* when this bit is set.
*/
pls |= USB_PORT_STAT_CONNECTION;
+ } else {
+ /*
+ * If CAS bit isn't set but the Port is already at
+ * Compliance Mode, fake a connection so the USB core
+ * notices the Compliance state and resets the port.
+ * This resolves an issue generated by the SN65LVPE502CP
+ * in which sometimes the port enters compliance mode
+ * caused by a delay on the host-device negotiation.
+ */
+ if (pls == USB_SS_PORT_LS_COMP_MOD)
+ pls |= USB_PORT_STAT_CONNECTION;
}
+
/* update status field */
*status |= pls;
}
+/*
+ * Function for Compliance Mode Quirk.
+ *
+ * This Function verifies if all xhc USB3 ports have entered U0, if so,
+ * the compliance mode timer is deleted. A port won't enter
+ * compliance mode if it has previously entered U0.
+ */
+void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex)
+{
+ u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1);
+ bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0);
+
+ if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK))
+ return;
+
+ if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) {
+ xhci->port_status_u0 |= 1 << wIndex;
+ if (xhci->port_status_u0 == all_ports_seen_u0) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "All USB3 ports have entered U0 already!\n");
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted.\n");
+ }
+ }
+}
+
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
/* Update Port Link State for super speed ports*/
if (hcd->speed == HCD_USB3) {
xhci_hub_report_link_state(&status, temp);
+ /*
+ * Verify if all USB3 Ports Have entered U0 already.
+ * Delete Compliance Mode Timer if so.
+ */
+ xhci_del_comp_mod_timer(xhci, temp, wIndex);
}
if (bus_state->port_c_suspend & (1 << wIndex))
status |= 1 << USB_PORT_FEAT_C_SUSPEND;
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
+#include <linux/dmi.h>
#include "xhci.h"
#endif
+static void compliance_mode_recovery(unsigned long arg)
+{
+ struct xhci_hcd *xhci;
+ struct usb_hcd *hcd;
+ u32 temp;
+ int i;
+
+ xhci = (struct xhci_hcd *)arg;
+
+ for (i = 0; i < xhci->num_usb3_ports; i++) {
+ temp = xhci_readl(xhci, xhci->usb3_ports[i]);
+ if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) {
+ /*
+ * Compliance Mode Detected. Letting USB Core
+ * handle the Warm Reset
+ */
+ xhci_dbg(xhci, "Compliance Mode Detected->Port %d!\n",
+ i + 1);
+ xhci_dbg(xhci, "Attempting Recovery routine!\n");
+ hcd = xhci->shared_hcd;
+
+ if (hcd->state == HC_STATE_SUSPENDED)
+ usb_hcd_resume_root_hub(hcd);
+
+ usb_hcd_poll_rh_status(hcd);
+ }
+ }
+
+ if (xhci->port_status_u0 != ((1 << xhci->num_usb3_ports)-1))
+ mod_timer(&xhci->comp_mode_recovery_timer,
+ jiffies + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+}
+
+/*
+ * Quirk to work around issue generated by the SN65LVPE502CP USB3.0 re-driver
+ * that causes ports behind that hardware to enter compliance mode sometimes.
+ * The quirk creates a timer that polls every 2 seconds the link state of
+ * each host controller's port and recovers it by issuing a Warm reset
+ * if Compliance mode is detected, otherwise the port will become "dead" (no
+ * device connections or disconnections will be detected anymore). Becasue no
+ * status event is generated when entering compliance mode (per xhci spec),
+ * this quirk is needed on systems that have the failing hardware installed.
+ */
+static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
+{
+ xhci->port_status_u0 = 0;
+ init_timer(&xhci->comp_mode_recovery_timer);
+
+ xhci->comp_mode_recovery_timer.data = (unsigned long) xhci;
+ xhci->comp_mode_recovery_timer.function = compliance_mode_recovery;
+ xhci->comp_mode_recovery_timer.expires = jiffies +
+ msecs_to_jiffies(COMP_MODE_RCVRY_MSECS);
+
+ set_timer_slack(&xhci->comp_mode_recovery_timer,
+ msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+ add_timer(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer Initialized.\n");
+}
+
+/*
+ * This function identifies the systems that have installed the SN65LVPE502CP
+ * USB3.0 re-driver and that need the Compliance Mode Quirk.
+ * Systems:
+ * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
+ */
+static bool compliance_mode_recovery_timer_quirk_check(void)
+{
+ const char *dmi_product_name, *dmi_sys_vendor;
+
+ dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+ dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+
+ if (!(strstr(dmi_sys_vendor, "Hewlett-Packard")))
+ return false;
+
+ if (strstr(dmi_product_name, "Z420") ||
+ strstr(dmi_product_name, "Z620") ||
+ strstr(dmi_product_name, "Z820"))
+ return true;
+
+ return false;
+}
+
+static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci)
+{
+ return (xhci->port_status_u0 == ((1 << xhci->num_usb3_ports)-1));
+}
+
+
/*
* Initialize memory for HCD and xHC (one-time init).
*
retval = xhci_mem_init(xhci, GFP_KERNEL);
xhci_dbg(xhci, "Finished xhci_init\n");
+ /* Initializing Compliance Mode Recovery Data If Needed */
+ if (compliance_mode_recovery_timer_quirk_check()) {
+ xhci->quirks |= XHCI_COMP_MODE_QUIRK;
+ compliance_mode_recovery_timer_init(xhci);
+ }
+
return retval;
}
del_timer_sync(&xhci->event_ring_timer);
#endif
+ /* Deleting Compliance Mode Recovery Timer */
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ (!(xhci_all_ports_seen_u0(xhci))))
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+
if (xhci->quirks & XHCI_AMD_PLL_FIX)
usb_amd_dev_put();
}
spin_unlock_irq(&xhci->lock);
+ /*
+ * Deleting Compliance Mode Recovery Timer because the xHCI Host
+ * is about to be suspended.
+ */
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ (!(xhci_all_ports_seen_u0(xhci)))) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted!\n");
+ }
+
/* step 5: remove core well power */
/* synchronize irq when using MSI-X */
xhci_msix_sync_irqs(xhci);
usb_hcd_resume_root_hub(hcd);
usb_hcd_resume_root_hub(xhci->shared_hcd);
}
+
+ /*
+ * If system is subject to the Quirk, Compliance Mode Timer needs to
+ * be re-initialized Always after a system resume. Ports are subject
+ * to suffer the Compliance Mode issue again. It doesn't matter if
+ * ports have entered previously to U0 before system's suspension.
+ */
+ if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+ compliance_mode_recovery_timer_init(xhci);
+
return retval;
}
#endif /* CONFIG_PM */
projects / users / hch / configfs.git / commitdiff