#include <linux/io.h>
 #include <linux/platform_data/usb-ehci-mxc.h>
 
+#include "ehci.h"
 #include "hardware.h"
 
 #define USBCTRL_OTGBASE_OFFSET 0x600
 
 #include <linux/io.h>
 #include <linux/platform_data/usb-ehci-mxc.h>
 
+#include "ehci.h"
 #include "hardware.h"
 
 #define USBCTRL_OTGBASE_OFFSET 0x600
 
 #include <linux/io.h>
 #include <linux/platform_data/usb-ehci-mxc.h>
 
+#include "ehci.h"
 #include "hardware.h"
 
 #define USBCTRL_OTGBASE_OFFSET 0x600
 
 #include <linux/io.h>
 #include <linux/platform_data/usb-ehci-mxc.h>
 
+#include "ehci.h"
 #include "hardware.h"
 
 #define USBCTRL_OTGBASE_OFFSET 0x600
 
 #include <linux/io.h>
 #include <linux/platform_data/usb-ehci-mxc.h>
 
+#include "ehci.h"
 #include "hardware.h"
 
 #define MXC_OTG_OFFSET                 0
 
--- /dev/null
+#ifndef __MACH_IMX_EHCI_H
+#define __MACH_IMX_EHCI_H
+
+/* values for portsc field */
+#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
+#define MXC_EHCI_FORCE_FS              (1 << 24)
+#define MXC_EHCI_UTMI_8BIT             (0 << 28)
+#define MXC_EHCI_UTMI_16BIT            (1 << 28)
+#define MXC_EHCI_SERIAL                        (1 << 29)
+#define MXC_EHCI_MODE_UTMI             (0 << 30)
+#define MXC_EHCI_MODE_PHILIPS          (1 << 30)
+#define MXC_EHCI_MODE_ULPI             (2 << 30)
+#define MXC_EHCI_MODE_SERIAL           (3 << 30)
+
+/* values for flags field */
+#define MXC_EHCI_INTERFACE_DIFF_UNI    (0 << 0)
+#define MXC_EHCI_INTERFACE_DIFF_BI     (1 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_UNI  (2 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_BI   (3 << 0)
+#define MXC_EHCI_INTERFACE_MASK                (0xf)
+
+#define MXC_EHCI_POWER_PINS_ENABLED    (1 << 5)
+#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH   (1 << 6)
+#define MXC_EHCI_OC_PIN_ACTIVE_LOW     (1 << 7)
+#define MXC_EHCI_TTL_ENABLED           (1 << 8)
+
+#define MXC_EHCI_INTERNAL_PHY          (1 << 9)
+#define MXC_EHCI_IPPUE_DOWN            (1 << 10)
+#define MXC_EHCI_IPPUE_UP              (1 << 11)
+#define MXC_EHCI_WAKEUP_ENABLED                (1 << 12)
+#define MXC_EHCI_ITC_NO_THRESHOLD      (1 << 13)
+
+#define MXC_USBCTRL_OFFSET             0
+#define MXC_USB_PHY_CTR_FUNC_OFFSET    0x8
+#define MXC_USB_PHY_CTR_FUNC2_OFFSET   0xc
+#define MXC_USBH2CTRL_OFFSET           0x14
+
+#define MX5_USBOTHER_REGS_OFFSET       0x800
+
+/* USB_PHY_CTRL_FUNC2*/
+#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK              0x3
+#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT             0
+
+int mx51_initialize_usb_hw(int port, unsigned int flags);
+int mx25_initialize_usb_hw(int port, unsigned int flags);
+int mx31_initialize_usb_hw(int port, unsigned int flags);
+int mx35_initialize_usb_hw(int port, unsigned int flags);
+int mx27_initialize_usb_hw(int port, unsigned int flags);
+
+#endif /* __MACH_IMX_EHCI_H */
 
 #include "common.h"
 #include "devices-imx31.h"
 #include "crmregs-imx3.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx3.h"
 #include "ulpi.h"
 
 
 #include "common.h"
 #include "devices-imx27.h"
+#include "ehci.h"
 #include "eukrea-baseboards.h"
 #include "hardware.h"
 #include "iomux-mx27.h"
 
 
 #include "common.h"
 #include "devices-imx35.h"
+#include "ehci.h"
 #include "eukrea-baseboards.h"
 #include "hardware.h"
 #include "iomux-mx35.h"
 
 
 #include "common.h"
 #include "devices-imx25.h"
+#include "ehci.h"
 #include "eukrea-baseboards.h"
 #include "hardware.h"
 #include "iomux-mx25.h"
 
 
 #include "common.h"
 #include "devices-imx27.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx27.h"
 
 
 
 #include "common.h"
 #include "devices-imx25.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx25.h"
 #include "mx25.h"
 
 #include "3ds_debugboard.h"
 #include "common.h"
 #include "devices-imx27.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx27.h"
 #include "ulpi.h"
 
 #include "3ds_debugboard.h"
 #include "common.h"
 #include "devices-imx31.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx3.h"
 #include "ulpi.h"
 
 #include "board-mx31lilly.h"
 #include "common.h"
 #include "devices-imx31.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx3.h"
 #include "ulpi.h"
 
 #include "board-mx31lite.h"
 #include "common.h"
 #include "devices-imx31.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx3.h"
 #include "ulpi.h"
 
 #include "board-mx31moboard.h"
 #include "common.h"
 #include "devices-imx31.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx3.h"
 #include "ulpi.h"
 
 #include "3ds_debugboard.h"
 #include "common.h"
 #include "devices-imx35.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx35.h"
 
 
 
 #include "common.h"
 #include "devices-imx27.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx27.h"
 #include "ulpi.h"
 
 
 #include "common.h"
 #include "devices-imx31.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx3.h"
 #include "pcm037.h"
 
 #include "board-pcm038.h"
 #include "common.h"
 #include "devices-imx27.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx27.h"
 #include "ulpi.h"
 
 
 #include "common.h"
 #include "devices-imx35.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx35.h"
 #include "ulpi.h"
 
 
 #include "common.h"
 #include "devices-imx35.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx35.h"
 
 
 
 #include "common.h"
 #include "devices-imx31.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx3.h"
 #include "ulpi.h"
 
 
 #include "common.h"
 #include "devices-imx31.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx3.h"
 #include "ulpi.h"
 
 #include "board-mx31moboard.h"
 #include "common.h"
 #include "devices-imx31.h"
+#include "ehci.h"
 #include "hardware.h"
 #include "iomux-mx3.h"
 #include "ulpi.h"
 
 #ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H
 #define __INCLUDE_ASM_ARCH_MXC_EHCI_H
 
-/* values for portsc field */
-#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
-#define MXC_EHCI_FORCE_FS              (1 << 24)
-#define MXC_EHCI_UTMI_8BIT             (0 << 28)
-#define MXC_EHCI_UTMI_16BIT            (1 << 28)
-#define MXC_EHCI_SERIAL                        (1 << 29)
-#define MXC_EHCI_MODE_UTMI             (0 << 30)
-#define MXC_EHCI_MODE_PHILIPS          (1 << 30)
-#define MXC_EHCI_MODE_ULPI             (2 << 30)
-#define MXC_EHCI_MODE_SERIAL           (3 << 30)
-
-/* values for flags field */
-#define MXC_EHCI_INTERFACE_DIFF_UNI    (0 << 0)
-#define MXC_EHCI_INTERFACE_DIFF_BI     (1 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_UNI  (2 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_BI   (3 << 0)
-#define MXC_EHCI_INTERFACE_MASK                (0xf)
-
-#define MXC_EHCI_POWER_PINS_ENABLED    (1 << 5)
-#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH   (1 << 6)
-#define MXC_EHCI_OC_PIN_ACTIVE_LOW     (1 << 7)
-#define MXC_EHCI_TTL_ENABLED           (1 << 8)
-
-#define MXC_EHCI_INTERNAL_PHY          (1 << 9)
-#define MXC_EHCI_IPPUE_DOWN            (1 << 10)
-#define MXC_EHCI_IPPUE_UP              (1 << 11)
-#define MXC_EHCI_WAKEUP_ENABLED                (1 << 12)
-#define MXC_EHCI_ITC_NO_THRESHOLD      (1 << 13)
-
-#define MXC_USBCTRL_OFFSET             0
-#define MXC_USB_PHY_CTR_FUNC_OFFSET    0x8
-#define MXC_USB_PHY_CTR_FUNC2_OFFSET   0xc
-#define MXC_USBH2CTRL_OFFSET           0x14
-
-#define MX5_USBOTHER_REGS_OFFSET       0x800
-
-/* USB_PHY_CTRL_FUNC2*/
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK              0x3
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT             0
-
 struct mxc_usbh_platform_data {
        int (*init)(struct platform_device *pdev);
        int (*exit)(struct platform_device *pdev);
        struct usb_phy          *otg;
 };
 
-int mx51_initialize_usb_hw(int port, unsigned int flags);
-int mx25_initialize_usb_hw(int port, unsigned int flags);
-int mx31_initialize_usb_hw(int port, unsigned int flags);
-int mx35_initialize_usb_hw(int port, unsigned int flags);
-int mx27_initialize_usb_hw(int port, unsigned int flags);
-
 #endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */