Staging: wbusb: fix a bunch of compiler warnings

First cut at removing some obvious compiler warnings.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/staging/winbond/linux/wbusb.c b/drivers/staging/winbond/linux/wbusb.c
index fb216de1c6bade3a042560fbb2e36ab5bd65c436..f4a7875f2389673d146c7d840be4383156eb6a9c 100644 (file)
--- a/drivers/staging/winbond/linux/wbusb.c
+++ b/drivers/staging/winbond/linux/wbusb.c
@@ -19,16 +19,16 @@ static struct usb_device_id wb35_table[] __devinitdata = {
        {USB_DEVICE(0x18E8, 0x6230)},
        {USB_DEVICE(0x18E8, 0x6233)},
        {USB_DEVICE(0x1131, 0x2035)},
-       {}
+       { 0, }
 };
 
 MODULE_DEVICE_TABLE(usb, wb35_table);
 
-static const struct ieee80211_rate wbsoft_rates[] = {
+static struct ieee80211_rate wbsoft_rates[] = {
        { .bitrate = 10, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
 };
 
-static const struct ieee80211_channel wbsoft_channels[] = {
+static struct ieee80211_channel wbsoft_channels[] = {
        { .center_freq = 2412},
 };
 
@@ -49,9 +49,22 @@ static void wbsoft_remove_interface(struct ieee80211_hw *dev,
        printk("wbsoft_remove interface called\n");
 }
 
-static int wbsoft_nop(void)
+static void wbsoft_stop(struct ieee80211_hw *hw)
 {
-       printk("wbsoft_nop called\n");
+       printk(KERN_INFO "%s called\n", __func__);
+}
+
+static int wbsoft_get_stats(struct ieee80211_hw *hw,
+                           struct ieee80211_low_level_stats *stats)
+{
+       printk(KERN_INFO "%s called\n", __func__);
+       return 0;
+}
+
+static int wbsoft_get_tx_stats(struct ieee80211_hw *hw,
+                              struct ieee80211_tx_queue_stats *stats)
+{
+       printk(KERN_INFO "%s called\n", __func__);
        return 0;
 }
 
@@ -92,8 +105,7 @@ static void wbsoft_configure_filter(struct ieee80211_hw *dev,
        *total_flags = new_flags;
 }
 
-static int wbsoft_tx(struct ieee80211_hw *dev, struct sk_buff *skb,
-                     struct ieee80211_tx_control *control)
+static int wbsoft_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
        char *buffer = kmalloc(skb->len, GFP_ATOMIC);
        printk("Sending frame %d bytes\n", skb->len);
@@ -158,14 +170,14 @@ static u64 wbsoft_get_tsf(struct ieee80211_hw *dev)
 static const struct ieee80211_ops wbsoft_ops = {
        .tx                     = wbsoft_tx,
        .start                  = wbsoft_start,         /* Start can be pretty much empty as we do WbWLanInitialize() during probe? */
-       .stop                   = wbsoft_nop,
+       .stop                   = wbsoft_stop,
        .add_interface          = wbsoft_add_interface,
        .remove_interface       = wbsoft_remove_interface,
        .config                 = wbsoft_config,
        .config_interface       = wbsoft_config_interface,
        .configure_filter       = wbsoft_configure_filter,
-       .get_stats              = wbsoft_nop,
-       .get_tx_stats           = wbsoft_nop,
+       .get_stats              = wbsoft_get_stats,
+       .get_tx_stats           = wbsoft_get_tx_stats,
        .get_tsf                = wbsoft_get_tsf,
 // conf_tx: hal_set_cwmin()/hal_set_cwmax;
 };
@@ -224,6 +236,7 @@ int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table)
        {
                struct wbsoft_priv *priv;
                struct ieee80211_hw *dev;
+               static struct ieee80211_supported_band band;
                int res;
 
                dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops);
@@ -252,8 +265,6 @@ int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table)
 
                dev->queues = 1;
 
-               static struct ieee80211_supported_band band;
-
                band.channels = wbsoft_channels;
                band.n_channels = ARRAY_SIZE(wbsoft_channels);
                band.bitrates = wbsoft_rates;

diff --git a/drivers/staging/winbond/mds.c b/drivers/staging/winbond/mds.c
index 400397c79b7293674159ac8665dd3d54e44ceae1..f1de813f9c76d567a53f4d04a01480149e373223 100644 (file)
--- a/drivers/staging/winbond/mds.c
+++ b/drivers/staging/winbond/mds.c
@@ -437,7 +437,7 @@ Mds_DurationSet(  PADAPTER Adapter,  PDESCRIPTOR pDes,  u8 *buffer )
        u8      Rate, i;
        unsigned char   CTS_on = FALSE, RTS_on = FALSE;
        PT00_DESCRIPTOR pNextT00;
-       u16 BodyLen;
+       u16 BodyLen = 0;
        unsigned char boGroupAddr = FALSE;
 
 

diff --git a/drivers/staging/winbond/sme_api.c b/drivers/staging/winbond/sme_api.c
index 40e93b7600ebad5ec3edd093c89dd6c8a8bbf5c8..31c9673ea86534da5df804519c35be88d957e85c 100644 (file)
--- a/drivers/staging/winbond/sme_api.c
+++ b/drivers/staging/winbond/sme_api.c
@@ -10,4 +10,5 @@
 s8 sme_get_rssi(void *pcore_data, s32 *prssi)
 {
        BUG();
+       return 0;
 }