USB: serial: ftdi_sio: clean up modem-status handling

All chip types but the original SIO (FT8U100AX) return a two-byte modem
status and there's no need to explicitly list every other type in the
handler.

Signed-off-by: Johan Hovold <johan@kernel.org>

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 4d85cc7fadcbb0aab16dbf6e94900fbc24f5980e..eecd4b13a5ec43f7ece65a5eaf94051cb8da6bec 100644 (file)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2820,27 +2820,13 @@ static int ftdi_get_modem_status(struct usb_serial_port *port,
        if (!buf)
                return -ENOMEM;
        /*
-        * The 8U232AM returns a two byte value (the SIO a 1 byte value) in
-        * the same format as the data returned from the in point.
+        * The device returns a two byte value (the SIO a 1 byte value) in the
+        * same format as the data returned from the IN endpoint.
         */
-       switch (priv->chip_type) {
-       case SIO:
+       if (priv->chip_type == SIO)
                len = 1;
-               break;
-       case FT232A:
-       case FT232B:
-       case FT2232C:
-       case FT232R:
-       case FT2232H:
-       case FT4232H:
-       case FT232H:
-       case FTX:
+       else
                len = 2;
-               break;
-       default:
-               ret = -EFAULT;
-               goto out;
-       }
 
        ret = usb_control_msg(port->serial->dev,
                        usb_rcvctrlpipe(port->serial->dev, 0),