- README for the Intel PRO/Wireless 2915ABG and 2200BG driver.
 README.sb1000
        - info on General Instrument/NextLevel SURFboard1000 cable modem.
-alias.txt
-       - info on using alias network devices.
 altera_tse.txt
        - Altera Triple-Speed Ethernet controller.
 arcnet-hardware.txt
 
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0
+
+===========
+IP-Aliasing
+===========
+
+IP-aliases are an obsolete way to manage multiple IP-addresses/masks
+per interface. Newer tools such as iproute2 support multiple
+address/prefixes per interface, but aliases are still supported
+for backwards compatibility.
+
+An alias is formed by adding a colon and a string when running ifconfig.
+This string is usually numeric, but this is not a must.
+
+
+Alias creation
+==============
+
+Alias creation is done by 'magic' interface naming: eg. to create a
+200.1.1.1 alias for eth0 ...
+::
+
+  # ifconfig eth0:0 200.1.1.1  etc,etc....
+       ~~ -> request alias #0 creation (if not yet exists) for eth0
+
+The corresponding route is also set up by this command.  Please note:
+The route always points to the base interface.
+
+
+Alias deletion
+==============
+
+The alias is removed by shutting the alias down::
+
+  # ifconfig eth0:0 down
+       ~~~~~~~~~~ -> will delete alias
+
+
+Alias (re-)configuring
+======================
+
+Aliases are not real devices, but programs should be able to configure
+and refer to them as usual (ifconfig, route, etc).
+
+
+Relationship with main device
+=============================
+
+If the base device is shut down the added aliases will be deleted too.
 
+++ /dev/null
-
-IP-Aliasing:
-============
-
-IP-aliases are an obsolete way to manage multiple IP-addresses/masks
-per interface. Newer tools such as iproute2 support multiple
-address/prefixes per interface, but aliases are still supported
-for backwards compatibility.
-
-An alias is formed by adding a colon and a string when running ifconfig.
-This string is usually numeric, but this is not a must.
-
-o Alias creation.
-  Alias creation is done by 'magic' interface naming: eg. to create a
-  200.1.1.1 alias for eth0 ...
-  
-    # ifconfig eth0:0 200.1.1.1  etc,etc....
-                   ~~ -> request alias #0 creation (if not yet exists) for eth0
-
-    The corresponding route is also set up by this command. 
-    Please note: The route always points to the base interface.
-       
-
-o Alias deletion.
-  The alias is removed by shutting the alias down:
-
-    # ifconfig eth0:0 down
-                 ~~~~~~~~~~ -> will delete alias
-
-                                  
-o Alias (re-)configuring
-
-  Aliases are not real devices, but programs should be able to configure and
-  refer to them as usual (ifconfig, route, etc).
-
-
-o Relationship with main device
-
-  If the base device is shut down the added aliases will be deleted 
-  too.
 
    msg_zerocopy
    failover
    net_failover
+   alias
 
 .. only::  subproject