EXPORT_SYMBOL(__stack_chk_guard);
#endif
-void soft_restart(unsigned long addr)
-{
- setup_mm_for_reboot();
- cpu_soft_restart(virt_to_phys(cpu_reset), addr);
- /* Should never get here */
- BUG();
-}
-
/*
* Function pointers to optional machine specific functions
*/
/*
* Restart requires that the secondary CPUs stop performing any activity
- * while the primary CPU resets the system. Systems with a single CPU can
- * use soft_restart() as their machine descriptor's .restart hook, since that
- * will cause the only available CPU to reset. Systems with multiple CPUs must
+ * while the primary CPU resets the system. Systems with multiple CPUs must
* provide a HW restart implementation, to ensure that all CPUs reset at once.
* This is required so that any code running after reset on the primary CPU
* doesn't have to co-ordinate with other CPUs to ensure they aren't still
#include "proc-macros.S"
-/*
- * __flush_dcache_all()
- *
- * Flush the whole D-cache.
- *
- * Corrupted registers: x0-x7, x9-x11
- */
-__flush_dcache_all:
- dmb sy // ensure ordering with previous memory accesses
- mrs x0, clidr_el1 // read clidr
- and x3, x0, #0x7000000 // extract loc from clidr
- lsr x3, x3, #23 // left align loc bit field
- cbz x3, finished // if loc is 0, then no need to clean
- mov x10, #0 // start clean at cache level 0
-loop1:
- add x2, x10, x10, lsr #1 // work out 3x current cache level
- lsr x1, x0, x2 // extract cache type bits from clidr
- and x1, x1, #7 // mask of the bits for current cache only
- cmp x1, #2 // see what cache we have at this level
- b.lt skip // skip if no cache, or just i-cache
- save_and_disable_irqs x9 // make CSSELR and CCSIDR access atomic
- msr csselr_el1, x10 // select current cache level in csselr
- isb // isb to sych the new cssr&csidr
- mrs x1, ccsidr_el1 // read the new ccsidr
- restore_irqs x9
- and x2, x1, #7 // extract the length of the cache lines
- add x2, x2, #4 // add 4 (line length offset)
- mov x4, #0x3ff
- and x4, x4, x1, lsr #3 // find maximum number on the way size
- clz w5, w4 // find bit position of way size increment
- mov x7, #0x7fff
- and x7, x7, x1, lsr #13 // extract max number of the index size
-loop2:
- mov x9, x4 // create working copy of max way size
-loop3:
- lsl x6, x9, x5
- orr x11, x10, x6 // factor way and cache number into x11
- lsl x6, x7, x2
- orr x11, x11, x6 // factor index number into x11
- dc cisw, x11 // clean & invalidate by set/way
- subs x9, x9, #1 // decrement the way
- b.ge loop3
- subs x7, x7, #1 // decrement the index
- b.ge loop2
-skip:
- add x10, x10, #2 // increment cache number
- cmp x3, x10
- b.gt loop1
-finished:
- mov x10, #0 // swith back to cache level 0
- msr csselr_el1, x10 // select current cache level in csselr
- dsb sy
- isb
- ret
-ENDPROC(__flush_dcache_all)
-
-/*
- * flush_cache_all()
- *
- * Flush the entire cache system. The data cache flush is now achieved
- * using atomic clean / invalidates working outwards from L1 cache. This
- * is done using Set/Way based cache maintainance instructions. The
- * instruction cache can still be invalidated back to the point of
- * unification in a single instruction.
- */
-ENTRY(flush_cache_all)
- mov x12, lr
- bl __flush_dcache_all
- mov x0, #0
- ic ialluis // I+BTB cache invalidate
- ret x12
-ENDPROC(flush_cache_all)
-
/*
* flush_icache_range(start,end)
*
#define MAIR(attr, mt) ((attr) << ((mt) * 8))
-/*
- * cpu_cache_off()
- *
- * Turn the CPU D-cache off.
- */
-ENTRY(cpu_cache_off)
- mrs x0, sctlr_el1
- bic x0, x0, #1 << 2 // clear SCTLR.C
- msr sctlr_el1, x0
- isb
- ret
-ENDPROC(cpu_cache_off)
-
-/*
- * cpu_reset(loc)
- *
- * Perform a soft reset of the system. Put the CPU into the same state
- * as it would be if it had been reset, and branch to what would be the
- * reset vector. It must be executed with the flat identity mapping.
- *
- * - loc - location to jump to for soft reset
- */
- .align 5
-ENTRY(cpu_reset)
- mrs x1, sctlr_el1
- bic x1, x1, #1
- msr sctlr_el1, x1 // disable the MMU
- isb
- ret x0
-ENDPROC(cpu_reset)
-
-ENTRY(cpu_soft_restart)
- /* Save address of cpu_reset() and reset address */
- mov x19, x0
- mov x20, x1
-
- /* Turn D-cache off */
- bl cpu_cache_off
-
- /* Push out all dirty data, and ensure cache is empty */
- bl flush_cache_all
-
- mov x0, x20
- ret x19
-ENDPROC(cpu_soft_restart)
-
/*
* cpu_do_idle()
*
projects / users / hch / configfs.git / commitdiff