dt-bindings: net: micrel: add coma-mode-gpios property

The LAN8814 has a coma mode pin which is used to put the PHY into
isolate and power-down mode. Usually strapped to be asserted by default.
A GPIO is then used to take the PHY out of this mode.

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/Documentation/devicetree/bindings/net/micrel.txt b/Documentation/devicetree/bindings/net/micrel.txt
index 8d157f0295a502fd326eab4e2196f17654d8b484..a9ed691ffb03453d53ac14cdf4a3c3dde68a1c2e 100644 (file)
--- a/Documentation/devicetree/bindings/net/micrel.txt
+++ b/Documentation/devicetree/bindings/net/micrel.txt
@@ -45,3 +45,12 @@ Optional properties:
 
        In fiber mode, auto-negotiation is disabled and the PHY can only work in
        100base-fx (full and half duplex) modes.
+
+ - coma-mode-gpios: If present the given gpio will be deasserted when the
+                   PHY is probed.
+
+       Some PHYs have a COMA mode input pin which puts the PHY into
+       isolate and power-down mode. On some boards this input is connected
+       to a GPIO of the SoC.
+
+       Supported on the LAN8814.