ASoC: fsl_asrc_dma: Reuse the dma channel if available in Back-End

The dma channel has been requested by Back-End cpu dai driver already.
If fsl_asrc_dma requests dma chan with same dma:tx symlink, then
there will be below warning with SDMA.

[   48.174236] fsl-esai-dai 2024000.esai: Cannot create DMA dma:tx symlink

So if we can reuse the dma channel of Back-End, then the issue can be
fixed.

In order to get the dma channel which is already requested in Back-End.
we use the exported two functions (snd_soc_lookup_component_nolocked
and soc_component_to_pcm). If we can get the dma channel, then reuse it,
if can't, then request a new one.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/3a79f0442cb4930c633cf72145cfe95a45b9c78e.1591947428.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c
index d6a3fc5f87e57bd3242c4e983745695be9942dda..d88e6343e0a2ba5b2d014c1464ea16348a06ec66 100644 (file)
--- a/sound/soc/fsl/fsl_asrc_dma.c
+++ b/sound/soc/fsl/fsl_asrc_dma.c
@@ -135,6 +135,8 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
        struct snd_dmaengine_dai_dma_data *dma_params_be = NULL;
        struct snd_pcm_runtime *runtime = substream->runtime;
        struct fsl_asrc_pair *pair = runtime->private_data;
+       struct dma_chan *tmp_chan = NULL, *be_chan = NULL;
+       struct snd_soc_component *component_be = NULL;
        struct fsl_asrc *asrc = pair->asrc;
        struct dma_slave_config config_fe, config_be;
        enum asrc_pair_index index = pair->index;
@@ -142,7 +144,6 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
        int stream = substream->stream;
        struct imx_dma_data *tmp_data;
        struct snd_soc_dpcm *dpcm;
-       struct dma_chan *tmp_chan;
        struct device *dev_be;
        u8 dir = tx ? OUT : IN;
        dma_cap_mask_t mask;
@@ -197,18 +198,30 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
        dma_cap_set(DMA_SLAVE, mask);
        dma_cap_set(DMA_CYCLIC, mask);
 
+       /*
+        * The Back-End device might have already requested a DMA channel,
+        * so try to reuse it first, and then request a new one upon NULL.
+        */
+       component_be = snd_soc_lookup_component_nolocked(dev_be, SND_DMAENGINE_PCM_DRV_NAME);
+       if (component_be) {
+               be_chan = soc_component_to_pcm(component_be)->chan[substream->stream];
+               tmp_chan = be_chan;
+       }
+       if (!tmp_chan)
+               tmp_chan = dma_request_slave_channel(dev_be, tx ? "tx" : "rx");
+
        /*
         * An EDMA DEV_TO_DEV channel is fixed and bound with DMA event of each
         * peripheral, unlike SDMA channel that is allocated dynamically. So no
-        * need to configure dma_request and dma_request2, but get dma_chan via
-        * dma_request_slave_channel directly with dma name of Front-End device
+        * need to configure dma_request and dma_request2, but get dma_chan of
+        * Back-End device directly via dma_request_slave_channel.
         */
        if (!asrc->use_edma) {
                /* Get DMA request of Back-End */
-               tmp_chan = dma_request_slave_channel(dev_be, tx ? "tx" : "rx");
                tmp_data = tmp_chan->private;
                pair->dma_data.dma_request = tmp_data->dma_request;
-               dma_release_channel(tmp_chan);
+               if (!be_chan)
+                       dma_release_channel(tmp_chan);
 
                /* Get DMA request of Front-End */
                tmp_chan = asrc->get_dma_channel(pair, dir);
@@ -221,6 +234,8 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
                pair->dma_chan[dir] =
                        dma_request_channel(mask, filter, &pair->dma_data);
        } else {
+               if (!be_chan)
+                       dma_release_channel(tmp_chan);
                pair->dma_chan[dir] =
                        asrc->get_dma_channel(pair, dir);
        }