config RT2400PCI
tristate "Ralink rt2400 (PCI/PCMCIA) support"
depends on PCI
+ select RT2X00_LIB_MMIO
select RT2X00_LIB_PCI
select EEPROM_93CX6
---help---
config RT2500PCI
tristate "Ralink rt2500 (PCI/PCMCIA) support"
depends on PCI
+ select RT2X00_LIB_MMIO
select RT2X00_LIB_PCI
select EEPROM_93CX6
---help---
tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
depends on PCI
select RT2X00_LIB_PCI
+ select RT2X00_LIB_MMIO
select RT2X00_LIB_FIRMWARE
select RT2X00_LIB_CRYPTO
select CRC_ITU_T
tristate "Ralink rt27xx/rt28xx/rt30xx (PCI/PCIe/PCMCIA) support"
depends on PCI || SOC_RT288X || SOC_RT305X
select RT2800_LIB
+ select RT2X00_LIB_MMIO
select RT2X00_LIB_PCI if PCI
select RT2X00_LIB_SOC if SOC_RT288X || SOC_RT305X
select RT2X00_LIB_FIRMWARE
config RT2800_LIB
tristate
+config RT2X00_LIB_MMIO
+ tristate
+
config RT2X00_LIB_PCI
tristate
select RT2X00_LIB
rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS) += rt2x00leds.o
obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o
+obj-$(CONFIG_RT2X00_LIB_MMIO) += rt2x00mmio.o
obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o
obj-$(CONFIG_RT2X00_LIB_SOC) += rt2x00soc.o
obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00usb.o
#include <linux/slab.h>
#include "rt2x00.h"
+#include "rt2x00mmio.h"
#include "rt2x00pci.h"
#include "rt2400pci.h"
#include <linux/slab.h>
#include "rt2x00.h"
+#include "rt2x00mmio.h"
#include "rt2x00pci.h"
#include "rt2500pci.h"
#include <linux/eeprom_93cx6.h>
#include "rt2x00.h"
+#include "rt2x00mmio.h"
#include "rt2x00pci.h"
#include "rt2x00soc.h"
#include "rt2800lib.h"
--- /dev/null
+/*
+ Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+ <http://rt2x00.serialmonkey.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the
+ Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ Module: rt2x00mmio
+ Abstract: rt2x00 generic mmio device routines.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "rt2x00.h"
+#include "rt2x00mmio.h"
+
+/*
+ * Register access.
+ */
+int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ const struct rt2x00_field32 field,
+ u32 *reg)
+{
+ unsigned int i;
+
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ return 0;
+
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+ rt2x00pci_register_read(rt2x00dev, offset, reg);
+ if (!rt2x00_get_field32(*reg, field))
+ return 1;
+ udelay(REGISTER_BUSY_DELAY);
+ }
+
+ printk_once(KERN_ERR "%s() Indirect register access failed: "
+ "offset=0x%.08x, value=0x%.08x\n", __func__, offset, *reg);
+ *reg = ~0;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rt2x00pci_regbusy_read);
+
+bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev)
+{
+ struct data_queue *queue = rt2x00dev->rx;
+ struct queue_entry *entry;
+ struct queue_entry_priv_pci *entry_priv;
+ struct skb_frame_desc *skbdesc;
+ int max_rx = 16;
+
+ while (--max_rx) {
+ entry = rt2x00queue_get_entry(queue, Q_INDEX);
+ entry_priv = entry->priv_data;
+
+ if (rt2x00dev->ops->lib->get_entry_state(entry))
+ break;
+
+ /*
+ * Fill in desc fields of the skb descriptor
+ */
+ skbdesc = get_skb_frame_desc(entry->skb);
+ skbdesc->desc = entry_priv->desc;
+ skbdesc->desc_len = entry->queue->desc_size;
+
+ /*
+ * DMA is already done, notify rt2x00lib that
+ * it finished successfully.
+ */
+ rt2x00lib_dmastart(entry);
+ rt2x00lib_dmadone(entry);
+
+ /*
+ * Send the frame to rt2x00lib for further processing.
+ */
+ rt2x00lib_rxdone(entry, GFP_ATOMIC);
+ }
+
+ return !max_rx;
+}
+EXPORT_SYMBOL_GPL(rt2x00pci_rxdone);
+
+void rt2x00pci_flush_queue(struct data_queue *queue, bool drop)
+{
+ unsigned int i;
+
+ for (i = 0; !rt2x00queue_empty(queue) && i < 10; i++)
+ msleep(10);
+}
+EXPORT_SYMBOL_GPL(rt2x00pci_flush_queue);
+
+/*
+ * Device initialization handlers.
+ */
+static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev,
+ struct data_queue *queue)
+{
+ struct queue_entry_priv_pci *entry_priv;
+ void *addr;
+ dma_addr_t dma;
+ unsigned int i;
+
+ /*
+ * Allocate DMA memory for descriptor and buffer.
+ */
+ addr = dma_alloc_coherent(rt2x00dev->dev,
+ queue->limit * queue->desc_size,
+ &dma, GFP_KERNEL);
+ if (!addr)
+ return -ENOMEM;
+
+ memset(addr, 0, queue->limit * queue->desc_size);
+
+ /*
+ * Initialize all queue entries to contain valid addresses.
+ */
+ for (i = 0; i < queue->limit; i++) {
+ entry_priv = queue->entries[i].priv_data;
+ entry_priv->desc = addr + i * queue->desc_size;
+ entry_priv->desc_dma = dma + i * queue->desc_size;
+ }
+
+ return 0;
+}
+
+static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev,
+ struct data_queue *queue)
+{
+ struct queue_entry_priv_pci *entry_priv =
+ queue->entries[0].priv_data;
+
+ if (entry_priv->desc)
+ dma_free_coherent(rt2x00dev->dev,
+ queue->limit * queue->desc_size,
+ entry_priv->desc, entry_priv->desc_dma);
+ entry_priv->desc = NULL;
+}
+
+int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
+{
+ struct data_queue *queue;
+ int status;
+
+ /*
+ * Allocate DMA
+ */
+ queue_for_each(rt2x00dev, queue) {
+ status = rt2x00pci_alloc_queue_dma(rt2x00dev, queue);
+ if (status)
+ goto exit;
+ }
+
+ /*
+ * Register interrupt handler.
+ */
+ status = request_irq(rt2x00dev->irq,
+ rt2x00dev->ops->lib->irq_handler,
+ IRQF_SHARED, rt2x00dev->name, rt2x00dev);
+ if (status) {
+ ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n",
+ rt2x00dev->irq, status);
+ goto exit;
+ }
+
+ return 0;
+
+exit:
+ queue_for_each(rt2x00dev, queue)
+ rt2x00pci_free_queue_dma(rt2x00dev, queue);
+
+ return status;
+}
+EXPORT_SYMBOL_GPL(rt2x00pci_initialize);
+
+void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev)
+{
+ struct data_queue *queue;
+
+ /*
+ * Free irq line.
+ */
+ free_irq(rt2x00dev->irq, rt2x00dev);
+
+ /*
+ * Free DMA
+ */
+ queue_for_each(rt2x00dev, queue)
+ rt2x00pci_free_queue_dma(rt2x00dev, queue);
+}
+EXPORT_SYMBOL_GPL(rt2x00pci_uninitialize);
+
+/*
+ * rt2x00mmio module information.
+ */
+MODULE_AUTHOR(DRV_PROJECT);
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("rt2x00 mmio library");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+ <http://rt2x00.serialmonkey.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the
+ Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ Module: rt2x00mmio
+ Abstract: Data structures for the rt2x00mmio module.
+ */
+
+#ifndef RT2X00MMIO_H
+#define RT2X00MMIO_H
+
+#include <linux/io.h>
+
+/*
+ * Register access.
+ */
+static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ u32 *value)
+{
+ *value = readl(rt2x00dev->csr.base + offset);
+}
+
+static inline void rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ void *value, const u32 length)
+{
+ memcpy_fromio(value, rt2x00dev->csr.base + offset, length);
+}
+
+static inline void rt2x00pci_register_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ u32 value)
+{
+ writel(value, rt2x00dev->csr.base + offset);
+}
+
+static inline void rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ const void *value,
+ const u32 length)
+{
+ __iowrite32_copy(rt2x00dev->csr.base + offset, value, length >> 2);
+}
+
+/**
+ * rt2x00pci_regbusy_read - Read from register with busy check
+ * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
+ * @offset: Register offset
+ * @field: Field to check if register is busy
+ * @reg: Pointer to where register contents should be stored
+ *
+ * This function will read the given register, and checks if the
+ * register is busy. If it is, it will sleep for a couple of
+ * microseconds before reading the register again. If the register
+ * is not read after a certain timeout, this function will return
+ * FALSE.
+ */
+int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ const struct rt2x00_field32 field,
+ u32 *reg);
+
+/**
+ * struct queue_entry_priv_pci: Per entry PCI specific information
+ *
+ * @desc: Pointer to device descriptor
+ * @desc_dma: DMA pointer to &desc.
+ * @data: Pointer to device's entry memory.
+ * @data_dma: DMA pointer to &data.
+ */
+struct queue_entry_priv_pci {
+ __le32 *desc;
+ dma_addr_t desc_dma;
+};
+
+/**
+ * rt2x00pci_rxdone - Handle RX done events
+ * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
+ *
+ * Returns true if there are still rx frames pending and false if all
+ * pending rx frames were processed.
+ */
+bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev);
+
+/**
+ * rt2x00pci_flush_queue - Flush data queue
+ * @queue: Data queue to stop
+ * @drop: True to drop all pending frames.
+ *
+ * This will wait for a maximum of 100ms, waiting for the queues
+ * to become empty.
+ */
+void rt2x00pci_flush_queue(struct data_queue *queue, bool drop);
+
+/*
+ * Device initialization handlers.
+ */
+int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev);
+void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev);
+
+#endif /* RT2X00MMIO_H */
#include "rt2x00.h"
#include "rt2x00pci.h"
-/*
- * Register access.
- */
-int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
- const unsigned int offset,
- const struct rt2x00_field32 field,
- u32 *reg)
-{
- unsigned int i;
-
- if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
- return 0;
-
- for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
- rt2x00pci_register_read(rt2x00dev, offset, reg);
- if (!rt2x00_get_field32(*reg, field))
- return 1;
- udelay(REGISTER_BUSY_DELAY);
- }
-
- printk_once(KERN_ERR "%s() Indirect register access failed: "
- "offset=0x%.08x, value=0x%.08x\n", __func__, offset, *reg);
- *reg = ~0;
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(rt2x00pci_regbusy_read);
-
-bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev)
-{
- struct data_queue *queue = rt2x00dev->rx;
- struct queue_entry *entry;
- struct queue_entry_priv_pci *entry_priv;
- struct skb_frame_desc *skbdesc;
- int max_rx = 16;
-
- while (--max_rx) {
- entry = rt2x00queue_get_entry(queue, Q_INDEX);
- entry_priv = entry->priv_data;
-
- if (rt2x00dev->ops->lib->get_entry_state(entry))
- break;
-
- /*
- * Fill in desc fields of the skb descriptor
- */
- skbdesc = get_skb_frame_desc(entry->skb);
- skbdesc->desc = entry_priv->desc;
- skbdesc->desc_len = entry->queue->desc_size;
-
- /*
- * DMA is already done, notify rt2x00lib that
- * it finished successfully.
- */
- rt2x00lib_dmastart(entry);
- rt2x00lib_dmadone(entry);
-
- /*
- * Send the frame to rt2x00lib for further processing.
- */
- rt2x00lib_rxdone(entry, GFP_ATOMIC);
- }
-
- return !max_rx;
-}
-EXPORT_SYMBOL_GPL(rt2x00pci_rxdone);
-
-void rt2x00pci_flush_queue(struct data_queue *queue, bool drop)
-{
- unsigned int i;
-
- for (i = 0; !rt2x00queue_empty(queue) && i < 10; i++)
- msleep(10);
-}
-EXPORT_SYMBOL_GPL(rt2x00pci_flush_queue);
-
-/*
- * Device initialization handlers.
- */
-static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev,
- struct data_queue *queue)
-{
- struct queue_entry_priv_pci *entry_priv;
- void *addr;
- dma_addr_t dma;
- unsigned int i;
-
- /*
- * Allocate DMA memory for descriptor and buffer.
- */
- addr = dma_alloc_coherent(rt2x00dev->dev,
- queue->limit * queue->desc_size,
- &dma, GFP_KERNEL);
- if (!addr)
- return -ENOMEM;
-
- memset(addr, 0, queue->limit * queue->desc_size);
-
- /*
- * Initialize all queue entries to contain valid addresses.
- */
- for (i = 0; i < queue->limit; i++) {
- entry_priv = queue->entries[i].priv_data;
- entry_priv->desc = addr + i * queue->desc_size;
- entry_priv->desc_dma = dma + i * queue->desc_size;
- }
-
- return 0;
-}
-
-static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev,
- struct data_queue *queue)
-{
- struct queue_entry_priv_pci *entry_priv =
- queue->entries[0].priv_data;
-
- if (entry_priv->desc)
- dma_free_coherent(rt2x00dev->dev,
- queue->limit * queue->desc_size,
- entry_priv->desc, entry_priv->desc_dma);
- entry_priv->desc = NULL;
-}
-
-int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
-{
- struct data_queue *queue;
- int status;
-
- /*
- * Allocate DMA
- */
- queue_for_each(rt2x00dev, queue) {
- status = rt2x00pci_alloc_queue_dma(rt2x00dev, queue);
- if (status)
- goto exit;
- }
-
- /*
- * Register interrupt handler.
- */
- status = request_irq(rt2x00dev->irq,
- rt2x00dev->ops->lib->irq_handler,
- IRQF_SHARED, rt2x00dev->name, rt2x00dev);
- if (status) {
- ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n",
- rt2x00dev->irq, status);
- goto exit;
- }
-
- return 0;
-
-exit:
- queue_for_each(rt2x00dev, queue)
- rt2x00pci_free_queue_dma(rt2x00dev, queue);
-
- return status;
-}
-EXPORT_SYMBOL_GPL(rt2x00pci_initialize);
-
-void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev)
-{
- struct data_queue *queue;
-
- /*
- * Free irq line.
- */
- free_irq(rt2x00dev->irq, rt2x00dev);
-
- /*
- * Free DMA
- */
- queue_for_each(rt2x00dev, queue)
- rt2x00pci_free_queue_dma(rt2x00dev, queue);
-}
-EXPORT_SYMBOL_GPL(rt2x00pci_uninitialize);
-
/*
* PCI driver handlers.
*/
*/
#define PCI_DEVICE_DATA(__ops) .driver_data = (kernel_ulong_t)(__ops)
-/*
- * Register access.
- */
-static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev,
- const unsigned int offset,
- u32 *value)
-{
- *value = readl(rt2x00dev->csr.base + offset);
-}
-
-static inline void rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev,
- const unsigned int offset,
- void *value, const u32 length)
-{
- memcpy_fromio(value, rt2x00dev->csr.base + offset, length);
-}
-
-static inline void rt2x00pci_register_write(struct rt2x00_dev *rt2x00dev,
- const unsigned int offset,
- u32 value)
-{
- writel(value, rt2x00dev->csr.base + offset);
-}
-
-static inline void rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev,
- const unsigned int offset,
- const void *value,
- const u32 length)
-{
- __iowrite32_copy(rt2x00dev->csr.base + offset, value, length >> 2);
-}
-
-/**
- * rt2x00pci_regbusy_read - Read from register with busy check
- * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
- * @offset: Register offset
- * @field: Field to check if register is busy
- * @reg: Pointer to where register contents should be stored
- *
- * This function will read the given register, and checks if the
- * register is busy. If it is, it will sleep for a couple of
- * microseconds before reading the register again. If the register
- * is not read after a certain timeout, this function will return
- * FALSE.
- */
-int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
- const unsigned int offset,
- const struct rt2x00_field32 field,
- u32 *reg);
-
-/**
- * struct queue_entry_priv_pci: Per entry PCI specific information
- *
- * @desc: Pointer to device descriptor
- * @desc_dma: DMA pointer to &desc.
- * @data: Pointer to device's entry memory.
- * @data_dma: DMA pointer to &data.
- */
-struct queue_entry_priv_pci {
- __le32 *desc;
- dma_addr_t desc_dma;
-};
-
-/**
- * rt2x00pci_rxdone - Handle RX done events
- * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
- *
- * Returns true if there are still rx frames pending and false if all
- * pending rx frames were processed.
- */
-bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev);
-
-/**
- * rt2x00pci_flush_queue - Flush data queue
- * @queue: Data queue to stop
- * @drop: True to drop all pending frames.
- *
- * This will wait for a maximum of 100ms, waiting for the queues
- * to become empty.
- */
-void rt2x00pci_flush_queue(struct data_queue *queue, bool drop);
-
-/*
- * Device initialization handlers.
- */
-int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev);
-void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev);
-
/*
* PCI driver handlers.
*/
#include <linux/eeprom_93cx6.h>
#include "rt2x00.h"
+#include "rt2x00mmio.h"
#include "rt2x00pci.h"
#include "rt61pci.h"
projects / users / hch / configfs.git / commitdiff