ARM: dts: sunxi: Add Neutis N5H3 support

Emlid Neutis N5H3 is a version of Emlid Neutis SoM with H3 instead of H5
inside.

6eeb4180d4b9 ("ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device")
was used as reference.

Signed-off-by: Georgii Staroselskii <georgii.staroselskii@emlid.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 08011dc8c7a692eea80027c4fbe21127d50608f3..868a99015f39fed412235ea0b4598b7bf567b545 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1129,6 +1129,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
        sun8i-h3-orangepi-plus2e.dtb \
        sun8i-h3-orangepi-zero-plus2.dtb \
        sun8i-h3-rervision-dvk.dtb \
+       sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
        sun8i-r16-bananapi-m2m.dtb \
        sun8i-r16-nintendo-nes-classic.dtb \
        sun8i-r16-nintendo-super-nes-classic.dtb \

diff --git a/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts b/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts
new file mode 100644 (file)
index 0000000..02fbe00
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTS for Emlid Neutis N5 Dev board.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgiii.staroselskii@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3-emlid-neutis-n5h3.dtsi"
+
+/ {
+       model = "Emlid Neutis N5H3 Developer board";
+       compatible = "emlid,neutis-n5h3-devboard",
+                    "emlid,neutis-n5h3",
+                    "allwinner,sun8i-h3";
+
+       vdd_cpux: gpio-regulator {
+               compatible = "regulator-gpio";
+               regulator-name = "vdd-cpux";
+               regulator-type = "voltage";
+               regulator-boot-on;
+               regulator-always-on;
+               regulator-min-microvolt = <1100000>;
+               regulator-max-microvolt = <1300000>;
+               regulator-ramp-delay = <50>; /* 4ms */
+               gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+               gpios-states = <0x1>;
+               states = <1100000 0x0>, <1300000 0x1>;
+       };
+
+       connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
+};
+
+&cpu0 {
+       cpu-supply = <&vdd_cpux>;
+};
+
+&codec {
+       status = "okay";
+};
+
+&emac {
+       phy-handle = <&int_mii_phy>;
+       phy-mode = "mii";
+       allwinner,leds-active-low;
+       status = "okay";
+};
+
+&hdmi {
+       status = "okay";
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
+&i2c1 {
+       status = "okay";
+};

diff --git a/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi b/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi
new file mode 100644 (file)
index 0000000..eedd5da
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTSI for Emlid Neutis N5 SoM.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+#include <arm/sunxi-h3-h5-emlid-neutis.dtsi>