable active low on the INT lines.
  * @mask_ihl: mask to enable/disable active low on the INT lines.
  * @addr_od: address to enable/disable Open Drain on the INT lines.
@@ -145,9 +144,14 @@ struct st_sensor_das {
  * @en_mask: mask to write the on/off value for enable.
  */
 struct st_sensor_data_ready_irq {
-       u8 addr;
-       u8 mask_int1;
-       u8 mask_int2;
+       struct {
+               u8 addr;
+               u8 mask;
+       } int1;
+       struct {
+               u8 addr;
+               u8 mask;
+       } int2;
        u8 addr_ihl;
        u8 mask_ihl;
        u8 addr_od;