staging: comedi: pcl812: clarify pcl812_reset()

Instead of using the 'board_type' and the switch, use the boardinfo
to determine what should be reset.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/pcl812.c b/drivers/staging/comedi/drivers/pcl812.c
index 2487d44304b083b7585d21ef98ef69cc1aa28056..5436cd9dd7ba3ddae2e9d4412db9373bfc59964e 100644 (file)
--- a/drivers/staging/comedi/drivers/pcl812.c
+++ b/drivers/staging/comedi/drivers/pcl812.c
@@ -1107,6 +1107,16 @@ static void pcl812_reset(struct comedi_device *dev)
 {
        const struct pcl812_board *board = comedi_board(dev);
        struct pcl812_private *devpriv = dev->private;
+       unsigned int chan;
+
+       /* disable analog input trigger */
+       outb(devpriv->mode_reg_int | PCL812_CTRL_DISABLE_TRIG,
+            dev->iobase + PCL812_CTRL_REG);
+       pcl812_ai_clear_eoc(dev);
+
+       /* stop pacer */
+       if (board->IRQbits)
+               pcl812_start_pacer(dev, false);
 
        /*
         * Invalidate last_ai_chanspec then set analog input to
@@ -1115,33 +1125,17 @@ static void pcl812_reset(struct comedi_device *dev)
        devpriv->last_ai_chanspec = CR_PACK(16, 0, 0);
        pcl812_ai_set_chan_range(dev, CR_PACK(0, 0, 0), 0);
 
-       switch (board->board_type) {
-       case boardPCL812PG:
-       case boardPCL812:
-       case boardACL8112:
-       case boardACL8216:
-               /* set analog output channel 1 to 0V */
-               outb(0, dev->iobase + PCL812_AO_LSB_REG(1));
-               outb(0, dev->iobase + PCL812_AO_MSB_REG(1));
-       case boardA821:
-               /* set analog output channel 0 to 0V */
-               outb(0, dev->iobase + PCL812_AO_LSB_REG(0));
-               outb(0, dev->iobase + PCL812_AO_MSB_REG(0));
-               pcl812_start_pacer(dev, false);
+       /* set analog output channels to 0V */
+       for (chan = 0; chan < board->n_aochan; chan++) {
+               outb(0, dev->iobase + PCL812_AO_LSB_REG(chan));
+               outb(0, dev->iobase + PCL812_AO_MSB_REG(chan));
+       }
+
+       /* set all digital outputs low */
+       if (board->has_dio) {
                outb(0, dev->iobase + PCL812_DO_MSB_REG);
                outb(0, dev->iobase + PCL812_DO_LSB_REG);
-               outb(devpriv->mode_reg_int | PCL812_CTRL_DISABLE_TRIG,
-                    dev->iobase + PCL812_CTRL_REG);
-               pcl812_ai_clear_eoc(dev);
-               break;
-       case boardPCL813B:
-       case boardPCL813:
-       case boardISO813:
-       case boardACL8113:
-               udelay(5);
-               break;
        }
-       udelay(5);
 }
 
 static void pcl812_set_ai_range_table(struct comedi_device *dev,