]> www.infradead.org Git - users/jedix/linux-maple.git/commitdiff
arm64: dts: mediatek: mt8390-genio-700-evk: Move common parts to dtsi
authorLouis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Thu, 6 Feb 2025 10:38:10 +0000 (11:38 +0100)
committerAngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Wed, 12 Feb 2025 11:31:46 +0000 (12:31 +0100)
In preparation for introducing the Genio 510 EVK board support, split
mt8390-genio-700-evk.dts file in two to create mt8390-genio-common.dtsi
file, containing common definitions for both boards.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://lore.kernel.org/r/20250206-dts_mt8370-genio-510-v3-3-5ca5c3257a4c@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi [new file with mode: 0644]

index 04e4a2f73799d04d50476eb1664b1afdbc66c124..612336713a64ee0681f6ebead04ba4ea293d1a53 100644 (file)
 /dts-v1/;
 
 #include "mt8188.dtsi"
-#include "mt6359.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
-#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
-#include <dt-bindings/spmi/spmi.h>
-#include <dt-bindings/usb/pd.h>
+#include "mt8390-genio-common.dtsi"
 
 / {
        model = "MediaTek Genio-700 EVK";
        compatible = "mediatek,mt8390-evk", "mediatek,mt8390",
                     "mediatek,mt8188";
 
-       aliases {
-               ethernet0 = &eth;
-               i2c0 = &i2c0;
-               i2c1 = &i2c1;
-               i2c2 = &i2c2;
-               i2c3 = &i2c3;
-               i2c4 = &i2c4;
-               i2c5 = &i2c5;
-               i2c6 = &i2c6;
-               mmc0 = &mmc0;
-               mmc1 = &mmc1;
-               serial0 = &uart0;
-       };
-
-       chosen {
-               stdout-path = "serial0:921600n8";
-       };
-
-       firmware {
-               optee {
-                       compatible = "linaro,optee-tz";
-                       method = "smc";
-               };
-       };
-
        memory@40000000 {
                device_type = "memory";
                reg = <0 0x40000000 0x2 0x00000000>;
        };
-
-       reserved-memory {
-               #address-cells = <2>;
-               #size-cells = <2>;
-               ranges;
-
-               /*
-                * 12 MiB reserved for OP-TEE (BL32)
-                * +-----------------------+ 0x43e0_0000
-                * |      SHMEM 2MiB       |
-                * +-----------------------+ 0x43c0_0000
-                * |        | TA_RAM  8MiB |
-                * + TZDRAM +--------------+ 0x4340_0000
-                * |        | TEE_RAM 2MiB |
-                * +-----------------------+ 0x4320_0000
-                */
-               optee_reserved: optee@43200000 {
-                       no-map;
-                       reg = <0 0x43200000 0 0x00c00000>;
-               };
-
-               scp_mem: memory@50000000 {
-                       compatible = "shared-dma-pool";
-                       reg = <0 0x50000000 0 0x2900000>;
-                       no-map;
-               };
-
-               /* 2 MiB reserved for ARM Trusted Firmware (BL31) */
-               bl31_secmon_reserved: memory@54600000 {
-                       no-map;
-                       reg = <0 0x54600000 0x0 0x200000>;
-               };
-
-               apu_mem: memory@55000000 {
-                       compatible = "shared-dma-pool";
-                       reg = <0 0x55000000 0 0x1400000>; /* 20 MB */
-               };
-
-               vpu_mem: memory@57000000 {
-                       compatible = "shared-dma-pool";
-                       reg = <0 0x57000000 0 0x1400000>; /* 20 MB */
-               };
-
-               adsp_mem: memory@60000000 {
-                       compatible = "shared-dma-pool";
-                       reg = <0 0x60000000 0 0xf00000>;
-                       no-map;
-               };
-
-               afe_dma_mem: memory@60f00000 {
-                       compatible = "shared-dma-pool";
-                       reg = <0 0x60f00000 0 0x100000>;
-                       no-map;
-               };
-
-               adsp_dma_mem: memory@61000000 {
-                       compatible = "shared-dma-pool";
-                       reg = <0 0x61000000 0 0x100000>;
-                       no-map;
-               };
-       };
-
-       common_fixed_5v: regulator-0 {
-               compatible = "regulator-fixed";
-               regulator-name = "vdd_5v";
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-               gpio = <&pio 10 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-               regulator-always-on;
-               vin-supply = <&reg_vsys>;
-       };
-
-       edp_panel_fixed_3v3: regulator-1 {
-               compatible = "regulator-fixed";
-               regulator-name = "vedp_3v3";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               enable-active-high;
-               gpio = <&pio 15 GPIO_ACTIVE_HIGH>;
-               pinctrl-names = "default";
-               pinctrl-0 = <&edp_panel_3v3_en_pins>;
-               vin-supply = <&reg_vsys>;
-       };
-
-       gpio_fixed_3v3: regulator-2 {
-               compatible = "regulator-fixed";
-               regulator-name = "ext_3v3";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               gpio = <&pio 9 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-               regulator-always-on;
-               vin-supply = <&reg_vsys>;
-       };
-
-       /* system wide 4.2V power rail from charger */
-       reg_vsys: regulator-vsys {
-               compatible = "regulator-fixed";
-               regulator-name = "vsys";
-               regulator-always-on;
-               regulator-boot-on;
-       };
-
-       /* used by mmc2 */
-       sdio_fixed_1v8: regulator-3 {
-               compatible = "regulator-fixed";
-               regulator-name = "vio18_conn";
-               regulator-min-microvolt = <1800000>;
-               regulator-max-microvolt = <1800000>;
-               enable-active-high;
-               regulator-always-on;
-       };
-
-       /* used by mmc2 */
-       sdio_fixed_3v3: regulator-4 {
-               compatible = "regulator-fixed";
-               regulator-name = "wifi_3v3";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               gpio = <&pio 74 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-               regulator-always-on;
-               vin-supply = <&reg_vsys>;
-       };
-
-       touch0_fixed_3v3: regulator-5 {
-               compatible = "regulator-fixed";
-               regulator-name = "vio33_tp1";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               gpio = <&pio 119 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-               vin-supply = <&reg_vsys>;
-       };
-
-       usb_hub_fixed_3v3: regulator-6 {
-               compatible = "regulator-fixed";
-               regulator-name = "vhub_3v3";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               gpio = <&pio 112 GPIO_ACTIVE_HIGH>; /* HUB_3V3_EN */
-               startup-delay-us = <10000>;
-               enable-active-high;
-               vin-supply = <&reg_vsys>;
-       };
-
-       usb_p0_vbus: regulator-7 {
-               compatible = "regulator-fixed";
-               regulator-name = "vbus_p0";
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-               gpio = <&pio 84 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-               vin-supply = <&reg_vsys>;
-       };
-
-       usb_p1_vbus: regulator-8 {
-               compatible = "regulator-fixed";
-               regulator-name = "vbus_p1";
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-               gpio = <&pio 87 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-               vin-supply = <&reg_vsys>;
-       };
-
-       /* used by ssusb2 */
-       usb_p2_vbus: regulator-9 {
-               compatible = "regulator-fixed";
-               regulator-name = "wifi_3v3";
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-               enable-active-high;
-       };
-};
-
-&adsp {
-       memory-region = <&adsp_dma_mem>, <&adsp_mem>;
-       status = "okay";
-};
-
-&afe {
-       memory-region = <&afe_dma_mem>;
-       status = "okay";
-};
-
-&gpu {
-       mali-supply = <&mt6359_vproc2_buck_reg>;
-       status = "okay";
-};
-
-&i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins>;
-       clock-frequency = <400000>;
-       status = "okay";
-
-       touchscreen@5d {
-               compatible = "goodix,gt9271";
-               reg = <0x5d>;
-               interrupt-parent = <&pio>;
-               interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_RISING>;
-               irq-gpios = <&pio 6 GPIO_ACTIVE_HIGH>;
-               reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
-               AVDD28-supply = <&touch0_fixed_3v3>;
-               VDDIO-supply = <&mt6359_vio18_ldo_reg>;
-               pinctrl-names = "default";
-               pinctrl-0 = <&touch_pins>;
-       };
-};
-
-&i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins>;
-       clock-frequency = <400000>;
-       status = "okay";
-};
-
-&i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c2_pins>;
-       clock-frequency = <400000>;
-       status = "okay";
-};
-
-&i2c3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c3_pins>;
-       clock-frequency = <400000>;
-       status = "okay";
-};
-
-&i2c4 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c4_pins>;
-       clock-frequency = <1000000>;
-       status = "okay";
-};
-
-&i2c5 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c5_pins>;
-       clock-frequency = <400000>;
-       status = "okay";
-};
-
-&i2c6 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c6_pins>;
-       clock-frequency = <400000>;
-       status = "okay";
-};
-
-&mfg0 {
-       domain-supply = <&mt6359_vproc2_buck_reg>;
-};
-
-&mfg1 {
-       domain-supply = <&mt6359_vsram_others_ldo_reg>;
-};
-
-&mmc0 {
-       status = "okay";
-       pinctrl-names = "default", "state_uhs";
-       pinctrl-0 = <&mmc0_default_pins>;
-       pinctrl-1 = <&mmc0_uhs_pins>;
-       bus-width = <8>;
-       max-frequency = <200000000>;
-       cap-mmc-highspeed;
-       mmc-hs200-1_8v;
-       mmc-hs400-1_8v;
-       supports-cqe;
-       cap-mmc-hw-reset;
-       no-sdio;
-       no-sd;
-       hs400-ds-delay = <0x1481b>;
-       vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
-       vqmmc-supply = <&mt6359_vufs_ldo_reg>;
-       non-removable;
-};
-
-&mmc1 {
-       status = "okay";
-       pinctrl-names = "default", "state_uhs";
-       pinctrl-0 = <&mmc1_default_pins>;
-       pinctrl-1 = <&mmc1_uhs_pins>;
-       bus-width = <4>;
-       max-frequency = <200000000>;
-       cap-sd-highspeed;
-       sd-uhs-sdr50;
-       sd-uhs-sdr104;
-       no-mmc;
-       no-sdio;
-       cd-gpios = <&pio 2 GPIO_ACTIVE_LOW>;
-       vmmc-supply = <&mt6359_vpa_buck_reg>;
-       vqmmc-supply = <&mt6359_vsim1_ldo_reg>;
-};
-
-&mt6359_vbbck_ldo_reg {
-       regulator-always-on;
-};
-
-&mt6359_vcn18_ldo_reg {
-       regulator-name = "vcn18_pmu";
-       regulator-always-on;
-};
-
-&mt6359_vcn33_2_bt_ldo_reg {
-       regulator-name = "vcn33_2_pmu";
-       regulator-always-on;
-};
-
-&mt6359_vcore_buck_reg {
-       regulator-name = "dvdd_proc_l";
-       regulator-always-on;
-};
-
-&mt6359_vgpu11_buck_reg {
-       regulator-name = "dvdd_core";
-       regulator-always-on;
-};
-
-&mt6359_vpa_buck_reg {
-       regulator-name = "vpa_pmu";
-       regulator-max-microvolt = <3100000>;
-};
-
-&mt6359_vproc2_buck_reg {
-       /* The name "vgpu" is required by mtk-regulator-coupler */
-       regulator-name = "vgpu";
-       regulator-min-microvolt = <550000>;
-       regulator-max-microvolt = <800000>;
-       regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>;
-       regulator-coupled-max-spread = <6250>;
-};
-
-&mt6359_vpu_buck_reg {
-       regulator-name = "dvdd_adsp";
-       regulator-always-on;
-};
-
-&mt6359_vrf12_ldo_reg {
-       regulator-name = "va12_abb2_pmu";
-       regulator-always-on;
-};
-
-&mt6359_vsim1_ldo_reg {
-       regulator-name = "vsim1_pmu";
-       regulator-enable-ramp-delay = <480>;
-};
-
-&mt6359_vsram_others_ldo_reg {
-       /* The name "vsram_gpu" is required by mtk-regulator-coupler */
-       regulator-name = "vsram_gpu";
-       regulator-min-microvolt = <750000>;
-       regulator-max-microvolt = <800000>;
-       regulator-coupled-with = <&mt6359_vproc2_buck_reg>;
-       regulator-coupled-max-spread = <6250>;
-};
-
-&mt6359_vufs_ldo_reg {
-       regulator-name = "vufs18_pmu";
-       regulator-always-on;
-};
-
-&mt6359codec {
-       mediatek,mic-type-0 = <1>; /* ACC */
-       mediatek,mic-type-1 = <3>; /* DCC */
-};
-
-&pcie {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pcie_pins_default>;
-       status = "okay";
-};
-
-&pciephy {
-       status = "okay";
-};
-
-&pio {
-       audio_default_pins: audio-default-pins {
-               pins-cmd-dat {
-                       pinmux = <PINMUX_GPIO101__FUNC_O_AUD_CLK_MOSI>,
-                                <PINMUX_GPIO102__FUNC_O_AUD_SYNC_MOSI>,
-                                <PINMUX_GPIO103__FUNC_O_AUD_DAT_MOSI0>,
-                                <PINMUX_GPIO104__FUNC_O_AUD_DAT_MOSI1>,
-                                <PINMUX_GPIO105__FUNC_I0_AUD_DAT_MISO0>,
-                                <PINMUX_GPIO106__FUNC_I0_AUD_DAT_MISO1>,
-                                <PINMUX_GPIO107__FUNC_B0_I2SIN_MCK>,
-                                <PINMUX_GPIO108__FUNC_B0_I2SIN_BCK>,
-                                <PINMUX_GPIO109__FUNC_B0_I2SIN_WS>,
-                                <PINMUX_GPIO110__FUNC_I0_I2SIN_D0>,
-                                <PINMUX_GPIO114__FUNC_O_I2SO2_MCK>,
-                                <PINMUX_GPIO115__FUNC_B0_I2SO2_BCK>,
-                                <PINMUX_GPIO116__FUNC_B0_I2SO2_WS>,
-                                <PINMUX_GPIO117__FUNC_O_I2SO2_D0>,
-                                <PINMUX_GPIO118__FUNC_O_I2SO2_D1>,
-                                <PINMUX_GPIO121__FUNC_B0_PCM_CLK>,
-                                <PINMUX_GPIO122__FUNC_B0_PCM_SYNC>,
-                                <PINMUX_GPIO124__FUNC_I0_PCM_DI>,
-                                <PINMUX_GPIO125__FUNC_O_DMIC1_CLK>,
-                                <PINMUX_GPIO126__FUNC_I0_DMIC1_DAT>,
-                                <PINMUX_GPIO128__FUNC_O_DMIC2_CLK>,
-                                <PINMUX_GPIO129__FUNC_I0_DMIC2_DAT>;
-               };
-       };
-
-       dptx_pins: dptx-pins {
-               pins-cmd-dat {
-                       pinmux = <PINMUX_GPIO46__FUNC_I0_DP_TX_HPD>;
-                       bias-pull-up;
-               };
-       };
-
-       edp_panel_3v3_en_pins: edp-panel-3v3-en-pins {
-               pins1 {
-                       pinmux = <PINMUX_GPIO15__FUNC_B_GPIO15>;
-                       output-high;
-               };
-       };
-
-       eth_default_pins: eth-default-pins {
-               pins-cc {
-                       pinmux = <PINMUX_GPIO139__FUNC_B0_GBE_TXC>,
-                                <PINMUX_GPIO140__FUNC_I0_GBE_RXC>,
-                                <PINMUX_GPIO141__FUNC_I0_GBE_RXDV>,
-                                <PINMUX_GPIO142__FUNC_O_GBE_TXEN>;
-                       drive-strength = <8>;
-               };
-
-               pins-mdio {
-                       pinmux = <PINMUX_GPIO143__FUNC_O_GBE_MDC>,
-                                <PINMUX_GPIO144__FUNC_B1_GBE_MDIO>;
-                       drive-strength = <8>;
-                       input-enable;
-               };
-
-               pins-power {
-                       pinmux = <PINMUX_GPIO145__FUNC_B_GPIO145>,
-                                <PINMUX_GPIO146__FUNC_B_GPIO146>;
-                       output-high;
-               };
-
-               pins-rxd {
-                       pinmux = <PINMUX_GPIO135__FUNC_I0_GBE_RXD3>,
-                                <PINMUX_GPIO136__FUNC_I0_GBE_RXD2>,
-                                <PINMUX_GPIO137__FUNC_I0_GBE_RXD1>,
-                                <PINMUX_GPIO138__FUNC_I0_GBE_RXD0>;
-                       drive-strength = <8>;
-               };
-
-               pins-txd {
-                       pinmux = <PINMUX_GPIO131__FUNC_O_GBE_TXD3>,
-                                <PINMUX_GPIO132__FUNC_O_GBE_TXD2>,
-                                <PINMUX_GPIO133__FUNC_O_GBE_TXD1>,
-                                <PINMUX_GPIO134__FUNC_O_GBE_TXD0>;
-                       drive-strength = <8>;
-               };
-       };
-
-       eth_sleep_pins: eth-sleep-pins {
-               pins-cc {
-                       pinmux = <PINMUX_GPIO139__FUNC_B_GPIO139>,
-                                <PINMUX_GPIO140__FUNC_B_GPIO140>,
-                                <PINMUX_GPIO141__FUNC_B_GPIO141>,
-                                <PINMUX_GPIO142__FUNC_B_GPIO142>;
-               };
-
-               pins-mdio {
-                       pinmux = <PINMUX_GPIO143__FUNC_B_GPIO143>,
-                                <PINMUX_GPIO144__FUNC_B_GPIO144>;
-                       input-disable;
-                       bias-disable;
-               };
-
-               pins-rxd {
-                       pinmux = <PINMUX_GPIO135__FUNC_B_GPIO135>,
-                                <PINMUX_GPIO136__FUNC_B_GPIO136>,
-                                <PINMUX_GPIO137__FUNC_B_GPIO137>,
-                                <PINMUX_GPIO138__FUNC_B_GPIO138>;
-               };
-
-               pins-txd {
-                       pinmux = <PINMUX_GPIO131__FUNC_B_GPIO131>,
-                                <PINMUX_GPIO132__FUNC_B_GPIO132>,
-                                <PINMUX_GPIO133__FUNC_B_GPIO133>,
-                                <PINMUX_GPIO134__FUNC_B_GPIO134>;
-               };
-       };
-
-       i2c0_pins: i2c0-pins {
-               pins {
-                       pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
-                                <PINMUX_GPIO55__FUNC_B1_SCL0>;
-                       bias-pull-up = <MTK_PULL_SET_RSEL_011>;
-                       drive-strength-microamp = <1000>;
-               };
-       };
-
-       i2c1_pins: i2c1-pins {
-               pins {
-                       pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
-                                <PINMUX_GPIO57__FUNC_B1_SCL1>;
-                       bias-pull-up = <MTK_PULL_SET_RSEL_011>;
-                       drive-strength-microamp = <1000>;
-               };
-       };
-
-       i2c2_pins: i2c2-pins {
-               pins {
-                       pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
-                                <PINMUX_GPIO59__FUNC_B1_SCL2>;
-                       bias-pull-up = <MTK_PULL_SET_RSEL_011>;
-                       drive-strength-microamp = <1000>;
-               };
-       };
-
-       i2c3_pins: i2c3-pins {
-               pins {
-                       pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
-                                <PINMUX_GPIO61__FUNC_B1_SCL3>;
-                       bias-pull-up = <MTK_PULL_SET_RSEL_011>;
-                       drive-strength-microamp = <1000>;
-               };
-       };
-
-       i2c4_pins: i2c4-pins {
-               pins {
-                       pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
-                                <PINMUX_GPIO63__FUNC_B1_SCL4>;
-                       bias-pull-up = <MTK_PULL_SET_RSEL_011>;
-                       drive-strength-microamp = <1000>;
-               };
-       };
-
-       i2c5_pins: i2c5-pins {
-               pins {
-                       pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
-                                <PINMUX_GPIO65__FUNC_B1_SCL5>;
-                       bias-pull-up = <MTK_PULL_SET_RSEL_011>;
-                       drive-strength-microamp = <1000>;
-               };
-       };
-
-       i2c6_pins: i2c6-pins {
-               pins {
-                       pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
-                                <PINMUX_GPIO67__FUNC_B1_SCL6>;
-                       bias-pull-up = <MTK_PULL_SET_RSEL_011>;
-                       drive-strength-microamp = <1000>;
-               };
-       };
-
-       gpio_key_pins: gpio-key-pins {
-               pins {
-                       pinmux = <PINMUX_GPIO42__FUNC_B1_KPCOL0>,
-                                <PINMUX_GPIO43__FUNC_B1_KPCOL1>,
-                                <PINMUX_GPIO44__FUNC_B1_KPROW0>;
-               };
-       };
-
-       mmc0_default_pins: mmc0-default-pins {
-               pins-clk {
-                       pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
-                       drive-strength = <6>;
-                       bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-               };
-
-               pins-cmd-dat {
-                       pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
-                                <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
-                                <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
-                                <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
-                                <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
-                                <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
-                                <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
-                                <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
-                                <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
-                       input-enable;
-                       drive-strength = <6>;
-                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-               };
-
-               pins-rst {
-                       pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
-                       drive-strength = <6>;
-                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-               };
-       };
-
-       mmc0_uhs_pins: mmc0-uhs-pins {
-               pins-clk {
-                       pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
-                       drive-strength = <8>;
-                       bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-               };
-
-               pins-cmd-dat {
-                       pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
-                                <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
-                                <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
-                                <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
-                                <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
-                                <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
-                                <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
-                                <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
-                                <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
-                       input-enable;
-                       drive-strength = <8>;
-                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-               };
-
-               pins-ds {
-                       pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
-                       drive-strength = <8>;
-                       bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-               };
-
-               pins-rst {
-                       pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
-                       drive-strength = <8>;
-                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-               };
-       };
-
-       mmc1_default_pins: mmc1-default-pins {
-               pins-clk {
-                       pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
-                       drive-strength = <6>;
-                       bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-               };
-
-               pins-cmd-dat {
-                       pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>,
-                                <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>,
-                                <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>,
-                                <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
-                                <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
-                       input-enable;
-                       drive-strength = <6>;
-                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-               };
-
-               pins-insert {
-                       pinmux = <PINMUX_GPIO2__FUNC_B_GPIO2>;
-                       bias-pull-up;
-               };
-       };
-
-       mmc1_uhs_pins: mmc1-uhs-pins {
-               pins-clk {
-                       pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
-                       drive-strength = <6>;
-                       bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-               };
-
-               pins-cmd-dat {
-                       pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>,
-                                <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>,
-                                <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>,
-                                <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
-                                <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
-                       input-enable;
-                       drive-strength = <6>;
-                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-               };
-       };
-
-       mmc2_default_pins: mmc2-default-pins {
-               pins-clk {
-                       pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
-                       drive-strength = <4>;
-                       bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-               };
-
-               pins-cmd-dat {
-                       pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>,
-                                <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>,
-                                <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>,
-                                <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
-                                <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
-                       input-enable;
-                       drive-strength = <6>;
-                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-               };
-
-               pins-pcm {
-                       pinmux = <PINMUX_GPIO123__FUNC_O_PCM_DO>;
-               };
-       };
-
-       mmc2_uhs_pins: mmc2-uhs-pins {
-               pins-clk {
-                       pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
-                       drive-strength = <4>;
-                       bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-               };
-
-               pins-cmd-dat {
-                       pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>,
-                                <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>,
-                                <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>,
-                                <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
-                                <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
-                       input-enable;
-                       drive-strength = <6>;
-                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-               };
-       };
-
-       mmc2_eint_pins: mmc2-eint-pins {
-               pins-dat1 {
-                       pinmux = <PINMUX_GPIO172__FUNC_B_GPIO172>;
-                       input-enable;
-                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-               };
-       };
-
-       mmc2_dat1_pins: mmc2-dat1-pins {
-               pins-dat1 {
-                       pinmux = <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>;
-                       input-enable;
-                       drive-strength = <6>;
-                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-               };
-       };
-
-       panel_default_pins: panel-default-pins {
-               pins-dcdc {
-                       pinmux = <PINMUX_GPIO45__FUNC_B_GPIO45>;
-                       output-low;
-               };
-
-               pins-en {
-                       pinmux = <PINMUX_GPIO111__FUNC_B_GPIO111>;
-                       output-low;
-               };
-
-               pins-rst {
-                       pinmux = <PINMUX_GPIO25__FUNC_B_GPIO25>;
-                       output-high;
-               };
-       };
-
-       pcie_pins_default: pcie-default {
-               mux {
-                       pinmux = <PINMUX_GPIO47__FUNC_I1_WAKEN>,
-                                <PINMUX_GPIO48__FUNC_O_PERSTN>,
-                                <PINMUX_GPIO49__FUNC_B1_CLKREQN>;
-                       bias-pull-up;
-               };
-       };
-
-       rt1715_int_pins: rt1715-int-pins {
-               pins_cmd0_dat {
-                       pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>;
-                       bias-pull-up;
-                       input-enable;
-               };
-       };
-
-       spi0_pins: spi0-pins {
-               pins-spi {
-                       pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
-                               <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
-                               <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
-                               <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
-                       bias-disable;
-               };
-       };
-
-       spi1_pins: spi1-pins {
-               pins-spi {
-                       pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
-                               <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
-                               <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
-                               <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
-                       bias-disable;
-               };
-       };
-
-       spi2_pins: spi2-pins {
-               pins-spi {
-                       pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
-                               <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
-                               <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
-                               <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
-                       bias-disable;
-               };
-       };
-
-       touch_pins: touch-pins {
-               pins-irq {
-                       pinmux = <PINMUX_GPIO6__FUNC_B_GPIO6>;
-                       input-enable;
-                       bias-disable;
-               };
-
-               pins-reset {
-                       pinmux = <PINMUX_GPIO5__FUNC_B_GPIO5>;
-                       output-high;
-               };
-       };
-
-       uart0_pins: uart0-pins {
-               pins {
-                       pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
-                                <PINMUX_GPIO32__FUNC_I1_URXD0>;
-                       bias-pull-up;
-               };
-       };
-
-       uart1_pins: uart1-pins {
-               pins {
-                       pinmux = <PINMUX_GPIO33__FUNC_O_UTXD1>,
-                                <PINMUX_GPIO34__FUNC_I1_URXD1>;
-                       bias-pull-up;
-               };
-       };
-
-       uart2_pins: uart2-pins {
-               pins {
-                       pinmux = <PINMUX_GPIO35__FUNC_O_UTXD2>,
-                                <PINMUX_GPIO36__FUNC_I1_URXD2>;
-                       bias-pull-up;
-               };
-       };
-
-       usb_default_pins: usb-default-pins {
-               pins-iddig {
-                       pinmux = <PINMUX_GPIO83__FUNC_B_GPIO83>;
-                       input-enable;
-                       bias-pull-up;
-               };
-
-               pins-valid {
-                       pinmux = <PINMUX_GPIO85__FUNC_I0_VBUSVALID>;
-                       input-enable;
-               };
-
-               pins-vbus {
-                       pinmux = <PINMUX_GPIO84__FUNC_O_USB_DRVVBUS>;
-                       output-high;
-               };
-
-       };
-
-       usb1_default_pins: usb1-default-pins {
-               pins-valid {
-                       pinmux = <PINMUX_GPIO88__FUNC_I0_VBUSVALID_1P>;
-                       input-enable;
-               };
-
-               pins-usb-hub-3v3-en {
-                       pinmux = <PINMUX_GPIO112__FUNC_B_GPIO112>;
-                       output-high;
-               };
-       };
-
-       wifi_pwrseq_pins: wifi-pwrseq-pins {
-               pins-wifi-enable {
-                       pinmux = <PINMUX_GPIO127__FUNC_B_GPIO127>;
-                       output-low;
-               };
-       };
-};
-
-&eth {
-       phy-mode ="rgmii-id";
-       phy-handle = <&ethernet_phy0>;
-       pinctrl-names = "default", "sleep";
-       pinctrl-0 = <&eth_default_pins>;
-       pinctrl-1 = <&eth_sleep_pins>;
-       mediatek,mac-wol;
-       snps,reset-gpio = <&pio 147 GPIO_ACTIVE_HIGH>;
-       snps,reset-delays-us = <0 10000 10000>;
-       status = "okay";
-};
-
-&eth_mdio {
-       ethernet_phy0: ethernet-phy@1 {
-               compatible = "ethernet-phy-id001c.c916";
-               reg = <0x1>;
-       };
-};
-
-&pmic {
-       interrupt-parent = <&pio>;
-       interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
-
-       mt6359keys: keys {
-               compatible = "mediatek,mt6359-keys";
-               mediatek,long-press-mode = <1>;
-               power-off-time-sec = <0>;
-
-               power-key {
-                       linux,keycodes = <KEY_POWER>;
-                       wakeup-source;
-               };
-       };
-};
-
-&scp {
-       memory-region = <&scp_mem>;
-       status = "okay";
-};
-
-&sound {
-       compatible = "mediatek,mt8390-mt6359-evk", "mediatek,mt8188-mt6359-evb";
-       model = "mt8390-evk";
-       pinctrl-names = "default";
-       pinctrl-0 = <&audio_default_pins>;
-       audio-routing =
-               "Headphone", "Headphone L",
-               "Headphone", "Headphone R";
-       mediatek,adsp = <&adsp>;
-       status = "okay";
-
-       dai-link-0 {
-               link-name = "DL_SRC_BE";
-
-               codec {
-                       sound-dai = <&pmic 0>;
-               };
-       };
-};
-
-&spi2 {
-       pinctrl-0 = <&spi2_pins>;
-       pinctrl-names = "default";
-       mediatek,pad-select = <0>;
-       #address-cells = <1>;
-       #size-cells = <0>;
-       status = "okay";
 };
 
-&uart0 {
-       pinctrl-0 = <&uart0_pins>;
-       pinctrl-names = "default";
-       status = "okay";
-};
-
-&uart1 {
-       pinctrl-0 = <&uart1_pins>;
-       pinctrl-names = "default";
-       status = "okay";
-};
-
-&uart2 {
-       pinctrl-0 = <&uart2_pins>;
-       pinctrl-names = "default";
-       status = "okay";
-};
-
-&u3phy0 {
-       status = "okay";
-};
-
-&u3phy1 {
-       status = "okay";
-};
-
-&u3phy2 {
-       status = "okay";
-};
-
-&xhci0 {
-       status = "okay";
-       vusb33-supply = <&mt6359_vusb_ldo_reg>;
-};
-
-&xhci1 {
-       status = "okay";
-       vusb33-supply = <&mt6359_vusb_ldo_reg>;
-       #address-cells = <1>;
-       #size-cells = <0>;
-
-       hub_2_0: hub@1 {
-               compatible = "usb451,8025";
-               reg = <1>;
-               peer-hub = <&hub_3_0>;
-               reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
-               vdd-supply = <&usb_hub_fixed_3v3>;
-       };
-
-       hub_3_0: hub@2 {
-               compatible = "usb451,8027";
-               reg = <2>;
-               peer-hub = <&hub_2_0>;
-               reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
-               vdd-supply = <&usb_hub_fixed_3v3>;
-       };
-};
-
-&xhci2 {
-       status = "okay";
-       vusb33-supply = <&mt6359_vusb_ldo_reg>;
-       vbus-supply = <&sdio_fixed_3v3>; /* wifi_3v3 */
-};
diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi
new file mode 100644 (file)
index 0000000..a37cf10
--- /dev/null
@@ -0,0 +1,1046 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Author: Chris Chen <chris-qj.chen@mediatek.com>
+ *         Pablo Sun <pablo.sun@mediatek.com>
+ *         Macpaul Lin <macpaul.lin@mediatek.com>
+ *
+ * Copyright (C) 2025 Collabora Ltd.
+ *                    Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ *                    AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>   
+ */
+
+#include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/usb/pd.h>
+
+/ {
+       aliases {
+               ethernet0 = &eth;
+               i2c0 = &i2c0;
+               i2c1 = &i2c1;
+               i2c2 = &i2c2;
+               i2c3 = &i2c3;
+               i2c4 = &i2c4;
+               i2c5 = &i2c5;
+               i2c6 = &i2c6;
+               mmc0 = &mmc0;
+               mmc1 = &mmc1;
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:921600n8";
+       };
+
+       firmware {
+               optee {
+                       compatible = "linaro,optee-tz";
+                       method = "smc";
+               };
+       };
+       reserved-memory {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges;
+
+               /*
+                * 12 MiB reserved for OP-TEE (BL32)
+                * +-----------------------+ 0x43e0_0000
+                * |      SHMEM 2MiB       |
+                * +-----------------------+ 0x43c0_0000
+                * |        | TA_RAM  8MiB |
+                * + TZDRAM +--------------+ 0x4340_0000
+                * |        | TEE_RAM 2MiB |
+                * +-----------------------+ 0x4320_0000
+                */
+               optee_reserved: optee@43200000 {
+                       no-map;
+                       reg = <0 0x43200000 0 0x00c00000>;
+               };
+
+               scp_mem: memory@50000000 {
+                       compatible = "shared-dma-pool";
+                       reg = <0 0x50000000 0 0x2900000>;
+                       no-map;
+               };
+
+               /* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+               bl31_secmon_reserved: memory@54600000 {
+                       no-map;
+                       reg = <0 0x54600000 0x0 0x200000>;
+               };
+
+               apu_mem: memory@55000000 {
+                       compatible = "shared-dma-pool";
+                       reg = <0 0x55000000 0 0x1400000>; /* 20 MB */
+               };
+
+               vpu_mem: memory@57000000 {
+                       compatible = "shared-dma-pool";
+                       reg = <0 0x57000000 0 0x1400000>; /* 20 MB */
+               };
+
+               adsp_mem: memory@60000000 {
+                       compatible = "shared-dma-pool";
+                       reg = <0 0x60000000 0 0xf00000>;
+                       no-map;
+               };
+
+               afe_dma_mem: memory@60f00000 {
+                       compatible = "shared-dma-pool";
+                       reg = <0 0x60f00000 0 0x100000>;
+                       no-map;
+               };
+
+               adsp_dma_mem: memory@61000000 {
+                       compatible = "shared-dma-pool";
+                       reg = <0 0x61000000 0 0x100000>;
+                       no-map;
+               };
+       };
+
+       common_fixed_5v: regulator-0 {
+               compatible = "regulator-fixed";
+               regulator-name = "vdd_5v";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               gpio = <&pio 10 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+               regulator-always-on;
+               vin-supply = <&reg_vsys>;
+       };
+
+       edp_panel_fixed_3v3: regulator-1 {
+               compatible = "regulator-fixed";
+               regulator-name = "vedp_3v3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               enable-active-high;
+               gpio = <&pio 15 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&edp_panel_3v3_en_pins>;
+               vin-supply = <&reg_vsys>;
+       };
+
+       gpio_fixed_3v3: regulator-2 {
+               compatible = "regulator-fixed";
+               regulator-name = "ext_3v3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&pio 9 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+               regulator-always-on;
+               vin-supply = <&reg_vsys>;
+       };
+
+       /* system wide 4.2V power rail from charger */
+       reg_vsys: regulator-vsys {
+               compatible = "regulator-fixed";
+               regulator-name = "vsys";
+               regulator-always-on;
+               regulator-boot-on;
+       };
+
+       /* used by mmc2 */
+       sdio_fixed_1v8: regulator-3 {
+               compatible = "regulator-fixed";
+               regulator-name = "vio18_conn";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               enable-active-high;
+               regulator-always-on;
+       };
+
+       /* used by mmc2 */
+       sdio_fixed_3v3: regulator-4 {
+               compatible = "regulator-fixed";
+               regulator-name = "wifi_3v3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&pio 74 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+               regulator-always-on;
+               vin-supply = <&reg_vsys>;
+       };
+
+       touch0_fixed_3v3: regulator-5 {
+               compatible = "regulator-fixed";
+               regulator-name = "vio33_tp1";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&pio 119 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+               vin-supply = <&reg_vsys>;
+       };
+
+       usb_hub_fixed_3v3: regulator-6 {
+               compatible = "regulator-fixed";
+               regulator-name = "vhub_3v3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&pio 112 GPIO_ACTIVE_HIGH>; /* HUB_3V3_EN */
+               startup-delay-us = <10000>;
+               enable-active-high;
+               vin-supply = <&reg_vsys>;
+       };
+
+       usb_p0_vbus: regulator-7 {
+               compatible = "regulator-fixed";
+               regulator-name = "vbus_p0";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               gpio = <&pio 84 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+               vin-supply = <&reg_vsys>;
+       };
+
+       usb_p1_vbus: regulator-8 {
+               compatible = "regulator-fixed";
+               regulator-name = "vbus_p1";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               gpio = <&pio 87 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+               vin-supply = <&reg_vsys>;
+       };
+
+       /* used by ssusb2 */
+       usb_p2_vbus: regulator-9 {
+               compatible = "regulator-fixed";
+               regulator-name = "wifi_3v3";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               enable-active-high;
+       };
+};
+
+&adsp {
+       memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+       status = "okay";
+};
+
+&afe {
+       memory-region = <&afe_dma_mem>;
+       status = "okay";
+};
+
+&gpu {
+       mali-supply = <&mt6359_vproc2_buck_reg>;
+       status = "okay";
+};
+
+&i2c0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c0_pins>;
+       clock-frequency = <400000>;
+       status = "okay";
+
+       touchscreen@5d {
+               compatible = "goodix,gt9271";
+               reg = <0x5d>;
+               interrupt-parent = <&pio>;
+               interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_RISING>;
+               irq-gpios = <&pio 6 GPIO_ACTIVE_HIGH>;
+               reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+               AVDD28-supply = <&touch0_fixed_3v3>;
+               VDDIO-supply = <&mt6359_vio18_ldo_reg>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&touch_pins>;
+       };
+};
+
+&i2c1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c1_pins>;
+       clock-frequency = <400000>;
+       status = "okay";
+};
+
+&i2c2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c2_pins>;
+       clock-frequency = <400000>;
+       status = "okay";
+};
+
+&i2c3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c3_pins>;
+       clock-frequency = <400000>;
+       status = "okay";
+};
+
+&i2c4 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c4_pins>;
+       clock-frequency = <1000000>;
+       status = "okay";
+};
+
+&i2c5 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c5_pins>;
+       clock-frequency = <400000>;
+       status = "okay";
+};
+
+&i2c6 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c6_pins>;
+       clock-frequency = <400000>;
+       status = "okay";
+};
+
+&mfg0 {
+       domain-supply = <&mt6359_vproc2_buck_reg>;
+};
+
+&mfg1 {
+       domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
+&mmc0 {
+       status = "okay";
+       pinctrl-names = "default", "state_uhs";
+       pinctrl-0 = <&mmc0_default_pins>;
+       pinctrl-1 = <&mmc0_uhs_pins>;
+       bus-width = <8>;
+       max-frequency = <200000000>;
+       cap-mmc-highspeed;
+       mmc-hs200-1_8v;
+       mmc-hs400-1_8v;
+       supports-cqe;
+       cap-mmc-hw-reset;
+       no-sdio;
+       no-sd;
+       hs400-ds-delay = <0x1481b>;
+       vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+       vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+       non-removable;
+};
+
+&mmc1 {
+       status = "okay";
+       pinctrl-names = "default", "state_uhs";
+       pinctrl-0 = <&mmc1_default_pins>;
+       pinctrl-1 = <&mmc1_uhs_pins>;
+       bus-width = <4>;
+       max-frequency = <200000000>;
+       cap-sd-highspeed;
+       sd-uhs-sdr50;
+       sd-uhs-sdr104;
+       no-mmc;
+       no-sdio;
+       cd-gpios = <&pio 2 GPIO_ACTIVE_LOW>;
+       vmmc-supply = <&mt6359_vpa_buck_reg>;
+       vqmmc-supply = <&mt6359_vsim1_ldo_reg>;
+};
+
+&mt6359_vbbck_ldo_reg {
+       regulator-always-on;
+};
+
+&mt6359_vcn18_ldo_reg {
+       regulator-name = "vcn18_pmu";
+       regulator-always-on;
+};
+
+&mt6359_vcn33_2_bt_ldo_reg {
+       regulator-name = "vcn33_2_pmu";
+       regulator-always-on;
+};
+
+&mt6359_vcore_buck_reg {
+       regulator-name = "dvdd_proc_l";
+       regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+       regulator-name = "dvdd_core";
+       regulator-always-on;
+};
+
+&mt6359_vpa_buck_reg {
+       regulator-name = "vpa_pmu";
+       regulator-max-microvolt = <3100000>;
+};
+
+&mt6359_vproc2_buck_reg {
+       /* The name "vgpu" is required by mtk-regulator-coupler */
+       regulator-name = "vgpu";
+       regulator-min-microvolt = <550000>;
+       regulator-max-microvolt = <800000>;
+       regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>;
+       regulator-coupled-max-spread = <6250>;
+};
+
+&mt6359_vpu_buck_reg {
+       regulator-name = "dvdd_adsp";
+       regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+       regulator-name = "va12_abb2_pmu";
+       regulator-always-on;
+};
+
+&mt6359_vsim1_ldo_reg {
+       regulator-name = "vsim1_pmu";
+       regulator-enable-ramp-delay = <480>;
+};
+
+&mt6359_vsram_others_ldo_reg {
+       /* The name "vsram_gpu" is required by mtk-regulator-coupler */
+       regulator-name = "vsram_gpu";
+       regulator-min-microvolt = <750000>;
+       regulator-max-microvolt = <800000>;
+       regulator-coupled-with = <&mt6359_vproc2_buck_reg>;
+       regulator-coupled-max-spread = <6250>;
+};
+
+&mt6359_vufs_ldo_reg {
+       regulator-name = "vufs18_pmu";
+       regulator-always-on;
+};
+
+&mt6359codec {
+       mediatek,mic-type-0 = <1>; /* ACC */
+       mediatek,mic-type-1 = <3>; /* DCC */
+};
+
+&pcie {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pcie_pins_default>;
+       status = "okay";
+};
+
+&pciephy {
+       status = "okay";
+};
+
+&pio {
+       audio_default_pins: audio-default-pins {
+               pins-cmd-dat {
+                       pinmux = <PINMUX_GPIO101__FUNC_O_AUD_CLK_MOSI>,
+                                <PINMUX_GPIO102__FUNC_O_AUD_SYNC_MOSI>,
+                                <PINMUX_GPIO103__FUNC_O_AUD_DAT_MOSI0>,
+                                <PINMUX_GPIO104__FUNC_O_AUD_DAT_MOSI1>,
+                                <PINMUX_GPIO105__FUNC_I0_AUD_DAT_MISO0>,
+                                <PINMUX_GPIO106__FUNC_I0_AUD_DAT_MISO1>,
+                                <PINMUX_GPIO107__FUNC_B0_I2SIN_MCK>,
+                                <PINMUX_GPIO108__FUNC_B0_I2SIN_BCK>,
+                                <PINMUX_GPIO109__FUNC_B0_I2SIN_WS>,
+                                <PINMUX_GPIO110__FUNC_I0_I2SIN_D0>,
+                                <PINMUX_GPIO114__FUNC_O_I2SO2_MCK>,
+                                <PINMUX_GPIO115__FUNC_B0_I2SO2_BCK>,
+                                <PINMUX_GPIO116__FUNC_B0_I2SO2_WS>,
+                                <PINMUX_GPIO117__FUNC_O_I2SO2_D0>,
+                                <PINMUX_GPIO118__FUNC_O_I2SO2_D1>,
+                                <PINMUX_GPIO121__FUNC_B0_PCM_CLK>,
+                                <PINMUX_GPIO122__FUNC_B0_PCM_SYNC>,
+                                <PINMUX_GPIO124__FUNC_I0_PCM_DI>,
+                                <PINMUX_GPIO125__FUNC_O_DMIC1_CLK>,
+                                <PINMUX_GPIO126__FUNC_I0_DMIC1_DAT>,
+                                <PINMUX_GPIO128__FUNC_O_DMIC2_CLK>,
+                                <PINMUX_GPIO129__FUNC_I0_DMIC2_DAT>;
+               };
+       };
+
+       dptx_pins: dptx-pins {
+               pins-cmd-dat {
+                       pinmux = <PINMUX_GPIO46__FUNC_I0_DP_TX_HPD>;
+                       bias-pull-up;
+               };
+       };
+
+       edp_panel_3v3_en_pins: edp-panel-3v3-en-pins {
+               pins1 {
+                       pinmux = <PINMUX_GPIO15__FUNC_B_GPIO15>;
+                       output-high;
+               };
+       };
+
+       eth_default_pins: eth-default-pins {
+               pins-cc {
+                       pinmux = <PINMUX_GPIO139__FUNC_B0_GBE_TXC>,
+                                <PINMUX_GPIO140__FUNC_I0_GBE_RXC>,
+                                <PINMUX_GPIO141__FUNC_I0_GBE_RXDV>,
+                                <PINMUX_GPIO142__FUNC_O_GBE_TXEN>;
+                       drive-strength = <8>;
+               };
+
+               pins-mdio {
+                       pinmux = <PINMUX_GPIO143__FUNC_O_GBE_MDC>,
+                                <PINMUX_GPIO144__FUNC_B1_GBE_MDIO>;
+                       drive-strength = <8>;
+                       input-enable;
+               };
+
+               pins-power {
+                       pinmux = <PINMUX_GPIO145__FUNC_B_GPIO145>,
+                                <PINMUX_GPIO146__FUNC_B_GPIO146>;
+                       output-high;
+               };
+
+               pins-rxd {
+                       pinmux = <PINMUX_GPIO135__FUNC_I0_GBE_RXD3>,
+                                <PINMUX_GPIO136__FUNC_I0_GBE_RXD2>,
+                                <PINMUX_GPIO137__FUNC_I0_GBE_RXD1>,
+                                <PINMUX_GPIO138__FUNC_I0_GBE_RXD0>;
+                       drive-strength = <8>;
+               };
+
+               pins-txd {
+                       pinmux = <PINMUX_GPIO131__FUNC_O_GBE_TXD3>,
+                                <PINMUX_GPIO132__FUNC_O_GBE_TXD2>,
+                                <PINMUX_GPIO133__FUNC_O_GBE_TXD1>,
+                                <PINMUX_GPIO134__FUNC_O_GBE_TXD0>;
+                       drive-strength = <8>;
+               };
+       };
+
+       eth_sleep_pins: eth-sleep-pins {
+               pins-cc {
+                       pinmux = <PINMUX_GPIO139__FUNC_B_GPIO139>,
+                                <PINMUX_GPIO140__FUNC_B_GPIO140>,
+                                <PINMUX_GPIO141__FUNC_B_GPIO141>,
+                                <PINMUX_GPIO142__FUNC_B_GPIO142>;
+               };
+
+               pins-mdio {
+                       pinmux = <PINMUX_GPIO143__FUNC_B_GPIO143>,
+                                <PINMUX_GPIO144__FUNC_B_GPIO144>;
+                       input-disable;
+                       bias-disable;
+               };
+
+               pins-rxd {
+                       pinmux = <PINMUX_GPIO135__FUNC_B_GPIO135>,
+                                <PINMUX_GPIO136__FUNC_B_GPIO136>,
+                                <PINMUX_GPIO137__FUNC_B_GPIO137>,
+                                <PINMUX_GPIO138__FUNC_B_GPIO138>;
+               };
+
+               pins-txd {
+                       pinmux = <PINMUX_GPIO131__FUNC_B_GPIO131>,
+                                <PINMUX_GPIO132__FUNC_B_GPIO132>,
+                                <PINMUX_GPIO133__FUNC_B_GPIO133>,
+                                <PINMUX_GPIO134__FUNC_B_GPIO134>;
+               };
+       };
+
+       i2c0_pins: i2c0-pins {
+               pins {
+                       pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
+                                <PINMUX_GPIO55__FUNC_B1_SCL0>;
+                       bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+                       drive-strength-microamp = <1000>;
+               };
+       };
+
+       i2c1_pins: i2c1-pins {
+               pins {
+                       pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
+                                <PINMUX_GPIO57__FUNC_B1_SCL1>;
+                       bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+                       drive-strength-microamp = <1000>;
+               };
+       };
+
+       i2c2_pins: i2c2-pins {
+               pins {
+                       pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
+                                <PINMUX_GPIO59__FUNC_B1_SCL2>;
+                       bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+                       drive-strength-microamp = <1000>;
+               };
+       };
+
+       i2c3_pins: i2c3-pins {
+               pins {
+                       pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
+                                <PINMUX_GPIO61__FUNC_B1_SCL3>;
+                       bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+                       drive-strength-microamp = <1000>;
+               };
+       };
+
+       i2c4_pins: i2c4-pins {
+               pins {
+                       pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
+                                <PINMUX_GPIO63__FUNC_B1_SCL4>;
+                       bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+                       drive-strength-microamp = <1000>;
+               };
+       };
+
+       i2c5_pins: i2c5-pins {
+               pins {
+                       pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
+                                <PINMUX_GPIO65__FUNC_B1_SCL5>;
+                       bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+                       drive-strength-microamp = <1000>;
+               };
+       };
+
+       i2c6_pins: i2c6-pins {
+               pins {
+                       pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
+                                <PINMUX_GPIO67__FUNC_B1_SCL6>;
+                       bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+                       drive-strength-microamp = <1000>;
+               };
+       };
+
+       gpio_key_pins: gpio-key-pins {
+               pins {
+                       pinmux = <PINMUX_GPIO42__FUNC_B1_KPCOL0>,
+                                <PINMUX_GPIO43__FUNC_B1_KPCOL1>,
+                                <PINMUX_GPIO44__FUNC_B1_KPROW0>;
+               };
+       };
+
+       mmc0_default_pins: mmc0-default-pins {
+               pins-clk {
+                       pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+                       drive-strength = <6>;
+                       bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+               };
+
+               pins-cmd-dat {
+                       pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+                                <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+                                <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+                                <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+                                <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+                                <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+                                <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+                                <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+                                <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+                       input-enable;
+                       drive-strength = <6>;
+                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+               };
+
+               pins-rst {
+                       pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+                       drive-strength = <6>;
+                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+               };
+       };
+
+       mmc0_uhs_pins: mmc0-uhs-pins {
+               pins-clk {
+                       pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+                       drive-strength = <8>;
+                       bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+               };
+
+               pins-cmd-dat {
+                       pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+                                <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+                                <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+                                <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+                                <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+                                <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+                                <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+                                <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+                                <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+                       input-enable;
+                       drive-strength = <8>;
+                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+               };
+
+               pins-ds {
+                       pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
+                       drive-strength = <8>;
+                       bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+               };
+
+               pins-rst {
+                       pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+                       drive-strength = <8>;
+                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+               };
+       };
+
+       mmc1_default_pins: mmc1-default-pins {
+               pins-clk {
+                       pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
+                       drive-strength = <6>;
+                       bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+               };
+
+               pins-cmd-dat {
+                       pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>,
+                                <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>,
+                                <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>,
+                                <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
+                                <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
+                       input-enable;
+                       drive-strength = <6>;
+                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+               };
+
+               pins-insert {
+                       pinmux = <PINMUX_GPIO2__FUNC_B_GPIO2>;
+                       bias-pull-up;
+               };
+       };
+
+       mmc1_uhs_pins: mmc1-uhs-pins {
+               pins-clk {
+                       pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
+                       drive-strength = <6>;
+                       bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+               };
+
+               pins-cmd-dat {
+                       pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>,
+                                <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>,
+                                <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>,
+                                <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
+                                <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
+                       input-enable;
+                       drive-strength = <6>;
+                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+               };
+       };
+
+       mmc2_default_pins: mmc2-default-pins {
+               pins-clk {
+                       pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
+                       drive-strength = <4>;
+                       bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+               };
+
+               pins-cmd-dat {
+                       pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>,
+                                <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>,
+                                <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>,
+                                <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
+                                <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
+                       input-enable;
+                       drive-strength = <6>;
+                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+               };
+
+               pins-pcm {
+                       pinmux = <PINMUX_GPIO123__FUNC_O_PCM_DO>;
+               };
+       };
+
+       mmc2_uhs_pins: mmc2-uhs-pins {
+               pins-clk {
+                       pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
+                       drive-strength = <4>;
+                       bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+               };
+
+               pins-cmd-dat {
+                       pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>,
+                                <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>,
+                                <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>,
+                                <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
+                                <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
+                       input-enable;
+                       drive-strength = <6>;
+                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+               };
+       };
+
+       mmc2_eint_pins: mmc2-eint-pins {
+               pins-dat1 {
+                       pinmux = <PINMUX_GPIO172__FUNC_B_GPIO172>;
+                       input-enable;
+                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+               };
+       };
+
+       mmc2_dat1_pins: mmc2-dat1-pins {
+               pins-dat1 {
+                       pinmux = <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>;
+                       input-enable;
+                       drive-strength = <6>;
+                       bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+               };
+       };
+
+       panel_default_pins: panel-default-pins {
+               pins-dcdc {
+                       pinmux = <PINMUX_GPIO45__FUNC_B_GPIO45>;
+                       output-low;
+               };
+
+               pins-en {
+                       pinmux = <PINMUX_GPIO111__FUNC_B_GPIO111>;
+                       output-low;
+               };
+
+               pins-rst {
+                       pinmux = <PINMUX_GPIO25__FUNC_B_GPIO25>;
+                       output-high;
+               };
+       };
+
+       pcie_pins_default: pcie-default {
+               mux {
+                       pinmux = <PINMUX_GPIO47__FUNC_I1_WAKEN>,
+                                <PINMUX_GPIO48__FUNC_O_PERSTN>,
+                                <PINMUX_GPIO49__FUNC_B1_CLKREQN>;
+                       bias-pull-up;
+               };
+       };
+
+       rt1715_int_pins: rt1715-int-pins {
+               pins_cmd0_dat {
+                       pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>;
+                       bias-pull-up;
+                       input-enable;
+               };
+       };
+
+       spi0_pins: spi0-pins {
+               pins-spi {
+                       pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
+                               <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
+                               <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
+                               <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
+                       bias-disable;
+               };
+       };
+
+       spi1_pins: spi1-pins {
+               pins-spi {
+                       pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+                               <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+                               <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
+                               <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+                       bias-disable;
+               };
+       };
+
+       spi2_pins: spi2-pins {
+               pins-spi {
+                       pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
+                               <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
+                               <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
+                               <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
+                       bias-disable;
+               };
+       };
+
+       touch_pins: touch-pins {
+               pins-irq {
+                       pinmux = <PINMUX_GPIO6__FUNC_B_GPIO6>;
+                       input-enable;
+                       bias-disable;
+               };
+
+               pins-reset {
+                       pinmux = <PINMUX_GPIO5__FUNC_B_GPIO5>;
+                       output-high;
+               };
+       };
+
+       uart0_pins: uart0-pins {
+               pins {
+                       pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
+                                <PINMUX_GPIO32__FUNC_I1_URXD0>;
+                       bias-pull-up;
+               };
+       };
+
+       uart1_pins: uart1-pins {
+               pins {
+                       pinmux = <PINMUX_GPIO33__FUNC_O_UTXD1>,
+                                <PINMUX_GPIO34__FUNC_I1_URXD1>;
+                       bias-pull-up;
+               };
+       };
+
+       uart2_pins: uart2-pins {
+               pins {
+                       pinmux = <PINMUX_GPIO35__FUNC_O_UTXD2>,
+                                <PINMUX_GPIO36__FUNC_I1_URXD2>;
+                       bias-pull-up;
+               };
+       };
+
+       usb_default_pins: usb-default-pins {
+               pins-iddig {
+                       pinmux = <PINMUX_GPIO83__FUNC_B_GPIO83>;
+                       input-enable;
+                       bias-pull-up;
+               };
+
+               pins-valid {
+                       pinmux = <PINMUX_GPIO85__FUNC_I0_VBUSVALID>;
+                       input-enable;
+               };
+
+               pins-vbus {
+                       pinmux = <PINMUX_GPIO84__FUNC_O_USB_DRVVBUS>;
+                       output-high;
+               };
+
+       };
+
+       usb1_default_pins: usb1-default-pins {
+               pins-valid {
+                       pinmux = <PINMUX_GPIO88__FUNC_I0_VBUSVALID_1P>;
+                       input-enable;
+               };
+
+               pins-usb-hub-3v3-en {
+                       pinmux = <PINMUX_GPIO112__FUNC_B_GPIO112>;
+                       output-high;
+               };
+       };
+
+       wifi_pwrseq_pins: wifi-pwrseq-pins {
+               pins-wifi-enable {
+                       pinmux = <PINMUX_GPIO127__FUNC_B_GPIO127>;
+                       output-low;
+               };
+       };
+};
+
+&eth {
+       phy-mode ="rgmii-id";
+       phy-handle = <&ethernet_phy0>;
+       pinctrl-names = "default", "sleep";
+       pinctrl-0 = <&eth_default_pins>;
+       pinctrl-1 = <&eth_sleep_pins>;
+       mediatek,mac-wol;
+       snps,reset-gpio = <&pio 147 GPIO_ACTIVE_HIGH>;
+       snps,reset-delays-us = <0 10000 10000>;
+       status = "okay";
+};
+
+&eth_mdio {
+       ethernet_phy0: ethernet-phy@1 {
+               compatible = "ethernet-phy-id001c.c916";
+               reg = <0x1>;
+       };
+};
+
+&pmic {
+       interrupt-parent = <&pio>;
+       interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
+
+       mt6359keys: keys {
+               compatible = "mediatek,mt6359-keys";
+               mediatek,long-press-mode = <1>;
+               power-off-time-sec = <0>;
+
+               power-key {
+                       linux,keycodes = <KEY_POWER>;
+                       wakeup-source;
+               };
+       };
+};
+
+&scp {
+       memory-region = <&scp_mem>;
+       status = "okay";
+};
+
+&sound {
+       compatible = "mediatek,mt8390-mt6359-evk", "mediatek,mt8188-mt6359-evb";
+       model = "mt8390-evk";
+       pinctrl-names = "default";
+       pinctrl-0 = <&audio_default_pins>;
+       audio-routing =
+               "Headphone", "Headphone L",
+               "Headphone", "Headphone R";
+       mediatek,adsp = <&adsp>;
+       status = "okay";
+
+       dai-link-0 {
+               link-name = "DL_SRC_BE";
+
+               codec {
+                       sound-dai = <&pmic 0>;
+               };
+       };
+};
+
+&spi2 {
+       pinctrl-0 = <&spi2_pins>;
+       pinctrl-names = "default";
+       mediatek,pad-select = <0>;
+       #address-cells = <1>;
+       #size-cells = <0>;
+       status = "okay";
+};
+
+&uart0 {
+       pinctrl-0 = <&uart0_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+};
+
+&uart1 {
+       pinctrl-0 = <&uart1_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-0 = <&uart2_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+};
+
+&u3phy0 {
+       status = "okay";
+};
+
+&u3phy1 {
+       status = "okay";
+};
+
+&u3phy2 {
+       status = "okay";
+};
+
+&xhci0 {
+       status = "okay";
+       vusb33-supply = <&mt6359_vusb_ldo_reg>;
+};
+
+&xhci1 {
+       status = "okay";
+       vusb33-supply = <&mt6359_vusb_ldo_reg>;
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       hub_2_0: hub@1 {
+               compatible = "usb451,8025";
+               reg = <1>;
+               peer-hub = <&hub_3_0>;
+               reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+               vdd-supply = <&usb_hub_fixed_3v3>;
+       };
+
+       hub_3_0: hub@2 {
+               compatible = "usb451,8027";
+               reg = <2>;
+               peer-hub = <&hub_2_0>;
+               reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+               vdd-supply = <&usb_hub_fixed_3v3>;
+       };
+};
+
+&xhci2 {
+       status = "okay";
+       vusb33-supply = <&mt6359_vusb_ldo_reg>;
+       vbus-supply = <&sdio_fixed_3v3>; /* wifi_3v3 */
+};