# SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb
 dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb
 dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb
 
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/G2[MN] HiHope sub board common parts
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/ {
+       aliases {
+               ethernet0 = &avb;
+       };
+
+       chosen {
+               bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+       };
+};
+
+&avb {
+       pinctrl-0 = <&avb_pins>;
+       pinctrl-names = "default";
+       phy-handle = <&phy0>;
+       phy-mode = "rgmii-txid";
+       status = "okay";
+
+       phy0: ethernet-phy@0 {
+               rxc-skew-ps = <1500>;
+               reg = <0>;
+               interrupt-parent = <&gpio2>;
+               interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+               reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+       };
+};
+
+&pfc {
+       pinctrl-0 = <&scif_clk_pins>;
+       pinctrl-names = "default";
+
+       avb_pins: avb {
+               mux {
+                       groups = "avb_link", "avb_mdio", "avb_mii";
+                       function = "avb";
+               };
+
+               pins_mdio {
+                       groups = "avb_mdio";
+                       drive-strength = <24>;
+               };
+
+               pins_mii_tx {
+                       pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+                              "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+                       drive-strength = <12>;
+               };
+       };
+};
 
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M sub board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+       model = "HopeRun HiHope RZ/G2M with sub board";
+       compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m",
+                    "renesas,r8a774a1";
+};