spin_unlock(&ctrl->mbox_lock);
        return status;
 }
+
+/**
+ * be_cmd_set_vlan()- Configure VLAN paramters on the adapter
+ * @phba: device priv structure instance
+ * @vlan_tag: TAG to be set
+ *
+ * Set the VLAN_TAG for the adapter or Disable VLAN on adapter
+ *
+ * returns
+ *     TAG for the MBX Cmd
+ * **/
+int be_cmd_set_vlan(struct beiscsi_hba *phba,
+                    uint16_t vlan_tag)
+{
+       unsigned int tag = 0;
+       struct be_mcc_wrb *wrb;
+       struct be_cmd_set_vlan_req *req;
+       struct be_ctrl_info *ctrl = &phba->ctrl;
+
+       spin_lock(&ctrl->mbox_lock);
+       tag = alloc_mcc_tag(phba);
+       if (!tag) {
+               spin_unlock(&ctrl->mbox_lock);
+               return tag;
+       }
+
+       wrb = wrb_from_mccq(phba);
+       req = embedded_payload(wrb);
+       wrb->tag0 |= tag;
+       be_wrb_hdr_prepare(wrb, sizeof(*wrb), true, 0);
+       be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
+                          OPCODE_COMMON_ISCSI_NTWK_SET_VLAN,
+                          sizeof(*req));
+
+       req->interface_hndl = phba->interface_handle;
+       req->vlan_priority = vlan_tag;
+
+       be_mcc_notify(phba);
+       spin_unlock(&ctrl->mbox_lock);
+
+       return tag;
+}
 
        return ret;
 }
 
+/**
+ * beiscsi_set_vlan_tag()- Set the VLAN TAG
+ * @shost: Scsi Host for the driver instance
+ * @iface_param: Interface paramters
+ *
+ * Set the VLAN TAG for the adapter or disable
+ * the VLAN config
+ *
+ * returns
+ *     Success: 0
+ *     Failure: Non-Zero Value
+ **/
+static int
+beiscsi_set_vlan_tag(struct Scsi_Host *shost,
+                     struct iscsi_iface_param_info *iface_param)
+{
+       struct beiscsi_hba *phba = iscsi_host_priv(shost);
+       int ret = 0;
+
+       /* Get the Interface Handle */
+       if (mgmt_get_all_if_id(phba)) {
+               beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG,
+                           "BS_%d : Getting Interface Handle Failed\n");
+               return -EIO;
+       }
+
+       switch (iface_param->param) {
+       case ISCSI_NET_PARAM_VLAN_ENABLED:
+               if (iface_param->value[0] != ISCSI_VLAN_ENABLE)
+                       ret = mgmt_set_vlan(phba, BEISCSI_VLAN_DISABLE);
+               break;
+       case ISCSI_NET_PARAM_VLAN_TAG:
+               ret = mgmt_set_vlan(phba,
+                                   *((uint16_t *)iface_param->value));
+               break;
+       default:
+               beiscsi_log(phba, KERN_WARNING, BEISCSI_LOG_CONFIG,
+                           "BS_%d : Unkown Param Type : %d\n",
+                           iface_param->param);
+               return -ENOSYS;
+       }
+       return ret;
+}
+
+
 static int
 beiscsi_set_ipv4(struct Scsi_Host *shost,
                struct iscsi_iface_param_info *iface_param,
                ret = beiscsi_set_static_ip(shost, iface_param,
                                            data, dt_len);
                break;
+       case ISCSI_NET_PARAM_VLAN_ENABLED:
+       case ISCSI_NET_PARAM_VLAN_TAG:
+               ret = beiscsi_set_vlan_tag(shost, iface_param);
+               break;
        default:
                beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG,
                            "BS_%d : Param %d not supported\n",
        case ISCSI_NET_PARAM_IPV4_SUBNET:
                len = sprintf(buf, "%pI4\n", &if_info.ip_addr.subnet_mask);
                break;
+       case ISCSI_NET_PARAM_VLAN_ENABLED:
+               len = sprintf(buf, "%s\n",
+                            (if_info.vlan_priority == BEISCSI_VLAN_DISABLE)
+                            ? "Disabled" : "Enabled");
+               break;
+       case ISCSI_NET_PARAM_VLAN_ID:
+               if (if_info.vlan_priority == BEISCSI_VLAN_DISABLE)
+                       return -EINVAL;
+               else
+                       len = sprintf(buf, "%d\n",
+                                    (if_info.vlan_priority &
+                                    ISCSI_MAX_VLAN_ID));
+               break;
+       case ISCSI_NET_PARAM_VLAN_PRIORITY:
+               if (if_info.vlan_priority == BEISCSI_VLAN_DISABLE)
+                       return -EINVAL;
+               else
+                       len = sprintf(buf, "%d\n",
+                                    ((if_info.vlan_priority >> 13) &
+                                    ISCSI_MAX_VLAN_PRIORITY));
+               break;
        default:
                WARN_ON(1);
        }
        case ISCSI_NET_PARAM_IPV4_SUBNET:
        case ISCSI_NET_PARAM_IPV4_BOOTPROTO:
        case ISCSI_NET_PARAM_IPV6_ADDR:
+       case ISCSI_NET_PARAM_VLAN_ENABLED:
+       case ISCSI_NET_PARAM_VLAN_ID:
+       case ISCSI_NET_PARAM_VLAN_PRIORITY:
                len = be2iscsi_get_if_param(phba, iface, param, buf);
                break;
        case ISCSI_NET_PARAM_IFACE_ENABLE:
                case ISCSI_NET_PARAM_IPV4_BOOTPROTO:
                case ISCSI_NET_PARAM_IPV4_GW:
                case ISCSI_NET_PARAM_IPV6_ADDR:
+               case ISCSI_NET_PARAM_VLAN_ID:
+               case ISCSI_NET_PARAM_VLAN_PRIORITY:
+               case ISCSI_NET_PARAM_VLAN_ENABLED:
                        return S_IRUGO;
                default:
                        return 0;
 
                    "BG_%d : Login to Boot Target Failed\n");
        return -ENXIO;
 }
+
+/**
+ * mgmt_set_vlan()- Issue and wait for CMD completion
+ * @phba: device private structure instance
+ * @vlan_tag: VLAN tag
+ *
+ * Issue the MBX Cmd and wait for the completion of the
+ * command.
+ *
+ * returns
+ *     Success: 0
+ *     Failure: Non-Xero Value
+ **/
+int mgmt_set_vlan(struct beiscsi_hba *phba,
+                  uint16_t vlan_tag)
+{
+       unsigned int tag, wrb_num;
+       unsigned short status, extd_status;
+
+       tag = be_cmd_set_vlan(phba, vlan_tag);
+       if (!tag) {
+               beiscsi_log(phba, KERN_ERR,
+                           (BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX),
+                           "BG_%d : VLAN Setting Failed\n");
+               return -EBUSY;
+       } else
+               wait_event_interruptible(phba->ctrl.mcc_wait[tag],
+                                        phba->ctrl.mcc_numtag[tag]);
+
+       wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16;
+       extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8;
+       status = phba->ctrl.mcc_numtag[tag] & 0x000000FF;
+
+       if (status || extd_status) {
+               beiscsi_log(phba, KERN_ERR,
+                           (BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX),
+                           "BS_%d : status : %d extd_status : %d\n",
+                           status, extd_status);
+
+               free_mcc_tag(&phba->ctrl, tag);
+               return -EAGAIN;
+       }
+
+       free_mcc_tag(&phba->ctrl, tag);
+       return 0;
+}