#define LED_OFF_MS 500
enum mos7840_flag {
- MOS7840_FLAG_CTRL_BUSY,
MOS7840_FLAG_LED_BUSY,
};
__u8 shadowLCR; /* last LCR value received */
__u8 shadowMCR; /* last MCR value received */
char open;
- char open_ports;
struct usb_serial_port *port; /* loop back to the owner of this object */
/* Offsets */
__u8 SpRegOffset;
__u8 ControlRegOffset;
__u8 DcrRegOffset;
- /* for processing control URBS in interrupt context */
- struct urb *control_urb;
- struct usb_ctrlrequest *dr;
- char *ctrl_buf;
- int MsrLsr;
spinlock_t pool_lock;
struct urb *write_urb_pool[NUM_URBS];
return (struct moschip_port *)usb_get_serial_port_data(port);
}
-static void mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr)
-{
- struct moschip_port *mos7840_port;
- struct async_icount *icount;
- mos7840_port = port;
- if (new_msr &
- (MOS_MSR_DELTA_CTS | MOS_MSR_DELTA_DSR | MOS_MSR_DELTA_RI |
- MOS_MSR_DELTA_CD)) {
- icount = &mos7840_port->port->icount;
-
- /* update input line counters */
- if (new_msr & MOS_MSR_DELTA_CTS)
- icount->cts++;
- if (new_msr & MOS_MSR_DELTA_DSR)
- icount->dsr++;
- if (new_msr & MOS_MSR_DELTA_CD)
- icount->dcd++;
- if (new_msr & MOS_MSR_DELTA_RI)
- icount->rng++;
-
- wake_up_interruptible(&port->port->port.delta_msr_wait);
- }
-}
-
-static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr)
-{
- struct async_icount *icount;
-
- if (new_lsr & SERIAL_LSR_BI) {
- /*
- * Parity and Framing errors only count if they
- * occur exclusive of a break being
- * received.
- */
- new_lsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI);
- }
-
- /* update input line counters */
- icount = &port->port->icount;
- if (new_lsr & SERIAL_LSR_BI)
- icount->brk++;
- if (new_lsr & SERIAL_LSR_OE)
- icount->overrun++;
- if (new_lsr & SERIAL_LSR_PE)
- icount->parity++;
- if (new_lsr & SERIAL_LSR_FE)
- icount->frame++;
-}
-
/************************************************************************/
/************************************************************************/
/* U S B C A L L B A C K F U N C T I O N S */
/************************************************************************/
/************************************************************************/
-static void mos7840_control_callback(struct urb *urb)
-{
- unsigned char *data;
- struct moschip_port *mos7840_port;
- struct device *dev = &urb->dev->dev;
- __u8 regval = 0x0;
- int status = urb->status;
-
- mos7840_port = urb->context;
-
- switch (status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status);
- goto out;
- default:
- dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status);
- goto out;
- }
-
- dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length);
- if (urb->actual_length < 1)
- goto out;
-
- dev_dbg(dev, "%s mos7840_port->MsrLsr is %d port %d\n", __func__,
- mos7840_port->MsrLsr, mos7840_port->port_num);
- data = urb->transfer_buffer;
- regval = (__u8) data[0];
- dev_dbg(dev, "%s data is %x\n", __func__, regval);
- if (mos7840_port->MsrLsr == 0)
- mos7840_handle_new_msr(mos7840_port, regval);
- else if (mos7840_port->MsrLsr == 1)
- mos7840_handle_new_lsr(mos7840_port, regval);
-out:
- clear_bit_unlock(MOS7840_FLAG_CTRL_BUSY, &mos7840_port->flags);
-}
-
-static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
- __u16 *val)
-{
- struct usb_device *dev = mcs->port->serial->dev;
- struct usb_ctrlrequest *dr = mcs->dr;
- unsigned char *buffer = mcs->ctrl_buf;
- int ret;
-
- if (test_and_set_bit_lock(MOS7840_FLAG_CTRL_BUSY, &mcs->flags))
- return -EBUSY;
-
- dr->bRequestType = MCS_RD_RTYPE;
- dr->bRequest = MCS_RDREQ;
- dr->wValue = cpu_to_le16(Wval); /* 0 */
- dr->wIndex = cpu_to_le16(reg);
- dr->wLength = cpu_to_le16(2);
-
- usb_fill_control_urb(mcs->control_urb, dev, usb_rcvctrlpipe(dev, 0),
- (unsigned char *)dr, buffer, 2,
- mos7840_control_callback, mcs);
- mcs->control_urb->transfer_buffer_length = 2;
- ret = usb_submit_urb(mcs->control_urb, GFP_ATOMIC);
- if (ret)
- clear_bit_unlock(MOS7840_FLAG_CTRL_BUSY, &mcs->flags);
-
- return ret;
-}
-
static void mos7840_set_led_callback(struct urb *urb)
{
switch (urb->status) {
jiffies + msecs_to_jiffies(LED_ON_MS));
}
-/*****************************************************************************
- * mos7840_interrupt_callback
- * this is the callback function for when we have received data on the
- * interrupt endpoint.
- *****************************************************************************/
-
-static void mos7840_interrupt_callback(struct urb *urb)
-{
- int result;
- int length;
- struct moschip_port *mos7840_port;
- struct usb_serial *serial;
- __u16 Data;
- unsigned char *data;
- __u8 sp[5];
- int i, rv = 0;
- __u16 wval, wreg = 0;
- int status = urb->status;
-
- switch (status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n",
- __func__, status);
- return;
- default:
- dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n",
- __func__, status);
- goto exit;
- }
-
- length = urb->actual_length;
- data = urb->transfer_buffer;
-
- serial = urb->context;
-
- /* Moschip get 5 bytes
- * Byte 1 IIR Port 1 (port.number is 0)
- * Byte 2 IIR Port 2 (port.number is 1)
- * Byte 3 IIR Port 3 (port.number is 2)
- * Byte 4 IIR Port 4 (port.number is 3)
- * Byte 5 FIFO status for both */
-
- if (length > 5) {
- dev_dbg(&urb->dev->dev, "%s", "Wrong data !!!\n");
- return;
- }
-
- sp[0] = (__u8) data[0];
- sp[1] = (__u8) data[1];
- sp[2] = (__u8) data[2];
- sp[3] = (__u8) data[3];
-
- for (i = 0; i < serial->num_ports; i++) {
- mos7840_port = mos7840_get_port_private(serial->port[i]);
- wval = ((__u16)serial->port[i]->port_number + 1) << 8;
- if (mos7840_port->open) {
- if (sp[i] & 0x01) {
- dev_dbg(&urb->dev->dev, "SP%d No Interrupt !!!\n", i);
- } else {
- switch (sp[i] & 0x0f) {
- case SERIAL_IIR_RLS:
- dev_dbg(&urb->dev->dev, "Serial Port %d: Receiver status error or \n", i);
- dev_dbg(&urb->dev->dev, "address bit detected in 9-bit mode\n");
- mos7840_port->MsrLsr = 1;
- wreg = LINE_STATUS_REGISTER;
- break;
- case SERIAL_IIR_MS:
- dev_dbg(&urb->dev->dev, "Serial Port %d: Modem status change\n", i);
- mos7840_port->MsrLsr = 0;
- wreg = MODEM_STATUS_REGISTER;
- break;
- }
- rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data);
- }
- }
- }
- if (!(rv < 0))
- /* the completion handler for the control urb will resubmit */
- return;
-exit:
- result = usb_submit_urb(urb, GFP_ATOMIC);
- if (result) {
- dev_err(&urb->dev->dev,
- "%s - Error %d submitting interrupt urb\n",
- __func__, result);
- }
-}
-
static int mos7840_port_paranoia_check(struct usb_serial_port *port,
const char *function)
{
__u16 Data;
int status;
struct moschip_port *mos7840_port;
- struct moschip_port *port0;
if (mos7840_port_paranoia_check(port, __func__))
return -ENODEV;
return -ENODEV;
mos7840_port = mos7840_get_port_private(port);
- port0 = mos7840_get_port_private(serial->port[0]);
-
- if (mos7840_port == NULL || port0 == NULL)
+ if (mos7840_port == NULL)
return -ENODEV;
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
- port0->open_ports++;
/* Initialising the write urb pool */
for (j = 0; j < NUM_URBS; ++j) {
status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset,
Data);
- /* Check to see if we've set up our endpoint info yet *
- * (can't set it up in mos7840_startup as the structures *
- * were not set up at that time.) */
- if (port0->open_ports == 1) {
- /* FIXME: Buffer never NULL, so URB is not submitted. */
- if (serial->port[0]->interrupt_in_buffer == NULL) {
- /* set up interrupt urb */
- usb_fill_int_urb(serial->port[0]->interrupt_in_urb,
- serial->dev,
- usb_rcvintpipe(serial->dev,
- serial->port[0]->interrupt_in_endpointAddress),
- serial->port[0]->interrupt_in_buffer,
- serial->port[0]->interrupt_in_urb->
- transfer_buffer_length,
- mos7840_interrupt_callback,
- serial,
- serial->port[0]->interrupt_in_urb->interval);
-
- /* start interrupt read for mos7840 */
- response =
- usb_submit_urb(serial->port[0]->interrupt_in_urb,
- GFP_KERNEL);
- if (response) {
- dev_err(&port->dev, "%s - Error %d submitting "
- "interrupt urb\n", __func__, response);
- }
-
- }
-
- }
-
- /* see if we've set up our endpoint info yet *
- * (can't set it up in mos7840_startup as the *
- * structures were not set up at that time.) */
-
dev_dbg(&port->dev, "port number is %d\n", port->port_number);
dev_dbg(&port->dev, "minor number is %d\n", port->minor);
dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
{
struct usb_serial *serial;
struct moschip_port *mos7840_port;
- struct moschip_port *port0;
int j;
__u16 Data;
return;
mos7840_port = mos7840_get_port_private(port);
- port0 = mos7840_get_port_private(serial->port[0]);
-
- if (mos7840_port == NULL || port0 == NULL)
+ if (mos7840_port == NULL)
return;
for (j = 0; j < NUM_URBS; ++j)
usb_kill_urb(mos7840_port->read_urb);
mos7840_port->read_urb_busy = false;
- port0->open_ports--;
- dev_dbg(&port->dev, "%s in close%d\n", __func__, port0->open_ports);
- if (port0->open_ports == 0) {
- if (serial->port[0]->interrupt_in_urb) {
- dev_dbg(&port->dev, "Shutdown interrupt_in_urb\n");
- usb_kill_urb(serial->port[0]->interrupt_in_urb);
- }
- }
-
Data = 0x0;
mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 1, status);
}
- mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL);
- mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
- mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest),
- GFP_KERNEL);
- if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf ||
- !mos7840_port->dr) {
- status = -ENOMEM;
- goto error;
- }
mos7840_port->has_led = device_flags & MCS_LED;
error:
kfree(mos7840_port->led_dr);
usb_free_urb(mos7840_port->led_urb);
- kfree(mos7840_port->dr);
- kfree(mos7840_port->ctrl_buf);
- usb_free_urb(mos7840_port->control_urb);
kfree(mos7840_port);
return status;
usb_free_urb(mos7840_port->led_urb);
kfree(mos7840_port->led_dr);
}
- usb_kill_urb(mos7840_port->control_urb);
- usb_free_urb(mos7840_port->control_urb);
- kfree(mos7840_port->ctrl_buf);
- kfree(mos7840_port->dr);
+
kfree(mos7840_port);
return 0;
.break_ctl = mos7840_break,
.tiocmget = mos7840_tiocmget,
.tiocmset = mos7840_tiocmset,
- .tiocmiwait = usb_serial_generic_tiocmiwait,
.get_icount = usb_serial_generic_get_icount,
.port_probe = mos7840_port_probe,
.port_remove = mos7840_port_remove,
.read_bulk_callback = mos7840_bulk_in_callback,
- .read_int_callback = mos7840_interrupt_callback,
};
static struct usb_serial_driver * const serial_drivers[] = {
projects / users / hch / configfs.git / commitdiff