* - Added Port-Write message handling
* - Added Machine Check exception handling
*
- * Copyright (C) 2007, 2008, 2010 Freescale Semiconductor, Inc.
+ * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
* Zhang Wei <wei.zhang@freescale.com>
*
* Copyright 2005 MontaVista Software, Inc.
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/device.h>
-#include <linux/rio.h>
-#include <linux/rio_drv.h>
#include <linux/of_platform.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/kfifo.h>
-#include <asm/io.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
#include <asm/machdep.h>
-#include <asm/uaccess.h>
-#undef DEBUG_PW /* Port-Write debugging */
+#include "fsl_rio.h"
-/* RapidIO definition irq, which read from OF-tree */
-#define IRQ_RIO_BELL(m) (((struct rio_priv *)(m->priv))->bellirq)
-#define IRQ_RIO_TX(m) (((struct rio_priv *)(m->priv))->txirq)
-#define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq)
-#define IRQ_RIO_PW(m) (((struct rio_priv *)(m->priv))->pwirq)
-
-#define IPWSR_CLEAR 0x98
-#define OMSR_CLEAR 0x1cb3
-#define IMSR_CLEAR 0x491
-#define IDSR_CLEAR 0x91
-#define ODSR_CLEAR 0x1c00
-#define LTLEECSR_ENABLE_ALL 0xFFC000FC
-#define ESCSR_CLEAR 0x07120204
-#define IECSR_CLEAR 0x80000000
+#undef DEBUG_PW /* Port-Write debugging */
#define RIO_PORT1_EDCSR 0x0640
#define RIO_PORT2_EDCSR 0x0680
#define RIO_PORT1_IECSR 0x10130
#define RIO_PORT2_IECSR 0x101B0
-#define RIO_IM0SR 0x13064
-#define RIO_IM1SR 0x13164
-#define RIO_OM0SR 0x13004
-#define RIO_OM1SR 0x13104
#define RIO_ATMU_REGS_OFFSET 0x10c00
-#define RIO_P_MSG_REGS_OFFSET 0x11000
-#define RIO_S_MSG_REGS_OFFSET 0x13000
#define RIO_GCCSR 0x13c
#define RIO_ESCSR 0x158
+#define ESCSR_CLEAR 0x07120204
#define RIO_PORT2_ESCSR 0x178
#define RIO_CCSR 0x15c
-#define RIO_LTLEDCSR 0x0608
#define RIO_LTLEDCSR_IER 0x80000000
#define RIO_LTLEDCSR_PRT 0x01000000
-#define RIO_LTLEECSR 0x060c
-#define RIO_EPWISR 0x10010
+#define IECSR_CLEAR 0x80000000
#define RIO_ISR_AACR 0x10120
#define RIO_ISR_AACR_AA 0x1 /* Accept All ID */
-#define RIO_MAINT_WIN_SIZE 0x400000
-#define RIO_DBELL_WIN_SIZE 0x1000
-
-#define RIO_MSG_OMR_MUI 0x00000002
-#define RIO_MSG_OSR_TE 0x00000080
-#define RIO_MSG_OSR_QOI 0x00000020
-#define RIO_MSG_OSR_QFI 0x00000010
-#define RIO_MSG_OSR_MUB 0x00000004
-#define RIO_MSG_OSR_EOMI 0x00000002
-#define RIO_MSG_OSR_QEI 0x00000001
-
-#define RIO_MSG_IMR_MI 0x00000002
-#define RIO_MSG_ISR_TE 0x00000080
-#define RIO_MSG_ISR_QFI 0x00000010
-#define RIO_MSG_ISR_DIQI 0x00000001
-
-#define RIO_IPWMR_SEN 0x00100000
-#define RIO_IPWMR_QFIE 0x00000100
-#define RIO_IPWMR_EIE 0x00000020
-#define RIO_IPWMR_CQ 0x00000002
-#define RIO_IPWMR_PWE 0x00000001
-
-#define RIO_IPWSR_QF 0x00100000
-#define RIO_IPWSR_TE 0x00000080
-#define RIO_IPWSR_QFI 0x00000010
-#define RIO_IPWSR_PWD 0x00000008
-#define RIO_IPWSR_PWB 0x00000004
-
-/* EPWISR Error match value */
-#define RIO_EPWISR_PINT1 0x80000000
-#define RIO_EPWISR_PINT2 0x40000000
-#define RIO_EPWISR_MU 0x00000002
-#define RIO_EPWISR_PW 0x00000001
-
-#define RIO_MSG_DESC_SIZE 32
-#define RIO_MSG_BUFFER_SIZE 4096
-#define RIO_MIN_TX_RING_SIZE 2
-#define RIO_MAX_TX_RING_SIZE 2048
-#define RIO_MIN_RX_RING_SIZE 2
-#define RIO_MAX_RX_RING_SIZE 2048
-
-#define DOORBELL_DMR_DI 0x00000002
-#define DOORBELL_DSR_TE 0x00000080
-#define DOORBELL_DSR_QFI 0x00000010
-#define DOORBELL_DSR_DIQI 0x00000001
-#define DOORBELL_TID_OFFSET 0x02
-#define DOORBELL_SID_OFFSET 0x04
-#define DOORBELL_INFO_OFFSET 0x06
-
-#define DOORBELL_MESSAGE_SIZE 0x08
-#define DBELL_SID(x) (*(u16 *)(x + DOORBELL_SID_OFFSET))
-#define DBELL_TID(x) (*(u16 *)(x + DOORBELL_TID_OFFSET))
-#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET))
-
-struct rio_atmu_regs {
- u32 rowtar;
- u32 rowtear;
- u32 rowbar;
- u32 pad2;
- u32 rowar;
- u32 pad3[3];
-};
-
-struct rio_msg_regs {
- u32 omr; /* 0xD_3000 - Outbound message 0 mode register */
- u32 osr; /* 0xD_3004 - Outbound message 0 status register */
- u32 pad1;
- u32 odqdpar; /* 0xD_300C - Outbound message 0 descriptor queue
- dequeue pointer address register */
- u32 pad2;
- u32 osar; /* 0xD_3014 - Outbound message 0 source address
- register */
- u32 odpr; /* 0xD_3018 - Outbound message 0 destination port
- register */
- u32 odatr; /* 0xD_301C - Outbound message 0 destination attributes
- Register*/
- u32 odcr; /* 0xD_3020 - Outbound message 0 double-word count
- register */
- u32 pad3;
- u32 odqepar; /* 0xD_3028 - Outbound message 0 descriptor queue
- enqueue pointer address register */
- u32 pad4[13];
- u32 imr; /* 0xD_3060 - Inbound message 0 mode register */
- u32 isr; /* 0xD_3064 - Inbound message 0 status register */
- u32 pad5;
- u32 ifqdpar; /* 0xD_306C - Inbound message 0 frame queue dequeue
- pointer address register*/
- u32 pad6;
- u32 ifqepar; /* 0xD_3074 - Inbound message 0 frame queue enqueue
- pointer address register */
- u32 pad7[226];
- u32 odmr; /* 0xD_3400 - Outbound doorbell mode register */
- u32 odsr; /* 0xD_3404 - Outbound doorbell status register */
- u32 res0[4];
- u32 oddpr; /* 0xD_3418 - Outbound doorbell destination port
- register */
- u32 oddatr; /* 0xD_341c - Outbound doorbell destination attributes
- register */
- u32 res1[3];
- u32 odretcr; /* 0xD_342C - Outbound doorbell retry error threshold
- configuration register */
- u32 res2[12];
- u32 dmr; /* 0xD_3460 - Inbound doorbell mode register */
- u32 dsr; /* 0xD_3464 - Inbound doorbell status register */
- u32 pad8;
- u32 dqdpar; /* 0xD_346C - Inbound doorbell queue dequeue Pointer
- address register */
- u32 pad9;
- u32 dqepar; /* 0xD_3474 - Inbound doorbell Queue enqueue pointer
- address register */
- u32 pad10[26];
- u32 pwmr; /* 0xD_34E0 - Inbound port-write mode register */
- u32 pwsr; /* 0xD_34E4 - Inbound port-write status register */
- u32 epwqbar; /* 0xD_34E8 - Extended Port-Write Queue Base Address
- register */
- u32 pwqbar; /* 0xD_34EC - Inbound port-write queue base address
- register */
-};
-
-struct rio_tx_desc {
- u32 res1;
- u32 saddr;
- u32 dport;
- u32 dattr;
- u32 res2;
- u32 res3;
- u32 dwcnt;
- u32 res4;
-};
-
-struct rio_dbell_ring {
- void *virt;
- dma_addr_t phys;
-};
-
-struct rio_msg_tx_ring {
- void *virt;
- dma_addr_t phys;
- void *virt_buffer[RIO_MAX_TX_RING_SIZE];
- dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE];
- int tx_slot;
- int size;
- void *dev_id;
-};
-
-struct rio_msg_rx_ring {
- void *virt;
- dma_addr_t phys;
- void *virt_buffer[RIO_MAX_RX_RING_SIZE];
- int rx_slot;
- int size;
- void *dev_id;
-};
-
-struct rio_port_write_msg {
- void *virt;
- dma_addr_t phys;
- u32 msg_count;
- u32 err_count;
- u32 discard_count;
-};
-
-struct rio_priv {
- struct device *dev;
- void __iomem *regs_win;
- struct rio_atmu_regs __iomem *atmu_regs;
- struct rio_atmu_regs __iomem *maint_atmu_regs;
- struct rio_atmu_regs __iomem *dbell_atmu_regs;
- void __iomem *dbell_win;
- void __iomem *maint_win;
- struct rio_msg_regs __iomem *msg_regs;
- struct rio_dbell_ring dbell_ring;
- struct rio_msg_tx_ring msg_tx_ring;
- struct rio_msg_rx_ring msg_rx_ring;
- struct rio_port_write_msg port_write_msg;
- int bellirq;
- int txirq;
- int rxirq;
- int pwirq;
- struct work_struct pw_work;
- struct kfifo pw_fifo;
- spinlock_t pw_fifo_lock;
-};
#define __fsl_read_rio_config(x, addr, err, op) \
__asm__ __volatile__( \
: "=r" (err), "=r" (x) \
: "b" (addr), "i" (-EFAULT), "0" (err))
-static void __iomem *rio_regs_win;
+void __iomem *rio_regs_win;
#ifdef CONFIG_E500
int fsl_rio_mcheck_exception(struct pt_regs *regs)
EXPORT_SYMBOL_GPL(fsl_rio_mcheck_exception);
#endif
-/**
- * fsl_rio_doorbell_send - Send a MPC85xx doorbell message
- * @mport: RapidIO master port info
- * @index: ID of RapidIO interface
- * @destid: Destination ID of target device
- * @data: 16-bit info field of RapidIO doorbell message
- *
- * Sends a MPC85xx doorbell message. Returns %0 on success or
- * %-EINVAL on failure.
- */
-static int fsl_rio_doorbell_send(struct rio_mport *mport,
- int index, u16 destid, u16 data)
-{
- struct rio_priv *priv = mport->priv;
- pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n",
- index, destid, data);
- switch (mport->phy_type) {
- case RIO_PHY_PARALLEL:
- out_be32(&priv->dbell_atmu_regs->rowtar, destid << 22);
- out_be16(priv->dbell_win, data);
- break;
- case RIO_PHY_SERIAL:
- /* In the serial version silicons, such as MPC8548, MPC8641,
- * below operations is must be.
- */
- out_be32(&priv->msg_regs->odmr, 0x00000000);
- out_be32(&priv->msg_regs->odretcr, 0x00000004);
- out_be32(&priv->msg_regs->oddpr, destid << 16);
- out_be32(&priv->msg_regs->oddatr, data);
- out_be32(&priv->msg_regs->odmr, 0x00000001);
- break;
- }
-
- return 0;
-}
-
/**
* fsl_local_config_read - Generate a MPC85xx local config space read
* @mport: RapidIO master port info
{
struct rio_priv *priv = mport->priv;
pr_debug("fsl_local_config_read: index %d offset %8.8x\n", index,
- offset);
+ offset);
*data = in_be32(priv->regs_win + offset);
return 0;
{
struct rio_priv *priv = mport->priv;
pr_debug
- ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
- index, offset, data);
+ ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
+ index, offset, data);
out_be32(priv->regs_win + offset, data);
return 0;
u32 rval, err = 0;
pr_debug
- ("fsl_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
+ ("fsl_rio_config_read:"
+ " index %d destid %d hopcount %d offset %8.8x len %d\n",
index, destid, hopcount, offset, len);
/* 16MB maintenance window possible */
out_be32(&priv->maint_atmu_regs->rowtar,
(destid << 22) | (hopcount << 12) | (offset >> 12));
- out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
+ out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
switch (len) {
struct rio_priv *priv = mport->priv;
u8 *data;
pr_debug
- ("fsl_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
+ ("fsl_rio_config_write:"
+ "index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
index, destid, hopcount, offset, len, val);
/* 16MB maintenance windows possible */
out_be32(&priv->maint_atmu_regs->rowtar,
(destid << 22) | (hopcount << 12) | (offset >> 12));
- out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
+ out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
switch (len) {
return 0;
}
-/**
- * fsl_add_outb_message - Add message to the MPC85xx outbound message queue
- * @mport: Master port with outbound message queue
- * @rdev: Target of outbound message
- * @mbox: Outbound mailbox
- * @buffer: Message to add to outbound queue
- * @len: Length of message
- *
- * Adds the @buffer message to the MPC85xx outbound message queue. Returns
- * %0 on success or %-EINVAL on failure.
- */
-static int
-fsl_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
- void *buffer, size_t len)
-{
- struct rio_priv *priv = mport->priv;
- u32 omr;
- struct rio_tx_desc *desc = (struct rio_tx_desc *)priv->msg_tx_ring.virt
- + priv->msg_tx_ring.tx_slot;
- int ret = 0;
-
- pr_debug("RIO: fsl_add_outb_message(): destid %4.4x mbox %d buffer " \
- "%8.8x len %8.8x\n", rdev->destid, mbox, (int)buffer, len);
-
- if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
- ret = -EINVAL;
- goto out;
- }
-
- /* Copy and clear rest of buffer */
- memcpy(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot], buffer,
- len);
- if (len < (RIO_MAX_MSG_SIZE - 4))
- memset(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot]
- + len, 0, RIO_MAX_MSG_SIZE - len);
-
- switch (mport->phy_type) {
- case RIO_PHY_PARALLEL:
- /* Set mbox field for message */
- desc->dport = mbox & 0x3;
-
- /* Enable EOMI interrupt, set priority, and set destid */
- desc->dattr = 0x28000000 | (rdev->destid << 2);
- break;
- case RIO_PHY_SERIAL:
- /* Set mbox field for message, and set destid */
- desc->dport = (rdev->destid << 16) | (mbox & 0x3);
-
- /* Enable EOMI interrupt and priority */
- desc->dattr = 0x28000000;
- break;
- }
-
- /* Set transfer size aligned to next power of 2 (in double words) */
- desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
-
- /* Set snooping and source buffer address */
- desc->saddr = 0x00000004
- | priv->msg_tx_ring.phys_buffer[priv->msg_tx_ring.tx_slot];
-
- /* Increment enqueue pointer */
- omr = in_be32(&priv->msg_regs->omr);
- out_be32(&priv->msg_regs->omr, omr | RIO_MSG_OMR_MUI);
-
- /* Go to next descriptor */
- if (++priv->msg_tx_ring.tx_slot == priv->msg_tx_ring.size)
- priv->msg_tx_ring.tx_slot = 0;
-
- out:
- return ret;
-}
-
-/**
- * fsl_rio_tx_handler - MPC85xx outbound message interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles outbound message interrupts. Executes a register outbound
- * mailbox event handler and acks the interrupt occurrence.
- */
-static irqreturn_t
-fsl_rio_tx_handler(int irq, void *dev_instance)
-{
- int osr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
- struct rio_priv *priv = port->priv;
-
- osr = in_be32(&priv->msg_regs->osr);
-
- if (osr & RIO_MSG_OSR_TE) {
- pr_info("RIO: outbound message transmission error\n");
- out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_TE);
- goto out;
- }
-
- if (osr & RIO_MSG_OSR_QOI) {
- pr_info("RIO: outbound message queue overflow\n");
- out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_QOI);
- goto out;
- }
-
- if (osr & RIO_MSG_OSR_EOMI) {
- u32 dqp = in_be32(&priv->msg_regs->odqdpar);
- int slot = (dqp - priv->msg_tx_ring.phys) >> 5;
- port->outb_msg[0].mcback(port, priv->msg_tx_ring.dev_id, -1,
- slot);
-
- /* Ack the end-of-message interrupt */
- out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_EOMI);
- }
-
- out:
- return IRQ_HANDLED;
-}
-
-/**
- * fsl_open_outb_mbox - Initialize MPC85xx outbound mailbox
- * @mport: Master port implementing the outbound message unit
- * @dev_id: Device specific pointer to pass on event
- * @mbox: Mailbox to open
- * @entries: Number of entries in the outbound mailbox ring
- *
- * Initializes buffer ring, request the outbound message interrupt,
- * and enables the outbound message unit. Returns %0 on success and
- * %-EINVAL or %-ENOMEM on failure.
- */
-static int
-fsl_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
-{
- int i, j, rc = 0;
- struct rio_priv *priv = mport->priv;
-
- if ((entries < RIO_MIN_TX_RING_SIZE) ||
- (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
- rc = -EINVAL;
- goto out;
- }
-
- /* Initialize shadow copy ring */
- priv->msg_tx_ring.dev_id = dev_id;
- priv->msg_tx_ring.size = entries;
-
- for (i = 0; i < priv->msg_tx_ring.size; i++) {
- priv->msg_tx_ring.virt_buffer[i] =
- dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
- &priv->msg_tx_ring.phys_buffer[i], GFP_KERNEL);
- if (!priv->msg_tx_ring.virt_buffer[i]) {
- rc = -ENOMEM;
- for (j = 0; j < priv->msg_tx_ring.size; j++)
- if (priv->msg_tx_ring.virt_buffer[j])
- dma_free_coherent(priv->dev,
- RIO_MSG_BUFFER_SIZE,
- priv->msg_tx_ring.
- virt_buffer[j],
- priv->msg_tx_ring.
- phys_buffer[j]);
- goto out;
- }
- }
-
- /* Initialize outbound message descriptor ring */
- priv->msg_tx_ring.virt = dma_alloc_coherent(priv->dev,
- priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
- &priv->msg_tx_ring.phys, GFP_KERNEL);
- if (!priv->msg_tx_ring.virt) {
- rc = -ENOMEM;
- goto out_dma;
- }
- memset(priv->msg_tx_ring.virt, 0,
- priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE);
- priv->msg_tx_ring.tx_slot = 0;
-
- /* Point dequeue/enqueue pointers at first entry in ring */
- out_be32(&priv->msg_regs->odqdpar, priv->msg_tx_ring.phys);
- out_be32(&priv->msg_regs->odqepar, priv->msg_tx_ring.phys);
-
- /* Configure for snooping */
- out_be32(&priv->msg_regs->osar, 0x00000004);
-
- /* Clear interrupt status */
- out_be32(&priv->msg_regs->osr, 0x000000b3);
-
- /* Hook up outbound message handler */
- rc = request_irq(IRQ_RIO_TX(mport), fsl_rio_tx_handler, 0,
- "msg_tx", (void *)mport);
- if (rc < 0)
- goto out_irq;
-
- /*
- * Configure outbound message unit
- * Snooping
- * Interrupts (all enabled, except QEIE)
- * Chaining mode
- * Disable
- */
- out_be32(&priv->msg_regs->omr, 0x00100220);
-
- /* Set number of entries */
- out_be32(&priv->msg_regs->omr,
- in_be32(&priv->msg_regs->omr) |
- ((get_bitmask_order(entries) - 2) << 12));
-
- /* Now enable the unit */
- out_be32(&priv->msg_regs->omr, in_be32(&priv->msg_regs->omr) | 0x1);
-
- out:
- return rc;
-
- out_irq:
- dma_free_coherent(priv->dev,
- priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
- priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
-
- out_dma:
- for (i = 0; i < priv->msg_tx_ring.size; i++)
- dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
- priv->msg_tx_ring.virt_buffer[i],
- priv->msg_tx_ring.phys_buffer[i]);
-
- return rc;
-}
-
-/**
- * fsl_close_outb_mbox - Shut down MPC85xx outbound mailbox
- * @mport: Master port implementing the outbound message unit
- * @mbox: Mailbox to close
- *
- * Disables the outbound message unit, free all buffers, and
- * frees the outbound message interrupt.
- */
-static void fsl_close_outb_mbox(struct rio_mport *mport, int mbox)
-{
- struct rio_priv *priv = mport->priv;
- /* Disable inbound message unit */
- out_be32(&priv->msg_regs->omr, 0);
-
- /* Free ring */
- dma_free_coherent(priv->dev,
- priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
- priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
-
- /* Free interrupt */
- free_irq(IRQ_RIO_TX(mport), (void *)mport);
-}
-
-/**
- * fsl_rio_rx_handler - MPC85xx inbound message interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles inbound message interrupts. Executes a registered inbound
- * mailbox event handler and acks the interrupt occurrence.
- */
-static irqreturn_t
-fsl_rio_rx_handler(int irq, void *dev_instance)
-{
- int isr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
- struct rio_priv *priv = port->priv;
-
- isr = in_be32(&priv->msg_regs->isr);
-
- if (isr & RIO_MSG_ISR_TE) {
- pr_info("RIO: inbound message reception error\n");
- out_be32((void *)&priv->msg_regs->isr, RIO_MSG_ISR_TE);
- goto out;
- }
-
- /* XXX Need to check/dispatch until queue empty */
- if (isr & RIO_MSG_ISR_DIQI) {
- /*
- * We implement *only* mailbox 0, but can receive messages
- * for any mailbox/letter to that mailbox destination. So,
- * make the callback with an unknown/invalid mailbox number
- * argument.
- */
- port->inb_msg[0].mcback(port, priv->msg_rx_ring.dev_id, -1, -1);
-
- /* Ack the queueing interrupt */
- out_be32(&priv->msg_regs->isr, RIO_MSG_ISR_DIQI);
- }
-
- out:
- return IRQ_HANDLED;
-}
-
-/**
- * fsl_open_inb_mbox - Initialize MPC85xx inbound mailbox
- * @mport: Master port implementing the inbound message unit
- * @dev_id: Device specific pointer to pass on event
- * @mbox: Mailbox to open
- * @entries: Number of entries in the inbound mailbox ring
- *
- * Initializes buffer ring, request the inbound message interrupt,
- * and enables the inbound message unit. Returns %0 on success
- * and %-EINVAL or %-ENOMEM on failure.
- */
-static int
-fsl_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
-{
- int i, rc = 0;
- struct rio_priv *priv = mport->priv;
-
- if ((entries < RIO_MIN_RX_RING_SIZE) ||
- (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
- rc = -EINVAL;
- goto out;
- }
-
- /* Initialize client buffer ring */
- priv->msg_rx_ring.dev_id = dev_id;
- priv->msg_rx_ring.size = entries;
- priv->msg_rx_ring.rx_slot = 0;
- for (i = 0; i < priv->msg_rx_ring.size; i++)
- priv->msg_rx_ring.virt_buffer[i] = NULL;
-
- /* Initialize inbound message ring */
- priv->msg_rx_ring.virt = dma_alloc_coherent(priv->dev,
- priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
- &priv->msg_rx_ring.phys, GFP_KERNEL);
- if (!priv->msg_rx_ring.virt) {
- rc = -ENOMEM;
- goto out;
- }
-
- /* Point dequeue/enqueue pointers at first entry in ring */
- out_be32(&priv->msg_regs->ifqdpar, (u32) priv->msg_rx_ring.phys);
- out_be32(&priv->msg_regs->ifqepar, (u32) priv->msg_rx_ring.phys);
-
- /* Clear interrupt status */
- out_be32(&priv->msg_regs->isr, 0x00000091);
-
- /* Hook up inbound message handler */
- rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
- "msg_rx", (void *)mport);
- if (rc < 0) {
- dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
- priv->msg_tx_ring.virt_buffer[i],
- priv->msg_tx_ring.phys_buffer[i]);
- goto out;
- }
-
- /*
- * Configure inbound message unit:
- * Snooping
- * 4KB max message size
- * Unmask all interrupt sources
- * Disable
- */
- out_be32(&priv->msg_regs->imr, 0x001b0060);
-
- /* Set number of queue entries */
- setbits32(&priv->msg_regs->imr, (get_bitmask_order(entries) - 2) << 12);
-
- /* Now enable the unit */
- setbits32(&priv->msg_regs->imr, 0x1);
-
- out:
- return rc;
-}
-
-/**
- * fsl_close_inb_mbox - Shut down MPC85xx inbound mailbox
- * @mport: Master port implementing the inbound message unit
- * @mbox: Mailbox to close
- *
- * Disables the inbound message unit, free all buffers, and
- * frees the inbound message interrupt.
- */
-static void fsl_close_inb_mbox(struct rio_mport *mport, int mbox)
-{
- struct rio_priv *priv = mport->priv;
- /* Disable inbound message unit */
- out_be32(&priv->msg_regs->imr, 0);
-
- /* Free ring */
- dma_free_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
- priv->msg_rx_ring.virt, priv->msg_rx_ring.phys);
-
- /* Free interrupt */
- free_irq(IRQ_RIO_RX(mport), (void *)mport);
-}
-
-/**
- * fsl_add_inb_buffer - Add buffer to the MPC85xx inbound message queue
- * @mport: Master port implementing the inbound message unit
- * @mbox: Inbound mailbox number
- * @buf: Buffer to add to inbound queue
- *
- * Adds the @buf buffer to the MPC85xx inbound message queue. Returns
- * %0 on success or %-EINVAL on failure.
- */
-static int fsl_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
-{
- int rc = 0;
- struct rio_priv *priv = mport->priv;
-
- pr_debug("RIO: fsl_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
- priv->msg_rx_ring.rx_slot);
-
- if (priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot]) {
- printk(KERN_ERR
- "RIO: error adding inbound buffer %d, buffer exists\n",
- priv->msg_rx_ring.rx_slot);
- rc = -EINVAL;
- goto out;
- }
-
- priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot] = buf;
- if (++priv->msg_rx_ring.rx_slot == priv->msg_rx_ring.size)
- priv->msg_rx_ring.rx_slot = 0;
-
- out:
- return rc;
-}
-
-/**
- * fsl_get_inb_message - Fetch inbound message from the MPC85xx message unit
- * @mport: Master port implementing the inbound message unit
- * @mbox: Inbound mailbox number
- *
- * Gets the next available inbound message from the inbound message queue.
- * A pointer to the message is returned on success or NULL on failure.
- */
-static void *fsl_get_inb_message(struct rio_mport *mport, int mbox)
-{
- struct rio_priv *priv = mport->priv;
- u32 phys_buf, virt_buf;
- void *buf = NULL;
- int buf_idx;
-
- phys_buf = in_be32(&priv->msg_regs->ifqdpar);
-
- /* If no more messages, then bail out */
- if (phys_buf == in_be32(&priv->msg_regs->ifqepar))
- goto out2;
-
- virt_buf = (u32) priv->msg_rx_ring.virt + (phys_buf
- - priv->msg_rx_ring.phys);
- buf_idx = (phys_buf - priv->msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
- buf = priv->msg_rx_ring.virt_buffer[buf_idx];
-
- if (!buf) {
- printk(KERN_ERR
- "RIO: inbound message copy failed, no buffers\n");
- goto out1;
- }
-
- /* Copy max message size, caller is expected to allocate that big */
- memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
-
- /* Clear the available buffer */
- priv->msg_rx_ring.virt_buffer[buf_idx] = NULL;
-
- out1:
- setbits32(&priv->msg_regs->imr, RIO_MSG_IMR_MI);
-
- out2:
- return buf;
-}
-
-/**
- * fsl_rio_dbell_handler - MPC85xx doorbell interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles doorbell interrupts. Parses a list of registered
- * doorbell event handlers and executes a matching event handler.
- */
-static irqreturn_t
-fsl_rio_dbell_handler(int irq, void *dev_instance)
-{
- int dsr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
- struct rio_priv *priv = port->priv;
-
- dsr = in_be32(&priv->msg_regs->dsr);
-
- if (dsr & DOORBELL_DSR_TE) {
- pr_info("RIO: doorbell reception error\n");
- out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_TE);
- goto out;
- }
-
- if (dsr & DOORBELL_DSR_QFI) {
- pr_info("RIO: doorbell queue full\n");
- out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_QFI);
- }
-
- /* XXX Need to check/dispatch until queue empty */
- if (dsr & DOORBELL_DSR_DIQI) {
- u32 dmsg =
- (u32) priv->dbell_ring.virt +
- (in_be32(&priv->msg_regs->dqdpar) & 0xfff);
- struct rio_dbell *dbell;
- int found = 0;
-
- pr_debug
- ("RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n",
- DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
-
- list_for_each_entry(dbell, &port->dbells, node) {
- if ((dbell->res->start <= DBELL_INF(dmsg)) &&
- (dbell->res->end >= DBELL_INF(dmsg))) {
- found = 1;
- break;
- }
- }
- if (found) {
- dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg),
- DBELL_INF(dmsg));
- } else {
- pr_debug
- ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n",
- DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
- }
- setbits32(&priv->msg_regs->dmr, DOORBELL_DMR_DI);
- out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_DIQI);
- }
-
- out:
- return IRQ_HANDLED;
-}
-
-/**
- * fsl_rio_doorbell_init - MPC85xx doorbell interface init
- * @mport: Master port implementing the inbound doorbell unit
- *
- * Initializes doorbell unit hardware and inbound DMA buffer
- * ring. Called from fsl_rio_setup(). Returns %0 on success
- * or %-ENOMEM on failure.
- */
-static int fsl_rio_doorbell_init(struct rio_mport *mport)
-{
- struct rio_priv *priv = mport->priv;
- int rc = 0;
-
- /* Map outbound doorbell window immediately after maintenance window */
- priv->dbell_win = ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE,
- RIO_DBELL_WIN_SIZE);
- if (!priv->dbell_win) {
- printk(KERN_ERR
- "RIO: unable to map outbound doorbell window\n");
- rc = -ENOMEM;
- goto out;
- }
-
- /* Initialize inbound doorbells */
- priv->dbell_ring.virt = dma_alloc_coherent(priv->dev, 512 *
- DOORBELL_MESSAGE_SIZE, &priv->dbell_ring.phys, GFP_KERNEL);
- if (!priv->dbell_ring.virt) {
- printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
- rc = -ENOMEM;
- iounmap(priv->dbell_win);
- goto out;
- }
-
- /* Point dequeue/enqueue pointers at first entry in ring */
- out_be32(&priv->msg_regs->dqdpar, (u32) priv->dbell_ring.phys);
- out_be32(&priv->msg_regs->dqepar, (u32) priv->dbell_ring.phys);
-
- /* Clear interrupt status */
- out_be32(&priv->msg_regs->dsr, 0x00000091);
-
- /* Hook up doorbell handler */
- rc = request_irq(IRQ_RIO_BELL(mport), fsl_rio_dbell_handler, 0,
- "dbell_rx", (void *)mport);
- if (rc < 0) {
- iounmap(priv->dbell_win);
- dma_free_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE,
- priv->dbell_ring.virt, priv->dbell_ring.phys);
- printk(KERN_ERR
- "MPC85xx RIO: unable to request inbound doorbell irq");
- goto out;
- }
-
- /* Configure doorbells for snooping, 512 entries, and enable */
- out_be32(&priv->msg_regs->dmr, 0x00108161);
-
- out:
- return rc;
-}
-
-static void port_error_handler(struct rio_mport *port, int offset)
+void fsl_rio_port_error_handler(struct rio_mport *port, int offset)
{
/*XXX: Error recovery is not implemented, we just clear errors */
out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR);
}
}
-
-static void msg_unit_error_handler(struct rio_mport *port)
-{
- struct rio_priv *priv = port->priv;
-
- /*XXX: Error recovery is not implemented, we just clear errors */
- out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
-
- out_be32((u32 *)(rio_regs_win + RIO_IM0SR), IMSR_CLEAR);
- out_be32((u32 *)(rio_regs_win + RIO_IM1SR), IMSR_CLEAR);
- out_be32((u32 *)(rio_regs_win + RIO_OM0SR), OMSR_CLEAR);
- out_be32((u32 *)(rio_regs_win + RIO_OM1SR), OMSR_CLEAR);
-
- out_be32(&priv->msg_regs->odsr, ODSR_CLEAR);
- out_be32(&priv->msg_regs->dsr, IDSR_CLEAR);
-
- out_be32(&priv->msg_regs->pwsr, IPWSR_CLEAR);
-}
-
-/**
- * fsl_rio_port_write_handler - MPC85xx port write interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles port write interrupts. Parses a list of registered
- * port write event handlers and executes a matching event handler.
- */
-static irqreturn_t
-fsl_rio_port_write_handler(int irq, void *dev_instance)
-{
- u32 ipwmr, ipwsr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
- struct rio_priv *priv = port->priv;
- u32 epwisr, tmp;
-
- epwisr = in_be32(priv->regs_win + RIO_EPWISR);
- if (!(epwisr & RIO_EPWISR_PW))
- goto pw_done;
-
- ipwmr = in_be32(&priv->msg_regs->pwmr);
- ipwsr = in_be32(&priv->msg_regs->pwsr);
-
-#ifdef DEBUG_PW
- pr_debug("PW Int->IPWMR: 0x%08x IPWSR: 0x%08x (", ipwmr, ipwsr);
- if (ipwsr & RIO_IPWSR_QF)
- pr_debug(" QF");
- if (ipwsr & RIO_IPWSR_TE)
- pr_debug(" TE");
- if (ipwsr & RIO_IPWSR_QFI)
- pr_debug(" QFI");
- if (ipwsr & RIO_IPWSR_PWD)
- pr_debug(" PWD");
- if (ipwsr & RIO_IPWSR_PWB)
- pr_debug(" PWB");
- pr_debug(" )\n");
-#endif
- /* Schedule deferred processing if PW was received */
- if (ipwsr & RIO_IPWSR_QFI) {
- /* Save PW message (if there is room in FIFO),
- * otherwise discard it.
- */
- if (kfifo_avail(&priv->pw_fifo) >= RIO_PW_MSG_SIZE) {
- priv->port_write_msg.msg_count++;
- kfifo_in(&priv->pw_fifo, priv->port_write_msg.virt,
- RIO_PW_MSG_SIZE);
- } else {
- priv->port_write_msg.discard_count++;
- pr_debug("RIO: ISR Discarded Port-Write Msg(s) (%d)\n",
- priv->port_write_msg.discard_count);
- }
- /* Clear interrupt and issue Clear Queue command. This allows
- * another port-write to be received.
- */
- out_be32(&priv->msg_regs->pwsr, RIO_IPWSR_QFI);
- out_be32(&priv->msg_regs->pwmr, ipwmr | RIO_IPWMR_CQ);
-
- schedule_work(&priv->pw_work);
- }
-
- if ((ipwmr & RIO_IPWMR_EIE) && (ipwsr & RIO_IPWSR_TE)) {
- priv->port_write_msg.err_count++;
- pr_debug("RIO: Port-Write Transaction Err (%d)\n",
- priv->port_write_msg.err_count);
- /* Clear Transaction Error: port-write controller should be
- * disabled when clearing this error
- */
- out_be32(&priv->msg_regs->pwmr, ipwmr & ~RIO_IPWMR_PWE);
- out_be32(&priv->msg_regs->pwsr, RIO_IPWSR_TE);
- out_be32(&priv->msg_regs->pwmr, ipwmr);
- }
-
- if (ipwsr & RIO_IPWSR_PWD) {
- priv->port_write_msg.discard_count++;
- pr_debug("RIO: Port Discarded Port-Write Msg(s) (%d)\n",
- priv->port_write_msg.discard_count);
- out_be32(&priv->msg_regs->pwsr, RIO_IPWSR_PWD);
- }
-
-pw_done:
- if (epwisr & RIO_EPWISR_PINT1) {
- tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
- pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
- port_error_handler(port, 0);
- }
-
- if (epwisr & RIO_EPWISR_PINT2) {
- tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
- pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
- port_error_handler(port, 1);
- }
-
- if (epwisr & RIO_EPWISR_MU) {
- tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
- pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
- msg_unit_error_handler(port);
- }
-
- return IRQ_HANDLED;
-}
-
-static void fsl_pw_dpc(struct work_struct *work)
-{
- struct rio_priv *priv = container_of(work, struct rio_priv, pw_work);
- unsigned long flags;
- u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)];
-
- /*
- * Process port-write messages
- */
- spin_lock_irqsave(&priv->pw_fifo_lock, flags);
- while (kfifo_out(&priv->pw_fifo, (unsigned char *)msg_buffer,
- RIO_PW_MSG_SIZE)) {
- /* Process one message */
- spin_unlock_irqrestore(&priv->pw_fifo_lock, flags);
-#ifdef DEBUG_PW
- {
- u32 i;
- pr_debug("%s : Port-Write Message:", __func__);
- for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); i++) {
- if ((i%4) == 0)
- pr_debug("\n0x%02x: 0x%08x", i*4,
- msg_buffer[i]);
- else
- pr_debug(" 0x%08x", msg_buffer[i]);
- }
- pr_debug("\n");
- }
-#endif
- /* Pass the port-write message to RIO core for processing */
- rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer);
- spin_lock_irqsave(&priv->pw_fifo_lock, flags);
- }
- spin_unlock_irqrestore(&priv->pw_fifo_lock, flags);
-}
-
-/**
- * fsl_rio_pw_enable - enable/disable port-write interface init
- * @mport: Master port implementing the port write unit
- * @enable: 1=enable; 0=disable port-write message handling
- */
-static int fsl_rio_pw_enable(struct rio_mport *mport, int enable)
-{
- struct rio_priv *priv = mport->priv;
- u32 rval;
-
- rval = in_be32(&priv->msg_regs->pwmr);
-
- if (enable)
- rval |= RIO_IPWMR_PWE;
- else
- rval &= ~RIO_IPWMR_PWE;
-
- out_be32(&priv->msg_regs->pwmr, rval);
-
- return 0;
-}
-
-/**
- * fsl_rio_port_write_init - MPC85xx port write interface init
- * @mport: Master port implementing the port write unit
- *
- * Initializes port write unit hardware and DMA buffer
- * ring. Called from fsl_rio_setup(). Returns %0 on success
- * or %-ENOMEM on failure.
- */
-static int fsl_rio_port_write_init(struct rio_mport *mport)
-{
- struct rio_priv *priv = mport->priv;
- int rc = 0;
-
- /* Following configurations require a disabled port write controller */
- out_be32(&priv->msg_regs->pwmr,
- in_be32(&priv->msg_regs->pwmr) & ~RIO_IPWMR_PWE);
-
- /* Initialize port write */
- priv->port_write_msg.virt = dma_alloc_coherent(priv->dev,
- RIO_PW_MSG_SIZE,
- &priv->port_write_msg.phys, GFP_KERNEL);
- if (!priv->port_write_msg.virt) {
- pr_err("RIO: unable allocate port write queue\n");
- return -ENOMEM;
- }
-
- priv->port_write_msg.err_count = 0;
- priv->port_write_msg.discard_count = 0;
-
- /* Point dequeue/enqueue pointers at first entry */
- out_be32(&priv->msg_regs->epwqbar, 0);
- out_be32(&priv->msg_regs->pwqbar, (u32) priv->port_write_msg.phys);
-
- pr_debug("EIPWQBAR: 0x%08x IPWQBAR: 0x%08x\n",
- in_be32(&priv->msg_regs->epwqbar),
- in_be32(&priv->msg_regs->pwqbar));
-
- /* Clear interrupt status IPWSR */
- out_be32(&priv->msg_regs->pwsr,
- (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD));
-
- /* Configure port write contoller for snooping enable all reporting,
- clear queue full */
- out_be32(&priv->msg_regs->pwmr,
- RIO_IPWMR_SEN | RIO_IPWMR_QFIE | RIO_IPWMR_EIE | RIO_IPWMR_CQ);
-
-
- /* Hook up port-write handler */
- rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler,
- IRQF_SHARED, "port-write", (void *)mport);
- if (rc < 0) {
- pr_err("MPC85xx RIO: unable to request inbound doorbell irq");
- goto err_out;
- }
- /* Enable Error Interrupt */
- out_be32((u32 *)(rio_regs_win + RIO_LTLEECSR), LTLEECSR_ENABLE_ALL);
-
- INIT_WORK(&priv->pw_work, fsl_pw_dpc);
- spin_lock_init(&priv->pw_fifo_lock);
- if (kfifo_alloc(&priv->pw_fifo, RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
- pr_err("FIFO allocation failed\n");
- rc = -ENOMEM;
- goto err_out_irq;
- }
-
- pr_debug("IPWMR: 0x%08x IPWSR: 0x%08x\n",
- in_be32(&priv->msg_regs->pwmr),
- in_be32(&priv->msg_regs->pwsr));
-
- return rc;
-
-err_out_irq:
- free_irq(IRQ_RIO_PW(mport), (void *)mport);
-err_out:
- dma_free_coherent(priv->dev, RIO_PW_MSG_SIZE,
- priv->port_write_msg.virt,
- priv->port_write_msg.phys);
- return rc;
-}
-
static inline void fsl_rio_info(struct device *dev, u32 ccsr)
{
const char *str;
dev->dev.of_node->full_name);
return -EFAULT;
}
- dev_info(&dev->dev, "Of-device full name %s\n", dev->dev.of_node->full_name);
+ dev_info(&dev->dev, "Of-device full name %s\n",
+ dev->dev.of_node->full_name);
dev_info(&dev->dev, "Regs: %pR\n", ®s);
dt_range = of_get_property(dev->dev.of_node, "ranges", &rlen);
ops->lcwrite = fsl_local_config_write;
ops->cread = fsl_rio_config_read;
ops->cwrite = fsl_rio_config_write;
- ops->dsend = fsl_rio_doorbell_send;
ops->pwenable = fsl_rio_pw_enable;
- ops->open_outb_mbox = fsl_open_outb_mbox;
- ops->open_inb_mbox = fsl_open_inb_mbox;
- ops->close_outb_mbox = fsl_close_outb_mbox;
- ops->close_inb_mbox = fsl_close_inb_mbox;
- ops->add_outb_message = fsl_add_outb_message;
- ops->add_inb_buffer = fsl_add_inb_buffer;
- ops->get_inb_message = fsl_get_inb_message;
port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
if (!port) {
goto err_res;
}
- priv->pwirq = irq_of_parse_and_map(dev->dev.of_node, 0);
- priv->bellirq = irq_of_parse_and_map(dev->dev.of_node, 2);
- priv->txirq = irq_of_parse_and_map(dev->dev.of_node, 3);
- priv->rxirq = irq_of_parse_and_map(dev->dev.of_node, 4);
- dev_info(&dev->dev, "pwirq: %d, bellirq: %d, txirq: %d, rxirq %d\n",
- priv->pwirq, priv->bellirq, priv->txirq, priv->rxirq);
-
- rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
- rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
- rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
+ priv->pwirq = irq_of_parse_and_map(dev->dev.of_node, 0);
+ dev_info(&dev->dev, "pwirq: %d\n", priv->pwirq);
strcpy(port->name, "RIO0 mport");
priv->dev = &dev->dev;
/* Checking the port training status */
if (in_be32((priv->regs_win + RIO_ESCSR)) & 1) {
dev_err(&dev->dev, "Port is not ready. "
- "Try to restart connection...\n");
+ "Try to restart connection...\n");
switch (port->phy_type) {
case RIO_PHY_SERIAL:
/* Disable ports */
priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
+ RIO_ATMU_REGS_OFFSET);
priv->maint_atmu_regs = priv->atmu_regs + 1;
- priv->dbell_atmu_regs = priv->atmu_regs + 2;
- priv->msg_regs = (struct rio_msg_regs *)(priv->regs_win +
- ((port->phy_type == RIO_PHY_SERIAL) ?
- RIO_S_MSG_REGS_OFFSET : RIO_P_MSG_REGS_OFFSET));
/* Set to receive any dist ID for serial RapidIO controller. */
if (port->phy_type == RIO_PHY_SERIAL)
priv->maint_win = ioremap(law_start, RIO_MAINT_WIN_SIZE);
- /* Configure outbound doorbell window */
- out_be32(&priv->dbell_atmu_regs->rowbar,
- (law_start + RIO_MAINT_WIN_SIZE) >> 12);
- out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b); /* 4k */
- fsl_rio_doorbell_init(port);
+ fsl_rio_setup_rmu(port, dev->dev.of_node);
+
fsl_rio_port_write_init(port);
return 0;
--- /dev/null
+/*
+ * Freescale MPC85xx/MPC86xx RapidIO RMU support
+ *
+ * Copyright 2009 Sysgo AG
+ * Thomas Moll <thomas.moll@sysgo.com>
+ * - fixed maintenance access routines, check for aligned access
+ *
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ * - Added Port-Write message handling
+ * - Added Machine Check exception handling
+ *
+ * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
+ * Zhang Wei <wei.zhang@freescale.com>
+ * Lian Minghuan-B31939 <Minghuan.Lian@freescale.com>
+ * Liu Gang <Gang.Liu@freescale.com>
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+
+#include "fsl_rio.h"
+
+#define GET_RMM_HANDLE(mport) \
+ (((struct rio_priv *)(mport->priv))->rmm_handle)
+
+/* RapidIO definition irq, which read from OF-tree */
+#define IRQ_RIO_PW(m) (((struct rio_priv *)(m->priv))->pwirq)
+#define IRQ_RIO_BELL(m) (((struct fsl_rmu *)(GET_RMM_HANDLE(m)))->bellirq)
+#define IRQ_RIO_TX(m) (((struct fsl_rmu *)(GET_RMM_HANDLE(m)))->txirq)
+#define IRQ_RIO_RX(m) (((struct fsl_rmu *)(GET_RMM_HANDLE(m)))->rxirq)
+
+#define RIO_MIN_TX_RING_SIZE 2
+#define RIO_MAX_TX_RING_SIZE 2048
+#define RIO_MIN_RX_RING_SIZE 2
+#define RIO_MAX_RX_RING_SIZE 2048
+
+#define RIO_IPWMR_SEN 0x00100000
+#define RIO_IPWMR_QFIE 0x00000100
+#define RIO_IPWMR_EIE 0x00000020
+#define RIO_IPWMR_CQ 0x00000002
+#define RIO_IPWMR_PWE 0x00000001
+
+#define RIO_IPWSR_QF 0x00100000
+#define RIO_IPWSR_TE 0x00000080
+#define RIO_IPWSR_QFI 0x00000010
+#define RIO_IPWSR_PWD 0x00000008
+#define RIO_IPWSR_PWB 0x00000004
+
+#define RIO_EPWISR 0x10010
+/* EPWISR Error match value */
+#define RIO_EPWISR_PINT1 0x80000000
+#define RIO_EPWISR_PINT2 0x40000000
+#define RIO_EPWISR_MU 0x00000002
+#define RIO_EPWISR_PW 0x00000001
+
+#define IPWSR_CLEAR 0x98
+#define OMSR_CLEAR 0x1cb3
+#define IMSR_CLEAR 0x491
+#define IDSR_CLEAR 0x91
+#define ODSR_CLEAR 0x1c00
+#define LTLEECSR_ENABLE_ALL 0xFFC000FC
+#define RIO_LTLEECSR 0x060c
+
+#define RIO_IM0SR 0x13064
+#define RIO_IM1SR 0x13164
+#define RIO_OM0SR 0x13004
+#define RIO_OM1SR 0x13104
+
+#define RIO_P_MSG_REGS_OFFSET 0x11000
+#define RIO_S_MSG_REGS_OFFSET 0x13000
+
+#define RIO_DBELL_WIN_SIZE 0x1000
+
+#define RIO_MSG_OMR_MUI 0x00000002
+#define RIO_MSG_OSR_TE 0x00000080
+#define RIO_MSG_OSR_QOI 0x00000020
+#define RIO_MSG_OSR_QFI 0x00000010
+#define RIO_MSG_OSR_MUB 0x00000004
+#define RIO_MSG_OSR_EOMI 0x00000002
+#define RIO_MSG_OSR_QEI 0x00000001
+
+#define RIO_MSG_IMR_MI 0x00000002
+#define RIO_MSG_ISR_TE 0x00000080
+#define RIO_MSG_ISR_QFI 0x00000010
+#define RIO_MSG_ISR_DIQI 0x00000001
+
+#define RIO_MSG_DESC_SIZE 32
+#define RIO_MSG_BUFFER_SIZE 4096
+
+#define DOORBELL_DMR_DI 0x00000002
+#define DOORBELL_DSR_TE 0x00000080
+#define DOORBELL_DSR_QFI 0x00000010
+#define DOORBELL_DSR_DIQI 0x00000001
+#define DOORBELL_TID_OFFSET 0x02
+#define DOORBELL_SID_OFFSET 0x04
+#define DOORBELL_INFO_OFFSET 0x06
+
+#define DOORBELL_MESSAGE_SIZE 0x08
+#define DBELL_SID(x) (*(u16 *)(x + DOORBELL_SID_OFFSET))
+#define DBELL_TID(x) (*(u16 *)(x + DOORBELL_TID_OFFSET))
+#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET))
+
+struct rio_msg_regs {
+ u32 omr; /* 0xD_3000 - Outbound message 0 mode register */
+ u32 osr; /* 0xD_3004 - Outbound message 0 status register */
+ u32 pad1;
+ u32 odqdpar; /* 0xD_300C - Outbound message 0 descriptor queue
+ dequeue pointer address register */
+ u32 pad2;
+ u32 osar; /* 0xD_3014 - Outbound message 0 source address
+ register */
+ u32 odpr; /* 0xD_3018 - Outbound message 0 destination port
+ register */
+ u32 odatr; /* 0xD_301C - Outbound message 0 destination attributes
+ Register*/
+ u32 odcr; /* 0xD_3020 - Outbound message 0 double-word count
+ register */
+ u32 pad3;
+ u32 odqepar; /* 0xD_3028 - Outbound message 0 descriptor queue
+ enqueue pointer address register */
+ u32 pad4[13];
+ u32 imr; /* 0xD_3060 - Inbound message 0 mode register */
+ u32 isr; /* 0xD_3064 - Inbound message 0 status register */
+ u32 pad5;
+ u32 ifqdpar; /* 0xD_306C - Inbound message 0 frame queue dequeue
+ pointer address register*/
+ u32 pad6;
+ u32 ifqepar; /* 0xD_3074 - Inbound message 0 frame queue enqueue
+ pointer address register */
+ u32 pad7[226];
+ u32 odmr; /* 0xD_3400 - Outbound doorbell mode register */
+ u32 odsr; /* 0xD_3404 - Outbound doorbell status register */
+ u32 res0[4];
+ u32 oddpr; /* 0xD_3418 - Outbound doorbell destination port
+ register */
+ u32 oddatr; /* 0xD_341c - Outbound doorbell destination attributes
+ register */
+ u32 res1[3];
+ u32 odretcr; /* 0xD_342C - Outbound doorbell retry error threshold
+ configuration register */
+ u32 res2[12];
+ u32 dmr; /* 0xD_3460 - Inbound doorbell mode register */
+ u32 dsr; /* 0xD_3464 - Inbound doorbell status register */
+ u32 pad8;
+ u32 dqdpar; /* 0xD_346C - Inbound doorbell queue dequeue Pointer
+ address register */
+ u32 pad9;
+ u32 dqepar; /* 0xD_3474 - Inbound doorbell Queue enqueue pointer
+ address register */
+ u32 pad10[26];
+ u32 pwmr; /* 0xD_34E0 - Inbound port-write mode register */
+ u32 pwsr; /* 0xD_34E4 - Inbound port-write status register */
+ u32 epwqbar; /* 0xD_34E8 - Extended Port-Write Queue Base Address
+ register */
+ u32 pwqbar; /* 0xD_34EC - Inbound port-write queue base address
+ register */
+};
+
+struct rio_tx_desc {
+ u32 res1;
+ u32 saddr;
+ u32 dport;
+ u32 dattr;
+ u32 res2;
+ u32 res3;
+ u32 dwcnt;
+ u32 res4;
+};
+
+struct rio_dbell_ring {
+ void *virt;
+ dma_addr_t phys;
+};
+
+struct rio_msg_tx_ring {
+ void *virt;
+ dma_addr_t phys;
+ void *virt_buffer[RIO_MAX_TX_RING_SIZE];
+ dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE];
+ int tx_slot;
+ int size;
+ void *dev_id;
+};
+
+struct rio_msg_rx_ring {
+ void *virt;
+ dma_addr_t phys;
+ void *virt_buffer[RIO_MAX_RX_RING_SIZE];
+ int rx_slot;
+ int size;
+ void *dev_id;
+};
+
+struct fsl_rmu {
+ struct rio_atmu_regs __iomem *dbell_atmu_regs;
+ void __iomem *dbell_win;
+ struct rio_msg_regs __iomem *msg_regs;
+ struct rio_dbell_ring dbell_ring;
+ struct rio_msg_tx_ring msg_tx_ring;
+ struct rio_msg_rx_ring msg_rx_ring;
+ int bellirq;
+ int txirq;
+ int rxirq;
+};
+
+/**
+ * fsl_rio_tx_handler - MPC85xx outbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles outbound message interrupts. Executes a register outbound
+ * mailbox event handler and acks the interrupt occurrence.
+ */
+static irqreturn_t
+fsl_rio_tx_handler(int irq, void *dev_instance)
+{
+ int osr;
+ struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(port);
+
+ osr = in_be32(&rmu->msg_regs->osr);
+
+ if (osr & RIO_MSG_OSR_TE) {
+ pr_info("RIO: outbound message transmission error\n");
+ out_be32(&rmu->msg_regs->osr, RIO_MSG_OSR_TE);
+ goto out;
+ }
+
+ if (osr & RIO_MSG_OSR_QOI) {
+ pr_info("RIO: outbound message queue overflow\n");
+ out_be32(&rmu->msg_regs->osr, RIO_MSG_OSR_QOI);
+ goto out;
+ }
+
+ if (osr & RIO_MSG_OSR_EOMI) {
+ u32 dqp = in_be32(&rmu->msg_regs->odqdpar);
+ int slot = (dqp - rmu->msg_tx_ring.phys) >> 5;
+ port->outb_msg[0].mcback(port, rmu->msg_tx_ring.dev_id, -1,
+ slot);
+
+ /* Ack the end-of-message interrupt */
+ out_be32(&rmu->msg_regs->osr, RIO_MSG_OSR_EOMI);
+ }
+
+out:
+ return IRQ_HANDLED;
+}
+
+/**
+ * fsl_rio_rx_handler - MPC85xx inbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles inbound message interrupts. Executes a registered inbound
+ * mailbox event handler and acks the interrupt occurrence.
+ */
+static irqreturn_t
+fsl_rio_rx_handler(int irq, void *dev_instance)
+{
+ int isr;
+ struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(port);
+
+ isr = in_be32(&rmu->msg_regs->isr);
+
+ if (isr & RIO_MSG_ISR_TE) {
+ pr_info("RIO: inbound message reception error\n");
+ out_be32((void *)&rmu->msg_regs->isr, RIO_MSG_ISR_TE);
+ goto out;
+ }
+
+ /* XXX Need to check/dispatch until queue empty */
+ if (isr & RIO_MSG_ISR_DIQI) {
+ /*
+ * We implement *only* mailbox 0, but can receive messages
+ * for any mailbox/letter to that mailbox destination. So,
+ * make the callback with an unknown/invalid mailbox number
+ * argument.
+ */
+ port->inb_msg[0].mcback(port, rmu->msg_rx_ring.dev_id, -1, -1);
+
+ /* Ack the queueing interrupt */
+ out_be32(&rmu->msg_regs->isr, RIO_MSG_ISR_DIQI);
+ }
+
+out:
+ return IRQ_HANDLED;
+}
+
+/**
+ * fsl_rio_dbell_handler - MPC85xx doorbell interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles doorbell interrupts. Parses a list of registered
+ * doorbell event handlers and executes a matching event handler.
+ */
+static irqreturn_t
+fsl_rio_dbell_handler(int irq, void *dev_instance)
+{
+ int dsr;
+ struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(port);
+
+ dsr = in_be32(&rmu->msg_regs->dsr);
+
+ if (dsr & DOORBELL_DSR_TE) {
+ pr_info("RIO: doorbell reception error\n");
+ out_be32(&rmu->msg_regs->dsr, DOORBELL_DSR_TE);
+ goto out;
+ }
+
+ if (dsr & DOORBELL_DSR_QFI) {
+ pr_info("RIO: doorbell queue full\n");
+ out_be32(&rmu->msg_regs->dsr, DOORBELL_DSR_QFI);
+ }
+
+ /* XXX Need to check/dispatch until queue empty */
+ if (dsr & DOORBELL_DSR_DIQI) {
+ u32 dmsg =
+ (u32) rmu->dbell_ring.virt +
+ (in_be32(&rmu->msg_regs->dqdpar) & 0xfff);
+ struct rio_dbell *dbell;
+ int found = 0;
+
+ pr_debug
+ ("RIO: processing doorbell,"
+ " sid %2.2x tid %2.2x info %4.4x\n",
+ DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
+
+ list_for_each_entry(dbell, &port->dbells, node) {
+ if ((dbell->res->start <= DBELL_INF(dmsg)) &&
+ (dbell->res->end >= DBELL_INF(dmsg))) {
+ found = 1;
+ break;
+ }
+ }
+ if (found) {
+ dbell->dinb(port, dbell->dev_id,
+ DBELL_SID(dmsg),
+ DBELL_TID(dmsg), DBELL_INF(dmsg));
+ } else {
+ pr_debug
+ ("RIO: spurious doorbell,"
+ " sid %2.2x tid %2.2x info %4.4x\n",
+ DBELL_SID(dmsg), DBELL_TID(dmsg),
+ DBELL_INF(dmsg));
+ }
+ setbits32(&rmu->msg_regs->dmr, DOORBELL_DMR_DI);
+ out_be32(&rmu->msg_regs->dsr, DOORBELL_DSR_DIQI);
+ }
+
+out:
+ return IRQ_HANDLED;
+}
+
+void msg_unit_error_handler(struct rio_mport *port)
+{
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(port);
+
+ /*XXX: Error recovery is not implemented, we just clear errors */
+ out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
+
+ out_be32((u32 *)(rio_regs_win + RIO_IM0SR), IMSR_CLEAR);
+ out_be32((u32 *)(rio_regs_win + RIO_IM1SR), IMSR_CLEAR);
+ out_be32((u32 *)(rio_regs_win + RIO_OM0SR), OMSR_CLEAR);
+ out_be32((u32 *)(rio_regs_win + RIO_OM1SR), OMSR_CLEAR);
+
+ out_be32(&rmu->msg_regs->odsr, ODSR_CLEAR);
+ out_be32(&rmu->msg_regs->dsr, IDSR_CLEAR);
+
+ out_be32(&rmu->msg_regs->pwsr, IPWSR_CLEAR);
+}
+
+/**
+ * fsl_rio_port_write_handler - MPC85xx port write interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles port write interrupts. Parses a list of registered
+ * port write event handlers and executes a matching event handler.
+ */
+static irqreturn_t
+fsl_rio_port_write_handler(int irq, void *dev_instance)
+{
+ u32 ipwmr, ipwsr;
+ struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct rio_priv *priv = port->priv;
+ struct fsl_rmu *rmu;
+ u32 epwisr, tmp;
+
+ rmu = GET_RMM_HANDLE(port);
+ epwisr = in_be32(priv->regs_win + RIO_EPWISR);
+ if (!(epwisr & RIO_EPWISR_PW))
+ goto pw_done;
+
+ ipwmr = in_be32(&rmu->msg_regs->pwmr);
+ ipwsr = in_be32(&rmu->msg_regs->pwsr);
+
+#ifdef DEBUG_PW
+ pr_debug("PW Int->IPWMR: 0x%08x IPWSR: 0x%08x (", ipwmr, ipwsr);
+ if (ipwsr & RIO_IPWSR_QF)
+ pr_debug(" QF");
+ if (ipwsr & RIO_IPWSR_TE)
+ pr_debug(" TE");
+ if (ipwsr & RIO_IPWSR_QFI)
+ pr_debug(" QFI");
+ if (ipwsr & RIO_IPWSR_PWD)
+ pr_debug(" PWD");
+ if (ipwsr & RIO_IPWSR_PWB)
+ pr_debug(" PWB");
+ pr_debug(" )\n");
+#endif
+ /* Schedule deferred processing if PW was received */
+ if (ipwsr & RIO_IPWSR_QFI) {
+ /* Save PW message (if there is room in FIFO),
+ * otherwise discard it.
+ */
+ if (kfifo_avail(&priv->pw_fifo) >= RIO_PW_MSG_SIZE) {
+ priv->port_write_msg.msg_count++;
+ kfifo_in(&priv->pw_fifo, priv->port_write_msg.virt,
+ RIO_PW_MSG_SIZE);
+ } else {
+ priv->port_write_msg.discard_count++;
+ pr_debug("RIO: ISR Discarded Port-Write Msg(s) (%d)\n",
+ priv->port_write_msg.discard_count);
+ }
+ /* Clear interrupt and issue Clear Queue command. This allows
+ * another port-write to be received.
+ */
+ out_be32(&rmu->msg_regs->pwsr, RIO_IPWSR_QFI);
+ out_be32(&rmu->msg_regs->pwmr, ipwmr | RIO_IPWMR_CQ);
+
+ schedule_work(&priv->pw_work);
+ }
+
+ if ((ipwmr & RIO_IPWMR_EIE) && (ipwsr & RIO_IPWSR_TE)) {
+ priv->port_write_msg.err_count++;
+ pr_debug("RIO: Port-Write Transaction Err (%d)\n",
+ priv->port_write_msg.err_count);
+ /* Clear Transaction Error: port-write controller should be
+ * disabled when clearing this error
+ */
+ out_be32(&rmu->msg_regs->pwmr, ipwmr & ~RIO_IPWMR_PWE);
+ out_be32(&rmu->msg_regs->pwsr, RIO_IPWSR_TE);
+ out_be32(&rmu->msg_regs->pwmr, ipwmr);
+ }
+
+ if (ipwsr & RIO_IPWSR_PWD) {
+ priv->port_write_msg.discard_count++;
+ pr_debug("RIO: Port Discarded Port-Write Msg(s) (%d)\n",
+ priv->port_write_msg.discard_count);
+ out_be32(&rmu->msg_regs->pwsr, RIO_IPWSR_PWD);
+ }
+
+pw_done:
+ if (epwisr & RIO_EPWISR_PINT1) {
+ tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
+ pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
+ fsl_rio_port_error_handler(port, 0);
+ }
+
+ if (epwisr & RIO_EPWISR_PINT2) {
+ tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
+ pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
+ fsl_rio_port_error_handler(port, 1);
+ }
+
+ if (epwisr & RIO_EPWISR_MU) {
+ tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
+ pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
+ msg_unit_error_handler(port);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void fsl_pw_dpc(struct work_struct *work)
+{
+ struct rio_priv *priv = container_of(work, struct rio_priv, pw_work);
+ unsigned long flags;
+ u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)];
+
+ /*
+ * Process port-write messages
+ */
+ spin_lock_irqsave(&priv->pw_fifo_lock, flags);
+ while (kfifo_out(&priv->pw_fifo, (unsigned char *)msg_buffer,
+ RIO_PW_MSG_SIZE)) {
+ /* Process one message */
+ spin_unlock_irqrestore(&priv->pw_fifo_lock, flags);
+#ifdef DEBUG_PW
+ {
+ u32 i;
+ pr_debug("%s : Port-Write Message:", __func__);
+ for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); i++) {
+ if ((i%4) == 0)
+ pr_debug("\n0x%02x: 0x%08x", i*4,
+ msg_buffer[i]);
+ else
+ pr_debug(" 0x%08x", msg_buffer[i]);
+ }
+ pr_debug("\n");
+ }
+#endif
+ /* Pass the port-write message to RIO core for processing */
+ rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer);
+ spin_lock_irqsave(&priv->pw_fifo_lock, flags);
+ }
+ spin_unlock_irqrestore(&priv->pw_fifo_lock, flags);
+}
+
+/**
+ * fsl_rio_pw_enable - enable/disable port-write interface init
+ * @mport: Master port implementing the port write unit
+ * @enable: 1=enable; 0=disable port-write message handling
+ */
+int fsl_rio_pw_enable(struct rio_mport *mport, int enable)
+{
+ struct fsl_rmu *rmu;
+ u32 rval;
+
+ rmu = GET_RMM_HANDLE(mport);
+
+ rval = in_be32(&rmu->msg_regs->pwmr);
+
+ if (enable)
+ rval |= RIO_IPWMR_PWE;
+ else
+ rval &= ~RIO_IPWMR_PWE;
+
+ out_be32(&rmu->msg_regs->pwmr, rval);
+
+ return 0;
+}
+
+/**
+ * fsl_rio_port_write_init - MPC85xx port write interface init
+ * @mport: Master port implementing the port write unit
+ *
+ * Initializes port write unit hardware and DMA buffer
+ * ring. Called from fsl_rio_setup(). Returns %0 on success
+ * or %-ENOMEM on failure.
+ */
+
+int fsl_rio_port_write_init(struct rio_mport *mport)
+{
+ struct rio_priv *priv = mport->priv;
+ struct fsl_rmu *rmu;
+ int rc = 0;
+
+ rmu = GET_RMM_HANDLE(mport);
+
+ /* Following configurations require a disabled port write controller */
+ out_be32(&rmu->msg_regs->pwmr,
+ in_be32(&rmu->msg_regs->pwmr) & ~RIO_IPWMR_PWE);
+
+ /* Initialize port write */
+ priv->port_write_msg.virt = dma_alloc_coherent(priv->dev,
+ RIO_PW_MSG_SIZE,
+ &priv->port_write_msg.phys, GFP_KERNEL);
+ if (!priv->port_write_msg.virt) {
+ pr_err("RIO: unable allocate port write queue\n");
+ return -ENOMEM;
+ }
+
+ priv->port_write_msg.err_count = 0;
+ priv->port_write_msg.discard_count = 0;
+
+ /* Point dequeue/enqueue pointers at first entry */
+ out_be32(&rmu->msg_regs->epwqbar, 0);
+ out_be32(&rmu->msg_regs->pwqbar, (u32) priv->port_write_msg.phys);
+
+ pr_debug("EIPWQBAR: 0x%08x IPWQBAR: 0x%08x\n",
+ in_be32(&rmu->msg_regs->epwqbar),
+ in_be32(&rmu->msg_regs->pwqbar));
+
+ /* Clear interrupt status IPWSR */
+ out_be32(&rmu->msg_regs->pwsr,
+ (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD));
+
+ /* Configure port write contoller for snooping enable all reporting,
+ clear queue full */
+ out_be32(&rmu->msg_regs->pwmr,
+ RIO_IPWMR_SEN | RIO_IPWMR_QFIE | RIO_IPWMR_EIE | RIO_IPWMR_CQ);
+
+
+ /* Hook up port-write handler */
+ rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler,
+ IRQF_SHARED, "port-write", (void *)mport);
+ if (rc < 0) {
+ pr_err("MPC85xx RIO: unable to request inbound doorbell irq");
+ goto err_out;
+ }
+ /* Enable Error Interrupt */
+ out_be32((u32 *)(rio_regs_win + RIO_LTLEECSR), LTLEECSR_ENABLE_ALL);
+
+ INIT_WORK(&priv->pw_work, fsl_pw_dpc);
+ spin_lock_init(&priv->pw_fifo_lock);
+ if (kfifo_alloc(&priv->pw_fifo, RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
+ pr_err("FIFO allocation failed\n");
+ rc = -ENOMEM;
+ goto err_out_irq;
+ }
+
+ pr_debug("IPWMR: 0x%08x IPWSR: 0x%08x\n",
+ in_be32(&rmu->msg_regs->pwmr),
+ in_be32(&rmu->msg_regs->pwsr));
+
+ return rc;
+
+err_out_irq:
+ free_irq(IRQ_RIO_PW(mport), (void *)mport);
+err_out:
+ dma_free_coherent(priv->dev, RIO_PW_MSG_SIZE,
+ priv->port_write_msg.virt,
+ priv->port_write_msg.phys);
+ return rc;
+}
+
+/**
+ * fsl_rio_doorbell_send - Send a MPC85xx doorbell message
+ * @mport: RapidIO master port info
+ * @index: ID of RapidIO interface
+ * @destid: Destination ID of target device
+ * @data: 16-bit info field of RapidIO doorbell message
+ *
+ * Sends a MPC85xx doorbell message. Returns %0 on success or
+ * %-EINVAL on failure.
+ */
+static int fsl_rio_doorbell_send(struct rio_mport *mport,
+ int index, u16 destid, u16 data)
+{
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n",
+ index, destid, data);
+ switch (mport->phy_type) {
+ case RIO_PHY_PARALLEL:
+ out_be32(&rmu->dbell_atmu_regs->rowtar, destid << 22);
+ out_be16(rmu->dbell_win, data);
+ break;
+ case RIO_PHY_SERIAL:
+ /* In the serial version silicons, such as MPC8548, MPC8641,
+ * below operations is must be.
+ */
+ out_be32(&rmu->msg_regs->odmr, 0x00000000);
+ out_be32(&rmu->msg_regs->odretcr, 0x00000004);
+ out_be32(&rmu->msg_regs->oddpr, destid << 16);
+ out_be32(&rmu->msg_regs->oddatr, data);
+ out_be32(&rmu->msg_regs->odmr, 0x00000001);
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * fsl_add_outb_message - Add message to the MPC85xx outbound message queue
+ * @mport: Master port with outbound message queue
+ * @rdev: Target of outbound message
+ * @mbox: Outbound mailbox
+ * @buffer: Message to add to outbound queue
+ * @len: Length of message
+ *
+ * Adds the @buffer message to the MPC85xx outbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+static int
+fsl_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
+ void *buffer, size_t len)
+{
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+ u32 omr;
+ struct rio_tx_desc *desc = (struct rio_tx_desc *)rmu->msg_tx_ring.virt
+ + rmu->msg_tx_ring.tx_slot;
+ int ret = 0;
+
+ pr_debug("RIO: fsl_add_outb_message(): destid %4.4x mbox %d buffer " \
+ "%8.8x len %8.8x\n", rdev->destid, mbox, (int)buffer, len);
+
+ if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* Copy and clear rest of buffer */
+ memcpy(rmu->msg_tx_ring.virt_buffer[rmu->msg_tx_ring.tx_slot], buffer,
+ len);
+ if (len < (RIO_MAX_MSG_SIZE - 4))
+ memset(rmu->msg_tx_ring.virt_buffer[rmu->msg_tx_ring.tx_slot]
+ + len, 0, RIO_MAX_MSG_SIZE - len);
+
+ switch (mport->phy_type) {
+ case RIO_PHY_PARALLEL:
+ /* Set mbox field for message */
+ desc->dport = mbox & 0x3;
+
+ /* Enable EOMI interrupt, set priority, and set destid */
+ desc->dattr = 0x28000000 | (rdev->destid << 2);
+ break;
+ case RIO_PHY_SERIAL:
+ /* Set mbox field for message, and set destid */
+ desc->dport = (rdev->destid << 16) | (mbox & 0x3);
+
+ /* Enable EOMI interrupt and priority */
+ desc->dattr = 0x28000000;
+ break;
+ }
+
+ /* Set transfer size aligned to next power of 2 (in double words) */
+ desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
+
+ /* Set snooping and source buffer address */
+ desc->saddr = 0x00000004
+ | rmu->msg_tx_ring.phys_buffer[rmu->msg_tx_ring.tx_slot];
+
+ /* Increment enqueue pointer */
+ omr = in_be32(&rmu->msg_regs->omr);
+ out_be32(&rmu->msg_regs->omr, omr | RIO_MSG_OMR_MUI);
+
+ /* Go to next descriptor */
+ if (++rmu->msg_tx_ring.tx_slot == rmu->msg_tx_ring.size)
+ rmu->msg_tx_ring.tx_slot = 0;
+
+out:
+ return ret;
+}
+
+/**
+ * fsl_open_outb_mbox - Initialize MPC85xx outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the outbound mailbox ring
+ *
+ * Initializes buffer ring, request the outbound message interrupt,
+ * and enables the outbound message unit. Returns %0 on success and
+ * %-EINVAL or %-ENOMEM on failure.
+ */
+static int
+fsl_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+ int i, j, rc = 0;
+ struct rio_priv *priv = mport->priv;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ if ((entries < RIO_MIN_TX_RING_SIZE) ||
+ (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Initialize shadow copy ring */
+ rmu->msg_tx_ring.dev_id = dev_id;
+ rmu->msg_tx_ring.size = entries;
+
+ for (i = 0; i < rmu->msg_tx_ring.size; i++) {
+ rmu->msg_tx_ring.virt_buffer[i] =
+ dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
+ &rmu->msg_tx_ring.phys_buffer[i], GFP_KERNEL);
+ if (!rmu->msg_tx_ring.virt_buffer[i]) {
+ rc = -ENOMEM;
+ for (j = 0; j < rmu->msg_tx_ring.size; j++)
+ if (rmu->msg_tx_ring.virt_buffer[j])
+ dma_free_coherent(priv->dev,
+ RIO_MSG_BUFFER_SIZE,
+ rmu->msg_tx_ring.
+ virt_buffer[j],
+ rmu->msg_tx_ring.
+ phys_buffer[j]);
+ goto out;
+ }
+ }
+
+ /* Initialize outbound message descriptor ring */
+ rmu->msg_tx_ring.virt = dma_alloc_coherent(priv->dev,
+ rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ &rmu->msg_tx_ring.phys, GFP_KERNEL);
+ if (!rmu->msg_tx_ring.virt) {
+ rc = -ENOMEM;
+ goto out_dma;
+ }
+ memset(rmu->msg_tx_ring.virt, 0,
+ rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE);
+ rmu->msg_tx_ring.tx_slot = 0;
+
+ /* Point dequeue/enqueue pointers at first entry in ring */
+ out_be32(&rmu->msg_regs->odqdpar, rmu->msg_tx_ring.phys);
+ out_be32(&rmu->msg_regs->odqepar, rmu->msg_tx_ring.phys);
+
+ /* Configure for snooping */
+ out_be32(&rmu->msg_regs->osar, 0x00000004);
+
+ /* Clear interrupt status */
+ out_be32(&rmu->msg_regs->osr, 0x000000b3);
+
+ /* Hook up outbound message handler */
+ rc = request_irq(IRQ_RIO_TX(mport), fsl_rio_tx_handler, 0,
+ "msg_tx", (void *)mport);
+ if (rc < 0)
+ goto out_irq;
+
+ /*
+ * Configure outbound message unit
+ * Snooping
+ * Interrupts (all enabled, except QEIE)
+ * Chaining mode
+ * Disable
+ */
+ out_be32(&rmu->msg_regs->omr, 0x00100220);
+
+ /* Set number of entries */
+ out_be32(&rmu->msg_regs->omr,
+ in_be32(&rmu->msg_regs->omr) |
+ ((get_bitmask_order(entries) - 2) << 12));
+
+ /* Now enable the unit */
+ out_be32(&rmu->msg_regs->omr, in_be32(&rmu->msg_regs->omr) | 0x1);
+
+out:
+ return rc;
+
+out_irq:
+ dma_free_coherent(priv->dev,
+ rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ rmu->msg_tx_ring.virt, rmu->msg_tx_ring.phys);
+
+out_dma:
+ for (i = 0; i < rmu->msg_tx_ring.size; i++)
+ dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
+ rmu->msg_tx_ring.virt_buffer[i],
+ rmu->msg_tx_ring.phys_buffer[i]);
+
+ return rc;
+}
+
+/**
+ * fsl_close_outb_mbox - Shut down MPC85xx outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the outbound message unit, free all buffers, and
+ * frees the outbound message interrupt.
+ */
+static void fsl_close_outb_mbox(struct rio_mport *mport, int mbox)
+{
+ struct rio_priv *priv = mport->priv;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ /* Disable inbound message unit */
+ out_be32(&rmu->msg_regs->omr, 0);
+
+ /* Free ring */
+ dma_free_coherent(priv->dev,
+ rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ rmu->msg_tx_ring.virt, rmu->msg_tx_ring.phys);
+
+ /* Free interrupt */
+ free_irq(IRQ_RIO_TX(mport), (void *)mport);
+}
+
+/**
+ * fsl_open_inb_mbox - Initialize MPC85xx inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the inbound mailbox ring
+ *
+ * Initializes buffer ring, request the inbound message interrupt,
+ * and enables the inbound message unit. Returns %0 on success
+ * and %-EINVAL or %-ENOMEM on failure.
+ */
+static int
+fsl_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+ int i, rc = 0;
+ struct rio_priv *priv = mport->priv;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ if ((entries < RIO_MIN_RX_RING_SIZE) ||
+ (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Initialize client buffer ring */
+ rmu->msg_rx_ring.dev_id = dev_id;
+ rmu->msg_rx_ring.size = entries;
+ rmu->msg_rx_ring.rx_slot = 0;
+ for (i = 0; i < rmu->msg_rx_ring.size; i++)
+ rmu->msg_rx_ring.virt_buffer[i] = NULL;
+
+ /* Initialize inbound message ring */
+ rmu->msg_rx_ring.virt = dma_alloc_coherent(priv->dev,
+ rmu->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+ &rmu->msg_rx_ring.phys, GFP_KERNEL);
+ if (!rmu->msg_rx_ring.virt) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ /* Point dequeue/enqueue pointers at first entry in ring */
+ out_be32(&rmu->msg_regs->ifqdpar, (u32) rmu->msg_rx_ring.phys);
+ out_be32(&rmu->msg_regs->ifqepar, (u32) rmu->msg_rx_ring.phys);
+
+ /* Clear interrupt status */
+ out_be32(&rmu->msg_regs->isr, 0x00000091);
+
+ /* Hook up inbound message handler */
+ rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
+ "msg_rx", (void *)mport);
+ if (rc < 0) {
+ dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
+ rmu->msg_tx_ring.virt_buffer[i],
+ rmu->msg_tx_ring.phys_buffer[i]);
+ goto out;
+ }
+
+ /*
+ * Configure inbound message unit:
+ * Snooping
+ * 4KB max message size
+ * Unmask all interrupt sources
+ * Disable
+ */
+ out_be32(&rmu->msg_regs->imr, 0x001b0060);
+
+ /* Set number of queue entries */
+ setbits32(&rmu->msg_regs->imr, (get_bitmask_order(entries) - 2) << 12);
+
+ /* Now enable the unit */
+ setbits32(&rmu->msg_regs->imr, 0x1);
+
+out:
+ return rc;
+}
+
+/**
+ * fsl_close_inb_mbox - Shut down MPC85xx inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the inbound message unit, free all buffers, and
+ * frees the inbound message interrupt.
+ */
+static void fsl_close_inb_mbox(struct rio_mport *mport, int mbox)
+{
+ struct rio_priv *priv = mport->priv;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ /* Disable inbound message unit */
+ out_be32(&rmu->msg_regs->imr, 0);
+
+ /* Free ring */
+ dma_free_coherent(priv->dev, rmu->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+ rmu->msg_rx_ring.virt, rmu->msg_rx_ring.phys);
+
+ /* Free interrupt */
+ free_irq(IRQ_RIO_RX(mport), (void *)mport);
+}
+
+/**
+ * fsl_add_inb_buffer - Add buffer to the MPC85xx inbound message queue
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ * @buf: Buffer to add to inbound queue
+ *
+ * Adds the @buf buffer to the MPC85xx inbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+static int fsl_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
+{
+ int rc = 0;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ pr_debug("RIO: fsl_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
+ rmu->msg_rx_ring.rx_slot);
+
+ if (rmu->msg_rx_ring.virt_buffer[rmu->msg_rx_ring.rx_slot]) {
+ printk(KERN_ERR
+ "RIO: error adding inbound buffer %d, buffer exists\n",
+ rmu->msg_rx_ring.rx_slot);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ rmu->msg_rx_ring.virt_buffer[rmu->msg_rx_ring.rx_slot] = buf;
+ if (++rmu->msg_rx_ring.rx_slot == rmu->msg_rx_ring.size)
+ rmu->msg_rx_ring.rx_slot = 0;
+
+out:
+ return rc;
+}
+
+/**
+ * fsl_get_inb_message - Fetch inbound message from the MPC85xx message unit
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ *
+ * Gets the next available inbound message from the inbound message queue.
+ * A pointer to the message is returned on success or NULL on failure.
+ */
+static void *fsl_get_inb_message(struct rio_mport *mport, int mbox)
+{
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+ u32 phys_buf, virt_buf;
+ void *buf = NULL;
+ int buf_idx;
+
+ phys_buf = in_be32(&rmu->msg_regs->ifqdpar);
+
+ /* If no more messages, then bail out */
+ if (phys_buf == in_be32(&rmu->msg_regs->ifqepar))
+ goto out2;
+
+ virt_buf = (u32) rmu->msg_rx_ring.virt + (phys_buf
+ - rmu->msg_rx_ring.phys);
+ buf_idx = (phys_buf - rmu->msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
+ buf = rmu->msg_rx_ring.virt_buffer[buf_idx];
+
+ if (!buf) {
+ printk(KERN_ERR
+ "RIO: inbound message copy failed, no buffers\n");
+ goto out1;
+ }
+
+ /* Copy max message size, caller is expected to allocate that big */
+ memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
+
+ /* Clear the available buffer */
+ rmu->msg_rx_ring.virt_buffer[buf_idx] = NULL;
+
+out1:
+ setbits32(&rmu->msg_regs->imr, RIO_MSG_IMR_MI);
+
+out2:
+ return buf;
+}
+
+/**
+ * fsl_rio_doorbell_init - MPC85xx doorbell interface init
+ * @mport: Master port implementing the inbound doorbell unit
+ *
+ * Initializes doorbell unit hardware and inbound DMA buffer
+ * ring. Called from fsl_rio_setup(). Returns %0 on success
+ * or %-ENOMEM on failure.
+ */
+static int fsl_rio_doorbell_init(struct rio_mport *mport)
+{
+ struct rio_priv *priv = mport->priv;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+ int rc = 0;
+
+ /* Map outbound doorbell window immediately after maintenance window */
+ rmu->dbell_win = ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE,
+ RIO_DBELL_WIN_SIZE);
+ if (!rmu->dbell_win) {
+ printk(KERN_ERR
+ "RIO: unable to map outbound doorbell window\n");
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ /* Initialize inbound doorbells */
+ rmu->dbell_ring.virt = dma_alloc_coherent(priv->dev, 512 *
+ DOORBELL_MESSAGE_SIZE, &rmu->dbell_ring.phys, GFP_KERNEL);
+ if (!rmu->dbell_ring.virt) {
+ printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
+ rc = -ENOMEM;
+ iounmap(rmu->dbell_win);
+ goto out;
+ }
+
+ /* Point dequeue/enqueue pointers at first entry in ring */
+ out_be32(&rmu->msg_regs->dqdpar, (u32) rmu->dbell_ring.phys);
+ out_be32(&rmu->msg_regs->dqepar, (u32) rmu->dbell_ring.phys);
+
+ /* Clear interrupt status */
+ out_be32(&rmu->msg_regs->dsr, 0x00000091);
+
+ /* Hook up doorbell handler */
+ rc = request_irq(IRQ_RIO_BELL(mport), fsl_rio_dbell_handler, 0,
+ "dbell_rx", (void *)mport);
+ if (rc < 0) {
+ iounmap(rmu->dbell_win);
+ dma_free_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE,
+ rmu->dbell_ring.virt, rmu->dbell_ring.phys);
+ printk(KERN_ERR
+ "MPC85xx RIO: unable to request inbound doorbell irq");
+ goto out;
+ }
+
+ /* Configure doorbells for snooping, 512 entries, and enable */
+ out_be32(&rmu->msg_regs->dmr, 0x00108161);
+
+out:
+ return rc;
+}
+
+int fsl_rio_setup_rmu(struct rio_mport *mport, struct device_node *node)
+{
+ struct rio_priv *priv;
+ struct fsl_rmu *rmu;
+ struct rio_ops *ops;
+
+ if (!mport || !mport->priv || !node)
+ return -1;
+
+ rmu = kzalloc(sizeof(struct fsl_rmu), GFP_KERNEL);
+ if (!rmu)
+ return -ENOMEM;
+
+ priv = mport->priv;
+ priv->rmm_handle = rmu;
+ rmu->dbell_atmu_regs = priv->atmu_regs + 2;
+ rmu->msg_regs = (struct rio_msg_regs *)(priv->regs_win +
+ ((mport->phy_type == RIO_PHY_SERIAL) ?
+ RIO_S_MSG_REGS_OFFSET : RIO_P_MSG_REGS_OFFSET));
+
+ rmu->bellirq = irq_of_parse_and_map(node, 2);
+ rmu->txirq = irq_of_parse_and_map(node, 3);
+ rmu->rxirq = irq_of_parse_and_map(node, 4);
+ dev_info(priv->dev, "bellirq: %d, txirq: %d, rxirq %d\n",
+ rmu->bellirq, rmu->txirq, rmu->rxirq);
+
+ ops = mport->ops;
+
+ ops->dsend = fsl_rio_doorbell_send;
+ ops->open_outb_mbox = fsl_open_outb_mbox;
+ ops->open_inb_mbox = fsl_open_inb_mbox;
+ ops->close_outb_mbox = fsl_close_outb_mbox;
+ ops->close_inb_mbox = fsl_close_inb_mbox;
+ ops->add_outb_message = fsl_add_outb_message;
+ ops->add_inb_buffer = fsl_add_inb_buffer;
+ ops->get_inb_message = fsl_get_inb_message;
+
+ rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
+ rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
+ rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
+
+ /* Configure outbound doorbell window */
+ out_be32(&rmu->dbell_atmu_regs->rowbar,
+ (mport->iores.start + RIO_MAINT_WIN_SIZE) >> 12);
+ /* 4k window size */
+ out_be32(&rmu->dbell_atmu_regs->rowar, 0x8004200b);
+
+ fsl_rio_doorbell_init(mport);
+
+ return 0;
+}
projects / users / hch / configfs.git / commitdiff