#include "e1000.h"
-#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00
-#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL 0x02
-#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL 0x10
-#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE 0x1F
-
-#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS 0x0008
-#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS 0x0800
-#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING 0x0010
-
-#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
-#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000
-#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE 0x2000
-
-#define E1000_KMRNCTRLSTA_OPMODE_MASK 0x000C
-#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO 0x0004
-
-#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
-#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000
-
-#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN 0x8
-#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN 0x9
-
-/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
-#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Reversal Disab. */
-#define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060
-#define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI */
-#define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX */
-#define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Auto crossover */
-
-/* PHY Specific Control Register 2 (Page 0, Register 26) */
-#define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000
- /* 1=Reverse Auto-Negotiation */
-
-/* MAC Specific Control Register (Page 2, Register 21) */
-/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
-#define GG82563_MSCR_TX_CLK_MASK 0x0007
-#define GG82563_MSCR_TX_CLK_10MBPS_2_5 0x0004
-#define GG82563_MSCR_TX_CLK_100MBPS_25 0x0005
-#define GG82563_MSCR_TX_CLK_1000MBPS_25 0x0007
-
-#define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */
-
-/* DSP Distance Register (Page 5, Register 26) */
-#define GG82563_DSPD_CABLE_LENGTH 0x0007 /* 0 = <50M
- 1 = 50-80M
- 2 = 80-110M
- 3 = 110-140M
- 4 = >140M */
-
-/* Kumeran Mode Control Register (Page 193, Register 16) */
-#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800
-
-/* Max number of times Kumeran read/write should be validated */
-#define GG82563_MAX_KMRN_RETRY 0x5
-
-/* Power Management Control Register (Page 193, Register 20) */
-#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001
- /* 1=Enable SERDES Electrical Idle */
-
-/* In-Band Control Register (Page 194, Register 18) */
-#define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding */
+static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_init_mac_params_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw);
+static void e1000_release_phy_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_acquire_nvm_80003es2lan(struct e1000_hw *hw);
+static void e1000_release_nvm_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
+ u32 offset, u16 *data);
+static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
+ u32 offset, u16 data);
+static s32 e1000_write_nvm_80003es2lan(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 e1000_get_cfg_done_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_get_cable_length_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex);
+static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw);
+static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask);
+static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex);
+static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
+ u16 *data);
+static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
+ u16 data);
+static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw);
+static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw);
+static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask);
+static s32 e1000_read_mac_addr_80003es2lan(struct e1000_hw *hw);
+static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw);
/*
* A table for the GG82563 cable length where the range is defined
* "index + 5".
*/
static const u16 e1000_gg82563_cable_length_table[] = {
- 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF };
-#define GG82563_CABLE_LENGTH_TABLE_SIZE \
- ARRAY_SIZE(e1000_gg82563_cable_length_table)
+ 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF
+};
-static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw);
-static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask);
-static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask);
-static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw);
-static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw);
-static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw);
-static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex);
-static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw);
-static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
- u16 *data);
-static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
- u16 data);
-static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw);
+#define GG82563_CABLE_LENGTH_TABLE_SIZE \
+ (sizeof(e1000_gg82563_cable_length_table) / \
+ sizeof(e1000_gg82563_cable_length_table[0]))
/**
* e1000_init_phy_params_80003es2lan - Init ESB2 PHY func ptrs.
s32 ret_val;
if (hw->phy.media_type != e1000_media_type_copper) {
- phy->type = e1000_phy_none;
+ phy->type = e1000_phy_none;
return 0;
} else {
phy->ops.power_up = e1000_power_up_phy_copper;
phy->ops.power_down = e1000_power_down_phy_copper_80003es2lan;
}
- phy->addr = 1;
- phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
- phy->reset_delay_us = 100;
- phy->type = e1000_phy_gg82563;
+ phy->addr = 1;
+ phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+ phy->reset_delay_us = 100;
+ phy->type = e1000_phy_gg82563;
+
+ phy->ops.acquire = e1000_acquire_phy_80003es2lan;
+ phy->ops.check_polarity = e1000_check_polarity_m88;
+ phy->ops.check_reset_block = e1000e_check_reset_block_generic;
+ phy->ops.commit = e1000e_phy_sw_reset;
+ phy->ops.get_cfg_done = e1000_get_cfg_done_80003es2lan;
+ phy->ops.get_info = e1000e_get_phy_info_m88;
+ phy->ops.release = e1000_release_phy_80003es2lan;
+ phy->ops.reset = e1000e_phy_hw_reset_generic;
+ phy->ops.set_d3_lplu_state = e1000e_set_d3_lplu_state;
+
+ phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_80003es2lan;
+ phy->ops.get_cable_length = e1000_get_cable_length_80003es2lan;
+ phy->ops.read_reg = e1000_read_phy_reg_gg82563_80003es2lan;
+ phy->ops.write_reg = e1000_write_phy_reg_gg82563_80003es2lan;
+
+ phy->ops.cfg_on_link_up = e1000_cfg_on_link_up_80003es2lan;
/* This can only be done after all function pointers are setup. */
ret_val = e1000e_get_phy_id(hw);
u32 eecd = er32(EECD);
u16 size;
- nvm->opcode_bits = 8;
- nvm->delay_usec = 1;
+ nvm->opcode_bits = 8;
+ nvm->delay_usec = 1;
switch (nvm->override) {
case e1000_nvm_override_spi_large:
- nvm->page_size = 32;
+ nvm->page_size = 32;
nvm->address_bits = 16;
break;
case e1000_nvm_override_spi_small:
- nvm->page_size = 8;
+ nvm->page_size = 8;
nvm->address_bits = 8;
break;
default:
- nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
+ nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
break;
}
nvm->type = e1000_nvm_eeprom_spi;
size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
- E1000_EECD_SIZE_EX_SHIFT);
+ E1000_EECD_SIZE_EX_SHIFT);
/*
* Added to a constant, "size" becomes the left-shift value
/* EEPROM access above 16k is unsupported */
if (size > 14)
size = 14;
- nvm->word_size = 1 << size;
+ nvm->word_size = 1 << size;
+
+ /* Function Pointers */
+ nvm->ops.acquire = e1000_acquire_nvm_80003es2lan;
+ nvm->ops.read = e1000e_read_nvm_eerd;
+ nvm->ops.release = e1000_release_nvm_80003es2lan;
+ nvm->ops.update = e1000e_update_nvm_checksum_generic;
+ nvm->ops.valid_led_default = e1000e_valid_led_default;
+ nvm->ops.validate = e1000e_validate_nvm_checksum_generic;
+ nvm->ops.write = e1000_write_nvm_80003es2lan;
return 0;
}
/* FWSM register */
mac->has_fwsm = true;
/* ARC supported; valid only if manageability features are enabled. */
- mac->arc_subsystem_valid =
- (er32(FWSM) & E1000_FWSM_MODE_MASK)
- ? true : false;
+ mac->arc_subsystem_valid = !!(er32(FWSM) & E1000_FWSM_MODE_MASK);
/* Adaptive IFS not supported */
mac->adaptive_ifs = false;
+ /* Function pointers */
+
+ /* bus type/speed/width */
+ mac->ops.get_bus_info = e1000e_get_bus_info_pcie;
+ /* reset */
+ mac->ops.reset_hw = e1000_reset_hw_80003es2lan;
+ /* hw initialization */
+ mac->ops.init_hw = e1000_init_hw_80003es2lan;
+ /* link setup */
+ mac->ops.setup_link = e1000e_setup_link_generic;
+ /* check management mode */
+ mac->ops.check_mng_mode = e1000e_check_mng_mode_generic;
+ /* multicast address update */
+ mac->ops.update_mc_addr_list = e1000e_update_mc_addr_list_generic;
+ /* writing VFTA */
+ mac->ops.write_vfta = e1000_write_vfta_generic;
+ /* clearing VFTA */
+ mac->ops.clear_vfta = e1000_clear_vfta_generic;
+ /* read mac address */
+ mac->ops.read_mac_addr = e1000_read_mac_addr_80003es2lan;
+ /* ID LED init */
+ mac->ops.id_led_init = e1000e_id_led_init_generic;
+ /* blink LED */
+ mac->ops.blink_led = e1000e_blink_led_generic;
+ /* setup LED */
+ mac->ops.setup_led = e1000e_setup_led_generic;
+ /* cleanup LED */
+ mac->ops.cleanup_led = e1000e_cleanup_led_generic;
+ /* turn on/off LED */
+ mac->ops.led_on = e1000e_led_on_generic;
+ mac->ops.led_off = e1000e_led_off_generic;
+ /* clear hardware counters */
+ mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_80003es2lan;
+ /* link info */
+ mac->ops.get_link_up_info = e1000_get_link_up_info_80003es2lan;
+
/* set lan id for port to determine which phy lock to use */
hw->mac.ops.set_lan_id(hw);
return 0;
}
-static s32 e1000_get_variants_80003es2lan(struct e1000_adapter *adapter)
+/**
+ * e1000_init_function_pointers_80003es2lan - Init ESB2 func ptrs.
+ * @hw: pointer to the HW structure
+ *
+ * Called to initialize all function pointers and parameters.
+ **/
+void e1000_init_function_pointers_80003es2lan(struct e1000_hw *hw)
{
- struct e1000_hw *hw = &adapter->hw;
- s32 rc;
-
- rc = e1000_init_mac_params_80003es2lan(hw);
- if (rc)
- return rc;
-
- rc = e1000_init_nvm_params_80003es2lan(hw);
- if (rc)
- return rc;
-
- rc = e1000_init_phy_params_80003es2lan(hw);
- if (rc)
- return rc;
-
- return 0;
+ e1000_init_mac_ops_generic(hw);
+ e1000_init_nvm_ops_generic(hw);
+ hw->mac.ops.init_params = e1000_init_mac_params_80003es2lan;
+ hw->nvm.ops.init_params = e1000_init_nvm_params_80003es2lan;
+ hw->phy.ops.init_params = e1000_init_phy_params_80003es2lan;
}
/**
}
/**
- * e1000_acquire_mac_csr_80003es2lan - Acquire rights to access Kumeran register
+ * e1000_acquire_mac_csr_80003es2lan - Acquire right to access Kumeran register
* @hw: pointer to the HW structure
*
* Acquire the semaphore to access the Kumeran interface.
}
/**
- * e1000_release_mac_csr_80003es2lan - Release rights to access Kumeran Register
+ * e1000_release_mac_csr_80003es2lan - Release right to access Kumeran Register
* @hw: pointer to the HW structure
*
* Release the semaphore used to access the Kumeran interface
{
u32 swfw_sync;
+/* *INDENT-OFF* */
while (e1000e_get_hw_semaphore(hw) != 0)
; /* Empty */
+/* *INDENT-ON* */
swfw_sync = er32(SW_FW_SYNC);
swfw_sync &= ~mask;
return ret_val;
}
- if (hw->dev_spec.e80003es2lan.mdic_wa_enable == true) {
+ if (hw->dev_spec.e80003es2lan.mdic_wa_enable) {
/*
* The "ready" bit in the MDIC register may be incorrectly set
* before the device has completed the "Page Select" MDI
udelay(200);
ret_val = e1000e_read_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
udelay(200);
} else {
ret_val = e1000e_read_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
}
e1000_release_phy_80003es2lan(hw);
return ret_val;
}
- if (hw->dev_spec.e80003es2lan.mdic_wa_enable == true) {
+ if (hw->dev_spec.e80003es2lan.mdic_wa_enable) {
/*
* The "ready" bit in the MDIC register may be incorrectly set
* before the device has completed the "Page Select" MDI
udelay(200);
ret_val = e1000e_write_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ MAX_PHY_REG_ADDRESS &
+ offset, data);
udelay(200);
} else {
ret_val = e1000e_write_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ MAX_PHY_REG_ADDRESS &
+ offset, data);
}
e1000_release_phy_80003es2lan(hw);
e_dbg("Waiting for forced speed/duplex link on GG82563 phy.\n");
ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
- 100000, &link);
+ 100000, &link);
if (ret_val)
return ret_val;
/* Try once more */
ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
- 100000, &link);
+ 100000, &link);
if (ret_val)
return ret_val;
}
s32 ret_val;
if (hw->phy.media_type == e1000_media_type_copper) {
- ret_val = e1000e_get_speed_and_duplex_copper(hw,
- speed,
- duplex);
+ ret_val = e1000e_get_speed_and_duplex_copper(hw, speed, duplex);
hw->phy.ops.cfg_on_link_up(hw);
} else {
ret_val = e1000e_get_speed_and_duplex_fiber_serdes(hw,
- speed,
- duplex);
+ speed,
+ duplex);
}
return ret_val;
{
u32 ctrl;
s32 ret_val;
+ u16 kum_reg_data;
/*
* Prevent the PCI-E bus from sticking if there is no TLP connection
ew32(CTRL, ctrl | E1000_CTRL_RST);
e1000_release_phy_80003es2lan(hw);
+ /* Disable IBIST slave mode (far-end loopback) */
+ e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
+ &kum_reg_data);
+ kum_reg_data |= E1000_KMRNCTRLSTA_IBIST_DISABLE;
+ e1000_write_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
+ kum_reg_data);
+
ret_val = e1000e_get_auto_rd_done(hw);
if (ret_val)
/* We don't want to continue accessing MAC registers. */
e1000_initialize_hw_bits_80003es2lan(hw);
/* Initialize identification LED */
- ret_val = e1000e_id_led_init(hw);
+ ret_val = mac->ops.id_led_init(hw);
if (ret_val)
e_dbg("Error initializing identification LED\n");
- /* This is not fatal and we should not stop init due to this */
+ /* This is not fatal and we should not stop init due to this */
/* Disabling VLAN filtering */
e_dbg("Initializing the IEEE VLAN\n");
E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
/* Setup link and flow control */
- ret_val = e1000e_setup_link(hw);
+ ret_val = mac->ops.setup_link(hw);
/* Disable IBIST slave mode (far-end loopback) */
e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
/* Set the transmit descriptor write-back policy */
reg_data = er32(TXDCTL(0));
reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC;
+ E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC;
ew32(TXDCTL(0), reg_data);
/* ...for both queues. */
reg_data = er32(TXDCTL(1));
reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC;
+ E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC;
ew32(TXDCTL(1), reg_data);
/* Enable retransmit on late collisions */
hw->dev_spec.e80003es2lan.mdic_wa_enable = true;
ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET >>
- E1000_KMRNCTRLSTA_OFFSET_SHIFT,
- &i);
+ E1000_KMRNCTRLSTA_OFFSET >>
+ E1000_KMRNCTRLSTA_OFFSET_SHIFT,
+ &i);
if (!ret_val) {
if ((i & E1000_KMRNCTRLSTA_OPMODE_MASK) ==
- E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO)
+ E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO)
hw->dev_spec.e80003es2lan.mdic_wa_enable = false;
}
/* Transmit Arbitration Control 0 */
reg = er32(TARC(0));
- reg &= ~(0xF << 27); /* 30:27 */
+ reg &= ~(0xF << 27); /* 30:27 */
if (hw->phy.media_type != e1000_media_type_copper)
reg &= ~(1 << 20);
ew32(TARC(0), reg);
else
reg |= (1 << 28);
ew32(TARC(1), reg);
+
+ /*
+ * Disable IPv6 extension header parsing because some malformed
+ * IPv6 headers can hang the Rx.
+ */
+ reg = er32(RFCTL);
+ reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS);
+ ew32(RFCTL, reg);
}
/**
/* Bypass Rx and Tx FIFO's */
ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL,
- E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS |
- E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS);
+ E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL,
+ E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS
+ |
+ E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS);
if (ret_val)
return ret_val;
ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
- &data);
+ E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
+ &data);
if (ret_val)
return ret_val;
data |= E1000_KMRNCTRLSTA_OPMODE_E_IDLE;
ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
- data);
+ E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
+ data);
if (ret_val)
return ret_val;
* firmware will have already initialized them. We only initialize
* them if the HW is not in IAMT mode.
*/
- if (!e1000e_check_mng_mode(hw)) {
+ if (!hw->mac.ops.check_mng_mode(hw)) {
/* Enable Electrical Idle on the PHY */
data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE;
ret_val = e1e_wphy(hw, GG82563_PHY_PWR_MGMT_CTRL, data);
* polling the phy; this fixes erroneous timeouts at 10Mbps.
*/
ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 4),
- 0xFFFF);
+ 0xFFFF);
if (ret_val)
return ret_val;
ret_val = e1000_read_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9),
- ®_data);
+ ®_data);
if (ret_val)
return ret_val;
reg_data |= 0x3F;
ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9),
- reg_data);
+ reg_data);
if (ret_val)
return ret_val;
ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_INB_CTRL,
- ®_data);
+ E1000_KMRNCTRLSTA_OFFSET_INB_CTRL,
+ ®_data);
if (ret_val)
return ret_val;
reg_data |= E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING;
ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_INB_CTRL,
- reg_data);
+ E1000_KMRNCTRLSTA_OFFSET_INB_CTRL,
+ reg_data);
if (ret_val)
return ret_val;
if (hw->phy.media_type == e1000_media_type_copper) {
ret_val = e1000e_get_speed_and_duplex_copper(hw, &speed,
- &duplex);
+ &duplex);
if (ret_val)
return ret_val;
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT;
ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
- reg_data);
+ E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
+ reg_data);
if (ret_val)
return ret_val;
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT;
ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
- reg_data);
+ E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
+ reg_data);
if (ret_val)
return ret_val;
return ret_val;
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
- E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
+ E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
ew32(KMRNCTRLSTA, kmrnctrlsta);
e1e_flush();
return ret_val;
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
- E1000_KMRNCTRLSTA_OFFSET) | data;
+ E1000_KMRNCTRLSTA_OFFSET) | data;
ew32(KMRNCTRLSTA, kmrnctrlsta);
e1e_flush();
er32(ICTXQMTC);
er32(ICRXDMTC);
}
-
-static struct e1000_mac_operations es2_mac_ops = {
- .read_mac_addr = e1000_read_mac_addr_80003es2lan,
- .id_led_init = e1000e_id_led_init,
- .blink_led = e1000e_blink_led_generic,
- .check_mng_mode = e1000e_check_mng_mode_generic,
- /* check_for_link dependent on media type */
- .cleanup_led = e1000e_cleanup_led_generic,
- .clear_hw_cntrs = e1000_clear_hw_cntrs_80003es2lan,
- .get_bus_info = e1000e_get_bus_info_pcie,
- .set_lan_id = e1000_set_lan_id_multi_port_pcie,
- .get_link_up_info = e1000_get_link_up_info_80003es2lan,
- .led_on = e1000e_led_on_generic,
- .led_off = e1000e_led_off_generic,
- .update_mc_addr_list = e1000e_update_mc_addr_list_generic,
- .write_vfta = e1000_write_vfta_generic,
- .clear_vfta = e1000_clear_vfta_generic,
- .reset_hw = e1000_reset_hw_80003es2lan,
- .init_hw = e1000_init_hw_80003es2lan,
- .setup_link = e1000e_setup_link,
- /* setup_physical_interface dependent on media type */
- .setup_led = e1000e_setup_led_generic,
-};
-
-static struct e1000_phy_operations es2_phy_ops = {
- .acquire = e1000_acquire_phy_80003es2lan,
- .check_polarity = e1000_check_polarity_m88,
- .check_reset_block = e1000e_check_reset_block_generic,
- .commit = e1000e_phy_sw_reset,
- .force_speed_duplex = e1000_phy_force_speed_duplex_80003es2lan,
- .get_cfg_done = e1000_get_cfg_done_80003es2lan,
- .get_cable_length = e1000_get_cable_length_80003es2lan,
- .get_info = e1000e_get_phy_info_m88,
- .read_reg = e1000_read_phy_reg_gg82563_80003es2lan,
- .release = e1000_release_phy_80003es2lan,
- .reset = e1000e_phy_hw_reset_generic,
- .set_d0_lplu_state = NULL,
- .set_d3_lplu_state = e1000e_set_d3_lplu_state,
- .write_reg = e1000_write_phy_reg_gg82563_80003es2lan,
- .cfg_on_link_up = e1000_cfg_on_link_up_80003es2lan,
-};
-
-static struct e1000_nvm_operations es2_nvm_ops = {
- .acquire = e1000_acquire_nvm_80003es2lan,
- .read = e1000e_read_nvm_eerd,
- .release = e1000_release_nvm_80003es2lan,
- .update = e1000e_update_nvm_checksum_generic,
- .valid_led_default = e1000e_valid_led_default,
- .validate = e1000e_validate_nvm_checksum_generic,
- .write = e1000_write_nvm_80003es2lan,
-};
-
-struct e1000_info e1000_es2_info = {
- .mac = e1000_80003es2lan,
- .flags = FLAG_HAS_HW_VLAN_FILTER
- | FLAG_HAS_JUMBO_FRAMES
- | FLAG_HAS_WOL
- | FLAG_APME_IN_CTRL3
- | FLAG_HAS_CTRLEXT_ON_LOAD
- | FLAG_RX_NEEDS_RESTART /* errata */
- | FLAG_TARC_SET_BIT_ZERO /* errata */
- | FLAG_APME_CHECK_PORT_B
- | FLAG_DISABLE_FC_PAUSE_TIME, /* errata */
- .flags2 = FLAG2_DMA_BURST,
- .pba = 38,
- .max_hw_frame_size = DEFAULT_JUMBO,
- .get_variants = e1000_get_variants_80003es2lan,
- .mac_ops = &es2_mac_ops,
- .phy_ops = &es2_phy_ops,
- .nvm_ops = &es2_nvm_ops,
-};
-
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2012 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_80003ES2LAN_H_
+#define _E1000_80003ES2LAN_H_
+
+#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00
+#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL 0x02
+#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL 0x10
+#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE 0x1F
+
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS 0x0008
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS 0x0800
+#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING 0x0010
+
+#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
+#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000
+#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE 0x2000
+
+#define E1000_KMRNCTRLSTA_OPMODE_MASK 0x000C
+#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO 0x0004
+
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
+#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000
+
+#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN 0x8
+#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN 0x9
+
+/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
+#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Reversal Disabled */
+#define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060
+#define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI */
+#define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX */
+#define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Auto crossover */
+
+/* PHY Specific Control Register 2 (Page 0, Register 26) */
+#define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000 /* 1=Reverse Auto-Nego */
+
+/* MAC Specific Control Register (Page 2, Register 21) */
+/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
+#define GG82563_MSCR_TX_CLK_MASK 0x0007
+#define GG82563_MSCR_TX_CLK_10MBPS_2_5 0x0004
+#define GG82563_MSCR_TX_CLK_100MBPS_25 0x0005
+#define GG82563_MSCR_TX_CLK_1000MBPS_2_5 0x0006
+#define GG82563_MSCR_TX_CLK_1000MBPS_25 0x0007
+
+#define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */
+
+/* DSP Distance Register (Page 5, Register 26) */
+/*
+ * 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-100M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define GG82563_DSPD_CABLE_LENGTH 0x0007
+
+/* Kumeran Mode Control Register (Page 193, Register 16) */
+#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800
+
+/* Max number of times Kumeran read/write should be validated */
+#define GG82563_MAX_KMRN_RETRY 0x5
+
+/* Power Management Control Register (Page 193, Register 20) */
+/* 1=Enable SERDES Electrical Idle */
+#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001
+
+/* In-Band Control Register (Page 194, Register 18) */
+#define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding */
+
+#endif
#include "e1000.h"
-#define ID_LED_RESERVED_F746 0xF746
-#define ID_LED_DEFAULT_82573 ((ID_LED_DEF1_DEF2 << 12) | \
- (ID_LED_OFF1_ON2 << 8) | \
- (ID_LED_DEF1_DEF2 << 4) | \
- (ID_LED_DEF1_DEF2))
-
-#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
-#define AN_RETRY_COUNT 5 /* Autoneg Retry Count value */
-#define E1000_BASE1000T_STATUS 10
-#define E1000_IDLE_ERROR_COUNT_MASK 0xFF
-#define E1000_RECEIVE_ERROR_COUNTER 21
-#define E1000_RECEIVE_ERROR_MAX 0xFFFF
-
-#define E1000_NVM_INIT_CTRL2_MNGM 0x6000 /* Manageability Operation Mode mask */
-
-static s32 e1000_get_phy_id_82571(struct e1000_hw *hw);
-static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw);
-static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw);
-static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw);
-static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
- u16 words, u16 *data);
-static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw);
-static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw);
-static s32 e1000_setup_link_82571(struct e1000_hw *hw);
-static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw);
+static s32 e1000_init_phy_params_82571(struct e1000_hw *hw);
+static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw);
+static s32 e1000_init_mac_params_82571(struct e1000_hw *hw);
+static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw);
+static void e1000_release_nvm_82571(struct e1000_hw *hw);
+static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw);
+static s32 e1000_validate_nvm_checksum_82571(struct e1000_hw *hw);
+static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw);
+static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active);
+static s32 e1000_reset_hw_82571(struct e1000_hw *hw);
+static s32 e1000_init_hw_82571(struct e1000_hw *hw);
static void e1000_clear_vfta_82571(struct e1000_hw *hw);
static bool e1000_check_mng_mode_82574(struct e1000_hw *hw);
static s32 e1000_led_on_82574(struct e1000_hw *hw);
+static s32 e1000_setup_link_82571(struct e1000_hw *hw);
+static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw);
+static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw);
+static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw);
+static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data);
+static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw);
+static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw);
+static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw);
+static s32 e1000_get_phy_id_82571(struct e1000_hw *hw);
static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw);
-static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw);
+static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw);
static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw);
static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw);
static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw);
static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active);
static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active);
+static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw);
+static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw);
+static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw);
/**
* e1000_init_phy_params_82571 - Init PHY func ptrs.
return 0;
}
- phy->addr = 1;
- phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
- phy->reset_delay_us = 100;
+ phy->addr = 1;
+ phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+ phy->reset_delay_us = 100;
- phy->ops.power_up = e1000_power_up_phy_copper;
- phy->ops.power_down = e1000_power_down_phy_copper_82571;
+ phy->ops.check_reset_block = e1000e_check_reset_block_generic;
+ phy->ops.reset = e1000e_phy_hw_reset_generic;
+ phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82571;
+ phy->ops.set_d3_lplu_state = e1000e_set_d3_lplu_state;
+ phy->ops.power_up = e1000_power_up_phy_copper;
+ phy->ops.power_down = e1000_power_down_phy_copper_82571;
switch (hw->mac.type) {
case e1000_82571:
case e1000_82572:
- phy->type = e1000_phy_igp_2;
+ phy->type = e1000_phy_igp_2;
+ phy->ops.get_cfg_done = e1000_get_cfg_done_82571;
+ phy->ops.get_info = e1000e_get_phy_info_igp;
+ phy->ops.check_polarity = e1000_check_polarity_igp;
+ phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_igp;
+ phy->ops.get_cable_length = e1000e_get_cable_length_igp_2;
+ phy->ops.read_reg = e1000e_read_phy_reg_igp;
+ phy->ops.write_reg = e1000e_write_phy_reg_igp;
+ phy->ops.acquire = e1000_get_hw_semaphore_82571;
+ phy->ops.release = e1000_put_hw_semaphore_82571;
break;
case e1000_82573:
- phy->type = e1000_phy_m88;
+ phy->type = e1000_phy_m88;
+ phy->ops.get_cfg_done = e1000e_get_cfg_done;
+ phy->ops.get_info = e1000e_get_phy_info_m88;
+ phy->ops.check_polarity = e1000_check_polarity_m88;
+ phy->ops.commit = e1000e_phy_sw_reset;
+ phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88;
+ phy->ops.get_cable_length = e1000e_get_cable_length_m88;
+ phy->ops.read_reg = e1000e_read_phy_reg_m88;
+ phy->ops.write_reg = e1000e_write_phy_reg_m88;
+ phy->ops.acquire = e1000_get_hw_semaphore_82571;
+ phy->ops.release = e1000_put_hw_semaphore_82571;
break;
case e1000_82574:
case e1000_82583:
- phy->type = e1000_phy_bm;
+ phy->type = e1000_phy_bm;
+ phy->ops.get_cfg_done = e1000e_get_cfg_done;
+ phy->ops.get_info = e1000e_get_phy_info_m88;
+ phy->ops.check_polarity = e1000_check_polarity_m88;
+ phy->ops.commit = e1000e_phy_sw_reset;
+ phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88;
+ phy->ops.get_cable_length = e1000e_get_cable_length_m88;
+ phy->ops.read_reg = e1000e_read_phy_reg_bm2;
+ phy->ops.write_reg = e1000e_write_phy_reg_bm2;
phy->ops.acquire = e1000_get_hw_semaphore_82574;
phy->ops.release = e1000_put_hw_semaphore_82574;
phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82574;
default:
nvm->type = e1000_nvm_eeprom_spi;
size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
- E1000_EECD_SIZE_EX_SHIFT);
+ E1000_EECD_SIZE_EX_SHIFT);
/*
* Added to a constant, "size" becomes the left-shift value
* for setting word_size.
/* EEPROM access above 16k is unsupported */
if (size > 14)
size = 14;
- nvm->word_size = 1 << size;
+ nvm->word_size = 1 << size;
break;
}
nvm->ops.release = e1000_put_hw_semaphore_82574;
break;
default:
+ nvm->ops.acquire = e1000_acquire_nvm_82571;
+ nvm->ops.release = e1000_release_nvm_82571;
break;
}
+ nvm->ops.read = e1000e_read_nvm_eerd;
+ nvm->ops.update = e1000_update_nvm_checksum_82571;
+ nvm->ops.validate = e1000_validate_nvm_checksum_82571;
+ nvm->ops.valid_led_default = e1000_valid_led_default_82571;
+ nvm->ops.write = e1000_write_nvm_82571;
return 0;
}
/* Adaptive IFS supported */
mac->adaptive_ifs = true;
+ /* Function pointers */
+
+ /* bus type/speed/width */
+ mac->ops.get_bus_info = e1000e_get_bus_info_pcie;
+ /* reset */
+ mac->ops.reset_hw = e1000_reset_hw_82571;
+ /* hw initialization */
+ mac->ops.init_hw = e1000_init_hw_82571;
+ /* link setup */
+ mac->ops.setup_link = e1000_setup_link_82571;
+ /* multicast address update */
+ mac->ops.update_mc_addr_list = e1000e_update_mc_addr_list_generic;
+ /* writing VFTA */
+ mac->ops.write_vfta = e1000_write_vfta_generic;
+ /* clearing VFTA */
+ mac->ops.clear_vfta = e1000_clear_vfta_82571;
+ /* read mac address */
+ mac->ops.read_mac_addr = e1000_read_mac_addr_82571;
+ /* ID LED init */
+ mac->ops.id_led_init = e1000e_id_led_init_generic;
+ /* setup LED */
+ mac->ops.setup_led = e1000e_setup_led_generic;
+ /* cleanup LED */
+ mac->ops.cleanup_led = e1000e_cleanup_led_generic;
+ /* turn off LED */
+ mac->ops.led_off = e1000e_led_off_generic;
+ /* clear hardware counters */
+ mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_82571;
+
/* MAC-specific function pointers */
switch (hw->mac.type) {
case e1000_82573:
* ARC supported; valid only if manageability features are
* enabled.
*/
- mac->arc_subsystem_valid =
- (er32(FWSM) & E1000_FWSM_MODE_MASK)
- ? true : false;
+ mac->arc_subsystem_valid = !!(er32(FWSM) &
+ E1000_FWSM_MODE_MASK);
break;
case e1000_82574:
case e1000_82583:
* Initialize device specific counter of SMBI acquisition
* timeouts.
*/
- hw->dev_spec.e82571.smb_counter = 0;
+ hw->dev_spec.e82571.smb_counter = 0;
return 0;
}
-static s32 e1000_get_variants_82571(struct e1000_adapter *adapter)
+/**
+ * e1000_init_function_pointers_82571 - Init func ptrs.
+ * @hw: pointer to the HW structure
+ *
+ * Called to initialize all function pointers and parameters.
+ **/
+void e1000_init_function_pointers_82571(struct e1000_hw *hw)
{
- struct e1000_hw *hw = &adapter->hw;
- static int global_quad_port_a; /* global port a indication */
- struct pci_dev *pdev = adapter->pdev;
- int is_port_b = er32(STATUS) & E1000_STATUS_FUNC_1;
- s32 rc;
-
- rc = e1000_init_mac_params_82571(hw);
- if (rc)
- return rc;
-
- rc = e1000_init_nvm_params_82571(hw);
- if (rc)
- return rc;
-
- rc = e1000_init_phy_params_82571(hw);
- if (rc)
- return rc;
-
- /* tag quad port adapters first, it's used below */
- switch (pdev->device) {
- case E1000_DEV_ID_82571EB_QUAD_COPPER:
- case E1000_DEV_ID_82571EB_QUAD_FIBER:
- case E1000_DEV_ID_82571EB_QUAD_COPPER_LP:
- case E1000_DEV_ID_82571PT_QUAD_COPPER:
- adapter->flags |= FLAG_IS_QUAD_PORT;
- /* mark the first port */
- if (global_quad_port_a == 0)
- adapter->flags |= FLAG_IS_QUAD_PORT_A;
- /* Reset for multiple quad port adapters */
- global_quad_port_a++;
- if (global_quad_port_a == 4)
- global_quad_port_a = 0;
- break;
- default:
- break;
- }
-
- switch (adapter->hw.mac.type) {
- case e1000_82571:
- /* these dual ports don't have WoL on port B at all */
- if (((pdev->device == E1000_DEV_ID_82571EB_FIBER) ||
- (pdev->device == E1000_DEV_ID_82571EB_SERDES) ||
- (pdev->device == E1000_DEV_ID_82571EB_COPPER)) &&
- (is_port_b))
- adapter->flags &= ~FLAG_HAS_WOL;
- /* quad ports only support WoL on port A */
- if (adapter->flags & FLAG_IS_QUAD_PORT &&
- (!(adapter->flags & FLAG_IS_QUAD_PORT_A)))
- adapter->flags &= ~FLAG_HAS_WOL;
- /* Does not support WoL on any port */
- if (pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD)
- adapter->flags &= ~FLAG_HAS_WOL;
- break;
- case e1000_82573:
- if (pdev->device == E1000_DEV_ID_82573L) {
- adapter->flags |= FLAG_HAS_JUMBO_FRAMES;
- adapter->max_hw_frame_size = DEFAULT_JUMBO;
- }
- break;
- default:
- break;
- }
-
- return 0;
+ e1000_init_mac_ops_generic(hw);
+ e1000_init_nvm_ops_generic(hw);
+ hw->mac.ops.init_params = e1000_init_mac_params_82571;
+ hw->nvm.ops.init_params = e1000_init_nvm_params_82571;
+ hw->phy.ops.init_params = e1000_init_phy_params_82571;
}
/**
swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
ew32(SWSM, swsm);
}
+
/**
* e1000_get_hw_semaphore_82573 - Acquire hardware semaphore
* @hw: pointer to the HW structure
/* Check for pending operations. */
for (i = 0; i < E1000_FLASH_UPDATES; i++) {
usleep_range(1000, 2000);
- if ((er32(EECD) & E1000_EECD_FLUPD) == 0)
+ if (!(er32(EECD) & E1000_EECD_FLUPD))
break;
}
for (i = 0; i < E1000_FLASH_UPDATES; i++) {
usleep_range(1000, 2000);
- if ((er32(EECD) & E1000_EECD_FLUPD) == 0)
+ if (!(er32(EECD) & E1000_EECD_FLUPD))
break;
}
for (i = 0; i < words; i++) {
eewr = (data[i] << E1000_NVM_RW_REG_DATA) |
- ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) |
- E1000_NVM_RW_REG_START;
+ ((offset + i) << E1000_NVM_RW_ADDR_SHIFT) |
+ E1000_NVM_RW_REG_START;
ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
if (ret_val)
s32 timeout = PHY_CFG_TIMEOUT;
while (timeout) {
- if (er32(EEMNGCTL) &
- E1000_NVM_CFG_DONE_PORT_0)
+ if (er32(EEMNGCTL) & E1000_NVM_CFG_DONE_PORT_0)
break;
usleep_range(1000, 2000);
timeout--;
* SmartSpeed, so performance is maintained.
*/
if (phy->smart_speed == e1000_smart_speed_on) {
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
+ ret_val = e1e_rphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG, &data);
if (ret_val)
return ret_val;
data |= IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
+ ret_val = e1e_wphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG, data);
if (ret_val)
return ret_val;
} else if (phy->smart_speed == e1000_smart_speed_off) {
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
+ ret_val = e1e_rphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG, &data);
if (ret_val)
return ret_val;
data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
+ ret_val = e1e_wphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG, data);
if (ret_val)
return ret_val;
}
e1000_initialize_hw_bits_82571(hw);
/* Initialize identification LED */
- ret_val = e1000e_id_led_init(hw);
+ ret_val = mac->ops.id_led_init(hw);
if (ret_val)
e_dbg("Error initializing identification LED\n");
- /* This is not fatal and we should not stop init due to this */
+ /* This is not fatal and we should not stop init due to this */
/* Disabling VLAN filtering */
e_dbg("Initializing the IEEE VLAN\n");
E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
/* Setup link and flow control */
- ret_val = e1000_setup_link_82571(hw);
+ ret_val = mac->ops.setup_link(hw);
/* Set the transmit descriptor write-back policy */
reg_data = er32(TXDCTL(0));
reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB |
- E1000_TXDCTL_COUNT_DESC;
+ E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC;
ew32(TXDCTL(0), reg_data);
/* ...for both queues. */
default:
reg_data = er32(TXDCTL(1));
reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB |
- E1000_TXDCTL_COUNT_DESC;
+ E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC;
ew32(TXDCTL(1), reg_data);
break;
}
/* Transmit Arbitration Control 0 */
reg = er32(TARC(0));
- reg &= ~(0xF << 27); /* 30:27 */
+ reg &= ~(0xF << 27); /* 30:27 */
switch (hw->mac.type) {
case e1000_82571:
case e1000_82572:
reg |= E1000_PBA_ECC_CORR_EN;
ew32(PBA_ECC, reg);
}
+
/*
* Workaround for hardware errata.
* Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572
*/
+ if ((hw->mac.type == e1000_82571) || (hw->mac.type == e1000_82572)) {
+ reg = er32(CTRL_EXT);
+ reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN;
+ ew32(CTRL_EXT, reg);
+ }
- if ((hw->mac.type == e1000_82571) ||
- (hw->mac.type == e1000_82572)) {
- reg = er32(CTRL_EXT);
- reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN;
- ew32(CTRL_EXT, reg);
- }
-
+ /*
+ * Disable IPv6 extension header parsing because some malformed
+ * IPv6 headers can hang the Rx.
+ */
+ if (hw->mac.type <= e1000_82573) {
+ reg = er32(RFCTL);
+ reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS);
+ ew32(RFCTL, reg);
+ }
/* PCI-Ex Control Registers */
switch (hw->mac.type) {
*/
vfta_offset = (hw->mng_cookie.vlan_id >>
E1000_VFTA_ENTRY_SHIFT) &
- E1000_VFTA_ENTRY_MASK;
- vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id &
- E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
+ E1000_VFTA_ENTRY_MASK;
+ vfta_bit_in_reg =
+ 1 << (hw->mng_cookie.vlan_id &
+ E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
}
break;
default:
ret_val = e1e_rphy(hw, E1000_RECEIVE_ERROR_COUNTER, &receive_errors);
if (ret_val)
return false;
- if (receive_errors == E1000_RECEIVE_ERROR_MAX) {
+ if (receive_errors == E1000_RECEIVE_ERROR_MAX) {
ret_val = e1e_rphy(hw, E1000_BASE1000T_STATUS, &status_1kbt);
if (ret_val)
return false;
break;
}
- return e1000e_setup_link(hw);
+ return e1000e_setup_link_generic(hw);
}
/**
* If the partner code word is null, stop forcing
* and restart auto negotiation.
*/
- if ((rxcw & E1000_RXCW_C) || !(rxcw & E1000_RXCW_CW)) {
+ if ((rxcw & E1000_RXCW_C) || !(rxcw & E1000_RXCW_CW)) {
/* Enable autoneg, and unforce link up */
ew32(TXCW, mac->txcw);
ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
er32(ICTXQMTC);
er32(ICRXDMTC);
}
-
-static struct e1000_mac_operations e82571_mac_ops = {
- /* .check_mng_mode: mac type dependent */
- /* .check_for_link: media type dependent */
- .id_led_init = e1000e_id_led_init,
- .cleanup_led = e1000e_cleanup_led_generic,
- .clear_hw_cntrs = e1000_clear_hw_cntrs_82571,
- .get_bus_info = e1000e_get_bus_info_pcie,
- .set_lan_id = e1000_set_lan_id_multi_port_pcie,
- /* .get_link_up_info: media type dependent */
- /* .led_on: mac type dependent */
- .led_off = e1000e_led_off_generic,
- .update_mc_addr_list = e1000e_update_mc_addr_list_generic,
- .write_vfta = e1000_write_vfta_generic,
- .clear_vfta = e1000_clear_vfta_82571,
- .reset_hw = e1000_reset_hw_82571,
- .init_hw = e1000_init_hw_82571,
- .setup_link = e1000_setup_link_82571,
- /* .setup_physical_interface: media type dependent */
- .setup_led = e1000e_setup_led_generic,
- .read_mac_addr = e1000_read_mac_addr_82571,
-};
-
-static struct e1000_phy_operations e82_phy_ops_igp = {
- .acquire = e1000_get_hw_semaphore_82571,
- .check_polarity = e1000_check_polarity_igp,
- .check_reset_block = e1000e_check_reset_block_generic,
- .commit = NULL,
- .force_speed_duplex = e1000e_phy_force_speed_duplex_igp,
- .get_cfg_done = e1000_get_cfg_done_82571,
- .get_cable_length = e1000e_get_cable_length_igp_2,
- .get_info = e1000e_get_phy_info_igp,
- .read_reg = e1000e_read_phy_reg_igp,
- .release = e1000_put_hw_semaphore_82571,
- .reset = e1000e_phy_hw_reset_generic,
- .set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
- .set_d3_lplu_state = e1000e_set_d3_lplu_state,
- .write_reg = e1000e_write_phy_reg_igp,
- .cfg_on_link_up = NULL,
-};
-
-static struct e1000_phy_operations e82_phy_ops_m88 = {
- .acquire = e1000_get_hw_semaphore_82571,
- .check_polarity = e1000_check_polarity_m88,
- .check_reset_block = e1000e_check_reset_block_generic,
- .commit = e1000e_phy_sw_reset,
- .force_speed_duplex = e1000e_phy_force_speed_duplex_m88,
- .get_cfg_done = e1000e_get_cfg_done,
- .get_cable_length = e1000e_get_cable_length_m88,
- .get_info = e1000e_get_phy_info_m88,
- .read_reg = e1000e_read_phy_reg_m88,
- .release = e1000_put_hw_semaphore_82571,
- .reset = e1000e_phy_hw_reset_generic,
- .set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
- .set_d3_lplu_state = e1000e_set_d3_lplu_state,
- .write_reg = e1000e_write_phy_reg_m88,
- .cfg_on_link_up = NULL,
-};
-
-static struct e1000_phy_operations e82_phy_ops_bm = {
- .acquire = e1000_get_hw_semaphore_82571,
- .check_polarity = e1000_check_polarity_m88,
- .check_reset_block = e1000e_check_reset_block_generic,
- .commit = e1000e_phy_sw_reset,
- .force_speed_duplex = e1000e_phy_force_speed_duplex_m88,
- .get_cfg_done = e1000e_get_cfg_done,
- .get_cable_length = e1000e_get_cable_length_m88,
- .get_info = e1000e_get_phy_info_m88,
- .read_reg = e1000e_read_phy_reg_bm2,
- .release = e1000_put_hw_semaphore_82571,
- .reset = e1000e_phy_hw_reset_generic,
- .set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
- .set_d3_lplu_state = e1000e_set_d3_lplu_state,
- .write_reg = e1000e_write_phy_reg_bm2,
- .cfg_on_link_up = NULL,
-};
-
-static struct e1000_nvm_operations e82571_nvm_ops = {
- .acquire = e1000_acquire_nvm_82571,
- .read = e1000e_read_nvm_eerd,
- .release = e1000_release_nvm_82571,
- .update = e1000_update_nvm_checksum_82571,
- .valid_led_default = e1000_valid_led_default_82571,
- .validate = e1000_validate_nvm_checksum_82571,
- .write = e1000_write_nvm_82571,
-};
-
-struct e1000_info e1000_82571_info = {
- .mac = e1000_82571,
- .flags = FLAG_HAS_HW_VLAN_FILTER
- | FLAG_HAS_JUMBO_FRAMES
- | FLAG_HAS_WOL
- | FLAG_APME_IN_CTRL3
- | FLAG_HAS_CTRLEXT_ON_LOAD
- | FLAG_HAS_SMART_POWER_DOWN
- | FLAG_RESET_OVERWRITES_LAA /* errata */
- | FLAG_TARC_SPEED_MODE_BIT /* errata */
- | FLAG_APME_CHECK_PORT_B,
- .flags2 = FLAG2_DISABLE_ASPM_L1 /* errata 13 */
- | FLAG2_DMA_BURST,
- .pba = 38,
- .max_hw_frame_size = DEFAULT_JUMBO,
- .get_variants = e1000_get_variants_82571,
- .mac_ops = &e82571_mac_ops,
- .phy_ops = &e82_phy_ops_igp,
- .nvm_ops = &e82571_nvm_ops,
-};
-
-struct e1000_info e1000_82572_info = {
- .mac = e1000_82572,
- .flags = FLAG_HAS_HW_VLAN_FILTER
- | FLAG_HAS_JUMBO_FRAMES
- | FLAG_HAS_WOL
- | FLAG_APME_IN_CTRL3
- | FLAG_HAS_CTRLEXT_ON_LOAD
- | FLAG_TARC_SPEED_MODE_BIT, /* errata */
- .flags2 = FLAG2_DISABLE_ASPM_L1 /* errata 13 */
- | FLAG2_DMA_BURST,
- .pba = 38,
- .max_hw_frame_size = DEFAULT_JUMBO,
- .get_variants = e1000_get_variants_82571,
- .mac_ops = &e82571_mac_ops,
- .phy_ops = &e82_phy_ops_igp,
- .nvm_ops = &e82571_nvm_ops,
-};
-
-struct e1000_info e1000_82573_info = {
- .mac = e1000_82573,
- .flags = FLAG_HAS_HW_VLAN_FILTER
- | FLAG_HAS_WOL
- | FLAG_APME_IN_CTRL3
- | FLAG_HAS_SMART_POWER_DOWN
- | FLAG_HAS_AMT
- | FLAG_HAS_SWSM_ON_LOAD,
- .flags2 = FLAG2_DISABLE_ASPM_L1
- | FLAG2_DISABLE_ASPM_L0S,
- .pba = 20,
- .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN,
- .get_variants = e1000_get_variants_82571,
- .mac_ops = &e82571_mac_ops,
- .phy_ops = &e82_phy_ops_m88,
- .nvm_ops = &e82571_nvm_ops,
-};
-
-struct e1000_info e1000_82574_info = {
- .mac = e1000_82574,
- .flags = FLAG_HAS_HW_VLAN_FILTER
- | FLAG_HAS_MSIX
- | FLAG_HAS_JUMBO_FRAMES
- | FLAG_HAS_WOL
- | FLAG_APME_IN_CTRL3
- | FLAG_HAS_SMART_POWER_DOWN
- | FLAG_HAS_AMT
- | FLAG_HAS_CTRLEXT_ON_LOAD,
- .flags2 = FLAG2_CHECK_PHY_HANG
- | FLAG2_DISABLE_ASPM_L0S
- | FLAG2_NO_DISABLE_RX,
- .pba = 32,
- .max_hw_frame_size = DEFAULT_JUMBO,
- .get_variants = e1000_get_variants_82571,
- .mac_ops = &e82571_mac_ops,
- .phy_ops = &e82_phy_ops_bm,
- .nvm_ops = &e82571_nvm_ops,
-};
-
-struct e1000_info e1000_82583_info = {
- .mac = e1000_82583,
- .flags = FLAG_HAS_HW_VLAN_FILTER
- | FLAG_HAS_WOL
- | FLAG_APME_IN_CTRL3
- | FLAG_HAS_SMART_POWER_DOWN
- | FLAG_HAS_AMT
- | FLAG_HAS_JUMBO_FRAMES
- | FLAG_HAS_CTRLEXT_ON_LOAD,
- .flags2 = FLAG2_DISABLE_ASPM_L0S
- | FLAG2_NO_DISABLE_RX,
- .pba = 32,
- .max_hw_frame_size = DEFAULT_JUMBO,
- .get_variants = e1000_get_variants_82571,
- .mac_ops = &e82571_mac_ops,
- .phy_ops = &e82_phy_ops_bm,
- .nvm_ops = &e82571_nvm_ops,
-};
-
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2012 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_82571_H_
+#define _E1000_82571_H_
+
+#define ID_LED_RESERVED_F746 0xF746
+#define ID_LED_DEFAULT_82573 ((ID_LED_DEF1_DEF2 << 12) | \
+ (ID_LED_OFF1_ON2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+
+#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
+#define AN_RETRY_COUNT 5 /* Autoneg Retry Count value */
+
+/* Intr Throttling - RW */
+#define E1000_EITR_82574(_n) (0x000E8 + (0x4 * (_n)))
+
+#define E1000_EIAC_82574 0x000DC /* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAC_MASK_82574 0x01F00000
+
+/* Manageability Operation Mode mask */
+#define E1000_NVM_INIT_CTRL2_MNGM 0x6000
+
+#define E1000_RXCFGL 0x0B634 /* TimeSync Rx EtherType & Msg Type Reg - RW */
+
+#define E1000_BASE1000T_STATUS 10
+#define E1000_IDLE_ERROR_COUNT_MASK 0xFF
+#define E1000_RECEIVE_ERROR_COUNTER 21
+#define E1000_RECEIVE_ERROR_MAX 0xFFFF
+bool e1000_check_phy_82574(struct e1000_hw *hw);
+bool e1000e_get_laa_state_82571(struct e1000_hw *hw);
+void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state);
+
+#endif
obj-$(CONFIG_E1000E) += e1000e.o
-e1000e-objs := 82571.o ich8lan.o 80003es2lan.o \
- mac.o manage.o nvm.o phy.o \
- param.o ethtool.o netdev.o
-
+e1000e-objs := netdev.o ethtool.o param.o 82571.o ich8lan.o 80003es2lan.o \
+ mac.o nvm.o phy.o manage.o kcompat.o
#ifndef _E1000_DEFINES_H_
#define _E1000_DEFINES_H_
-#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
-#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
-#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
-#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
-#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */
-#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
-#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */
-#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
-#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
-#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */
-#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
-#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */
-#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */
-#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */
-#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */
-#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
-#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
-#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
-
/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
#define REQ_TX_DESCRIPTOR_MULTIPLE 8
#define REQ_RX_DESCRIPTOR_MULTIPLE 8
/* Definitions for power management and wakeup registers */
/* Wake Up Control */
-#define E1000_WUC_APME 0x00000001 /* APM Enable */
-#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
-#define E1000_WUC_PHY_WAKE 0x00000100 /* if PHY supports wakeup */
+#define E1000_WUC_APME 0x00000001 /* APM Enable */
+#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
+#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */
+#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */
+#define E1000_WUC_LSCWE 0x00000010 /* Link Status wake up enable */
+#define E1000_WUC_LSCWO 0x00000020 /* Link Status wake up override */
+#define E1000_WUC_SPM 0x80000000 /* Enable SPM */
+#define E1000_WUC_PHY_WAKE 0x00000100 /* if PHY supports wakeup */
+#define E1000_WUC_FLX6_PHY 0x4000 /* Flexible Filter 6 Enable */
+#define E1000_WUC_FLX7_PHY 0x8000 /* Flexible Filter 7 Enable */
/* Wake Up Filter Control */
-#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
-#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
-#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
-#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
-#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
-#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
+#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
+#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
+#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
+#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
+#define E1000_WUFC_IGNORE_TCO_PHY 0x00000800 /* Ignore WakeOn TCO packets */
+#define E1000_WUFC_FLX0_PHY 0x00001000 /* Flexible Filter 0 Enable */
+#define E1000_WUFC_FLX1_PHY 0x00002000 /* Flexible Filter 1 Enable */
+#define E1000_WUFC_FLX2_PHY 0x00004000 /* Flexible Filter 2 Enable */
+#define E1000_WUFC_FLX3_PHY 0x00008000 /* Flexible Filter 3 Enable */
+#define E1000_WUFC_FLX4_PHY 0x00000200 /* Flexible Filter 4 Enable */
+#define E1000_WUFC_FLX5_PHY 0x00000400 /* Flexible Filter 5 Enable */
+#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */
+#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
+#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
+#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
+#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
+#define E1000_WUFC_FLX4 0x00100000 /* Flexible Filter 4 Enable */
+#define E1000_WUFC_FLX5 0x00200000 /* Flexible Filter 5 Enable */
+#define E1000_WUFC_FLX6 0x00400000 /* Flexible Filter 6 Enable */
+#define E1000_WUFC_FLX7 0x00800000 /* Flexible Filter 7 Enable */
+#define E1000_WUFC_ALL_FILTERS_PHY_4 0x0000F0FF /* wakeup filters mask */
+#define E1000_WUFC_FLX_OFFSET_PHY 12 /* Flexible Filters bits offset */
+#define E1000_WUFC_FLX_FILTERS_PHY_4 0x0000F000 /* 4 flexible filters mask */
+#define E1000_WUFC_ALL_FILTERS_PHY_6 0x0000F6FF /* 6 wakeup filters mask */
+#define E1000_WUFC_FLX_FILTERS_PHY_6 0x0000F600 /* 6 flexible filters mask */
+#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* all wakeup filters mask */
+#define E1000_WUFC_ALL_FILTERS_6 0x003F00FF /* Mask all 6 wu filters */
+#define E1000_WUFC_ALL_FILTERS_8 0x00FF00FF /* Mask all 8 wu filters */
+#define E1000_WUFC_FLX_OFFSET 16 /* Flexible Filters bits offset */
+#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* 4 flexible filters mask */
+#define E1000_WUFC_FLX_FILTERS_6 0x003F0000 /* 6 flexible filters mask */
+#define E1000_WUFC_FLX_FILTERS_8 0x00FF0000 /* 8 flexible filters mask */
/* Wake Up Status */
-#define E1000_WUS_LNKC E1000_WUFC_LNKC
-#define E1000_WUS_MAG E1000_WUFC_MAG
-#define E1000_WUS_EX E1000_WUFC_EX
-#define E1000_WUS_MC E1000_WUFC_MC
-#define E1000_WUS_BC E1000_WUFC_BC
+#define E1000_WUS_LNKC E1000_WUFC_LNKC
+#define E1000_WUS_MAG E1000_WUFC_MAG
+#define E1000_WUS_EX E1000_WUFC_EX
+#define E1000_WUS_MC E1000_WUFC_MC
+#define E1000_WUS_BC E1000_WUFC_BC
+#define E1000_WUS_ARP E1000_WUFC_ARP
+#define E1000_WUS_IPV4 E1000_WUFC_IPV4
+#define E1000_WUS_IPV6 E1000_WUFC_IPV6
+#define E1000_WUS_FLX0_PHY E1000_WUFC_FLX0_PHY
+#define E1000_WUS_FLX1_PHY E1000_WUFC_FLX1_PHY
+#define E1000_WUS_FLX2_PHY E1000_WUFC_FLX2_PHY
+#define E1000_WUS_FLX3_PHY E1000_WUFC_FLX3_PHY
+#define E1000_WUS_FLX_FILTERS_PHY_4 E1000_WUFC_FLX_FILTERS_PHY_4
+#define E1000_WUS_FLX0 E1000_WUFC_FLX0
+#define E1000_WUS_FLX1 E1000_WUFC_FLX1
+#define E1000_WUS_FLX2 E1000_WUFC_FLX2
+#define E1000_WUS_FLX3 E1000_WUFC_FLX3
+#define E1000_WUS_FLX4 E1000_WUFC_FLX4
+#define E1000_WUS_FLX5 E1000_WUFC_FLX5
+#define E1000_WUS_FLX6 E1000_WUFC_FLX6
+#define E1000_WUS_FLX7 E1000_WUFC_FLX7
+#define E1000_WUS_FLX4_PHY E1000_WUFC_FLX4_PHY
+#define E1000_WUS_FLX5_PHY E1000_WUFC_FLX5_PHY
+#define E1000_WUS_FLX6_PHY 0x0400
+#define E1000_WUS_FLX7_PHY 0x0800
+#define E1000_WUS_FLX_FILTERS E1000_WUFC_FLX_FILTERS
+#define E1000_WUS_FLX_FILTERS_6 E1000_WUFC_FLX_FILTERS_6
+#define E1000_WUS_FLX_FILTERS_8 E1000_WUFC_FLX_FILTERS_8
+#define E1000_WUS_FLX_FILTERS_PHY_6 E1000_WUFC_FLX_FILTERS_PHY_6
+
+/* Wake Up Packet Length */
+#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */
+
+/* Four Flexible Filters are supported */
+#define E1000_FLEXIBLE_FILTER_COUNT_MAX 4
+/* Six Flexible Filters are supported */
+#define E1000_FLEXIBLE_FILTER_COUNT_MAX_6 6
+/* Eight Flexible Filters are supported */
+#define E1000_FLEXIBLE_FILTER_COUNT_MAX_8 8
+
+/* Each Flexible Filter is at most 128 (0x80) bytes in length */
+#define E1000_FLEXIBLE_FILTER_SIZE_MAX 128
+
+#define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX
+#define E1000_FFLT_SIZE_6 E1000_FLEXIBLE_FILTER_COUNT_MAX_6
+#define E1000_FFLT_SIZE_8 E1000_FLEXIBLE_FILTER_COUNT_MAX_8
+#define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
+#define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
/* Extended Device Control */
-#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Definable Pin 3 */
-#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
-#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
-#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
-#define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clock Gating */
-#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
-#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
-#define E1000_CTRL_EXT_EIAME 0x01000000
-#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
-#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
-#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
-#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
-#define E1000_CTRL_EXT_LSECCK 0x00001000
-#define E1000_CTRL_EXT_PHYPDEN 0x00100000
+#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */
+#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */
+#define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN
+#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */
+#define E1000_CTRL_EXT_LPCD 0x00000004 /* LCD Power Cycle Done */
+#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */
+/* Reserved (bits 4,5) in >= 82575 */
+#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* SW Definable Pin 4 data */
+#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* SW Definable Pin 5 data */
+#define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA
+#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* SW Definable Pin 6 data */
+#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* SW Definable Pin 3 data */
+/* SDP 4/5 (bits 8,9) are reserved in >= 82575 */
+#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */
+#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */
+#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */
+#define E1000_CTRL_EXT_SDP3_DIR 0x00000800 /* Direction of SDP3 0=in 1=out */
+#define E1000_CTRL_EXT_FORCE_SMBUS 0x00000800 /* Force SMBus mode */
+#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */
+#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
+#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */
+#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
+#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
+#define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clk Gating */
+#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
+/* Offset of the link mode field in Ctrl Ext register */
+#define E1000_CTRL_EXT_LINK_MODE_OFFSET 22
+#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
+#define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_KMRN 0x00000000
+#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_PCIX_SERDES 0x00800000
+#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000
+#define E1000_CTRL_EXT_EIAME 0x01000000
+#define E1000_CTRL_EXT_IRCA 0x00000001
+#define E1000_CTRL_EXT_WR_WMARK_MASK 0x03000000
+#define E1000_CTRL_EXT_WR_WMARK_256 0x00000000
+#define E1000_CTRL_EXT_WR_WMARK_320 0x01000000
+#define E1000_CTRL_EXT_WR_WMARK_384 0x02000000
+#define E1000_CTRL_EXT_WR_WMARK_448 0x03000000
+#define E1000_CTRL_EXT_CANC 0x04000000 /* Int delay cancellation */
+#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Drv loaded bit for FW */
+/* IAME enable bit (27) was removed in >= 82575 */
+#define E1000_CTRL_EXT_IAME 0x08000000 /* Int ACK Auto-mask */
+/* packet buffer parity error detection enabled */
+#define E1000_CRTL_EXT_PB_PAREN 0x01000000
+/* descriptor FIFO parity error detection enable */
+#define E1000_CTRL_EXT_DF_PAREN 0x02000000
+#define E1000_CTRL_EXT_GHOST_PAREN 0x40000000
+#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
+#define E1000_CTRL_EXT_LSECCK 0x00001000
+#define E1000_CTRL_EXT_PHYPDEN 0x00100000
+#define E1000_I2CCMD_REG_ADDR_SHIFT 16
+#define E1000_I2CCMD_REG_ADDR 0x00FF0000
+#define E1000_I2CCMD_PHY_ADDR_SHIFT 24
+#define E1000_I2CCMD_PHY_ADDR 0x07000000
+#define E1000_I2CCMD_OPCODE_READ 0x08000000
+#define E1000_I2CCMD_OPCODE_WRITE 0x00000000
+#define E1000_I2CCMD_RESET 0x10000000
+#define E1000_I2CCMD_READY 0x20000000
+#define E1000_I2CCMD_INTERRUPT_ENA 0x40000000
+#define E1000_I2CCMD_ERROR 0x80000000
+#define E1000_I2CCMD_SFP_DATA_ADDR(a) (0x0000 + (a))
+#define E1000_I2CCMD_SFP_DIAG_ADDR(a) (0x0100 + (a))
+#define E1000_MAX_SGMII_PHY_REG_ADDR 255
+#define E1000_I2CCMD_PHY_TIMEOUT 200
/* Receive Descriptor bit definitions */
-#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
-#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
-#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
-#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
-#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
-#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
-#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
-#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
-#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
-#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
-#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
-#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
-#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
-
-#define E1000_RXDEXT_STATERR_CE 0x01000000
-#define E1000_RXDEXT_STATERR_SE 0x02000000
-#define E1000_RXDEXT_STATERR_SEQ 0x04000000
-#define E1000_RXDEXT_STATERR_CXE 0x10000000
-#define E1000_RXDEXT_STATERR_RXE 0x80000000
+#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
+#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
+#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
+#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
+#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
+#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */
+#define E1000_RXD_STAT_CRCV 0x100 /* Speculative CRC Valid */
+#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */
+#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */
+#define E1000_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */
+#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */
+#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
+#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
+#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
+#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
+#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
+#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */
+#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
+#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
+#define E1000_RXD_SPC_PRI_SHIFT 13
+#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */
+#define E1000_RXD_SPC_CFI_SHIFT 12
+
+#define E1000_RXDEXT_STATERR_LB 0x00040000
+#define E1000_RXDEXT_STATERR_CE 0x01000000
+#define E1000_RXDEXT_STATERR_SE 0x02000000
+#define E1000_RXDEXT_STATERR_SEQ 0x04000000
+#define E1000_RXDEXT_STATERR_CXE 0x10000000
+#define E1000_RXDEXT_STATERR_TCPE 0x20000000
+#define E1000_RXDEXT_STATERR_IPE 0x40000000
+#define E1000_RXDEXT_STATERR_RXE 0x80000000
+
+#define E1000_RXDEXT_LSECH 0x01000000
+#define E1000_RXDEXT_LSECE_MASK 0x60000000
+#define E1000_RXDEXT_LSECE_NO_ERROR 0x00000000
+#define E1000_RXDEXT_LSECE_NO_SA_MATCH 0x20000000
+#define E1000_RXDEXT_LSECE_REPLAY_DETECT 0x40000000
+#define E1000_RXDEXT_LSECE_BAD_SIG 0x60000000
/* mask to determine if packets should be dropped due to frame errors */
#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
- E1000_RXD_ERR_CE | \
- E1000_RXD_ERR_SE | \
- E1000_RXD_ERR_SEQ | \
- E1000_RXD_ERR_CXE | \
- E1000_RXD_ERR_RXE)
+ E1000_RXD_ERR_CE | \
+ E1000_RXD_ERR_SE | \
+ E1000_RXD_ERR_SEQ | \
+ E1000_RXD_ERR_CXE | \
+ E1000_RXD_ERR_RXE)
/* Same mask, but for extended and packet split descriptors */
#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
- E1000_RXDEXT_STATERR_CE | \
- E1000_RXDEXT_STATERR_SE | \
- E1000_RXDEXT_STATERR_SEQ | \
- E1000_RXDEXT_STATERR_CXE | \
- E1000_RXDEXT_STATERR_RXE)
-
-#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000
-#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
-#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000
-#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000
-#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000
-#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
-
-#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000
+ E1000_RXDEXT_STATERR_CE | \
+ E1000_RXDEXT_STATERR_SE | \
+ E1000_RXDEXT_STATERR_SEQ | \
+ E1000_RXDEXT_STATERR_CXE | \
+ E1000_RXDEXT_STATERR_RXE)
+
+#define E1000_MRQC_ENABLE_MASK 0x00000007
+#define E1000_MRQC_ENABLE_RSS_2Q 0x00000001
+#define E1000_MRQC_ENABLE_RSS_INT 0x00000004
+#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000
+#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
+#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000
+#define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000
+#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
+
+#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000
+#define E1000_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF
/* Management Control */
-#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
-#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
-#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
-#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
-#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
+#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
+#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
+#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */
+#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */
+#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */
+#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */
+#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */
+#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */
+#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
+/* Enable Neighbor Discovery Filtering */
+#define E1000_MANC_NEIGHBOR_EN 0x00004000
+#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */
+#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */
+#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
+#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */
+#define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */
+#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
/* Enable MAC address filtering */
-#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000
+#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000
/* Enable MNG packets to host memory */
-#define E1000_MANC_EN_MNG2HOST 0x00200000
-
-#define E1000_MANC2H_PORT_623 0x00000020 /* Port 0x26f */
-#define E1000_MANC2H_PORT_664 0x00000040 /* Port 0x298 */
-#define E1000_MDEF_PORT_623 0x00000800 /* Port 0x26f */
-#define E1000_MDEF_PORT_664 0x00000400 /* Port 0x298 */
+#define E1000_MANC_EN_MNG2HOST 0x00200000
+/* Enable IP address filtering */
+#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000
+#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Ena checksum filtering */
+#define E1000_MANC_BR_EN 0x01000000 /* Ena broadcast filtering */
+#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */
+#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */
+#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */
+#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */
+#define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */
+#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */
+
+#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */
+#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */
+
+#define E1000_MANC2H_PORT_623 0x00000020 /* Port 0x26f */
+#define E1000_MANC2H_PORT_664 0x00000040 /* Port 0x298 */
+#define E1000_MDEF_PORT_623 0x00000800 /* Port 0x26f */
+#define E1000_MDEF_PORT_664 0x00000400 /* Port 0x298 */
/* Receive Control */
-#define E1000_RCTL_EN 0x00000002 /* enable */
-#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
-#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
-#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
-#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
-#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
-#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
-#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
-#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */
-#define E1000_RCTL_RDMTS_HALF 0x00000000 /* Rx desc min threshold size */
-#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
-#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */
-#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
+#define E1000_RCTL_RST 0x00000001 /* Software reset */
+#define E1000_RCTL_EN 0x00000002 /* enable */
+#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
+#define E1000_RCTL_UPE 0x00000008 /* unicast promisc enable */
+#define E1000_RCTL_MPE 0x00000010 /* multicast promisc enable */
+#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
+#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
+#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
+#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */
+#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
+#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */
+#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */
+#define E1000_RCTL_RDMTS_HALF 0x00000000 /* Rx desc min thresh size */
+#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* Rx desc min thresh size */
+#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* Rx desc min thresh size */
+#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
+#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */
+#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */
+#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */
+#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */
+#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */
+#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
-#define E1000_RCTL_SZ_2048 0x00000000 /* Rx buffer size 2048 */
-#define E1000_RCTL_SZ_1024 0x00010000 /* Rx buffer size 1024 */
-#define E1000_RCTL_SZ_512 0x00020000 /* Rx buffer size 512 */
-#define E1000_RCTL_SZ_256 0x00030000 /* Rx buffer size 256 */
+#define E1000_RCTL_SZ_2048 0x00000000 /* Rx buffer size 2048 */
+#define E1000_RCTL_SZ_1024 0x00010000 /* Rx buffer size 1024 */
+#define E1000_RCTL_SZ_512 0x00020000 /* Rx buffer size 512 */
+#define E1000_RCTL_SZ_256 0x00030000 /* Rx buffer size 256 */
/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
-#define E1000_RCTL_SZ_16384 0x00010000 /* Rx buffer size 16384 */
-#define E1000_RCTL_SZ_8192 0x00020000 /* Rx buffer size 8192 */
-#define E1000_RCTL_SZ_4096 0x00030000 /* Rx buffer size 4096 */
-#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
-#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
-#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */
-#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
-#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
-#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
+#define E1000_RCTL_SZ_16384 0x00010000 /* Rx buffer size 16384 */
+#define E1000_RCTL_SZ_8192 0x00020000 /* Rx buffer size 8192 */
+#define E1000_RCTL_SZ_4096 0x00030000 /* Rx buffer size 4096 */
+#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
+#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
+#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */
+#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */
+#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
+#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
+#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
+#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */
+#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */
/*
* Use byte values for the following shift parameters
* Usage:
* psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
- * E1000_PSRCTL_BSIZE0_MASK) |
- * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
- * E1000_PSRCTL_BSIZE1_MASK) |
- * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
- * E1000_PSRCTL_BSIZE2_MASK) |
- * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
- * E1000_PSRCTL_BSIZE3_MASK))
+ * E1000_PSRCTL_BSIZE0_MASK) |
+ * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
+ * E1000_PSRCTL_BSIZE1_MASK) |
+ * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
+ * E1000_PSRCTL_BSIZE2_MASK) |
+ * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
+ * E1000_PSRCTL_BSIZE3_MASK))
* where value0 = [128..16256], default=256
* value1 = [1024..64512], default=4096
* value2 = [0..64512], default=4096
* value3 = [0..64512], default=0
*/
-#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
-#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
-#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
-#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
+#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
+#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
+#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
+#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
-#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
-#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
-#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
-#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
+#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
+#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
+#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
+#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
/* SWFW_SYNC Definitions */
-#define E1000_SWFW_EEP_SM 0x1
-#define E1000_SWFW_PHY0_SM 0x2
-#define E1000_SWFW_PHY1_SM 0x4
-#define E1000_SWFW_CSR_SM 0x8
+#define E1000_SWFW_EEP_SM 0x01
+#define E1000_SWFW_PHY0_SM 0x02
+#define E1000_SWFW_PHY1_SM 0x04
+#define E1000_SWFW_CSR_SM 0x08
+/* FACTPS Definitions */
+#define E1000_FACTPS_LFS 0x40000000 /* LAN Function Select */
/* Device Control */
-#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
-#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
-#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
-#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
-#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
-#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
-#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
-#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */
-#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
-#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
-#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
-#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
-#define E1000_CTRL_LANPHYPC_OVERRIDE 0x00010000 /* SW control of LANPHYPC */
-#define E1000_CTRL_LANPHYPC_VALUE 0x00020000 /* SW value of LANPHYPC */
-#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
-#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
-#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
-#define E1000_CTRL_RST 0x04000000 /* Global reset */
-#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
-#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
-#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
-#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
+#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
+#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */
+#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */
+#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master reqs */
+#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
+#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */
+#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */
+#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
+#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
+#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
+#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
+#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */
+#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
+#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
+#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */
+#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
+#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
+#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */
+/* Defined polarity of Dock/Undock indication in SDP[0] */
+#define E1000_CTRL_D_UD_POLARITY 0x00004000
+/* Reset both PHY ports, through PHYRST_N pin */
+#define E1000_CTRL_FORCE_PHY_RESET 0x00008000
+/* enable link status from external LINK_0 and LINK_1 pins */
+#define E1000_CTRL_EXT_LINK_EN 0x00010000
+#define E1000_CTRL_LANPHYPC_OVERRIDE 0x00010000 /* SW control of LANPHYPC */
+#define E1000_CTRL_LANPHYPC_VALUE 0x00020000 /* SW value of LANPHYPC */
+#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
+#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
+#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */
+#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */
+#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
+#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */
+#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */
+#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */
+#define E1000_CTRL_RST 0x04000000 /* Global reset */
+#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
+#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
+#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */
+#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
+#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
+#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to ME */
+#define E1000_CTRL_I2C_ENA 0x02000000 /* I2C enable */
/*
* Bit definitions for the Management Data IO (MDIO) and Management Data
* Clock (MDC) pins in the Device Control Register.
*/
+#define E1000_CTRL_PHY_RESET_DIR E1000_CTRL_SWDPIO0
+#define E1000_CTRL_PHY_RESET E1000_CTRL_SWDPIN0
+#define E1000_CTRL_MDIO_DIR E1000_CTRL_SWDPIO2
+#define E1000_CTRL_MDIO E1000_CTRL_SWDPIN2
+#define E1000_CTRL_MDC_DIR E1000_CTRL_SWDPIO3
+#define E1000_CTRL_MDC E1000_CTRL_SWDPIN3
+#define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR
+#define E1000_CTRL_PHY_RESET4 E1000_CTRL_EXT_SDP4_DATA
+
+#define E1000_CONNSW_ENRGSRC 0x4
+#define E1000_PCS_CFG_PCS_EN 8
+#define E1000_PCS_LCTL_FLV_LINK_UP 1
+#define E1000_PCS_LCTL_FSV_10 0
+#define E1000_PCS_LCTL_FSV_100 2
+#define E1000_PCS_LCTL_FSV_1000 4
+#define E1000_PCS_LCTL_FDV_FULL 8
+#define E1000_PCS_LCTL_FSD 0x10
+#define E1000_PCS_LCTL_FORCE_LINK 0x20
+#define E1000_PCS_LCTL_LOW_LINK_LATCH 0x40
+#define E1000_PCS_LCTL_FORCE_FCTRL 0x80
+#define E1000_PCS_LCTL_AN_ENABLE 0x10000
+#define E1000_PCS_LCTL_AN_RESTART 0x20000
+#define E1000_PCS_LCTL_AN_TIMEOUT 0x40000
+#define E1000_PCS_LCTL_AN_SGMII_BYPASS 0x80000
+#define E1000_PCS_LCTL_AN_SGMII_TRIGGER 0x100000
+#define E1000_PCS_LCTL_FAST_LINK_TIMER 0x1000000
+#define E1000_PCS_LCTL_LINK_OK_FIX 0x2000000
+#define E1000_PCS_LCTL_CRS_ON_NI 0x4000000
+#define E1000_ENABLE_SERDES_LOOPBACK 0x0410
+
+#define E1000_PCS_LSTS_LINK_OK 1
+#define E1000_PCS_LSTS_SPEED_10 0
+#define E1000_PCS_LSTS_SPEED_100 2
+#define E1000_PCS_LSTS_SPEED_1000 4
+#define E1000_PCS_LSTS_DUPLEX_FULL 8
+#define E1000_PCS_LSTS_SYNK_OK 0x10
+#define E1000_PCS_LSTS_AN_COMPLETE 0x10000
+#define E1000_PCS_LSTS_AN_PAGE_RX 0x20000
+#define E1000_PCS_LSTS_AN_TIMED_OUT 0x40000
+#define E1000_PCS_LSTS_AN_REMOTE_FAULT 0x80000
+#define E1000_PCS_LSTS_AN_ERROR_RWS 0x100000
/* Device Status */
-#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
-#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
-#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
-#define E1000_STATUS_FUNC_SHIFT 2
-#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
-#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
-#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
-#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
-#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
-#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */
-#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */
-#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
+#define E1000_STATUS_FD 0x00000001 /* Duplex 0=half 1=full */
+#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
+#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
+#define E1000_STATUS_FUNC_SHIFT 2
+#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */
+#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
+#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
+#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */
+#define E1000_STATUS_SPEED_MASK 0x000000C0
+#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
+#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
+#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Compltn by NVM */
+#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
+#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */
+/* Change in Dock/Undock state clear on write '0'. */
+#define E1000_STATUS_DOCK_CI 0x00000800
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Master request status */
+#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */
+#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */
+#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
+#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */
+#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */
+#define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disbld */
+#define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */
+#define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */
+#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */
+/* BMC external code execution disabled */
+#define E1000_STATUS_BMC_LITE 0x01000000
+#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */
+#define E1000_STATUS_FUSE_8 0x04000000
+#define E1000_STATUS_FUSE_9 0x08000000
+#define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disbld on port 0 */
+#define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disbld on port 1 */
/* Constants used to interpret the masked PCI-X bus speed. */
+#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus spd 50-66MHz */
+#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus spd 66-100MHz */
+#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus spd 100-133MHz */
-#define HALF_DUPLEX 1
-#define FULL_DUPLEX 2
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+#define PHY_FORCE_TIME 20
-#define ADVERTISE_10_HALF 0x0001
-#define ADVERTISE_10_FULL 0x0002
-#define ADVERTISE_100_HALF 0x0004
-#define ADVERTISE_100_FULL 0x0008
-#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */
-#define ADVERTISE_1000_FULL 0x0020
+#define ADVERTISE_10_HALF 0x0001
+#define ADVERTISE_10_FULL 0x0002
+#define ADVERTISE_100_HALF 0x0004
+#define ADVERTISE_100_FULL 0x0008
+#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */
+#define ADVERTISE_1000_FULL 0x0020
/* 1000/H is not supported, nor spec-compliant. */
-#define E1000_ALL_SPEED_DUPLEX ( ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
- ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
- ADVERTISE_1000_FULL)
-#define E1000_ALL_NOT_GIG ( ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
- ADVERTISE_100_HALF | ADVERTISE_100_FULL)
-#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL)
-#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL)
-#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF)
-
-#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX
+#define E1000_ALL_SPEED_DUPLEX ( \
+ ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \
+ ADVERTISE_100_FULL | ADVERTISE_1000_FULL)
+#define E1000_ALL_NOT_GIG ( \
+ ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \
+ ADVERTISE_100_FULL)
+#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL)
+#define E1000_ALL_FULL_DUPLEX ( \
+ ADVERTISE_10_FULL | ADVERTISE_100_FULL | ADVERTISE_1000_FULL)
+#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF)
+
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX
/* LED Control */
-#define E1000_PHY_LED0_MODE_MASK 0x00000007
-#define E1000_PHY_LED0_IVRT 0x00000008
-#define E1000_PHY_LED0_MASK 0x0000001F
-
-#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
-#define E1000_LEDCTL_LED0_MODE_SHIFT 0
-#define E1000_LEDCTL_LED0_IVRT 0x00000040
-#define E1000_LEDCTL_LED0_BLINK 0x00000080
-
-#define E1000_LEDCTL_MODE_LINK_UP 0x2
-#define E1000_LEDCTL_MODE_LED_ON 0xE
-#define E1000_LEDCTL_MODE_LED_OFF 0xF
+#define E1000_PHY_LED0_MODE_MASK 0x00000007
+#define E1000_PHY_LED0_IVRT 0x00000008
+#define E1000_PHY_LED0_BLINK 0x00000010
+#define E1000_PHY_LED0_MASK 0x0000001F
+
+#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
+#define E1000_LEDCTL_LED0_MODE_SHIFT 0
+#define E1000_LEDCTL_LED0_BLINK_RATE 0x00000020
+#define E1000_LEDCTL_LED0_IVRT 0x00000040
+#define E1000_LEDCTL_LED0_BLINK 0x00000080
+#define E1000_LEDCTL_LED1_MODE_MASK 0x00000F00
+#define E1000_LEDCTL_LED1_MODE_SHIFT 8
+#define E1000_LEDCTL_LED1_BLINK_RATE 0x00002000
+#define E1000_LEDCTL_LED1_IVRT 0x00004000
+#define E1000_LEDCTL_LED1_BLINK 0x00008000
+#define E1000_LEDCTL_LED2_MODE_MASK 0x000F0000
+#define E1000_LEDCTL_LED2_MODE_SHIFT 16
+#define E1000_LEDCTL_LED2_BLINK_RATE 0x00200000
+#define E1000_LEDCTL_LED2_IVRT 0x00400000
+#define E1000_LEDCTL_LED2_BLINK 0x00800000
+#define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000
+#define E1000_LEDCTL_LED3_MODE_SHIFT 24
+#define E1000_LEDCTL_LED3_BLINK_RATE 0x20000000
+#define E1000_LEDCTL_LED3_IVRT 0x40000000
+#define E1000_LEDCTL_LED3_BLINK 0x80000000
+
+#define E1000_LEDCTL_MODE_LINK_10_1000 0x0
+#define E1000_LEDCTL_MODE_LINK_100_1000 0x1
+#define E1000_LEDCTL_MODE_LINK_UP 0x2
+#define E1000_LEDCTL_MODE_ACTIVITY 0x3
+#define E1000_LEDCTL_MODE_LINK_ACTIVITY 0x4
+#define E1000_LEDCTL_MODE_LINK_10 0x5
+#define E1000_LEDCTL_MODE_LINK_100 0x6
+#define E1000_LEDCTL_MODE_LINK_1000 0x7
+#define E1000_LEDCTL_MODE_PCIX_MODE 0x8
+#define E1000_LEDCTL_MODE_FULL_DUPLEX 0x9
+#define E1000_LEDCTL_MODE_COLLISION 0xA
+#define E1000_LEDCTL_MODE_BUS_SPEED 0xB
+#define E1000_LEDCTL_MODE_BUS_SIZE 0xC
+#define E1000_LEDCTL_MODE_PAUSED 0xD
+#define E1000_LEDCTL_MODE_LED_ON 0xE
+#define E1000_LEDCTL_MODE_LED_OFF 0xF
/* Transmit Descriptor bit definitions */
-#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */
-#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
-#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
-#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
-#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
-#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */
-#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
-#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */
-#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
-#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
-#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */
-#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
-#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */
-#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */
-#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */
-#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */
-#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
-#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
-#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
+#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */
+#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */
+#define E1000_TXD_POPTS_SHIFT 8 /* POPTS shift */
+#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
+#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */
+#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
+#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */
+#define E1000_TXD_CMD_DEXT 0x20000000 /* Desc extension (0 = legacy) */
+#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
+#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */
+#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */
+#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */
+#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */
+#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */
+#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
+#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
+#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
+/* Extended desc bits for Linksec and timesync */
+#define E1000_TXD_CMD_LINKSEC 0x10000000 /* Apply LinkSec on packet */
+#define E1000_TXD_EXTCMD_TSTAMP 0x00000010 /* IEEE1588 Timestamp packet */
/* Transmit Control */
-#define E1000_TCTL_EN 0x00000002 /* enable Tx */
-#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
-#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
-#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
-#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
-#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */
+#define E1000_TCTL_RST 0x00000001 /* software reset */
+#define E1000_TCTL_EN 0x00000002 /* enable Tx */
+#define E1000_TCTL_BCE 0x00000004 /* busy check enable */
+#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
+#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
+#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
+#define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */
+#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */
+#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
+#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */
+#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */
/* Transmit Arbitration Count */
+#define E1000_TARC0_ENABLE 0x00000400 /* Enable Tx Queue 0 */
/* SerDes Control */
-#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400
+#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400
/* Receive Checksum Control */
-#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
-#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
-#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
+#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */
+#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */
+#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
+#define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */
+#define E1000_RXCSUM_CRCOFL 0x00000800 /* CRC32 offload enable */
+#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
+#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
/* Header split receive */
-#define E1000_RFCTL_NFSW_DIS 0x00000040
-#define E1000_RFCTL_NFSR_DIS 0x00000080
-#define E1000_RFCTL_ACK_DIS 0x00001000
-#define E1000_RFCTL_EXTEN 0x00008000
-#define E1000_RFCTL_IPV6_EX_DIS 0x00010000
-#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
+#define E1000_RFCTL_ISCSI_DIS 0x00000001
+#define E1000_RFCTL_ISCSI_DWC_MASK 0x0000003E
+#define E1000_RFCTL_ISCSI_DWC_SHIFT 1
+#define E1000_RFCTL_NFSW_DIS 0x00000040
+#define E1000_RFCTL_NFSR_DIS 0x00000080
+#define E1000_RFCTL_NFS_VER_MASK 0x00000300
+#define E1000_RFCTL_NFS_VER_SHIFT 8
+#define E1000_RFCTL_IPV6_DIS 0x00000400
+#define E1000_RFCTL_IPV6_XSUM_DIS 0x00000800
+#define E1000_RFCTL_ACK_DIS 0x00001000
+#define E1000_RFCTL_ACKD_DIS 0x00002000
+#define E1000_RFCTL_IPFRSP_DIS 0x00004000
+#define E1000_RFCTL_EXTEN 0x00008000
+#define E1000_RFCTL_IPV6_EX_DIS 0x00010000
+#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
+#define E1000_RFCTL_LEF 0x00040000
/* Collision related configuration parameters */
-#define E1000_COLLISION_THRESHOLD 15
-#define E1000_CT_SHIFT 4
-#define E1000_COLLISION_DISTANCE 63
-#define E1000_COLD_SHIFT 12
+#define E1000_COLLISION_THRESHOLD 15
+#define E1000_CT_SHIFT 4
+#define E1000_COLLISION_DISTANCE 63
+#define E1000_COLD_SHIFT 12
/* Default values for the transmit IPG register */
-#define DEFAULT_82543_TIPG_IPGT_COPPER 8
+#define DEFAULT_82543_TIPG_IPGT_FIBER 9
+#define DEFAULT_82543_TIPG_IPGT_COPPER 8
-#define E1000_TIPG_IPGT_MASK 0x000003FF
+#define E1000_TIPG_IPGT_MASK 0x000003FF
+#define E1000_TIPG_IPGR1_MASK 0x000FFC00
+#define E1000_TIPG_IPGR2_MASK 0x3FF00000
-#define DEFAULT_82543_TIPG_IPGR1 8
-#define E1000_TIPG_IPGR1_SHIFT 10
+#define DEFAULT_82543_TIPG_IPGR1 8
+#define E1000_TIPG_IPGR1_SHIFT 10
-#define DEFAULT_82543_TIPG_IPGR2 6
-#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7
-#define E1000_TIPG_IPGR2_SHIFT 20
+#define DEFAULT_82543_TIPG_IPGR2 6
+#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7
+#define E1000_TIPG_IPGR2_SHIFT 20
-#define MAX_JUMBO_FRAME_SIZE 0x3F00
+/* Ethertype field values */
+#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
+
+#define ETHERNET_FCS_SIZE 4
+#define MAX_JUMBO_FRAME_SIZE 0x3F00
/* Extended Configuration Control and Size */
-#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
-#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001
-#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE 0x00000008
-#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020
-#define E1000_EXTCNF_CTRL_GATE_PHY_CFG 0x00000080
-#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK 0x00FF0000
-#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT 16
-#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK 0x0FFF0000
-#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT 16
-
-#define E1000_PHY_CTRL_D0A_LPLU 0x00000002
-#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004
-#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008
-#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040
-
-#define E1000_KABGTXD_BGSQLBIAS 0x00050000
+#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
+#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001
+#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE 0x00000008
+#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020
+#define E1000_EXTCNF_CTRL_GATE_PHY_CFG 0x00000080
+#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK 0x00FF0000
+#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT 16
+#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK 0x0FFF0000
+#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT 16
+
+#define E1000_PHY_CTRL_SPD_EN 0x00000001
+#define E1000_PHY_CTRL_D0A_LPLU 0x00000002
+#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004
+#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008
+#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040
+
+#define E1000_KABGTXD_BGSQLBIAS 0x00050000
/* PBA constants */
-#define E1000_PBA_8K 0x0008 /* 8KB */
-#define E1000_PBA_16K 0x0010 /* 16KB */
-
-#define E1000_PBS_16K E1000_PBA_16K
-
-#define IFS_MAX 80
-#define IFS_MIN 40
-#define IFS_RATIO 4
-#define IFS_STEP 10
-#define MIN_NUM_XMITS 1000
+#define E1000_PBA_6K 0x0006 /* 6KB */
+#define E1000_PBA_8K 0x0008 /* 8KB */
+#define E1000_PBA_10K 0x000A /* 10KB */
+#define E1000_PBA_12K 0x000C /* 12KB */
+#define E1000_PBA_14K 0x000E /* 14KB */
+#define E1000_PBA_16K 0x0010 /* 16KB */
+#define E1000_PBA_18K 0x0012
+#define E1000_PBA_20K 0x0014
+#define E1000_PBA_22K 0x0016
+#define E1000_PBA_24K 0x0018
+#define E1000_PBA_26K 0x001A
+#define E1000_PBA_30K 0x001E
+#define E1000_PBA_32K 0x0020
+#define E1000_PBA_34K 0x0022
+#define E1000_PBA_35K 0x0023
+#define E1000_PBA_38K 0x0026
+#define E1000_PBA_40K 0x0028
+#define E1000_PBA_48K 0x0030 /* 48KB */
+#define E1000_PBA_64K 0x0040 /* 64KB */
+
+#define E1000_PBA_RXA_MASK 0xFFFF;
+
+#define E1000_PBS_16K E1000_PBA_16K
+#define E1000_PBS_24K E1000_PBA_24K
+
+#define IFS_MAX 80
+#define IFS_MIN 40
+#define IFS_RATIO 4
+#define IFS_STEP 10
+#define MIN_NUM_XMITS 1000
/* SW Semaphore Register */
-#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
-#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
-#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */
+#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
+#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
+#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */
+#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */
-#define E1000_SWSM2_LOCK 0x00000002 /* Secondary driver semaphore bit */
+#define E1000_SWSM2_LOCK 0x00000002 /* Secondary driver semaphore bit */
/* Interrupt Cause Read */
-#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
-#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
-#define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */
-#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */
-#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */
-#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
-#define E1000_ICR_RXQ0 0x00100000 /* Rx Queue 0 Interrupt */
-#define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */
-#define E1000_ICR_TXQ0 0x00400000 /* Tx Queue 0 Interrupt */
-#define E1000_ICR_TXQ1 0x00800000 /* Tx Queue 1 Interrupt */
-#define E1000_ICR_OTHER 0x01000000 /* Other Interrupts */
+#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
+#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */
+#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
+#define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */
+#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */
+#define E1000_ICR_RXO 0x00000040 /* Rx overrun */
+#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */
+#define E1000_ICR_VMMB 0x00000100 /* VM MB event */
+#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */
+#define E1000_ICR_RXCFG 0x00000400 /* Rx /c/ ordered set */
+#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */
+#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */
+#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */
+#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */
+#define E1000_ICR_TXD_LOW 0x00008000
+#define E1000_ICR_SRPD 0x00010000
+#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */
+#define E1000_ICR_MNG 0x00040000 /* Manageability event */
+#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */
+/* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_INT_ASSERTED 0x80000000
+#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* Q0 Rx desc FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* Q0 Tx desc FIFO parity error */
+#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity err */
+#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */
+#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* Q1 Rx desc FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* Q1 Tx desc FIFO parity error */
+#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */
+/* FW changed the status of DISSW bit in the FWSM */
+#define E1000_ICR_DSW 0x00000020
+/* LAN connected device generates an interrupt */
+#define E1000_ICR_PHYINT 0x00001000
+#define E1000_ICR_DOUTSYNC 0x10000000 /* NIC DMA out of sync */
+#define E1000_ICR_EPRST 0x00100000 /* ME hardware reset occurs */
+#define E1000_ICR_RXQ0 0x00100000 /* Rx Queue 0 Interrupt */
+#define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */
+#define E1000_ICR_TXQ0 0x00400000 /* Tx Queue 0 Interrupt */
+#define E1000_ICR_TXQ1 0x00800000 /* Tx Queue 1 Interrupt */
+#define E1000_ICR_OTHER 0x01000000 /* Other Interrupts */
+
+#define E1000_ITR_MASK 0x000FFFFF /* ITR value bitfield */
+#define E1000_ITR_MULT 256 /* ITR mulitplier in nsec */
/* PBA ECC Register */
-#define E1000_PBA_ECC_COUNTER_MASK 0xFFF00000 /* ECC counter mask */
-#define E1000_PBA_ECC_COUNTER_SHIFT 20 /* ECC counter shift value */
-#define E1000_PBA_ECC_CORR_EN 0x00000001 /* ECC correction enable */
-#define E1000_PBA_ECC_STAT_CLR 0x00000002 /* Clear ECC error counter */
-#define E1000_PBA_ECC_INT_EN 0x00000004 /* Enable ICR bit 5 for ECC */
+#define E1000_PBA_ECC_COUNTER_MASK 0xFFF00000 /* ECC counter mask */
+#define E1000_PBA_ECC_COUNTER_SHIFT 20 /* ECC counter shift value */
+#define E1000_PBA_ECC_CORR_EN 0x00000001 /* Enable ECC error correction */
+#define E1000_PBA_ECC_STAT_CLR 0x00000002 /* Clear ECC error counter */
+#define E1000_PBA_ECC_INT_EN 0x00000004 /* Enable ICR bit 5 on ECC error */
+
+/*
+ * This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register. Each bit is documented below:
+ * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ * o RXSEQ = Receive Sequence Error
+ */
+#define POLL_IMS_ENABLE_MASK ( \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ)
/*
* This defines the bits that are set in the Interrupt Mask
* o LSC = Link Status Change
*/
#define IMS_ENABLE_MASK ( \
- E1000_IMS_RXT0 | \
- E1000_IMS_TXDW | \
- E1000_IMS_RXDMT0 | \
- E1000_IMS_RXSEQ | \
- E1000_IMS_LSC)
+ E1000_IMS_RXT0 | \
+ E1000_IMS_TXDW | \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ | \
+ E1000_IMS_LSC)
/* Interrupt Mask Set */
-#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
-#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
-#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */
-#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
-#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */
-#define E1000_IMS_RXQ0 E1000_ICR_RXQ0 /* Rx Queue 0 Interrupt */
-#define E1000_IMS_RXQ1 E1000_ICR_RXQ1 /* Rx Queue 1 Interrupt */
-#define E1000_IMS_TXQ0 E1000_ICR_TXQ0 /* Tx Queue 0 Interrupt */
-#define E1000_IMS_TXQ1 E1000_ICR_TXQ1 /* Tx Queue 1 Interrupt */
-#define E1000_IMS_OTHER E1000_ICR_OTHER /* Other Interrupts */
+#define E1000_IMS_TXDW E1000_ICR_TXDW /* Tx desc written back */
+#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMS_VMMB E1000_ICR_VMMB /* Mail box activity */
+#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */
+#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
+#define E1000_IMS_RXO E1000_ICR_RXO /* Rx overrun */
+#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */
+#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_IMS_RXCFG E1000_ICR_RXCFG /* Rx /c/ ordered set */
+#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_IMS_SRPD E1000_ICR_SRPD
+#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */
+/* Q0 Rx desc FIFO parity error */
+#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0
+/* Q0 Tx desc FIFO parity error */
+#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0
+/* host arb read buffer parity error */
+#define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR
+/* packet buffer parity error */
+#define E1000_IMS_PB_PAR E1000_ICR_PB_PAR
+/* Q1 Rx desc FIFO parity error */
+#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1
+/* Q1 Tx desc FIFO parity error */
+#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1
+#define E1000_IMS_DSW E1000_ICR_DSW
+#define E1000_IMS_PHYINT E1000_ICR_PHYINT
+#define E1000_IMS_DOUTSYNC E1000_ICR_DOUTSYNC /* NIC DMA out of sync */
+#define E1000_IMS_EPRST E1000_ICR_EPRST
+#define E1000_IMS_RXQ0 E1000_ICR_RXQ0 /* Rx Queue 0 Interrupt */
+#define E1000_IMS_RXQ1 E1000_ICR_RXQ1 /* Rx Queue 1 Interrupt */
+#define E1000_IMS_TXQ0 E1000_ICR_TXQ0 /* Tx Queue 0 Interrupt */
+#define E1000_IMS_TXQ1 E1000_ICR_TXQ1 /* Tx Queue 1 Interrupt */
+#define E1000_IMS_OTHER E1000_ICR_OTHER /* Other Interrupts */
/* Interrupt Cause Set */
-#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
-#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */
-#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
+#define E1000_ICS_TXDW E1000_ICR_TXDW /* Tx desc written back */
+#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */
+#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
+#define E1000_ICS_RXO E1000_ICR_RXO /* Rx overrun */
+#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */
+#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_ICS_RXCFG E1000_ICR_RXCFG /* Rx /c/ ordered set */
+#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_ICS_SRPD E1000_ICR_SRPD
+#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */
+/* Q0 Rx desc FIFO parity error */
+#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0
+/* Q0 Tx desc FIFO parity error */
+#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0
+/* host arb read buffer parity error */
+#define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR
+/* packet buffer parity error */
+#define E1000_ICS_PB_PAR E1000_ICR_PB_PAR
+/* Q1 Rx desc FIFO parity error */
+#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1
+/* Q1 Tx desc FIFO parity error */
+#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1
+#define E1000_ICS_DSW E1000_ICR_DSW
+#define E1000_ICS_DOUTSYNC E1000_ICR_DOUTSYNC /* NIC DMA out of sync */
+#define E1000_ICS_PHYINT E1000_ICR_PHYINT
+#define E1000_ICS_EPRST E1000_ICR_EPRST
/* Transmit Descriptor Control */
-#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
-#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */
-#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */
-#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */
-#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
-#define E1000_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */
-/* Enable the counting of desc. still to be processed. */
-#define E1000_TXDCTL_COUNT_DESC 0x00400000
+#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
+#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */
+#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */
+#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */
+#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */
+#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
+#define E1000_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */
+/* Enable the counting of descriptors still to be processed. */
+#define E1000_TXDCTL_COUNT_DESC 0x00400000
/* Flow Control Constants */
-#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
-#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
-#define FLOW_CONTROL_TYPE 0x8808
+#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
+#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
+#define FLOW_CONTROL_TYPE 0x8808
/* 802.1q VLAN Packet Size */
-#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
+#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */
+#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
/* Receive Address */
/*
* (RAR[15]) for our directed address used by controllers with
* manageability enabled, allowing us room for 15 multicast addresses.
*/
-#define E1000_RAR_ENTRIES 15
-#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
-#define E1000_RAL_MAC_ADDR_LEN 4
-#define E1000_RAH_MAC_ADDR_LEN 2
+#define E1000_RAR_ENTRIES 15
+#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
+#define E1000_RAL_MAC_ADDR_LEN 4
+#define E1000_RAH_MAC_ADDR_LEN 2
+#define E1000_RAH_POOL_MASK 0x03FC0000
+#define E1000_RAH_POOL_SHIFT 18
+#define E1000_RAH_POOL_1 0x00040000
/* Error Codes */
-#define E1000_ERR_NVM 1
-#define E1000_ERR_PHY 2
-#define E1000_ERR_CONFIG 3
-#define E1000_ERR_PARAM 4
-#define E1000_ERR_MAC_INIT 5
-#define E1000_ERR_PHY_TYPE 6
-#define E1000_ERR_RESET 9
-#define E1000_ERR_MASTER_REQUESTS_PENDING 10
-#define E1000_ERR_HOST_INTERFACE_COMMAND 11
-#define E1000_BLK_PHY_RESET 12
-#define E1000_ERR_SWFW_SYNC 13
-#define E1000_NOT_IMPLEMENTED 14
-#define E1000_ERR_INVALID_ARGUMENT 16
-#define E1000_ERR_NO_SPACE 17
-#define E1000_ERR_NVM_PBA_SECTION 18
+#define E1000_ERR_NVM 1
+#define E1000_ERR_PHY 2
+#define E1000_ERR_CONFIG 3
+#define E1000_ERR_PARAM 4
+#define E1000_ERR_MAC_INIT 5
+#define E1000_ERR_PHY_TYPE 6
+#define E1000_ERR_RESET 9
+#define E1000_ERR_MASTER_REQUESTS_PENDING 10
+#define E1000_ERR_HOST_INTERFACE_COMMAND 11
+#define E1000_BLK_PHY_RESET 12
+#define E1000_ERR_SWFW_SYNC 13
+#define E1000_NOT_IMPLEMENTED 14
+#define E1000_ERR_MBX 15
+#define E1000_ERR_INVALID_ARGUMENT 16
+#define E1000_ERR_NO_SPACE 17
+#define E1000_ERR_NVM_PBA_SECTION 18
+#define E1000_ERR_INVM_VALUE_NOT_FOUND 20
/* Loop limit on how long we wait for auto-negotiation to complete */
-#define FIBER_LINK_UP_LIMIT 50
-#define COPPER_LINK_UP_LIMIT 10
-#define PHY_AUTO_NEG_LIMIT 45
-#define PHY_FORCE_LIMIT 20
+#define FIBER_LINK_UP_LIMIT 50
+#define COPPER_LINK_UP_LIMIT 10
+#define PHY_AUTO_NEG_LIMIT 45
+#define PHY_FORCE_LIMIT 20
/* Number of 100 microseconds we wait for PCI Express master disable */
-#define MASTER_DISABLE_TIMEOUT 800
+#define MASTER_DISABLE_TIMEOUT 800
/* Number of milliseconds we wait for PHY configuration done after MAC reset */
-#define PHY_CFG_TIMEOUT 100
+#define PHY_CFG_TIMEOUT 100
/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */
-#define MDIO_OWNERSHIP_TIMEOUT 10
+#define MDIO_OWNERSHIP_TIMEOUT 10
/* Number of milliseconds for NVM auto read done after MAC reset. */
-#define AUTO_READ_DONE_TIMEOUT 10
+#define AUTO_READ_DONE_TIMEOUT 10
/* Flow Control */
-#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */
-#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */
-#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
+#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */
+#define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */
+#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */
+#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
/* Transmit Configuration Word */
-#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */
-#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */
-#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */
-#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */
-#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */
+#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */
+#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */
+#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */
+#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */
+#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */
+#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */
+#define E1000_TXCW_NP 0x00008000 /* TXCW next page */
+#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */
+#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */
+#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */
/* Receive Configuration Word */
-#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */
-#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */
-#define E1000_RXCW_C 0x20000000 /* Receive config */
-#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
+#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */
+#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */
+#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */
+#define E1000_RXCW_CC 0x10000000 /* Receive config change */
+#define E1000_RXCW_C 0x20000000 /* Receive config */
+#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
+#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */
+
+#define E1000_TSYNCTXCTL_VALID 0x00000001 /* Tx timestamp valid */
+#define E1000_TSYNCTXCTL_ENABLED 0x00000010 /* enable Tx timestamping */
+
+#define E1000_TSYNCRXCTL_VALID 0x00000001 /* Rx timestamp valid */
+#define E1000_TSYNCRXCTL_TYPE_MASK 0x0000000E /* Rx type mask */
+#define E1000_TSYNCRXCTL_TYPE_L2_V2 0x00
+#define E1000_TSYNCRXCTL_TYPE_L4_V1 0x02
+#define E1000_TSYNCRXCTL_TYPE_L2_L4_V2 0x04
+#define E1000_TSYNCRXCTL_TYPE_ALL 0x08
+#define E1000_TSYNCRXCTL_TYPE_EVENT_V2 0x0A
+#define E1000_TSYNCRXCTL_ENABLED 0x00000010 /* enable Rx timestamping */
+
+#define E1000_TSYNCRXCFG_PTP_V1_CTRLT_MASK 0x000000FF
+#define E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE 0x00
+#define E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE 0x01
+#define E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE 0x02
+#define E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE 0x03
+#define E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE 0x04
+
+#define E1000_TSYNCRXCFG_PTP_V2_MSGID_MASK 0x00000F00
+#define E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE 0x0000
+#define E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE 0x0100
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE 0x0200
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE 0x0300
+#define E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE 0x0800
+#define E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE 0x0900
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE 0x0A00
+#define E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE 0x0B00
+#define E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE 0x0C00
+#define E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE 0x0D00
+
+#define E1000_TIMINCA_16NS_SHIFT 24
/* PCI Express Control */
-#define E1000_GCR_RXD_NO_SNOOP 0x00000001
-#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
-#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004
-#define E1000_GCR_TXD_NO_SNOOP 0x00000008
-#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010
-#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
-
-#define PCIE_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
- E1000_GCR_RXDSCW_NO_SNOOP | \
- E1000_GCR_RXDSCR_NO_SNOOP | \
- E1000_GCR_TXD_NO_SNOOP | \
- E1000_GCR_TXDSCW_NO_SNOOP | \
- E1000_GCR_TXDSCR_NO_SNOOP)
+#define E1000_GCR_RXD_NO_SNOOP 0x00000001
+#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
+#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004
+#define E1000_GCR_TXD_NO_SNOOP 0x00000008
+#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010
+#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
+#define E1000_GCR_CMPL_TMOUT_MASK 0x0000F000
+#define E1000_GCR_CMPL_TMOUT_10ms 0x00001000
+#define E1000_GCR_CMPL_TMOUT_RESEND 0x00010000
+#define E1000_GCR_CAP_VER2 0x00040000
+
+#define PCIE_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
+ E1000_GCR_RXDSCW_NO_SNOOP | \
+ E1000_GCR_RXDSCR_NO_SNOOP | \
+ E1000_GCR_TXD_NO_SNOOP | \
+ E1000_GCR_TXDSCW_NO_SNOOP | \
+ E1000_GCR_TXDSCR_NO_SNOOP)
/* PHY Control Register */
-#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
-#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
-#define MII_CR_POWER_DOWN 0x0800 /* Power down */
-#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
-#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
-#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
-#define MII_CR_SPEED_1000 0x0040
-#define MII_CR_SPEED_100 0x2000
-#define MII_CR_SPEED_10 0x0000
+#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
+#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
+#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN 0x0800 /* Power down */
+#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
+#define MII_CR_SPEED_1000 0x0040
+#define MII_CR_SPEED_100 0x2000
+#define MII_CR_SPEED_10 0x0000
/* PHY Status Register */
-#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
-#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
+#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
+#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
+#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
+#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
/* Autoneg Advertisement Register */
-#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
-#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
-#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
-#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
-#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
-#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
+#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */
+#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
+#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
+#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
+#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
+#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
+#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */
/* Link Partner Ability Register (Base Page) */
-#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
-#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
+#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
+#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP 10T Half Dplx Capable */
+#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP 10T Full Dplx Capable */
+#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP 100TX Half Dplx Capable */
+#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP 100TX Full Dplx Capable */
+#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */
+#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asym Pause Direction bit */
+#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP detected Remote Fault */
+#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP rx'd link code word */
+#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */
/* Autoneg Expansion Register */
-#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */
+#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */
+#define NWAY_ER_PAGE_RXD 0x0002 /* LP 10T Half Dplx Capable */
+#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP 10T Full Dplx Capable */
+#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP 100TX Half Dplx Capable */
+#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP 100TX Full Dplx Capable */
/* 1000BASE-T Control Register */
-#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
-#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
- /* 0=DTE device */
-#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
- /* 0=Configure PHY as Slave */
-#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
- /* 0=Automatic Master/Slave config */
+#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */
+#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
+/* 1=Repeater/switch device port 0=DTE device */
+#define CR_1000T_REPEATER_DTE 0x0400
+/* 1=Configure PHY as Master 0=Configure PHY as Slave */
+#define CR_1000T_MS_VALUE 0x0800
+/* 1=Master/Slave manual config value 0=Automatic Master/Slave config */
+#define CR_1000T_MS_ENABLE 0x1000
+#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
+#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
+#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */
+#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */
+#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */
/* 1000BASE-T Status Register */
-#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
-#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
+#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle err since last rd */
+#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asym pause direction bit */
+#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
+#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
+#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
+#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local Tx Master, 0=Slave */
+#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */
+#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5
/* PHY 1000 MII Register/Bit Definitions */
/* PHY Registers defined by IEEE */
-#define PHY_CONTROL 0x00 /* Control Register */
-#define PHY_STATUS 0x01 /* Status Register */
-#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
-#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
-#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
-#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
-#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
-#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
-#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
-#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
-
-#define PHY_CONTROL_LB 0x4000 /* PHY Loopback bit */
+#define PHY_CONTROL 0x00 /* Control Register */
+#define PHY_STATUS 0x01 /* Status Register */
+#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
+#define PHY_NEXT_PAGE_TX 0x07 /* Next Page Tx */
+#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
+#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
+
+#define PHY_CONTROL_LB 0x4000 /* PHY Loopback bit */
/* NVM Control */
-#define E1000_EECD_SK 0x00000001 /* NVM Clock */
-#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */
-#define E1000_EECD_DI 0x00000004 /* NVM Data In */
-#define E1000_EECD_DO 0x00000008 /* NVM Data Out */
-#define E1000_EECD_REQ 0x00000040 /* NVM Access Request */
-#define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */
-#define E1000_EECD_PRES 0x00000100 /* NVM Present */
-#define E1000_EECD_SIZE 0x00000200 /* NVM Size (0=64 word 1=256 word) */
-/* NVM Addressing bits based on type (0-small, 1-large) */
-#define E1000_EECD_ADDR_BITS 0x00000400
-#define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */
-#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */
-#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */
-#define E1000_EECD_SIZE_EX_SHIFT 11
-#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */
-#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */
-#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
-#define E1000_EECD_SEC1VAL_VALID_MASK (E1000_EECD_AUTO_RD | E1000_EECD_PRES)
-
-#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM read/write registers */
-#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
-#define E1000_NVM_RW_REG_START 1 /* Start operation */
-#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
-#define E1000_NVM_POLL_WRITE 1 /* Flag for polling for write complete */
-#define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */
-#define E1000_FLASH_UPDATES 2000
+#define E1000_EECD_SK 0x00000001 /* NVM Clock */
+#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */
+#define E1000_EECD_DI 0x00000004 /* NVM Data In */
+#define E1000_EECD_DO 0x00000008 /* NVM Data Out */
+#define E1000_EECD_FWE_MASK 0x00000030
+#define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */
+#define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */
+#define E1000_EECD_FWE_SHIFT 4
+#define E1000_EECD_REQ 0x00000040 /* NVM Access Request */
+#define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */
+#define E1000_EECD_PRES 0x00000100 /* NVM Present */
+#define E1000_EECD_SIZE 0x00000200 /* NVM Size (0=64 word 1=256 word) */
+#define E1000_EECD_BLOCKED 0x00008000 /* Bit banging access blocked flag */
+#define E1000_EECD_ABORT 0x00010000 /* NVM operation aborted flag */
+#define E1000_EECD_TIMEOUT 0x00020000 /* NVM read operation timeout flag */
+#define E1000_EECD_ERROR_CLR 0x00040000 /* NVM error status clear bit */
+/* NVM Addressing bits based on type 0=small, 1=large */
+#define E1000_EECD_ADDR_BITS 0x00000400
+#define E1000_EECD_TYPE 0x00002000 /* NVM Type (1-SPI, 0-Microwire) */
+#define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */
+#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */
+#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */
+#define E1000_EECD_SIZE_EX_SHIFT 11
+#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */
+#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */
+#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */
+#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */
+#define E1000_EECD_AUPDEN 0x00100000 /* Ena Auto FLASH update */
+#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */
+#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
+#define E1000_EECD_SECVAL_SHIFT 22
+#define E1000_EECD_SEC1VAL_VALID_MASK (E1000_EECD_AUTO_RD | E1000_EECD_PRES)
+
+#define E1000_NVM_SWDPIN0 0x0001 /* SWDPIN 0 NVM Value */
+#define E1000_NVM_LED_LOGIC 0x0020 /* Led Logic Word */
+#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM read/write regs */
+#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
+#define E1000_NVM_RW_REG_START 1 /* Start operation */
+#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
+#define E1000_NVM_POLL_WRITE 1 /* Flag for polling for write complete */
+#define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */
+#define E1000_FLASH_UPDATES 2000
/* NVM Word Offsets */
-#define NVM_COMPAT 0x0003
-#define NVM_ID_LED_SETTINGS 0x0004
-#define NVM_INIT_CONTROL2_REG 0x000F
-#define NVM_INIT_CONTROL3_PORT_B 0x0014
-#define NVM_INIT_3GIO_3 0x001A
-#define NVM_INIT_CONTROL3_PORT_A 0x0024
-#define NVM_CFG 0x0012
-#define NVM_ALT_MAC_ADDR_PTR 0x0037
-#define NVM_CHECKSUM_REG 0x003F
-
-#define E1000_NVM_INIT_CTRL2_MNGM 0x6000 /* Manageability Operation Mode mask */
-
-#define E1000_NVM_CFG_DONE_PORT_0 0x40000 /* MNG config cycle done */
-#define E1000_NVM_CFG_DONE_PORT_1 0x80000 /* ...for second port */
+#define NVM_COMPAT 0x0003
+#define NVM_ID_LED_SETTINGS 0x0004
+#define NVM_VERSION 0x0005
+#define NVM_SERDES_AMPLITUDE 0x0006 /* SERDES output amplitude */
+#define NVM_PHY_CLASS_WORD 0x0007
+
+#define NVM_INIT_CONTROL1_REG 0x000A
+#define NVM_INIT_CONTROL2_REG 0x000F
+#define NVM_SWDEF_PINS_CTRL_PORT_1 0x0010
+#define NVM_INIT_CONTROL3_PORT_B 0x0014
+#define NVM_INIT_3GIO_3 0x001A
+#define NVM_SWDEF_PINS_CTRL_PORT_0 0x0020
+#define NVM_INIT_CONTROL3_PORT_A 0x0024
+#define NVM_CFG 0x0012
+#define NVM_FLASH_VERSION 0x0032
+#define NVM_ALT_MAC_ADDR_PTR 0x0037
+#define NVM_CHECKSUM_REG 0x003F
+
+#define E1000_NVM_CFG_DONE_PORT_0 0x040000 /* MNG config cycle done */
+#define E1000_NVM_CFG_DONE_PORT_1 0x080000 /* ...for second port */
/* Mask bits for fields in Word 0x0f of the NVM */
-#define NVM_WORD0F_PAUSE_MASK 0x3000
-#define NVM_WORD0F_PAUSE 0x1000
-#define NVM_WORD0F_ASM_DIR 0x2000
+#define NVM_WORD0F_PAUSE_MASK 0x3000
+#define NVM_WORD0F_PAUSE 0x1000
+#define NVM_WORD0F_ASM_DIR 0x2000
+#define NVM_WORD0F_ANE 0x0800
+#define NVM_WORD0F_SWPDIO_EXT_MASK 0x00F0
+#define NVM_WORD0F_LPLU 0x0001
/* Mask bits for fields in Word 0x1a of the NVM */
-#define NVM_WORD1A_ASPM_MASK 0x000C
+#define NVM_WORD1A_ASPM_MASK 0x000C
/* Mask bits for fields in Word 0x03 of the EEPROM */
-#define NVM_COMPAT_LOM 0x0800
+#define NVM_COMPAT_LOM 0x0800
/* length of string needed to store PBA number */
-#define E1000_PBANUM_LENGTH 11
+#define E1000_PBANUM_LENGTH 11
/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */
-#define NVM_SUM 0xBABA
-
-/* PBA (printed board assembly) number words */
-#define NVM_PBA_OFFSET_0 8
-#define NVM_PBA_OFFSET_1 9
-#define NVM_PBA_PTR_GUARD 0xFAFA
-#define NVM_WORD_SIZE_BASE_SHIFT 6
+#define NVM_SUM 0xBABA
+
+#define NVM_MAC_ADDR_OFFSET 0
+#define NVM_PBA_OFFSET_0 8
+#define NVM_PBA_OFFSET_1 9
+#define NVM_PBA_PTR_GUARD 0xFAFA
+#define NVM_RESERVED_WORD 0xFFFF
+#define NVM_PHY_CLASS_A 0x8000
+#define NVM_SERDES_AMPLITUDE_MASK 0x000F
+#define NVM_SIZE_MASK 0x1C00
+#define NVM_SIZE_SHIFT 10
+#define NVM_WORD_SIZE_BASE_SHIFT 6
+#define NVM_SWDPIO_EXT_SHIFT 4
/* NVM Commands - SPI */
-#define NVM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
-#define NVM_READ_OPCODE_SPI 0x03 /* NVM read opcode */
-#define NVM_WRITE_OPCODE_SPI 0x02 /* NVM write opcode */
-#define NVM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
-#define NVM_WREN_OPCODE_SPI 0x06 /* NVM set Write Enable latch */
-#define NVM_RDSR_OPCODE_SPI 0x05 /* NVM read Status register */
+#define NVM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
+#define NVM_READ_OPCODE_SPI 0x03 /* NVM read opcode */
+#define NVM_WRITE_OPCODE_SPI 0x02 /* NVM write opcode */
+#define NVM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
+#define NVM_WREN_OPCODE_SPI 0x06 /* NVM set Write Enable latch */
+#define NVM_WRDI_OPCODE_SPI 0x04 /* NVM reset Write Enable latch */
+#define NVM_RDSR_OPCODE_SPI 0x05 /* NVM read Status register */
+#define NVM_WRSR_OPCODE_SPI 0x01 /* NVM write Status register */
/* SPI NVM Status Register */
-#define NVM_STATUS_RDY_SPI 0x01
+#define NVM_STATUS_RDY_SPI 0x01
+#define NVM_STATUS_WEN_SPI 0x02
+#define NVM_STATUS_BP0_SPI 0x04
+#define NVM_STATUS_BP1_SPI 0x08
+#define NVM_STATUS_WPEN_SPI 0x80
/* Word definitions for ID LED Settings */
-#define ID_LED_RESERVED_0000 0x0000
-#define ID_LED_RESERVED_FFFF 0xFFFF
-#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
- (ID_LED_OFF1_OFF2 << 8) | \
- (ID_LED_DEF1_DEF2 << 4) | \
- (ID_LED_DEF1_DEF2))
-#define ID_LED_DEF1_DEF2 0x1
-#define ID_LED_DEF1_ON2 0x2
-#define ID_LED_DEF1_OFF2 0x3
-#define ID_LED_ON1_DEF2 0x4
-#define ID_LED_ON1_ON2 0x5
-#define ID_LED_ON1_OFF2 0x6
-#define ID_LED_OFF1_DEF2 0x7
-#define ID_LED_OFF1_ON2 0x8
-#define ID_LED_OFF1_OFF2 0x9
-
-#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF
-#define IGP_ACTIVITY_LED_ENABLE 0x0300
-#define IGP_LED3_MODE 0x07000000
+#define ID_LED_RESERVED_0000 0x0000
+#define ID_LED_RESERVED_FFFF 0xFFFF
+#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
+ (ID_LED_OFF1_OFF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+#define ID_LED_DEF1_DEF2 0x1
+#define ID_LED_DEF1_ON2 0x2
+#define ID_LED_DEF1_OFF2 0x3
+#define ID_LED_ON1_DEF2 0x4
+#define ID_LED_ON1_ON2 0x5
+#define ID_LED_ON1_OFF2 0x6
+#define ID_LED_OFF1_DEF2 0x7
+#define ID_LED_OFF1_ON2 0x8
+#define ID_LED_OFF1_OFF2 0x9
+
+#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF
+#define IGP_ACTIVITY_LED_ENABLE 0x0300
+#define IGP_LED3_MODE 0x07000000
/* PCI/PCI-X/PCI-EX Config space */
-#define PCI_HEADER_TYPE_REGISTER 0x0E
-#define PCIE_LINK_STATUS 0x12
-
-#define PCI_HEADER_TYPE_MULTIFUNC 0x80
-#define PCIE_LINK_WIDTH_MASK 0x3F0
-#define PCIE_LINK_WIDTH_SHIFT 4
-
-#define PHY_REVISION_MASK 0xFFFFFFF0
-#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
-#define MAX_PHY_MULTI_PAGE_REG 0xF
+#define PCI_HEADER_TYPE_REGISTER 0x0E
+#define PCIE_LINK_STATUS 0x12
+#define PCIE_DEVICE_CONTROL2 0x28
+
+#define PCI_HEADER_TYPE_MULTIFUNC 0x80
+#define PCIE_LINK_WIDTH_MASK 0x3F0
+#define PCIE_LINK_WIDTH_SHIFT 4
+#define PCIE_LINK_SPEED_MASK 0x0F
+#define PCIE_LINK_SPEED_2500 0x01
+#define PCIE_LINK_SPEED_5000 0x02
+#define PCIE_DEVICE_CONTROL2_16ms 0x0005
+
+#define PHY_REVISION_MASK 0xFFFFFFF0
+#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
+#define MAX_PHY_MULTI_PAGE_REG 0xF
/* Bit definitions for valid PHY IDs. */
/*
* I = Integrated
* E = External
*/
-#define M88E1000_E_PHY_ID 0x01410C50
-#define M88E1000_I_PHY_ID 0x01410C30
-#define M88E1011_I_PHY_ID 0x01410C20
-#define IGP01E1000_I_PHY_ID 0x02A80380
-#define M88E1111_I_PHY_ID 0x01410CC0
-#define GG82563_E_PHY_ID 0x01410CA0
-#define IGP03E1000_E_PHY_ID 0x02A80390
-#define IFE_E_PHY_ID 0x02A80330
-#define IFE_PLUS_E_PHY_ID 0x02A80320
-#define IFE_C_E_PHY_ID 0x02A80310
-#define BME1000_E_PHY_ID 0x01410CB0
-#define BME1000_E_PHY_ID_R2 0x01410CB1
-#define I82577_E_PHY_ID 0x01540050
-#define I82578_E_PHY_ID 0x004DD040
-#define I82579_E_PHY_ID 0x01540090
+#define M88E1000_E_PHY_ID 0x01410C50
+#define M88E1000_I_PHY_ID 0x01410C30
+#define M88E1011_I_PHY_ID 0x01410C20
+#define IGP01E1000_I_PHY_ID 0x02A80380
+#define M88E1011_I_REV_4 0x04
+#define M88E1111_I_PHY_ID 0x01410CC0
+#define GG82563_E_PHY_ID 0x01410CA0
+#define IGP03E1000_E_PHY_ID 0x02A80390
+#define IFE_E_PHY_ID 0x02A80330
+#define IFE_PLUS_E_PHY_ID 0x02A80320
+#define IFE_C_E_PHY_ID 0x02A80310
+#define BME1000_E_PHY_ID 0x01410CB0
+#define BME1000_E_PHY_ID_R2 0x01410CB1
+#define I82577_E_PHY_ID 0x01540050
+#define I82578_E_PHY_ID 0x004DD040
+#define I82579_E_PHY_ID 0x01540090
+#define I217_E_PHY_ID 0x015400A0
+#define M88_VENDOR 0x0141
/* M88E1000 Specific Registers */
-#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
-#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
-#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
-
-#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
-#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
+#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Reg */
+#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Reg */
+#define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Reg */
+#define M88E1000_INT_STATUS 0x13 /* Interrupt Status Reg */
+#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Cntrl */
+#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */
+
+#define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */
+#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for pg number setting */
+#define M88E1000_PHY_GEN_CONTROL 0x1E /* meaning depends on reg 29 */
+#define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */
+#define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */
/* M88E1000 PHY Specific Control Register */
-#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
-#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
- /* Manual MDI configuration */
-#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
+#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
+#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reverse enabled */
+#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
+/* 1=CLK125 low, 0=CLK125 toggling */
+#define M88E1000_PSCR_CLK125_DISABLE 0x0010
+/* MDI Crossover Mode bits 6:5 Manual MDI configuration */
+#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000
+#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
-#define M88E1000_PSCR_AUTO_X_1000T 0x0040
+#define M88E1000_PSCR_AUTO_X_1000T 0x0040
/* Auto crossover enabled all speeds */
-#define M88E1000_PSCR_AUTO_X_MODE 0x0060
+#define M88E1000_PSCR_AUTO_X_MODE 0x0060
/*
- * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold)
+ * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold
* 0=Normal 10BASE-T Rx Threshold
*/
-#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
+#define M88E1000_PSCR_EN_10BT_EXT_DIST 0x0080
+/* 1=5-bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */
+#define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100
+#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */
+#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
+#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Tx */
/* M88E1000 PHY Specific Status Register */
-#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
-#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
-#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
-/* 0=<50M; 1=50-80M; 2=80-110M; 3=110-140M; 4=>140M */
-#define M88E1000_PSSR_CABLE_LENGTH 0x0380
-#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
-#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
-
-#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
-
+#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */
+#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
+#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
+#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
+/*
+ * 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-110M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define M88E1000_PSSR_CABLE_LENGTH 0x0380
+#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */
+#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
+#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */
+#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
+#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
+#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */
+#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */
+#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+
+#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
+
+/* M88E1000 Extended PHY Specific Control Register */
+#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */
+/*
+ * 1 = Lost lock detect enabled.
+ * Will assert lost lock and bring
+ * link down if idle not seen
+ * within 1ms in 1000BASE-T
+ */
+#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000
/*
* Number of times we will attempt to autonegotiate before downshifting if we
* are the master
*/
-#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
-#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_2X 0x0400
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_3X 0x0800
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_4X 0x0C00
/*
* Number of times we will attempt to autonegotiate before downshifting if we
* are the slave
*/
-#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
-#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
-#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_DIS 0x0000
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X 0x0200
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X 0x0300
+#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */
+
+/* M88E1111 Specific Registers */
+#define M88E1111_PHY_PAGE_SELECT1 0x16 /* for registers 0-28 */
+#define M88E1111_PHY_PAGE_SELECT2 0x1D /* for registers 30-31 */
+
+/* M88E1111 page select register mask */
+#define M88E1111_PHY_PAGE_SELECT_MASK1 0xFF
+#define M88E1111_PHY_PAGE_SELECT_MASK2 0x3F
/* M88EC018 Rev 2 specific DownShift settings */
-#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
-#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800
-
-#define I82578_EPSCR_DOWNSHIFT_ENABLE 0x0020
-#define I82578_EPSCR_DOWNSHIFT_COUNTER_MASK 0x001C
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_1X 0x0000
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_2X 0x0200
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_3X 0x0400
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_4X 0x0600
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_6X 0x0A00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_7X 0x0C00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_8X 0x0E00
+
+#define I82578_EPSCR_DOWNSHIFT_ENABLE 0x0020
+#define I82578_EPSCR_DOWNSHIFT_COUNTER_MASK 0x001C
/* BME1000 PHY Specific Control Register */
-#define BME1000_PSCR_ENABLE_DOWNSHIFT 0x0800 /* 1 = enable downshift */
-
-
-#define PHY_PAGE_SHIFT 5
-#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
- ((reg) & MAX_PHY_REG_ADDRESS))
+#define BME1000_PSCR_ENABLE_DOWNSHIFT 0x0800 /* 1 = enable downshift */
/*
* Bits...
* 15-5: page
* 4-0: register offset
*/
-#define GG82563_PAGE_SHIFT 5
-#define GG82563_REG(page, reg) \
+#define GG82563_PAGE_SHIFT 5
+#define GG82563_REG(page, reg) \
(((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
-#define GG82563_MIN_ALT_REG 30
+#define GG82563_MIN_ALT_REG 30
/* GG82563 Specific Registers */
-#define GG82563_PHY_SPEC_CTRL \
- GG82563_REG(0, 16) /* PHY Specific Control */
-#define GG82563_PHY_PAGE_SELECT \
- GG82563_REG(0, 22) /* Page Select */
-#define GG82563_PHY_SPEC_CTRL_2 \
- GG82563_REG(0, 26) /* PHY Specific Control 2 */
-#define GG82563_PHY_PAGE_SELECT_ALT \
- GG82563_REG(0, 29) /* Alternate Page Select */
-
-#define GG82563_PHY_MAC_SPEC_CTRL \
- GG82563_REG(2, 21) /* MAC Specific Control Register */
-
-#define GG82563_PHY_DSP_DISTANCE \
- GG82563_REG(5, 26) /* DSP Distance */
+#define GG82563_PHY_SPEC_CTRL GG82563_REG(0, 16) /* PHY Spec Cntrl */
+#define GG82563_PHY_SPEC_STATUS GG82563_REG(0, 17) /* PHY Spec Status */
+#define GG82563_PHY_INT_ENABLE GG82563_REG(0, 18) /* Interrupt Ena */
+#define GG82563_PHY_SPEC_STATUS_2 GG82563_REG(0, 19) /* PHY Spec Stat2 */
+#define GG82563_PHY_RX_ERR_CNTR GG82563_REG(0, 21) /* Rx Err Counter */
+#define GG82563_PHY_PAGE_SELECT GG82563_REG(0, 22) /* Page Select */
+#define GG82563_PHY_SPEC_CTRL_2 GG82563_REG(0, 26) /* PHY Spec Cntrl2 */
+#define GG82563_PHY_PAGE_SELECT_ALT GG82563_REG(0, 29) /* Alt Page Select */
+/* Test Clock Control (use reg. 29 to select) */
+#define GG82563_PHY_TEST_CLK_CTRL GG82563_REG(0, 30)
+
+/* MAC Specific Control Register */
+#define GG82563_PHY_MAC_SPEC_CTRL GG82563_REG(2, 21)
+#define GG82563_PHY_MAC_SPEC_CTRL_2 GG82563_REG(2, 26) /* MAC Spec Ctrl 2 */
+
+#define GG82563_PHY_DSP_DISTANCE GG82563_REG(5, 26) /* DSP Distance */
/* Page 193 - Port Control Registers */
-#define GG82563_PHY_KMRN_MODE_CTRL \
- GG82563_REG(193, 16) /* Kumeran Mode Control */
-#define GG82563_PHY_PWR_MGMT_CTRL \
- GG82563_REG(193, 20) /* Power Management Control */
+/* Kumeran Mode Control */
+#define GG82563_PHY_KMRN_MODE_CTRL GG82563_REG(193, 16)
+#define GG82563_PHY_PORT_RESET GG82563_REG(193, 17) /* Port Reset */
+#define GG82563_PHY_REVISION_ID GG82563_REG(193, 18) /* Revision ID */
+#define GG82563_PHY_DEVICE_ID GG82563_REG(193, 19) /* Device ID */
+#define GG82563_PHY_PWR_MGMT_CTRL GG82563_REG(193, 20) /* Pwr Mgt Ctrl */
+/* Rate Adaptation Control */
+#define GG82563_PHY_RATE_ADAPT_CTRL GG82563_REG(193, 25)
/* Page 194 - KMRN Registers */
-#define GG82563_PHY_INBAND_CTRL \
- GG82563_REG(194, 18) /* Inband Control */
+/* FIFO's Control/Status */
+#define GG82563_PHY_KMRN_FIFO_CTRL_STAT GG82563_REG(194, 16)
+#define GG82563_PHY_KMRN_CTRL GG82563_REG(194, 17) /* Control */
+#define GG82563_PHY_INBAND_CTRL GG82563_REG(194, 18) /* Inband Ctrl */
+#define GG82563_PHY_KMRN_DIAGNOSTIC GG82563_REG(194, 19) /* Diagnostic */
+#define GG82563_PHY_ACK_TIMEOUTS GG82563_REG(194, 20) /* Ack Timeouts */
+#define GG82563_PHY_ADV_ABILITY GG82563_REG(194, 21) /* Adver Ability */
+/* Link Partner Advertised Ability */
+#define GG82563_PHY_LINK_PARTNER_ADV_ABILITY GG82563_REG(194, 23)
+#define GG82563_PHY_ADV_NEXT_PAGE GG82563_REG(194, 24) /* Adver Next Pg */
+/* Link Partner Advertised Next page */
+#define GG82563_PHY_LINK_PARTNER_ADV_NEXT_PAGE GG82563_REG(194, 25)
+#define GG82563_PHY_KMRN_MISC GG82563_REG(194, 26) /* Misc. */
/* MDI Control */
-#define E1000_MDIC_REG_SHIFT 16
-#define E1000_MDIC_PHY_SHIFT 21
-#define E1000_MDIC_OP_WRITE 0x04000000
-#define E1000_MDIC_OP_READ 0x08000000
-#define E1000_MDIC_READY 0x10000000
-#define E1000_MDIC_ERROR 0x40000000
+#define E1000_MDIC_DATA_MASK 0x0000FFFF
+#define E1000_MDIC_REG_MASK 0x001F0000
+#define E1000_MDIC_REG_SHIFT 16
+#define E1000_MDIC_PHY_MASK 0x03E00000
+#define E1000_MDIC_PHY_SHIFT 21
+#define E1000_MDIC_OP_WRITE 0x04000000
+#define E1000_MDIC_OP_READ 0x08000000
+#define E1000_MDIC_READY 0x10000000
+#define E1000_MDIC_INT_EN 0x20000000
+#define E1000_MDIC_ERROR 0x40000000
+#define E1000_MDIC_DEST 0x80000000
/* SerDes Control */
-#define E1000_GEN_POLL_TIMEOUT 640
+#define E1000_GEN_CTL_READY 0x80000000
+#define E1000_GEN_CTL_ADDRESS_SHIFT 8
+#define E1000_GEN_POLL_TIMEOUT 640
#endif /* _E1000_DEFINES_H_ */
#include <linux/bitops.h>
#include <linux/types.h>
-#include <linux/timer.h>
-#include <linux/workqueue.h>
-#include <linux/io.h>
#include <linux/netdevice.h>
#include <linux/pci.h>
-#include <linux/pci-aspm.h>
-#include <linux/crc32.h>
#include <linux/if_vlan.h>
+#include "kcompat.h"
#include "hw.h"
struct e1000_info;
#define e_notice(format, arg...) \
netdev_notice(adapter->netdev, format, ## arg)
-
/* Interrupt modes, as used by the IntMode parameter */
#define E1000E_INT_MODE_LEGACY 0
#define E1000E_INT_MODE_MSI 1
#define E1000E_INT_MODE_MSIX 2
+#ifndef CONFIG_E1000E_NAPI
+#define E1000_MAX_INTR 10
+
+#endif /* CONFIG_E1000E_NAPI */
/* Tx/Rx descriptor defines */
#define E1000_DEFAULT_TXD 256
#define E1000_MAX_TXD 4096
#define E1000_MAX_RXD 4096
#define E1000_MIN_RXD 64
-#define E1000_MIN_ITR_USECS 10 /* 100000 irq/sec */
-#define E1000_MAX_ITR_USECS 10000 /* 100 irq/sec */
+#define E1000_MIN_ITR_USECS 10 /* 100000 irq/sec */
+#define E1000_MAX_ITR_USECS 10000 /* 100 irq/sec */
/* Early Receive defines */
#define E1000_ERT_2048 0x100
-#define E1000_FC_PAUSE_TIME 0x0680 /* 858 usec */
+#define E1000_FC_PAUSE_TIME 0x0680 /* 858 usec */
/* How many Tx Descriptors do we need to call netif_wake_queue ? */
/* How many Rx Buffers do we bundle into one write to the hardware ? */
-#define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */
+#define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */
#define AUTO_ALL_MODES 0
#define E1000_EEPROM_APME 0x0400
#define DEFAULT_JUMBO 9234
-/* BM/HV Specific Registers */
-#define BM_PORT_CTRL_PAGE 769
-
-#define PHY_UPPER_SHIFT 21
-#define BM_PHY_REG(page, reg) \
- (((reg) & MAX_PHY_REG_ADDRESS) |\
- (((page) & 0xFFFF) << PHY_PAGE_SHIFT) |\
- (((reg) & ~MAX_PHY_REG_ADDRESS) << (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)))
-
-/* PHY Wakeup Registers and defines */
-#define BM_PORT_GEN_CFG PHY_REG(BM_PORT_CTRL_PAGE, 17)
-#define BM_RCTL PHY_REG(BM_WUC_PAGE, 0)
-#define BM_WUC PHY_REG(BM_WUC_PAGE, 1)
-#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2)
-#define BM_WUS PHY_REG(BM_WUC_PAGE, 3)
-#define BM_RAR_L(_i) (BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2)))
-#define BM_RAR_M(_i) (BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2)))
-#define BM_RAR_H(_i) (BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2)))
-#define BM_RAR_CTRL(_i) (BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2)))
-#define BM_MTA(_i) (BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1)))
-
-#define BM_RCTL_UPE 0x0001 /* Unicast Promiscuous Mode */
-#define BM_RCTL_MPE 0x0002 /* Multicast Promiscuous Mode */
-#define BM_RCTL_MO_SHIFT 3 /* Multicast Offset Shift */
-#define BM_RCTL_MO_MASK (3 << 3) /* Multicast Offset Mask */
-#define BM_RCTL_BAM 0x0020 /* Broadcast Accept Mode */
-#define BM_RCTL_PMCF 0x0040 /* Pass MAC Control Frames */
-#define BM_RCTL_RFCE 0x0080 /* Rx Flow Control Enable */
-
-#define HV_STATS_PAGE 778
-#define HV_SCC_UPPER PHY_REG(HV_STATS_PAGE, 16) /* Single Collision Count */
-#define HV_SCC_LOWER PHY_REG(HV_STATS_PAGE, 17)
-#define HV_ECOL_UPPER PHY_REG(HV_STATS_PAGE, 18) /* Excessive Coll. Count */
-#define HV_ECOL_LOWER PHY_REG(HV_STATS_PAGE, 19)
-#define HV_MCC_UPPER PHY_REG(HV_STATS_PAGE, 20) /* Multiple Coll. Count */
-#define HV_MCC_LOWER PHY_REG(HV_STATS_PAGE, 21)
-#define HV_LATECOL_UPPER PHY_REG(HV_STATS_PAGE, 23) /* Late Collision Count */
-#define HV_LATECOL_LOWER PHY_REG(HV_STATS_PAGE, 24)
-#define HV_COLC_UPPER PHY_REG(HV_STATS_PAGE, 25) /* Collision Count */
-#define HV_COLC_LOWER PHY_REG(HV_STATS_PAGE, 26)
-#define HV_DC_UPPER PHY_REG(HV_STATS_PAGE, 27) /* Defer Count */
-#define HV_DC_LOWER PHY_REG(HV_STATS_PAGE, 28)
-#define HV_TNCRS_UPPER PHY_REG(HV_STATS_PAGE, 29) /* Transmit with no CRS */
-#define HV_TNCRS_LOWER PHY_REG(HV_STATS_PAGE, 30)
-
-#define E1000_FCRTV_PCH 0x05F40 /* PCH Flow Control Refresh Timer Value */
-
-/* BM PHY Copper Specific Status */
-#define BM_CS_STATUS 17
-#define BM_CS_STATUS_LINK_UP 0x0400
-#define BM_CS_STATUS_RESOLVED 0x0800
-#define BM_CS_STATUS_SPEED_MASK 0xC000
-#define BM_CS_STATUS_SPEED_1000 0x8000
-
-/* 82577 Mobile Phy Status Register */
-#define HV_M_STATUS 26
-#define HV_M_STATUS_AUTONEG_COMPLETE 0x1000
-#define HV_M_STATUS_SPEED_MASK 0x0300
-#define HV_M_STATUS_SPEED_1000 0x0200
-#define HV_M_STATUS_LINK_UP 0x0040
-
-#define E1000_ICH_FWSM_PCIM2PCI 0x01000000 /* ME PCIm-to-PCI active */
-#define E1000_ICH_FWSM_PCIM2PCI_COUNT 2000
-
/* Time to wait before putting the device into D3 if there's no link (in ms). */
#define LINK_TIMEOUT 100
* Count for polling __E1000_RESET condition every 10-20msec.
* Experimentation has shown the reset can take approximately 210msec.
*/
-#define E1000_CHECK_RESET_COUNT 25
+#define E1000_CHECK_RESET_COUNT 25
#define DEFAULT_RDTR 0
#define DEFAULT_RADV 8
E1000_TXDCTL_COUNT_DESC | \
(5 << 16) | /* wthresh must be +1 more than desired */\
(1 << 8) | /* hthresh */ \
- 0x1f) /* pthresh */
+ 0x1f) /* pthresh */
#define E1000_RXDCTL_DMA_BURST_ENABLE \
(0x01000000 | /* set descriptor granularity */ \
(4 << 16) | /* set writeback threshold */ \
(4 << 8) | /* set prefetch threshold */ \
- 0x20) /* set hthresh */
+ 0x20) /* set hthresh */
#define E1000_TIDV_FPD (1 << 31)
#define E1000_RDTR_FPD (1 << 31)
board_ich10lan,
board_pchlan,
board_pch2lan,
+ board_pch_lpt,
};
struct e1000_ps_page {
struct page *page;
- u64 dma; /* must be u64 - written to hw */
+ u64 dma; /* must be u64 - written to hw */
};
/*
struct e1000_ring {
struct e1000_adapter *adapter; /* back pointer to adapter */
- void *desc; /* pointer to ring memory */
- dma_addr_t dma; /* phys address of ring */
- unsigned int size; /* length of ring in bytes */
- unsigned int count; /* number of desc. in ring */
+ void *desc; /* pointer to ring memory */
+ dma_addr_t dma; /* phys address of ring */
+ unsigned int size; /* length of ring in bytes */
+ unsigned int count; /* number of desc. in ring */
u16 next_to_use;
u16 next_to_clean;
struct sk_buff *rx_skb_top;
};
+#ifdef SIOCGMIIPHY
/* PHY register snapshot values */
struct e1000_phy_regs {
u16 bmcr; /* basic mode control register */
u16 stat1000; /* 1000BASE-T status register */
u16 estatus; /* extended status register */
};
+#endif
/* board specific private data structure */
struct e1000_adapter {
const struct e1000_info *ei;
+#ifdef HAVE_VLAN_RX_REGISTER
+ struct vlan_group *vlgrp;
+#else
unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+#endif
u32 bd_number;
u32 rx_buffer_len;
u16 mng_vlan_id;
/*
* Tx
*/
- struct e1000_ring *tx_ring /* One per active queue */
- ____cacheline_aligned_in_smp;
+ struct e1000_ring *tx_ring /* One per active queue */
+ ____cacheline_aligned_in_smp;
+#ifdef CONFIG_E1000E_NAPI
struct napi_struct napi;
+#endif
unsigned int restart_queue;
u32 txd_cmd;
/*
* Rx
*/
+#ifdef CONFIG_E1000E_NAPI
bool (*clean_rx) (struct e1000_ring *ring, int *work_done,
- int work_to_do) ____cacheline_aligned_in_smp;
+ int work_to_do)____cacheline_aligned_in_smp;
+#else
+ bool (*clean_rx) (struct e1000_ring *ring)____cacheline_aligned_in_smp;
+#endif
void (*alloc_rx_buf) (struct e1000_ring *ring, int cleaned_count,
gfp_t gfp);
struct e1000_ring *rx_ring;
unsigned int rx_ps_pages;
u16 rx_ps_bsize0;
+#ifndef CONFIG_E1000E_NAPI
+ u64 rx_dropped_backlog; /* count drops from rx int handler */
+#endif
u32 max_frame_size;
u32 min_frame_size;
/* OS defined structs */
struct net_device *netdev;
struct pci_dev *pdev;
+#ifndef HAVE_NETDEV_STATS_IN_NETDEV
+ struct net_device_stats net_stats;
+#endif
/* structs defined in e1000_hw.h */
struct e1000_hw hw;
+#ifdef HAVE_NDO_GET_STATS64
spinlock_t stats64_lock;
+#endif
struct e1000_hw_stats stats;
struct e1000_phy_info phy_info;
struct e1000_phy_stats phy_stats;
+#ifdef SIOCGMIIPHY
/* Snapshot of PHY registers */
struct e1000_phy_regs phy_regs;
+#endif
struct e1000_ring test_tx_ring;
struct e1000_ring test_rx_ring;
bool fc_autoneg;
+#ifndef HAVE_ETHTOOL_SET_PHYS_ID
+ unsigned long led_status;
+
+#endif
unsigned int flags;
unsigned int flags2;
struct work_struct downshift_task;
struct work_struct update_phy_task;
+#ifndef HAVE_ETHTOOL_SET_PHYS_ID
+ struct work_struct led_blink_task;
+#endif
struct work_struct print_hang_task;
+ u32 *config_space;
bool idle_check;
+ int node; /* store the node to allocate memory on */
int phy_hang_count;
u16 tx_ring_count;
};
struct e1000_info {
- enum e1000_mac_type mac;
- unsigned int flags;
- unsigned int flags2;
- u32 pba;
- u32 max_hw_frame_size;
- s32 (*get_variants)(struct e1000_adapter *);
- struct e1000_mac_operations *mac_ops;
- struct e1000_phy_operations *phy_ops;
- struct e1000_nvm_operations *nvm_ops;
+ enum e1000_mac_type mac;
+ unsigned int flags;
+ unsigned int flags2;
+ u32 pba;
+ u32 max_hw_frame_size;
+ s32(*get_variants) (struct e1000_adapter *);
+ void (*init_ops) (struct e1000_hw *);
};
/* hardware capability, feature, and workaround flags */
#define FLAG_HAS_CTRLEXT_ON_LOAD (1 << 5)
#define FLAG_HAS_SWSM_ON_LOAD (1 << 6)
#define FLAG_HAS_JUMBO_FRAMES (1 << 7)
-#define FLAG_READ_ONLY_NVM (1 << 8)
+/* reserved bit8 */
#define FLAG_IS_ICH (1 << 9)
#define FLAG_HAS_MSIX (1 << 10)
#define FLAG_HAS_SMART_POWER_DOWN (1 << 11)
#define FLAG_LSC_GIG_SPEED_DROP (1 << 25)
#define FLAG_SMART_POWER_DOWN (1 << 26)
#define FLAG_MSI_ENABLED (1 << 27)
+#ifndef HAVE_NDO_SET_FEATURES
+#define FLAG_RX_CSUM_ENABLED (1 << 28)
+#else
/* reserved (1 << 28) */
+#endif
#define FLAG_TSO_FORCE (1 << 29)
#define FLAG_RX_RESTART_NOW (1 << 30)
#define FLAG_MSI_TEST_FAILED (1 << 31)
#define FLAG2_CHECK_PHY_HANG (1 << 9)
#define FLAG2_NO_DISABLE_RX (1 << 10)
#define FLAG2_PCIM2PCI_ARBITER_WA (1 << 11)
+#define FLAG2_DFLT_CRC_STRIPPING (1 << 12)
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
extern void e1000e_check_options(struct e1000_adapter *adapter);
extern void e1000e_set_ethtool_ops(struct net_device *netdev);
+#ifndef HAVE_ETHTOOL_SET_PHYS_ID
+extern void e1000e_led_blink_task(struct work_struct *work);
+#endif
+#ifdef ETHTOOL_OPS_COMPAT
+extern int ethtool_ioctl(struct ifreq *ifr);
+#endif
extern int e1000e_up(struct e1000_adapter *adapter);
extern void e1000e_down(struct e1000_adapter *adapter);
extern int e1000e_setup_tx_resources(struct e1000_ring *ring);
extern void e1000e_free_rx_resources(struct e1000_ring *ring);
extern void e1000e_free_tx_resources(struct e1000_ring *ring);
-extern struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev,
- struct rtnl_link_stats64
- *stats);
+#ifdef HAVE_NDO_GET_STATS64
+extern struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev, struct rtnl_link_stats64
+ *stats);
+#else /* HAVE_NDO_GET_STATS64 */
+extern void e1000e_update_stats(struct e1000_adapter *adapter);
+#endif /* HAVE_NDO_GET_STATS64 */
extern void e1000e_set_interrupt_capability(struct e1000_adapter *adapter);
extern void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter);
extern void e1000e_get_hw_control(struct e1000_adapter *adapter);
extern unsigned int copybreak;
-extern char *e1000e_get_hw_dev_name(struct e1000_hw *hw);
-
-extern struct e1000_info e1000_82571_info;
-extern struct e1000_info e1000_82572_info;
-extern struct e1000_info e1000_82573_info;
-extern struct e1000_info e1000_82574_info;
-extern struct e1000_info e1000_82583_info;
-extern struct e1000_info e1000_ich8_info;
-extern struct e1000_info e1000_ich9_info;
-extern struct e1000_info e1000_ich10_info;
-extern struct e1000_info e1000_pch_info;
-extern struct e1000_info e1000_pch2_info;
-extern struct e1000_info e1000_es2_info;
+extern void e1000_init_function_pointers_82571(struct e1000_hw *hw);
+extern void e1000_init_function_pointers_80003es2lan(struct e1000_hw *hw);
+extern void e1000_init_function_pointers_ich8lan(struct e1000_hw *hw);
-extern s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
- u32 pba_num_size);
+static inline s32 e1000e_commit_phy(struct e1000_hw *hw)
+{
+ if (hw->phy.ops.commit)
+ return hw->phy.ops.commit(hw);
-extern s32 e1000e_commit_phy(struct e1000_hw *hw);
+ return 0;
+}
extern bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw);
extern bool e1000e_get_laa_state_82571(struct e1000_hw *hw);
extern void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state);
-extern void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw);
extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
- bool state);
+ bool state);
extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
extern void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
-extern void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw);
-extern void e1000_resume_workarounds_pchlan(struct e1000_hw *hw);
-extern s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
-extern s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);
-extern void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw);
+extern void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw);
extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw);
extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw);
extern s32 e1000e_check_for_serdes_link(struct e1000_hw *hw);
-extern s32 e1000e_setup_led_generic(struct e1000_hw *hw);
extern s32 e1000e_cleanup_led_generic(struct e1000_hw *hw);
extern s32 e1000e_led_on_generic(struct e1000_hw *hw);
extern s32 e1000e_led_off_generic(struct e1000_hw *hw);
extern s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw);
-extern void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw);
-extern void e1000_set_lan_id_single_port(struct e1000_hw *hw);
-extern s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex);
-extern s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex);
+extern s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex);
+extern s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw,
+ u16 *speed, u16 *duplex);
extern s32 e1000e_disable_pcie_master(struct e1000_hw *hw);
extern s32 e1000e_get_auto_rd_done(struct e1000_hw *hw);
extern s32 e1000e_id_led_init(struct e1000_hw *hw);
extern s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw);
extern s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw);
extern s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw);
-extern s32 e1000e_setup_link(struct e1000_hw *hw);
+extern s32 e1000e_setup_link_generic(struct e1000_hw *hw);
extern void e1000_clear_vfta_generic(struct e1000_hw *hw);
extern void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
extern void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
extern void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop);
extern s32 e1000e_get_hw_semaphore(struct e1000_hw *hw);
extern s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data);
-extern void e1000e_config_collision_dist(struct e1000_hw *hw);
extern s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw);
extern s32 e1000e_force_mac_fc(struct e1000_hw *hw);
extern s32 e1000e_blink_led_generic(struct e1000_hw *hw);
-extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
-extern s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw);
+extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset,
+ u32 value);
extern void e1000e_reset_adaptive(struct e1000_hw *hw);
extern void e1000e_update_adaptive(struct e1000_hw *hw);
extern s32 e1000e_setup_copper_link(struct e1000_hw *hw);
-extern s32 e1000e_get_phy_id(struct e1000_hw *hw);
extern void e1000e_put_hw_semaphore(struct e1000_hw *hw);
-extern s32 e1000e_check_reset_block_generic(struct e1000_hw *hw);
extern s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw);
extern s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw);
extern s32 e1000e_get_phy_info_igp(struct e1000_hw *hw);
-extern s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page);
extern s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
-extern s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset,
- u16 *data);
extern s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw);
extern s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active);
extern s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
-extern s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset,
- u16 data);
extern s32 e1000e_phy_sw_reset(struct e1000_hw *hw);
extern s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw);
extern s32 e1000e_get_cfg_done(struct e1000_hw *hw);
extern s32 e1000e_get_phy_info_m88(struct e1000_hw *hw);
extern s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data);
-extern s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw);
extern enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id);
extern s32 e1000e_determine_phy_address(struct e1000_hw *hw);
extern s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data);
-extern s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw,
- u16 *phy_reg);
-extern s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw,
- u16 *phy_reg);
-extern s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data);
-extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data);
-extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
+extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw,
+ u16 *phy_ctrl);
extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
-extern s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
- u16 data);
extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
-extern s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
- u16 *data);
extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
- u32 usec_interval, bool *success);
+ u32 usec_interval, bool *success);
extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
-extern void e1000_power_up_phy_copper(struct e1000_hw *hw);
-extern void e1000_power_down_phy_copper(struct e1000_hw *hw);
extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_check_downshift(struct e1000_hw *hw);
-extern s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data);
-extern s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
- u16 *data);
-extern s32 e1000_read_phy_reg_page_hv(struct e1000_hw *hw, u32 offset,
- u16 *data);
-extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data);
-extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
- u16 data);
-extern s32 e1000_write_phy_reg_page_hv(struct e1000_hw *hw, u32 offset,
- u16 data);
-extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw);
-extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw);
-extern s32 e1000_check_polarity_82577(struct e1000_hw *hw);
-extern s32 e1000_get_phy_info_82577(struct e1000_hw *hw);
-extern s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw);
-extern s32 e1000_get_cable_length_82577(struct e1000_hw *hw);
-
-extern s32 e1000_check_polarity_m88(struct e1000_hw *hw);
-extern s32 e1000_get_phy_info_ife(struct e1000_hw *hw);
-extern s32 e1000_check_polarity_ife(struct e1000_hw *hw);
-extern s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw);
-extern s32 e1000_check_polarity_igp(struct e1000_hw *hw);
extern bool e1000_check_phy_82574(struct e1000_hw *hw);
static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw)
{
- return hw->phy.ops.reset(hw);
-}
+ if (hw->phy.ops.reset)
+ return hw->phy.ops.reset(hw);
-static inline s32 e1000_check_reset_block(struct e1000_hw *hw)
-{
- return hw->phy.ops.check_reset_block(hw);
+ return 0;
}
static inline s32 e1e_rphy(struct e1000_hw *hw, u32 offset, u16 *data)
{
- return hw->phy.ops.read_reg(hw, offset, data);
+ if (hw->phy.ops.read_reg)
+ return hw->phy.ops.read_reg(hw, offset, data);
+
+ return 0;
}
static inline s32 e1e_wphy(struct e1000_hw *hw, u32 offset, u16 data)
{
- return hw->phy.ops.write_reg(hw, offset, data);
+ if (hw->phy.ops.write_reg)
+ return hw->phy.ops.write_reg(hw, offset, data);
+
+ return 0;
}
static inline s32 e1000_get_cable_length(struct e1000_hw *hw)
{
- return hw->phy.ops.get_cable_length(hw);
+ if (hw->phy.ops.get_cable_length)
+ return hw->phy.ops.get_cable_length(hw);
+
+ return 0;
}
extern s32 e1000e_acquire_nvm(struct e1000_hw *hw);
-extern s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+extern s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
extern s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw);
extern s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg);
-extern s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+extern s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
extern s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw);
extern void e1000e_release_nvm(struct e1000_hw *hw);
-extern void e1000e_reload_nvm(struct e1000_hw *hw);
-extern s32 e1000_read_mac_addr_generic(struct e1000_hw *hw);
static inline s32 e1000e_read_mac_addr(struct e1000_hw *hw)
{
return hw->nvm.ops.update(hw);
}
-static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
{
return hw->nvm.ops.read(hw, offset, words, data);
}
-static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
{
return hw->nvm.ops.write(hw, offset, words, data);
}
static inline s32 e1000_get_phy_info(struct e1000_hw *hw)
{
- return hw->phy.ops.get_info(hw);
-}
+ if (hw->phy.ops.get_info)
+ return hw->phy.ops.get_info(hw);
-static inline s32 e1000e_check_mng_mode(struct e1000_hw *hw)
-{
- return hw->mac.ops.check_mng_mode(hw);
+ return 0;
}
-extern bool e1000e_check_mng_mode_generic(struct e1000_hw *hw);
extern bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw);
-extern s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length);
+extern s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer,
+ u16 length);
static inline u32 __er32(struct e1000_hw *hw, unsigned long reg)
{
return readl(hw->hw_addr + reg);
}
+#define er32(reg) __er32(hw, E1000_##reg)
+
+/**
+ * __ew32_prepare - prepare to write to MAC CSR register on certain parts
+ * @hw: pointer to the HW structure
+ *
+ * When updating the MAC CSR registers, the Manageability Engine (ME) could
+ * be accessing the registers at the same time. Normally, this is handled in
+ * h/w by an arbiter but on some parts there is a bug that acknowledges Host
+ * accesses later than it should which could result in the register to have
+ * an incorrect value. Workaround this by checking the FWSM register which
+ * has bit 24 set while ME is accessing MAC CSR registers, wait if it is set
+ * and try again a number of times.
+ **/
+static inline s32 __ew32_prepare(struct e1000_hw *hw)
+{
+ s32 i = E1000_ICH_FWSM_PCIM2PCI_COUNT;
+
+ while ((er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI) && --i)
+ udelay(50);
+
+ return i;
+}
+
static inline void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val)
{
+ if (hw->adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+ __ew32_prepare(hw);
+
writel(val, hw->hw_addr + reg);
}
+#define ew32(reg, val) __ew32(hw, E1000_##reg, (val))
+
+#define e1e_flush() er32(STATUS)
+
+#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) ( \
+ __ew32((a), (reg + ((offset) << 2)), (value)))
+
+#define E1000_READ_REG_ARRAY(a, reg, offset) ( \
+ readl((a)->hw_addr + reg + ((offset) << 2)))
+
+static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
+{
+ return readw(hw->flash_address + reg);
+}
+
+static inline u32 __er32flash(struct e1000_hw *hw, unsigned long reg)
+{
+ return readl(hw->flash_address + reg);
+}
+
+static inline void __ew16flash(struct e1000_hw *hw, unsigned long reg, u16 val)
+{
+ writew(val, hw->flash_address + reg);
+}
+
+static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
+{
+ writel(val, hw->flash_address + reg);
+}
+
+#define er16flash(reg) __er16flash(hw, (reg))
+#define er32flash(reg) __er32flash(hw, (reg))
+#define ew16flash(reg, val) __ew16flash(hw, (reg), (val))
+#define ew32flash(reg, val) __ew32flash(hw, (reg), (val))
+
#endif /* _E1000_H_ */
#include <linux/netdevice.h>
#include <linux/interrupt.h>
+#ifdef SIOCETHTOOL
#include <linux/ethtool.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include "e1000.h"
+#ifndef HAVE_NETDEV_VLAN_FEATURES
+#include <linux/if_vlan.h>
+#endif
+#ifdef ETHTOOL_OPS_COMPAT
+#include "kcompat_ethtool.c"
+#endif
-enum {NETDEV_STATS, E1000_STATS};
+enum { NETDEV_STATS, E1000_STATS };
struct e1000_stats {
char stat_string[ETH_GSTRING_LEN];
.type = E1000_STATS, \
.sizeof_stat = sizeof(((struct e1000_adapter *)0)->m), \
.stat_offset = offsetof(struct e1000_adapter, m) }
+#ifdef HAVE_NDO_GET_STATS64
#define E1000_NETDEV_STAT(str, m) { \
.stat_string = str, \
.type = NETDEV_STATS, \
.sizeof_stat = sizeof(((struct rtnl_link_stats64 *)0)->m), \
.stat_offset = offsetof(struct rtnl_link_stats64, m) }
+#elif defined(HAVE_NETDEV_STATS_IN_NETDEV)
+#define E1000_NETDEV_STAT(str, m) { \
+ .stat_string = str, \
+ .type = NETDEV_STATS, \
+ .sizeof_stat = sizeof(((struct net_device *)0)->m), \
+ .stat_offset = offsetof(struct net_device, m) }
+#else /* HAVE_NETDEV_STATS_IN_NETDEV */
+#define E1000_NETDEV_STAT(str, m) E1000_STAT(str, net_##m)
+#endif /* HAVE_NETDEV_STATS_IN_NETDEV */
static const struct e1000_stats e1000_gstrings_stats[] = {
E1000_STAT("rx_packets", stats.gprc),
E1000_STAT("tx_broadcast", stats.bptc),
E1000_STAT("rx_multicast", stats.mprc),
E1000_STAT("tx_multicast", stats.mptc),
+#ifdef HAVE_NDO_GET_STATS64
E1000_NETDEV_STAT("rx_errors", rx_errors),
E1000_NETDEV_STAT("tx_errors", tx_errors),
+#else /* HAVE_NDO_GET_STATS64 */
+ E1000_NETDEV_STAT("rx_errors", stats.rx_errors),
+ E1000_NETDEV_STAT("tx_errors", stats.tx_errors),
+#endif /* HAVE_NDO_GET_STATS64 */
+#ifndef CONFIG_E1000E_NAPI
+ E1000_STAT("rx_dropped_backlog", rx_dropped_backlog),
+#endif
+#ifdef HAVE_NDO_GET_STATS64
E1000_NETDEV_STAT("tx_dropped", tx_dropped),
+#else /* HAVE_NDO_GET_STATS64 */
+ E1000_NETDEV_STAT("tx_dropped", stats.tx_dropped),
+#endif /* HAVE_NDO_GET_STATS64 */
E1000_STAT("multicast", stats.mprc),
E1000_STAT("collisions", stats.colc),
+#ifdef HAVE_NDO_GET_STATS64
E1000_NETDEV_STAT("rx_length_errors", rx_length_errors),
E1000_NETDEV_STAT("rx_over_errors", rx_over_errors),
+#else /* HAVE_NDO_GET_STATS64 */
+ E1000_NETDEV_STAT("rx_length_errors", stats.rx_length_errors),
+ E1000_NETDEV_STAT("rx_over_errors", stats.rx_over_errors),
+#endif /* HAVE_NDO_GET_STATS64 */
E1000_STAT("rx_crc_errors", stats.crcerrs),
+#ifdef HAVE_NDO_GET_STATS64
E1000_NETDEV_STAT("rx_frame_errors", rx_frame_errors),
+#else /* HAVE_NDO_GET_STATS64 */
+ E1000_NETDEV_STAT("rx_frame_errors", stats.rx_frame_errors),
+#endif /* HAVE_NDO_GET_STATS64 */
E1000_STAT("rx_no_buffer_count", stats.rnbc),
E1000_STAT("rx_missed_errors", stats.mpc),
E1000_STAT("tx_aborted_errors", stats.ecol),
E1000_STAT("tx_carrier_errors", stats.tncrs),
+#ifdef HAVE_NDO_GET_STATS64
E1000_NETDEV_STAT("tx_fifo_errors", tx_fifo_errors),
E1000_NETDEV_STAT("tx_heartbeat_errors", tx_heartbeat_errors),
+#else /* HAVE_NDO_GET_STATS64 */
+ E1000_NETDEV_STAT("tx_fifo_errors", stats.tx_fifo_errors),
+ E1000_NETDEV_STAT("tx_heartbeat_errors", stats.tx_heartbeat_errors),
+#endif /* HAVE_NDO_GET_STATS64 */
E1000_STAT("tx_window_errors", stats.latecol),
E1000_STAT("tx_abort_late_coll", stats.latecol),
E1000_STAT("tx_deferred_ok", stats.dc),
"Interrupt test (offline)", "Loopback test (offline)",
"Link test (on/offline)"
};
+
#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)
static int e1000_get_settings(struct net_device *netdev,
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
- SUPPORTED_Autoneg |
- SUPPORTED_TP);
+ SUPPORTED_Autoneg | SUPPORTED_TP);
if (hw->phy.type == e1000_phy_ife)
ecmd->supported &= ~SUPPORTED_1000baseT_Full;
ecmd->advertising = ADVERTISED_TP;
ecmd->transceiver = XCVR_INTERNAL;
} else {
- ecmd->supported = (SUPPORTED_1000baseT_Full |
- SUPPORTED_FIBRE |
- SUPPORTED_Autoneg);
+ ecmd->supported = (SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE | SUPPORTED_Autoneg);
ecmd->advertising = (ADVERTISED_1000baseT_Full |
- ADVERTISED_FIBRE |
- ADVERTISED_Autoneg);
+ ADVERTISED_FIBRE | ADVERTISED_Autoneg);
ecmd->port = PORT_FIBRE;
ecmd->transceiver = XCVR_EXTERNAL;
ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+#ifdef ETH_TP_MDI_X
/* MDI-X => 2; MDI =>1; Invalid =>0 */
if ((hw->phy.media_type == e1000_media_type_copper) &&
netif_carrier_ok(netdev))
- ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
- ETH_TP_MDI;
+ ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X : ETH_TP_MDI;
else
ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
+#endif /* ETH_TP_MDI_X */
return 0;
}
/* Fiber NICs only allow 1000 gbps Full duplex */
if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
- spd != SPEED_1000 &&
- dplx != DUPLEX_FULL) {
+ spd != SPEED_1000 && dplx != DUPLEX_FULL) {
goto err_inval;
}
mac->autoneg = 1;
adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
break;
- case SPEED_1000 + DUPLEX_HALF: /* not supported */
+ case SPEED_1000 + DUPLEX_HALF: /* not supported */
default:
goto err_inval;
}
* When SoL/IDER sessions are active, autoneg/speed/duplex
* cannot be changed
*/
- if (e1000_check_reset_block(hw)) {
- e_err("Cannot change link characteristics when SoL/IDER is "
- "active.\n");
+ if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw)) {
+ e_err("Cannot change link characteristics when SoL/IDER is active.\n");
return -EINVAL;
}
hw->mac.autoneg = 1;
if (hw->phy.media_type == e1000_media_type_fiber)
hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full |
- ADVERTISED_FIBRE |
- ADVERTISED_Autoneg;
+ ADVERTISED_FIBRE | ADVERTISED_Autoneg;
else
hw->phy.autoneg_advertised = ecmd->advertising |
- ADVERTISED_TP |
- ADVERTISED_Autoneg;
+ ADVERTISED_TP | ADVERTISED_Autoneg;
ecmd->advertising = hw->phy.autoneg_advertised;
if (adapter->fc_autoneg)
hw->fc.requested_mode = e1000_fc_default;
struct e1000_hw *hw = &adapter->hw;
pause->autoneg =
- (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
+ (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
if (hw->fc.current_mode == e1000_fc_rx_pause) {
pause->rx_pause = 1;
return retval;
}
+#ifndef HAVE_NDO_SET_FEATURES
+static u32 e1000_get_rx_csum(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ return adapter->flags & FLAG_RX_CSUM_ENABLED;
+}
+
+static int e1000_set_rx_csum(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (data)
+ adapter->flags |= FLAG_RX_CSUM_ENABLED;
+ else
+ adapter->flags &= ~FLAG_RX_CSUM_ENABLED;
+
+ if (netif_running(netdev))
+ e1000e_reinit_locked(adapter);
+ else
+ e1000e_reset(adapter);
+ return 0;
+}
+
+static u32 e1000_get_tx_csum(struct net_device *netdev)
+{
+ return (netdev->features & NETIF_F_HW_CSUM) != 0;
+}
+
+static int e1000_set_tx_csum(struct net_device *netdev, u32 data)
+{
+ if (data)
+ netdev->features |= NETIF_F_HW_CSUM;
+ else
+ netdev->features &= ~NETIF_F_HW_CSUM;
+
+ return 0;
+}
+
+#ifdef NETIF_F_TSO
+static int e1000_set_tso(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+#ifndef HAVE_NETDEV_VLAN_FEATURES
+ int i;
+ struct net_device *v_netdev;
+#endif /* HAVE_NETDEV_VLAN_FEATURES */
+
+ if (data) {
+ netdev->features |= NETIF_F_TSO;
+#ifdef NETIF_F_TSO6
+ netdev->features |= NETIF_F_TSO6;
+#endif
+ } else {
+ netdev->features &= ~NETIF_F_TSO;
+#ifdef NETIF_F_TSO6
+ netdev->features &= ~NETIF_F_TSO6;
+#endif
+#ifndef HAVE_NETDEV_VLAN_FEATURES
+ /* disable TSO on all VLANs if they're present */
+ if (!adapter->vlgrp)
+ goto tso_out;
+ for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
+ v_netdev = vlan_group_get_device(adapter->vlgrp, i);
+ if (!v_netdev)
+ continue;
+
+ v_netdev->features &= ~NETIF_F_TSO;
+#ifdef NETIF_F_TSO6
+ v_netdev->features &= ~NETIF_F_TSO6;
+#endif
+ vlan_group_set_device(adapter->vlgrp, i, v_netdev);
+ }
+#endif /* HAVE_NETDEV_VLAN_FEATURES */
+ }
+
+#ifndef HAVE_NETDEV_VLAN_FEATURES
+tso_out:
+#endif /* HAVE_NETDEV_VLAN_FEATURES */
+ adapter->flags |= FLAG_TSO_FORCE;
+ return 0;
+}
+
+#endif /* NETIF_F_TSO */
+#if defined(ETHTOOL_SFLAGS) && (defined(NETIF_F_RXHASH) || !defined(HAVE_VLAN_RX_REGISTER))
+static int e1000e_set_flags(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ u32 supported = 0, changed = netdev->features ^ data;
+ int rc;
+
+#ifdef NETIF_F_RXHASH
+ supported |= ETH_FLAG_RXHASH;
+#endif
+#ifndef HAVE_VLAN_RX_REGISTER
+ supported |= ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN;
+#endif
+
+ rc = ethtool_op_set_flags(netdev, data, supported);
+
+ if (rc)
+ return rc;
+
+ if (changed & supported) {
+ if (netif_running(netdev))
+ e1000e_reinit_locked(adapter);
+ else
+ e1000e_reset(adapter);
+ }
+
+ return 0;
+}
+
+#endif /* ETHTOOL_SFLAGS */
+#endif /* HAVE_NDO_SET_FEATURES */
static u32 e1000_get_msglevel(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
static int e1000_get_regs_len(struct net_device *netdev)
{
-#define E1000_REGS_LEN 32 /* overestimate */
+#define E1000_REGS_LEN 32 /* overestimate */
return E1000_REGS_LEN * sizeof(u32);
}
struct e1000_hw *hw = &adapter->hw;
u32 *regs_buff = p;
u16 phy_data;
+ u8 revision_id;
memset(p, 0, E1000_REGS_LEN * sizeof(u32));
- regs->version = (1 << 24) | (adapter->pdev->revision << 16) |
- adapter->pdev->device;
+ pci_read_config_byte(adapter->pdev, PCI_REVISION_ID, &revision_id);
- regs_buff[0] = er32(CTRL);
- regs_buff[1] = er32(STATUS);
+ regs->version = (1 << 24) | (revision_id << 16) | adapter->pdev->device;
- regs_buff[2] = er32(RCTL);
- regs_buff[3] = er32(RDLEN);
- regs_buff[4] = er32(RDH);
- regs_buff[5] = er32(RDT);
- regs_buff[6] = er32(RDTR);
+ regs_buff[0] = er32(CTRL);
+ regs_buff[1] = er32(STATUS);
- regs_buff[7] = er32(TCTL);
- regs_buff[8] = er32(TDLEN);
- regs_buff[9] = er32(TDH);
- regs_buff[10] = er32(TDT);
+ regs_buff[2] = er32(RCTL);
+ regs_buff[3] = er32(RDLEN(0));
+ regs_buff[4] = er32(RDH(0));
+ regs_buff[5] = er32(RDT(0));
+ regs_buff[6] = er32(RDTR);
+
+ regs_buff[7] = er32(TCTL);
+ regs_buff[8] = er32(TDLEN(0));
+ regs_buff[9] = er32(TDH(0));
+ regs_buff[10] = er32(TDT(0));
regs_buff[11] = er32(TIDV);
- regs_buff[12] = adapter->hw.phy.type; /* PHY type (IGP=1, M88=0) */
+ regs_buff[12] = adapter->hw.phy.type; /* PHY type (IGP=1, M88=0) */
/* ethtool doesn't use anything past this point, so all this
* code is likely legacy junk for apps that may or may not
* exist */
if (hw->phy.type == e1000_phy_m88) {
e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
- regs_buff[13] = (u32)phy_data; /* cable length */
- regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */
- regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */
- regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[13] = (u32)phy_data; /* cable length */
+ regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */
e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- regs_buff[17] = (u32)phy_data; /* extended 10bt distance */
- regs_buff[18] = regs_buff[13]; /* cable polarity */
- regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */
- regs_buff[20] = regs_buff[17]; /* polarity correction */
+ regs_buff[17] = (u32)phy_data; /* extended 10bt distance */
+ regs_buff[18] = regs_buff[13]; /* cable polarity */
+ regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[20] = regs_buff[17]; /* polarity correction */
/* phy receive errors */
regs_buff[22] = adapter->phy_stats.receive_errors;
- regs_buff[23] = regs_buff[13]; /* mdix mode */
+ regs_buff[23] = regs_buff[13]; /* mdix mode */
}
- regs_buff[21] = 0; /* was idle_errors */
+ regs_buff[21] = 0; /* was idle_errors */
e1e_rphy(hw, PHY_1000T_STATUS, &phy_data);
- regs_buff[24] = (u32)phy_data; /* phy local receiver status */
- regs_buff[25] = regs_buff[24]; /* phy remote receiver status */
+ regs_buff[24] = (u32)phy_data; /* phy local receiver status */
+ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */
}
static int e1000_get_eeprom_len(struct net_device *netdev)
last_word = (eeprom->offset + eeprom->len - 1) >> 1;
eeprom_buff = kmalloc(sizeof(u16) *
- (last_word - first_word + 1), GFP_KERNEL);
+ (last_word - first_word + 1), GFP_KERNEL);
if (!eeprom_buff)
return -ENOMEM;
} else {
for (i = 0; i < last_word - first_word + 1; i++) {
ret_val = e1000_read_nvm(hw, first_word + i, 1,
- &eeprom_buff[i]);
+ &eeprom_buff[i]);
if (ret_val)
break;
}
if (eeprom->len == 0)
return -EOPNOTSUPP;
- if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16)))
+ if (eeprom->magic !=
+ (adapter->pdev->vendor | (adapter->pdev->device << 16)))
return -EFAULT;
- if (adapter->flags & FLAG_READ_ONLY_NVM)
- return -EINVAL;
-
max_len = hw->nvm.word_size * 2;
first_word = eeprom->offset >> 1;
/* need read/modify/write of last changed EEPROM word */
/* only the first byte of the word is being modified */
ret_val = e1000_read_nvm(hw, last_word, 1,
- &eeprom_buff[last_word - first_word]);
+ &eeprom_buff[last_word - first_word]);
if (ret_val)
goto out;
*/
if ((first_word <= NVM_CHECKSUM_REG) ||
(hw->mac.type == e1000_82583) ||
- (hw->mac.type == e1000_82574) ||
- (hw->mac.type == e1000_82573))
+ (hw->mac.type == e1000_82574) || (hw->mac.type == e1000_82573))
ret_val = e1000e_update_nvm_checksum(hw);
out:
struct ethtool_drvinfo *drvinfo)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- char firmware_version[32];
- strncpy(drvinfo->driver, e1000e_driver_name,
- sizeof(drvinfo->driver) - 1);
- strncpy(drvinfo->version, e1000e_driver_version,
- sizeof(drvinfo->version) - 1);
+ strlcpy(drvinfo->driver, e1000e_driver_name, sizeof(drvinfo->driver));
+ strlcpy(drvinfo->version, e1000e_driver_version,
+ sizeof(drvinfo->version));
/*
* EEPROM image version # is reported as firmware version # for
* PCI-E controllers
*/
- snprintf(firmware_version, sizeof(firmware_version), "%d.%d-%d",
- (adapter->eeprom_vers & 0xF000) >> 12,
- (adapter->eeprom_vers & 0x0FF0) >> 4,
- (adapter->eeprom_vers & 0x000F));
-
- strncpy(drvinfo->fw_version, firmware_version,
- sizeof(drvinfo->fw_version) - 1);
- strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
- sizeof(drvinfo->bus_info) - 1);
+ snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
+ "%d.%d-%d",
+ (adapter->eeprom_vers & 0xF000) >> 12,
+ (adapter->eeprom_vers & 0x0FF0) >> 4,
+ (adapter->eeprom_vers & 0x000F));
+
+ strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
+ sizeof(drvinfo->bus_info));
drvinfo->regdump_len = e1000_get_regs_len(netdev);
drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
}
{
u32 pat, val;
static const u32 test[] = {
- 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+ 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF
+ };
for (pat = 0; pat < ARRAY_SIZE(test); pat++) {
E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset,
(test[pat] & write));
val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset);
if (val != (test[pat] & write & mask)) {
- e_err("pattern test reg %04X failed: got 0x%08X "
- "expected 0x%08X\n", reg + offset, val,
- (test[pat] & write & mask));
+ e_err("pattern test reg %04X failed: got 0x%08X expected 0x%08X\n",
+ reg + offset, val, (test[pat] & write & mask));
*data = reg;
return 1;
}
__ew32(&adapter->hw, reg, write & mask);
val = __er32(&adapter->hw, reg);
if ((write & mask) != (val & mask)) {
- e_err("set/check reg %04X test failed: got 0x%08X "
- "expected 0x%08X\n", reg, (val & mask), (write & mask));
+ e_err("set/check reg %04X test failed: got 0x%08X expected 0x%08X\n",
+ reg, (val & mask), (write & mask));
*data = reg;
return 1;
}
return 0;
}
+
#define REG_PATTERN_TEST_ARRAY(reg, offset, mask, write) \
do { \
if (reg_pattern_test(adapter, data, reg, offset, mask, write)) \
u32 i;
u32 toggle;
u32 mask;
+ u32 wlock_mac = 0;
/*
* The status register is Read Only, so a write should fail.
* Some bits that get toggled are ignored.
*/
switch (mac->type) {
- /* there are several bits on newer hardware that are r/w */
+ /* there are several bits on newer hardware that are r/w */
case e1000_82571:
case e1000_82572:
case e1000_80003es2lan:
toggle = 0x7FFFF3FF;
break;
- default:
+ default:
toggle = 0x7FFFF033;
break;
}
ew32(STATUS, toggle);
after = er32(STATUS) & toggle;
if (value != after) {
- e_err("failed STATUS register test got: 0x%08X expected: "
- "0x%08X\n", after, value);
+ e_err("failed STATUS register test got: 0x%08X expected: 0x%08X\n",
+ after, value);
*data = 1;
return 1;
}
}
REG_PATTERN_TEST(E1000_RDTR, 0x0000FFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(E1000_RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(E1000_RDLEN, 0x000FFF80, 0x000FFFFF);
- REG_PATTERN_TEST(E1000_RDH, 0x0000FFFF, 0x0000FFFF);
- REG_PATTERN_TEST(E1000_RDT, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(E1000_RDBAH(0), 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(E1000_RDLEN(0), 0x000FFF80, 0x000FFFFF);
+ REG_PATTERN_TEST(E1000_RDH(0), 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(E1000_RDT(0), 0x0000FFFF, 0x0000FFFF);
REG_PATTERN_TEST(E1000_FCRTH, 0x0000FFF8, 0x0000FFF8);
REG_PATTERN_TEST(E1000_FCTTV, 0x0000FFFF, 0x0000FFFF);
REG_PATTERN_TEST(E1000_TIPG, 0x3FFFFFFF, 0x3FFFFFFF);
- REG_PATTERN_TEST(E1000_TDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(E1000_TDLEN, 0x000FFF80, 0x000FFFFF);
+ REG_PATTERN_TEST(E1000_TDBAH(0), 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(E1000_TDLEN(0), 0x000FFF80, 0x000FFFFF);
REG_SET_AND_CHECK(E1000_RCTL, 0xFFFFFFFF, 0x00000000);
REG_SET_AND_CHECK(E1000_TCTL, 0xFFFFFFFF, 0x00000000);
REG_SET_AND_CHECK(E1000_RCTL, before, 0xFFFFFFFF);
- REG_PATTERN_TEST(E1000_RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
+ REG_PATTERN_TEST(E1000_RDBAL(0), 0xFFFFFFF0, 0xFFFFFFFF);
if (!(adapter->flags & FLAG_IS_ICH))
REG_PATTERN_TEST(E1000_TXCW, 0xC000FFFF, 0x0000FFFF);
- REG_PATTERN_TEST(E1000_TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
+ REG_PATTERN_TEST(E1000_TDBAL(0), 0xFFFFFFF0, 0xFFFFFFFF);
REG_PATTERN_TEST(E1000_TIDV, 0x0000FFFF, 0x0000FFFF);
mask = 0x8003FFFF;
switch (mac->type) {
case e1000_ich10lan:
case e1000_pchlan:
case e1000_pch2lan:
+ case e1000_pch_lpt:
mask |= (1 << 18);
break;
default:
break;
}
- for (i = 0; i < mac->rar_entry_count; i++)
+
+ if (mac->type == e1000_pch_lpt)
+ wlock_mac = (er32(FWSM) & E1000_FWSM_WLOCK_MAC_MASK) >>
+ E1000_FWSM_WLOCK_MAC_SHIFT;
+
+ for (i = 0; i < mac->rar_entry_count; i++) {
+ /* Cannot test write-protected SHRAL[n] registers */
+ if ((wlock_mac == 1) || (wlock_mac && (i > wlock_mac)))
+ continue;
+
REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1),
- mask, 0xFFFFFFFF);
+ mask, 0xFFFFFFFF);
+ }
for (i = 0; i < mac->mta_reg_count; i++)
REG_PATTERN_TEST_ARRAY(E1000_MTA, i, 0xFFFFFFFF, 0xFFFFFFFF);
*data = 0;
+
return 0;
}
}
/* If Checksum is not Correct return error else test passed */
- if ((checksum != (u16) NVM_SUM) && !(*data))
+ if ((checksum != (u16)NVM_SUM) && !(*data))
*data = 2;
return *data;
static irqreturn_t e1000_test_intr(int irq, void *data)
{
- struct net_device *netdev = (struct net_device *) data;
+ struct net_device *netdev = (struct net_device *)data;
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
netdev)) {
shared_int = 0;
} else if (request_irq(irq, e1000_test_intr, IRQF_SHARED,
- netdev->name, netdev)) {
+ netdev->name, netdev)) {
*data = 1;
ret_val = -1;
goto out;
if (tx_ring->desc && tx_ring->buffer_info) {
for (i = 0; i < tx_ring->count; i++) {
if (tx_ring->buffer_info[i].dma)
- dma_unmap_single(&pdev->dev,
- tx_ring->buffer_info[i].dma,
- tx_ring->buffer_info[i].length,
- DMA_TO_DEVICE);
+ dma_unmap_single(pci_dev_to_dev(pdev),
+ tx_ring->buffer_info[i].dma,
+ tx_ring->buffer_info[i].length,
+ DMA_TO_DEVICE);
if (tx_ring->buffer_info[i].skb)
dev_kfree_skb(tx_ring->buffer_info[i].skb);
}
if (rx_ring->desc && rx_ring->buffer_info) {
for (i = 0; i < rx_ring->count; i++) {
if (rx_ring->buffer_info[i].dma)
- dma_unmap_single(&pdev->dev,
- rx_ring->buffer_info[i].dma,
- 2048, DMA_FROM_DEVICE);
+ dma_unmap_single(pci_dev_to_dev(pdev),
+ rx_ring->buffer_info[i].dma,
+ 2048, DMA_FROM_DEVICE);
if (rx_ring->buffer_info[i].skb)
dev_kfree_skb(rx_ring->buffer_info[i].skb);
}
}
if (tx_ring->desc) {
- dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
- tx_ring->dma);
+ dma_free_coherent(pci_dev_to_dev(pdev), tx_ring->size,
+ tx_ring->desc, tx_ring->dma);
tx_ring->desc = NULL;
}
if (rx_ring->desc) {
- dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
- rx_ring->dma);
+ dma_free_coherent(pci_dev_to_dev(pdev), rx_ring->size,
+ rx_ring->desc, rx_ring->dma);
rx_ring->desc = NULL;
}
tx_ring->count = E1000_DEFAULT_TXD;
tx_ring->buffer_info = kcalloc(tx_ring->count,
- sizeof(struct e1000_buffer),
- GFP_KERNEL);
+ sizeof(struct e1000_buffer), GFP_KERNEL);
if (!tx_ring->buffer_info) {
ret_val = 1;
goto err_nomem;
tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
tx_ring->size = ALIGN(tx_ring->size, 4096);
- tx_ring->desc = dma_alloc_coherent(&pdev->dev, tx_ring->size,
+ tx_ring->desc = dma_alloc_coherent(pci_dev_to_dev(pdev), tx_ring->size,
&tx_ring->dma, GFP_KERNEL);
if (!tx_ring->desc) {
ret_val = 2;
tx_ring->next_to_use = 0;
tx_ring->next_to_clean = 0;
- ew32(TDBAL, ((u64) tx_ring->dma & 0x00000000FFFFFFFF));
- ew32(TDBAH, ((u64) tx_ring->dma >> 32));
- ew32(TDLEN, tx_ring->count * sizeof(struct e1000_tx_desc));
- ew32(TDH, 0);
- ew32(TDT, 0);
+ ew32(TDBAL(0), ((u64)tx_ring->dma & 0x00000000FFFFFFFF));
+ ew32(TDBAH(0), ((u64)tx_ring->dma >> 32));
+ ew32(TDLEN(0), tx_ring->count * sizeof(struct e1000_tx_desc));
+ ew32(TDH(0), 0);
+ ew32(TDT(0), 0);
ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN | E1000_TCTL_MULR |
E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT);
tx_ring->buffer_info[i].skb = skb;
tx_ring->buffer_info[i].length = skb->len;
tx_ring->buffer_info[i].dma =
- dma_map_single(&pdev->dev, skb->data, skb->len,
- DMA_TO_DEVICE);
- if (dma_mapping_error(&pdev->dev,
+ dma_map_single(pci_dev_to_dev(pdev), skb->data, skb->len,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(pci_dev_to_dev(pdev),
tx_ring->buffer_info[i].dma)) {
ret_val = 4;
goto err_nomem;
rx_ring->count = E1000_DEFAULT_RXD;
rx_ring->buffer_info = kcalloc(rx_ring->count,
- sizeof(struct e1000_buffer),
- GFP_KERNEL);
+ sizeof(struct e1000_buffer), GFP_KERNEL);
if (!rx_ring->buffer_info) {
ret_val = 5;
goto err_nomem;
}
rx_ring->size = rx_ring->count * sizeof(union e1000_rx_desc_extended);
- rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size,
+ rx_ring->desc = dma_alloc_coherent(pci_dev_to_dev(pdev), rx_ring->size,
&rx_ring->dma, GFP_KERNEL);
if (!rx_ring->desc) {
ret_val = 6;
rctl = er32(RCTL);
if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
ew32(RCTL, rctl & ~E1000_RCTL_EN);
- ew32(RDBAL, ((u64) rx_ring->dma & 0xFFFFFFFF));
- ew32(RDBAH, ((u64) rx_ring->dma >> 32));
- ew32(RDLEN, rx_ring->size);
- ew32(RDH, 0);
- ew32(RDT, 0);
+ ew32(RDBAL(0), ((u64)rx_ring->dma & 0xFFFFFFFF));
+ ew32(RDBAH(0), ((u64)rx_ring->dma >> 32));
+ ew32(RDLEN(0), rx_ring->size);
+ ew32(RDH(0), 0);
+ ew32(RDT(0), 0);
rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
- E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_LPE |
- E1000_RCTL_SBP | E1000_RCTL_SECRC |
- E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
- (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
+ E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_LPE |
+ E1000_RCTL_SBP | E1000_RCTL_SECRC |
+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+ (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
ew32(RCTL, rctl);
for (i = 0; i < rx_ring->count; i++) {
skb_reserve(skb, NET_IP_ALIGN);
rx_ring->buffer_info[i].skb = skb;
rx_ring->buffer_info[i].dma =
- dma_map_single(&pdev->dev, skb->data, 2048,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(&pdev->dev,
+ dma_map_single(pci_dev_to_dev(pdev), skb->data, 2048,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(pci_dev_to_dev(pdev),
rx_ring->buffer_info[i].dma)) {
ret_val = 8;
goto err_nomem;
/* Now set up the MAC to the same speed/duplex as the PHY. */
ctrl_reg = er32(CTRL);
- ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
- ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
- E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
- E1000_CTRL_SPD_100 |/* Force Speed to 100 */
- E1000_CTRL_FD); /* Force Duplex to FULL */
+ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_100 | /* Force Speed to 100 */
+ E1000_CTRL_FD); /* Force Duplex to FULL */
ew32(CTRL, ctrl_reg);
e1e_flush();
e1e_rphy(hw, PHY_REG(776, 18), &phy_reg);
e1e_wphy(hw, PHY_REG(776, 18), phy_reg | 1);
/* Enable loopback on the PHY */
-#define I82577_PHY_LBK_CTRL 19
e1e_wphy(hw, I82577_PHY_LBK_CTRL, 0x8001);
break;
default:
/* Now set up the MAC to the same speed/duplex as the PHY. */
ctrl_reg = er32(CTRL);
- ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
- ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
- E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
- E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
- E1000_CTRL_FD); /* Force Duplex to FULL */
+ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_1000 | /* Force Speed to 1000 */
+ E1000_CTRL_FD); /* Force Duplex to FULL */
if (adapter->flags & FLAG_IS_ICH)
ctrl_reg |= E1000_CTRL_SLU; /* Set Link Up */
if (hw->phy.media_type == e1000_media_type_copper &&
hw->phy.type == e1000_phy_m88) {
- ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
+ ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
} else {
/*
* Set the ILOS bit on the fiber Nic if half duplex link is
frame_size &= ~1;
if (*(skb->data + 3) == 0xFF)
if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
- (*(skb->data + frame_size / 2 + 12) == 0xAF))
+ (*(skb->data + frame_size / 2 + 12) == 0xAF))
return 0;
return 13;
}
int ret_val = 0;
unsigned long time;
- ew32(RDT, rx_ring->count - 1);
+ ew32(RDT(0), rx_ring->count - 1);
/*
* Calculate the loop count based on the largest descriptor ring
k = 0;
l = 0;
- for (j = 0; j <= lc; j++) { /* loop count loop */
- for (i = 0; i < 64; i++) { /* send the packets */
+ for (j = 0; j <= lc; j++) { /* loop count loop */
+ for (i = 0; i < 64; i++) { /* send the packets */
e1000_create_lbtest_frame(tx_ring->buffer_info[k].skb,
1024);
- dma_sync_single_for_device(&pdev->dev,
- tx_ring->buffer_info[k].dma,
- tx_ring->buffer_info[k].length,
- DMA_TO_DEVICE);
+ dma_sync_single_for_device(pci_dev_to_dev(pdev),
+ tx_ring->buffer_info[k].dma,
+ tx_ring->buffer_info[k].
+ length, DMA_TO_DEVICE);
k++;
if (k == tx_ring->count)
k = 0;
}
- ew32(TDT, k);
+ ew32(TDT(0), k);
e1e_flush();
msleep(200);
- time = jiffies; /* set the start time for the receive */
+ time = jiffies; /* set the start time for the receive */
good_cnt = 0;
- do { /* receive the sent packets */
- dma_sync_single_for_cpu(&pdev->dev,
- rx_ring->buffer_info[l].dma, 2048,
- DMA_FROM_DEVICE);
-
- ret_val = e1000_check_lbtest_frame(
- rx_ring->buffer_info[l].skb, 1024);
+ do { /* receive the sent packets */
+ dma_sync_single_for_cpu(pci_dev_to_dev(pdev),
+ rx_ring->buffer_info[l].dma,
+ 2048, DMA_FROM_DEVICE);
+
+ ret_val =
+ e1000_check_lbtest_frame(rx_ring->buffer_info[l].
+ skb, 1024);
if (!ret_val)
good_cnt++;
l++;
*/
} while ((good_cnt < 64) && !time_after(jiffies, time + 20));
if (good_cnt != 64) {
- ret_val = 13; /* ret_val is the same as mis-compare */
+ ret_val = 13; /* ret_val is the same as mis-compare */
break;
}
if (jiffies >= (time + 20)) {
- ret_val = 14; /* error code for time out error */
+ ret_val = 14; /* error code for time out error */
break;
}
- } /* end loop count loop */
+ } /* end loop count loop */
return ret_val;
}
static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
{
+ struct e1000_hw *hw = &adapter->hw;
+
/*
* PHY loopback cannot be performed if SoL/IDER
* sessions are active
*/
- if (e1000_check_reset_block(&adapter->hw)) {
+ if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw)) {
e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
*data = 0;
goto out;
return *data;
}
+#ifdef HAVE_ETHTOOL_GET_SSET_COUNT
static int e1000e_get_sset_count(struct net_device *netdev, int sset)
{
switch (sset) {
return -EOPNOTSUPP;
}
}
+#else
+static int e1000_get_self_test_count(struct net_device *netdev)
+{
+ return E1000_TEST_LEN;
+}
+
+static int e1000_get_stats_count(struct net_device *netdev)
+{
+ return E1000_STATS_LEN;
+}
+#endif
static void e1000_diag_test(struct net_device *netdev,
struct ethtool_test *eth_test, u64 *data)
wol->supported &= ~WAKE_UCAST;
if (adapter->wol & E1000_WUFC_EX)
- e_err("Interface does not support directed (unicast) "
- "frame wake-up packets\n");
+ e_err("Interface does not support directed (unicast) frame wake-up packets\n");
}
if (adapter->wol & E1000_WUFC_EX)
return 0;
}
+#ifdef HAVE_ETHTOOL_SET_PHYS_ID
static int e1000_set_phys_id(struct net_device *netdev,
enum ethtool_phys_id_state state)
{
}
return 0;
}
+#else /* HAVE_ETHTOOL_SET_PHYS_ID */
+/* toggle LED 4 times per second = 2 "blinks" per second */
+#define E1000_ID_INTERVAL (HZ/4)
+
+/* bit defines for adapter->led_status */
+#define E1000_LED_ON 0
+
+void e1000e_led_blink_task(struct work_struct *work)
+{
+ struct e1000_adapter *adapter = container_of(work,
+ struct e1000_adapter,
+ led_blink_task);
+
+ if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
+ adapter->hw.mac.ops.led_off(&adapter->hw);
+ else
+ adapter->hw.mac.ops.led_on(&adapter->hw);
+}
+
+static void e1000_led_blink_callback(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *)data;
+
+ schedule_work(&adapter->led_blink_task);
+ mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
+}
+
+static int e1000_phys_id(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (!data)
+ data = INT_MAX;
+
+ if ((hw->phy.type == e1000_phy_ife) ||
+ (hw->mac.type == e1000_pchlan) ||
+ (hw->mac.type == e1000_pch2lan) ||
+ (hw->mac.type == e1000_pch_lpt) ||
+ (hw->mac.type == e1000_82583) || (hw->mac.type == e1000_82574)) {
+ if (!adapter->blink_timer.function) {
+ init_timer(&adapter->blink_timer);
+ adapter->blink_timer.function =
+ e1000_led_blink_callback;
+ adapter->blink_timer.data = (unsigned long)adapter;
+ }
+ mod_timer(&adapter->blink_timer, jiffies);
+ msleep_interruptible(data * 1000);
+ del_timer_sync(&adapter->blink_timer);
+ if (hw->phy.type == e1000_phy_ife)
+ e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
+ } else {
+ e1000e_blink_led_generic(hw);
+ msleep_interruptible(data * 1000);
+ }
+
+ hw->mac.ops.led_off(hw);
+ clear_bit(E1000_LED_ON, &adapter->led_status);
+ hw->mac.ops.cleanup_led(hw);
+
+ return 0;
+}
+#endif /* HAVE_ETHTOOL_SET_PHYS_ID */
static int e1000_get_coalesce(struct net_device *netdev,
struct ethtool_coalesce *ec)
}
static void e1000_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats,
- u64 *data)
+ struct ethtool_stats *stats, u64 *data)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
+#ifdef HAVE_NDO_GET_STATS64
struct rtnl_link_stats64 net_stats;
+#endif
int i;
char *p = NULL;
+#ifdef HAVE_NDO_GET_STATS64
e1000e_get_stats64(netdev, &net_stats);
+#else
+ e1000e_update_stats(adapter);
+#endif
for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
switch (e1000_gstrings_stats[i].type) {
case NETDEV_STATS:
- p = (char *) &net_stats +
- e1000_gstrings_stats[i].stat_offset;
+#ifdef HAVE_NDO_GET_STATS64
+ p = (char *)&net_stats +
+#else
+ p = (char *)netdev +
+#endif
+ e1000_gstrings_stats[i].stat_offset;
break;
case E1000_STATS:
- p = (char *) adapter +
- e1000_gstrings_stats[i].stat_offset;
+ p = (char *)adapter +
+ e1000_gstrings_stats[i].stat_offset;
break;
default:
data[i] = 0;
}
data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
- sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
}
}
}
}
+#ifdef ETHTOOL_GRXRINGS
+#ifdef HAVE_ETHTOOL_GET_RXNFC_VOID_RULE_LOCS
static int e1000_get_rxnfc(struct net_device *netdev,
struct ethtool_rxnfc *info, void *rule_locs)
+#else
+static int e1000_get_rxnfc(struct net_device *netdev,
+ struct ethtool_rxnfc *info, u32 *rule_locs)
+#endif
{
info->data = 0;
switch (info->cmd) {
+/* *INDENT-OFF* */
case ETHTOOL_GRXFH: {
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
}
return 0;
}
+/* *INDENT-ON* */
default:
return -EOPNOTSUPP;
}
}
+#endif /* ETHTOOL_GRXRINGS */
static const struct ethtool_ops e1000_ethtool_ops = {
- .get_settings = e1000_get_settings,
- .set_settings = e1000_set_settings,
- .get_drvinfo = e1000_get_drvinfo,
- .get_regs_len = e1000_get_regs_len,
- .get_regs = e1000_get_regs,
- .get_wol = e1000_get_wol,
- .set_wol = e1000_set_wol,
- .get_msglevel = e1000_get_msglevel,
- .set_msglevel = e1000_set_msglevel,
- .nway_reset = e1000_nway_reset,
- .get_link = ethtool_op_get_link,
- .get_eeprom_len = e1000_get_eeprom_len,
- .get_eeprom = e1000_get_eeprom,
- .set_eeprom = e1000_set_eeprom,
- .get_ringparam = e1000_get_ringparam,
- .set_ringparam = e1000_set_ringparam,
- .get_pauseparam = e1000_get_pauseparam,
- .set_pauseparam = e1000_set_pauseparam,
- .self_test = e1000_diag_test,
- .get_strings = e1000_get_strings,
- .set_phys_id = e1000_set_phys_id,
- .get_ethtool_stats = e1000_get_ethtool_stats,
- .get_sset_count = e1000e_get_sset_count,
- .get_coalesce = e1000_get_coalesce,
- .set_coalesce = e1000_set_coalesce,
- .get_rxnfc = e1000_get_rxnfc,
+ .get_settings = e1000_get_settings,
+ .set_settings = e1000_set_settings,
+ .get_drvinfo = e1000_get_drvinfo,
+ .get_regs_len = e1000_get_regs_len,
+ .get_regs = e1000_get_regs,
+ .get_wol = e1000_get_wol,
+ .set_wol = e1000_set_wol,
+ .get_msglevel = e1000_get_msglevel,
+ .set_msglevel = e1000_set_msglevel,
+ .nway_reset = e1000_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .get_eeprom_len = e1000_get_eeprom_len,
+ .get_eeprom = e1000_get_eeprom,
+ .set_eeprom = e1000_set_eeprom,
+ .get_ringparam = e1000_get_ringparam,
+ .set_ringparam = e1000_set_ringparam,
+ .get_pauseparam = e1000_get_pauseparam,
+ .set_pauseparam = e1000_set_pauseparam,
+#ifndef HAVE_NDO_SET_FEATURES
+ .get_rx_csum = e1000_get_rx_csum,
+ .set_rx_csum = e1000_set_rx_csum,
+ .get_tx_csum = e1000_get_tx_csum,
+ .set_tx_csum = e1000_set_tx_csum,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+#ifdef NETIF_F_TSO
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = e1000_set_tso,
+#endif
+#ifdef ETHTOOL_GFLAGS
+ .get_flags = ethtool_op_get_flags,
+#endif
+#if defined(ETHTOOL_SFLAGS) && (defined(NETIF_F_RXHASH) || !defined(HAVE_VLAN_RX_REGISTER))
+ .set_flags = e1000e_set_flags,
+#endif
+#endif /* HAVE_NDO_SET_FEATURES */
+ .self_test = e1000_diag_test,
+ .get_strings = e1000_get_strings,
+#ifdef HAVE_ETHTOOL_SET_PHYS_ID
+ .set_phys_id = e1000_set_phys_id,
+#else
+ .phys_id = e1000_phys_id,
+#endif
+ .get_ethtool_stats = e1000_get_ethtool_stats,
+#ifdef HAVE_ETHTOOL_GET_SSET_COUNT
+ .get_sset_count = e1000e_get_sset_count,
+#else
+ .self_test_count = e1000_get_self_test_count,
+ .get_stats_count = e1000_get_stats_count,
+#endif
+#ifdef HAVE_ETHTOOL_GET_PERM_ADDR
+ .get_perm_addr = ethtool_op_get_perm_addr,
+#endif
+ .get_coalesce = e1000_get_coalesce,
+ .set_coalesce = e1000_set_coalesce,
+#ifdef ETHTOOL_GRXRINGS
+ .get_rxnfc = e1000_get_rxnfc,
+#endif
};
void e1000e_set_ethtool_ops(struct net_device *netdev)
{
- SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops);
+ /* have to "undeclare" const on this struct to remove warnings */
+ SET_ETHTOOL_OPS(netdev, (struct ethtool_ops *)&e1000_ethtool_ops);
}
+#endif /* SIOCETHTOOL */
#ifndef _E1000_HW_H_
#define _E1000_HW_H_
-#include <linux/types.h>
-
-struct e1000_hw;
-struct e1000_adapter;
-
+#include "regs.h"
#include "defines.h"
-#define er32(reg) __er32(hw, E1000_##reg)
-#define ew32(reg,val) __ew32(hw, E1000_##reg, (val))
-#define e1e_flush() er32(STATUS)
-
-#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) \
- (writel((value), ((a)->hw_addr + reg + ((offset) << 2))))
-
-#define E1000_READ_REG_ARRAY(a, reg, offset) \
- (readl((a)->hw_addr + reg + ((offset) << 2)))
-
-enum e1e_registers {
- E1000_CTRL = 0x00000, /* Device Control - RW */
- E1000_STATUS = 0x00008, /* Device Status - RO */
- E1000_EECD = 0x00010, /* EEPROM/Flash Control - RW */
- E1000_EERD = 0x00014, /* EEPROM Read - RW */
- E1000_CTRL_EXT = 0x00018, /* Extended Device Control - RW */
- E1000_FLA = 0x0001C, /* Flash Access - RW */
- E1000_MDIC = 0x00020, /* MDI Control - RW */
- E1000_SCTL = 0x00024, /* SerDes Control - RW */
- E1000_FCAL = 0x00028, /* Flow Control Address Low - RW */
- E1000_FCAH = 0x0002C, /* Flow Control Address High -RW */
- E1000_FEXTNVM4 = 0x00024, /* Future Extended NVM 4 - RW */
- E1000_FEXTNVM = 0x00028, /* Future Extended NVM - RW */
- E1000_FCT = 0x00030, /* Flow Control Type - RW */
- E1000_VET = 0x00038, /* VLAN Ether Type - RW */
- E1000_ICR = 0x000C0, /* Interrupt Cause Read - R/clr */
- E1000_ITR = 0x000C4, /* Interrupt Throttling Rate - RW */
- E1000_ICS = 0x000C8, /* Interrupt Cause Set - WO */
- E1000_IMS = 0x000D0, /* Interrupt Mask Set - RW */
- E1000_IMC = 0x000D8, /* Interrupt Mask Clear - WO */
- E1000_EIAC_82574 = 0x000DC, /* Ext. Interrupt Auto Clear - RW */
- E1000_IAM = 0x000E0, /* Interrupt Acknowledge Auto Mask */
- E1000_IVAR = 0x000E4, /* Interrupt Vector Allocation - RW */
- E1000_EITR_82574_BASE = 0x000E8, /* Interrupt Throttling - RW */
-#define E1000_EITR_82574(_n) (E1000_EITR_82574_BASE + (_n << 2))
- E1000_RCTL = 0x00100, /* Rx Control - RW */
- E1000_FCTTV = 0x00170, /* Flow Control Transmit Timer Value - RW */
- E1000_TXCW = 0x00178, /* Tx Configuration Word - RW */
- E1000_RXCW = 0x00180, /* Rx Configuration Word - RO */
- E1000_TCTL = 0x00400, /* Tx Control - RW */
- E1000_TCTL_EXT = 0x00404, /* Extended Tx Control - RW */
- E1000_TIPG = 0x00410, /* Tx Inter-packet gap -RW */
- E1000_AIT = 0x00458, /* Adaptive Interframe Spacing Throttle -RW */
- E1000_LEDCTL = 0x00E00, /* LED Control - RW */
- E1000_EXTCNF_CTRL = 0x00F00, /* Extended Configuration Control */
- E1000_EXTCNF_SIZE = 0x00F08, /* Extended Configuration Size */
- E1000_PHY_CTRL = 0x00F10, /* PHY Control Register in CSR */
-#define E1000_POEMB E1000_PHY_CTRL /* PHY OEM Bits */
- E1000_PBA = 0x01000, /* Packet Buffer Allocation - RW */
- E1000_PBS = 0x01008, /* Packet Buffer Size */
- E1000_EEMNGCTL = 0x01010, /* MNG EEprom Control */
- E1000_EEWR = 0x0102C, /* EEPROM Write Register - RW */
- E1000_FLOP = 0x0103C, /* FLASH Opcode Register */
- E1000_PBA_ECC = 0x01100, /* PBA ECC Register */
- E1000_ERT = 0x02008, /* Early Rx Threshold - RW */
- E1000_FCRTL = 0x02160, /* Flow Control Receive Threshold Low - RW */
- E1000_FCRTH = 0x02168, /* Flow Control Receive Threshold High - RW */
- E1000_PSRCTL = 0x02170, /* Packet Split Receive Control - RW */
- E1000_RDBAL = 0x02800, /* Rx Descriptor Base Address Low - RW */
- E1000_RDBAH = 0x02804, /* Rx Descriptor Base Address High - RW */
- E1000_RDLEN = 0x02808, /* Rx Descriptor Length - RW */
- E1000_RDH = 0x02810, /* Rx Descriptor Head - RW */
- E1000_RDT = 0x02818, /* Rx Descriptor Tail - RW */
- E1000_RDTR = 0x02820, /* Rx Delay Timer - RW */
- E1000_RXDCTL_BASE = 0x02828, /* Rx Descriptor Control - RW */
-#define E1000_RXDCTL(_n) (E1000_RXDCTL_BASE + (_n << 8))
- E1000_RADV = 0x0282C, /* Rx Interrupt Absolute Delay Timer - RW */
-
-/* Convenience macros
- *
- * Note: "_n" is the queue number of the register to be written to.
- *
- * Example usage:
- * E1000_RDBAL_REG(current_rx_queue)
- *
- */
-#define E1000_RDBAL_REG(_n) (E1000_RDBAL + (_n << 8))
- E1000_KABGTXD = 0x03004, /* AFE Band Gap Transmit Ref Data */
- E1000_TDBAL = 0x03800, /* Tx Descriptor Base Address Low - RW */
- E1000_TDBAH = 0x03804, /* Tx Descriptor Base Address High - RW */
- E1000_TDLEN = 0x03808, /* Tx Descriptor Length - RW */
- E1000_TDH = 0x03810, /* Tx Descriptor Head - RW */
- E1000_TDT = 0x03818, /* Tx Descriptor Tail - RW */
- E1000_TIDV = 0x03820, /* Tx Interrupt Delay Value - RW */
- E1000_TXDCTL_BASE = 0x03828, /* Tx Descriptor Control - RW */
-#define E1000_TXDCTL(_n) (E1000_TXDCTL_BASE + (_n << 8))
- E1000_TADV = 0x0382C, /* Tx Interrupt Absolute Delay Val - RW */
- E1000_TARC_BASE = 0x03840, /* Tx Arbitration Count (0) */
-#define E1000_TARC(_n) (E1000_TARC_BASE + (_n << 8))
- E1000_CRCERRS = 0x04000, /* CRC Error Count - R/clr */
- E1000_ALGNERRC = 0x04004, /* Alignment Error Count - R/clr */
- E1000_SYMERRS = 0x04008, /* Symbol Error Count - R/clr */
- E1000_RXERRC = 0x0400C, /* Receive Error Count - R/clr */
- E1000_MPC = 0x04010, /* Missed Packet Count - R/clr */
- E1000_SCC = 0x04014, /* Single Collision Count - R/clr */
- E1000_ECOL = 0x04018, /* Excessive Collision Count - R/clr */
- E1000_MCC = 0x0401C, /* Multiple Collision Count - R/clr */
- E1000_LATECOL = 0x04020, /* Late Collision Count - R/clr */
- E1000_COLC = 0x04028, /* Collision Count - R/clr */
- E1000_DC = 0x04030, /* Defer Count - R/clr */
- E1000_TNCRS = 0x04034, /* Tx-No CRS - R/clr */
- E1000_SEC = 0x04038, /* Sequence Error Count - R/clr */
- E1000_CEXTERR = 0x0403C, /* Carrier Extension Error Count - R/clr */
- E1000_RLEC = 0x04040, /* Receive Length Error Count - R/clr */
- E1000_XONRXC = 0x04048, /* XON Rx Count - R/clr */
- E1000_XONTXC = 0x0404C, /* XON Tx Count - R/clr */
- E1000_XOFFRXC = 0x04050, /* XOFF Rx Count - R/clr */
- E1000_XOFFTXC = 0x04054, /* XOFF Tx Count - R/clr */
- E1000_FCRUC = 0x04058, /* Flow Control Rx Unsupported Count- R/clr */
- E1000_PRC64 = 0x0405C, /* Packets Rx (64 bytes) - R/clr */
- E1000_PRC127 = 0x04060, /* Packets Rx (65-127 bytes) - R/clr */
- E1000_PRC255 = 0x04064, /* Packets Rx (128-255 bytes) - R/clr */
- E1000_PRC511 = 0x04068, /* Packets Rx (255-511 bytes) - R/clr */
- E1000_PRC1023 = 0x0406C, /* Packets Rx (512-1023 bytes) - R/clr */
- E1000_PRC1522 = 0x04070, /* Packets Rx (1024-1522 bytes) - R/clr */
- E1000_GPRC = 0x04074, /* Good Packets Rx Count - R/clr */
- E1000_BPRC = 0x04078, /* Broadcast Packets Rx Count - R/clr */
- E1000_MPRC = 0x0407C, /* Multicast Packets Rx Count - R/clr */
- E1000_GPTC = 0x04080, /* Good Packets Tx Count - R/clr */
- E1000_GORCL = 0x04088, /* Good Octets Rx Count Low - R/clr */
- E1000_GORCH = 0x0408C, /* Good Octets Rx Count High - R/clr */
- E1000_GOTCL = 0x04090, /* Good Octets Tx Count Low - R/clr */
- E1000_GOTCH = 0x04094, /* Good Octets Tx Count High - R/clr */
- E1000_RNBC = 0x040A0, /* Rx No Buffers Count - R/clr */
- E1000_RUC = 0x040A4, /* Rx Undersize Count - R/clr */
- E1000_RFC = 0x040A8, /* Rx Fragment Count - R/clr */
- E1000_ROC = 0x040AC, /* Rx Oversize Count - R/clr */
- E1000_RJC = 0x040B0, /* Rx Jabber Count - R/clr */
- E1000_MGTPRC = 0x040B4, /* Management Packets Rx Count - R/clr */
- E1000_MGTPDC = 0x040B8, /* Management Packets Dropped Count - R/clr */
- E1000_MGTPTC = 0x040BC, /* Management Packets Tx Count - R/clr */
- E1000_TORL = 0x040C0, /* Total Octets Rx Low - R/clr */
- E1000_TORH = 0x040C4, /* Total Octets Rx High - R/clr */
- E1000_TOTL = 0x040C8, /* Total Octets Tx Low - R/clr */
- E1000_TOTH = 0x040CC, /* Total Octets Tx High - R/clr */
- E1000_TPR = 0x040D0, /* Total Packets Rx - R/clr */
- E1000_TPT = 0x040D4, /* Total Packets Tx - R/clr */
- E1000_PTC64 = 0x040D8, /* Packets Tx (64 bytes) - R/clr */
- E1000_PTC127 = 0x040DC, /* Packets Tx (65-127 bytes) - R/clr */
- E1000_PTC255 = 0x040E0, /* Packets Tx (128-255 bytes) - R/clr */
- E1000_PTC511 = 0x040E4, /* Packets Tx (256-511 bytes) - R/clr */
- E1000_PTC1023 = 0x040E8, /* Packets Tx (512-1023 bytes) - R/clr */
- E1000_PTC1522 = 0x040EC, /* Packets Tx (1024-1522 Bytes) - R/clr */
- E1000_MPTC = 0x040F0, /* Multicast Packets Tx Count - R/clr */
- E1000_BPTC = 0x040F4, /* Broadcast Packets Tx Count - R/clr */
- E1000_TSCTC = 0x040F8, /* TCP Segmentation Context Tx - R/clr */
- E1000_TSCTFC = 0x040FC, /* TCP Segmentation Context Tx Fail - R/clr */
- E1000_IAC = 0x04100, /* Interrupt Assertion Count */
- E1000_ICRXPTC = 0x04104, /* Irq Cause Rx Packet Timer Expire Count */
- E1000_ICRXATC = 0x04108, /* Irq Cause Rx Abs Timer Expire Count */
- E1000_ICTXPTC = 0x0410C, /* Irq Cause Tx Packet Timer Expire Count */
- E1000_ICTXATC = 0x04110, /* Irq Cause Tx Abs Timer Expire Count */
- E1000_ICTXQEC = 0x04118, /* Irq Cause Tx Queue Empty Count */
- E1000_ICTXQMTC = 0x0411C, /* Irq Cause Tx Queue MinThreshold Count */
- E1000_ICRXDMTC = 0x04120, /* Irq Cause Rx Desc MinThreshold Count */
- E1000_ICRXOC = 0x04124, /* Irq Cause Receiver Overrun Count */
- E1000_RXCSUM = 0x05000, /* Rx Checksum Control - RW */
- E1000_RFCTL = 0x05008, /* Receive Filter Control */
- E1000_MTA = 0x05200, /* Multicast Table Array - RW Array */
- E1000_RAL_BASE = 0x05400, /* Receive Address Low - RW */
-#define E1000_RAL(_n) (E1000_RAL_BASE + ((_n) * 8))
-#define E1000_RA (E1000_RAL(0))
- E1000_RAH_BASE = 0x05404, /* Receive Address High - RW */
-#define E1000_RAH(_n) (E1000_RAH_BASE + ((_n) * 8))
- E1000_VFTA = 0x05600, /* VLAN Filter Table Array - RW Array */
- E1000_WUC = 0x05800, /* Wakeup Control - RW */
- E1000_WUFC = 0x05808, /* Wakeup Filter Control - RW */
- E1000_WUS = 0x05810, /* Wakeup Status - RO */
- E1000_MRQC = 0x05818, /* Multiple Receive Control - RW */
- E1000_MANC = 0x05820, /* Management Control - RW */
- E1000_FFLT = 0x05F00, /* Flexible Filter Length Table - RW Array */
- E1000_HOST_IF = 0x08800, /* Host Interface */
-
- E1000_KMRNCTRLSTA = 0x00034, /* MAC-PHY interface - RW */
- E1000_MANC2H = 0x05860, /* Management Control To Host - RW */
- E1000_MDEF_BASE = 0x05890, /* Management Decision Filters */
-#define E1000_MDEF(_n) (E1000_MDEF_BASE + ((_n) * 4))
- E1000_SW_FW_SYNC = 0x05B5C, /* Software-Firmware Synchronization - RW */
- E1000_GCR = 0x05B00, /* PCI-Ex Control */
- E1000_GCR2 = 0x05B64, /* PCI-Ex Control #2 */
- E1000_FACTPS = 0x05B30, /* Function Active and Power State to MNG */
- E1000_SWSM = 0x05B50, /* SW Semaphore */
- E1000_FWSM = 0x05B54, /* FW Semaphore */
- E1000_SWSM2 = 0x05B58, /* Driver-only SW semaphore */
- E1000_RETA_BASE = 0x05C00, /* Redirection Table - RW */
-#define E1000_RETA(_n) (E1000_RETA_BASE + ((_n) * 4))
- E1000_RSSRK_BASE = 0x05C80, /* RSS Random Key - RW */
-#define E1000_RSSRK(_n) (E1000_RSSRK_BASE + ((_n) * 4))
- E1000_FFLT_DBG = 0x05F04, /* Debug Register */
- E1000_PCH_RAICC_BASE = 0x05F50, /* Receive Address Initial CRC */
-#define E1000_PCH_RAICC(_n) (E1000_PCH_RAICC_BASE + ((_n) * 4))
-#define E1000_CRC_OFFSET E1000_PCH_RAICC_BASE
- E1000_HICR = 0x08F00, /* Host Interface Control */
-};
-
-#define E1000_MAX_PHY_ADDR 4
-
-/* IGP01E1000 Specific Registers */
-#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */
-#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */
-#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */
-#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */
-#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */
-#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */
-#define BM_PHY_PAGE_SELECT 22 /* Page Select for BM */
-#define IGP_PAGE_SHIFT 5
-#define PHY_REG_MASK 0x1F
-
-#define BM_WUC_PAGE 800
-#define BM_WUC_ADDRESS_OPCODE 0x11
-#define BM_WUC_DATA_OPCODE 0x12
-#define BM_WUC_ENABLE_PAGE 769
-#define BM_WUC_ENABLE_REG 17
-#define BM_WUC_ENABLE_BIT (1 << 2)
-#define BM_WUC_HOST_WU_BIT (1 << 4)
-#define BM_WUC_ME_WU_BIT (1 << 5)
-
-#define BM_WUC PHY_REG(BM_WUC_PAGE, 1)
-#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2)
-#define BM_WUS PHY_REG(BM_WUC_PAGE, 3)
-
-#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
-#define IGP01E1000_PHY_POLARITY_MASK 0x0078
-
-#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
-#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */
-
-#define IGP01E1000_PSCFR_SMART_SPEED 0x0080
-
-#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */
-#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */
-#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */
-
-#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
-
-#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
-#define IGP01E1000_PSSR_MDIX 0x0800
-#define IGP01E1000_PSSR_SPEED_MASK 0xC000
-#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
-
-#define IGP02E1000_PHY_CHANNEL_NUM 4
-#define IGP02E1000_PHY_AGC_A 0x11B1
-#define IGP02E1000_PHY_AGC_B 0x12B1
-#define IGP02E1000_PHY_AGC_C 0x14B1
-#define IGP02E1000_PHY_AGC_D 0x18B1
-
-#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course - 15:13, Fine - 12:9 */
-#define IGP02E1000_AGC_LENGTH_MASK 0x7F
-#define IGP02E1000_AGC_RANGE 15
-
-/* manage.c */
-#define E1000_VFTA_ENTRY_SHIFT 5
-#define E1000_VFTA_ENTRY_MASK 0x7F
-#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F
-
-#define E1000_HICR_EN 0x01 /* Enable bit - RO */
-/* Driver sets this bit when done to put command in RAM */
-#define E1000_HICR_C 0x02
-#define E1000_HICR_FW_RESET_ENABLE 0x40
-#define E1000_HICR_FW_RESET 0x80
-
-#define E1000_FWSM_MODE_MASK 0xE
-#define E1000_FWSM_MODE_SHIFT 1
-
-#define E1000_MNG_IAMT_MODE 0x3
-#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10
-#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0
-#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10
-#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64
-#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING 0x1
-#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2
-
-/* nvm.c */
-#define E1000_STM_OPCODE 0xDB00
-
-#define E1000_KMRNCTRLSTA_OFFSET 0x001F0000
-#define E1000_KMRNCTRLSTA_OFFSET_SHIFT 16
-#define E1000_KMRNCTRLSTA_REN 0x00200000
-#define E1000_KMRNCTRLSTA_CTRL_OFFSET 0x1 /* Kumeran Control */
-#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */
-#define E1000_KMRNCTRLSTA_TIMEOUTS 0x4 /* Kumeran Timeouts */
-#define E1000_KMRNCTRLSTA_INBAND_PARAM 0x9 /* Kumeran InBand Parameters */
-#define E1000_KMRNCTRLSTA_IBIST_DISABLE 0x0200 /* Kumeran IBIST Disable */
-#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */
-#define E1000_KMRNCTRLSTA_K1_CONFIG 0x7
-#define E1000_KMRNCTRLSTA_K1_ENABLE 0x0002
-#define E1000_KMRNCTRLSTA_HD_CTRL 0x10 /* Kumeran HD Control */
-
-#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10
-#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Control */
-#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY Special and LED Control */
-#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control */
-
-/* IFE PHY Extended Status Control */
-#define IFE_PESC_POLARITY_REVERSED 0x0100
-
-/* IFE PHY Special Control */
-#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010
-#define IFE_PSC_FORCE_POLARITY 0x0020
-
-/* IFE PHY Special Control and LED Control */
-#define IFE_PSCL_PROBE_MODE 0x0020
-#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */
-#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */
-
-/* IFE PHY MDIX Control */
-#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */
-#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDI-X, 0=force MDI */
-#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable auto MDI/MDI-X, 0=disable */
-
-#define E1000_CABLE_LENGTH_UNDEFINED 0xFF
+struct e1000_hw;
#define E1000_DEV_ID_82571EB_COPPER 0x105E
#define E1000_DEV_ID_82571EB_FIBER 0x105F
#define E1000_DEV_ID_82571EB_SERDES 0x1060
+#define E1000_DEV_ID_82571EB_SERDES_DUAL 0x10D9
+#define E1000_DEV_ID_82571EB_SERDES_QUAD 0x10DA
#define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4
#define E1000_DEV_ID_82571PT_QUAD_COPPER 0x10D5
#define E1000_DEV_ID_82571EB_QUAD_FIBER 0x10A5
#define E1000_DEV_ID_82571EB_QUAD_COPPER_LP 0x10BC
-#define E1000_DEV_ID_82571EB_SERDES_DUAL 0x10D9
-#define E1000_DEV_ID_82571EB_SERDES_QUAD 0x10DA
#define E1000_DEV_ID_82572EI_COPPER 0x107D
#define E1000_DEV_ID_82572EI_FIBER 0x107E
#define E1000_DEV_ID_82572EI_SERDES 0x107F
#define E1000_DEV_ID_82573L 0x109A
#define E1000_DEV_ID_82574L 0x10D3
#define E1000_DEV_ID_82574LA 0x10F6
-#define E1000_DEV_ID_82583V 0x150C
-
+#define E1000_DEV_ID_82583V 0x150C
#define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096
#define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098
#define E1000_DEV_ID_80003ES2LAN_COPPER_SPT 0x10BA
#define E1000_DEV_ID_80003ES2LAN_SERDES_SPT 0x10BB
-
#define E1000_DEV_ID_ICH8_82567V_3 0x1501
#define E1000_DEV_ID_ICH8_IGP_M_AMT 0x1049
#define E1000_DEV_ID_ICH8_IGP_AMT 0x104A
#define E1000_DEV_ID_ICH8_IFE_GT 0x10C4
#define E1000_DEV_ID_ICH8_IFE_G 0x10C5
#define E1000_DEV_ID_ICH8_IGP_M 0x104D
-#define E1000_DEV_ID_ICH9_IGP_AMT 0x10BD
-#define E1000_DEV_ID_ICH9_BM 0x10E5
-#define E1000_DEV_ID_ICH9_IGP_M_AMT 0x10F5
#define E1000_DEV_ID_ICH9_IGP_M 0x10BF
+#define E1000_DEV_ID_ICH9_IGP_M_AMT 0x10F5
#define E1000_DEV_ID_ICH9_IGP_M_V 0x10CB
+#define E1000_DEV_ID_ICH9_IGP_AMT 0x10BD
+#define E1000_DEV_ID_ICH9_BM 0x10E5
#define E1000_DEV_ID_ICH9_IGP_C 0x294C
#define E1000_DEV_ID_ICH9_IFE 0x10C0
#define E1000_DEV_ID_ICH9_IFE_GT 0x10C3
#define E1000_DEV_ID_ICH10_D_BM_LM 0x10DE
#define E1000_DEV_ID_ICH10_D_BM_LF 0x10DF
#define E1000_DEV_ID_ICH10_D_BM_V 0x1525
+
#define E1000_DEV_ID_PCH_M_HV_LM 0x10EA
#define E1000_DEV_ID_PCH_M_HV_LC 0x10EB
#define E1000_DEV_ID_PCH_D_HV_DM 0x10EF
#define E1000_DEV_ID_PCH_D_HV_DC 0x10F0
#define E1000_DEV_ID_PCH2_LV_LM 0x1502
#define E1000_DEV_ID_PCH2_LV_V 0x1503
+#define E1000_DEV_ID_PCH_LPT_I217_LM 0x153A
+#define E1000_DEV_ID_PCH_LPT_I217_V 0x153B
+#define E1000_REVISION_0 0
+#define E1000_REVISION_1 1
+#define E1000_REVISION_3 3
+#define E1000_REVISION_4 4
-#define E1000_REVISION_4 4
-
-#define E1000_FUNC_1 1
+#define E1000_FUNC_0 0
+#define E1000_FUNC_1 1
-#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0 0
-#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0 0
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3
enum e1000_mac_type {
+ e1000_undefined = 0,
e1000_82571,
e1000_82572,
e1000_82573,
e1000_ich10lan,
e1000_pchlan,
e1000_pch2lan,
+ e1000_pch_lpt,
+ e1000_num_macs /* List is 1-based, so subtract 1 for true count. */
};
enum e1000_media_type {
enum e1000_nvm_override {
e1000_nvm_override_none = 0,
e1000_nvm_override_spi_small,
- e1000_nvm_override_spi_large
+ e1000_nvm_override_spi_large,
};
enum e1000_phy_type {
e1000_phy_82578,
e1000_phy_82577,
e1000_phy_82579,
+ e1000_phy_i217,
+};
+
+enum e1000_bus_type {
+ e1000_bus_type_unknown = 0,
+ e1000_bus_type_pci,
+ e1000_bus_type_pcix,
+ e1000_bus_type_pci_express,
+ e1000_bus_type_reserved
+};
+
+enum e1000_bus_speed {
+ e1000_bus_speed_unknown = 0,
+ e1000_bus_speed_33,
+ e1000_bus_speed_66,
+ e1000_bus_speed_100,
+ e1000_bus_speed_120,
+ e1000_bus_speed_133,
+ e1000_bus_speed_2500,
+ e1000_bus_speed_5000,
+ e1000_bus_speed_reserved
};
enum e1000_bus_width {
e1000_bus_width_pcie_x1,
e1000_bus_width_pcie_x2,
e1000_bus_width_pcie_x4 = 4,
+ e1000_bus_width_pcie_x8 = 8,
e1000_bus_width_32,
e1000_bus_width_64,
e1000_bus_width_reserved
e1000_1000t_rx_status_undefined = 0xFF
};
-enum e1000_rev_polarity{
+enum e1000_rev_polarity {
e1000_rev_polarity_normal = 0,
e1000_rev_polarity_reversed,
e1000_rev_polarity_undefined = 0xFF
e1000_serdes_link_forced_up
};
-/* Receive Descriptor */
-struct e1000_rx_desc {
- __le64 buffer_addr; /* Address of the descriptor's data buffer */
- __le16 length; /* Length of data DMAed into data buffer */
- __le16 csum; /* Packet checksum */
- u8 status; /* Descriptor status */
- u8 errors; /* Descriptor Errors */
- __le16 special;
-};
-
+#ifndef __le16
+#define __le16 u16
+#endif
+#ifndef __le32
+#define __le32 u32
+#endif
+#ifndef __le64
+#define __le64 u64
+#endif
/* Receive Descriptor - Extended */
union e1000_rx_desc_extended {
struct {
} read;
struct {
struct {
- __le32 mrq; /* Multiple Rx Queues */
+ __le32 mrq; /* Multiple Rx Queues */
union {
- __le32 rss; /* RSS Hash */
+ __le32 rss; /* RSS Hash */
struct {
- __le16 ip_id; /* IP id */
- __le16 csum; /* Packet Checksum */
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
} csum_ip;
} hi_dword;
} lower;
struct {
- __le32 status_error; /* ext status/error */
+ __le32 status_error; /* ext status/error */
__le16 length;
- __le16 vlan; /* VLAN tag */
+ __le16 vlan; /* VLAN tag */
} upper;
- } wb; /* writeback */
+ } wb; /* writeback */
};
#define MAX_PS_BUFFERS 4
} read;
struct {
struct {
- __le32 mrq; /* Multiple Rx Queues */
+ __le32 mrq; /* Multiple Rx Queues */
union {
- __le32 rss; /* RSS Hash */
+ __le32 rss; /* RSS Hash */
struct {
- __le16 ip_id; /* IP id */
- __le16 csum; /* Packet Checksum */
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
} csum_ip;
} hi_dword;
} lower;
struct {
- __le32 status_error; /* ext status/error */
- __le16 length0; /* length of buffer 0 */
- __le16 vlan; /* VLAN tag */
+ __le32 status_error; /* ext status/error */
+ __le16 length0; /* length of buffer 0 */
+ __le16 vlan; /* VLAN tag */
} middle;
struct {
__le16 header_status;
__le16 length[3]; /* length of buffers 1-3 */
} upper;
__le64 reserved;
- } wb; /* writeback */
+ } wb; /* writeback */
};
/* Transmit Descriptor */
struct e1000_tx_desc {
- __le64 buffer_addr; /* Address of the descriptor's data buffer */
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
union {
__le32 data;
struct {
- __le16 length; /* Data buffer length */
+ __le16 length; /* Data buffer length */
u8 cso; /* Checksum offset */
u8 cmd; /* Descriptor control */
} flags;
union {
__le32 data;
struct {
- u8 status; /* Descriptor status */
+ u8 status; /* Descriptor status */
u8 css; /* Checksum start */
__le16 special;
} fields;
union {
__le32 ip_config;
struct {
- u8 ipcss; /* IP checksum start */
- u8 ipcso; /* IP checksum offset */
- __le16 ipcse; /* IP checksum end */
+ u8 ipcss; /* IP checksum start */
+ u8 ipcso; /* IP checksum offset */
+ __le16 ipcse; /* IP checksum end */
} ip_fields;
} lower_setup;
union {
__le32 tcp_config;
struct {
- u8 tucss; /* TCP checksum start */
- u8 tucso; /* TCP checksum offset */
- __le16 tucse; /* TCP checksum end */
+ u8 tucss; /* TCP checksum start */
+ u8 tucso; /* TCP checksum offset */
+ __le16 tucse; /* TCP checksum end */
} tcp_fields;
} upper_setup;
__le32 cmd_and_length;
union {
__le32 data;
struct {
- u8 status; /* Descriptor status */
- u8 hdr_len; /* Header length */
- __le16 mss; /* Maximum segment size */
+ u8 status; /* Descriptor status */
+ u8 hdr_len; /* Header length */
+ __le16 mss; /* Maximum segment size */
} fields;
} tcp_seg_setup;
};
/* Offload data descriptor */
struct e1000_data_desc {
- __le64 buffer_addr; /* Address of the descriptor's buffer address */
+ __le64 buffer_addr; /* Address of the descriptor's buffer address */
union {
__le32 data;
struct {
- __le16 length; /* Data buffer length */
+ __le16 length; /* Data buffer length */
u8 typ_len_ext;
u8 cmd;
} flags;
union {
__le32 data;
struct {
- u8 status; /* Descriptor status */
- u8 popts; /* Packet Options */
- __le16 special; /* */
+ u8 status; /* Descriptor status */
+ u8 popts; /* Packet Options */
+ __le16 special;
} fields;
} upper;
};
u64 ictxqmtc;
u64 icrxdmtc;
u64 icrxoc;
+ u64 doosync;
};
struct e1000_phy_stats {
struct e1000_host_mng_dhcp_cookie {
u32 signature;
- u8 status;
- u8 reserved0;
+ u8 status;
+ u8 reserved0;
u16 vlan_id;
u32 reserved1;
u16 reserved2;
- u8 reserved3;
- u8 checksum;
+ u8 reserved3;
+ u8 checksum;
};
/* Host Interface "Rev 1" */
u8 checksum;
};
-#define E1000_HI_MAX_DATA_LENGTH 252
+#define E1000_HI_MAX_DATA_LENGTH 252
struct e1000_host_command_info {
struct e1000_host_command_header command_header;
u8 command_data[E1000_HI_MAX_DATA_LENGTH];
/* Host Interface "Rev 2" */
struct e1000_host_mng_command_header {
- u8 command_id;
- u8 checksum;
+ u8 command_id;
+ u8 checksum;
u16 reserved1;
u16 reserved2;
u16 command_length;
};
-#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8
+#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8
struct e1000_host_mng_command_info {
struct e1000_host_mng_command_header command_header;
u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH];
};
-/* Function pointers and static data for the MAC. */
+#include "mac.h"
+#include "phy.h"
+#include "nvm.h"
+#include "manage.h"
+
struct e1000_mac_operations {
- s32 (*id_led_init)(struct e1000_hw *);
- s32 (*blink_led)(struct e1000_hw *);
- bool (*check_mng_mode)(struct e1000_hw *);
- s32 (*check_for_link)(struct e1000_hw *);
- s32 (*cleanup_led)(struct e1000_hw *);
- void (*clear_hw_cntrs)(struct e1000_hw *);
- void (*clear_vfta)(struct e1000_hw *);
- s32 (*get_bus_info)(struct e1000_hw *);
- void (*set_lan_id)(struct e1000_hw *);
- s32 (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *);
- s32 (*led_on)(struct e1000_hw *);
- s32 (*led_off)(struct e1000_hw *);
- void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32);
- s32 (*reset_hw)(struct e1000_hw *);
- s32 (*init_hw)(struct e1000_hw *);
- s32 (*setup_link)(struct e1000_hw *);
- s32 (*setup_physical_interface)(struct e1000_hw *);
- s32 (*setup_led)(struct e1000_hw *);
- void (*write_vfta)(struct e1000_hw *, u32, u32);
- s32 (*read_mac_addr)(struct e1000_hw *);
+ /* Function pointers for the MAC. */
+ s32(*init_params) (struct e1000_hw *);
+ s32(*id_led_init) (struct e1000_hw *);
+ s32(*blink_led) (struct e1000_hw *);
+ s32(*check_for_link) (struct e1000_hw *);
+ bool (*check_mng_mode) (struct e1000_hw *hw);
+ s32(*cleanup_led) (struct e1000_hw *);
+ void (*clear_hw_cntrs) (struct e1000_hw *);
+ void (*clear_vfta) (struct e1000_hw *);
+ s32(*get_bus_info) (struct e1000_hw *);
+ void (*set_lan_id) (struct e1000_hw *);
+ s32(*get_link_up_info) (struct e1000_hw *, u16 *, u16 *);
+ s32(*led_on) (struct e1000_hw *);
+ s32(*led_off) (struct e1000_hw *);
+ void (*update_mc_addr_list) (struct e1000_hw *, u8 *, u32);
+ s32(*reset_hw) (struct e1000_hw *);
+ s32(*init_hw) (struct e1000_hw *);
+ s32(*setup_link) (struct e1000_hw *);
+ s32(*setup_physical_interface) (struct e1000_hw *);
+ s32(*setup_led) (struct e1000_hw *);
+ void (*write_vfta) (struct e1000_hw *, u32, u32);
+ void (*config_collision_dist) (struct e1000_hw *);
+ void (*rar_set) (struct e1000_hw *, u8 *, u32);
+ s32(*read_mac_addr) (struct e1000_hw *);
+ s32(*validate_mdi_setting) (struct e1000_hw *);
+ s32(*mng_host_if_write) (struct e1000_hw *, u8 *, u16, u16, u8 *);
+ s32(*mng_write_cmd_header) (struct e1000_hw *hw,
+ struct e1000_host_mng_command_header *);
+ s32(*mng_enable_host_if) (struct e1000_hw *);
+ s32(*wait_autoneg) (struct e1000_hw *);
+ s32(*acquire_swfw_sync) (struct e1000_hw *, u16);
+ void (*release_swfw_sync) (struct e1000_hw *, u16);
};
/*
*
*/
struct e1000_phy_operations {
- s32 (*acquire)(struct e1000_hw *);
- s32 (*cfg_on_link_up)(struct e1000_hw *);
- s32 (*check_polarity)(struct e1000_hw *);
- s32 (*check_reset_block)(struct e1000_hw *);
- s32 (*commit)(struct e1000_hw *);
- s32 (*force_speed_duplex)(struct e1000_hw *);
- s32 (*get_cfg_done)(struct e1000_hw *hw);
- s32 (*get_cable_length)(struct e1000_hw *);
- s32 (*get_info)(struct e1000_hw *);
- s32 (*set_page)(struct e1000_hw *, u16);
- s32 (*read_reg)(struct e1000_hw *, u32, u16 *);
- s32 (*read_reg_locked)(struct e1000_hw *, u32, u16 *);
- s32 (*read_reg_page)(struct e1000_hw *, u32, u16 *);
- void (*release)(struct e1000_hw *);
- s32 (*reset)(struct e1000_hw *);
- s32 (*set_d0_lplu_state)(struct e1000_hw *, bool);
- s32 (*set_d3_lplu_state)(struct e1000_hw *, bool);
- s32 (*write_reg)(struct e1000_hw *, u32, u16);
- s32 (*write_reg_locked)(struct e1000_hw *, u32, u16);
- s32 (*write_reg_page)(struct e1000_hw *, u32, u16);
- void (*power_up)(struct e1000_hw *);
- void (*power_down)(struct e1000_hw *);
-};
-
-/* Function pointers for the NVM. */
+ s32(*init_params) (struct e1000_hw *);
+ s32(*acquire) (struct e1000_hw *);
+ s32(*cfg_on_link_up) (struct e1000_hw *);
+ s32(*check_polarity) (struct e1000_hw *);
+ s32(*check_reset_block) (struct e1000_hw *);
+ s32(*commit) (struct e1000_hw *);
+ s32(*force_speed_duplex) (struct e1000_hw *);
+ s32(*get_cfg_done) (struct e1000_hw *hw);
+ s32(*get_cable_length) (struct e1000_hw *);
+ s32(*get_info) (struct e1000_hw *);
+ s32(*set_page) (struct e1000_hw *, u16);
+ s32(*read_reg) (struct e1000_hw *, u32, u16 *);
+ s32(*read_reg_locked) (struct e1000_hw *, u32, u16 *);
+ s32(*read_reg_page) (struct e1000_hw *, u32, u16 *);
+ void (*release) (struct e1000_hw *);
+ s32(*reset) (struct e1000_hw *);
+ s32(*set_d0_lplu_state) (struct e1000_hw *, bool);
+ s32(*set_d3_lplu_state) (struct e1000_hw *, bool);
+ s32(*write_reg) (struct e1000_hw *, u32, u16);
+ s32(*write_reg_locked) (struct e1000_hw *, u32, u16);
+ s32(*write_reg_page) (struct e1000_hw *, u32, u16);
+ void (*power_up) (struct e1000_hw *);
+ void (*power_down) (struct e1000_hw *);
+};
+
struct e1000_nvm_operations {
- s32 (*acquire)(struct e1000_hw *);
- s32 (*read)(struct e1000_hw *, u16, u16, u16 *);
- void (*release)(struct e1000_hw *);
- s32 (*update)(struct e1000_hw *);
- s32 (*valid_led_default)(struct e1000_hw *, u16 *);
- s32 (*validate)(struct e1000_hw *);
- s32 (*write)(struct e1000_hw *, u16, u16, u16 *);
+ s32(*init_params) (struct e1000_hw *);
+ s32(*acquire) (struct e1000_hw *);
+ s32(*read) (struct e1000_hw *, u16, u16, u16 *);
+ void (*release) (struct e1000_hw *);
+ void (*reload) (struct e1000_hw *);
+ s32(*update) (struct e1000_hw *);
+ s32(*valid_led_default) (struct e1000_hw *, u16 *);
+ s32(*validate) (struct e1000_hw *);
+ s32(*write) (struct e1000_hw *, u16, u16, u16 *);
};
struct e1000_mac_info {
u16 mta_reg_count;
/* Maximum size of the MTA register table in all supported adapters */
- #define MAX_MTA_REG 128
+#define MAX_MTA_REG 128
u32 mta_shadow[MAX_MTA_REG];
u16 rar_entry_count;
- u8 forced_speed_duplex;
+ u8 forced_speed_duplex;
bool adaptive_ifs;
bool has_fwsm;
bool autoneg_failed;
bool get_link_status;
bool in_ifs_mode;
+ enum e1000_serdes_link_state serdes_link_state;
bool serdes_has_link;
bool tx_pkt_filtering;
- enum e1000_serdes_link_state serdes_link_state;
};
struct e1000_phy_info {
struct e1000_phy_operations ops;
-
enum e1000_phy_type type;
enum e1000_1000t_rx_status local_rx;
u32 addr;
u32 id;
- u32 reset_delay_us; /* in usec */
+ u32 reset_delay_us; /* in usec */
u32 revision;
enum e1000_media_type media_type;
struct e1000_nvm_info {
struct e1000_nvm_operations ops;
-
enum e1000_nvm_type type;
enum e1000_nvm_override override;
};
struct e1000_bus_info {
+ enum e1000_bus_type type;
+ enum e1000_bus_speed speed;
enum e1000_bus_width width;
u16 func;
+ u16 pci_cmd_word;
};
struct e1000_fc_info {
- u32 high_water; /* Flow control high-water mark */
- u32 low_water; /* Flow control low-water mark */
- u16 pause_time; /* Flow control pause timer */
- u16 refresh_time; /* Flow control refresh timer */
- bool send_xon; /* Flow control send XON */
- bool strict_ieee; /* Strict IEEE mode */
- enum e1000_fc_mode current_mode; /* FC mode in effect */
- enum e1000_fc_mode requested_mode; /* FC mode requested by caller */
+ u32 high_water; /* Flow control high-water mark */
+ u32 low_water; /* Flow control low-water mark */
+ u16 pause_time; /* Flow control pause timer */
+ u16 refresh_time; /* Flow control refresh timer */
+ bool send_xon; /* Flow control send XON */
+ bool strict_ieee; /* Strict IEEE mode */
+ enum e1000_fc_mode current_mode; /* FC mode in effect */
+ enum e1000_fc_mode requested_mode; /* FC mode requested by caller */
};
struct e1000_dev_spec_82571 {
};
struct e1000_dev_spec_80003es2lan {
- bool mdic_wa_enable;
+ bool mdic_wa_enable;
};
struct e1000_shadow_ram {
- u16 value;
+ u16 value;
bool modified;
};
-#define E1000_ICH8_SHADOW_RAM_WORDS 2048
+#define E1000_ICH8_SHADOW_RAM_WORDS 2048
struct e1000_dev_spec_ich8lan {
bool kmrn_lock_loss_workaround_enabled;
struct e1000_shadow_ram shadow_ram[E1000_ICH8_SHADOW_RAM_WORDS];
bool nvm_k1_enabled;
bool eee_disable;
+ u16 eee_lp_ability;
};
struct e1000_hw {
void __iomem *hw_addr;
void __iomem *flash_address;
- struct e1000_mac_info mac;
- struct e1000_fc_info fc;
- struct e1000_phy_info phy;
- struct e1000_nvm_info nvm;
- struct e1000_bus_info bus;
+ struct e1000_mac_info mac;
+ struct e1000_fc_info fc;
+ struct e1000_phy_info phy;
+ struct e1000_nvm_info nvm;
+ struct e1000_bus_info bus;
struct e1000_host_mng_dhcp_cookie mng_cookie;
union {
- struct e1000_dev_spec_82571 e82571;
+ struct e1000_dev_spec_82571 e82571;
struct e1000_dev_spec_80003es2lan e80003es2lan;
- struct e1000_dev_spec_ich8lan ich8lan;
+ struct e1000_dev_spec_ich8lan ich8lan;
} dev_spec;
};
+#include "82571.h"
+#include "80003es2lan.h"
+#include "ich8lan.h"
+
+/* These functions must be implemented by drivers */
+s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
+
#endif
#include "e1000.h"
-#define ICH_FLASH_GFPREG 0x0000
-#define ICH_FLASH_HSFSTS 0x0004
-#define ICH_FLASH_HSFCTL 0x0006
-#define ICH_FLASH_FADDR 0x0008
-#define ICH_FLASH_FDATA0 0x0010
-#define ICH_FLASH_PR0 0x0074
-
-#define ICH_FLASH_READ_COMMAND_TIMEOUT 500
-#define ICH_FLASH_WRITE_COMMAND_TIMEOUT 500
-#define ICH_FLASH_ERASE_COMMAND_TIMEOUT 3000000
-#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
-#define ICH_FLASH_CYCLE_REPEAT_COUNT 10
-
-#define ICH_CYCLE_READ 0
-#define ICH_CYCLE_WRITE 2
-#define ICH_CYCLE_ERASE 3
-
-#define FLASH_GFPREG_BASE_MASK 0x1FFF
-#define FLASH_SECTOR_ADDR_SHIFT 12
-
-#define ICH_FLASH_SEG_SIZE_256 256
-#define ICH_FLASH_SEG_SIZE_4K 4096
-#define ICH_FLASH_SEG_SIZE_8K 8192
-#define ICH_FLASH_SEG_SIZE_64K 65536
-
-
-#define E1000_ICH_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI Reset */
-/* FW established a valid mode */
-#define E1000_ICH_FWSM_FW_VALID 0x00008000
-
-#define E1000_ICH_MNG_IAMT_MODE 0x2
-
-#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \
- (ID_LED_DEF1_OFF2 << 8) | \
- (ID_LED_DEF1_ON2 << 4) | \
- (ID_LED_DEF1_DEF2))
-
-#define E1000_ICH_NVM_SIG_WORD 0x13
-#define E1000_ICH_NVM_SIG_MASK 0xC000
-#define E1000_ICH_NVM_VALID_SIG_MASK 0xC0
-#define E1000_ICH_NVM_SIG_VALUE 0x80
-
-#define E1000_ICH8_LAN_INIT_TIMEOUT 1500
-
-#define E1000_FEXTNVM_SW_CONFIG 1
-#define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* Bit redefined for ICH8M :/ */
-
-#define E1000_FEXTNVM4_BEACON_DURATION_MASK 0x7
-#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7
-#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3
-
-#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL
-
-#define E1000_ICH_RAR_ENTRIES 7
-
-#define PHY_PAGE_SHIFT 5
-#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
- ((reg) & MAX_PHY_REG_ADDRESS))
-#define IGP3_KMRN_DIAG PHY_REG(770, 19) /* KMRN Diagnostic */
-#define IGP3_VR_CTRL PHY_REG(776, 18) /* Voltage Regulator Control */
-
-#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002
-#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300
-#define IGP3_VR_CTRL_MODE_SHUTDOWN 0x0200
-
-#define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */
-
-#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */
-
-/* SMBus Address Phy Register */
-#define HV_SMB_ADDR PHY_REG(768, 26)
-#define HV_SMB_ADDR_MASK 0x007F
-#define HV_SMB_ADDR_PEC_EN 0x0200
-#define HV_SMB_ADDR_VALID 0x0080
-
-/* PHY Power Management Control */
-#define HV_PM_CTRL PHY_REG(770, 17)
-
-/* PHY Low Power Idle Control */
-#define I82579_LPI_CTRL PHY_REG(772, 20)
-#define I82579_LPI_CTRL_ENABLE_MASK 0x6000
-#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80
-
-/* EMI Registers */
-#define I82579_EMI_ADDR 0x10
-#define I82579_EMI_DATA 0x11
-#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */
-#define I82579_MSE_THRESHOLD 0x084F /* Mean Square Error Threshold */
-#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */
-
-/* Strapping Option Register - RO */
-#define E1000_STRAP 0x0000C
-#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000
-#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17
-
-/* OEM Bits Phy Register */
-#define HV_OEM_BITS PHY_REG(768, 25)
-#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */
-#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */
-#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */
-
-#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */
-#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */
-
-/* KMRN Mode Control */
-#define HV_KMRN_MODE_CTRL PHY_REG(769, 16)
-#define HV_KMRN_MDIO_SLOW 0x0400
-
-/* KMRN FIFO Control and Status */
-#define HV_KMRN_FIFO_CTRLSTA PHY_REG(770, 16)
-#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK 0x7000
-#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT 12
+static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw);
+static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw);
+static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw);
+static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw);
+static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw);
+static void e1000_release_swflag_ich8lan(struct e1000_hw *hw);
+static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw);
+static void e1000_release_nvm_ich8lan(struct e1000_hw *hw);
+static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw);
+static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw);
+static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index);
+static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index);
+static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw);
+static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw);
+static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active);
+static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active);
+static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active);
+static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw);
+static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw);
+static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data);
+static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw);
+static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw);
+static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw);
+static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw);
+static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw);
+static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw);
+static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw,
+ u16 *speed, u16 *duplex);
+static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw);
+static s32 e1000_led_on_ich8lan(struct e1000_hw *hw);
+static s32 e1000_led_off_ich8lan(struct e1000_hw *hw);
+static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
+static s32 e1000_setup_led_pchlan(struct e1000_hw *hw);
+static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw);
+static s32 e1000_led_on_pchlan(struct e1000_hw *hw);
+static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
+static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw);
+static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank);
+static s32 e1000_flash_cycle_ich8lan(struct e1000_hw *hw, u32 timeout);
+static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw);
+static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw);
+static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw);
+static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw,
+ u32 offset, u8 *data);
+static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
+ u8 size, u16 *data);
+static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw,
+ u32 offset, u16 *data);
+static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
+ u32 offset, u8 byte);
+static s32 e1000_write_flash_byte_ich8lan(struct e1000_hw *hw,
+ u32 offset, u8 data);
+static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
+ u8 size, u16 data);
+static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw);
+static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw);
+static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw);
+static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
+static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw);
+static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw);
+static s32 e1000_k1_workaround_lv(struct e1000_hw *hw);
+static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate);
/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
/* Offset 04h HSFSTS */
union ich8_hws_flash_status {
struct ich8_hsfsts {
- u16 flcdone :1; /* bit 0 Flash Cycle Done */
- u16 flcerr :1; /* bit 1 Flash Cycle Error */
- u16 dael :1; /* bit 2 Direct Access error Log */
- u16 berasesz :2; /* bit 4:3 Sector Erase Size */
- u16 flcinprog :1; /* bit 5 flash cycle in Progress */
- u16 reserved1 :2; /* bit 13:6 Reserved */
- u16 reserved2 :6; /* bit 13:6 Reserved */
- u16 fldesvalid :1; /* bit 14 Flash Descriptor Valid */
- u16 flockdn :1; /* bit 15 Flash Config Lock-Down */
+ u16 flcdone:1; /* bit 0 Flash Cycle Done */
+ u16 flcerr:1; /* bit 1 Flash Cycle Error */
+ u16 dael:1; /* bit 2 Direct Access error Log */
+ u16 berasesz:2; /* bit 4:3 Sector Erase Size */
+ u16 flcinprog:1; /* bit 5 flash cycle in Progress */
+ u16 reserved1:2; /* bit 13:6 Reserved */
+ u16 reserved2:6; /* bit 13:6 Reserved */
+ u16 fldesvalid:1; /* bit 14 Flash Descriptor Valid */
+ u16 flockdn:1; /* bit 15 Flash Config Lock-Down */
} hsf_status;
u16 regval;
};
/* Offset 06h FLCTL */
union ich8_hws_flash_ctrl {
struct ich8_hsflctl {
- u16 flcgo :1; /* 0 Flash Cycle Go */
- u16 flcycle :2; /* 2:1 Flash Cycle */
- u16 reserved :5; /* 7:3 Reserved */
- u16 fldbcount :2; /* 9:8 Flash Data Byte Count */
- u16 flockdn :6; /* 15:10 Reserved */
+ u16 flcgo:1; /* 0 Flash Cycle Go */
+ u16 flcycle:2; /* 2:1 Flash Cycle */
+ u16 reserved:5; /* 7:3 Reserved */
+ u16 fldbcount:2; /* 9:8 Flash Data Byte Count */
+ u16 flockdn:6; /* 15:10 Reserved */
} hsf_ctrl;
u16 regval;
};
/* ICH Flash Region Access Permissions */
union ich8_hws_flash_regacc {
struct ich8_flracc {
- u32 grra :8; /* 0:7 GbE region Read Access */
- u32 grwa :8; /* 8:15 GbE region Write Access */
- u32 gmrag :8; /* 23:16 GbE Master Read Access Grant */
- u32 gmwag :8; /* 31:24 GbE Master Write Access Grant */
+ u32 grra:8; /* 0:7 GbE region Read Access */
+ u32 grwa:8; /* 8:15 GbE region Write Access */
+ u32 gmrag:8; /* 23:16 GbE Master Read Access Grant */
+ u32 gmwag:8; /* 31:24 GbE Master Write Access Grant */
} hsf_flregacc;
u16 regval;
};
-/* ICH Flash Protected Region */
-union ich8_flash_protected_range {
- struct ich8_pr {
- u32 base:13; /* 0:12 Protected Range Base */
- u32 reserved1:2; /* 13:14 Reserved */
- u32 rpe:1; /* 15 Read Protection Enable */
- u32 limit:13; /* 16:28 Protected Range Limit */
- u32 reserved2:2; /* 29:30 Reserved */
- u32 wpe:1; /* 31 Write Protection Enable */
- } range;
- u32 regval;
-};
-
-static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw);
-static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw);
-static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw);
-static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank);
-static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
- u32 offset, u8 byte);
-static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
- u8 *data);
-static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset,
- u16 *data);
-static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
- u8 size, u16 *data);
-static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw);
-static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw);
-static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw);
-static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw);
-static s32 e1000_led_on_ich8lan(struct e1000_hw *hw);
-static s32 e1000_led_off_ich8lan(struct e1000_hw *hw);
-static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw);
-static s32 e1000_setup_led_pchlan(struct e1000_hw *hw);
-static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw);
-static s32 e1000_led_on_pchlan(struct e1000_hw *hw);
-static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
-static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active);
-static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw);
-static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
-static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
-static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw);
-static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw);
-static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw);
-static s32 e1000_k1_workaround_lv(struct e1000_hw *hw);
-static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate);
-
-static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
+/**
+ * e1000_phy_is_accessible_pchlan - Check if able to access PHY registers
+ * @hw: pointer to the HW structure
+ *
+ * Test access to the PHY registers by reading the PHY ID registers. If
+ * the PHY ID is already known (e.g. resume path) compare it with known ID,
+ * otherwise assume the read PHY ID is correct if it is valid.
+ *
+ * Assumes the sw/fw/hw semaphore is already acquired.
+ **/
+static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw)
{
- return readw(hw->flash_address + reg);
-}
+ u16 phy_reg;
+ u32 phy_id;
-static inline u32 __er32flash(struct e1000_hw *hw, unsigned long reg)
-{
- return readl(hw->flash_address + reg);
-}
+ hw->phy.ops.read_reg_locked(hw, PHY_ID1, &phy_reg);
+ phy_id = (u32)(phy_reg << 16);
+ hw->phy.ops.read_reg_locked(hw, PHY_ID2, &phy_reg);
+ phy_id |= (u32)(phy_reg & PHY_REVISION_MASK);
-static inline void __ew16flash(struct e1000_hw *hw, unsigned long reg, u16 val)
-{
- writew(val, hw->flash_address + reg);
-}
+ if (hw->phy.id) {
+ if (hw->phy.id == phy_id)
+ return true;
+ } else {
+ if ((phy_id != 0) && (phy_id != PHY_REVISION_MASK))
+ hw->phy.id = phy_id;
+ return true;
+ }
-static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
-{
- writel(val, hw->flash_address + reg);
-}
-
-#define er16flash(reg) __er16flash(hw, (reg))
-#define er32flash(reg) __er32flash(hw, (reg))
-#define ew16flash(reg, val) __ew16flash(hw, (reg), (val))
-#define ew32flash(reg, val) __ew32flash(hw, (reg), (val))
-
-static void e1000_toggle_lanphypc_value_ich8lan(struct e1000_hw *hw)
-{
- u32 ctrl;
-
- ctrl = er32(CTRL);
- ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE;
- ctrl &= ~E1000_CTRL_LANPHYPC_VALUE;
- ew32(CTRL, ctrl);
- e1e_flush();
- udelay(10);
- ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
- ew32(CTRL, ctrl);
+ return false;
}
/**
- * e1000_init_phy_params_pchlan - Initialize PHY function pointers
+ * e1000_init_phy_workarounds_pchlan - PHY initialization workarounds
* @hw: pointer to the HW structure
*
- * Initialize family-specific PHY parameters and function pointers.
+ * Workarounds/flow necessary for PHY initialization during driver load
+ * and resume paths.
**/
-static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
+static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val = 0;
+ u32 mac_reg, fwsm = er32(FWSM);
+ s32 ret_val;
+ u16 phy_reg;
- phy->addr = 1;
- phy->reset_delay_us = 100;
-
- phy->ops.set_page = e1000_set_page_igp;
- phy->ops.read_reg = e1000_read_phy_reg_hv;
- phy->ops.read_reg_locked = e1000_read_phy_reg_hv_locked;
- phy->ops.read_reg_page = e1000_read_phy_reg_page_hv;
- phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan;
- phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan;
- phy->ops.write_reg = e1000_write_phy_reg_hv;
- phy->ops.write_reg_locked = e1000_write_phy_reg_hv_locked;
- phy->ops.write_reg_page = e1000_write_phy_reg_page_hv;
- phy->ops.power_up = e1000_power_up_phy_copper;
- phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;
- phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
-
- if (!e1000_check_reset_block(hw)) {
- u32 fwsm = er32(FWSM);
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val) {
+ e_dbg("Failed to initialize PHY flow\n");
+ return ret_val;
+ }
+
+ /*
+ * The MAC-PHY interconnect may be in SMBus mode. If the PHY is
+ * inaccessible and resetting the PHY is not blocked, toggle the
+ * LANPHYPC Value bit to force the interconnect to PCIe mode.
+ */
+ switch (hw->mac.type) {
+ case e1000_pch_lpt:
+ if (e1000_phy_is_accessible_pchlan(hw))
+ break;
/*
- * The MAC-PHY interconnect may still be in SMBus mode after
- * Sx->S0. If resetting the PHY is not blocked, toggle the
- * LANPHYPC Value bit to force the interconnect to PCIe mode.
+ * Before toggling LANPHYPC, see if PHY is accessible by
+ * forcing MAC to SMBus mode first.
*/
- e1000_toggle_lanphypc_value_ich8lan(hw);
- msleep(50);
+ mac_reg = er32(CTRL_EXT);
+ mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
+ ew32(CTRL_EXT, mac_reg);
+ /* fall-through */
+ case e1000_pch2lan:
/*
* Gate automatic PHY configuration by hardware on
* non-managed 82579
!(fwsm & E1000_ICH_FWSM_FW_VALID))
e1000_gate_hw_phy_config_ich8lan(hw, true);
- /*
- * Reset the PHY before any access to it. Doing so, ensures
- * that the PHY is in a known good state before we read/write
- * PHY registers. The generic reset is sufficient here,
- * because we haven't determined the PHY type yet.
- */
- ret_val = e1000e_phy_hw_reset_generic(hw);
- if (ret_val)
- return ret_val;
+ if (e1000_phy_is_accessible_pchlan(hw)) {
+ if (hw->mac.type == e1000_pch_lpt) {
+ /* Unforce SMBus mode in PHY */
+ hw->phy.ops.read_reg_locked(hw, CV_SMB_CTRL,
+ &phy_reg);
+ phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS;
+ hw->phy.ops.write_reg_locked(hw, CV_SMB_CTRL,
+ phy_reg);
+
+ /* Unforce SMBus mode in MAC */
+ mac_reg = er32(CTRL_EXT);
+ mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
+ ew32(CTRL_EXT, mac_reg);
+ }
+ break;
+ }
- /* Ungate automatic PHY configuration on non-managed 82579 */
- if ((hw->mac.type == e1000_pch2lan) &&
- !(fwsm & E1000_ICH_FWSM_FW_VALID)) {
- usleep_range(10000, 20000);
- e1000_gate_hw_phy_config_ich8lan(hw, false);
+ /* fall-through */
+ case e1000_pchlan:
+ if ((hw->mac.type == e1000_pchlan) &&
+ (fwsm & E1000_ICH_FWSM_FW_VALID))
+ break;
+
+ if (hw->phy.ops.check_reset_block(hw)) {
+ e_dbg("Required LANPHYPC toggle blocked by ME\n");
+ break;
}
- }
- phy->id = e1000_phy_unknown;
- switch (hw->mac.type) {
+ e_dbg("Toggling LANPHYPC\n");
+
+ /* Set Phy Config Counter to 50msec */
+ mac_reg = er32(FEXTNVM3);
+ mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK;
+ mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
+ ew32(FEXTNVM3, mac_reg);
+
+ /* Toggle LANPHYPC Value bit */
+ mac_reg = er32(CTRL);
+ mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE;
+ mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE;
+ ew32(CTRL, mac_reg);
+ e1e_flush();
+ udelay(10);
+ mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
+ ew32(CTRL, mac_reg);
+ e1e_flush();
+ if (hw->mac.type < e1000_pch_lpt) {
+ msleep(50);
+ } else {
+ u16 count = 20;
+ do {
+ usleep_range(5000, 10000);
+ } while (!(er32(CTRL_EXT) &
+ E1000_CTRL_EXT_LPCD) && count--);
+ }
+ break;
default:
- ret_val = e1000e_get_phy_id(hw);
- if (ret_val)
- return ret_val;
- if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK))
- break;
- /* fall-through */
- case e1000_pch2lan:
- /*
- * In case the PHY needs to be in mdio slow mode,
- * set slow mode and try to get the PHY id again.
- */
- ret_val = e1000_set_mdio_slow_mode_hv(hw);
- if (ret_val)
- return ret_val;
- ret_val = e1000e_get_phy_id(hw);
- if (ret_val)
- return ret_val;
break;
}
+
+ hw->phy.ops.release(hw);
+
+ /*
+ * Reset the PHY before any access to it. Doing so, ensures
+ * that the PHY is in a known good state before we read/write
+ * PHY registers. The generic reset is sufficient here,
+ * because we haven't determined the PHY type yet.
+ */
+ ret_val = e1000e_phy_hw_reset_generic(hw);
+
+ /* Ungate automatic PHY configuration on non-managed 82579 */
+ if ((hw->mac.type == e1000_pch2lan) &&
+ !(fwsm & E1000_ICH_FWSM_FW_VALID)) {
+ usleep_range(10000, 20000);
+ e1000_gate_hw_phy_config_ich8lan(hw, false);
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_init_phy_params_pchlan - Initialize PHY function pointers
+ * @hw: pointer to the HW structure
+ *
+ * Initialize family-specific PHY parameters and function pointers.
+ **/
+static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+
+ phy->addr = 1;
+ phy->reset_delay_us = 100;
+
+ phy->ops.acquire = e1000_acquire_swflag_ich8lan;
+ phy->ops.check_reset_block = e1000_check_reset_block_ich8lan;
+ phy->ops.get_cfg_done = e1000_get_cfg_done_ich8lan;
+ phy->ops.set_page = e1000_set_page_igp;
+ phy->ops.read_reg = e1000_read_phy_reg_hv;
+ phy->ops.read_reg_locked = e1000_read_phy_reg_hv_locked;
+ phy->ops.read_reg_page = e1000_read_phy_reg_page_hv;
+ phy->ops.release = e1000_release_swflag_ich8lan;
+ phy->ops.reset = e1000_phy_hw_reset_ich8lan;
+ phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan;
+ phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan;
+ phy->ops.write_reg = e1000_write_phy_reg_hv;
+ phy->ops.write_reg_locked = e1000_write_phy_reg_hv_locked;
+ phy->ops.write_reg_page = e1000_write_phy_reg_page_hv;
+ phy->ops.power_up = e1000_power_up_phy_copper;
+ phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;
+ phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+ phy->id = e1000_phy_unknown;
+
+ ret_val = e1000_init_phy_workarounds_pchlan(hw);
+ if (ret_val)
+ return ret_val;
+
+ if (phy->id == e1000_phy_unknown)
+ switch (hw->mac.type) {
+ default:
+ ret_val = e1000e_get_phy_id(hw);
+ if (ret_val)
+ return ret_val;
+ if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK))
+ break;
+ /* fall-through */
+ case e1000_pch2lan:
+ case e1000_pch_lpt:
+ /*
+ * In case the PHY needs to be in mdio slow mode,
+ * set slow mode and try to get the PHY id again.
+ */
+ ret_val = e1000_set_mdio_slow_mode_hv(hw);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000e_get_phy_id(hw);
+ if (ret_val)
+ return ret_val;
+ break;
+ }
phy->type = e1000e_get_phy_type_from_id(phy->id);
switch (phy->type) {
case e1000_phy_82577:
case e1000_phy_82579:
+ case e1000_phy_i217:
phy->ops.check_polarity = e1000_check_polarity_82577;
phy->ops.force_speed_duplex =
e1000_phy_force_speed_duplex_82577;
s32 ret_val;
u16 i = 0;
- phy->addr = 1;
- phy->reset_delay_us = 100;
-
- phy->ops.power_up = e1000_power_up_phy_copper;
- phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;
+ phy->addr = 1;
+ phy->reset_delay_us = 100;
+
+ phy->ops.acquire = e1000_acquire_swflag_ich8lan;
+ phy->ops.check_reset_block = e1000_check_reset_block_ich8lan;
+ phy->ops.get_cable_length = e1000e_get_cable_length_igp_2;
+ phy->ops.get_cfg_done = e1000_get_cfg_done_ich8lan;
+ phy->ops.read_reg = e1000e_read_phy_reg_igp;
+ phy->ops.release = e1000_release_swflag_ich8lan;
+ phy->ops.reset = e1000_phy_hw_reset_ich8lan;
+ phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_ich8lan;
+ phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_ich8lan;
+ phy->ops.write_reg = e1000e_write_phy_reg_igp;
+ phy->ops.power_up = e1000_power_up_phy_copper;
+ phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;
/*
* We may need to do this twice - once for IGP and if that fails,
ret_val = e1000e_determine_phy_address(hw);
if (ret_val) {
phy->ops.write_reg = e1000e_write_phy_reg_bm;
- phy->ops.read_reg = e1000e_read_phy_reg_bm;
+ phy->ops.read_reg = e1000e_read_phy_reg_bm;
ret_val = e1000e_determine_phy_address(hw);
if (ret_val) {
e_dbg("Cannot determine PHY addr. Erroring out\n");
* size represents two separate NVM banks.
*/
nvm->flash_bank_size = (sector_end_addr - sector_base_addr)
- << FLASH_SECTOR_ADDR_SHIFT;
+ << FLASH_SECTOR_ADDR_SHIFT;
nvm->flash_bank_size /= 2;
/* Adjust to word count */
nvm->flash_bank_size /= sizeof(u16);
/* Clear shadow ram */
for (i = 0; i < nvm->word_size; i++) {
dev_spec->shadow_ram[i].modified = false;
- dev_spec->shadow_ram[i].value = 0xFFFF;
+ dev_spec->shadow_ram[i].value = 0xFFFF;
}
+ /* Function Pointers */
+ nvm->ops.acquire = e1000_acquire_nvm_ich8lan;
+ nvm->ops.release = e1000_release_nvm_ich8lan;
+ nvm->ops.read = e1000_read_nvm_ich8lan;
+ nvm->ops.update = e1000_update_nvm_checksum_ich8lan;
+ nvm->ops.valid_led_default = e1000_valid_led_default_ich8lan;
+ nvm->ops.validate = e1000_validate_nvm_checksum_ich8lan;
+ nvm->ops.write = e1000_write_nvm_ich8lan;
+
return 0;
}
/* Adaptive IFS supported */
mac->adaptive_ifs = true;
- /* LED operations */
+ /* Function pointers */
+
+ /* bus type/speed/width */
+ mac->ops.get_bus_info = e1000_get_bus_info_ich8lan;
+ /* function id */
+ mac->ops.set_lan_id = e1000_set_lan_id_single_port;
+ /* reset */
+ mac->ops.reset_hw = e1000_reset_hw_ich8lan;
+ /* hw initialization */
+ mac->ops.init_hw = e1000_init_hw_ich8lan;
+ /* link setup */
+ mac->ops.setup_link = e1000_setup_link_ich8lan;
+ /* physical interface setup */
+ mac->ops.setup_physical_interface = e1000_setup_copper_link_ich8lan;
+ /* check for link */
+ mac->ops.check_for_link = e1000_check_for_copper_link_ich8lan;
+ /* link info */
+ mac->ops.get_link_up_info = e1000_get_link_up_info_ich8lan;
+ /* multicast address update */
+ mac->ops.update_mc_addr_list = e1000e_update_mc_addr_list_generic;
+ /* clear hardware counters */
+ mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan;
+
+ /* LED and other operations */
switch (mac->type) {
case e1000_ich8lan:
case e1000_ich9lan:
/* check management mode */
mac->ops.check_mng_mode = e1000_check_mng_mode_ich8lan;
/* ID LED init */
- mac->ops.id_led_init = e1000e_id_led_init;
+ mac->ops.id_led_init = e1000e_id_led_init_generic;
/* blink LED */
mac->ops.blink_led = e1000e_blink_led_generic;
/* setup LED */
mac->ops.led_on = e1000_led_on_ich8lan;
mac->ops.led_off = e1000_led_off_ich8lan;
break;
- case e1000_pchlan:
case e1000_pch2lan:
+ mac->rar_entry_count = E1000_PCH2_RAR_ENTRIES;
+ mac->ops.rar_set = e1000_rar_set_pch2lan;
+ /* fall-through */
+ case e1000_pch_lpt:
+ case e1000_pchlan:
/* check management mode */
mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan;
/* ID LED init */
break;
}
+ if (mac->type == e1000_pch_lpt) {
+ mac->rar_entry_count = E1000_PCH_LPT_RAR_ENTRIES;
+ mac->ops.rar_set = e1000_rar_set_pch_lpt;
+ }
+
/* Enable PCS Lock-loss workaround for ICH8 */
if (mac->type == e1000_ich8lan)
e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true);
- /* Gate automatic PHY configuration by hardware on managed 82579 */
- if ((mac->type == e1000_pch2lan) &&
+ /*
+ * Gate automatic PHY configuration by hardware on managed
+ * 82579 and i217
+ */
+ if ((mac->type == e1000_pch2lan || mac->type == e1000_pch_lpt) &&
(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
e1000_gate_hw_phy_config_ich8lan(hw, true);
**/
static s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
{
+ struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
s32 ret_val = 0;
u16 phy_reg;
- if (hw->phy.type != e1000_phy_82579)
+ if ((hw->phy.type != e1000_phy_82579) &&
+ (hw->phy.type != e1000_phy_i217))
return 0;
ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg);
if (ret_val)
return ret_val;
- if (hw->dev_spec.ich8lan.eee_disable)
+ if (dev_spec->eee_disable)
phy_reg &= ~I82579_LPI_CTRL_ENABLE_MASK;
else
phy_reg |= I82579_LPI_CTRL_ENABLE_MASK;
- return e1e_wphy(hw, I82579_LPI_CTRL, phy_reg);
+ ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->phy.type == e1000_phy_i217) && !dev_spec->eee_disable) {
+ /* Save off link partner's EEE ability */
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+ ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_ADDR,
+ I217_EEE_LP_ABILITY);
+ if (ret_val)
+ goto release;
+ hw->phy.ops.read_reg_locked(hw, I82579_EMI_DATA,
+ &dev_spec->eee_lp_ability);
+
+ /*
+ * EEE is not supported in 100Half, so ignore partner's EEE
+ * in 100 ability if full-duplex is not advertised.
+ */
+ hw->phy.ops.read_reg_locked(hw, PHY_LP_ABILITY, &phy_reg);
+ if (!(phy_reg & NWAY_LPAR_100TX_FD_CAPS))
+ dev_spec->eee_lp_ability &= ~I217_EEE_100_SUPPORTED;
+release:
+ hw->phy.ops.release(hw);
+ }
+
+ return 0;
}
/**
return ret_val;
}
+ /* Clear link partner's EEE ability */
+ hw->dev_spec.ich8lan.eee_lp_ability = 0;
+
if (!link)
- return 0; /* No link detected */
+ return 0; /* No link detected */
mac->get_link_status = false;
* of MAC speed/duplex configuration. So we only need to
* configure Collision Distance in the MAC.
*/
- e1000e_config_collision_dist(hw);
+ mac->ops.config_collision_dist(hw);
/*
* Configure Flow Control now that Auto-Neg has completed.
return ret_val;
}
-static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
+/**
+ * e1000_init_function_pointers_ich8lan - Initialize ICH8 function pointers
+ * @hw: pointer to the HW structure
+ *
+ * Initialize family-specific function pointers for PHY, MAC, and NVM.
+ **/
+void e1000_init_function_pointers_ich8lan(struct e1000_hw *hw)
{
- struct e1000_hw *hw = &adapter->hw;
- s32 rc;
-
- rc = e1000_init_mac_params_ich8lan(hw);
- if (rc)
- return rc;
-
- rc = e1000_init_nvm_params_ich8lan(hw);
- if (rc)
- return rc;
-
+ e1000_init_mac_ops_generic(hw);
+ e1000_init_nvm_ops_generic(hw);
+ hw->mac.ops.init_params = e1000_init_mac_params_ich8lan;
+ hw->nvm.ops.init_params = e1000_init_nvm_params_ich8lan;
switch (hw->mac.type) {
case e1000_ich8lan:
case e1000_ich9lan:
case e1000_ich10lan:
- rc = e1000_init_phy_params_ich8lan(hw);
+ hw->phy.ops.init_params = e1000_init_phy_params_ich8lan;
break;
case e1000_pchlan:
case e1000_pch2lan:
- rc = e1000_init_phy_params_pchlan(hw);
+ case e1000_pch_lpt:
+ hw->phy.ops.init_params = e1000_init_phy_params_pchlan;
break;
default:
break;
}
- if (rc)
- return rc;
-
- /*
- * Disable Jumbo Frame support on parts with Intel 10/100 PHY or
- * on parts with MACsec enabled in NVM (reflected in CTRL_EXT).
- */
- if ((adapter->hw.phy.type == e1000_phy_ife) ||
- ((adapter->hw.mac.type >= e1000_pch2lan) &&
- (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LSECCK)))) {
- adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES;
- adapter->max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN;
-
- hw->mac.ops.blink_led = NULL;
- }
-
- if ((adapter->hw.mac.type == e1000_ich8lan) &&
- (adapter->hw.phy.type != e1000_phy_ife))
- adapter->flags |= FLAG_LSC_GIG_SPEED_DROP;
-
- /* Enable workaround for 82579 w/ ME enabled */
- if ((adapter->hw.mac.type == e1000_pch2lan) &&
- (er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
- adapter->flags2 |= FLAG2_PCIM2PCI_ARBITER_WA;
-
- /* Disable EEE by default until IEEE802.3az spec is finalized */
- if (adapter->flags2 & FLAG2_HAS_EEE)
- adapter->hw.dev_spec.ich8lan.eee_disable = true;
-
- return 0;
}
static DEFINE_MUTEX(nvm_mutex);
if (!timeout) {
e_dbg("Failed to acquire the semaphore, FW or HW has it: FWSM=0x%8.8x EXTCNF_CTRL=0x%8.8x)\n",
- er32(FWSM), extcnf_ctrl);
+ er32(FWSM), extcnf_ctrl);
extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
ew32(EXTCNF_CTRL, extcnf_ctrl);
ret_val = -E1000_ERR_CONFIG;
fwsm = er32(FWSM);
return (fwsm & E1000_ICH_FWSM_FW_VALID) &&
- ((fwsm & E1000_FWSM_MODE_MASK) ==
- (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
+ ((fwsm & E1000_FWSM_MODE_MASK) ==
+ (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
}
/**
fwsm = er32(FWSM);
return (fwsm & E1000_ICH_FWSM_FW_VALID) &&
- (fwsm & (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
+ (fwsm & (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
+}
+
+/**
+ * e1000_rar_set_pch2lan - Set receive address register
+ * @hw: pointer to the HW structure
+ * @addr: pointer to the receive address
+ * @index: receive address array register
+ *
+ * Sets the receive address array register at index to the address passed
+ * in by addr. For 82579, RAR[0] is the base address register that is to
+ * contain the MAC address but RAR[1-6] are reserved for manageability (ME).
+ * Use SHRA[0-3] in place of those reserved for ME.
+ **/
+static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+ u32 rar_low, rar_high;
+
+ /*
+ * HW expects these in little endian so we reverse the byte order
+ * from network order (big endian) to little endian
+ */
+ rar_low = ((u32)addr[0] |
+ ((u32)addr[1] << 8) |
+ ((u32)addr[2] << 16) | ((u32)addr[3] << 24));
+
+ rar_high = ((u32)addr[4] | ((u32)addr[5] << 8));
+
+ /* If MAC address zero, no need to set the AV bit */
+ if (rar_low || rar_high)
+ rar_high |= E1000_RAH_AV;
+
+ if (index == 0) {
+ ew32(RAL(index), rar_low);
+ e1e_flush();
+ ew32(RAH(index), rar_high);
+ e1e_flush();
+ return;
+ }
+
+ if (index < hw->mac.rar_entry_count) {
+ s32 ret_val;
+
+ ret_val = e1000_acquire_swflag_ich8lan(hw);
+ if (ret_val)
+ goto out;
+
+ ew32(SHRAL(index - 1), rar_low);
+ e1e_flush();
+ ew32(SHRAH(index - 1), rar_high);
+ e1e_flush();
+
+ e1000_release_swflag_ich8lan(hw);
+
+ /* verify the register updates */
+ if ((er32(SHRAL(index - 1)) == rar_low) &&
+ (er32(SHRAH(index - 1)) == rar_high))
+ return;
+
+ e_dbg("SHRA[%d] might be locked by ME - FWSM=0x%8.8x\n",
+ (index - 1), er32(FWSM));
+ }
+
+out:
+ e_dbg("Failed to write receive address at index %d\n", index);
+}
+
+/**
+ * e1000_rar_set_pch_lpt - Set receive address registers
+ * @hw: pointer to the HW structure
+ * @addr: pointer to the receive address
+ * @index: receive address array register
+ *
+ * Sets the receive address register array at index to the address passed
+ * in by addr. For LPT, RAR[0] is the base address register that is to
+ * contain the MAC address. SHRA[0-10] are the shared receive address
+ * registers that are shared between the Host and manageability engine (ME).
+ **/
+static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+ u32 rar_low, rar_high;
+ u32 wlock_mac;
+
+ /*
+ * HW expects these in little endian so we reverse the byte order
+ * from network order (big endian) to little endian
+ */
+ rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) |
+ ((u32)addr[2] << 16) | ((u32)addr[3] << 24));
+
+ rar_high = ((u32)addr[4] | ((u32)addr[5] << 8));
+
+ /* If MAC address zero, no need to set the AV bit */
+ if (rar_low || rar_high)
+ rar_high |= E1000_RAH_AV;
+
+ if (index == 0) {
+ ew32(RAL(index), rar_low);
+ e1e_flush();
+ ew32(RAH(index), rar_high);
+ e1e_flush();
+ return;
+ }
+
+ /*
+ * The manageability engine (ME) can lock certain SHRAR registers that
+ * it is using - those registers are unavailable for use.
+ */
+ if (index < hw->mac.rar_entry_count) {
+ wlock_mac = er32(FWSM) & E1000_FWSM_WLOCK_MAC_MASK;
+ wlock_mac >>= E1000_FWSM_WLOCK_MAC_SHIFT;
+
+ /* Check if all SHRAR registers are locked */
+ if (wlock_mac == 1)
+ goto out;
+
+ if ((wlock_mac == 0) || (index <= wlock_mac)) {
+ s32 ret_val;
+
+ ret_val = e1000_acquire_swflag_ich8lan(hw);
+
+ if (ret_val)
+ goto out;
+
+ ew32(SHRAL_PCH_LPT(index - 1), rar_low);
+ e1e_flush();
+ ew32(SHRAH_PCH_LPT(index - 1), rar_high);
+ e1e_flush();
+
+ e1000_release_swflag_ich8lan(hw);
+
+ /* verify the register updates */
+ if ((er32(SHRAL_PCH_LPT(index - 1)) == rar_low) &&
+ (er32(SHRAH_PCH_LPT(index - 1)) == rar_high))
+ return;
+ }
+ }
+
+out:
+ e_dbg("Failed to write receive address at index %d\n", index);
}
/**
u32 fwsm;
fwsm = er32(FWSM);
-
return (fwsm & E1000_ICH_FWSM_RSPCIPHY) ? 0 : E1000_BLK_PHY_RESET;
}
{
u16 phy_data;
u32 strap = er32(STRAP);
+ u32 freq = (strap & E1000_STRAP_SMT_FREQ_MASK) >>
+ E1000_STRAP_SMT_FREQ_SHIFT;
s32 ret_val = 0;
strap &= E1000_STRAP_SMBUS_ADDRESS_MASK;
phy_data |= (strap >> E1000_STRAP_SMBUS_ADDRESS_SHIFT);
phy_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID;
+ if (hw->phy.type == e1000_phy_i217) {
+ /* Restore SMBus frequency */
+ if (freq--) {
+ phy_data &= ~HV_SMB_ADDR_FREQ_MASK;
+ phy_data |= (freq & (1 << 0)) <<
+ HV_SMB_ADDR_FREQ_LOW_SHIFT;
+ phy_data |= (freq & (1 << 1)) <<
+ HV_SMB_ADDR_FREQ_HIGH_SHIFT;
+ } else {
+ e_dbg("Unsupported SMB frequency in PHY\n");
+ }
+ }
+
return e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, phy_data);
}
/* Fall-thru */
case e1000_pchlan:
case e1000_pch2lan:
+ case e1000_pch_lpt:
sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
break;
default:
* extended configuration before SW configuration
*/
data = er32(EXTCNF_CTRL);
- if (!(hw->mac.type == e1000_pch2lan)) {
- if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
- goto release;
- }
+ if ((hw->mac.type < e1000_pch2lan) &&
+ (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE))
+ goto release;
cnf_size = er32(EXTCNF_SIZE);
cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
- if ((!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) &&
- (hw->mac.type == e1000_pchlan)) ||
- (hw->mac.type == e1000_pch2lan)) {
+ if (((hw->mac.type == e1000_pchlan) &&
+ !(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)) ||
+ (hw->mac.type > e1000_pchlan)) {
/*
* HW configures the SMBus address and LEDs when the
* OEM and LCD Write Enable bits are set in the NVM.
word_addr = (u16)(cnf_base_addr << 1);
for (i = 0; i < cnf_size; i++) {
- ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1,
- ®_data);
+ ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1, ®_data);
if (ret_val)
goto release;
if (link) {
if (hw->phy.type == e1000_phy_82578) {
ret_val = hw->phy.ops.read_reg_locked(hw, BM_CS_STATUS,
- &status_reg);
+ &status_reg);
if (ret_val)
goto release;
status_reg &= BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_MASK;
+ BM_CS_STATUS_RESOLVED | BM_CS_STATUS_SPEED_MASK;
if (status_reg == (BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_1000))
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_1000))
k1_enable = false;
}
if (hw->phy.type == e1000_phy_82577) {
ret_val = hw->phy.ops.read_reg_locked(hw, HV_M_STATUS,
- &status_reg);
+ &status_reg);
if (ret_val)
goto release;
status_reg &= HV_M_STATUS_LINK_UP |
- HV_M_STATUS_AUTONEG_COMPLETE |
- HV_M_STATUS_SPEED_MASK;
+ HV_M_STATUS_AUTONEG_COMPLETE |
+ HV_M_STATUS_SPEED_MASK;
if (status_reg == (HV_M_STATUS_LINK_UP |
- HV_M_STATUS_AUTONEG_COMPLETE |
- HV_M_STATUS_SPEED_1000))
+ HV_M_STATUS_AUTONEG_COMPLETE |
+ HV_M_STATUS_SPEED_1000))
k1_enable = false;
}
/* Link stall fix for link up */
ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19),
- 0x0100);
+ 0x0100);
if (ret_val)
goto release;
} else {
/* Link stall fix for link down */
ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19),
- 0x4100);
+ 0x4100);
if (ret_val)
goto release;
}
u32 reg = 0;
u16 kmrn_reg = 0;
- ret_val = e1000e_read_kmrn_reg_locked(hw,
- E1000_KMRNCTRLSTA_K1_CONFIG,
- &kmrn_reg);
+ ret_val = e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
+ &kmrn_reg);
if (ret_val)
return ret_val;
else
kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE;
- ret_val = e1000e_write_kmrn_reg_locked(hw,
- E1000_KMRNCTRLSTA_K1_CONFIG,
- kmrn_reg);
+ ret_val = e1000e_write_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
+ kmrn_reg);
if (ret_val)
return ret_val;
u32 mac_reg;
u16 oem_reg;
- if ((hw->mac.type != e1000_pch2lan) && (hw->mac.type != e1000_pchlan))
+ if (hw->mac.type < e1000_pchlan)
return ret_val;
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
return ret_val;
- if (!(hw->mac.type == e1000_pch2lan)) {
+ if (hw->mac.type == e1000_pchlan) {
mac_reg = er32(EXTCNF_CTRL);
if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)
goto release;
return ret_val;
}
-
/**
* e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode
* @hw: pointer to the HW structure
u32 mac_reg;
u16 i;
- if (hw->mac.type != e1000_pch2lan)
+ if ((hw->mac.type != e1000_pch2lan) && (hw->mac.type != e1000_pch_lpt))
return 0;
/* disable Rx path while enabling/disabling workaround */
* SHRAL/H) and initial CRC values to the MAC
*/
for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) {
- u8 mac_addr[ETH_ALEN] = {0};
+ u8 mac_addr[ETH_ALEN] = { 0 };
u32 addr_high, addr_low;
addr_high = er32(RAH(i));
ew32(RCTL, mac_reg);
ret_val = e1000e_read_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_CTRL_OFFSET,
- &data);
+ E1000_KMRNCTRLSTA_CTRL_OFFSET,
+ &data);
if (ret_val)
return ret_val;
ret_val = e1000e_write_kmrn_reg(hw,
if (ret_val)
return ret_val;
ret_val = e1000e_read_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_HD_CTRL,
- &data);
+ E1000_KMRNCTRLSTA_HD_CTRL,
+ &data);
if (ret_val)
return ret_val;
data &= ~(0xF << 8);
ew32(RCTL, mac_reg);
ret_val = e1000e_read_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_CTRL_OFFSET,
- &data);
+ E1000_KMRNCTRLSTA_CTRL_OFFSET,
+ &data);
if (ret_val)
return ret_val;
ret_val = e1000e_write_kmrn_reg(hw,
if (ret_val)
return ret_val;
ret_val = e1000e_read_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_HD_CTRL,
- &data);
+ E1000_KMRNCTRLSTA_HD_CTRL,
+ &data);
if (ret_val)
return ret_val;
data &= ~(0xF << 8);
return ret_val;
if (status_reg & HV_M_STATUS_SPEED_1000) {
+ u16 pm_phy_reg;
+
mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC;
phy_reg &= ~I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT;
+ /* LV 1G Packet drop issue wa */
+ ret_val = e1e_rphy(hw, HV_PM_CTRL, &pm_phy_reg);
+ if (ret_val)
+ return ret_val;
+ pm_phy_reg &= ~HV_PM_CTRL_PLL_STOP_IN_K1_GIGA;
+ ret_val = e1e_wphy(hw, HV_PM_CTRL, pm_phy_reg);
+ if (ret_val)
+ return ret_val;
} else {
mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC;
phy_reg |= I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT;
{
u32 extcnf_ctrl;
- if (hw->mac.type != e1000_pch2lan)
+ if ((hw->mac.type != e1000_pch2lan) && (hw->mac.type != e1000_pch_lpt))
return;
extcnf_ctrl = er32(EXTCNF_CTRL);
s32 ret_val = 0;
u16 reg;
- if (e1000_check_reset_block(hw))
+ if (hw->phy.ops.check_reset_block(hw))
return 0;
/* Allow time for h/w to get to quiescent state after reset */
else
oem_reg &= ~HV_OEM_BITS_LPLU;
- if (!e1000_check_reset_block(hw))
+ if (!hw->phy.ops.check_reset_block(hw))
oem_reg |= HV_OEM_BITS_RESTART_AN;
return e1e_wphy(hw, HV_OEM_BITS, oem_reg);
* SmartSpeed, so performance is maintained.
*/
if (phy->smart_speed == e1000_smart_speed_on) {
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
+ ret_val = e1e_rphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG, &data);
if (ret_val)
return ret_val;
data |= IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
+ ret_val = e1e_wphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG, data);
if (ret_val)
return ret_val;
} else if (phy->smart_speed == e1000_smart_speed_off) {
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
+ ret_val = e1e_rphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG, &data);
if (ret_val)
return ret_val;
data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
+ ret_val = e1e_wphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG, data);
if (ret_val)
return ret_val;
}
* SmartSpeed, so performance is maintained.
*/
if (phy->smart_speed == e1000_smart_speed_on) {
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
+ ret_val = e1e_rphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG, &data);
if (ret_val)
return ret_val;
data |= IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
+ ret_val = e1e_wphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG, data);
if (ret_val)
return ret_val;
} else if (phy->smart_speed == e1000_smart_speed_off) {
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
+ ret_val = e1e_rphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG, &data);
if (ret_val)
return ret_val;
data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
+ ret_val = e1e_wphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG, data);
if (ret_val)
return ret_val;
}
/* Check bank 0 */
ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset,
- &sig_byte);
+ &sig_byte);
if (ret_val)
return ret_val;
if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
/* Check bank 1 */
ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset +
- bank1_offset,
- &sig_byte);
+ bank1_offset,
+ &sig_byte);
if (ret_val)
return ret_val;
if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
ret_val = 0;
for (i = 0; i < words; i++) {
- if (dev_spec->shadow_ram[offset+i].modified) {
- data[i] = dev_spec->shadow_ram[offset+i].value;
+ if (dev_spec->shadow_ram[offset + i].modified) {
+ data[i] = dev_spec->shadow_ram[offset + i].value;
} else {
ret_val = e1000_read_flash_word_ich8lan(hw,
act_offset + i,
hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
/* Check if the flash descriptor is valid */
- if (hsfsts.hsf_status.fldesvalid == 0) {
+ if (!hsfsts.hsf_status.fldesvalid) {
e_dbg("Flash descriptor invalid. SW Sequencing must be used.\n");
return -E1000_ERR_NVM;
}
* completed.
*/
- if (hsfsts.hsf_status.flcinprog == 0) {
+ if (!hsfsts.hsf_status.flcinprog) {
/*
* There is no cycle running at present,
* so we can start a cycle.
*/
for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) {
hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.flcinprog == 0) {
+ if (!hsfsts.hsf_status.flcinprog) {
ret_val = 0;
break;
}
/* wait till FDONE bit is set to 1 */
do {
hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.flcdone == 1)
+ if (hsfsts.hsf_status.flcdone)
break;
udelay(1);
} while (i++ < timeout);
- if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0)
+ if (hsfsts.hsf_status.flcdone && !hsfsts.hsf_status.flcerr)
return 0;
return -E1000_ERR_NVM;
{
/* Must convert offset into bytes. */
offset <<= 1;
-
return e1000_read_flash_data_ich8lan(hw, offset, 2, data);
}
s32 ret_val = -E1000_ERR_NVM;
u8 count = 0;
- if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK)
+ if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK)
return -E1000_ERR_NVM;
-
flash_linear_addr = (ICH_FLASH_LINEAR_ADDR_MASK & offset) +
- hw->nvm.flash_base_addr;
+ hw->nvm.flash_base_addr;
do {
udelay(1);
ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
ret_val = e1000_flash_cycle_ich8lan(hw,
- ICH_FLASH_READ_COMMAND_TIMEOUT);
+ ICH_FLASH_READ_COMMAND_TIMEOUT);
/*
* Check if FCERR is set to 1, if set to 1, clear it
* ICH_FLASH_CYCLE_REPEAT_COUNT times.
*/
hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.flcerr == 1) {
+ if (hsfsts.hsf_status.flcerr) {
/* Repeat for some time before giving up. */
continue;
- } else if (hsfsts.hsf_status.flcdone == 0) {
+ } else if (!hsfsts.hsf_status.flcdone) {
e_dbg("Timeout error - flash cycle did not complete.\n");
break;
}
nvm->ops.acquire(hw);
for (i = 0; i < words; i++) {
- dev_spec->shadow_ram[offset+i].modified = true;
- dev_spec->shadow_ram[offset+i].value = data[i];
+ dev_spec->shadow_ram[offset + i].modified = true;
+ dev_spec->shadow_ram[offset + i].value = data[i];
}
nvm->ops.release(hw);
* write to bank 0 etc. We also need to erase the segment that
* is going to be written
*/
- ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
+ ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
if (ret_val) {
e_dbg("Could not detect valid bank, assuming bank 0\n");
bank = 0;
data = dev_spec->shadow_ram[i].value;
} else {
ret_val = e1000_read_flash_word_ich8lan(hw, i +
- old_bank_offset,
- &data);
+ old_bank_offset,
+ &data);
if (ret_val)
break;
}
udelay(100);
ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
- act_offset + 1,
- (u8)(data >> 8));
+ act_offset + 1,
+ (u8)(data >> 8));
if (ret_val)
break;
}
* programming failed.
*/
if (ret_val) {
- /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */
e_dbg("Flash commit failed.\n");
goto release;
}
* until after the next adapter reset.
*/
if (!ret_val) {
- e1000e_reload_nvm(hw);
+ nvm->ops.reload(hw);
usleep_range(10000, 20000);
}
if (ret_val)
return ret_val;
- if ((data & 0x40) == 0) {
+ if (!(data & 0x40)) {
data |= 0x40;
ret_val = e1000_write_nvm(hw, 0x19, 1, &data);
if (ret_val)
return e1000e_validate_nvm_checksum_generic(hw);
}
-/**
- * e1000e_write_protect_nvm_ich8lan - Make the NVM read-only
- * @hw: pointer to the HW structure
- *
- * To prevent malicious write/erase of the NVM, set it to be read-only
- * so that the hardware ignores all write/erase cycles of the NVM via
- * the flash control registers. The shadow-ram copy of the NVM will
- * still be updated, however any updates to this copy will not stick
- * across driver reloads.
- **/
-void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- union ich8_flash_protected_range pr0;
- union ich8_hws_flash_status hsfsts;
- u32 gfpreg;
-
- nvm->ops.acquire(hw);
-
- gfpreg = er32flash(ICH_FLASH_GFPREG);
-
- /* Write-protect GbE Sector of NVM */
- pr0.regval = er32flash(ICH_FLASH_PR0);
- pr0.range.base = gfpreg & FLASH_GFPREG_BASE_MASK;
- pr0.range.limit = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK);
- pr0.range.wpe = true;
- ew32flash(ICH_FLASH_PR0, pr0.regval);
-
- /*
- * Lock down a subset of GbE Flash Control Registers, e.g.
- * PR0 to prevent the write-protection from being lifted.
- * Once FLOCKDN is set, the registers protected by it cannot
- * be written until FLOCKDN is cleared by a hardware reset.
- */
- hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
- hsfsts.hsf_status.flockdn = true;
- ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval);
-
- nvm->ops.release(hw);
-}
-
/**
* e1000_write_flash_data_ich8lan - Writes bytes to the NVM
* @hw: pointer to the HW structure
return -E1000_ERR_NVM;
flash_linear_addr = (ICH_FLASH_LINEAR_ADDR_MASK & offset) +
- hw->nvm.flash_base_addr;
+ hw->nvm.flash_base_addr;
do {
udelay(1);
hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
/* 0b/1b corresponds to 1 or 2 byte size, respectively. */
- hsflctl.hsf_ctrl.fldbcount = size -1;
+ hsflctl.hsf_ctrl.fldbcount = size - 1;
hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE;
ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
* and try the whole sequence a few more times else done
*/
ret_val = e1000_flash_cycle_ich8lan(hw,
- ICH_FLASH_WRITE_COMMAND_TIMEOUT);
+ ICH_FLASH_WRITE_COMMAND_TIMEOUT);
if (!ret_val)
break;
* try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
*/
hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.flcerr == 1)
+ if (hsfsts.hsf_status.flcerr)
/* Repeat for some time before giving up. */
continue;
- if (hsfsts.hsf_status.flcdone == 0) {
+ if (!hsfsts.hsf_status.flcdone) {
e_dbg("Timeout error - flash cycle did not complete.\n");
break;
}
flash_linear_addr = hw->nvm.flash_base_addr;
flash_linear_addr += (bank) ? flash_bank_size : 0;
- for (j = 0; j < iteration ; j++) {
+ for (j = 0; j < iteration; j++) {
do {
/* Steps */
ret_val = e1000_flash_cycle_init_ich8lan(hw);
ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
ret_val = e1000_flash_cycle_ich8lan(hw,
- ICH_FLASH_ERASE_COMMAND_TIMEOUT);
+ ICH_FLASH_ERASE_COMMAND_TIMEOUT);
if (!ret_val)
break;
* a few more times else Done
*/
hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.flcerr == 1)
+ if (hsfsts.hsf_status.flcerr)
/* repeat for some time before giving up */
continue;
- else if (hsfsts.hsf_status.flcdone == 0)
+ else if (!hsfsts.hsf_status.flcdone)
return ret_val;
} while (++count < ICH_FLASH_CYCLE_REPEAT_COUNT);
}
return ret_val;
}
- if (*data == ID_LED_RESERVED_0000 ||
- *data == ID_LED_RESERVED_FFFF)
+ if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF)
*data = ID_LED_DEFAULT_ICH8LAN;
return 0;
*
* PCH also does not have an "always on" or "always off" mode which
* complicates the ID feature. Instead of using the "on" mode to indicate
- * in ledctl_mode2 the LEDs to use for ID (see e1000e_id_led_init()),
+ * in ledctl_mode2 the LEDs to use for ID (see e1000e_id_led_init_generic()),
* use "link_up" mode. The LEDs will still ID on request if there is no
* link based on logic in e1000_led_[on|off]_pchlan().
**/
static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
{
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
- u16 reg;
- u32 ctrl, kab;
+ u16 kum_cfg;
+ u32 ctrl, reg;
s32 ret_val;
/*
}
if (hw->mac.type == e1000_pchlan) {
- /* Save the NVM K1 bit setting*/
- ret_val = e1000_read_nvm(hw, E1000_NVM_K1_CONFIG, 1, ®);
+ /* Save the NVM K1 bit setting */
+ ret_val = e1000_read_nvm(hw, E1000_NVM_K1_CONFIG, 1, &kum_cfg);
if (ret_val)
return ret_val;
- if (reg & E1000_NVM_K1_ENABLE)
+ if (kum_cfg & E1000_NVM_K1_ENABLE)
dev_spec->nvm_k1_enabled = true;
else
dev_spec->nvm_k1_enabled = false;
ctrl = er32(CTRL);
- if (!e1000_check_reset_block(hw)) {
+ if (!hw->phy.ops.check_reset_block(hw)) {
/*
* Full-chip reset requires MAC and PHY reset at the same
* time to make sure the interface between MAC and the
/* cannot issue a flush here because it hangs the hardware */
msleep(20);
+ /* Set Phy Config Counter to 50msec */
+ if (hw->mac.type == e1000_pch2lan) {
+ reg = er32(FEXTNVM3);
+ reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK;
+ reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
+ ew32(FEXTNVM3, reg);
+ }
+
if (!ret_val)
clear_bit(__E1000_ACCESS_SHARED_RESOURCE, &hw->adapter->state);
ew32(IMC, 0xffffffff);
er32(ICR);
- kab = er32(KABGTXD);
- kab |= E1000_KABGTXD_BGSQLBIAS;
- ew32(KABGTXD, kab);
+ reg = er32(KABGTXD);
+ reg |= E1000_KABGTXD_BGSQLBIAS;
+ ew32(KABGTXD, reg);
return 0;
}
ret_val = mac->ops.id_led_init(hw);
if (ret_val)
e_dbg("Error initializing identification LED\n");
- /* This is not fatal and we should not stop init due to this */
+ /* This is not fatal and we should not stop init due to this */
/* Setup the receive address. */
e1000e_init_rx_addrs(hw, mac->rar_entry_count);
}
/* Setup link and flow control */
- ret_val = e1000_setup_link_ich8lan(hw);
+ ret_val = mac->ops.setup_link(hw);
/* Set the transmit descriptor write-back policy for both queues */
txdctl = er32(TXDCTL(0));
txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB;
+ E1000_TXDCTL_FULL_TX_DESC_WB;
txdctl = (txdctl & ~E1000_TXDCTL_PTHRESH) |
- E1000_TXDCTL_MAX_TX_DESC_PREFETCH;
+ E1000_TXDCTL_MAX_TX_DESC_PREFETCH;
ew32(TXDCTL(0), txdctl);
txdctl = er32(TXDCTL(1));
txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB;
+ E1000_TXDCTL_FULL_TX_DESC_WB;
txdctl = (txdctl & ~E1000_TXDCTL_PTHRESH) |
- E1000_TXDCTL_MAX_TX_DESC_PREFETCH;
+ E1000_TXDCTL_MAX_TX_DESC_PREFETCH;
ew32(TXDCTL(1), txdctl);
/*
if (mac->type == e1000_ich8lan)
snoop = PCIE_ICH8_SNOOP_ALL;
else
- snoop = (u32) ~(PCIE_NO_SNOOP_ALL);
+ snoop = (u32)~(PCIE_NO_SNOOP_ALL);
e1000e_set_pcie_no_snoop(hw, snoop);
ctrl_ext = er32(CTRL_EXT);
return ret_val;
}
+
/**
* e1000_initialize_hw_bits_ich8lan - Initialize required hardware bits
* @hw: pointer to the HW structure
*/
reg = er32(RFCTL);
reg |= (E1000_RFCTL_NFSW_DIS | E1000_RFCTL_NFSR_DIS);
+ /*
+ * Disable IPv6 extension header parsing because some malformed
+ * IPv6 headers can hang the Rx.
+ */
+ if (hw->mac.type == e1000_ich8lan)
+ reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS);
ew32(RFCTL, reg);
}
{
s32 ret_val;
- if (e1000_check_reset_block(hw))
+ if (hw->phy.ops.check_reset_block(hw))
return 0;
/*
*/
hw->fc.current_mode = hw->fc.requested_mode;
- e_dbg("After fix-ups FlowControl is now = %x\n",
- hw->fc.current_mode);
+ e_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode);
/* Continue to configure the copper link. */
- ret_val = e1000_setup_copper_link_ich8lan(hw);
+ ret_val = hw->mac.ops.setup_physical_interface(hw);
if (ret_val)
return ret_val;
ew32(FCTTV, hw->fc.pause_time);
if ((hw->phy.type == e1000_phy_82578) ||
(hw->phy.type == e1000_phy_82579) ||
+ (hw->phy.type == e1000_phy_i217) ||
(hw->phy.type == e1000_phy_82577)) {
ew32(FCRTV_PCH, hw->fc.refresh_time);
- ret_val = e1e_wphy(hw, PHY_REG(BM_PORT_CTRL_PAGE, 27),
+ ret_val = e1e_wphy(hw,
+ PHY_REG(BM_PORT_CTRL_PAGE, 27),
hw->fc.pause_time);
if (ret_val)
return ret_val;
ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_TIMEOUTS, 0xFFFF);
if (ret_val)
return ret_val;
- ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
- ®_data);
+ ret_val = e1000e_read_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_INBAND_PARAM,
+ ®_data);
if (ret_val)
return ret_val;
reg_data |= 0x3F;
- ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
- reg_data);
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_INBAND_PARAM,
+ reg_data);
if (ret_val)
return ret_val;
break;
case e1000_phy_82577:
case e1000_phy_82579:
+ case e1000_phy_i217:
ret_val = e1000_copper_link_setup_82577(hw);
if (ret_val)
return ret_val;
return ret_val;
if ((hw->mac.type == e1000_ich8lan) &&
- (hw->phy.type == e1000_phy_igp_3) &&
- (*speed == SPEED_1000)) {
+ (hw->phy.type == e1000_phy_igp_3) && (*speed == SPEED_1000)) {
ret_val = e1000_kmrn_lock_loss_workaround_ich8lan(hw);
}
}
/**
- * e1000_set_kmrn_lock_loss_workaround_ich8lan - Set Kumeran workaround state
+ * e1000e_set_kmrn_lock_loss_workaround_ich8lan - Set Kumeran workaround state
* @hw: pointer to the HW structure
* @state: boolean value used to set the current Kumeran workaround state
*
* /disabled - false).
**/
void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
- bool state)
+ bool state)
{
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
{
u32 reg;
u16 data;
- u8 retry = 0;
+ u8 retry = 0;
if (hw->phy.type != e1000_phy_igp_3)
return;
return;
ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
- ®_data);
+ ®_data);
if (ret_val)
return;
reg_data |= E1000_KMRNCTRLSTA_DIAG_NELPBK;
- ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
- reg_data);
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_DIAG_OFFSET,
+ reg_data);
if (ret_val)
return;
reg_data &= ~E1000_KMRNCTRLSTA_DIAG_NELPBK;
- ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
- reg_data);
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_DIAG_OFFSET,
+ reg_data);
}
/**
* the LPLU setting in the NVM or custom setting. For PCH and newer parts,
* the OEM bits PHY register (LED, GbE disable and LPLU configurations) also
* needs to be written.
+ * Parts that support (and are linked to a partner which support) EEE in
+ * 100Mbps should disable LPLU since 100Mbps w/ EEE requires less power
+ * than 10Mbps w/o EEE.
**/
void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
{
+ struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
u32 phy_ctrl;
s32 ret_val;
phy_ctrl = er32(PHY_CTRL);
phy_ctrl |= E1000_PHY_CTRL_GBE_DISABLE;
+ if (hw->phy.type == e1000_phy_i217) {
+ u16 phy_reg;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ if (!dev_spec->eee_disable) {
+ u16 eee_advert;
+
+ ret_val = hw->phy.ops.write_reg_locked(hw,
+ I82579_EMI_ADDR,
+ I217_EEE_ADVERTISEMENT);
+ if (ret_val)
+ goto release;
+ hw->phy.ops.read_reg_locked(hw, I82579_EMI_DATA,
+ &eee_advert);
+
+ /*
+ * Disable LPLU if both link partners support 100BaseT
+ * EEE and 100Full is advertised on both ends of the
+ * link.
+ */
+ if ((eee_advert & I217_EEE_100_SUPPORTED) &&
+ (dev_spec->eee_lp_ability &
+ I217_EEE_100_SUPPORTED) &&
+ (hw->phy.autoneg_advertised & ADVERTISE_100_FULL))
+ phy_ctrl &= ~(E1000_PHY_CTRL_D0A_LPLU |
+ E1000_PHY_CTRL_NOND0A_LPLU);
+ }
+
+ /*
+ * For i217 Intel Rapid Start Technology support,
+ * when the system is going into Sx and no manageability engine
+ * is present, the driver must configure proxy to reset only on
+ * power good. LPI (Low Power Idle) state must also reset only
+ * on power good, as well as the MTA (Multicast table array).
+ * The SMBus release must also be disabled on LCD reset.
+ */
+ if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
+
+ /* Enable proxy to reset only on power good. */
+ hw->phy.ops.read_reg_locked(hw, I217_PROXY_CTRL,
+ &phy_reg);
+ phy_reg |= I217_PROXY_CTRL_AUTO_DISABLE;
+ hw->phy.ops.write_reg_locked(hw, I217_PROXY_CTRL,
+ phy_reg);
+
+ /*
+ * Set bit enable LPI (EEE) to reset only on
+ * power good.
+ */
+ hw->phy.ops.read_reg_locked(hw, I217_SxCTRL, &phy_reg);
+ phy_reg |= I217_SxCTRL_MASK;
+ hw->phy.ops.write_reg_locked(hw, I217_SxCTRL, phy_reg);
+
+ /* Disable the SMB release on LCD reset. */
+ hw->phy.ops.read_reg_locked(hw, I217_MEMPWR, &phy_reg);
+ phy_reg &= ~I217_MEMPWR;
+ hw->phy.ops.write_reg_locked(hw, I217_MEMPWR, phy_reg);
+ }
+
+ /*
+ * Enable MTA to reset for Intel Rapid Start Technology
+ * Support
+ */
+ hw->phy.ops.read_reg_locked(hw, I217_CGFREG, &phy_reg);
+ phy_reg |= I217_CGFREG_MASK;
+ hw->phy.ops.write_reg_locked(hw, I217_CGFREG, phy_reg);
+
+release:
+ hw->phy.ops.release(hw);
+ }
+out:
ew32(PHY_CTRL, phy_ctrl);
if (hw->mac.type == e1000_ich8lan)
* on which PHY resets are not blocked, if the PHY registers cannot be
* accessed properly by the s/w toggle the LANPHYPC value to power cycle
* the PHY.
+ * On i217, setup Intel Rapid Start Technology.
**/
void e1000_resume_workarounds_pchlan(struct e1000_hw *hw)
{
- u16 phy_id1, phy_id2;
s32 ret_val;
- if ((hw->mac.type != e1000_pch2lan) || e1000_check_reset_block(hw))
+ if (hw->mac.type < e1000_pch2lan)
return;
- ret_val = hw->phy.ops.acquire(hw);
+ ret_val = e1000_init_phy_workarounds_pchlan(hw);
if (ret_val) {
- e_dbg("Failed to acquire PHY semaphore in resume\n");
+ e_dbg("Failed to init PHY flow ret_val=%d\n", ret_val);
return;
}
- /* Test access to the PHY registers by reading the ID regs */
- ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID1, &phy_id1);
- if (ret_val)
- goto release;
- ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID2, &phy_id2);
- if (ret_val)
- goto release;
-
- if (hw->phy.id == ((u32)(phy_id1 << 16) |
- (u32)(phy_id2 & PHY_REVISION_MASK)))
- goto release;
+ /*
+ * For i217 Intel Rapid Start Technology support when the system
+ * is transitioning from Sx and no manageability engine is present
+ * configure SMBus to restore on reset, disable proxy, and enable
+ * the reset on MTA (Multicast table array).
+ */
+ if (hw->phy.type == e1000_phy_i217) {
+ u16 phy_reg;
- e1000_toggle_lanphypc_value_ich8lan(hw);
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val) {
+ e_dbg("Failed to setup iRST\n");
+ return;
+ }
- hw->phy.ops.release(hw);
- msleep(50);
- e1000_phy_hw_reset(hw);
- msleep(50);
- return;
+ if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
+ /*
+ * Restore clear on SMB if no manageability engine
+ * is present
+ */
+ ret_val = hw->phy.ops.read_reg_locked(hw, I217_MEMPWR,
+ &phy_reg);
+ if (ret_val)
+ goto release;
+ phy_reg |= I217_MEMPWR_MASK;
+ hw->phy.ops.write_reg_locked(hw, I217_MEMPWR, phy_reg);
+ /* Disable Proxy */
+ hw->phy.ops.write_reg_locked(hw, I217_PROXY_CTRL, 0);
+ }
+ /* Enable reset on MTA */
+ ret_val = hw->phy.ops.read_reg_locked(hw, I217_CGFREG,
+ &phy_reg);
+ if (ret_val)
+ goto release;
+ phy_reg &= ~I217_CGFREG_MASK;
+ hw->phy.ops.write_reg_locked(hw, I217_CGFREG, phy_reg);
release:
- hw->phy.ops.release(hw);
+ if (ret_val)
+ e_dbg("Error %d in resume workarounds\n", ret_val);
+ hw->phy.ops.release(hw);
+ }
}
/**
/* If EEPROM is not marked present, init the IGP 3 PHY manually */
if (hw->mac.type <= e1000_ich9lan) {
- if (((er32(EECD) & E1000_EECD_PRES) == 0) &&
+ if (!(er32(EECD) & E1000_EECD_PRES) &&
(hw->phy.type == e1000_phy_igp_3)) {
e1000e_phy_init_script_igp3(hw);
}
/* Clear PHY statistics registers */
if ((hw->phy.type == e1000_phy_82578) ||
(hw->phy.type == e1000_phy_82579) ||
+ (hw->phy.type == e1000_phy_i217) ||
(hw->phy.type == e1000_phy_82577)) {
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
hw->phy.ops.release(hw);
}
}
-
-static struct e1000_mac_operations ich8_mac_ops = {
- .id_led_init = e1000e_id_led_init,
- /* check_mng_mode dependent on mac type */
- .check_for_link = e1000_check_for_copper_link_ich8lan,
- /* cleanup_led dependent on mac type */
- .clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan,
- .get_bus_info = e1000_get_bus_info_ich8lan,
- .set_lan_id = e1000_set_lan_id_single_port,
- .get_link_up_info = e1000_get_link_up_info_ich8lan,
- /* led_on dependent on mac type */
- /* led_off dependent on mac type */
- .update_mc_addr_list = e1000e_update_mc_addr_list_generic,
- .reset_hw = e1000_reset_hw_ich8lan,
- .init_hw = e1000_init_hw_ich8lan,
- .setup_link = e1000_setup_link_ich8lan,
- .setup_physical_interface= e1000_setup_copper_link_ich8lan,
- /* id_led_init dependent on mac type */
-};
-
-static struct e1000_phy_operations ich8_phy_ops = {
- .acquire = e1000_acquire_swflag_ich8lan,
- .check_reset_block = e1000_check_reset_block_ich8lan,
- .commit = NULL,
- .get_cfg_done = e1000_get_cfg_done_ich8lan,
- .get_cable_length = e1000e_get_cable_length_igp_2,
- .read_reg = e1000e_read_phy_reg_igp,
- .release = e1000_release_swflag_ich8lan,
- .reset = e1000_phy_hw_reset_ich8lan,
- .set_d0_lplu_state = e1000_set_d0_lplu_state_ich8lan,
- .set_d3_lplu_state = e1000_set_d3_lplu_state_ich8lan,
- .write_reg = e1000e_write_phy_reg_igp,
-};
-
-static struct e1000_nvm_operations ich8_nvm_ops = {
- .acquire = e1000_acquire_nvm_ich8lan,
- .read = e1000_read_nvm_ich8lan,
- .release = e1000_release_nvm_ich8lan,
- .update = e1000_update_nvm_checksum_ich8lan,
- .valid_led_default = e1000_valid_led_default_ich8lan,
- .validate = e1000_validate_nvm_checksum_ich8lan,
- .write = e1000_write_nvm_ich8lan,
-};
-
-struct e1000_info e1000_ich8_info = {
- .mac = e1000_ich8lan,
- .flags = FLAG_HAS_WOL
- | FLAG_IS_ICH
- | FLAG_HAS_CTRLEXT_ON_LOAD
- | FLAG_HAS_AMT
- | FLAG_HAS_FLASH
- | FLAG_APME_IN_WUC,
- .pba = 8,
- .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN,
- .get_variants = e1000_get_variants_ich8lan,
- .mac_ops = &ich8_mac_ops,
- .phy_ops = &ich8_phy_ops,
- .nvm_ops = &ich8_nvm_ops,
-};
-
-struct e1000_info e1000_ich9_info = {
- .mac = e1000_ich9lan,
- .flags = FLAG_HAS_JUMBO_FRAMES
- | FLAG_IS_ICH
- | FLAG_HAS_WOL
- | FLAG_HAS_CTRLEXT_ON_LOAD
- | FLAG_HAS_AMT
- | FLAG_HAS_FLASH
- | FLAG_APME_IN_WUC,
- .pba = 18,
- .max_hw_frame_size = DEFAULT_JUMBO,
- .get_variants = e1000_get_variants_ich8lan,
- .mac_ops = &ich8_mac_ops,
- .phy_ops = &ich8_phy_ops,
- .nvm_ops = &ich8_nvm_ops,
-};
-
-struct e1000_info e1000_ich10_info = {
- .mac = e1000_ich10lan,
- .flags = FLAG_HAS_JUMBO_FRAMES
- | FLAG_IS_ICH
- | FLAG_HAS_WOL
- | FLAG_HAS_CTRLEXT_ON_LOAD
- | FLAG_HAS_AMT
- | FLAG_HAS_FLASH
- | FLAG_APME_IN_WUC,
- .pba = 18,
- .max_hw_frame_size = DEFAULT_JUMBO,
- .get_variants = e1000_get_variants_ich8lan,
- .mac_ops = &ich8_mac_ops,
- .phy_ops = &ich8_phy_ops,
- .nvm_ops = &ich8_nvm_ops,
-};
-
-struct e1000_info e1000_pch_info = {
- .mac = e1000_pchlan,
- .flags = FLAG_IS_ICH
- | FLAG_HAS_WOL
- | FLAG_HAS_CTRLEXT_ON_LOAD
- | FLAG_HAS_AMT
- | FLAG_HAS_FLASH
- | FLAG_HAS_JUMBO_FRAMES
- | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
- | FLAG_APME_IN_WUC,
- .flags2 = FLAG2_HAS_PHY_STATS,
- .pba = 26,
- .max_hw_frame_size = 4096,
- .get_variants = e1000_get_variants_ich8lan,
- .mac_ops = &ich8_mac_ops,
- .phy_ops = &ich8_phy_ops,
- .nvm_ops = &ich8_nvm_ops,
-};
-
-struct e1000_info e1000_pch2_info = {
- .mac = e1000_pch2lan,
- .flags = FLAG_IS_ICH
- | FLAG_HAS_WOL
- | FLAG_HAS_CTRLEXT_ON_LOAD
- | FLAG_HAS_AMT
- | FLAG_HAS_FLASH
- | FLAG_HAS_JUMBO_FRAMES
- | FLAG_APME_IN_WUC,
- .flags2 = FLAG2_HAS_PHY_STATS
- | FLAG2_HAS_EEE,
- .pba = 26,
- .max_hw_frame_size = DEFAULT_JUMBO,
- .get_variants = e1000_get_variants_ich8lan,
- .mac_ops = &ich8_mac_ops,
- .phy_ops = &ich8_phy_ops,
- .nvm_ops = &ich8_nvm_ops,
-};
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2012 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_ICH8LAN_H_
+#define _E1000_ICH8LAN_H_
+
+#define ICH_FLASH_GFPREG 0x0000
+#define ICH_FLASH_HSFSTS 0x0004
+#define ICH_FLASH_HSFCTL 0x0006
+#define ICH_FLASH_FADDR 0x0008
+#define ICH_FLASH_FDATA0 0x0010
+
+/* Requires up to 10 seconds when MNG might be accessing part. */
+#define ICH_FLASH_READ_COMMAND_TIMEOUT 10000000
+#define ICH_FLASH_WRITE_COMMAND_TIMEOUT 10000000
+#define ICH_FLASH_ERASE_COMMAND_TIMEOUT 10000000
+#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
+#define ICH_FLASH_CYCLE_REPEAT_COUNT 10
+
+#define ICH_CYCLE_READ 0
+#define ICH_CYCLE_WRITE 2
+#define ICH_CYCLE_ERASE 3
+
+#define FLASH_GFPREG_BASE_MASK 0x1FFF
+#define FLASH_SECTOR_ADDR_SHIFT 12
+
+#define ICH_FLASH_SEG_SIZE_256 256
+#define ICH_FLASH_SEG_SIZE_4K 4096
+#define ICH_FLASH_SEG_SIZE_8K 8192
+#define ICH_FLASH_SEG_SIZE_64K 65536
+#define ICH_FLASH_SECTOR_SIZE 4096
+
+#define ICH_FLASH_REG_MAPSIZE 0x00A0
+
+#define E1000_ICH_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI Reset */
+#define E1000_ICH_FWSM_DISSW 0x10000000 /* FW Disables SW Writes */
+/* FW established a valid mode */
+#define E1000_ICH_FWSM_FW_VALID 0x00008000
+#define E1000_ICH_FWSM_PCIM2PCI 0x01000000 /* ME PCIm-to-PCI active */
+#define E1000_ICH_FWSM_PCIM2PCI_COUNT 2000
+
+#define E1000_ICH_MNG_IAMT_MODE 0x2
+
+#define E1000_FWSM_PROXY_MODE 0x00000008 /* FW is in proxy mode */
+#define E1000_FWSM_MEMC 0x00000010 /* ME Messaging capable */
+#define E1000_FWSM_WLOCK_MAC_MASK 0x0380
+#define E1000_FWSM_WLOCK_MAC_SHIFT 7
+
+/* Shared Receive Address Registers */
+#define E1000_SHRAL(_i) (0x05438 + ((_i) * 8))
+#define E1000_SHRAH(_i) (0x0543C + ((_i) * 8))
+#define E1000_SHRAH_AV 0x80000000 /* Addr Valid bit */
+#define E1000_SHRAH_MAV 0x40000000 /* Multicast Addr Valid bit */
+
+#define E1000_SHRAL_PCH_LPT(_i) (0x05408 + ((_i) * 8))
+#define E1000_SHRAH_PCH_LPT(_i) (0x0540C + ((_i) * 8))
+
+#define E1000_H2ME 0x05B50 /* Host to ME */
+#define E1000_H2ME_LSECREQ 0x00000001 /* Linksec Request */
+#define E1000_H2ME_LSECA 0x00000002 /* Linksec Active */
+#define E1000_H2ME_LSECSF 0x00000004 /* Linksec Failed */
+#define E1000_H2ME_LSECD 0x00000008 /* Linksec Disabled */
+#define E1000_H2ME_SLCAPD 0x00000010 /* Start LCAPD */
+#define E1000_H2ME_IPV4_ARP_EN 0x00000020 /* Arp Offload enable bit */
+#define E1000_H2ME_IPV6_NS_EN 0x00000040 /* NS Offload enable bit */
+
+#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \
+ (ID_LED_OFF1_OFF2 << 8) | \
+ (ID_LED_OFF1_ON2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+
+#define E1000_ICH_NVM_SIG_WORD 0x13
+#define E1000_ICH_NVM_SIG_MASK 0xC000
+#define E1000_ICH_NVM_VALID_SIG_MASK 0xC0
+#define E1000_ICH_NVM_SIG_VALUE 0x80
+
+#define E1000_ICH8_LAN_INIT_TIMEOUT 1500
+
+#define E1000_FEXTNVM_SW_CONFIG 1
+#define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* Bit redefined for ICH8M */
+
+#define E1000_FEXTNVM3 0x0003C /* Future Extended NVM 3 - RW */
+#define E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK 0x0C000000
+#define E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC 0x08000000
+
+#define E1000_FEXTNVM4_BEACON_DURATION_MASK 0x7
+#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7
+#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3
+
+#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL
+
+#define E1000_ICH_RAR_ENTRIES 7
+#define E1000_PCH2_RAR_ENTRIES 5 /* RAR[0], SHRA[0-3] */
+#define E1000_PCH_LPT_RAR_ENTRIES 12 /* RAR[0], SHRA[0-10] */
+
+#define PHY_PAGE_SHIFT 5
+#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
+ ((reg) & MAX_PHY_REG_ADDRESS))
+#define IGP3_KMRN_DIAG PHY_REG(770, 19) /* KMRN Diagnostic */
+#define IGP3_VR_CTRL PHY_REG(776, 18) /* Voltage Regulator Control */
+#define IGP3_CAPABILITY PHY_REG(776, 19) /* Capability */
+#define IGP3_PM_CTRL PHY_REG(769, 20) /* Power Management Control */
+
+#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002
+#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300
+#define IGP3_VR_CTRL_MODE_SHUTDOWN 0x0200
+#define IGP3_PM_CTRL_FORCE_PWR_DOWN 0x0020
+
+/* PHY Wakeup Registers and defines */
+#define BM_PORT_GEN_CFG PHY_REG(BM_PORT_CTRL_PAGE, 17)
+#define BM_RCTL PHY_REG(BM_WUC_PAGE, 0)
+#define BM_WUC PHY_REG(BM_WUC_PAGE, 1)
+#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2)
+#define BM_WUS PHY_REG(BM_WUC_PAGE, 3)
+#define BM_RAR_L(_i) (BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2)))
+#define BM_RAR_M(_i) (BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2)))
+#define BM_RAR_H(_i) (BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2)))
+#define BM_RAR_CTRL(_i) (BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2)))
+#define BM_MTA(_i) (BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1)))
+#define BM_IPAV (BM_PHY_REG(BM_WUC_PAGE, 64))
+#define BM_IP4AT_L(_i) (BM_PHY_REG(BM_WUC_PAGE, 82 + ((_i) * 2)))
+#define BM_IP4AT_H(_i) (BM_PHY_REG(BM_WUC_PAGE, 83 + ((_i) * 2)))
+
+#define BM_SHRAL_LOWER(_i) (BM_PHY_REG(BM_WUC_PAGE, 44 + ((_i) * 4)))
+#define BM_SHRAL_UPPER(_i) (BM_PHY_REG(BM_WUC_PAGE, 45 + ((_i) * 4)))
+#define BM_SHRAH_LOWER(_i) (BM_PHY_REG(BM_WUC_PAGE, 46 + ((_i) * 4)))
+#define BM_SHRAH_UPPER(_i) (BM_PHY_REG(BM_WUC_PAGE, 47 + ((_i) * 4)))
+
+#define I217_SHRAL_LOWER(_i) (BM_PHY_REG(BM_WUC_PAGE, 20 + ((_i) * 4)))
+#define I217_SHRAL_UPPER(_i) (BM_PHY_REG(BM_WUC_PAGE, 21 + ((_i) * 4)))
+#define I217_SHRAH_LOWER(_i) (BM_PHY_REG(BM_WUC_PAGE, 22 + ((_i) * 4)))
+#define I217_SHRAH_UPPER(_i) (BM_PHY_REG(BM_WUC_PAGE, 23 + ((_i) * 4)))
+
+#define BM_RCTL_UPE 0x0001 /* Unicast Promiscuous Mode */
+#define BM_RCTL_MPE 0x0002 /* Multicast Promiscuous Mode */
+#define BM_RCTL_MO_SHIFT 3 /* Multicast Offset Shift */
+#define BM_RCTL_MO_MASK (3 << 3) /* Multicast Offset Mask */
+#define BM_RCTL_BAM 0x0020 /* Broadcast Accept Mode */
+#define BM_RCTL_PMCF 0x0040 /* Pass MAC Control Frames */
+#define BM_RCTL_RFCE 0x0080 /* Rx Flow Control Enable */
+
+#define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */
+#define HV_MUX_DATA_CTRL PHY_REG(776, 16)
+#define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400
+#define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004
+#define HV_STATS_PAGE 778
+#define HV_SCC_UPPER PHY_REG(HV_STATS_PAGE, 16) /* Single Collision Count */
+#define HV_SCC_LOWER PHY_REG(HV_STATS_PAGE, 17)
+#define HV_ECOL_UPPER PHY_REG(HV_STATS_PAGE, 18) /* Excessive Coll. Count */
+#define HV_ECOL_LOWER PHY_REG(HV_STATS_PAGE, 19)
+#define HV_MCC_UPPER PHY_REG(HV_STATS_PAGE, 20) /* Multiple Coll. Count */
+#define HV_MCC_LOWER PHY_REG(HV_STATS_PAGE, 21)
+#define HV_LATECOL_UPPER PHY_REG(HV_STATS_PAGE, 23) /* Late Collision Count */
+#define HV_LATECOL_LOWER PHY_REG(HV_STATS_PAGE, 24)
+#define HV_COLC_UPPER PHY_REG(HV_STATS_PAGE, 25) /* Collision Count */
+#define HV_COLC_LOWER PHY_REG(HV_STATS_PAGE, 26)
+#define HV_DC_UPPER PHY_REG(HV_STATS_PAGE, 27) /* Defer Count */
+#define HV_DC_LOWER PHY_REG(HV_STATS_PAGE, 28)
+#define HV_TNCRS_UPPER PHY_REG(HV_STATS_PAGE, 29) /* Transmit with no CRS */
+#define HV_TNCRS_LOWER PHY_REG(HV_STATS_PAGE, 30)
+
+#define E1000_FCRTV_PCH 0x05F40 /* PCH Flow Control Refresh Timer Value */
+
+/*
+ * For ICH, the name used for NVM word 17h is LED1 Config.
+ * For PCH, the word was re-named to OEM Config.
+ */
+#define E1000_NVM_LED1_CONFIG 0x17 /* NVM LED1/LPLU Config Word */
+#define E1000_NVM_LED1_CONFIG_LPLU_NONDOA 0x0400 /* NVM LPLU in non-D0a Bit */
+#define E1000_NVM_OEM_CONFIG E1000_NVM_LED1_CONFIG
+#define E1000_NVM_OEM_CONFIG_LPLU_NONDOA E1000_NVM_LED1_CONFIG_LPLU_NONDOA
+
+#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */
+#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */
+
+/* SMBus Control Phy Register */
+#define CV_SMB_CTRL PHY_REG(769, 23)
+#define CV_SMB_CTRL_FORCE_SMBUS 0x0001
+
+/* SMBus Address Phy Register */
+#define HV_SMB_ADDR PHY_REG(768, 26)
+#define HV_SMB_ADDR_MASK 0x007F
+#define HV_SMB_ADDR_PEC_EN 0x0200
+#define HV_SMB_ADDR_VALID 0x0080
+#define HV_SMB_ADDR_FREQ_MASK 0x1100
+#define HV_SMB_ADDR_FREQ_LOW_SHIFT 8
+#define HV_SMB_ADDR_FREQ_HIGH_SHIFT 12
+
+/* Strapping Option Register - RO */
+#define E1000_STRAP 0x0000C
+#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000
+#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17
+#define E1000_STRAP_SMT_FREQ_MASK 0x00003000
+#define E1000_STRAP_SMT_FREQ_SHIFT 12
+
+/* OEM Bits Phy Register */
+#define HV_OEM_BITS PHY_REG(768, 25)
+#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */
+#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */
+#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */
+
+#define LCD_CFG_PHY_ADDR_BIT 0x0020 /* Phy addr bit from LCD Config word */
+
+/* KMRN Mode Control */
+#define HV_KMRN_MODE_CTRL PHY_REG(769, 16)
+#define HV_KMRN_MDIO_SLOW 0x0400
+
+/* KMRN FIFO Control and Status */
+#define HV_KMRN_FIFO_CTRLSTA PHY_REG(770, 16)
+#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK 0x7000
+#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT 12
+
+/* PHY Power Management Control */
+#define HV_PM_CTRL PHY_REG(770, 17)
+#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100
+#define I217_MEM_PM_CFG PHY_REG(772, 27) /* I217 PHY Mem PM Cfg Reg */
+#define I217_MEM_PM_CFG_TXF_SD 0x0020 /* Tx FIFO Memories Shutdown */
+
+#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in ms */
+
+/* PHY Low Power Idle Control */
+#define I82579_LPI_CTRL PHY_REG(772, 20)
+#define I82579_LPI_CTRL_ENABLE_MASK 0x6000
+#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80
+
+/* EMI Registers */
+#define I82579_EMI_ADDR 0x10
+#define I82579_EMI_DATA 0x11
+#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */
+#define I82579_MSE_THRESHOLD 0x084F /* Mean Square Error Threshold */
+#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */
+#define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */
+#define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */
+#define I217_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE supported */
+
+/* Intel Rapid Start Technology Support */
+#define I217_PROXY_CTRL PHY_REG(BM_WUC_PAGE, 70)
+#define I217_PROXY_CTRL_AUTO_DISABLE 0x0080
+#define I217_SxCTRL PHY_REG(BM_PORT_CTRL_PAGE, 28)
+#define I217_SxCTRL_MASK 0x1000
+#define I217_CGFREG PHY_REG(772, 29)
+#define I217_CGFREG_MASK 0x0002
+#define I217_MEMPWR PHY_REG(772, 26)
+#define I217_MEMPWR_MASK 0x0010
+
+/*
+ * Additional interrupts need to be handled for ICH family:
+ * DSW = The FW changed the status of the DISSW bit in FWSM
+ * PHYINT = The LAN connected device generates an interrupt
+ * EPRST = Manageability reset event
+ */
+#define IMS_ICH_ENABLE_MASK (\
+ E1000_IMS_DSW | \
+ E1000_IMS_PHYINT | \
+ E1000_IMS_EPRST)
+
+/* Additional interrupt register bit definitions */
+#define E1000_ICR_LSECPNC 0x00004000 /* PN threshold - client */
+#define E1000_IMS_LSECPNC E1000_ICR_LSECPNC /* PN threshold - client */
+#define E1000_ICS_LSECPNC E1000_ICR_LSECPNC /* PN threshold - client */
+
+/* Security Processing bit Indication */
+#define E1000_RXDEXT_LINKSEC_STATUS_LSECH 0x01000000
+#define E1000_RXDEXT_LINKSEC_ERROR_BIT_MASK 0x60000000
+#define E1000_RXDEXT_LINKSEC_ERROR_NO_SA_MATCH 0x20000000
+#define E1000_RXDEXT_LINKSEC_ERROR_REPLAY_ERROR 0x40000000
+#define E1000_RXDEXT_LINKSEC_ERROR_BAD_SIG 0x60000000
+
+/* Receive Address Initial CRC Calculation */
+#define E1000_PCH_RAICC(_n) (0x05F50 + ((_n) * 4))
+
+void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
+ bool state);
+void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
+void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
+void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw);
+void e1000_resume_workarounds_pchlan(struct e1000_hw *hw);
+s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
+void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw);
+s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);
+#endif
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2012 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000.h"
+#include "kcompat.h"
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8) )
+/* From lib/vsprintf.c */
+#include <asm/div64.h>
+
+static int skip_atoi(const char **s)
+{
+ int i = 0;
+
+ while (isdigit(**s))
+ i = i * 10 + *((*s)++) - '0';
+ return i;
+}
+
+#define _kc_ZEROPAD 1 /* pad with zero */
+#define _kc_SIGN 2 /* unsigned/signed long */
+#define _kc_PLUS 4 /* show plus */
+#define _kc_SPACE 8 /* space if plus */
+#define _kc_LEFT 16 /* left justified */
+#define _kc_SPECIAL 32 /* 0x */
+#define _kc_LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */
+
+static char *number(char *buf, char *end, long long num, int base, int size,
+ int precision, int type)
+{
+ char c, sign, tmp[66];
+ const char *digits;
+ const char small_digits[] = "0123456789abcdefghijklmnopqrstuvwxyz";
+ const char large_digits[] = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ";
+ int i;
+
+ digits = (type & _kc_LARGE) ? large_digits : small_digits;
+ if (type & _kc_LEFT)
+ type &= ~_kc_ZEROPAD;
+ if (base < 2 || base > 36)
+ return 0;
+ c = (type & _kc_ZEROPAD) ? '0' : ' ';
+ sign = 0;
+ if (type & _kc_SIGN) {
+ if (num < 0) {
+ sign = '-';
+ num = -num;
+ size--;
+ } else if (type & _kc_PLUS) {
+ sign = '+';
+ size--;
+ } else if (type & _kc_SPACE) {
+ sign = ' ';
+ size--;
+ }
+ }
+ if (type & _kc_SPECIAL) {
+ if (base == 16)
+ size -= 2;
+ else if (base == 8)
+ size--;
+ }
+ i = 0;
+ if (num == 0)
+ tmp[i++] = '0';
+ else
+ while (num != 0)
+ tmp[i++] = digits[do_div(num, base)];
+ if (i > precision)
+ precision = i;
+ size -= precision;
+ if (!(type & (_kc_ZEROPAD + _kc_LEFT))) {
+ while (size-- > 0) {
+ if (buf <= end)
+ *buf = ' ';
+ ++buf;
+ }
+ }
+ if (sign) {
+ if (buf <= end)
+ *buf = sign;
+ ++buf;
+ }
+ if (type & _kc_SPECIAL) {
+ if (base == 8) {
+ if (buf <= end)
+ *buf = '0';
+ ++buf;
+ } else if (base == 16) {
+ if (buf <= end)
+ *buf = '0';
+ ++buf;
+ if (buf <= end)
+ *buf = digits[33];
+ ++buf;
+ }
+ }
+ if (!(type & _kc_LEFT)) {
+ while (size-- > 0) {
+ if (buf <= end)
+ *buf = c;
+ ++buf;
+ }
+ }
+ while (i < precision--) {
+ if (buf <= end)
+ *buf = '0';
+ ++buf;
+ }
+ while (i-- > 0) {
+ if (buf <= end)
+ *buf = tmp[i];
+ ++buf;
+ }
+ while (size-- > 0) {
+ if (buf <= end)
+ *buf = ' ';
+ ++buf;
+ }
+ return buf;
+}
+
+int _kc_vsnprintf(char *buf, size_t size, const char *fmt, va_list args)
+{
+ int len;
+ unsigned long long num;
+ int i, base;
+ char *str, *end, c;
+ const char *s;
+
+ int flags; /* flags to number() */
+
+ int field_width; /* width of output field */
+ int precision; /* min. # of digits for integers; max
+ number of chars for from string */
+ int qualifier; /* 'h', 'l', or 'L' for integer fields */
+ /* 'z' support added 23/7/1999 S.H. */
+ /* 'z' changed to 'Z' --davidm 1/25/99 */
+
+ str = buf;
+ end = buf + size - 1;
+
+ if (end < buf - 1) {
+ end = ((void *)-1);
+ size = end - buf + 1;
+ }
+
+ for (; *fmt; ++fmt) {
+ if (*fmt != '%') {
+ if (str <= end)
+ *str = *fmt;
+ ++str;
+ continue;
+ }
+
+ /* process flags */
+ flags = 0;
+repeat:
+ ++fmt; /* this also skips first '%' */
+ switch (*fmt) {
+ case '-':
+ flags |= _kc_LEFT;
+ goto repeat;
+ case '+':
+ flags |= _kc_PLUS;
+ goto repeat;
+ case ' ':
+ flags |= _kc_SPACE;
+ goto repeat;
+ case '#':
+ flags |= _kc_SPECIAL;
+ goto repeat;
+ case '0':
+ flags |= _kc_ZEROPAD;
+ goto repeat;
+ }
+
+ /* get field width */
+ field_width = -1;
+ if (isdigit(*fmt))
+ field_width = skip_atoi(&fmt);
+ else if (*fmt == '*') {
+ ++fmt;
+ /* it's the next argument */
+ field_width = va_arg(args, int);
+ if (field_width < 0) {
+ field_width = -field_width;
+ flags |= _kc_LEFT;
+ }
+ }
+
+ /* get the precision */
+ precision = -1;
+ if (*fmt == '.') {
+ ++fmt;
+ if (isdigit(*fmt))
+ precision = skip_atoi(&fmt);
+ else if (*fmt == '*') {
+ ++fmt;
+ /* it's the next argument */
+ precision = va_arg(args, int);
+ }
+ if (precision < 0)
+ precision = 0;
+ }
+
+ /* get the conversion qualifier */
+ qualifier = -1;
+ if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L' || *fmt == 'Z') {
+ qualifier = *fmt;
+ ++fmt;
+ }
+
+ /* default base */
+ base = 10;
+
+ switch (*fmt) {
+ case 'c':
+ if (!(flags & _kc_LEFT)) {
+ while (--field_width > 0) {
+ if (str <= end)
+ *str = ' ';
+ ++str;
+ }
+ }
+ c = (unsigned char)va_arg(args, int);
+ if (str <= end)
+ *str = c;
+ ++str;
+ while (--field_width > 0) {
+ if (str <= end)
+ *str = ' ';
+ ++str;
+ }
+ continue;
+
+ case 's':
+ s = va_arg(args, char *);
+ if (!s)
+ s = "<NULL>";
+
+ len = strnlen(s, precision);
+
+ if (!(flags & _kc_LEFT)) {
+ while (len < field_width--) {
+ if (str <= end)
+ *str = ' ';
+ ++str;
+ }
+ }
+ for (i = 0; i < len; ++i) {
+ if (str <= end)
+ *str = *s;
+ ++str;
+ ++s;
+ }
+ while (len < field_width--) {
+ if (str <= end)
+ *str = ' ';
+ ++str;
+ }
+ continue;
+
+ case 'p':
+ if (field_width == -1) {
+ field_width = 2 * sizeof(void *);
+ flags |= _kc_ZEROPAD;
+ }
+ str = number(str, end,
+ (unsigned long)va_arg(args, void *),
+ 16, field_width, precision, flags);
+ continue;
+
+ case 'n':
+ /* FIXME:
+ * What does C99 say about the overflow case here? */
+ if (qualifier == 'l') {
+ long *ip = va_arg(args, long *);
+ *ip = (str - buf);
+ } else if (qualifier == 'Z') {
+ size_t *ip = va_arg(args, size_t *);
+ *ip = (str - buf);
+ } else {
+ int *ip = va_arg(args, int *);
+ *ip = (str - buf);
+ }
+ continue;
+
+ case '%':
+ if (str <= end)
+ *str = '%';
+ ++str;
+ continue;
+
+ /* integer number formats - set up the flags and "break" */
+ case 'o':
+ base = 8;
+ break;
+
+ case 'X':
+ flags |= _kc_LARGE;
+ case 'x':
+ base = 16;
+ break;
+
+ case 'd':
+ case 'i':
+ flags |= _kc_SIGN;
+ case 'u':
+ break;
+
+ default:
+ if (str <= end)
+ *str = '%';
+ ++str;
+ if (*fmt) {
+ if (str <= end)
+ *str = *fmt;
+ ++str;
+ } else {
+ --fmt;
+ }
+ continue;
+ }
+ if (qualifier == 'L')
+ num = va_arg(args, long long);
+ else if (qualifier == 'l') {
+ num = va_arg(args, unsigned long);
+ if (flags & _kc_SIGN)
+ num = (signed long)num;
+ } else if (qualifier == 'Z') {
+ num = va_arg(args, size_t);
+ } else if (qualifier == 'h') {
+ num = (unsigned short)va_arg(args, int);
+ if (flags & _kc_SIGN)
+ num = (signed short)num;
+ } else {
+ num = va_arg(args, unsigned int);
+ if (flags & _kc_SIGN)
+ num = (signed int)num;
+ }
+ str = number(str, end, num, base,
+ field_width, precision, flags);
+ }
+ if (str <= end)
+ *str = '\0';
+ else if (size > 0)
+ /* don't write out a null byte if the buf size is zero */
+ *end = '\0';
+ /* the trailing null byte doesn't count towards the total
+ * ++str;
+ */
+ return str - buf;
+}
+
+int _kc_snprintf(char *buf, size_t size, const char *fmt, ...)
+{
+ va_list args;
+ int i;
+
+ va_start(args, fmt);
+ i = _kc_vsnprintf(buf, size, fmt, args);
+ va_end(args);
+ return i;
+}
+#endif /* < 2.4.8 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,13) )
+
+/**************************************/
+/* PCI DMA MAPPING */
+
+#if defined(CONFIG_HIGHMEM)
+
+#ifndef PCI_DRAM_OFFSET
+#define PCI_DRAM_OFFSET 0
+#endif
+
+u64
+_kc_pci_map_page(struct pci_dev *dev, struct page *page, unsigned long offset,
+ size_t size, int direction)
+{
+ return (((u64)(page - mem_map) << PAGE_SHIFT) + offset +
+ PCI_DRAM_OFFSET);
+}
+
+#else /* CONFIG_HIGHMEM */
+
+u64
+_kc_pci_map_page(struct pci_dev *dev, struct page *page, unsigned long offset,
+ size_t size, int direction)
+{
+ return pci_map_single(dev, (void *)page_address(page) + offset, size,
+ direction);
+}
+
+#endif /* CONFIG_HIGHMEM */
+
+void
+_kc_pci_unmap_page(struct pci_dev *dev, u64 dma_addr, size_t size,
+ int direction)
+{
+ return pci_unmap_single(dev, dma_addr, size, direction);
+}
+
+#endif /* 2.4.13 => 2.4.3 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3) )
+
+/**************************************/
+/* PCI DRIVER API */
+
+int _kc_pci_set_dma_mask(struct pci_dev *dev, dma_addr_t mask)
+{
+ if (!pci_dma_supported(dev, mask))
+ return -EIO;
+ dev->dma_mask = mask;
+ return 0;
+}
+
+int _kc_pci_request_regions(struct pci_dev *dev, char *res_name)
+{
+ int i;
+
+ for (i = 0; i < 6; i++) {
+ if (pci_resource_len(dev, i) == 0)
+ continue;
+
+ if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
+ if (!request_region
+ (pci_resource_start(dev, i),
+ pci_resource_len(dev, i), res_name)) {
+ pci_release_regions(dev);
+ return -EBUSY;
+ }
+ } else if (pci_resource_flags(dev, i) & IORESOURCE_MEM) {
+ if (!request_mem_region
+ (pci_resource_start(dev, i),
+ pci_resource_len(dev, i), res_name)) {
+ pci_release_regions(dev);
+ return -EBUSY;
+ }
+ }
+ }
+ return 0;
+}
+
+void _kc_pci_release_regions(struct pci_dev *dev)
+{
+ int i;
+
+ for (i = 0; i < 6; i++) {
+ if (pci_resource_len(dev, i) == 0)
+ continue;
+
+ if (pci_resource_flags(dev, i) & IORESOURCE_IO)
+ release_region(pci_resource_start(dev, i),
+ pci_resource_len(dev, i));
+
+ else if (pci_resource_flags(dev, i) & IORESOURCE_MEM)
+ release_mem_region(pci_resource_start(dev, i),
+ pci_resource_len(dev, i));
+ }
+}
+
+/**************************************/
+/* NETWORK DRIVER API */
+
+struct net_device *_kc_alloc_etherdev(int sizeof_priv)
+{
+ struct net_device *dev;
+ int alloc_size;
+
+ alloc_size = sizeof(*dev) + sizeof_priv + IFNAMSIZ + 31;
+ dev = kzalloc(alloc_size, GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ if (sizeof_priv)
+ dev->priv = (void *)(((unsigned long)(dev + 1) + 31) & ~31);
+ dev->name[0] = '\0';
+ ether_setup(dev);
+
+ return dev;
+}
+
+int _kc_is_valid_ether_addr(u8 *addr)
+{
+ const char zaddr[6] = { 0, };
+
+ return !(addr[0] & 1) && memcmp(addr, zaddr, 6);
+}
+
+#endif /* 2.4.3 => 2.4.0 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6) )
+
+int _kc_pci_set_power_state(struct pci_dev *dev, int state)
+{
+ return 0;
+}
+
+int _kc_pci_enable_wake(struct pci_dev *pdev, u32 state, int enable)
+{
+ return 0;
+}
+
+#endif /* 2.4.6 => 2.4.3 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) )
+void _kc_skb_fill_page_desc(struct sk_buff *skb, int i, struct page *page,
+ int off, int size)
+{
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+ frag->page = page;
+ frag->page_offset = off;
+ frag->size = size;
+ skb_shinfo(skb)->nr_frags = i + 1;
+}
+
+/*
+ * Original Copyright:
+ * find_next_bit.c: fallback find next bit implementation
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ */
+
+/**
+ * find_next_bit - find the next set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+unsigned long find_next_bit(const unsigned long *addr, unsigned long size,
+ unsigned long offset)
+{
+ const unsigned long *p = addr + BITOP_WORD(offset);
+ unsigned long result = offset & ~(BITS_PER_LONG - 1);
+ unsigned long tmp;
+
+ if (offset >= size)
+ return size;
+ size -= result;
+ offset %= BITS_PER_LONG;
+ if (offset) {
+ tmp = *(p++);
+ tmp &= (~0UL << offset);
+ if (size < BITS_PER_LONG)
+ goto found_first;
+ if (tmp)
+ goto found_middle;
+ size -= BITS_PER_LONG;
+ result += BITS_PER_LONG;
+ }
+ while (size & ~(BITS_PER_LONG - 1)) {
+ if ((tmp = *(p++)))
+ goto found_middle;
+ result += BITS_PER_LONG;
+ size -= BITS_PER_LONG;
+ }
+ if (!size)
+ return result;
+ tmp = *p;
+
+found_first:
+ tmp &= (~0UL >> (BITS_PER_LONG - size));
+ if (tmp == 0UL) /* Are any bits set? */
+ return result + size; /* Nope. */
+found_middle:
+ return result + ffs(tmp);
+}
+
+size_t _kc_strlcpy(char *dest, const char *src, size_t size)
+{
+ size_t ret = strlen(src);
+
+ if (size) {
+ size_t len = (ret >= size) ? size - 1 : ret;
+ memcpy(dest, src, len);
+ dest[len] = '\0';
+ }
+ return ret;
+}
+
+#endif /* 2.6.0 => 2.4.6 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) )
+int _kc_scnprintf(char *buf, size_t size, const char *fmt, ...)
+{
+ va_list args;
+ int i;
+
+ va_start(args, fmt);
+ i = vsnprintf(buf, size, fmt, args);
+ va_end(args);
+ return (i >= size) ? (size - 1) : i;
+}
+#endif /* < 2.6.4 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) )
+DECLARE_BITMAP(_kcompat_node_online_map, MAX_NUMNODES) = {
+1};
+#endif /* < 2.6.10 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13) )
+char *_kc_kstrdup(const char *s, unsigned int gfp)
+{
+ size_t len;
+ char *buf;
+
+ if (!s)
+ return NULL;
+
+ len = strlen(s) + 1;
+ buf = kmalloc(len, gfp);
+ if (buf)
+ memcpy(buf, s, len);
+ return buf;
+}
+#endif /* < 2.6.13 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14) )
+void *_kc_kzalloc(size_t size, int flags)
+{
+ void *ret = kmalloc(size, flags);
+ if (ret)
+ memset(ret, 0, size);
+ return ret;
+}
+#endif /* <= 2.6.13 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) )
+int _kc_skb_pad(struct sk_buff *skb, int pad)
+{
+ int ntail;
+
+ /* If the skbuff is non linear tailroom is always zero.. */
+ if (!skb_cloned(skb) && skb_tailroom(skb) >= pad) {
+ memset(skb->data + skb->len, 0, pad);
+ return 0;
+ }
+
+ ntail = skb->data_len + pad - (skb->end - skb->tail);
+ if (likely(skb_cloned(skb) || ntail > 0)) {
+ if (pskb_expand_head(skb, 0, ntail, GFP_ATOMIC)) ;
+ goto free_skb;
+ }
+#ifdef MAX_SKB_FRAGS
+ if (skb_is_nonlinear(skb) && !__pskb_pull_tail(skb, skb->data_len))
+ goto free_skb;
+
+#endif
+ memset(skb->data + skb->len, 0, pad);
+ return 0;
+
+free_skb:
+ kfree_skb(skb);
+ return -ENOMEM;
+}
+
+#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,4)))
+int _kc_pci_save_state(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct adapter_struct *adapter = netdev_priv(netdev);
+ int size = PCI_CONFIG_SPACE_LEN, i;
+ u16 pcie_cap_offset, pcie_link_status;
+
+#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) )
+ /* no ->dev for 2.4 kernels */
+ WARN_ON(pdev->dev.driver_data == NULL);
+#endif
+ pcie_cap_offset = pci_find_capability(pdev, PCI_CAP_ID_EXP);
+ if (pcie_cap_offset) {
+ if (!pci_read_config_word(pdev,
+ pcie_cap_offset + PCIE_LINK_STATUS,
+ &pcie_link_status))
+ size = PCIE_CONFIG_SPACE_LEN;
+ }
+ pci_config_space_ich8lan();
+#ifdef HAVE_PCI_ERS
+ if (adapter->config_space == NULL)
+#else
+ WARN_ON(adapter->config_space != NULL);
+#endif
+ adapter->config_space = kmalloc(size, GFP_KERNEL);
+ if (!adapter->config_space) {
+ printk(KERN_ERR "Out of memory in pci_save_state\n");
+ return -ENOMEM;
+ }
+ for (i = 0; i < (size / 4); i++)
+ pci_read_config_dword(pdev, i * 4, &adapter->config_space[i]);
+ return 0;
+}
+
+void _kc_pci_restore_state(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct adapter_struct *adapter = netdev_priv(netdev);
+ int size = PCI_CONFIG_SPACE_LEN, i;
+ u16 pcie_cap_offset;
+ u16 pcie_link_status;
+
+ if (adapter->config_space != NULL) {
+ pcie_cap_offset = pci_find_capability(pdev, PCI_CAP_ID_EXP);
+ if (pcie_cap_offset &&
+ !pci_read_config_word(pdev,
+ pcie_cap_offset + PCIE_LINK_STATUS,
+ &pcie_link_status))
+ size = PCIE_CONFIG_SPACE_LEN;
+
+ pci_config_space_ich8lan();
+ for (i = 0; i < (size / 4); i++)
+ pci_write_config_dword(pdev, i * 4,
+ adapter->config_space[i]);
+#ifndef HAVE_PCI_ERS
+ kfree(adapter->config_space);
+ adapter->config_space = NULL;
+#endif
+ }
+}
+#endif /* !(RHEL_RELEASE_CODE >= RHEL 5.4) */
+
+#ifdef HAVE_PCI_ERS
+void _kc_free_netdev(struct net_device *netdev)
+{
+ struct adapter_struct *adapter = netdev_priv(netdev);
+
+ if (adapter->config_space != NULL)
+ kfree(adapter->config_space);
+#ifdef CONFIG_SYSFS
+ if (netdev->reg_state == NETREG_UNINITIALIZED) {
+ kfree((char *)netdev - netdev->padded);
+ } else {
+ BUG_ON(netdev->reg_state != NETREG_UNREGISTERED);
+ netdev->reg_state = NETREG_RELEASED;
+ class_device_put(&netdev->class_dev);
+ }
+#else
+ kfree((char *)netdev - netdev->padded);
+#endif
+}
+#endif
+
+void *_kc_kmemdup(const void *src, size_t len, unsigned gfp)
+{
+ void *p;
+
+ p = kzalloc(len, gfp);
+ if (p)
+ memcpy(p, src, len);
+ return p;
+}
+#endif /* <= 2.6.19 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) )
+/* hexdump code taken from lib/hexdump.c */
+static void _kc_hex_dump_to_buffer(const void *buf, size_t len, int rowsize,
+ int groupsize, unsigned char *linebuf,
+ size_t linebuflen, bool ascii)
+{
+ const u8 *ptr = buf;
+ u8 ch;
+ int j, lx = 0;
+ int ascii_column;
+
+ if (rowsize != 16 && rowsize != 32)
+ rowsize = 16;
+
+ if (!len)
+ goto nil;
+ if (len > rowsize) /* limit to one line at a time */
+ len = rowsize;
+ if ((len % groupsize) != 0) /* no mixed size output */
+ groupsize = 1;
+
+ switch (groupsize) {
+ case 8:{
+ const u64 *ptr8 = buf;
+ int ngroups = len / groupsize;
+
+ for (j = 0; j < ngroups; j++)
+ lx +=
+ scnprintf((char *)(linebuf + lx),
+ linebuflen - lx, "%s%16.16llx",
+ j ? " " : "",
+ (unsigned long long)*(ptr8 + j));
+ ascii_column = 17 * ngroups + 2;
+ break;
+ }
+
+ case 4:{
+ const u32 *ptr4 = buf;
+ int ngroups = len / groupsize;
+
+ for (j = 0; j < ngroups; j++)
+ lx +=
+ scnprintf((char *)(linebuf + lx),
+ linebuflen - lx, "%s%8.8x",
+ j ? " " : "", *(ptr4 + j));
+ ascii_column = 9 * ngroups + 2;
+ break;
+ }
+
+ case 2:{
+ const u16 *ptr2 = buf;
+ int ngroups = len / groupsize;
+
+ for (j = 0; j < ngroups; j++)
+ lx +=
+ scnprintf((char *)(linebuf + lx),
+ linebuflen - lx, "%s%4.4x",
+ j ? " " : "", *(ptr2 + j));
+ ascii_column = 5 * ngroups + 2;
+ break;
+ }
+
+ default:
+ for (j = 0; (j < len) && (lx + 3) <= linebuflen; j++) {
+ ch = ptr[j];
+ linebuf[lx++] = hex_asc(ch >> 4);
+ linebuf[lx++] = hex_asc(ch & 0x0f);
+ linebuf[lx++] = ' ';
+ }
+ if (j)
+ lx--;
+
+ ascii_column = 3 * rowsize + 2;
+ break;
+ }
+ if (!ascii)
+ goto nil;
+
+ while (lx < (linebuflen - 1) && lx < (ascii_column - 1))
+ linebuf[lx++] = ' ';
+ for (j = 0; (j < len) && (lx + 2) < linebuflen; j++)
+ linebuf[lx++] = (isascii(ptr[j]) && isprint(ptr[j])) ? ptr[j]
+ : '.';
+nil:
+ linebuf[lx++] = '\0';
+}
+
+void _kc_print_hex_dump(const char *level,
+ const char *prefix_str, int prefix_type,
+ int rowsize, int groupsize,
+ const void *buf, size_t len, bool ascii)
+{
+ const u8 *ptr = buf;
+ int i, linelen, remaining = len;
+ unsigned char linebuf[200];
+
+ if (rowsize != 16 && rowsize != 32)
+ rowsize = 16;
+
+ for (i = 0; i < len; i += rowsize) {
+ linelen = min(remaining, rowsize);
+ remaining -= rowsize;
+ _kc_hex_dump_to_buffer(ptr + i, linelen, rowsize, groupsize,
+ linebuf, sizeof(linebuf), ascii);
+
+ switch (prefix_type) {
+ case DUMP_PREFIX_ADDRESS:
+ printk("%s%s%*p: %s\n", level, prefix_str,
+ (int)(2 * sizeof(void *)), ptr + i, linebuf);
+ break;
+ case DUMP_PREFIX_OFFSET:
+ printk("%s%s%.8x: %s\n", level, prefix_str, i, linebuf);
+ break;
+ default:
+ printk("%s%s%s\n", level, prefix_str, linebuf);
+ break;
+ }
+ }
+}
+#endif /* < 2.6.22 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) )
+#ifdef NAPI
+
+int __kc_adapter_clean(struct net_device *netdev, int *budget)
+{
+ int work_done;
+ int work_to_do = min(*budget, netdev->quota);
+ struct adapter_struct *adapter = netdev_priv(netdev);
+ struct napi_struct *napi = &adapter->napi;
+ work_done = napi->poll(napi, work_to_do);
+ *budget -= work_done;
+ netdev->quota -= work_done;
+ return (work_done >= work_to_do) ? 1 : 0;
+}
+#endif /* NAPI */
+#endif /* <= 2.6.24 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) )
+void _kc_pci_disable_link_state(struct pci_dev *pdev, int state)
+{
+ struct pci_dev *parent = pdev->bus->self;
+ u16 link_state;
+ int pos;
+
+ if (!parent)
+ return;
+
+ pos = pci_find_capability(parent, PCI_CAP_ID_EXP);
+ if (pos) {
+ pci_read_config_word(parent, pos + PCI_EXP_LNKCTL, &link_state);
+ link_state &= ~state;
+ pci_write_config_word(parent, pos + PCI_EXP_LNKCTL, link_state);
+ }
+}
+#endif /* < 2.6.26 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27) )
+#ifdef HAVE_TX_MQ
+void _kc_netif_tx_stop_all_queues(struct net_device *netdev)
+{
+ struct adapter_struct *adapter = netdev_priv(netdev);
+ int i;
+
+ netif_stop_queue(netdev);
+ if (netif_is_multiqueue(netdev))
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ netif_stop_subqueue(netdev, i);
+}
+
+void _kc_netif_tx_wake_all_queues(struct net_device *netdev)
+{
+ struct adapter_struct *adapter = netdev_priv(netdev);
+ int i;
+
+ netif_wake_queue(netdev);
+ if (netif_is_multiqueue(netdev))
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ netif_wake_subqueue(netdev, i);
+}
+
+void _kc_netif_tx_start_all_queues(struct net_device *netdev)
+{
+ struct adapter_struct *adapter = netdev_priv(netdev);
+ int i;
+
+ netif_start_queue(netdev);
+ if (netif_is_multiqueue(netdev))
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ netif_start_subqueue(netdev, i);
+}
+#endif /* HAVE_TX_MQ */
+
+#ifndef __WARN_printf
+void __kc_warn_slowpath(const char *file, int line, const char *fmt, ...)
+{
+ va_list args;
+
+ printk(KERN_WARNING "------------[ cut here ]------------\n");
+ printk(KERN_WARNING "WARNING: at %s:%d %s()\n", file, line);
+ va_start(args, fmt);
+ vprintk(fmt, args);
+ va_end(args);
+
+ dump_stack();
+}
+#endif /* __WARN_printf */
+#endif /* < 2.6.27 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) )
+
+int _kc_pci_prepare_to_sleep(struct pci_dev *dev)
+{
+ pci_power_t target_state;
+ int error;
+
+ target_state = pci_choose_state(dev, PMSG_SUSPEND);
+
+ pci_enable_wake(dev, target_state, true);
+
+ error = pci_set_power_state(dev, target_state);
+
+ if (error)
+ pci_enable_wake(dev, target_state, false);
+
+ return error;
+}
+
+int _kc_pci_wake_from_d3(struct pci_dev *dev, bool enable)
+{
+ int err;
+
+ err = pci_enable_wake(dev, PCI_D3cold, enable);
+ if (err)
+ goto out;
+
+ err = pci_enable_wake(dev, PCI_D3hot, enable);
+
+out:
+ return err;
+}
+
+void _kc_skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page,
+ int off, int size)
+{
+ skb_fill_page_desc(skb, i, page, off, size);
+ skb->len += size;
+ skb->data_len += size;
+ skb->truesize += size;
+}
+#endif /* < 2.6.28 */
+
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) )
+#endif /* < 2.6.35 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36) )
+static const u32 _kc_flags_dup_features =
+ (ETH_FLAG_LRO | ETH_FLAG_NTUPLE | ETH_FLAG_RXHASH);
+
+u32 _kc_ethtool_op_get_flags(struct net_device *dev)
+{
+ return dev->features & _kc_flags_dup_features;
+}
+
+int _kc_ethtool_op_set_flags(struct net_device *dev, u32 data, u32 supported)
+{
+ if (data & ~supported)
+ return -EINVAL;
+
+ dev->features = ((dev->features & ~_kc_flags_dup_features) |
+ (data & _kc_flags_dup_features));
+ return 0;
+}
+#endif /* < 2.6.36 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) )
+#endif /* < 2.6.38 */
+
+/******************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,39) )
+#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(6,0)))
+#endif /* !(RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(6,0)) */
+#endif /* < 2.6.39 */
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2012 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _KCOMPAT_H_
+#define _KCOMPAT_H_
+
+#ifndef LINUX_VERSION_CODE
+#include <linux/version.h>
+#else
+#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))
+#endif
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/udp.h>
+#include <linux/mii.h>
+#include <linux/vmalloc.h>
+#include <asm/io.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+
+/* NAPI enable/disable flags here */
+#define NAPI
+#ifdef E1000E_NO_NAPI
+#undef NAPI
+#endif
+
+#define adapter_struct e1000_adapter
+#define CONFIG_E1000E_MSIX
+
+/* and finally set defines so that the code sees the changes */
+#ifdef NAPI
+#ifndef CONFIG_E1000E_NAPI
+#define CONFIG_E1000E_NAPI
+#endif
+#else
+#undef CONFIG_E1000E_NAPI
+#endif /* NAPI */
+
+/* packet split disable/enable */
+#ifdef DISABLE_PACKET_SPLIT
+#endif /* DISABLE_PACKET_SPLIT */
+
+/* MSI compatibility code for all kernels and drivers */
+#ifdef DISABLE_PCI_MSI
+#undef CONFIG_PCI_MSI
+#endif
+#ifndef CONFIG_PCI_MSI
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,8) )
+struct msix_entry {
+ u16 vector; /* kernel uses to write allocated vector */
+ u16 entry; /* driver uses to specify entry, OS writes */
+};
+#endif
+#undef pci_enable_msi
+#define pci_enable_msi(a) -ENOTSUPP
+#undef pci_disable_msi
+#define pci_disable_msi(a) do {} while (0)
+#undef pci_enable_msix
+#define pci_enable_msix(a, b, c) -ENOTSUPP
+#undef pci_disable_msix
+#define pci_disable_msix(a) do {} while (0)
+#define msi_remove_pci_irq_vectors(a) do {} while (0)
+#endif /* CONFIG_PCI_MSI */
+#ifdef DISABLE_PM
+#undef CONFIG_PM
+#endif
+
+#ifdef DISABLE_NET_POLL_CONTROLLER
+#undef CONFIG_NET_POLL_CONTROLLER
+#endif
+
+#ifndef PMSG_SUSPEND
+#define PMSG_SUSPEND 3
+#endif
+
+/* generic boolean compatibility */
+#undef TRUE
+#undef FALSE
+#define TRUE true
+#define FALSE false
+#ifdef GCC_VERSION
+#if ( GCC_VERSION < 3000 )
+#define _Bool char
+#endif
+#else
+#define _Bool char
+#endif
+
+/* kernels less than 2.4.14 don't have this */
+#ifndef ETH_P_8021Q
+#define ETH_P_8021Q 0x8100
+#endif
+
+#ifndef module_param
+#define module_param(v,t,p) MODULE_PARM(v, "i");
+#endif
+
+#ifndef DMA_64BIT_MASK
+#define DMA_64BIT_MASK 0xffffffffffffffffULL
+#endif
+
+#ifndef DMA_32BIT_MASK
+#define DMA_32BIT_MASK 0x00000000ffffffffULL
+#endif
+
+#ifndef PCI_CAP_ID_EXP
+#define PCI_CAP_ID_EXP 0x10
+#endif
+
+#ifndef PCIE_LINK_STATE_L0S
+#define PCIE_LINK_STATE_L0S 1
+#endif
+#ifndef PCIE_LINK_STATE_L1
+#define PCIE_LINK_STATE_L1 2
+#endif
+
+#ifndef mmiowb
+#ifdef CONFIG_IA64
+#define mmiowb() asm volatile ("mf.a" ::: "memory")
+#else
+#define mmiowb()
+#endif
+#endif
+
+#ifndef SET_NETDEV_DEV
+#define SET_NETDEV_DEV(net, pdev)
+#endif
+
+#if !defined(HAVE_FREE_NETDEV) && ( LINUX_VERSION_CODE < KERNEL_VERSION(3,1,0) )
+#define free_netdev(x) kfree(x)
+#endif
+
+#ifdef HAVE_POLL_CONTROLLER
+#define CONFIG_NET_POLL_CONTROLLER
+#endif
+
+#ifndef SKB_DATAREF_SHIFT
+/* if we do not have the infrastructure to detect if skb_header is cloned
+ just return false in all cases */
+#define skb_header_cloned(x) 0
+#endif
+
+#ifndef NETIF_F_GSO
+#define gso_size tso_size
+#define gso_segs tso_segs
+#endif
+
+#ifndef NETIF_F_GRO
+#define vlan_gro_receive(_napi, _vlgrp, _vlan, _skb) \
+ vlan_hwaccel_receive_skb(_skb, _vlgrp, _vlan)
+#define napi_gro_receive(_napi, _skb) netif_receive_skb(_skb)
+#endif
+
+#ifndef NETIF_F_SCTP_CSUM
+#define NETIF_F_SCTP_CSUM 0
+#endif
+
+#ifndef NETIF_F_LRO
+#define NETIF_F_LRO (1 << 15)
+#endif
+
+#ifndef NETIF_F_NTUPLE
+#define NETIF_F_NTUPLE (1 << 27)
+#endif
+
+#ifndef IPPROTO_SCTP
+#define IPPROTO_SCTP 132
+#endif
+
+#ifndef CHECKSUM_PARTIAL
+#define CHECKSUM_PARTIAL CHECKSUM_HW
+#define CHECKSUM_COMPLETE CHECKSUM_HW
+#endif
+
+#ifndef __read_mostly
+#define __read_mostly
+#endif
+
+#ifndef MII_RESV1
+#define MII_RESV1 0x17 /* Reserved... */
+#endif
+
+#ifndef unlikely
+#define unlikely(_x) _x
+#define likely(_x) _x
+#endif
+
+#ifndef WARN_ON
+#define WARN_ON(x)
+#endif
+
+#ifndef PCI_DEVICE
+#define PCI_DEVICE(vend,dev) \
+ .vendor = (vend), .device = (dev), \
+ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
+#endif
+
+#ifndef node_online
+#define node_online(node) ((node) == 0)
+#endif
+
+#ifndef num_online_cpus
+#define num_online_cpus() smp_num_cpus
+#endif
+
+#ifndef cpu_online
+#define cpu_online(cpuid) test_bit((cpuid), &cpu_online_map)
+#endif
+
+#ifndef _LINUX_RANDOM_H
+#include <linux/random.h>
+#endif
+
+#ifndef DECLARE_BITMAP
+#ifndef BITS_TO_LONGS
+#define BITS_TO_LONGS(bits) (((bits)+BITS_PER_LONG-1)/BITS_PER_LONG)
+#endif
+#define DECLARE_BITMAP(name,bits) long name[BITS_TO_LONGS(bits)]
+#endif
+
+#ifndef VLAN_HLEN
+#define VLAN_HLEN 4
+#endif
+
+#ifndef VLAN_ETH_HLEN
+#define VLAN_ETH_HLEN 18
+#endif
+
+#ifndef VLAN_ETH_FRAME_LEN
+#define VLAN_ETH_FRAME_LEN 1518
+#endif
+
+#if !defined(IXGBE_DCA) && !defined(IGB_DCA)
+#define dca_get_tag(b) 0
+#define dca_add_requester(a) -1
+#define dca_remove_requester(b) do { } while(0)
+#define DCA_PROVIDER_ADD 0x0001
+#define DCA_PROVIDER_REMOVE 0x0002
+#endif
+
+#ifndef DCA_GET_TAG_TWO_ARGS
+#define dca3_get_tag(a,b) dca_get_tag(b)
+#endif
+
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+#if defined(__i386__) || defined(__x86_64__)
+#define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+#endif
+#endif
+
+/* taken from 2.6.24 definition in linux/kernel.h */
+#ifndef IS_ALIGNED
+#define IS_ALIGNED(x,a) (((x) % ((typeof(x))(a))) == 0)
+#endif
+
+#ifndef NETIF_F_HW_VLAN_TX
+struct _kc_vlan_ethhdr {
+ unsigned char h_dest[ETH_ALEN];
+ unsigned char h_source[ETH_ALEN];
+ __be16 h_vlan_proto;
+ __be16 h_vlan_TCI;
+ __be16 h_vlan_encapsulated_proto;
+};
+#define vlan_ethhdr _kc_vlan_ethhdr
+struct _kc_vlan_hdr {
+ __be16 h_vlan_TCI;
+ __be16 h_vlan_encapsulated_proto;
+};
+#define vlan_hdr _kc_vlan_hdr
+#define vlan_tx_tag_present(_skb) 0
+#define vlan_tx_tag_get(_skb) 0
+#endif
+
+#ifndef VLAN_PRIO_SHIFT
+#define VLAN_PRIO_SHIFT 13
+#endif
+
+#ifndef __GFP_COLD
+#define __GFP_COLD 0
+#endif
+
+/*****************************************************************************/
+/* Installations with ethtool version without eeprom, adapter id, or statistics
+ * support */
+
+#ifndef ETH_GSTRING_LEN
+#define ETH_GSTRING_LEN 32
+#endif
+
+#ifndef ETHTOOL_GSTATS
+#define ETHTOOL_GSTATS 0x1d
+#undef ethtool_drvinfo
+#define ethtool_drvinfo k_ethtool_drvinfo
+struct k_ethtool_drvinfo {
+ u32 cmd;
+ char driver[32];
+ char version[32];
+ char fw_version[32];
+ char bus_info[32];
+ char reserved1[32];
+ char reserved2[16];
+ u32 n_stats;
+ u32 testinfo_len;
+ u32 eedump_len;
+ u32 regdump_len;
+};
+
+struct ethtool_stats {
+ u32 cmd;
+ u32 n_stats;
+ u64 data[0];
+};
+#endif /* ETHTOOL_GSTATS */
+
+#ifndef ETHTOOL_PHYS_ID
+#define ETHTOOL_PHYS_ID 0x1c
+#endif /* ETHTOOL_PHYS_ID */
+
+#ifndef ETHTOOL_GSTRINGS
+#define ETHTOOL_GSTRINGS 0x1b
+enum ethtool_stringset {
+ ETH_SS_TEST = 0,
+ ETH_SS_STATS,
+};
+struct ethtool_gstrings {
+ u32 cmd; /* ETHTOOL_GSTRINGS */
+ u32 string_set; /* string set id e.c. ETH_SS_TEST, etc */
+ u32 len; /* number of strings in the string set */
+ u8 data[0];
+};
+#endif /* ETHTOOL_GSTRINGS */
+
+#ifndef ETHTOOL_TEST
+#define ETHTOOL_TEST 0x1a
+enum ethtool_test_flags {
+ ETH_TEST_FL_OFFLINE = (1 << 0),
+ ETH_TEST_FL_FAILED = (1 << 1),
+};
+struct ethtool_test {
+ u32 cmd;
+ u32 flags;
+ u32 reserved;
+ u32 len;
+ u64 data[0];
+};
+#endif /* ETHTOOL_TEST */
+
+#ifndef ETHTOOL_GEEPROM
+#define ETHTOOL_GEEPROM 0xb
+#undef ETHTOOL_GREGS
+struct ethtool_eeprom {
+ u32 cmd;
+ u32 magic;
+ u32 offset;
+ u32 len;
+ u8 data[0];
+};
+
+struct ethtool_value {
+ u32 cmd;
+ u32 data;
+};
+#endif /* ETHTOOL_GEEPROM */
+
+#ifndef ETHTOOL_GLINK
+#define ETHTOOL_GLINK 0xa
+#endif /* ETHTOOL_GLINK */
+
+#ifndef ETHTOOL_GWOL
+#define ETHTOOL_GWOL 0x5
+#define ETHTOOL_SWOL 0x6
+#define SOPASS_MAX 6
+struct ethtool_wolinfo {
+ u32 cmd;
+ u32 supported;
+ u32 wolopts;
+ u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */
+};
+#endif /* ETHTOOL_GWOL */
+
+#ifndef ETHTOOL_GREGS
+#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers */
+#define ethtool_regs _kc_ethtool_regs
+/* for passing big chunks of data */
+struct _kc_ethtool_regs {
+ u32 cmd;
+ u32 version; /* driver-specific, indicates different chips/revs */
+ u32 len; /* bytes */
+ u8 data[0];
+};
+#endif /* ETHTOOL_GREGS */
+
+#ifndef ETHTOOL_GMSGLVL
+#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */
+#endif
+#ifndef ETHTOOL_SMSGLVL
+#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level, priv. */
+#endif
+#ifndef ETHTOOL_NWAY_RST
+#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation, priv */
+#endif
+#ifndef ETHTOOL_GLINK
+#define ETHTOOL_GLINK 0x0000000a /* Get link status */
+#endif
+#ifndef ETHTOOL_GEEPROM
+#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */
+#endif
+#ifndef ETHTOOL_SEEPROM
+#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data */
+#endif
+#ifndef ETHTOOL_GCOALESCE
+#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */
+/* for configuring coalescing parameters of chip */
+#define ethtool_coalesce _kc_ethtool_coalesce
+struct _kc_ethtool_coalesce {
+ u32 cmd; /* ETHTOOL_{G,S}COALESCE */
+
+ /* How many usecs to delay an RX interrupt after
+ * a packet arrives. If 0, only rx_max_coalesced_frames
+ * is used.
+ */
+ u32 rx_coalesce_usecs;
+
+ /* How many packets to delay an RX interrupt after
+ * a packet arrives. If 0, only rx_coalesce_usecs is
+ * used. It is illegal to set both usecs and max frames
+ * to zero as this would cause RX interrupts to never be
+ * generated.
+ */
+ u32 rx_max_coalesced_frames;
+
+ /* Same as above two parameters, except that these values
+ * apply while an IRQ is being serviced by the host. Not
+ * all cards support this feature and the values are ignored
+ * in that case.
+ */
+ u32 rx_coalesce_usecs_irq;
+ u32 rx_max_coalesced_frames_irq;
+
+ /* How many usecs to delay a TX interrupt after
+ * a packet is sent. If 0, only tx_max_coalesced_frames
+ * is used.
+ */
+ u32 tx_coalesce_usecs;
+
+ /* How many packets to delay a TX interrupt after
+ * a packet is sent. If 0, only tx_coalesce_usecs is
+ * used. It is illegal to set both usecs and max frames
+ * to zero as this would cause TX interrupts to never be
+ * generated.
+ */
+ u32 tx_max_coalesced_frames;
+
+ /* Same as above two parameters, except that these values
+ * apply while an IRQ is being serviced by the host. Not
+ * all cards support this feature and the values are ignored
+ * in that case.
+ */
+ u32 tx_coalesce_usecs_irq;
+ u32 tx_max_coalesced_frames_irq;
+
+ /* How many usecs to delay in-memory statistics
+ * block updates. Some drivers do not have an in-memory
+ * statistic block, and in such cases this value is ignored.
+ * This value must not be zero.
+ */
+ u32 stats_block_coalesce_usecs;
+
+ /* Adaptive RX/TX coalescing is an algorithm implemented by
+ * some drivers to improve latency under low packet rates and
+ * improve throughput under high packet rates. Some drivers
+ * only implement one of RX or TX adaptive coalescing. Anything
+ * not implemented by the driver causes these values to be
+ * silently ignored.
+ */
+ u32 use_adaptive_rx_coalesce;
+ u32 use_adaptive_tx_coalesce;
+
+ /* When the packet rate (measured in packets per second)
+ * is below pkt_rate_low, the {rx,tx}_*_low parameters are
+ * used.
+ */
+ u32 pkt_rate_low;
+ u32 rx_coalesce_usecs_low;
+ u32 rx_max_coalesced_frames_low;
+ u32 tx_coalesce_usecs_low;
+ u32 tx_max_coalesced_frames_low;
+
+ /* When the packet rate is below pkt_rate_high but above
+ * pkt_rate_low (both measured in packets per second) the
+ * normal {rx,tx}_* coalescing parameters are used.
+ */
+
+ /* When the packet rate is (measured in packets per second)
+ * is above pkt_rate_high, the {rx,tx}_*_high parameters are
+ * used.
+ */
+ u32 pkt_rate_high;
+ u32 rx_coalesce_usecs_high;
+ u32 rx_max_coalesced_frames_high;
+ u32 tx_coalesce_usecs_high;
+ u32 tx_max_coalesced_frames_high;
+
+ /* How often to do adaptive coalescing packet rate sampling,
+ * measured in seconds. Must not be zero.
+ */
+ u32 rate_sample_interval;
+};
+#endif /* ETHTOOL_GCOALESCE */
+
+#ifndef ETHTOOL_SCOALESCE
+#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */
+#endif
+#ifndef ETHTOOL_GRINGPARAM
+#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */
+/* for configuring RX/TX ring parameters */
+#define ethtool_ringparam _kc_ethtool_ringparam
+struct _kc_ethtool_ringparam {
+ u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */
+
+ /* Read only attributes. These indicate the maximum number
+ * of pending RX/TX ring entries the driver will allow the
+ * user to set.
+ */
+ u32 rx_max_pending;
+ u32 rx_mini_max_pending;
+ u32 rx_jumbo_max_pending;
+ u32 tx_max_pending;
+
+ /* Values changeable by the user. The valid values are
+ * in the range 1 to the "*_max_pending" counterpart above.
+ */
+ u32 rx_pending;
+ u32 rx_mini_pending;
+ u32 rx_jumbo_pending;
+ u32 tx_pending;
+};
+#endif /* ETHTOOL_GRINGPARAM */
+
+#ifndef ETHTOOL_SRINGPARAM
+#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters, priv. */
+#endif
+#ifndef ETHTOOL_GPAUSEPARAM
+#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */
+/* for configuring link flow control parameters */
+#define ethtool_pauseparam _kc_ethtool_pauseparam
+struct _kc_ethtool_pauseparam {
+ u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */
+
+ /* If the link is being auto-negotiated (via ethtool_cmd.autoneg
+ * being true) the user may set 'autoneg' here non-zero to have the
+ * pause parameters be auto-negotiated too. In such a case, the
+ * {rx,tx}_pause values below determine what capabilities are
+ * advertised.
+ *
+ * If 'autoneg' is zero or the link is not being auto-negotiated,
+ * then {rx,tx}_pause force the driver to use/not-use pause
+ * flow control.
+ */
+ u32 autoneg;
+ u32 rx_pause;
+ u32 tx_pause;
+};
+#endif /* ETHTOOL_GPAUSEPARAM */
+
+#ifndef ETHTOOL_SPAUSEPARAM
+#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */
+#endif
+#ifndef ETHTOOL_GRXCSUM
+#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */
+#endif
+#ifndef ETHTOOL_SRXCSUM
+#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */
+#endif
+#ifndef ETHTOOL_GTXCSUM
+#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */
+#endif
+#ifndef ETHTOOL_STXCSUM
+#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */
+#endif
+#ifndef ETHTOOL_GSG
+#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable
+ * (ethtool_value) */
+#endif
+#ifndef ETHTOOL_SSG
+#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable
+ * (ethtool_value). */
+#endif
+#ifndef ETHTOOL_TEST
+#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test, priv. */
+#endif
+#ifndef ETHTOOL_GSTRINGS
+#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */
+#endif
+#ifndef ETHTOOL_PHYS_ID
+#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */
+#endif
+#ifndef ETHTOOL_GSTATS
+#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */
+#endif
+#ifndef ETHTOOL_GTSO
+#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */
+#endif
+#ifndef ETHTOOL_STSO
+#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */
+#endif
+
+#ifndef ETHTOOL_BUSINFO_LEN
+#define ETHTOOL_BUSINFO_LEN 32
+#endif
+
+#ifndef RHEL_RELEASE_CODE
+/* NOTE: RHEL_RELEASE_* introduced in RHEL4.5 */
+#define RHEL_RELEASE_CODE 0
+#endif
+#ifndef RHEL_RELEASE_VERSION
+#define RHEL_RELEASE_VERSION(a,b) (((a) << 8) + (b))
+#endif
+#ifndef AX_RELEASE_CODE
+#define AX_RELEASE_CODE 0
+#endif
+#ifndef AX_RELEASE_VERSION
+#define AX_RELEASE_VERSION(a,b) (((a) << 8) + (b))
+#endif
+
+/* SuSE version macro is the same as Linux kernel version */
+#ifndef SLE_VERSION
+#define SLE_VERSION(a,b,c) KERNEL_VERSION(a,b,c)
+#endif
+#ifndef SLE_VERSION_CODE
+#ifdef CONFIG_SUSE_KERNEL
+/* SLES11 GA is 2.6.27 based */
+#if ( LINUX_VERSION_CODE == KERNEL_VERSION(2,6,27) )
+#define SLE_VERSION_CODE SLE_VERSION(11,0,0)
+#elif ( LINUX_VERSION_CODE == KERNEL_VERSION(2,6,32) )
+/* SLES11 SP1 is 2.6.32 based */
+#define SLE_VERSION_CODE SLE_VERSION(11,1,0)
+#else
+#define SLE_VERSION_CODE 0
+#endif
+#else /* CONFIG_SUSE_KERNEL */
+#define SLE_VERSION_CODE 0
+#endif /* CONFIG_SUSE_KERNEL */
+#endif /* SLE_VERSION_CODE */
+
+#ifdef __KLOCWORK__
+#ifdef ARRAY_SIZE
+#undef ARRAY_SIZE
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+#endif
+#endif /* __KLOCWORK__ */
+
+/*****************************************************************************/
+/* 2.4.3 => 2.4.0 */
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3) )
+
+/**************************************/
+/* PCI DRIVER API */
+
+#ifndef pci_set_dma_mask
+#define pci_set_dma_mask _kc_pci_set_dma_mask
+extern int _kc_pci_set_dma_mask(struct pci_dev *dev, dma_addr_t mask);
+#endif
+
+#ifndef pci_request_regions
+#define pci_request_regions _kc_pci_request_regions
+extern int _kc_pci_request_regions(struct pci_dev *pdev, char *res_name);
+#endif
+
+#ifndef pci_release_regions
+#define pci_release_regions _kc_pci_release_regions
+extern void _kc_pci_release_regions(struct pci_dev *pdev);
+#endif
+
+/**************************************/
+/* NETWORK DRIVER API */
+
+#ifndef alloc_etherdev
+#define alloc_etherdev _kc_alloc_etherdev
+extern struct net_device *_kc_alloc_etherdev(int sizeof_priv);
+#endif
+
+#ifndef is_valid_ether_addr
+#define is_valid_ether_addr _kc_is_valid_ether_addr
+extern int _kc_is_valid_ether_addr(u8 *addr);
+#endif
+
+/**************************************/
+/* MISCELLANEOUS */
+
+#ifndef INIT_TQUEUE
+#define INIT_TQUEUE(_tq, _routine, _data) \
+ do { \
+ INIT_LIST_HEAD(&(_tq)->list); \
+ (_tq)->sync = 0; \
+ (_tq)->routine = _routine; \
+ (_tq)->data = _data; \
+ } while (0)
+#endif
+
+#endif /* 2.4.3 => 2.4.0 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5) )
+/* Generic MII registers. */
+#define MII_BMCR 0x00 /* Basic mode control register */
+#define MII_BMSR 0x01 /* Basic mode status register */
+#define MII_PHYSID1 0x02 /* PHYS ID 1 */
+#define MII_PHYSID2 0x03 /* PHYS ID 2 */
+#define MII_ADVERTISE 0x04 /* Advertisement control reg */
+#define MII_LPA 0x05 /* Link partner ability reg */
+#define MII_EXPANSION 0x06 /* Expansion register */
+/* Basic mode control register. */
+#define BMCR_FULLDPLX 0x0100 /* Full duplex */
+#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */
+/* Basic mode status register. */
+#define BMSR_ERCAP 0x0001 /* Ext-reg capability */
+#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */
+#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */
+#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */
+#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */
+#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */
+/* Advertisement control register. */
+#define ADVERTISE_CSMA 0x0001 /* Only selector supported */
+#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
+#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
+#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
+#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
+#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
+ ADVERTISE_100HALF | ADVERTISE_100FULL)
+/* Expansion register for auto-negotiation. */
+#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */
+#endif
+
+/*****************************************************************************/
+/* 2.4.6 => 2.4.3 */
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6) )
+
+#ifndef pci_set_power_state
+#define pci_set_power_state _kc_pci_set_power_state
+extern int _kc_pci_set_power_state(struct pci_dev *dev, int state);
+#endif
+
+#ifndef pci_enable_wake
+#define pci_enable_wake _kc_pci_enable_wake
+extern int _kc_pci_enable_wake(struct pci_dev *pdev, u32 state, int enable);
+#endif
+
+#ifndef pci_disable_device
+#define pci_disable_device _kc_pci_disable_device
+extern void _kc_pci_disable_device(struct pci_dev *pdev);
+#endif
+
+/* PCI PM entry point syntax changed, so don't support suspend/resume */
+#undef CONFIG_PM
+
+#endif /* 2.4.6 => 2.4.3 */
+
+#ifndef HAVE_PCI_SET_MWI
+#define pci_set_mwi(X) pci_write_config_word(X, \
+ PCI_COMMAND, adapter->hw.bus.pci_cmd_word | \
+ PCI_COMMAND_INVALIDATE);
+#define pci_clear_mwi(X) pci_write_config_word(X, \
+ PCI_COMMAND, adapter->hw.bus.pci_cmd_word & \
+ ~PCI_COMMAND_INVALIDATE);
+#endif
+
+/*****************************************************************************/
+/* 2.4.10 => 2.4.9 */
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,10) )
+
+/**************************************/
+/* MODULE API */
+
+#ifndef MODULE_LICENSE
+#define MODULE_LICENSE(X)
+#endif
+
+/**************************************/
+/* OTHER */
+
+#undef min
+#define min(x,y) ({ \
+ const typeof(x) _x = (x); \
+ const typeof(y) _y = (y); \
+ (void) (&_x == &_y); \
+ _x < _y ? _x : _y; })
+
+#undef max
+#define max(x,y) ({ \
+ const typeof(x) _x = (x); \
+ const typeof(y) _y = (y); \
+ (void) (&_x == &_y); \
+ _x > _y ? _x : _y; })
+
+#define min_t(type,x,y) ({ \
+ type _x = (x); \
+ type _y = (y); \
+ _x < _y ? _x : _y; })
+
+#define max_t(type,x,y) ({ \
+ type _x = (x); \
+ type _y = (y); \
+ _x > _y ? _x : _y; })
+
+#ifndef list_for_each_safe
+#define list_for_each_safe(pos, n, head) \
+ for (pos = (head)->next, n = pos->next; pos != (head); \
+ pos = n, n = pos->next)
+#endif
+
+#ifndef ____cacheline_aligned_in_smp
+#ifdef CONFIG_SMP
+#define ____cacheline_aligned_in_smp ____cacheline_aligned
+#else
+#define ____cacheline_aligned_in_smp
+#endif /* CONFIG_SMP */
+#endif
+
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8) )
+extern int _kc_snprintf(char *buf, size_t size, const char *fmt, ...);
+#define snprintf(buf, size, fmt, args...) _kc_snprintf(buf, size, fmt, ##args)
+extern int _kc_vsnprintf(char *buf, size_t size, const char *fmt, va_list args);
+#define vsnprintf(buf, size, fmt, args) _kc_vsnprintf(buf, size, fmt, args)
+#else /* 2.4.8 => 2.4.9 */
+extern int snprintf(char *buf, size_t size, const char *fmt, ...);
+extern int vsnprintf(char *buf, size_t size, const char *fmt, va_list args);
+#endif
+#endif /* 2.4.10 -> 2.4.6 */
+
+/*****************************************************************************/
+/* 2.4.12 => 2.4.10 */
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,12) )
+#ifndef HAVE_NETIF_MSG
+#define HAVE_NETIF_MSG 1
+enum {
+ NETIF_MSG_DRV = 0x0001,
+ NETIF_MSG_PROBE = 0x0002,
+ NETIF_MSG_LINK = 0x0004,
+ NETIF_MSG_TIMER = 0x0008,
+ NETIF_MSG_IFDOWN = 0x0010,
+ NETIF_MSG_IFUP = 0x0020,
+ NETIF_MSG_RX_ERR = 0x0040,
+ NETIF_MSG_TX_ERR = 0x0080,
+ NETIF_MSG_TX_QUEUED = 0x0100,
+ NETIF_MSG_INTR = 0x0200,
+ NETIF_MSG_TX_DONE = 0x0400,
+ NETIF_MSG_RX_STATUS = 0x0800,
+ NETIF_MSG_PKTDATA = 0x1000,
+ NETIF_MSG_HW = 0x2000,
+ NETIF_MSG_WOL = 0x4000,
+};
+
+#define netif_msg_drv(p) ((p)->msg_enable & NETIF_MSG_DRV)
+#define netif_msg_probe(p) ((p)->msg_enable & NETIF_MSG_PROBE)
+#define netif_msg_link(p) ((p)->msg_enable & NETIF_MSG_LINK)
+#define netif_msg_timer(p) ((p)->msg_enable & NETIF_MSG_TIMER)
+#define netif_msg_ifdown(p) ((p)->msg_enable & NETIF_MSG_IFDOWN)
+#define netif_msg_ifup(p) ((p)->msg_enable & NETIF_MSG_IFUP)
+#define netif_msg_rx_err(p) ((p)->msg_enable & NETIF_MSG_RX_ERR)
+#define netif_msg_tx_err(p) ((p)->msg_enable & NETIF_MSG_TX_ERR)
+#define netif_msg_tx_queued(p) ((p)->msg_enable & NETIF_MSG_TX_QUEUED)
+#define netif_msg_intr(p) ((p)->msg_enable & NETIF_MSG_INTR)
+#define netif_msg_tx_done(p) ((p)->msg_enable & NETIF_MSG_TX_DONE)
+#define netif_msg_rx_status(p) ((p)->msg_enable & NETIF_MSG_RX_STATUS)
+#define netif_msg_pktdata(p) ((p)->msg_enable & NETIF_MSG_PKTDATA)
+#endif /* !HAVE_NETIF_MSG */
+#endif /* 2.4.12 => 2.4.10 */
+
+/*****************************************************************************/
+/* 2.4.13 => 2.4.12 */
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,13) )
+
+/**************************************/
+/* PCI DMA MAPPING */
+
+#ifndef virt_to_page
+#define virt_to_page(v) (mem_map + (virt_to_phys(v) >> PAGE_SHIFT))
+#endif
+
+#ifndef pci_map_page
+#define pci_map_page _kc_pci_map_page
+extern u64 _kc_pci_map_page(struct pci_dev *dev, struct page *page,
+ unsigned long offset, size_t size, int direction);
+#endif
+
+#ifndef pci_unmap_page
+#define pci_unmap_page _kc_pci_unmap_page
+extern void _kc_pci_unmap_page(struct pci_dev *dev, u64 dma_addr, size_t size,
+ int direction);
+#endif
+
+/* pci_set_dma_mask takes dma_addr_t, which is only 32-bits prior to 2.4.13 */
+
+#undef DMA_32BIT_MASK
+#define DMA_32BIT_MASK 0xffffffff
+#undef DMA_64BIT_MASK
+#define DMA_64BIT_MASK 0xffffffff
+
+/**************************************/
+/* OTHER */
+
+#ifndef cpu_relax
+#define cpu_relax() rep_nop()
+#endif
+
+struct vlan_ethhdr {
+ unsigned char h_dest[ETH_ALEN];
+ unsigned char h_source[ETH_ALEN];
+ unsigned short h_vlan_proto;
+ unsigned short h_vlan_TCI;
+ unsigned short h_vlan_encapsulated_proto;
+};
+#endif /* 2.4.13 => 2.4.12 */
+
+/*****************************************************************************/
+/* 2.4.17 => 2.4.12 */
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17) )
+
+#ifndef __devexit_p
+#define __devexit_p(x) &(x)
+#endif
+
+#endif /* 2.4.17 => 2.4.13 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,18) )
+#define NETIF_MSG_HW 0x2000
+#define NETIF_MSG_WOL 0x4000
+
+#ifndef netif_msg_hw
+#define netif_msg_hw(p) ((p)->msg_enable & NETIF_MSG_HW)
+#endif
+#ifndef netif_msg_wol
+#define netif_msg_wol(p) ((p)->msg_enable & NETIF_MSG_WOL)
+#endif
+#endif /* 2.4.18 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19) ) || \
+ (( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ) && !defined(CONFIG_CRC32))
+#undef ether_crc_le
+#define ether_crc_le(length, data) _kc_ether_crc_le(length, data)
+static inline unsigned _kc_ether_crc_le(int length, unsigned char *data)
+{
+ unsigned int crc = 0xffffffff; /* Initial value. */
+ while (--length >= 0) {
+ unsigned char current_octet = *data++;
+ int bit;
+ for (bit = 8; --bit >= 0; current_octet >>= 1) {
+ if ((crc ^ current_octet) & 1) {
+ crc >>= 1;
+ crc ^= 0xedb88320U;
+ } else
+ crc >>= 1;
+ }
+ }
+ return crc;
+}
+#else /* < 2.4.19 || (>=2.6.0 && !defined(CONFIG_CRC32)) */
+#include <linux/crc32.h>
+#endif /* < 2.4.19 || (>=2.6.0 && !defined(CONFIG_CRC32)) */
+
+/*****************************************************************************/
+/* 2.4.20 => 2.4.19 */
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,20) )
+
+/* we won't support NAPI on less than 2.4.20 */
+#ifdef NAPI
+#undef NAPI
+#undef CONFIG_E1000E_NAPI
+#endif
+
+#endif /* 2.4.20 => 2.4.19 */
+
+/*****************************************************************************/
+/* 2.4.22 => 2.4.17 */
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,22) )
+#define pci_name(x) ((x)->slot_name)
+#endif
+
+/*****************************************************************************/
+/*****************************************************************************/
+/* 2.4.23 => 2.4.22 */
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,23) )
+/*****************************************************************************/
+#ifdef NAPI
+#ifndef netif_poll_disable
+#define netif_poll_disable(x) _kc_netif_poll_disable(x)
+static inline void _kc_netif_poll_disable(struct net_device *netdev)
+{
+ while (test_and_set_bit(__LINK_STATE_RX_SCHED, &netdev->state)) {
+ /* No hurry */
+ current->state = TASK_INTERRUPTIBLE;
+ schedule_timeout(1);
+ }
+}
+#endif
+#ifndef netif_poll_enable
+#define netif_poll_enable(x) _kc_netif_poll_enable(x)
+static inline void _kc_netif_poll_enable(struct net_device *netdev)
+{
+ clear_bit(__LINK_STATE_RX_SCHED, &netdev->state);
+}
+#endif
+#endif /* NAPI */
+#ifndef netif_tx_disable
+#define netif_tx_disable(x) _kc_netif_tx_disable(x)
+static inline void _kc_netif_tx_disable(struct net_device *dev)
+{
+ spin_lock_bh(&dev->xmit_lock);
+ netif_stop_queue(dev);
+ spin_unlock_bh(&dev->xmit_lock);
+}
+#endif
+#else /* 2.4.23 => 2.4.22 */
+#define HAVE_SCTP
+#endif /* 2.4.23 => 2.4.22 */
+
+/*****************************************************************************/
+/* 2.6.4 => 2.6.0 */
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,25) || \
+ ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) && \
+ LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) ) )
+#define ETHTOOL_OPS_COMPAT
+#endif /* 2.6.4 => 2.6.0 */
+
+/*****************************************************************************/
+/* 2.5.71 => 2.4.x */
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,71) )
+#define sk_protocol protocol
+#define pci_get_device pci_find_device
+#endif /* 2.5.70 => 2.4.x */
+
+/*****************************************************************************/
+/* < 2.4.27 or 2.6.0 <= 2.6.5 */
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27) || \
+ ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) && \
+ LINUX_VERSION_CODE < KERNEL_VERSION(2,6,5) ) )
+
+#ifndef netif_msg_init
+#define netif_msg_init _kc_netif_msg_init
+static inline u32 _kc_netif_msg_init(int debug_value,
+ int default_msg_enable_bits)
+{
+ /* use default */
+ if (debug_value < 0 || debug_value >= (sizeof(u32) * 8))
+ return default_msg_enable_bits;
+ if (debug_value == 0) /* no output */
+ return 0;
+ /* set low N bits */
+ return (1 << debug_value) - 1;
+}
+#endif
+
+#endif /* < 2.4.27 or 2.6.0 <= 2.6.5 */
+/*****************************************************************************/
+#if (( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27) ) || \
+ (( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ) && \
+ ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,3) )))
+#define netdev_priv(x) x->priv
+#endif
+
+/*****************************************************************************/
+/* <= 2.5.0 */
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) )
+#include <linux/rtnetlink.h>
+#undef pci_register_driver
+#define pci_register_driver pci_module_init
+
+/*
+ * Most of the dma compat code is copied/modifed from the 2.4.37
+ * /include/linux/libata-compat.h header file
+ */
+/* These definitions mirror those in pci.h, so they can be used
+ * interchangeably with their PCI_ counterparts */
+enum dma_data_direction {
+ DMA_BIDIRECTIONAL = 0,
+ DMA_TO_DEVICE = 1,
+ DMA_FROM_DEVICE = 2,
+ DMA_NONE = 3,
+};
+
+struct device {
+ struct pci_dev pdev;
+};
+
+static inline struct pci_dev *to_pci_dev(struct device *dev)
+{
+ return (struct pci_dev *)dev;
+}
+
+static inline struct device *pci_dev_to_dev(struct pci_dev *pdev)
+{
+ return (struct device *)pdev;
+}
+
+#define pdev_printk(lvl, pdev, fmt, args...) \
+ printk("%s %s: " fmt, lvl, pci_name(pdev), ## args)
+#define dev_err(dev, fmt, args...) \
+ pdev_printk(KERN_ERR, to_pci_dev(dev), fmt, ## args)
+#define dev_info(dev, fmt, args...) \
+ pdev_printk(KERN_INFO, to_pci_dev(dev), fmt, ## args)
+#define dev_warn(dev, fmt, args...) \
+ pdev_printk(KERN_WARNING, to_pci_dev(dev), fmt, ## args)
+
+/* NOTE: dangerous! we ignore the 'gfp' argument */
+#define dma_alloc_coherent(dev,sz,dma,gfp) \
+ pci_alloc_consistent(to_pci_dev(dev),(sz),(dma))
+#define dma_free_coherent(dev,sz,addr,dma_addr) \
+ pci_free_consistent(to_pci_dev(dev),(sz),(addr),(dma_addr))
+
+#define dma_map_page(dev,a,b,c,d) \
+ pci_map_page(to_pci_dev(dev),(a),(b),(c),(d))
+#define dma_unmap_page(dev,a,b,c) \
+ pci_unmap_page(to_pci_dev(dev),(a),(b),(c))
+
+#define dma_map_single(dev,a,b,c) \
+ pci_map_single(to_pci_dev(dev),(a),(b),(c))
+#define dma_unmap_single(dev,a,b,c) \
+ pci_unmap_single(to_pci_dev(dev),(a),(b),(c))
+
+#define dma_sync_single(dev,a,b,c) \
+ pci_dma_sync_single(to_pci_dev(dev),(a),(b),(c))
+
+/* for range just sync everything, that's all the pci API can do */
+#define dma_sync_single_range(dev,addr,off,sz,dir) \
+ pci_dma_sync_single(to_pci_dev(dev),(addr),(off)+(sz),(dir))
+
+#define dma_set_mask(dev,mask) \
+ pci_set_dma_mask(to_pci_dev(dev),(mask))
+
+/* hlist_* code - double linked lists */
+struct hlist_head {
+ struct hlist_node *first;
+};
+
+struct hlist_node {
+ struct hlist_node *next, **pprev;
+};
+
+static inline void __hlist_del(struct hlist_node *n)
+{
+ struct hlist_node *next = n->next;
+ struct hlist_node **pprev = n->pprev;
+ *pprev = next;
+ if (next)
+ next->pprev = pprev;
+}
+
+static inline void hlist_del(struct hlist_node *n)
+{
+ __hlist_del(n);
+ n->next = NULL;
+ n->pprev = NULL;
+}
+
+static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h)
+{
+ struct hlist_node *first = h->first;
+ n->next = first;
+ if (first)
+ first->pprev = &n->next;
+ h->first = n;
+ n->pprev = &h->first;
+}
+
+static inline int hlist_empty(const struct hlist_head *h)
+{
+ return !h->first;
+}
+
+#define HLIST_HEAD_INIT { .first = NULL }
+#define HLIST_HEAD(name) struct hlist_head name = { .first = NULL }
+#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL)
+static inline void INIT_HLIST_NODE(struct hlist_node *h)
+{
+ h->next = NULL;
+ h->pprev = NULL;
+}
+
+#define hlist_entry(ptr, type, member) container_of(ptr,type,member)
+
+#define hlist_for_each_entry(tpos, pos, head, member) \
+ for (pos = (head)->first; \
+ pos && ({ prefetch(pos->next); 1;}) && \
+ ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
+ pos = pos->next)
+
+#define hlist_for_each_entry_safe(tpos, pos, n, head, member) \
+ for (pos = (head)->first; \
+ pos && ({ n = pos->next; 1; }) && \
+ ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
+ pos = n)
+
+#ifndef might_sleep
+#define might_sleep()
+#endif
+#else
+static inline struct device *pci_dev_to_dev(struct pci_dev *pdev)
+{
+ return &pdev->dev;
+}
+#endif /* <= 2.5.0 */
+
+/*****************************************************************************/
+/* 2.5.28 => 2.4.23 */
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,28) )
+
+static inline void _kc_synchronize_irq(void)
+{
+ synchronize_irq();
+}
+
+#undef synchronize_irq
+#define synchronize_irq(X) _kc_synchronize_irq()
+
+#include <linux/tqueue.h>
+#define work_struct tq_struct
+#undef INIT_WORK
+#define INIT_WORK(a,b) INIT_TQUEUE(a,(void (*)(void *))b,a)
+#undef container_of
+#define container_of list_entry
+#define schedule_work schedule_task
+#define flush_scheduled_work flush_scheduled_tasks
+#define cancel_work_sync(x) flush_scheduled_work()
+
+#endif /* 2.5.28 => 2.4.17 */
+
+/*****************************************************************************/
+/* 2.6.0 => 2.5.28 */
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) )
+#undef get_cpu
+#define get_cpu() smp_processor_id()
+#undef put_cpu
+#define put_cpu() do { } while(0)
+#define MODULE_INFO(version, _version)
+#ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
+#define CONFIG_E1000_DISABLE_PACKET_SPLIT 1
+#endif
+#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT
+#define CONFIG_IGB_DISABLE_PACKET_SPLIT 1
+#endif
+
+#define dma_set_coherent_mask(dev,mask) 1
+
+#undef dev_put
+#define dev_put(dev) __dev_put(dev)
+
+#ifndef skb_fill_page_desc
+#define skb_fill_page_desc _kc_skb_fill_page_desc
+extern void _kc_skb_fill_page_desc(struct sk_buff *skb, int i,
+ struct page *page, int off, int size);
+#endif
+
+#undef ALIGN
+#define ALIGN(x,a) (((x)+(a)-1)&~((a)-1))
+
+#ifndef page_count
+#define page_count(p) atomic_read(&(p)->count)
+#endif
+
+#ifdef MAX_NUMNODES
+#undef MAX_NUMNODES
+#endif
+#define MAX_NUMNODES 1
+
+/* find_first_bit and find_next bit are not defined for most
+ * 2.4 kernels (except for the redhat 2.4.21 kernels
+ */
+#include <linux/bitops.h>
+#define BITOP_WORD(nr) ((nr) / BITS_PER_LONG)
+#undef find_next_bit
+#define find_next_bit _kc_find_next_bit
+extern unsigned long _kc_find_next_bit(const unsigned long *addr,
+ unsigned long size,
+ unsigned long offset);
+#define find_first_bit(addr, size) find_next_bit((addr), (size), 0)
+
+#ifndef netdev_name
+static inline const char *_kc_netdev_name(const struct net_device *dev)
+{
+ if (strchr(dev->name, '%'))
+ return "(unregistered net_device)";
+ return dev->name;
+}
+
+#define netdev_name(netdev) _kc_netdev_name(netdev)
+#endif /* netdev_name */
+
+#ifndef strlcpy
+#define strlcpy _kc_strlcpy
+extern size_t _kc_strlcpy(char *dest, const char *src, size_t size);
+#endif /* strlcpy */
+
+#endif /* 2.6.0 => 2.5.28 */
+
+/*****************************************************************************/
+/* 2.6.4 => 2.6.0 */
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) )
+#define MODULE_VERSION(_version) MODULE_INFO(version, _version)
+#endif /* 2.6.4 => 2.6.0 */
+
+/*****************************************************************************/
+/* 2.6.5 => 2.6.0 */
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,5) )
+#define dma_sync_single_for_cpu dma_sync_single
+#define dma_sync_single_for_device dma_sync_single
+#define dma_sync_single_range_for_cpu dma_sync_single_range
+#define dma_sync_single_range_for_device dma_sync_single_range
+#ifndef pci_dma_mapping_error
+#define pci_dma_mapping_error _kc_pci_dma_mapping_error
+static inline int _kc_pci_dma_mapping_error(dma_addr_t dma_addr)
+{
+ return dma_addr == 0;
+}
+#endif
+#endif /* 2.6.5 => 2.6.0 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) )
+extern int _kc_scnprintf(char *buf, size_t size, const char *fmt, ...);
+#define scnprintf(buf, size, fmt, args...) _kc_scnprintf(buf, size, fmt, ##args)
+#endif /* < 2.6.4 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,6) )
+/* taken from 2.6 include/linux/bitmap.h */
+#undef bitmap_zero
+#define bitmap_zero _kc_bitmap_zero
+static inline void _kc_bitmap_zero(unsigned long *dst, int nbits)
+{
+ if (nbits <= BITS_PER_LONG)
+ *dst = 0UL;
+ else {
+ int len = BITS_TO_LONGS(nbits) * sizeof(unsigned long);
+ memset(dst, 0, len);
+ }
+}
+
+#define random_ether_addr _kc_random_ether_addr
+static inline void _kc_random_ether_addr(u8 *addr)
+{
+ get_random_bytes(addr, ETH_ALEN);
+ addr[0] &= 0xfe; /* clear multicast */
+ addr[0] |= 0x02; /* set local assignment */
+}
+
+#define page_to_nid(x) 0
+
+#endif /* < 2.6.6 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,7) )
+#undef if_mii
+#define if_mii _kc_if_mii
+static inline struct mii_ioctl_data *_kc_if_mii(struct ifreq *rq)
+{
+ return (struct mii_ioctl_data *)&rq->ifr_ifru;
+}
+
+#ifndef __force
+#define __force
+#endif
+#endif /* < 2.6.7 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,8) )
+#ifndef PCI_EXP_DEVCTL
+#define PCI_EXP_DEVCTL 8
+#endif
+#ifndef PCI_EXP_DEVCTL_CERE
+#define PCI_EXP_DEVCTL_CERE 0x0001
+#endif
+#define msleep(x) do { set_current_state(TASK_UNINTERRUPTIBLE); \
+ schedule_timeout((x * HZ)/1000 + 2); \
+ } while (0)
+
+#endif /* < 2.6.8 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9))
+#include <net/dsfield.h>
+#define __iomem
+
+#ifndef kcalloc
+#define kcalloc(n, size, flags) _kc_kzalloc(((n) * (size)), flags)
+extern void *_kc_kzalloc(size_t size, int flags);
+#endif
+#define MSEC_PER_SEC 1000L
+static inline unsigned int _kc_jiffies_to_msecs(const unsigned long j)
+{
+#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)
+ return (MSEC_PER_SEC / HZ) * j;
+#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC)
+ return (j + (HZ / MSEC_PER_SEC) - 1) / (HZ / MSEC_PER_SEC);
+#else
+ return (j * MSEC_PER_SEC) / HZ;
+#endif
+}
+
+static inline unsigned long _kc_msecs_to_jiffies(const unsigned int m)
+{
+ if (m > _kc_jiffies_to_msecs(MAX_JIFFY_OFFSET))
+ return MAX_JIFFY_OFFSET;
+#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)
+ return (m + (MSEC_PER_SEC / HZ) - 1) / (MSEC_PER_SEC / HZ);
+#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC)
+ return m * (HZ / MSEC_PER_SEC);
+#else
+ return (m * HZ + MSEC_PER_SEC - 1) / MSEC_PER_SEC;
+#endif
+}
+
+#define msleep_interruptible _kc_msleep_interruptible
+static inline unsigned long _kc_msleep_interruptible(unsigned int msecs)
+{
+ unsigned long timeout = _kc_msecs_to_jiffies(msecs) + 1;
+
+ while (timeout && !signal_pending(current)) {
+ __set_current_state(TASK_INTERRUPTIBLE);
+ timeout = schedule_timeout(timeout);
+ }
+ return _kc_jiffies_to_msecs(timeout);
+}
+
+/* Basic mode control register. */
+#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */
+
+#ifndef __le16
+#define __le16 u16
+#endif
+#ifndef __le32
+#define __le32 u32
+#endif
+#ifndef __le64
+#define __le64 u64
+#endif
+#ifndef __be16
+#define __be16 u16
+#endif
+#ifndef __be32
+#define __be32 u32
+#endif
+#ifndef __be64
+#define __be64 u64
+#endif
+
+static inline struct vlan_ethhdr *vlan_eth_hdr(const struct sk_buff *skb)
+{
+ return (struct vlan_ethhdr *)skb->mac.raw;
+}
+
+/* Wake-On-Lan options. */
+#define WAKE_PHY (1 << 0)
+#define WAKE_UCAST (1 << 1)
+#define WAKE_MCAST (1 << 2)
+#define WAKE_BCAST (1 << 3)
+#define WAKE_ARP (1 << 4)
+#define WAKE_MAGIC (1 << 5)
+#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */
+
+#define skb_header_pointer _kc_skb_header_pointer
+static inline void *_kc_skb_header_pointer(const struct sk_buff *skb,
+ int offset, int len, void *buffer)
+{
+ int hlen = skb_headlen(skb);
+
+ if (hlen - offset >= len)
+ return skb->data + offset;
+
+#ifdef MAX_SKB_FRAGS
+ if (skb_copy_bits(skb, offset, buffer, len) < 0)
+ return NULL;
+
+ return buffer;
+#else
+ return NULL;
+#endif
+
+#ifndef NETDEV_TX_OK
+#define NETDEV_TX_OK 0
+#endif
+#ifndef NETDEV_TX_BUSY
+#define NETDEV_TX_BUSY 1
+#endif
+#ifndef NETDEV_TX_LOCKED
+#define NETDEV_TX_LOCKED -1
+#endif
+}
+
+#ifndef __bitwise
+#define __bitwise
+#endif
+#endif /* < 2.6.9 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) )
+#ifdef module_param_array_named
+#undef module_param_array_named
+#define module_param_array_named(name, array, type, nump, perm) \
+ static struct kparam_array __param_arr_##name \
+ = { ARRAY_SIZE(array), nump, param_set_##type, param_get_##type, \
+ sizeof(array[0]), array }; \
+ module_param_call(name, param_array_set, param_array_get, \
+ &__param_arr_##name, perm)
+#endif /* module_param_array_named */
+/*
+ * num_online is broken for all < 2.6.10 kernels. This is needed to support
+ * Node module parameter of ixgbe.
+ */
+#undef num_online_nodes
+#define num_online_nodes(n) 1
+extern DECLARE_BITMAP(_kcompat_node_online_map, MAX_NUMNODES);
+#undef node_online_map
+#define node_online_map _kcompat_node_online_map
+#endif /* < 2.6.10 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) )
+#define PCI_D0 0
+#define PCI_D1 1
+#define PCI_D2 2
+#define PCI_D3hot 3
+#define PCI_D3cold 4
+typedef int pci_power_t;
+#define pci_choose_state(pdev,state) state
+#define PMSG_SUSPEND 3
+#define PCI_EXP_LNKCTL 16
+
+#undef NETIF_F_LLTX
+
+#ifndef ARCH_HAS_PREFETCH
+#define prefetch(X)
+#endif
+
+#ifndef NET_IP_ALIGN
+#define NET_IP_ALIGN 2
+#endif
+
+#define KC_USEC_PER_SEC 1000000L
+#define usecs_to_jiffies _kc_usecs_to_jiffies
+static inline unsigned int _kc_jiffies_to_usecs(const unsigned long j)
+{
+#if HZ <= KC_USEC_PER_SEC && !(KC_USEC_PER_SEC % HZ)
+ return (KC_USEC_PER_SEC / HZ) * j;
+#elif HZ > KC_USEC_PER_SEC && !(HZ % KC_USEC_PER_SEC)
+ return (j + (HZ / KC_USEC_PER_SEC) - 1) / (HZ / KC_USEC_PER_SEC);
+#else
+ return (j * KC_USEC_PER_SEC) / HZ;
+#endif
+}
+
+static inline unsigned long _kc_usecs_to_jiffies(const unsigned int m)
+{
+ if (m > _kc_jiffies_to_usecs(MAX_JIFFY_OFFSET))
+ return MAX_JIFFY_OFFSET;
+#if HZ <= KC_USEC_PER_SEC && !(KC_USEC_PER_SEC % HZ)
+ return (m + (KC_USEC_PER_SEC / HZ) - 1) / (KC_USEC_PER_SEC / HZ);
+#elif HZ > KC_USEC_PER_SEC && !(HZ % KC_USEC_PER_SEC)
+ return m * (HZ / KC_USEC_PER_SEC);
+#else
+ return (m * HZ + KC_USEC_PER_SEC - 1) / KC_USEC_PER_SEC;
+#endif
+}
+#endif /* < 2.6.11 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,12) )
+#include <linux/reboot.h>
+#define USE_REBOOT_NOTIFIER
+
+/* Generic MII registers. */
+#define MII_CTRL1000 0x09 /* 1000BASE-T control */
+#define MII_STAT1000 0x0a /* 1000BASE-T status */
+/* Advertisement control register. */
+#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */
+#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymmetric pause */
+/* 1000BASE-T Control register */
+#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */
+#ifndef is_zero_ether_addr
+#define is_zero_ether_addr _kc_is_zero_ether_addr
+static inline int _kc_is_zero_ether_addr(const u8 *addr)
+{
+ return !(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5]);
+}
+#endif /* is_zero_ether_addr */
+#ifndef is_multicast_ether_addr
+#define is_multicast_ether_addr _kc_is_multicast_ether_addr
+static inline int _kc_is_multicast_ether_addr(const u8 *addr)
+{
+ return addr[0] & 0x01;
+}
+#endif /* is_multicast_ether_addr */
+#endif /* < 2.6.12 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13) )
+#ifndef kstrdup
+#define kstrdup _kc_kstrdup
+extern char *_kc_kstrdup(const char *s, unsigned int gfp);
+#endif
+#endif /* < 2.6.13 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14) )
+#define pm_message_t u32
+#ifndef kzalloc
+#define kzalloc _kc_kzalloc
+extern void *_kc_kzalloc(size_t size, int flags);
+#endif
+
+/* Generic MII registers. */
+#define MII_ESTATUS 0x0f /* Extended Status */
+/* Basic mode status register. */
+#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */
+/* Extended status register. */
+#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */
+#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */
+
+#define ADVERTISED_Pause (1 << 13)
+#define ADVERTISED_Asym_Pause (1 << 14)
+
+#if (!(RHEL_RELEASE_CODE && \
+ (RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(4,3)) && \
+ (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0))))
+#if ((LINUX_VERSION_CODE == KERNEL_VERSION(2,6,9)) && !defined(gfp_t))
+#define gfp_t unsigned
+#else
+typedef unsigned gfp_t;
+#endif
+#endif /* !RHEL4.3->RHEL5.0 */
+
+#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,9) )
+#ifdef CONFIG_X86_64
+#define dma_sync_single_range_for_cpu(dev, dma_handle, offset, size, dir) \
+ dma_sync_single_for_cpu(dev, dma_handle, size, dir)
+#define dma_sync_single_range_for_device(dev, dma_handle, offset, size, dir) \
+ dma_sync_single_for_device(dev, dma_handle, size, dir)
+#endif
+#endif
+#endif /* < 2.6.14 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15) )
+#ifndef vmalloc_node
+#define vmalloc_node(a,b) vmalloc(a)
+#endif /* vmalloc_node */
+
+#define setup_timer(_timer, _function, _data) \
+do { \
+ (_timer)->function = _function; \
+ (_timer)->data = _data; \
+ init_timer(_timer); \
+} while (0)
+#ifndef device_can_wakeup
+#define device_can_wakeup(dev) (1)
+#endif
+#ifndef device_set_wakeup_enable
+#define device_set_wakeup_enable(dev, val) do{}while(0)
+#endif
+#ifndef device_init_wakeup
+#define device_init_wakeup(dev,val) do {} while (0)
+#endif
+static inline unsigned _kc_compare_ether_addr(const u8 *addr1, const u8 *addr2)
+{
+ const u16 *a = (const u16 *)addr1;
+ const u16 *b = (const u16 *)addr2;
+
+ return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) != 0;
+}
+
+#undef compare_ether_addr
+#define compare_ether_addr(addr1, addr2) _kc_compare_ether_addr(addr1, addr2)
+#endif /* < 2.6.15 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16) )
+#undef DEFINE_MUTEX
+#define DEFINE_MUTEX(x) DECLARE_MUTEX(x)
+#define mutex_lock(x) down_interruptible(x)
+#define mutex_unlock(x) up(x)
+
+#ifndef ____cacheline_internodealigned_in_smp
+#ifdef CONFIG_SMP
+#define ____cacheline_internodealigned_in_smp ____cacheline_aligned_in_smp
+#else
+#define ____cacheline_internodealigned_in_smp
+#endif /* CONFIG_SMP */
+#endif /* ____cacheline_internodealigned_in_smp */
+#undef HAVE_PCI_ERS
+#else /* 2.6.16 and above */
+#undef HAVE_PCI_ERS
+#define HAVE_PCI_ERS
+#endif /* < 2.6.16 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17) )
+#ifndef first_online_node
+#define first_online_node 0
+#endif
+#ifndef NET_SKB_PAD
+#define NET_SKB_PAD 16
+#endif
+#endif /* < 2.6.17 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) )
+
+#ifndef IRQ_HANDLED
+#define irqreturn_t void
+#define IRQ_HANDLED
+#define IRQ_NONE
+#endif
+
+#ifndef IRQF_PROBE_SHARED
+#ifdef SA_PROBEIRQ
+#define IRQF_PROBE_SHARED SA_PROBEIRQ
+#else
+#define IRQF_PROBE_SHARED 0
+#endif
+#endif
+
+#ifndef IRQF_SHARED
+#define IRQF_SHARED SA_SHIRQ
+#endif
+
+#ifndef ARRAY_SIZE
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+#endif
+
+#ifndef FIELD_SIZEOF
+#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f))
+#endif
+
+#ifndef skb_is_gso
+#ifdef NETIF_F_TSO
+#define skb_is_gso _kc_skb_is_gso
+static inline int _kc_skb_is_gso(const struct sk_buff *skb)
+{
+ return skb_shinfo(skb)->gso_size;
+}
+#else
+#define skb_is_gso(a) 0
+#endif
+#endif
+
+#ifndef resource_size_t
+#define resource_size_t unsigned long
+#endif
+
+#ifdef skb_pad
+#undef skb_pad
+#endif
+#define skb_pad(x,y) _kc_skb_pad(x, y)
+int _kc_skb_pad(struct sk_buff *skb, int pad);
+#ifdef skb_padto
+#undef skb_padto
+#endif
+#define skb_padto(x,y) _kc_skb_padto(x, y)
+static inline int _kc_skb_padto(struct sk_buff *skb, unsigned int len)
+{
+ unsigned int size = skb->len;
+ if (likely(size >= len))
+ return 0;
+ return _kc_skb_pad(skb, len - size);
+}
+
+#ifndef DECLARE_PCI_UNMAP_ADDR
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
+ dma_addr_t ADDR_NAME
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
+ u32 LEN_NAME
+#define pci_unmap_addr(PTR, ADDR_NAME) \
+ ((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
+ (((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME) \
+ ((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
+ (((PTR)->LEN_NAME) = (VAL))
+#endif /* DECLARE_PCI_UNMAP_ADDR */
+#endif /* < 2.6.18 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) )
+
+#ifndef DIV_ROUND_UP
+#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
+#endif
+#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) )
+#if (!((RHEL_RELEASE_CODE && \
+ ((RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(4,4) && \
+ RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0)) || \
+ (RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,0)))) || \
+ (AX_RELEASE_CODE && AX_RELEASE_CODE > AX_RELEASE_VERSION(3,0))))
+typedef irqreturn_t(*irq_handler_t) (int, void *, struct pt_regs *);
+#endif
+#if (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(6,0))
+#undef CONFIG_INET_LRO
+#undef CONFIG_INET_LRO_MODULE
+#ifdef IXGBE_FCOE
+#undef CONFIG_FCOE
+#undef CONFIG_FCOE_MODULE
+#endif /* IXGBE_FCOE */
+#endif
+typedef irqreturn_t(*new_handler_t) (int, void *);
+static inline irqreturn_t _kc_request_irq(unsigned int irq,
+ new_handler_t handler,
+ unsigned long flags,
+ const char *devname, void *dev_id)
+#else /* 2.4.x */
+typedef void (*irq_handler_t) (int, void *, struct pt_regs *);
+typedef void (*new_handler_t) (int, void *);
+static inline int _kc_request_irq(unsigned int irq, new_handler_t handler,
+ unsigned long flags, const char *devname,
+ void *dev_id)
+#endif /* >= 2.5.x */
+{
+ irq_handler_t new_handler = (irq_handler_t) handler;
+ return request_irq(irq, new_handler, flags, devname, dev_id);
+}
+
+#undef request_irq
+#define request_irq(irq, handler, flags, devname, dev_id) _kc_request_irq((irq), (handler), (flags), (devname), (dev_id))
+
+#define irq_handler_t new_handler_t
+/* pci_restore_state and pci_save_state handles MSI/PCIE from 2.6.19 */
+#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,4)))
+#define PCIE_CONFIG_SPACE_LEN 256
+#define PCI_CONFIG_SPACE_LEN 64
+#define PCIE_LINK_STATUS 0x12
+#define pci_config_space_ich8lan() { \
+ if (adapter->flags & FLAG_IS_ICH) \
+ size = PCIE_CONFIG_SPACE_LEN; \
+}
+#undef pci_save_state
+extern int _kc_pci_save_state(struct pci_dev *);
+#define pci_save_state(pdev) _kc_pci_save_state(pdev)
+#undef pci_restore_state
+extern void _kc_pci_restore_state(struct pci_dev *);
+#define pci_restore_state(pdev) _kc_pci_restore_state(pdev)
+#endif /* !(RHEL_RELEASE_CODE >= RHEL 5.4) */
+
+#ifdef HAVE_PCI_ERS
+#undef free_netdev
+extern void _kc_free_netdev(struct net_device *);
+#define free_netdev(netdev) _kc_free_netdev(netdev)
+#endif
+static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev)
+{
+ return 0;
+}
+
+#define pci_disable_pcie_error_reporting(dev) do {} while (0)
+#define pci_cleanup_aer_uncorrect_error_status(dev) do {} while (0)
+
+extern void *_kc_kmemdup(const void *src, size_t len, unsigned gfp);
+#define kmemdup(src, len, gfp) _kc_kmemdup(src, len, gfp)
+#ifndef bool
+#define bool _Bool
+#define true 1
+#define false 0
+#endif
+#else /* 2.6.19 */
+#include <linux/aer.h>
+#include <linux/string.h>
+#endif /* < 2.6.19 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) )
+#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,28) )
+#undef INIT_WORK
+#define INIT_WORK(_work, _func) \
+do { \
+ INIT_LIST_HEAD(&(_work)->entry); \
+ (_work)->pending = 0; \
+ (_work)->func = (void (*)(void *))_func; \
+ (_work)->data = _work; \
+ init_timer(&(_work)->timer); \
+} while (0)
+#endif
+
+#ifndef PCI_VDEVICE
+#define PCI_VDEVICE(ven, dev) \
+ PCI_VENDOR_ID_##ven, (dev), \
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0
+#endif
+
+#ifndef round_jiffies
+#define round_jiffies(x) x
+#endif
+
+#define csum_offset csum
+
+#define HAVE_EARLY_VMALLOC_NODE
+#define dev_to_node(dev) -1
+#undef set_dev_node
+/* remove compiler warning with b=b, for unused variable */
+#define set_dev_node(a, b) do { (b) = (b); } while(0)
+
+#if (!(RHEL_RELEASE_CODE && \
+ (((RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(4,7)) && \
+ (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0))) || \
+ (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,6)))) && \
+ !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(10,2,0)))
+typedef __u16 __bitwise __sum16;
+typedef __u32 __bitwise __wsum;
+#endif
+
+#if (!(RHEL_RELEASE_CODE && \
+ (((RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(4,7)) && \
+ (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0))) || \
+ (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,4)))) && \
+ !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(10,2,0)))
+static inline __wsum csum_unfold(__sum16 n)
+{
+ return (__force __wsum) n;
+}
+#endif
+
+#else /* < 2.6.20 */
+#define HAVE_DEVICE_NUMA_NODE
+#endif /* < 2.6.20 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21) )
+#define to_net_dev(class) container_of(class, struct net_device, class_dev)
+#define NETDEV_CLASS_DEV
+#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,5)))
+#define vlan_group_get_device(vg, id) (vg->vlan_devices[id])
+#define vlan_group_set_device(vg, id, dev) \
+ do { \
+ if (vg) vg->vlan_devices[id] = dev; \
+ } while (0)
+#endif /* !(RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,5)) */
+#define pci_channel_offline(pdev) (pdev->error_state && \
+ pdev->error_state != pci_channel_io_normal)
+#define pci_request_selected_regions(pdev, bars, name) \
+ pci_request_regions(pdev, name)
+#define pci_release_selected_regions(pdev, bars) pci_release_regions(pdev);
+#endif /* < 2.6.21 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) )
+#define tcp_hdr(skb) (skb->h.th)
+#define tcp_hdrlen(skb) (skb->h.th->doff << 2)
+#define skb_transport_offset(skb) (skb->h.raw - skb->data)
+#define skb_transport_header(skb) (skb->h.raw)
+#define ipv6_hdr(skb) (skb->nh.ipv6h)
+#define ip_hdr(skb) (skb->nh.iph)
+#define skb_network_offset(skb) (skb->nh.raw - skb->data)
+#define skb_network_header(skb) (skb->nh.raw)
+#define skb_tail_pointer(skb) skb->tail
+#define skb_reset_tail_pointer(skb) \
+ do { \
+ skb->tail = skb->data; \
+ } while (0)
+#define skb_copy_to_linear_data(skb, from, len) \
+ memcpy(skb->data, from, len)
+#define skb_copy_to_linear_data_offset(skb, offset, from, len) \
+ memcpy(skb->data + offset, from, len)
+#define skb_network_header_len(skb) (skb->h.raw - skb->nh.raw)
+#define pci_register_driver pci_module_init
+#define skb_mac_header(skb) skb->mac.raw
+
+#ifdef NETIF_F_MULTI_QUEUE
+#ifndef alloc_etherdev_mq
+#define alloc_etherdev_mq(_a, _b) alloc_etherdev(_a)
+#endif
+#endif /* NETIF_F_MULTI_QUEUE */
+
+#ifndef ETH_FCS_LEN
+#define ETH_FCS_LEN 4
+#endif
+#define cancel_work_sync(x) flush_scheduled_work()
+#ifndef udp_hdr
+#define udp_hdr _udp_hdr
+static inline struct udphdr *_udp_hdr(const struct sk_buff *skb)
+{
+ return (struct udphdr *)skb_transport_header(skb);
+}
+#endif
+
+#ifdef cpu_to_be16
+#undef cpu_to_be16
+#endif
+#define cpu_to_be16(x) __constant_htons(x)
+
+#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,1)))
+enum {
+ DUMP_PREFIX_NONE,
+ DUMP_PREFIX_ADDRESS,
+ DUMP_PREFIX_OFFSET
+};
+#endif /* !(RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,1)) */
+#ifndef hex_asc
+#define hex_asc(x) "0123456789abcdef"[x]
+#endif
+#include <linux/ctype.h>
+extern void _kc_print_hex_dump(const char *level, const char *prefix_str,
+ int prefix_type, int rowsize, int groupsize,
+ const void *buf, size_t len, bool ascii);
+#define print_hex_dump(lvl, s, t, r, g, b, l, a) \
+ _kc_print_hex_dump(lvl, s, t, r, g, b, l, a)
+#else /* 2.6.22 */
+#define ETH_TYPE_TRANS_SETS_DEV
+#define HAVE_NETDEV_STATS_IN_NETDEV
+#endif /* < 2.6.22 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,22) )
+#undef SET_MODULE_OWNER
+#define SET_MODULE_OWNER(dev) do { } while (0)
+#endif /* > 2.6.22 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) )
+#define netif_subqueue_stopped(_a, _b) 0
+#ifndef PTR_ALIGN
+#define PTR_ALIGN(p, a) ((typeof(p))ALIGN((unsigned long)(p), (a)))
+#endif
+
+#ifndef CONFIG_PM_SLEEP
+#define CONFIG_PM_SLEEP CONFIG_PM
+#endif
+
+#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13) )
+#define HAVE_ETHTOOL_GET_PERM_ADDR
+#endif /* 2.6.14 through 2.6.22 */
+#endif /* < 2.6.23 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) )
+#ifndef ETH_FLAG_LRO
+#define ETH_FLAG_LRO NETIF_F_LRO
+#endif
+
+/* if GRO is supported then the napi struct must already exist */
+#ifndef NETIF_F_GRO
+/* NAPI API changes in 2.6.24 break everything */
+struct napi_struct {
+ /* used to look up the real NAPI polling routine */
+ int (*poll) (struct napi_struct *, int);
+ struct net_device *dev;
+ int weight;
+};
+#endif
+
+#ifdef NAPI
+extern int __kc_adapter_clean(struct net_device *, int *);
+#define napi_to_poll_dev(_napi) (_napi)->dev
+#define netif_napi_add(_netdev, _napi, _poll, _weight) \
+ do { \
+ struct napi_struct *__napi = (_napi); \
+ _netdev->poll = &(__kc_adapter_clean); \
+ _netdev->weight = (_weight); \
+ __napi->poll = &(_poll); \
+ __napi->weight = (_weight); \
+ __napi->dev = (_netdev); \
+ netif_poll_disable(_netdev); \
+ } while (0)
+#define netif_napi_del(_a) do {} while (0)
+#define napi_schedule_prep(_napi) netif_rx_schedule_prep((_napi)->dev)
+#define napi_schedule(_napi) netif_rx_schedule((_napi)->dev)
+#define napi_enable(_napi) netif_poll_enable(napi_to_poll_dev(_napi))
+#define napi_disable(_napi) netif_poll_disable(napi_to_poll_dev(_napi))
+#define __napi_schedule(_napi) __netif_rx_schedule(napi_to_poll_dev(_napi))
+#ifndef NETIF_F_GRO
+#define napi_complete(_napi) netif_rx_complete(napi_to_poll_dev(_napi))
+#else
+#define napi_complete(_napi) \
+ do { \
+ napi_gro_flush(_napi); \
+ netif_rx_complete(napi_to_poll_dev(_napi)); \
+ } while (0)
+#endif /* NETIF_F_GRO */
+#else /* NAPI */
+#define netif_napi_add(_netdev, _napi, _poll, _weight) \
+ do { \
+ struct napi_struct *__napi = _napi; \
+ _netdev->poll = &(_poll); \
+ _netdev->weight = (_weight); \
+ __napi->poll = &(_poll); \
+ __napi->weight = (_weight); \
+ __napi->dev = (_netdev); \
+ } while (0)
+#define netif_napi_del(_a) do {} while (0)
+#endif /* NAPI */
+
+#undef dev_get_by_name
+#define dev_get_by_name(_a, _b) dev_get_by_name(_b)
+#define __netif_subqueue_stopped(_a, _b) netif_subqueue_stopped(_a, _b)
+#ifndef DMA_BIT_MASK
+#define DMA_BIT_MASK(n) (((n) == 64) ? DMA_64BIT_MASK : ((1ULL<<(n))-1))
+#endif
+
+#ifdef NETIF_F_TSO6
+#define skb_is_gso_v6 _kc_skb_is_gso_v6
+static inline int _kc_skb_is_gso_v6(const struct sk_buff *skb)
+{
+ return skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6;
+}
+#endif /* NETIF_F_TSO6 */
+
+#ifndef KERN_CONT
+#define KERN_CONT ""
+#endif
+#else /* < 2.6.24 */
+#define HAVE_ETHTOOL_GET_SSET_COUNT
+#define HAVE_NETDEV_NAPI_LIST
+#endif /* < 2.6.24 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,24) )
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0) )
+#include <linux/pm_qos_params.h>
+#else /* >= 3.2.0 */
+#include <linux/pm_qos.h>
+#endif /* else >= 3.2.0 */
+#endif /* > 2.6.24 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25) )
+#define PM_QOS_CPU_DMA_LATENCY 1
+
+#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18) )
+#include <linux/latency.h>
+#define PM_QOS_DEFAULT_VALUE INFINITE_LATENCY
+#define pm_qos_add_requirement(pm_qos_class, name, value) \
+ set_acceptable_latency(name, value)
+#define pm_qos_remove_requirement(pm_qos_class, name) \
+ remove_acceptable_latency(name)
+#define pm_qos_update_requirement(pm_qos_class, name, value) \
+ modify_acceptable_latency(name, value)
+#else
+#define PM_QOS_DEFAULT_VALUE -1
+#define pm_qos_add_requirement(pm_qos_class, name, value)
+#define pm_qos_remove_requirement(pm_qos_class, name)
+#define pm_qos_update_requirement(pm_qos_class, name, value) { \
+ if (value != PM_QOS_DEFAULT_VALUE) { \
+ printk(KERN_WARNING "%s: unable to set PM QoS requirement\n", \
+ pci_name(adapter->pdev)); \
+ } \
+}
+
+#endif /* > 2.6.18 */
+
+#define pci_enable_device_mem(pdev) pci_enable_device(pdev)
+
+#ifndef DEFINE_PCI_DEVICE_TABLE
+#define DEFINE_PCI_DEVICE_TABLE(_table) struct pci_device_id _table[]
+#endif /* DEFINE_PCI_DEVICE_TABLE */
+
+#else /* < 2.6.25 */
+
+#endif /* < 2.6.25 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) )
+#ifndef clamp_t
+#define clamp_t(type, val, min, max) ({ \
+ type __val = (val); \
+ type __min = (min); \
+ type __max = (max); \
+ __val = __val < __min ? __min : __val; \
+ __val > __max ? __max : __val; })
+#endif /* clamp_t */
+#undef kzalloc_node
+#define kzalloc_node(_size, _flags, _node) kzalloc(_size, _flags)
+
+extern void _kc_pci_disable_link_state(struct pci_dev *dev, int state);
+#define pci_disable_link_state(p, s) _kc_pci_disable_link_state(p, s)
+#else /* < 2.6.26 */
+#include <linux/pci-aspm.h>
+#define HAVE_NETDEV_VLAN_FEATURES
+#endif /* < 2.6.26 */
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27) )
+static inline void _kc_ethtool_cmd_speed_set(struct ethtool_cmd *ep,
+ __u32 speed)
+{
+ ep->speed = (__u16) speed;
+ /* ep->speed_hi = (__u16)(speed >> 16); */
+}
+
+#define ethtool_cmd_speed_set _kc_ethtool_cmd_speed_set
+
+static inline __u32 _kc_ethtool_cmd_speed(struct ethtool_cmd *ep)
+{
+ /* no speed_hi before 2.6.27, and probably no need for it yet */
+ return (__u32) ep->speed;
+}
+
+#define ethtool_cmd_speed _kc_ethtool_cmd_speed
+
+#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15) )
+#if ((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)) && defined(CONFIG_PM))
+#define ANCIENT_PM 1
+#elif ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)) && \
+ (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)) && \
+ defined(CONFIG_PM_SLEEP))
+#define NEWER_PM 1
+#endif
+#if defined(ANCIENT_PM) || defined(NEWER_PM)
+#undef device_set_wakeup_enable
+#define device_set_wakeup_enable(dev, val) \
+ do { \
+ u16 pmc = 0; \
+ int pm = pci_find_capability(adapter->pdev, PCI_CAP_ID_PM); \
+ if (pm) { \
+ pci_read_config_word(adapter->pdev, pm + PCI_PM_PMC, \
+ &pmc); \
+ } \
+ (dev)->power.can_wakeup = !!(pmc >> 11); \
+ (dev)->power.should_wakeup = (val && (pmc >> 11)); \
+ } while (0)
+#endif /* 2.6.15-2.6.22 and CONFIG_PM or 2.6.23-2.6.25 and CONFIG_PM_SLEEP */
+#endif /* 2.6.15 through 2.6.27 */
+#ifndef netif_napi_del
+#define netif_napi_del(_a) do {} while (0)
+#ifdef NAPI
+#ifdef CONFIG_NETPOLL
+#undef netif_napi_del
+#define netif_napi_del(_a) list_del(&(_a)->dev_list);
+#endif
+#endif
+#endif /* netif_napi_del */
+#ifdef dma_mapping_error
+#undef dma_mapping_error
+#endif
+#define dma_mapping_error(dev, dma_addr) pci_dma_mapping_error(dma_addr)
+
+#ifdef HAVE_TX_MQ
+extern void _kc_netif_tx_stop_all_queues(struct net_device *);
+extern void _kc_netif_tx_wake_all_queues(struct net_device *);
+extern void _kc_netif_tx_start_all_queues(struct net_device *);
+#define netif_tx_stop_all_queues(a) _kc_netif_tx_stop_all_queues(a)
+#define netif_tx_wake_all_queues(a) _kc_netif_tx_wake_all_queues(a)
+#define netif_tx_start_all_queues(a) _kc_netif_tx_start_all_queues(a)
+#undef netif_stop_subqueue
+#define netif_stop_subqueue(_ndev,_qi) do { \
+ if (netif_is_multiqueue((_ndev))) \
+ netif_stop_subqueue((_ndev), (_qi)); \
+ else \
+ netif_stop_queue((_ndev)); \
+ } while (0)
+#undef netif_start_subqueue
+#define netif_start_subqueue(_ndev,_qi) do { \
+ if (netif_is_multiqueue((_ndev))) \
+ netif_start_subqueue((_ndev), (_qi)); \
+ else \
+ netif_start_queue((_ndev)); \
+ } while (0)
+#else /* HAVE_TX_MQ */
+#define netif_tx_stop_all_queues(a) netif_stop_queue(a)
+#define netif_tx_wake_all_queues(a) netif_wake_queue(a)
+#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12) )
+#define netif_tx_start_all_queues(a) netif_start_queue(a)
+#else
+#define netif_tx_start_all_queues(a) do {} while (0)
+#endif
+#define netif_stop_subqueue(_ndev,_qi) netif_stop_queue((_ndev))
+#define netif_start_subqueue(_ndev,_qi) netif_start_queue((_ndev))
+#endif /* HAVE_TX_MQ */
+#ifndef NETIF_F_MULTI_QUEUE
+#define NETIF_F_MULTI_QUEUE 0
+#define netif_is_multiqueue(a) 0
+#define netif_wake_subqueue(a, b)
+#endif /* NETIF_F_MULTI_QUEUE */
+
+#ifndef __WARN_printf
+extern void __kc_warn_slowpath(const char *file, const int line,
+ const char *fmt, ...)
+ __attribute__ ((format(printf, 3, 4)));
+#define __WARN_printf(arg...) __kc_warn_slowpath(__FILE__, __LINE__, arg)
+#endif /* __WARN_printf */
+
+#ifndef WARN
+#define WARN(condition, format...) ({ \
+ int __ret_warn_on = !!(condition); \
+ if (unlikely(__ret_warn_on)) \
+ __WARN_printf(format); \
+ unlikely(__ret_warn_on); \
+})
+#endif /* WARN */
+#else /* < 2.6.27 */
+#define HAVE_TX_MQ
+#define HAVE_NETDEV_SELECT_QUEUE
+#endif /* < 2.6.27 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) )
+#define pci_ioremap_bar(pdev, bar) ioremap(pci_resource_start(pdev, bar), \
+ pci_resource_len(pdev, bar))
+#define pci_wake_from_d3 _kc_pci_wake_from_d3
+#define pci_prepare_to_sleep _kc_pci_prepare_to_sleep
+extern int _kc_pci_wake_from_d3(struct pci_dev *dev, bool enable);
+extern int _kc_pci_prepare_to_sleep(struct pci_dev *dev);
+#define netdev_alloc_page(a) alloc_page(GFP_ATOMIC)
+#ifndef __skb_queue_head_init
+static inline void __kc_skb_queue_head_init(struct sk_buff_head *list)
+{
+ list->prev = list->next = (struct sk_buff *)list;
+ list->qlen = 0;
+}
+
+#define __skb_queue_head_init(_q) __kc_skb_queue_head_init(_q)
+#endif
+#ifndef skb_add_rx_frag
+#define skb_add_rx_frag _kc_skb_add_rx_frag
+extern void _kc_skb_add_rx_frag(struct sk_buff *, int, struct page *, int, int);
+#endif
+#endif /* < 2.6.28 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,29) )
+#ifndef swap
+#define swap(a, b) \
+ do { typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; } while (0)
+#endif
+#define pci_request_selected_regions_exclusive(pdev, bars, name) \
+ pci_request_selected_regions(pdev, bars, name)
+#ifndef CONFIG_NR_CPUS
+#define CONFIG_NR_CPUS 1
+#endif /* CONFIG_NR_CPUS */
+#ifndef pcie_aspm_enabled
+#define pcie_aspm_enabled() (1)
+#endif /* pcie_aspm_enabled */
+#else /* < 2.6.29 */
+#ifndef HAVE_NET_DEVICE_OPS
+#define HAVE_NET_DEVICE_OPS
+#endif
+#ifdef CONFIG_DCB
+#define HAVE_PFC_MODE_ENABLE
+#endif /* CONFIG_DCB */
+#endif /* < 2.6.29 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) )
+#define skb_rx_queue_recorded(a) false
+#define skb_get_rx_queue(a) 0
+#define skb_record_rx_queue(a, b) do {} while (0)
+#define skb_tx_hash(n, s) ___kc_skb_tx_hash((n), (s), (n)->real_num_tx_queues)
+#ifdef IXGBE_FCOE
+#undef CONFIG_FCOE
+#undef CONFIG_FCOE_MODULE
+#endif /* IXGBE_FCOE */
+#ifndef CONFIG_PCI_IOV
+#undef pci_enable_sriov
+#define pci_enable_sriov(a, b) -ENOTSUPP
+#undef pci_disable_sriov
+#define pci_disable_sriov(a) do {} while (0)
+#endif /* CONFIG_PCI_IOV */
+#ifndef pr_cont
+#define pr_cont(fmt, ...) \
+ printk(KERN_CONT fmt, ##__VA_ARGS__)
+#endif /* pr_cont */
+#else
+#define HAVE_ASPM_QUIRKS
+#endif /* < 2.6.30 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31) )
+#define ETH_P_1588 0x88F7
+#define ETH_P_FIP 0x8914
+#ifndef netdev_uc_count
+#define netdev_uc_count(dev) ((dev)->uc_count)
+#endif
+#ifndef netdev_for_each_uc_addr
+#define netdev_for_each_uc_addr(uclist, dev) \
+ for (uclist = dev->uc_list; uclist; uclist = uclist->next)
+#endif
+#else
+#ifndef HAVE_NETDEV_STORAGE_ADDRESS
+#define HAVE_NETDEV_STORAGE_ADDRESS
+#endif
+#ifndef HAVE_NETDEV_HW_ADDR
+#define HAVE_NETDEV_HW_ADDR
+#endif
+#ifndef HAVE_TRANS_START_IN_QUEUE
+#define HAVE_TRANS_START_IN_QUEUE
+#endif
+#endif /* < 2.6.31 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,32) )
+#undef netdev_tx_t
+#define netdev_tx_t int
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+#ifndef NETIF_F_FCOE_MTU
+#define NETIF_F_FCOE_MTU (1 << 26)
+#endif
+#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */
+
+#ifndef pm_runtime_get_sync
+#define pm_runtime_get_sync(dev) do {} while (0)
+#endif
+#ifndef pm_runtime_put
+#define pm_runtime_put(dev) do {} while (0)
+#endif
+#ifndef pm_runtime_put_sync
+#define pm_runtime_put_sync(dev) do {} while (0)
+#endif
+#ifndef pm_runtime_resume
+#define pm_runtime_resume(dev) do {} while (0)
+#endif
+#ifndef pm_schedule_suspend
+#define pm_schedule_suspend(dev, t) do {} while (0)
+#endif
+#ifndef pm_runtime_set_suspended
+#define pm_runtime_set_suspended(dev) do {} while (0)
+#endif
+#ifndef pm_runtime_disable
+#define pm_runtime_disable(dev) do {} while (0)
+#endif
+#ifndef pm_runtime_put_noidle
+#define pm_runtime_put_noidle(dev) do {} while (0)
+#endif
+#ifndef pm_runtime_set_active
+#define pm_runtime_set_active(dev) do {} while (0)
+#endif
+#ifndef pm_runtime_enable
+#define pm_runtime_enable(dev) do {} while (0)
+#endif
+#ifndef pm_runtime_get_noresume
+#define pm_runtime_get_noresume(dev) do {} while (0)
+#endif
+#else /* < 2.6.32 */
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+#ifndef HAVE_NETDEV_OPS_FCOE_ENABLE
+#define HAVE_NETDEV_OPS_FCOE_ENABLE
+#endif
+#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */
+#ifdef CONFIG_DCB
+#ifndef HAVE_DCBNL_OPS_GETAPP
+#define HAVE_DCBNL_OPS_GETAPP
+#endif
+#endif /* CONFIG_DCB */
+#include <linux/pm_runtime.h>
+/* IOV bad DMA target work arounds require at least this kernel rev support */
+#define HAVE_PCIE_TYPE
+#endif /* < 2.6.32 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,33) )
+#ifndef pci_pcie_cap
+#define pci_pcie_cap(pdev) pci_find_capability(pdev, PCI_CAP_ID_EXP)
+#endif
+#ifndef IPV4_FLOW
+#define IPV4_FLOW 0x10
+#endif /* IPV4_FLOW */
+#ifndef IPV6_FLOW
+#define IPV6_FLOW 0x11
+#endif /* IPV6_FLOW */
+/* Features back-ported to RHEL6 or SLES11 SP1 after 2.6.32 */
+#if ( (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,0)) || \
+ (SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,1,0)) )
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+#ifndef HAVE_NETDEV_OPS_FCOE_GETWWN
+#define HAVE_NETDEV_OPS_FCOE_GETWWN
+#endif
+#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */
+#endif /* RHEL6 or SLES11 SP1 */
+#ifndef __percpu
+#define __percpu
+#endif /* __percpu */
+#else /* < 2.6.33 */
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+#ifndef HAVE_NETDEV_OPS_FCOE_GETWWN
+#define HAVE_NETDEV_OPS_FCOE_GETWWN
+#endif
+#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */
+#define HAVE_ETHTOOL_SFP_DISPLAY_PORT
+#endif /* < 2.6.33 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34) )
+#ifndef ETH_FLAG_NTUPLE
+#define ETH_FLAG_NTUPLE NETIF_F_NTUPLE
+#endif
+
+#ifndef netdev_mc_count
+#define netdev_mc_count(dev) ((dev)->mc_count)
+#endif
+#ifndef netdev_mc_empty
+#define netdev_mc_empty(dev) (netdev_mc_count(dev) == 0)
+#endif
+#ifndef netdev_for_each_mc_addr
+#define netdev_for_each_mc_addr(mclist, dev) \
+ for (mclist = dev->mc_list; mclist; mclist = mclist->next)
+#endif
+#ifndef netdev_uc_count
+#define netdev_uc_count(dev) ((dev)->uc.count)
+#endif
+#ifndef netdev_uc_empty
+#define netdev_uc_empty(dev) (netdev_uc_count(dev) == 0)
+#endif
+#ifndef netdev_for_each_uc_addr
+#define netdev_for_each_uc_addr(ha, dev) \
+ list_for_each_entry(ha, &dev->uc.list, list)
+#endif
+#ifndef dma_set_coherent_mask
+#define dma_set_coherent_mask(dev,mask) \
+ pci_set_consistent_dma_mask(to_pci_dev(dev),(mask))
+#endif
+#ifndef pci_dev_run_wake
+#define pci_dev_run_wake(pdev) (0)
+#endif
+
+/* netdev logging taken from include/linux/netdevice.h */
+#ifndef netdev_name
+static inline const char *_kc_netdev_name(const struct net_device *dev)
+{
+ if (dev->reg_state != NETREG_REGISTERED)
+ return "(unregistered net_device)";
+ return dev->name;
+}
+
+#define netdev_name(netdev) _kc_netdev_name(netdev)
+#endif /* netdev_name */
+
+#undef netdev_printk
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) )
+#define netdev_printk(level, netdev, format, args...) \
+do { \
+ struct adapter_struct *kc_adapter = netdev_priv(netdev);\
+ struct pci_dev *pdev = kc_adapter->pdev; \
+ printk("%s %s: " format, level, pci_name(pdev), \
+ ##args); \
+} while(0)
+#elif ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21) )
+#define netdev_printk(level, netdev, format, args...) \
+do { \
+ struct adapter_struct *kc_adapter = netdev_priv(netdev);\
+ struct pci_dev *pdev = kc_adapter->pdev; \
+ struct device *dev = pci_dev_to_dev(pdev); \
+ dev_printk(level, dev, "%s: " format, \
+ netdev_name(netdev), ##args); \
+} while(0)
+#else /* 2.6.21 => 2.6.34 */
+#define netdev_printk(level, netdev, format, args...) \
+ dev_printk(level, (netdev)->dev.parent, \
+ "%s: " format, \
+ netdev_name(netdev), ##args)
+#endif /* <2.6.0 <2.6.21 <2.6.34 */
+#undef netdev_emerg
+#define netdev_emerg(dev, format, args...) \
+ netdev_printk(KERN_EMERG, dev, format, ##args)
+#undef netdev_alert
+#define netdev_alert(dev, format, args...) \
+ netdev_printk(KERN_ALERT, dev, format, ##args)
+#undef netdev_crit
+#define netdev_crit(dev, format, args...) \
+ netdev_printk(KERN_CRIT, dev, format, ##args)
+#undef netdev_err
+#define netdev_err(dev, format, args...) \
+ netdev_printk(KERN_ERR, dev, format, ##args)
+#undef netdev_warn
+#define netdev_warn(dev, format, args...) \
+ netdev_printk(KERN_WARNING, dev, format, ##args)
+#undef netdev_notice
+#define netdev_notice(dev, format, args...) \
+ netdev_printk(KERN_NOTICE, dev, format, ##args)
+#undef netdev_info
+#define netdev_info(dev, format, args...) \
+ netdev_printk(KERN_INFO, dev, format, ##args)
+#undef netdev_dbg
+#if defined(DEBUG)
+#define netdev_dbg(__dev, format, args...) \
+ netdev_printk(KERN_DEBUG, __dev, format, ##args)
+#elif defined(CONFIG_DYNAMIC_DEBUG)
+#define netdev_dbg(__dev, format, args...) \
+do { \
+ dynamic_dev_dbg((__dev)->dev.parent, "%s: " format, \
+ netdev_name(__dev), ##args); \
+} while (0)
+#else /* DEBUG */
+#define netdev_dbg(__dev, format, args...) \
+({ \
+ if (0) \
+ netdev_printk(KERN_DEBUG, __dev, format, ##args); \
+ 0; \
+})
+#endif /* DEBUG */
+
+#undef netif_printk
+#define netif_printk(priv, type, level, dev, fmt, args...) \
+do { \
+ if (netif_msg_##type(priv)) \
+ netdev_printk(level, (dev), fmt, ##args); \
+} while (0)
+
+#undef netif_emerg
+#define netif_emerg(priv, type, dev, fmt, args...) \
+ netif_level(emerg, priv, type, dev, fmt, ##args)
+#undef netif_alert
+#define netif_alert(priv, type, dev, fmt, args...) \
+ netif_level(alert, priv, type, dev, fmt, ##args)
+#undef netif_crit
+#define netif_crit(priv, type, dev, fmt, args...) \
+ netif_level(crit, priv, type, dev, fmt, ##args)
+#undef netif_err
+#define netif_err(priv, type, dev, fmt, args...) \
+ netif_level(err, priv, type, dev, fmt, ##args)
+#undef netif_warn
+#define netif_warn(priv, type, dev, fmt, args...) \
+ netif_level(warn, priv, type, dev, fmt, ##args)
+#undef netif_notice
+#define netif_notice(priv, type, dev, fmt, args...) \
+ netif_level(notice, priv, type, dev, fmt, ##args)
+#undef netif_info
+#define netif_info(priv, type, dev, fmt, args...) \
+ netif_level(info, priv, type, dev, fmt, ##args)
+
+#ifdef SET_SYSTEM_SLEEP_PM_OPS
+#define HAVE_SYSTEM_SLEEP_PM_OPS
+#endif
+
+#ifndef for_each_set_bit
+#define for_each_set_bit(bit, addr, size) \
+ for ((bit) = find_first_bit((addr), (size)); \
+ (bit) < (size); \
+ (bit) = find_next_bit((addr), (size), (bit) + 1))
+#endif /* for_each_set_bit */
+
+#ifndef DEFINE_DMA_UNMAP_ADDR
+#define DEFINE_DMA_UNMAP_ADDR DECLARE_PCI_UNMAP_ADDR
+#define DEFINE_DMA_UNMAP_LEN DECLARE_PCI_UNMAP_LEN
+#define dma_unmap_addr pci_unmap_addr
+#define dma_unmap_addr_set pci_unmap_addr_set
+#define dma_unmap_len pci_unmap_len
+#define dma_unmap_len_set pci_unmap_len_set
+#endif /* DEFINE_DMA_UNMAP_ADDR */
+#else /* < 2.6.34 */
+#define HAVE_SYSTEM_SLEEP_PM_OPS
+#ifndef HAVE_SET_RX_MODE
+#define HAVE_SET_RX_MODE
+#endif
+
+#endif /* < 2.6.34 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) )
+#ifndef numa_node_id
+#define numa_node_id() 0
+#endif
+#ifdef HAVE_TX_MQ
+#include <net/sch_generic.h>
+#ifndef CONFIG_NETDEVICES_MULTIQUEUE
+void _kc_netif_set_real_num_tx_queues(struct net_device *, unsigned int);
+#define netif_set_real_num_tx_queues _kc_netif_set_real_num_tx_queues
+#else /* CONFIG_NETDEVICES_MULTI_QUEUE */
+#define netif_set_real_num_tx_queues(_netdev, _count) \
+ do { \
+ (_netdev)->egress_subqueue_count = _count; \
+ } while (0)
+#endif /* CONFIG_NETDEVICES_MULTI_QUEUE */
+#else
+#define netif_set_real_num_tx_queues(_netdev, _count) do {} while(0)
+#endif /* HAVE_TX_MQ */
+#ifndef ETH_FLAG_RXHASH
+#define ETH_FLAG_RXHASH (1<<28)
+#endif /* ETH_FLAG_RXHASH */
+#else /* < 2.6.35 */
+#define HAVE_PM_QOS_REQUEST_LIST
+#define HAVE_IRQ_AFFINITY_HINT
+#endif /* < 2.6.35 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36) )
+extern int _kc_ethtool_op_set_flags(struct net_device *, u32, u32);
+#define ethtool_op_set_flags _kc_ethtool_op_set_flags
+extern u32 _kc_ethtool_op_get_flags(struct net_device *);
+#define ethtool_op_get_flags _kc_ethtool_op_get_flags
+
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+#ifdef NET_IP_ALIGN
+#undef NET_IP_ALIGN
+#endif
+#define NET_IP_ALIGN 0
+#endif /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
+
+#ifdef NET_SKB_PAD
+#undef NET_SKB_PAD
+#endif
+
+#if (L1_CACHE_BYTES > 32)
+#define NET_SKB_PAD L1_CACHE_BYTES
+#else
+#define NET_SKB_PAD 32
+#endif
+
+static inline struct sk_buff *_kc_netdev_alloc_skb_ip_align(struct net_device
+ *dev,
+ unsigned int length)
+{
+ struct sk_buff *skb;
+
+ skb = alloc_skb(length + NET_SKB_PAD + NET_IP_ALIGN, GFP_ATOMIC);
+ if (skb) {
+#if (NET_IP_ALIGN + NET_SKB_PAD)
+ skb_reserve(skb, NET_IP_ALIGN + NET_SKB_PAD);
+#endif
+ skb->dev = dev;
+ }
+ return skb;
+}
+
+#ifdef netdev_alloc_skb_ip_align
+#undef netdev_alloc_skb_ip_align
+#endif
+#define netdev_alloc_skb_ip_align(n, l) _kc_netdev_alloc_skb_ip_align(n, l)
+
+#undef netif_level
+#define netif_level(level, priv, type, dev, fmt, args...) \
+do { \
+ if (netif_msg_##type(priv)) \
+ netdev_##level(dev, fmt, ##args); \
+} while (0)
+
+#undef usleep_range
+#define usleep_range(min, max) msleep(DIV_ROUND_UP(min, 1000))
+
+#else /* < 2.6.36 */
+#define HAVE_PM_QOS_REQUEST_ACTIVE
+#define HAVE_8021P_SUPPORT
+#define HAVE_NDO_GET_STATS64
+#endif /* < 2.6.36 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37) )
+#ifndef ETHTOOL_RXNTUPLE_ACTION_CLEAR
+#define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2)
+#endif
+#ifndef VLAN_N_VID
+#define VLAN_N_VID VLAN_GROUP_ARRAY_LEN
+#endif /* VLAN_N_VID */
+#ifndef ETH_FLAG_TXVLAN
+#define ETH_FLAG_TXVLAN (1 << 7)
+#endif /* ETH_FLAG_TXVLAN */
+#ifndef ETH_FLAG_RXVLAN
+#define ETH_FLAG_RXVLAN (1 << 8)
+#endif /* ETH_FLAG_RXVLAN */
+
+static inline void _kc_skb_checksum_none_assert(struct sk_buff *skb)
+{
+ WARN_ON(skb->ip_summed != CHECKSUM_NONE);
+}
+
+#define skb_checksum_none_assert(skb) _kc_skb_checksum_none_assert(skb)
+
+static inline void *_kc_vzalloc_node(unsigned long size, int node)
+{
+ void *addr = vmalloc_node(size, node);
+ if (addr)
+ memset(addr, 0, size);
+ return addr;
+}
+
+#define vzalloc_node(_size, _node) _kc_vzalloc_node(_size, _node)
+
+static inline void *_kc_vzalloc(unsigned long size)
+{
+ void *addr = vmalloc(size);
+ if (addr)
+ memset(addr, 0, size);
+ return addr;
+}
+
+#define vzalloc(_size) _kc_vzalloc(_size)
+
+#ifndef vlan_get_protocol
+static inline __be16 __kc_vlan_get_protocol(const struct sk_buff *skb)
+{
+ if (vlan_tx_tag_present(skb) ||
+ skb->protocol != cpu_to_be16(ETH_P_8021Q))
+ return skb->protocol;
+
+ if (skb_headlen(skb) < sizeof(struct vlan_ethhdr))
+ return 0;
+
+ return ((struct vlan_ethhdr *)skb->data)->h_vlan_encapsulated_proto;
+}
+
+#define vlan_get_protocol(_skb) __kc_vlan_get_protocol(_skb)
+#endif
+#ifdef HAVE_HW_TIME_STAMP
+#define SKBTX_HW_TSTAMP (1 << 0)
+#define SKBTX_IN_PROGRESS (1 << 2)
+#define SKB_SHARED_TX_IS_UNION
+#endif
+#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,4,18) )
+#ifndef HAVE_VLAN_RX_REGISTER
+#define HAVE_VLAN_RX_REGISTER
+#endif
+#endif /* > 2.4.18 */
+#endif /* < 2.6.37 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) )
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) )
+#define skb_checksum_start_offset(skb) skb_transport_offset(skb)
+#else /* 2.6.22 -> 2.6.37 */
+static inline int _kc_skb_checksum_start_offset(const struct sk_buff *skb)
+{
+ return skb->csum_start - skb_headroom(skb);
+}
+
+#define skb_checksum_start_offset(skb) _kc_skb_checksum_start_offset(skb)
+#endif /* 2.6.22 -> 2.6.37 */
+#ifdef CONFIG_DCB
+#ifndef IEEE_8021QAZ_MAX_TCS
+#define IEEE_8021QAZ_MAX_TCS 8
+#endif
+#ifndef DCB_CAP_DCBX_HOST
+#define DCB_CAP_DCBX_HOST 0x01
+#endif
+#ifndef DCB_CAP_DCBX_LLD_MANAGED
+#define DCB_CAP_DCBX_LLD_MANAGED 0x02
+#endif
+#ifndef DCB_CAP_DCBX_VER_CEE
+#define DCB_CAP_DCBX_VER_CEE 0x04
+#endif
+#ifndef DCB_CAP_DCBX_VER_IEEE
+#define DCB_CAP_DCBX_VER_IEEE 0x08
+#endif
+#ifndef DCB_CAP_DCBX_STATIC
+#define DCB_CAP_DCBX_STATIC 0x10
+#endif
+#endif /* CONFIG_DCB */
+extern u16 ___kc_skb_tx_hash(struct net_device *, const struct sk_buff *, u16);
+#define __skb_tx_hash(n, s, q) ___kc_skb_tx_hash((n), (s), (q))
+#else /* < 2.6.38 */
+#endif /* < 2.6.38 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,39) )
+#ifndef skb_queue_reverse_walk_safe
+#define skb_queue_reverse_walk_safe(queue, skb, tmp) \
+ for (skb = (queue)->prev, tmp = skb->prev; \
+ skb != (struct sk_buff *)(queue); \
+ skb = tmp, tmp = skb->prev)
+#endif
+#else /* < 2.6.39 */
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+#ifndef HAVE_NETDEV_OPS_FCOE_DDP_TARGET
+#define HAVE_NETDEV_OPS_FCOE_DDP_TARGET
+#endif
+#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */
+#ifndef HAVE_MQPRIO
+#define HAVE_MQPRIO
+#endif
+#ifndef HAVE_SETUP_TC
+#define HAVE_SETUP_TC
+#endif
+#ifdef CONFIG_DCB
+#ifndef HAVE_DCBNL_IEEE
+#define HAVE_DCBNL_IEEE
+#endif
+#endif /* CONFIG_DCB */
+#ifndef HAVE_NDO_SET_FEATURES
+#define HAVE_NDO_SET_FEATURES
+#endif
+#endif /* < 2.6.39 */
+
+/*****************************************************************************/
+/* use < 2.6.40 because of a Fedora 15 kernel update where they
+ * updated the kernel version to 2.6.40.x and they back-ported 3.0 features
+ * like set_phys_id for ethtool.
+ */
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,40) )
+#ifdef ETHTOOL_GRXRINGS
+#ifndef FLOW_EXT
+#define FLOW_EXT 0x80000000
+union _kc_ethtool_flow_union {
+ struct ethtool_tcpip4_spec tcp_ip4_spec;
+ struct ethtool_usrip4_spec usr_ip4_spec;
+ __u8 hdata[60];
+};
+struct _kc_ethtool_flow_ext {
+ __be16 vlan_etype;
+ __be16 vlan_tci;
+ __be32 data[2];
+};
+struct _kc_ethtool_rx_flow_spec {
+ __u32 flow_type;
+ union _kc_ethtool_flow_union h_u;
+ struct _kc_ethtool_flow_ext h_ext;
+ union _kc_ethtool_flow_union m_u;
+ struct _kc_ethtool_flow_ext m_ext;
+ __u64 ring_cookie;
+ __u32 location;
+};
+#define ethtool_rx_flow_spec _kc_ethtool_rx_flow_spec
+#endif /* FLOW_EXT */
+#endif
+
+#define pci_disable_link_state_locked pci_disable_link_state
+
+#ifndef PCI_LTR_VALUE_MASK
+#define PCI_LTR_VALUE_MASK 0x000003ff
+#endif
+#ifndef PCI_LTR_SCALE_MASK
+#define PCI_LTR_SCALE_MASK 0x00001c00
+#endif
+#ifndef PCI_LTR_SCALE_SHIFT
+#define PCI_LTR_SCALE_SHIFT 10
+#endif
+
+#else /* < 2.6.40 */
+#define HAVE_ETHTOOL_SET_PHYS_ID
+#endif /* < 2.6.40 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,1,0) )
+#ifndef __netdev_alloc_skb_ip_align
+#define __netdev_alloc_skb_ip_align(d,l,_g) netdev_alloc_skb_ip_align(d,l)
+#endif /* __netdev_alloc_skb_ip_align */
+#define dcb_ieee_setapp(dev, app) dcb_setapp(dev, app)
+#define dcb_ieee_delapp(dev, app) 0
+#define dcb_ieee_getapp_mask(dev, app) (1 << app->priority)
+#else /* < 3.1.0 */
+#ifndef HAVE_DCBNL_IEEE_DELAPP
+#define HAVE_DCBNL_IEEE_DELAPP
+#endif
+#endif /* < 3.1.0 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0) )
+#ifdef ETHTOOL_GRXRINGS
+#define HAVE_ETHTOOL_GET_RXNFC_VOID_RULE_LOCS
+#endif /* ETHTOOL_GRXRINGS */
+
+#ifndef skb_frag_size
+#define skb_frag_size(frag) _kc_skb_frag_size(frag)
+static inline unsigned int _kc_skb_frag_size(const skb_frag_t * frag)
+{
+ return frag->size;
+}
+#endif /* skb_frag_size */
+
+#ifndef skb_frag_size_sub
+#define skb_frag_size_sub(frag, delta) _kc_skb_frag_size_sub(frag, delta)
+static inline void _kc_skb_frag_size_sub(skb_frag_t * frag, int delta)
+{
+ frag->size -= delta;
+}
+#endif /* skb_frag_size_sub */
+
+#ifndef skb_frag_page
+#define skb_frag_page(frag) _kc_skb_frag_page(frag)
+static inline struct page *_kc_skb_frag_page(const skb_frag_t * frag)
+{
+ return frag->page;
+}
+#endif /* skb_frag_page */
+
+#ifndef skb_frag_address
+#define skb_frag_address(frag) _kc_skb_frag_address(frag)
+static inline void *_kc_skb_frag_address(const skb_frag_t * frag)
+{
+ return page_address(skb_frag_page(frag)) + frag->page_offset;
+}
+#endif /* skb_frag_address */
+
+#ifndef skb_frag_dma_map
+#define skb_frag_dma_map(dev,frag,offset,size,dir) \
+ _kc_skb_frag_dma_map(dev,frag,offset,size,dir)
+static inline dma_addr_t _kc_skb_frag_dma_map(struct device *dev,
+ const skb_frag_t * frag,
+ size_t offset, size_t size,
+ enum dma_data_direction dir)
+{
+ return dma_map_page(dev, skb_frag_page(frag),
+ frag->page_offset + offset, size, dir);
+}
+#endif /* skb_frag_dma_map */
+
+#ifndef __skb_frag_unref
+#define __skb_frag_unref(frag) __kc_skb_frag_unref(frag)
+static inline void __kc_skb_frag_unref(skb_frag_t * frag)
+{
+ put_page(skb_frag_page(frag));
+}
+#endif /* __skb_frag_unref */
+#else /* < 3.2.0 */
+#ifndef HAVE_PCI_DEV_FLAGS_ASSIGNED
+#define HAVE_PCI_DEV_FLAGS_ASSIGNED
+#define HAVE_VF_SPOOFCHK_CONFIGURE
+#endif
+#endif /* < 3.2.0 */
+
+#if (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE == RHEL_RELEASE_VERSION(6,2))
+#undef ixgbe_get_netdev_tc_txq
+#define ixgbe_get_netdev_tc_txq(dev, tc) (&netdev_extended(dev)->qos_data.tc_to_txq[tc])
+#endif
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0) )
+//typedef u32 netdev_features_t;
+#else /* ! < 3.3.0 */
+#define HAVE_INT_NDO_VLAN_RX_ADD_VID
+#ifdef ETHTOOL_SRXNTUPLE
+#undef ETHTOOL_SRXNTUPLE
+#endif
+#endif /* < 3.3.0 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0) )
+#ifndef NETIF_F_RXFCS
+#define NETIF_F_RXFCS 0
+#endif /* NETIF_F_RXFCS */
+#ifndef NETIF_F_RXALL
+#define NETIF_F_RXALL 0
+#endif /* NETIF_F_RXALL */
+
+#define NUMTCS_RETURNS_U8
+
+#include <linux/highmem.h>
+static inline void *_kc_kmap_atomic(struct page *page)
+{
+ return kmap_atomic(page, KM_SKB_DATA_SOFTIRQ);
+}
+
+#undef kmap_atomic
+#define kmap_atomic(page) _kc_kmap_atomic((page))
+
+static inline void _kc_kunmap_atomic(void *addr)
+{
+ kunmap_atomic(addr, KM_SKB_DATA_SOFTIRQ);
+}
+
+#undef kunmap_atomic
+#define kunmap_atomic(addr) _kc_kunmap_atomic((addr))
+
+#endif /* < 3.4.0 */
+
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,5,0) )
+#else
+#define HAVE_FDB_OPS
+#endif /* < 3.5.0 */
+#endif /* _KCOMPAT_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2012 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/*
+ * net/core/ethtool.c - Ethtool ioctl handler
+ * Copyright (c) 2003 Matthew Wilcox <matthew@wil.cx>
+ *
+ * This file is where we call all the ethtool_ops commands to get
+ * the information ethtool needs. We fall back to calling do_ioctl()
+ * for drivers which haven't been converted to ethtool_ops yet.
+ *
+ * It's GPL, stupid.
+ *
+ * Modification by sfeldma@pobox.com to work as backward compat
+ * solution for pre-ethtool_ops kernels.
+ * - copied struct ethtool_ops from ethtool.h
+ * - defined SET_ETHTOOL_OPS
+ * - put in some #ifndef NETIF_F_xxx wrappers
+ * - changes refs to dev->ethtool_ops to ethtool_ops
+ * - changed dev_ethtool to ethtool_ioctl
+ * - remove EXPORT_SYMBOL()s
+ * - added _kc_ prefix in built-in ethtool_op_xxx ops.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/netdevice.h>
+#include <asm/uaccess.h>
+
+#include "kcompat.h"
+
+#undef SUPPORTED_10000baseT_Full
+#define SUPPORTED_10000baseT_Full (1 << 12)
+#undef ADVERTISED_10000baseT_Full
+#define ADVERTISED_10000baseT_Full (1 << 12)
+#undef SPEED_10000
+#define SPEED_10000 10000
+
+#undef ethtool_ops
+#define ethtool_ops _kc_ethtool_ops
+
+struct _kc_ethtool_ops {
+ int (*get_settings) (struct net_device *, struct ethtool_cmd *);
+ int (*set_settings) (struct net_device *, struct ethtool_cmd *);
+ void (*get_drvinfo) (struct net_device *, struct ethtool_drvinfo *);
+ int (*get_regs_len) (struct net_device *);
+ void (*get_regs) (struct net_device *, struct ethtool_regs *, void *);
+ void (*get_wol) (struct net_device *, struct ethtool_wolinfo *);
+ int (*set_wol) (struct net_device *, struct ethtool_wolinfo *);
+ u32 (*get_msglevel) (struct net_device *);
+ void (*set_msglevel) (struct net_device *, u32);
+ int (*nway_reset) (struct net_device *);
+ u32 (*get_link) (struct net_device *);
+ int (*get_eeprom_len) (struct net_device *);
+ int (*get_eeprom) (struct net_device *, struct ethtool_eeprom *, u8 *);
+ int (*set_eeprom) (struct net_device *, struct ethtool_eeprom *, u8 *);
+ int (*get_coalesce) (struct net_device *, struct ethtool_coalesce *);
+ int (*set_coalesce) (struct net_device *, struct ethtool_coalesce *);
+ void (*get_ringparam) (struct net_device *, struct ethtool_ringparam *);
+ int (*set_ringparam) (struct net_device *, struct ethtool_ringparam *);
+ void (*get_pauseparam) (struct net_device *,
+ struct ethtool_pauseparam *);
+ int (*set_pauseparam) (struct net_device *,
+ struct ethtool_pauseparam *);
+ u32 (*get_rx_csum) (struct net_device *);
+ int (*set_rx_csum) (struct net_device *, u32);
+ u32 (*get_tx_csum) (struct net_device *);
+ int (*set_tx_csum) (struct net_device *, u32);
+ u32 (*get_sg) (struct net_device *);
+ int (*set_sg) (struct net_device *, u32);
+ u32 (*get_tso) (struct net_device *);
+ int (*set_tso) (struct net_device *, u32);
+ int (*self_test_count) (struct net_device *);
+ void (*self_test) (struct net_device *, struct ethtool_test *, u64 *);
+ void (*get_strings) (struct net_device *, u32 stringset, u8 *);
+ int (*phys_id) (struct net_device *, u32);
+ int (*get_stats_count) (struct net_device *);
+ void (*get_ethtool_stats) (struct net_device *, struct ethtool_stats *,
+ u64 *);
+} *ethtool_ops = NULL;
+
+#undef SET_ETHTOOL_OPS
+#define SET_ETHTOOL_OPS(netdev, ops) (ethtool_ops = (ops))
+
+/*
+ * Some useful ethtool_ops methods that are device independent. If we find that
+ * all drivers want to do the same thing here, we can turn these into dev_()
+ * function calls.
+ */
+
+#undef ethtool_op_get_link
+#define ethtool_op_get_link _kc_ethtool_op_get_link
+u32 _kc_ethtool_op_get_link(struct net_device *dev)
+{
+ return netif_carrier_ok(dev) ? 1 : 0;
+}
+
+#undef ethtool_op_get_tx_csum
+#define ethtool_op_get_tx_csum _kc_ethtool_op_get_tx_csum
+u32 _kc_ethtool_op_get_tx_csum(struct net_device *dev)
+{
+#ifdef NETIF_F_IP_CSUM
+ return (dev->features & NETIF_F_IP_CSUM) != 0;
+#else
+ return 0;
+#endif
+}
+
+#undef ethtool_op_set_tx_csum
+#define ethtool_op_set_tx_csum _kc_ethtool_op_set_tx_csum
+int _kc_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
+{
+#ifdef NETIF_F_IP_CSUM
+ if (data)
+#ifdef NETIF_F_IPV6_CSUM
+ dev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
+ else
+ dev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
+#else
+ dev->features |= NETIF_F_IP_CSUM;
+ else
+ dev->features &= ~NETIF_F_IP_CSUM;
+#endif
+#endif
+
+ return 0;
+}
+
+#undef ethtool_op_get_sg
+#define ethtool_op_get_sg _kc_ethtool_op_get_sg
+u32 _kc_ethtool_op_get_sg(struct net_device *dev)
+{
+#ifdef NETIF_F_SG
+ return (dev->features & NETIF_F_SG) != 0;
+#else
+ return 0;
+#endif
+}
+
+#undef ethtool_op_set_sg
+#define ethtool_op_set_sg _kc_ethtool_op_set_sg
+int _kc_ethtool_op_set_sg(struct net_device *dev, u32 data)
+{
+#ifdef NETIF_F_SG
+ if (data)
+ dev->features |= NETIF_F_SG;
+ else
+ dev->features &= ~NETIF_F_SG;
+#endif
+
+ return 0;
+}
+
+#undef ethtool_op_get_tso
+#define ethtool_op_get_tso _kc_ethtool_op_get_tso
+u32 _kc_ethtool_op_get_tso(struct net_device *dev)
+{
+#ifdef NETIF_F_TSO
+ return (dev->features & NETIF_F_TSO) != 0;
+#else
+ return 0;
+#endif
+}
+
+#undef ethtool_op_set_tso
+#define ethtool_op_set_tso _kc_ethtool_op_set_tso
+int _kc_ethtool_op_set_tso(struct net_device *dev, u32 data)
+{
+#ifdef NETIF_F_TSO
+ if (data)
+ dev->features |= NETIF_F_TSO;
+ else
+ dev->features &= ~NETIF_F_TSO;
+#endif
+
+ return 0;
+}
+
+/* Handlers for each ethtool command */
+
+static int ethtool_get_settings(struct net_device *dev, void *useraddr)
+{
+ struct ethtool_cmd cmd = { ETHTOOL_GSET };
+ int err;
+
+ if (!ethtool_ops->get_settings)
+ return -EOPNOTSUPP;
+
+ err = ethtool_ops->get_settings(dev, &cmd);
+ if (err < 0)
+ return err;
+
+ if (copy_to_user(useraddr, &cmd, sizeof(cmd)))
+ return -EFAULT;
+ return 0;
+}
+
+static int ethtool_set_settings(struct net_device *dev, void *useraddr)
+{
+ struct ethtool_cmd cmd;
+
+ if (!ethtool_ops->set_settings)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&cmd, useraddr, sizeof(cmd)))
+ return -EFAULT;
+
+ return ethtool_ops->set_settings(dev, &cmd);
+}
+
+static int ethtool_get_drvinfo(struct net_device *dev, void *useraddr)
+{
+ struct ethtool_drvinfo info;
+ struct ethtool_ops *ops = ethtool_ops;
+
+ if (!ops->get_drvinfo)
+ return -EOPNOTSUPP;
+
+ memset(&info, 0, sizeof(info));
+ info.cmd = ETHTOOL_GDRVINFO;
+ ops->get_drvinfo(dev, &info);
+
+ if (ops->self_test_count)
+ info.testinfo_len = ops->self_test_count(dev);
+ if (ops->get_stats_count)
+ info.n_stats = ops->get_stats_count(dev);
+ if (ops->get_regs_len)
+ info.regdump_len = ops->get_regs_len(dev);
+ if (ops->get_eeprom_len)
+ info.eedump_len = ops->get_eeprom_len(dev);
+
+ if (copy_to_user(useraddr, &info, sizeof(info)))
+ return -EFAULT;
+ return 0;
+}
+
+static int ethtool_get_regs(struct net_device *dev, char *useraddr)
+{
+ struct ethtool_regs regs;
+ struct ethtool_ops *ops = ethtool_ops;
+ void *regbuf;
+ int reglen, ret;
+
+ if (!ops->get_regs || !ops->get_regs_len)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(®s, useraddr, sizeof(regs)))
+ return -EFAULT;
+
+ reglen = ops->get_regs_len(dev);
+ if (regs.len > reglen)
+ regs.len = reglen;
+
+ regbuf = kmalloc(reglen, GFP_USER);
+ if (!regbuf)
+ return -ENOMEM;
+
+ ops->get_regs(dev, ®s, regbuf);
+
+ ret = -EFAULT;
+ if (copy_to_user(useraddr, ®s, sizeof(regs)))
+ goto out;
+ useraddr += offsetof(struct ethtool_regs, data);
+ if (copy_to_user(useraddr, regbuf, reglen))
+ goto out;
+ ret = 0;
+
+out:
+ kfree(regbuf);
+ return ret;
+}
+
+static int ethtool_get_wol(struct net_device *dev, char *useraddr)
+{
+ struct ethtool_wolinfo wol = { ETHTOOL_GWOL };
+
+ if (!ethtool_ops->get_wol)
+ return -EOPNOTSUPP;
+
+ ethtool_ops->get_wol(dev, &wol);
+
+ if (copy_to_user(useraddr, &wol, sizeof(wol)))
+ return -EFAULT;
+ return 0;
+}
+
+static int ethtool_set_wol(struct net_device *dev, char *useraddr)
+{
+ struct ethtool_wolinfo wol;
+
+ if (!ethtool_ops->set_wol)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&wol, useraddr, sizeof(wol)))
+ return -EFAULT;
+
+ return ethtool_ops->set_wol(dev, &wol);
+}
+
+static int ethtool_get_msglevel(struct net_device *dev, char *useraddr)
+{
+ struct ethtool_value edata = { ETHTOOL_GMSGLVL };
+
+ if (!ethtool_ops->get_msglevel)
+ return -EOPNOTSUPP;
+
+ edata.data = ethtool_ops->get_msglevel(dev);
+
+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
+ return -EFAULT;
+ return 0;
+}
+
+static int ethtool_set_msglevel(struct net_device *dev, char *useraddr)
+{
+ struct ethtool_value edata;
+
+ if (!ethtool_ops->set_msglevel)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&edata, useraddr, sizeof(edata)))
+ return -EFAULT;
+
+ ethtool_ops->set_msglevel(dev, edata.data);
+ return 0;
+}
+
+static int ethtool_nway_reset(struct net_device *dev)
+{
+ if (!ethtool_ops->nway_reset)
+ return -EOPNOTSUPP;
+
+ return ethtool_ops->nway_reset(dev);
+}
+
+static int ethtool_get_link(struct net_device *dev, void *useraddr)
+{
+ struct ethtool_value edata = { ETHTOOL_GLINK };
+
+ if (!ethtool_ops->get_link)
+ return -EOPNOTSUPP;
+
+ edata.data = ethtool_ops->get_link(dev);
+
+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
+ return -EFAULT;
+ return 0;
+}
+
+static int ethtool_get_eeprom(struct net_device *dev, void *useraddr)
+{
+ struct ethtool_eeprom eeprom;
+ struct ethtool_ops *ops = ethtool_ops;
+ u8 *data;
+ int ret;
+
+ if (!ops->get_eeprom || !ops->get_eeprom_len)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&eeprom, useraddr, sizeof(eeprom)))
+ return -EFAULT;
+
+ /* Check for wrap and zero */
+ if (eeprom.offset + eeprom.len <= eeprom.offset)
+ return -EINVAL;
+
+ /* Check for exceeding total eeprom len */
+ if (eeprom.offset + eeprom.len > ops->get_eeprom_len(dev))
+ return -EINVAL;
+
+ data = kmalloc(eeprom.len, GFP_USER);
+ if (!data)
+ return -ENOMEM;
+
+ ret = -EFAULT;
+ if (copy_from_user(data, useraddr + sizeof(eeprom), eeprom.len))
+ goto out;
+
+ ret = ops->get_eeprom(dev, &eeprom, data);
+ if (ret)
+ goto out;
+
+ ret = -EFAULT;
+ if (copy_to_user(useraddr, &eeprom, sizeof(eeprom)))
+ goto out;
+ if (copy_to_user(useraddr + sizeof(eeprom), data, eeprom.len))
+ goto out;
+ ret = 0;
+
+out:
+ kfree(data);
+ return ret;
+}
+
+static int ethtool_set_eeprom(struct net_device *dev, void *useraddr)
+{
+ struct ethtool_eeprom eeprom;
+ struct ethtool_ops *ops = ethtool_ops;
+ u8 *data;
+ int ret;
+
+ if (!ops->set_eeprom || !ops->get_eeprom_len)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&eeprom, useraddr, sizeof(eeprom)))
+ return -EFAULT;
+
+ /* Check for wrap and zero */
+ if (eeprom.offset + eeprom.len <= eeprom.offset)
+ return -EINVAL;
+
+ /* Check for exceeding total eeprom len */
+ if (eeprom.offset + eeprom.len > ops->get_eeprom_len(dev))
+ return -EINVAL;
+
+ data = kmalloc(eeprom.len, GFP_USER);
+ if (!data)
+ return -ENOMEM;
+
+ ret = -EFAULT;
+ if (copy_from_user(data, useraddr + sizeof(eeprom), eeprom.len))
+ goto out;
+
+ ret = ops->set_eeprom(dev, &eeprom, data);
+ if (ret)
+ goto out;
+
+ if (copy_to_user(useraddr + sizeof(eeprom), data, eeprom.len))
+ ret = -EFAULT;
+
+out:
+ kfree(data);
+ return ret;
+}
+
+static int ethtool_get_coalesce(struct net_device *dev, void *useraddr)
+{
+ struct ethtool_coalesce coalesce = { ETHTOOL_GCOALESCE };
+
+ if (!ethtool_ops->get_coalesce)
+ return -EOPNOTSUPP;
+
+ ethtool_ops->get_coalesce(dev, &coalesce);
+
+ if (copy_to_user(useraddr, &coalesce, sizeof(coalesce)))
+ return -EFAULT;
+ return 0;
+}
+
+static int ethtool_set_coalesce(struct net_device *dev, void *useraddr)
+{
+ struct ethtool_coalesce coalesce;
+
+ if (!ethtool_ops->get_coalesce)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&coalesce, useraddr, sizeof(coalesce)))
+ return -EFAULT;
+
+ return ethtool_ops->set_coalesce(dev, &coalesce);
+}
+
+static int ethtool_get_ringparam(struct net_device *dev, void *useraddr)
+{
+ struct ethtool_ringparam ringparam = { ETHTOOL_GRINGPARAM };
+
+ if (!ethtool_ops->get_ringparam)
+ return -EOPNOTSUPP;
+
+ ethtool_ops->get_ringparam(dev, &ringparam);
+
+ if (copy_to_user(useraddr, &ringparam, sizeof(ringparam)))
+ return -EFAULT;
+ return 0;
+}
+
+static int ethtool_set_ringparam(struct net_device *dev, void *useraddr)
+{
+ struct ethtool_ringparam ringparam;
+
+ if (!ethtool_ops->get_ringparam)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&ringparam, useraddr, sizeof(ringparam)))
+ return -EFAULT;
+
+ return ethtool_ops->set_ringparam(dev, &ringparam);
+}
+
+static int ethtool_get_pauseparam(struct net_device *dev, void *useraddr)
+{
+ struct ethtool_pauseparam pauseparam = { ETHTOOL_GPAUSEPARAM };
+
+ if (!ethtool_ops->get_pauseparam)
+ return -EOPNOTSUPP;
+
+ ethtool_ops->get_pauseparam(dev, &pauseparam);
+
+ if (copy_to_user(useraddr, &pauseparam, sizeof(pauseparam)))
+ return -EFAULT;
+ return 0;
+}
+
+static int ethtool_set_pauseparam(struct net_device *dev, void *useraddr)
+{
+ struct ethtool_pauseparam pauseparam;
+
+ if (!ethtool_ops->get_pauseparam)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&pauseparam, useraddr, sizeof(pauseparam)))
+ return -EFAULT;
+
+ return ethtool_ops->set_pauseparam(dev, &pauseparam);
+}
+
+static int ethtool_get_rx_csum(struct net_device *dev, char *useraddr)
+{
+ struct ethtool_value edata = { ETHTOOL_GRXCSUM };
+
+ if (!ethtool_ops->get_rx_csum)
+ return -EOPNOTSUPP;
+
+ edata.data = ethtool_ops->get_rx_csum(dev);
+
+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
+ return -EFAULT;
+ return 0;
+}
+
+static int ethtool_set_rx_csum(struct net_device *dev, char *useraddr)
+{
+ struct ethtool_value edata;
+
+ if (!ethtool_ops->set_rx_csum)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&edata, useraddr, sizeof(edata)))
+ return -EFAULT;
+
+ ethtool_ops->set_rx_csum(dev, edata.data);
+ return 0;
+}
+
+static int ethtool_get_tx_csum(struct net_device *dev, char *useraddr)
+{
+ struct ethtool_value edata = { ETHTOOL_GTXCSUM };
+
+ if (!ethtool_ops->get_tx_csum)
+ return -EOPNOTSUPP;
+
+ edata.data = ethtool_ops->get_tx_csum(dev);
+
+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
+ return -EFAULT;
+ return 0;
+}
+
+static int ethtool_set_tx_csum(struct net_device *dev, char *useraddr)
+{
+ struct ethtool_value edata;
+
+ if (!ethtool_ops->set_tx_csum)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&edata, useraddr, sizeof(edata)))
+ return -EFAULT;
+
+ return ethtool_ops->set_tx_csum(dev, edata.data);
+}
+
+static int ethtool_get_sg(struct net_device *dev, char *useraddr)
+{
+ struct ethtool_value edata = { ETHTOOL_GSG };
+
+ if (!ethtool_ops->get_sg)
+ return -EOPNOTSUPP;
+
+ edata.data = ethtool_ops->get_sg(dev);
+
+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
+ return -EFAULT;
+ return 0;
+}
+
+static int ethtool_set_sg(struct net_device *dev, char *useraddr)
+{
+ struct ethtool_value edata;
+
+ if (!ethtool_ops->set_sg)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&edata, useraddr, sizeof(edata)))
+ return -EFAULT;
+
+ return ethtool_ops->set_sg(dev, edata.data);
+}
+
+static int ethtool_get_tso(struct net_device *dev, char *useraddr)
+{
+ struct ethtool_value edata = { ETHTOOL_GTSO };
+
+ if (!ethtool_ops->get_tso)
+ return -EOPNOTSUPP;
+
+ edata.data = ethtool_ops->get_tso(dev);
+
+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
+ return -EFAULT;
+ return 0;
+}
+
+static int ethtool_set_tso(struct net_device *dev, char *useraddr)
+{
+ struct ethtool_value edata;
+
+ if (!ethtool_ops->set_tso)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&edata, useraddr, sizeof(edata)))
+ return -EFAULT;
+
+ return ethtool_ops->set_tso(dev, edata.data);
+}
+
+static int ethtool_self_test(struct net_device *dev, char *useraddr)
+{
+ struct ethtool_test test;
+ struct ethtool_ops *ops = ethtool_ops;
+ u64 *data;
+ int ret;
+
+ if (!ops->self_test || !ops->self_test_count)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&test, useraddr, sizeof(test)))
+ return -EFAULT;
+
+ test.len = ops->self_test_count(dev);
+ data = kmalloc(test.len * sizeof(u64), GFP_USER);
+ if (!data)
+ return -ENOMEM;
+
+ ops->self_test(dev, &test, data);
+
+ ret = -EFAULT;
+ if (copy_to_user(useraddr, &test, sizeof(test)))
+ goto out;
+ useraddr += sizeof(test);
+ if (copy_to_user(useraddr, data, test.len * sizeof(u64)))
+ goto out;
+ ret = 0;
+
+out:
+ kfree(data);
+ return ret;
+}
+
+static int ethtool_get_strings(struct net_device *dev, void *useraddr)
+{
+ struct ethtool_gstrings gstrings;
+ struct ethtool_ops *ops = ethtool_ops;
+ u8 *data;
+ int ret;
+
+ if (!ops->get_strings)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&gstrings, useraddr, sizeof(gstrings)))
+ return -EFAULT;
+
+ switch (gstrings.string_set) {
+ case ETH_SS_TEST:
+ if (!ops->self_test_count)
+ return -EOPNOTSUPP;
+ gstrings.len = ops->self_test_count(dev);
+ break;
+ case ETH_SS_STATS:
+ if (!ops->get_stats_count)
+ return -EOPNOTSUPP;
+ gstrings.len = ops->get_stats_count(dev);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ data = kmalloc(gstrings.len * ETH_GSTRING_LEN, GFP_USER);
+ if (!data)
+ return -ENOMEM;
+
+ ops->get_strings(dev, gstrings.string_set, data);
+
+ ret = -EFAULT;
+ if (copy_to_user(useraddr, &gstrings, sizeof(gstrings)))
+ goto out;
+ useraddr += sizeof(gstrings);
+ if (copy_to_user(useraddr, data, gstrings.len * ETH_GSTRING_LEN))
+ goto out;
+ ret = 0;
+
+out:
+ kfree(data);
+ return ret;
+}
+
+static int ethtool_phys_id(struct net_device *dev, void *useraddr)
+{
+ struct ethtool_value id;
+
+ if (!ethtool_ops->phys_id)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&id, useraddr, sizeof(id)))
+ return -EFAULT;
+
+ return ethtool_ops->phys_id(dev, id.data);
+}
+
+static int ethtool_get_stats(struct net_device *dev, void *useraddr)
+{
+ struct ethtool_stats stats;
+ struct ethtool_ops *ops = ethtool_ops;
+ u64 *data;
+ int ret;
+
+ if (!ops->get_ethtool_stats || !ops->get_stats_count)
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&stats, useraddr, sizeof(stats)))
+ return -EFAULT;
+
+ stats.n_stats = ops->get_stats_count(dev);
+ data = kmalloc(stats.n_stats * sizeof(u64), GFP_USER);
+ if (!data)
+ return -ENOMEM;
+
+ ops->get_ethtool_stats(dev, &stats, data);
+
+ ret = -EFAULT;
+ if (copy_to_user(useraddr, &stats, sizeof(stats)))
+ goto out;
+ useraddr += sizeof(stats);
+ if (copy_to_user(useraddr, data, stats.n_stats * sizeof(u64)))
+ goto out;
+ ret = 0;
+
+out:
+ kfree(data);
+ return ret;
+}
+
+/* The main entry point in this file. Called from net/core/dev.c */
+
+#define ETHTOOL_OPS_COMPAT
+int ethtool_ioctl(struct ifreq *ifr)
+{
+ struct net_device *dev = __dev_get_by_name(ifr->ifr_name);
+ void *useraddr = (void *)ifr->ifr_data;
+ u32 ethcmd;
+
+ /*
+ * XXX: This can be pushed down into the ethtool_* handlers that
+ * need it. Keep existing behavior for the moment.
+ */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (!dev || !netif_device_present(dev))
+ return -ENODEV;
+
+ if (copy_from_user(ðcmd, useraddr, sizeof(ethcmd)))
+ return -EFAULT;
+
+ switch (ethcmd) {
+ case ETHTOOL_GSET:
+ return ethtool_get_settings(dev, useraddr);
+ case ETHTOOL_SSET:
+ return ethtool_set_settings(dev, useraddr);
+ case ETHTOOL_GDRVINFO:
+ return ethtool_get_drvinfo(dev, useraddr);
+ case ETHTOOL_GREGS:
+ return ethtool_get_regs(dev, useraddr);
+ case ETHTOOL_GWOL:
+ return ethtool_get_wol(dev, useraddr);
+ case ETHTOOL_SWOL:
+ return ethtool_set_wol(dev, useraddr);
+ case ETHTOOL_GMSGLVL:
+ return ethtool_get_msglevel(dev, useraddr);
+ case ETHTOOL_SMSGLVL:
+ return ethtool_set_msglevel(dev, useraddr);
+ case ETHTOOL_NWAY_RST:
+ return ethtool_nway_reset(dev);
+ case ETHTOOL_GLINK:
+ return ethtool_get_link(dev, useraddr);
+ case ETHTOOL_GEEPROM:
+ return ethtool_get_eeprom(dev, useraddr);
+ case ETHTOOL_SEEPROM:
+ return ethtool_set_eeprom(dev, useraddr);
+ case ETHTOOL_GCOALESCE:
+ return ethtool_get_coalesce(dev, useraddr);
+ case ETHTOOL_SCOALESCE:
+ return ethtool_set_coalesce(dev, useraddr);
+ case ETHTOOL_GRINGPARAM:
+ return ethtool_get_ringparam(dev, useraddr);
+ case ETHTOOL_SRINGPARAM:
+ return ethtool_set_ringparam(dev, useraddr);
+ case ETHTOOL_GPAUSEPARAM:
+ return ethtool_get_pauseparam(dev, useraddr);
+ case ETHTOOL_SPAUSEPARAM:
+ return ethtool_set_pauseparam(dev, useraddr);
+ case ETHTOOL_GRXCSUM:
+ return ethtool_get_rx_csum(dev, useraddr);
+ case ETHTOOL_SRXCSUM:
+ return ethtool_set_rx_csum(dev, useraddr);
+ case ETHTOOL_GTXCSUM:
+ return ethtool_get_tx_csum(dev, useraddr);
+ case ETHTOOL_STXCSUM:
+ return ethtool_set_tx_csum(dev, useraddr);
+ case ETHTOOL_GSG:
+ return ethtool_get_sg(dev, useraddr);
+ case ETHTOOL_SSG:
+ return ethtool_set_sg(dev, useraddr);
+ case ETHTOOL_GTSO:
+ return ethtool_get_tso(dev, useraddr);
+ case ETHTOOL_STSO:
+ return ethtool_set_tso(dev, useraddr);
+ case ETHTOOL_TEST:
+ return ethtool_self_test(dev, useraddr);
+ case ETHTOOL_GSTRINGS:
+ return ethtool_get_strings(dev, useraddr);
+ case ETHTOOL_PHYS_ID:
+ return ethtool_phys_id(dev, useraddr);
+ case ETHTOOL_GSTATS:
+ return ethtool_get_stats(dev, useraddr);
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+#define mii_if_info _kc_mii_if_info
+struct _kc_mii_if_info {
+ int phy_id;
+ int advertising;
+ int phy_id_mask;
+ int reg_num_mask;
+
+ unsigned int full_duplex:1; /* is full duplex? */
+ unsigned int force_media:1; /* is autoneg. disabled? */
+
+ struct net_device *dev;
+ int (*mdio_read) (struct net_device * dev, int phy_id, int location);
+ void (*mdio_write) (struct net_device * dev, int phy_id, int location,
+ int val);
+};
+
+struct ethtool_cmd;
+struct mii_ioctl_data;
+
+#undef mii_link_ok
+#define mii_link_ok _kc_mii_link_ok
+#undef mii_nway_restart
+#define mii_nway_restart _kc_mii_nway_restart
+#undef mii_ethtool_gset
+#define mii_ethtool_gset _kc_mii_ethtool_gset
+#undef mii_ethtool_sset
+#define mii_ethtool_sset _kc_mii_ethtool_sset
+#undef mii_check_link
+#define mii_check_link _kc_mii_check_link
+extern int _kc_mii_link_ok(struct mii_if_info *mii);
+extern int _kc_mii_nway_restart(struct mii_if_info *mii);
+extern int _kc_mii_ethtool_gset(struct mii_if_info *mii,
+ struct ethtool_cmd *ecmd);
+extern int _kc_mii_ethtool_sset(struct mii_if_info *mii,
+ struct ethtool_cmd *ecmd);
+extern void _kc_mii_check_link(struct mii_if_info *mii);
+#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,4,6) )
+#undef generic_mii_ioctl
+#define generic_mii_ioctl _kc_generic_mii_ioctl
+extern int _kc_generic_mii_ioctl(struct mii_if_info *mii_if,
+ struct mii_ioctl_data *mii_data, int cmd,
+ unsigned int *duplex_changed);
+#endif /* > 2.4.6 */
+
+struct _kc_pci_dev_ext {
+ struct pci_dev *dev;
+ void *pci_drvdata;
+ struct pci_driver *driver;
+};
+
+struct _kc_net_dev_ext {
+ struct net_device *dev;
+ unsigned int carrier;
+};
+
+/**************************************/
+/* mii support */
+
+int _kc_mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
+{
+ struct net_device *dev = mii->dev;
+ u32 advert, bmcr, lpa, nego;
+
+ ecmd->supported =
+ (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
+ SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);
+
+ /* only supports twisted-pair */
+ ecmd->port = PORT_MII;
+
+ /* only supports internal transceiver */
+ ecmd->transceiver = XCVR_INTERNAL;
+
+ /* this isn't fully supported at higher layers */
+ ecmd->phy_address = mii->phy_id;
+
+ ecmd->advertising = ADVERTISED_TP | ADVERTISED_MII;
+ advert = mii->mdio_read(dev, mii->phy_id, MII_ADVERTISE);
+ if (advert & ADVERTISE_10HALF)
+ ecmd->advertising |= ADVERTISED_10baseT_Half;
+ if (advert & ADVERTISE_10FULL)
+ ecmd->advertising |= ADVERTISED_10baseT_Full;
+ if (advert & ADVERTISE_100HALF)
+ ecmd->advertising |= ADVERTISED_100baseT_Half;
+ if (advert & ADVERTISE_100FULL)
+ ecmd->advertising |= ADVERTISED_100baseT_Full;
+
+ bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
+ lpa = mii->mdio_read(dev, mii->phy_id, MII_LPA);
+ if (bmcr & BMCR_ANENABLE) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ ecmd->autoneg = AUTONEG_ENABLE;
+
+ nego = mii_nway_result(advert & lpa);
+ if (nego == LPA_100FULL || nego == LPA_100HALF)
+ ecmd->speed = SPEED_100;
+ else
+ ecmd->speed = SPEED_10;
+ if (nego == LPA_100FULL || nego == LPA_10FULL) {
+ ecmd->duplex = DUPLEX_FULL;
+ mii->full_duplex = 1;
+ } else {
+ ecmd->duplex = DUPLEX_HALF;
+ mii->full_duplex = 0;
+ }
+ } else {
+ ecmd->autoneg = AUTONEG_DISABLE;
+
+ ecmd->speed = (bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10;
+ ecmd->duplex =
+ (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
+ }
+
+ /* ignore maxtxpkt, maxrxpkt for now */
+
+ return 0;
+}
+
+int _kc_mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
+{
+ struct net_device *dev = mii->dev;
+
+ if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100)
+ return -EINVAL;
+ if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
+ return -EINVAL;
+ if (ecmd->port != PORT_MII)
+ return -EINVAL;
+ if (ecmd->transceiver != XCVR_INTERNAL)
+ return -EINVAL;
+ if (ecmd->phy_address != mii->phy_id)
+ return -EINVAL;
+ if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
+ return -EINVAL;
+
+ /* ignore supported, maxtxpkt, maxrxpkt */
+
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ u32 bmcr, advert, tmp;
+
+ if ((ecmd->advertising & (ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full)) == 0)
+ return -EINVAL;
+
+ /* advertise only what has been requested */
+ advert = mii->mdio_read(dev, mii->phy_id, MII_ADVERTISE);
+ tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
+ if (ADVERTISED_10baseT_Half)
+ tmp |= ADVERTISE_10HALF;
+ if (ADVERTISED_10baseT_Full)
+ tmp |= ADVERTISE_10FULL;
+ if (ADVERTISED_100baseT_Half)
+ tmp |= ADVERTISE_100HALF;
+ if (ADVERTISED_100baseT_Full)
+ tmp |= ADVERTISE_100FULL;
+ if (advert != tmp) {
+ mii->mdio_write(dev, mii->phy_id, MII_ADVERTISE, tmp);
+ mii->advertising = tmp;
+ }
+
+ /* turn on autonegotiation, and force a renegotiate */
+ bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
+ bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ mii->mdio_write(dev, mii->phy_id, MII_BMCR, bmcr);
+
+ mii->force_media = 0;
+ } else {
+ u32 bmcr, tmp;
+
+ /* turn off auto negotiation, set speed and duplexity */
+ bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
+ tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 | BMCR_FULLDPLX);
+ if (ecmd->speed == SPEED_100)
+ tmp |= BMCR_SPEED100;
+ if (ecmd->duplex == DUPLEX_FULL) {
+ tmp |= BMCR_FULLDPLX;
+ mii->full_duplex = 1;
+ } else
+ mii->full_duplex = 0;
+ if (bmcr != tmp)
+ mii->mdio_write(dev, mii->phy_id, MII_BMCR, tmp);
+
+ mii->force_media = 1;
+ }
+ return 0;
+}
+
+int _kc_mii_link_ok(struct mii_if_info *mii)
+{
+ /* first, a dummy read, needed to latch some MII phys */
+ mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR);
+ if (mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR) & BMSR_LSTATUS)
+ return 1;
+ return 0;
+}
+
+int _kc_mii_nway_restart(struct mii_if_info *mii)
+{
+ int bmcr;
+ int r = -EINVAL;
+
+ /* if autoneg is off, it's an error */
+ bmcr = mii->mdio_read(mii->dev, mii->phy_id, MII_BMCR);
+
+ if (bmcr & BMCR_ANENABLE) {
+ bmcr |= BMCR_ANRESTART;
+ mii->mdio_write(mii->dev, mii->phy_id, MII_BMCR, bmcr);
+ r = 0;
+ }
+
+ return r;
+}
+
+void _kc_mii_check_link(struct mii_if_info *mii)
+{
+ int cur_link = mii_link_ok(mii);
+ int prev_link = netif_carrier_ok(mii->dev);
+
+ if (cur_link && !prev_link)
+ netif_carrier_on(mii->dev);
+ else if (prev_link && !cur_link)
+ netif_carrier_off(mii->dev);
+}
+
+#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,4,6) )
+int _kc_generic_mii_ioctl(struct mii_if_info *mii_if,
+ struct mii_ioctl_data *mii_data, int cmd,
+ unsigned int *duplex_chg_out)
+{
+ int rc = 0;
+ unsigned int duplex_changed = 0;
+
+ if (duplex_chg_out)
+ *duplex_chg_out = 0;
+
+ mii_data->phy_id &= mii_if->phy_id_mask;
+ mii_data->reg_num &= mii_if->reg_num_mask;
+
+ switch (cmd) {
+ case SIOCDEVPRIVATE: /* binary compat, remove in 2.5 */
+ case SIOCGMIIPHY:
+ mii_data->phy_id = mii_if->phy_id;
+ /* fall through */
+
+ case SIOCDEVPRIVATE + 1: /* binary compat, remove in 2.5 */
+ case SIOCGMIIREG:
+ mii_data->val_out =
+ mii_if->mdio_read(mii_if->dev, mii_data->phy_id,
+ mii_data->reg_num);
+ break;
+
+ case SIOCDEVPRIVATE + 2: /* binary compat, remove in 2.5 */
+ case SIOCSMIIREG:{
+ u16 val = mii_data->val_in;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (mii_data->phy_id == mii_if->phy_id) {
+ switch (mii_data->reg_num) {
+ case MII_BMCR:{
+ unsigned int new_duplex = 0;
+ if (val &
+ (BMCR_RESET |
+ BMCR_ANENABLE))
+ mii_if->force_media = 0;
+ else
+ mii_if->force_media = 1;
+ if (mii_if->force_media &&
+ (val & BMCR_FULLDPLX))
+ new_duplex = 1;
+ if (mii_if->full_duplex !=
+ new_duplex) {
+ duplex_changed = 1;
+ mii_if->full_duplex =
+ new_duplex;
+ }
+ break;
+ }
+ case MII_ADVERTISE:
+ mii_if->advertising = val;
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
+ }
+
+ mii_if->mdio_write(mii_if->dev, mii_data->phy_id,
+ mii_data->reg_num, val);
+ break;
+ }
+
+ default:
+ rc = -EOPNOTSUPP;
+ break;
+ }
+
+ if ((rc == 0) && (duplex_chg_out) && (duplex_changed))
+ *duplex_chg_out = 1;
+
+ return rc;
+}
+#endif /* > 2.4.6 */
#include "e1000.h"
+static s32 e1000_validate_mdi_setting_generic(struct e1000_hw *hw);
+static void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw);
+static void e1000e_config_collision_dist_generic(struct e1000_hw *hw);
+
+/**
+ * e1000_init_mac_ops_generic - Initialize MAC function pointers
+ * @hw: pointer to the HW structure
+ *
+ * Setups up the function pointers to no-op functions
+ **/
+void e1000_init_mac_ops_generic(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ /* General Setup */
+ mac->ops.set_lan_id = e1000_set_lan_id_multi_port_pcie;
+ mac->ops.read_mac_addr = e1000_read_mac_addr_generic;
+ mac->ops.config_collision_dist = e1000e_config_collision_dist_generic;
+ /* LINK */
+ mac->ops.wait_autoneg = e1000_wait_autoneg;
+ /* Management */
+ mac->ops.mng_host_if_write = e1000_mng_host_if_write;
+ mac->ops.mng_write_cmd_header = e1000_mng_write_cmd_header;
+ mac->ops.mng_enable_host_if = e1000_mng_enable_host_if;
+ /* VLAN, MC, etc. */
+ mac->ops.rar_set = e1000e_rar_set;
+ mac->ops.validate_mdi_setting = e1000_validate_mdi_setting_generic;
+}
+
/**
* e1000e_get_bus_info_pcie - Get PCIe bus information
* @hw: pointer to the HW structure
{
struct e1000_mac_info *mac = &hw->mac;
struct e1000_bus_info *bus = &hw->bus;
- struct e1000_adapter *adapter = hw->adapter;
- u16 pcie_link_status, cap_offset;
+ s32 ret_val;
+ u16 pcie_link_status;
- cap_offset = adapter->pdev->pcie_cap;
- if (!cap_offset) {
+ bus->type = e1000_bus_type_pci_express;
+
+ ret_val = e1000_read_pcie_cap_reg(hw, PCIE_LINK_STATUS,
+ &pcie_link_status);
+ if (ret_val) {
bus->width = e1000_bus_width_unknown;
+ bus->speed = e1000_bus_speed_unknown;
} else {
- pci_read_config_word(adapter->pdev,
- cap_offset + PCIE_LINK_STATUS,
- &pcie_link_status);
+ switch (pcie_link_status & PCIE_LINK_SPEED_MASK) {
+ case PCIE_LINK_SPEED_2500:
+ bus->speed = e1000_bus_speed_2500;
+ break;
+ case PCIE_LINK_SPEED_5000:
+ bus->speed = e1000_bus_speed_5000;
+ break;
+ default:
+ bus->speed = e1000_bus_speed_unknown;
+ break;
+ }
+
bus->width = (enum e1000_bus_width)((pcie_link_status &
PCIE_LINK_WIDTH_MASK) >>
PCIE_LINK_WIDTH_SHIFT);
* Determines the LAN function id by reading memory-mapped registers
* and swaps the port value if requested.
**/
-void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw)
+static void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw)
{
struct e1000_bus_info *bus = &hw->bus;
u32 reg;
* @mc_addr: pointer to a multicast address
*
* Generates a multicast address hash value which is used to determine
- * the multicast filter table array address and new table value. See
- * e1000_mta_set_generic()
+ * the multicast filter table array address and new table value.
**/
static u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
{
* of MAC speed/duplex configuration. So we only need to
* configure Collision Distance in the MAC.
*/
- e1000e_config_collision_dist(hw);
+ mac->ops.config_collision_dist(hw);
/*
* Configure Flow Control now that Auto-Neg has completed.
if (E1000_TXCW_ANE & er32(TXCW)) {
status = er32(STATUS);
if (status & E1000_STATUS_LU) {
- /* SYNCH bit and IV bit are sticky, so reread rxcw. */
+ /* SYNCH bit and IV bit are sticky, so reread rxcw. */
udelay(10);
rxcw = er32(RXCW);
if (rxcw & E1000_RXCW_SYNCH) {
return ret_val;
}
- if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0)
+ if (!(nvm_data & NVM_WORD0F_PAUSE_MASK))
hw->fc.requested_mode = e1000_fc_none;
else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == NVM_WORD0F_ASM_DIR)
hw->fc.requested_mode = e1000_fc_tx_pause;
}
/**
- * e1000e_setup_link - Setup flow control and link settings
+ * e1000e_setup_link_generic - Setup flow control and link settings
* @hw: pointer to the HW structure
*
* Determines which flow control settings to use, then configures flow
* should be established. Assumes the hardware has previously been reset
* and the transmitter and receiver are not enabled.
**/
-s32 e1000e_setup_link(struct e1000_hw *hw)
+s32 e1000e_setup_link_generic(struct e1000_hw *hw)
{
- struct e1000_mac_info *mac = &hw->mac;
s32 ret_val;
/*
* In the case of the phy reset being blocked, we already have a link.
* We do not need to set it up again.
*/
- if (e1000_check_reset_block(hw))
+ if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
return 0;
/*
e_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode);
/* Call the necessary media_type subroutine to configure the link. */
- ret_val = mac->ops.setup_physical_interface(hw);
+ ret_val = hw->mac.ops.setup_physical_interface(hw);
if (ret_val)
return ret_val;
/* Take the link out of reset */
ctrl &= ~E1000_CTRL_LRST;
- e1000e_config_collision_dist(hw);
+ hw->mac.ops.config_collision_dist(hw);
ret_val = e1000_commit_fc_settings_generic(hw);
if (ret_val)
}
/**
- * e1000e_config_collision_dist - Configure collision distance
+ * e1000e_config_collision_dist_generic - Configure collision distance
* @hw: pointer to the HW structure
*
* Configures the collision distance to the default value and is used
- * during link setup. Currently no func pointer exists and all
- * implementations are handled in the generic version of this function.
+ * during link setup.
**/
-void e1000e_config_collision_dist(struct e1000_hw *hw)
+static void e1000e_config_collision_dist_generic(struct e1000_hw *hw)
{
u32 tctl;
* XON frames.
*/
fcrtl = hw->fc.low_water;
- fcrtl |= E1000_FCRTL_XONE;
+ if (hw->fc.send_xon)
+ fcrtl |= E1000_FCRTL_XONE;
+
fcrth = hw->fc.high_water;
}
ew32(FCRTL, fcrtl);
ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg);
if (ret_val)
return ret_val;
- ret_val =
- e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg);
+ ret_val = e1e_rphy(hw, PHY_LP_ABILITY,
+ &mii_nway_lp_ability_reg);
if (ret_val)
return ret_val;
* Sets the speed and duplex to gigabit full duplex (the only possible option)
* for fiber/serdes links.
**/
-s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed,
- u16 *duplex)
+s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw,
+ u16 *speed, u16 *duplex)
{
*speed = SPEED_1000;
*duplex = FULL_DUPLEX;
}
/**
- * e1000e_id_led_init -
+ * e1000e_id_led_init_generic -
* @hw: pointer to the HW structure
*
**/
-s32 e1000e_id_led_init(struct e1000_hw *hw)
+s32 e1000e_id_led_init_generic(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
s32 ret_val;
}
}
} else {
- if (mac->in_ifs_mode &&
- (mac->tx_packet_delta <= MIN_NUM_XMITS)) {
+ if (mac->in_ifs_mode && (mac->tx_packet_delta <= MIN_NUM_XMITS)) {
mac->current_ifs_val = 0;
mac->in_ifs_mode = false;
ew32(AIT, 0);
}
}
}
+
+/**
+ * e1000_validate_mdi_setting_generic - Verify MDI/MDIx settings
+ * @hw: pointer to the HW structure
+ *
+ * Verify that when not using auto-negotiation that MDI/MDIx is correctly
+ * set, which is forced to MDI mode only.
+ **/
+static s32 e1000_validate_mdi_setting_generic(struct e1000_hw *hw)
+{
+ if (!hw->mac.autoneg && (hw->phy.mdix == 0 || hw->phy.mdix == 3)) {
+ e_dbg("Invalid MDI setting detected\n");
+ hw->phy.mdix = 1;
+ return -E1000_ERR_CONFIG;
+ }
+
+ return 0;
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2012 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_MAC_H_
+#define _E1000_MAC_H_
+
+/*
+ * Functions that should not be called directly from drivers but can be used
+ * by other files in this 'shared code'
+ */
+void e1000_init_mac_ops_generic(struct e1000_hw *hw);
+s32 e1000e_blink_led_generic(struct e1000_hw *hw);
+s32 e1000e_check_for_copper_link(struct e1000_hw *hw);
+s32 e1000e_check_for_fiber_link(struct e1000_hw *hw);
+s32 e1000e_check_for_serdes_link(struct e1000_hw *hw);
+s32 e1000e_cleanup_led_generic(struct e1000_hw *hw);
+s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw);
+s32 e1000e_disable_pcie_master(struct e1000_hw *hw);
+s32 e1000e_force_mac_fc(struct e1000_hw *hw);
+s32 e1000e_get_auto_rd_done(struct e1000_hw *hw);
+s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw);
+void e1000_set_lan_id_single_port(struct e1000_hw *hw);
+s32 e1000e_get_hw_semaphore(struct e1000_hw *hw);
+s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex);
+s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw,
+ u16 *speed, u16 *duplex);
+s32 e1000e_id_led_init_generic(struct e1000_hw *hw);
+s32 e1000e_led_on_generic(struct e1000_hw *hw);
+s32 e1000e_led_off_generic(struct e1000_hw *hw);
+void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
+ u8 *mc_addr_list, u32 mc_addr_count);
+s32 e1000e_set_fc_watermarks(struct e1000_hw *hw);
+s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw);
+s32 e1000e_setup_led_generic(struct e1000_hw *hw);
+s32 e1000e_setup_link_generic(struct e1000_hw *hw);
+
+void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw);
+void e1000_clear_vfta_generic(struct e1000_hw *hw);
+void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
+void e1000_pcix_mmrbc_workaround_generic(struct e1000_hw *hw);
+void e1000e_put_hw_semaphore(struct e1000_hw *hw);
+void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
+s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw);
+void e1000e_reset_adaptive(struct e1000_hw *hw);
+void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop);
+void e1000e_update_adaptive(struct e1000_hw *hw);
+void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
+
+#endif
#include "e1000.h"
-enum e1000_mng_mode {
- e1000_mng_mode_none = 0,
- e1000_mng_mode_asf,
- e1000_mng_mode_pt,
- e1000_mng_mode_ipmi,
- e1000_mng_mode_host_if_only
-};
-
-#define E1000_FACTPS_MNGCG 0x20000000
-
-/* Intel(R) Active Management Technology signature */
-#define E1000_IAMT_SIGNATURE 0x544D4149
-
/**
* e1000_calculate_checksum - Calculate checksum for buffer
* @buffer: pointer to EEPROM
if (!buffer)
return 0;
-
for (i = 0; i < length; i++)
sum += buffer[i];
* and also checks whether the previous command is completed. It busy waits
* in case of previous command is not completed.
**/
-static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
+s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
{
u32 hicr;
u8 i;
/* Check that the host interface is enabled. */
hicr = er32(HICR);
- if ((hicr & E1000_HICR_EN) == 0) {
+ if (!(hicr & E1000_HICR_EN)) {
e_dbg("E1000_HOST_EN bit disabled.\n");
return -E1000_ERR_HOST_INTERFACE_COMMAND;
}
}
/**
- * e1000e_check_mng_mode_generic - check management mode
+ * e1000e_check_mng_mode_generic - Generic check management mode
* @hw: pointer to the HW structure
*
* Reads the firmware semaphore register and returns true (>0) if
hw->mac.tx_pkt_filtering = true;
/* No manageability, no filtering */
- if (!e1000e_check_mng_mode(hw)) {
+ if (!hw->mac.ops.check_mng_mode(hw)) {
hw->mac.tx_pkt_filtering = false;
return hw->mac.tx_pkt_filtering;
}
* If we can't read from the host interface for whatever
* reason, disable filtering.
*/
- ret_val = e1000_mng_enable_host_if(hw);
+ ret_val = hw->mac.ops.mng_enable_host_if(hw);
if (ret_val) {
hw->mac.tx_pkt_filtering = false;
return hw->mac.tx_pkt_filtering;
*
* Writes the command header after does the checksum calculation.
**/
-static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
- struct e1000_host_mng_command_header *hdr)
+s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
+ struct e1000_host_mng_command_header *hdr)
{
u16 i, length = sizeof(struct e1000_host_mng_command_header);
* It also does alignment considerations to do the writes in most efficient
* way. Also fills up the sum of the buffer in *buffer parameter.
**/
-static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer,
- u16 length, u16 offset, u8 *sum)
+s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer,
+ u16 length, u16 offset, u8 *sum)
{
u8 *tmp;
u8 *bufptr = buffer;
hdr.checksum = 0;
/* Enable the host interface */
- ret_val = e1000_mng_enable_host_if(hw);
+ ret_val = hw->mac.ops.mng_enable_host_if(hw);
if (ret_val)
return ret_val;
/* Populate the host interface with the contents of "buffer". */
- ret_val = e1000_mng_host_if_write(hw, buffer, length,
- sizeof(hdr), &(hdr.checksum));
+ ret_val = hw->mac.ops.mng_host_if_write(hw, buffer, length,
+ sizeof(hdr), &(hdr.checksum));
if (ret_val)
return ret_val;
/* Write the manageability command header */
- ret_val = e1000_mng_write_cmd_header(hw, &hdr);
+ ret_val = hw->mac.ops.mng_write_cmd_header(hw, &hdr);
if (ret_val)
return ret_val;
((data & E1000_NVM_INIT_CTRL2_MNGM) ==
(e1000_mng_mode_pt << 13)))
return true;
- } else if ((manc & E1000_MANC_SMBUS_EN) &&
- !(manc & E1000_MANC_ASF_EN)) {
+ } else if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN)) {
return true;
}
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2012 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_MANAGE_H_
+#define _E1000_MANAGE_H_
+
+bool e1000e_check_mng_mode_generic(struct e1000_hw *hw);
+bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw);
+s32 e1000_mng_enable_host_if(struct e1000_hw *hw);
+s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer,
+ u16 length, u16 offset, u8 *sum);
+s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
+ struct e1000_host_mng_command_header *hdr);
+s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length);
+bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw);
+
+enum e1000_mng_mode {
+ e1000_mng_mode_none = 0,
+ e1000_mng_mode_asf,
+ e1000_mng_mode_pt,
+ e1000_mng_mode_ipmi,
+ e1000_mng_mode_host_if_only
+};
+
+#define E1000_FACTPS_MNGCG 0x20000000
+
+#define E1000_FWSM_MODE_MASK 0xE
+#define E1000_FWSM_MODE_SHIFT 1
+
+#define E1000_MNG_IAMT_MODE 0x3
+#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10
+#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0
+#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10
+#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64
+#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING 0x1
+#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2
+
+#define E1000_VFTA_ENTRY_SHIFT 5
+#define E1000_VFTA_ENTRY_MASK 0x7F
+#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F
+
+#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Num of bytes in range */
+#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Num of dwords in range */
+#define E1000_HI_COMMAND_TIMEOUT 500 /* Process HI cmd limit */
+#define E1000_HICR_EN 0x01 /* Enable bit - RO */
+/* Driver sets this bit when done to put command in RAM */
+#define E1000_HICR_C 0x02
+#define E1000_HICR_SV 0x04 /* Status Validity */
+#define E1000_HICR_FW_RESET_ENABLE 0x40
+#define E1000_HICR_FW_RESET 0x80
+
+/* Intel(R) Active Management Technology signature */
+#define E1000_IAMT_SIGNATURE 0x544D4149
+
+#endif
#include <linux/tcp.h>
#include <linux/ipv6.h>
#include <linux/slab.h>
+#ifdef NETIF_F_TSO
#include <net/checksum.h>
+#ifdef NETIF_F_TSO6
#include <net/ip6_checksum.h>
+#endif
+#endif
#include <linux/mii.h>
#include <linux/ethtool.h>
+#ifdef NETIF_F_HW_VLAN_TX
#include <linux/if_vlan.h>
-#include <linux/cpu.h>
-#include <linux/smp.h>
-#include <linux/pm_qos_params.h>
-#include <linux/pm_runtime.h>
-#include <linux/aer.h>
+#endif
#include <linux/prefetch.h>
#include "e1000.h"
-#define DRV_EXTRAVERSION "-k"
+#ifdef CONFIG_E1000E_NAPI
+#define DRV_EXTRAVERSION "" "-NAPI"
+#else
+#define DRV_EXTRAVERSION ""
+#endif
-#define DRV_VERSION "1.9.5" DRV_EXTRAVERSION
+#define DRV_VERSION "2.0.0.1" DRV_EXTRAVERSION
char e1000e_driver_name[] = "e1000e";
const char e1000e_driver_version[] = DRV_VERSION;
+#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
+static int debug = -1;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state);
-static int e1000_set_features(struct net_device *netdev,
- netdev_features_t features);
+
+static s32 e1000_get_variants_82571(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ static int global_quad_port_a; /* global port a indication */
+ struct pci_dev *pdev = adapter->pdev;
+ int is_port_b = er32(STATUS) & E1000_STATUS_FUNC_1;
+
+ /* tag quad port adapters first, it's used below */
+ switch (pdev->device) {
+ case E1000_DEV_ID_82571EB_QUAD_COPPER:
+ case E1000_DEV_ID_82571EB_QUAD_FIBER:
+ case E1000_DEV_ID_82571EB_QUAD_COPPER_LP:
+ case E1000_DEV_ID_82571PT_QUAD_COPPER:
+ adapter->flags |= FLAG_IS_QUAD_PORT;
+ /* mark the first port */
+ if (global_quad_port_a == 0)
+ adapter->flags |= FLAG_IS_QUAD_PORT_A;
+ /* Reset for multiple quad port adapters */
+ global_quad_port_a++;
+ if (global_quad_port_a == 4)
+ global_quad_port_a = 0;
+ break;
+ default:
+ break;
+ }
+
+ switch (adapter->hw.mac.type) {
+ case e1000_82571:
+ /* these dual ports don't have WoL on port B at all */
+ if (((pdev->device == E1000_DEV_ID_82571EB_FIBER) ||
+ (pdev->device == E1000_DEV_ID_82571EB_SERDES) ||
+ (pdev->device == E1000_DEV_ID_82571EB_COPPER)) &&
+ (is_port_b))
+ adapter->flags &= ~FLAG_HAS_WOL;
+ /* quad ports only support WoL on port A */
+ if (adapter->flags & FLAG_IS_QUAD_PORT &&
+ (!(adapter->flags & FLAG_IS_QUAD_PORT_A)))
+ adapter->flags &= ~FLAG_HAS_WOL;
+ /* Does not support WoL on any port */
+ if (pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD)
+ adapter->flags &= ~FLAG_HAS_WOL;
+ break;
+ case e1000_82573:
+ if (pdev->device == E1000_DEV_ID_82573L) {
+ adapter->flags |= FLAG_HAS_JUMBO_FRAMES;
+ adapter->max_hw_frame_size = DEFAULT_JUMBO;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static struct e1000_info e1000_82571_info = {
+ .mac = e1000_82571,
+ .flags = FLAG_HAS_HW_VLAN_FILTER
+ | FLAG_HAS_JUMBO_FRAMES | FLAG_HAS_WOL | FLAG_APME_IN_CTRL3
+#ifndef HAVE_NDO_SET_FEATURES
+ | FLAG_RX_CSUM_ENABLED
+#endif
+ | FLAG_HAS_CTRLEXT_ON_LOAD | FLAG_HAS_SMART_POWER_DOWN | FLAG_RESET_OVERWRITES_LAA /* errata */
+ | FLAG_TARC_SPEED_MODE_BIT /* errata */
+ | FLAG_APME_CHECK_PORT_B,
+ .flags2 = FLAG2_DISABLE_ASPM_L1 /* errata 13 */
+ | FLAG2_DMA_BURST,
+ .pba = 38,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .init_ops = e1000_init_function_pointers_82571,
+ .get_variants = e1000_get_variants_82571,
+};
+
+static struct e1000_info e1000_82572_info = {
+ .mac = e1000_82572,
+ .flags = FLAG_HAS_HW_VLAN_FILTER
+ | FLAG_HAS_JUMBO_FRAMES | FLAG_HAS_WOL | FLAG_APME_IN_CTRL3
+#ifndef HAVE_NDO_SET_FEATURES
+ | FLAG_RX_CSUM_ENABLED
+#endif
+ | FLAG_HAS_CTRLEXT_ON_LOAD | FLAG_TARC_SPEED_MODE_BIT, /* errata */
+ .flags2 = FLAG2_DISABLE_ASPM_L1 /* errata 13 */
+ | FLAG2_DMA_BURST,
+ .pba = 38,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .init_ops = e1000_init_function_pointers_82571,
+ .get_variants = e1000_get_variants_82571,
+};
+
+static struct e1000_info e1000_82573_info = {
+ .mac = e1000_82573,
+ .flags = FLAG_HAS_HW_VLAN_FILTER | FLAG_HAS_WOL | FLAG_APME_IN_CTRL3
+#ifndef HAVE_NDO_SET_FEATURES
+ | FLAG_RX_CSUM_ENABLED
+#endif
+ | FLAG_HAS_SMART_POWER_DOWN | FLAG_HAS_AMT | FLAG_HAS_SWSM_ON_LOAD,
+ .flags2 = FLAG2_DISABLE_ASPM_L1 | FLAG2_DISABLE_ASPM_L0S,
+ .pba = 20,
+ .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN,
+ .init_ops = e1000_init_function_pointers_82571,
+ .get_variants = e1000_get_variants_82571,
+};
+
+static struct e1000_info e1000_82574_info = {
+ .mac = e1000_82574,
+ .flags = FLAG_HAS_HW_VLAN_FILTER
+ | FLAG_HAS_MSIX
+ | FLAG_HAS_JUMBO_FRAMES | FLAG_HAS_WOL | FLAG_APME_IN_CTRL3
+#ifndef HAVE_NDO_SET_FEATURES
+ | FLAG_RX_CSUM_ENABLED
+#endif
+ | FLAG_HAS_SMART_POWER_DOWN
+ | FLAG_HAS_AMT | FLAG_HAS_CTRLEXT_ON_LOAD,
+ .flags2 = FLAG2_CHECK_PHY_HANG
+ | FLAG2_DISABLE_ASPM_L0S | FLAG2_NO_DISABLE_RX | FLAG2_DMA_BURST,
+ .pba = 32,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .init_ops = e1000_init_function_pointers_82571,
+ .get_variants = e1000_get_variants_82571,
+};
+
+static struct e1000_info e1000_82583_info = {
+ .mac = e1000_82583,
+ .flags = FLAG_HAS_HW_VLAN_FILTER | FLAG_HAS_WOL | FLAG_APME_IN_CTRL3
+#ifndef HAVE_NDO_SET_FEATURES
+ | FLAG_RX_CSUM_ENABLED
+#endif
+ | FLAG_HAS_SMART_POWER_DOWN
+ | FLAG_HAS_AMT | FLAG_HAS_JUMBO_FRAMES | FLAG_HAS_CTRLEXT_ON_LOAD,
+ .flags2 = FLAG2_DISABLE_ASPM_L0S | FLAG2_NO_DISABLE_RX,
+ .pba = 32,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .init_ops = e1000_init_function_pointers_82571,
+ .get_variants = e1000_get_variants_82571,
+};
+
+static struct e1000_info e1000_es2_info = {
+ .mac = e1000_80003es2lan,
+ .flags = FLAG_HAS_HW_VLAN_FILTER
+ | FLAG_HAS_JUMBO_FRAMES | FLAG_HAS_WOL | FLAG_APME_IN_CTRL3
+#ifndef HAVE_NDO_SET_FEATURES
+ | FLAG_RX_CSUM_ENABLED
+#endif
+ | FLAG_HAS_CTRLEXT_ON_LOAD | FLAG_RX_NEEDS_RESTART /* errata */
+ | FLAG_TARC_SET_BIT_ZERO /* errata */
+ | FLAG_APME_CHECK_PORT_B | FLAG_DISABLE_FC_PAUSE_TIME, /* errata */
+ .flags2 = FLAG2_DMA_BURST,
+ .pba = 38,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .init_ops = e1000_init_function_pointers_80003es2lan,
+ .get_variants = NULL,
+};
+
+static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /*
+ * Disable Jumbo Frame support on parts with Intel 10/100 PHY or
+ * on parts with MACsec enabled in NVM (reflected in CTRL_EXT).
+ */
+ if ((adapter->hw.phy.type == e1000_phy_ife) ||
+ ((adapter->hw.mac.type >= e1000_pch2lan) &&
+ (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LSECCK)))) {
+ adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES;
+ adapter->max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN;
+
+ hw->mac.ops.blink_led = NULL;
+ }
+
+ if ((adapter->hw.mac.type == e1000_ich8lan) &&
+ (adapter->hw.phy.type != e1000_phy_ife))
+ adapter->flags |= FLAG_LSC_GIG_SPEED_DROP;
+
+ /* Enable workaround for 82579 w/ ME enabled */
+ if ((adapter->hw.mac.type == e1000_pch2lan) &&
+ (er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+ adapter->flags2 |= FLAG2_PCIM2PCI_ARBITER_WA;
+
+ return 0;
+}
+
+static struct e1000_info e1000_ich8_info = {
+ .mac = e1000_ich8lan,
+ .flags = FLAG_HAS_WOL | FLAG_IS_ICH
+#ifndef HAVE_NDO_SET_FEATURES
+ | FLAG_RX_CSUM_ENABLED
+#endif
+ | FLAG_HAS_CTRLEXT_ON_LOAD
+ | FLAG_HAS_AMT | FLAG_HAS_FLASH | FLAG_APME_IN_WUC,
+ .pba = 8,
+ .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN,
+ .init_ops = e1000_init_function_pointers_ich8lan,
+ .get_variants = e1000_get_variants_ich8lan,
+};
+
+static struct e1000_info e1000_ich9_info = {
+ .mac = e1000_ich9lan,
+ .flags = FLAG_HAS_JUMBO_FRAMES | FLAG_IS_ICH | FLAG_HAS_WOL
+#ifndef HAVE_NDO_SET_FEATURES
+ | FLAG_RX_CSUM_ENABLED
+#endif
+ | FLAG_HAS_CTRLEXT_ON_LOAD
+ | FLAG_HAS_AMT | FLAG_HAS_FLASH | FLAG_APME_IN_WUC,
+ .pba = 18,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .init_ops = e1000_init_function_pointers_ich8lan,
+ .get_variants = e1000_get_variants_ich8lan,
+};
+
+static struct e1000_info e1000_ich10_info = {
+ .mac = e1000_ich10lan,
+ .flags = FLAG_HAS_JUMBO_FRAMES | FLAG_IS_ICH | FLAG_HAS_WOL
+#ifndef HAVE_NDO_SET_FEATURES
+ | FLAG_RX_CSUM_ENABLED
+#endif
+ | FLAG_HAS_CTRLEXT_ON_LOAD
+ | FLAG_HAS_AMT | FLAG_HAS_FLASH | FLAG_APME_IN_WUC,
+ .pba = 18,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .init_ops = e1000_init_function_pointers_ich8lan,
+ .get_variants = e1000_get_variants_ich8lan,
+};
+
+static struct e1000_info e1000_pch_info = {
+ .mac = e1000_pchlan,
+ .flags = FLAG_IS_ICH | FLAG_HAS_WOL
+#ifndef HAVE_NDO_SET_FEATURES
+ | FLAG_RX_CSUM_ENABLED
+#endif
+ | FLAG_HAS_CTRLEXT_ON_LOAD | FLAG_HAS_AMT | FLAG_HAS_FLASH | FLAG_HAS_JUMBO_FRAMES | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
+ | FLAG_APME_IN_WUC,
+ .flags2 = FLAG2_HAS_PHY_STATS,
+ .pba = 26,
+ .max_hw_frame_size = 4096,
+ .init_ops = e1000_init_function_pointers_ich8lan,
+ .get_variants = e1000_get_variants_ich8lan,
+};
+
+static struct e1000_info e1000_pch2_info = {
+ .mac = e1000_pch2lan,
+ .flags = FLAG_IS_ICH | FLAG_HAS_WOL
+#ifndef HAVE_NDO_SET_FEATURES
+ | FLAG_RX_CSUM_ENABLED
+#endif
+ | FLAG_HAS_CTRLEXT_ON_LOAD
+ | FLAG_HAS_AMT
+ | FLAG_HAS_FLASH | FLAG_HAS_JUMBO_FRAMES | FLAG_APME_IN_WUC,
+ .flags2 = FLAG2_HAS_PHY_STATS | FLAG2_HAS_EEE,
+ .pba = 26,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .init_ops = e1000_init_function_pointers_ich8lan,
+ .get_variants = e1000_get_variants_ich8lan,
+};
+
+static struct e1000_info e1000_pch_lpt_info = {
+ .mac = e1000_pch_lpt,
+ .flags = FLAG_IS_ICH | FLAG_HAS_WOL
+#ifndef HAVE_NDO_SET_FEATURES
+ | FLAG_RX_CSUM_ENABLED
+#endif
+ | FLAG_HAS_CTRLEXT_ON_LOAD
+ | FLAG_HAS_AMT
+ | FLAG_HAS_FLASH | FLAG_HAS_JUMBO_FRAMES | FLAG_APME_IN_WUC,
+ .flags2 = FLAG2_HAS_PHY_STATS | FLAG2_HAS_EEE,
+ .pba = 26,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .init_ops = e1000_init_function_pointers_ich8lan,
+ .get_variants = e1000_get_variants_ich8lan,
+};
static const struct e1000_info *e1000_info_tbl[] = {
- [board_82571] = &e1000_82571_info,
- [board_82572] = &e1000_82572_info,
- [board_82573] = &e1000_82573_info,
- [board_82574] = &e1000_82574_info,
- [board_82583] = &e1000_82583_info,
- [board_80003es2lan] = &e1000_es2_info,
- [board_ich8lan] = &e1000_ich8_info,
- [board_ich9lan] = &e1000_ich9_info,
- [board_ich10lan] = &e1000_ich10_info,
- [board_pchlan] = &e1000_pch_info,
- [board_pch2lan] = &e1000_pch2_info,
+ [board_82571] = &e1000_82571_info,
+ [board_82572] = &e1000_82572_info,
+ [board_82573] = &e1000_82573_info,
+ [board_82574] = &e1000_82574_info,
+ [board_82583] = &e1000_82583_info,
+ [board_80003es2lan] = &e1000_es2_info,
+ [board_ich8lan] = &e1000_ich8_info,
+ [board_ich9lan] = &e1000_ich9_info,
+ [board_ich10lan] = &e1000_ich10_info,
+ [board_pchlan] = &e1000_pch_info,
+ [board_pch2lan] = &e1000_pch2_info,
+ [board_pch_lpt] = &e1000_pch_lpt_info,
};
struct e1000_reg_info {
/* Rx Registers */
{E1000_RCTL, "RCTL"},
- {E1000_RDLEN, "RDLEN"},
- {E1000_RDH, "RDH"},
- {E1000_RDT, "RDT"},
+ {E1000_RDLEN(0), "RDLEN"},
+ {E1000_RDH(0), "RDH"},
+ {E1000_RDT(0), "RDT"},
{E1000_RDTR, "RDTR"},
{E1000_RXDCTL(0), "RXDCTL"},
{E1000_ERT, "ERT"},
- {E1000_RDBAL, "RDBAL"},
- {E1000_RDBAH, "RDBAH"},
+ {E1000_RDBAL(0), "RDBAL"},
+ {E1000_RDBAH(0), "RDBAH"},
{E1000_RDFH, "RDFH"},
{E1000_RDFT, "RDFT"},
{E1000_RDFHS, "RDFHS"},
/* Tx Registers */
{E1000_TCTL, "TCTL"},
- {E1000_TDBAL, "TDBAL"},
- {E1000_TDBAH, "TDBAH"},
- {E1000_TDLEN, "TDLEN"},
- {E1000_TDH, "TDH"},
- {E1000_TDT, "TDT"},
+ {E1000_TDBAL(0), "TDBAL"},
+ {E1000_TDBAH(0), "TDBAH"},
+ {E1000_TDLEN(0), "TDLEN"},
+ {E1000_TDH(0), "TDH"},
+ {E1000_TDT(0), "TDT"},
{E1000_TIDV, "TIDV"},
{E1000_TXDCTL(0), "TXDCTL"},
{E1000_TADV, "TADV"},
/* Print netdevice Info */
if (netdev) {
- dev_info(&adapter->pdev->dev, "Net device Info\n");
+ dev_info(pci_dev_to_dev(adapter->pdev), "Net device Info\n");
pr_info("Device Name state trans_start last_rx\n");
- pr_info("%-15s %016lX %016lX %016lX\n",
- netdev->name, netdev->state, netdev->trans_start,
- netdev->last_rx);
+ pr_info("%-15s %016lX %016lX %016lX\n", netdev->name,
+ netdev->state, netdev->trans_start, netdev->last_rx);
}
/* Print Registers */
- dev_info(&adapter->pdev->dev, "Register Dump\n");
+ dev_info(pci_dev_to_dev(adapter->pdev), "Register Dump\n");
pr_info(" Register Name Value\n");
for (reginfo = (struct e1000_reg_info *)e1000_reg_info_tbl;
reginfo->name; reginfo++) {
if (!netdev || !netif_running(netdev))
return;
- dev_info(&adapter->pdev->dev, "Tx Ring Summary\n");
+ dev_info(pci_dev_to_dev(adapter->pdev), "Tx Ring Summary\n");
pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n");
buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean];
pr_info(" %5d %5X %5X %016llX %04X %3X %016llX\n",
if (!netif_msg_tx_done(adapter))
goto rx_ring_summary;
- dev_info(&adapter->pdev->dev, "Tx Ring Dump\n");
+ dev_info(pci_dev_to_dev(adapter->pdev), "Tx Ring Dump\n");
/* Transmit Descriptor Formats - DEXT[29] is 0 (Legacy) or 1 (Extended)
*
else
next_desc = "";
pr_info("T%c[0x%03X] %016llX %016llX %016llX %04X %3X %016llX %p%s\n",
- (!(le64_to_cpu(u0->b) & (1 << 29)) ? 'l' :
- ((le64_to_cpu(u0->b) & (1 << 20)) ? 'd' : 'c')),
- i,
- (unsigned long long)le64_to_cpu(u0->a),
- (unsigned long long)le64_to_cpu(u0->b),
- (unsigned long long)buffer_info->dma,
- buffer_info->length, buffer_info->next_to_watch,
- (unsigned long long)buffer_info->time_stamp,
- buffer_info->skb, next_desc);
+ (!(le64_to_cpu(u0->b) & (1 << 29)) ? 'l'
+ : ((le64_to_cpu(u0->b) & (1 << 20)) ? 'd' : 'c')), i,
+ (unsigned long long)le64_to_cpu(u0->a),
+ (unsigned long long)le64_to_cpu(u0->b),
+ (unsigned long long)buffer_info->dma, buffer_info->length,
+ buffer_info->next_to_watch,
+ (unsigned long long)buffer_info->time_stamp,
+ buffer_info->skb, next_desc);
if (netif_msg_pktdata(adapter) && buffer_info->dma != 0)
print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS,
/* Print Rx Ring Summary */
rx_ring_summary:
- dev_info(&adapter->pdev->dev, "Rx Ring Summary\n");
+ dev_info(pci_dev_to_dev(adapter->pdev), "Rx Ring Summary\n");
pr_info("Queue [NTU] [NTC]\n");
pr_info(" %5d %5X %5X\n",
0, rx_ring->next_to_use, rx_ring->next_to_clean);
if (!netif_msg_rx_status(adapter))
return;
- dev_info(&adapter->pdev->dev, "Rx Ring Dump\n");
+ dev_info(pci_dev_to_dev(adapter->pdev), "Rx Ring Dump\n");
switch (adapter->rx_ps_pages) {
case 1:
case 2:
if (staterr & E1000_RXD_STAT_DD) {
/* Descriptor Done */
pr_info("%s[0x%03X] %016llX %016llX %016llX %016llX ---------------- %p%s\n",
- "RWB", i,
- (unsigned long long)le64_to_cpu(u1->a),
- (unsigned long long)le64_to_cpu(u1->b),
- (unsigned long long)le64_to_cpu(u1->c),
- (unsigned long long)le64_to_cpu(u1->d),
- buffer_info->skb, next_desc);
+ "RWB", i,
+ (unsigned long long)le64_to_cpu(u1->a),
+ (unsigned long long)le64_to_cpu(u1->b),
+ (unsigned long long)le64_to_cpu(u1->c),
+ (unsigned long long)le64_to_cpu(u1->d),
+ buffer_info->skb, next_desc);
} else {
pr_info("%s[0x%03X] %016llX %016llX %016llX %016llX %016llX %p%s\n",
- "R ", i,
- (unsigned long long)le64_to_cpu(u1->a),
- (unsigned long long)le64_to_cpu(u1->b),
- (unsigned long long)le64_to_cpu(u1->c),
- (unsigned long long)le64_to_cpu(u1->d),
- (unsigned long long)buffer_info->dma,
- buffer_info->skb, next_desc);
+ "R ", i,
+ (unsigned long long)le64_to_cpu(u1->a),
+ (unsigned long long)le64_to_cpu(u1->b),
+ (unsigned long long)le64_to_cpu(u1->c),
+ (unsigned long long)le64_to_cpu(u1->d),
+ (unsigned long long)buffer_info->dma,
+ buffer_info->skb, next_desc);
if (netif_msg_pktdata(adapter))
print_hex_dump(KERN_INFO, "",
- DUMP_PREFIX_ADDRESS, 16, 1,
- phys_to_virt(buffer_info->dma),
- adapter->rx_ps_bsize0, true);
+ DUMP_PREFIX_ADDRESS, 16,
+ 1,
+ phys_to_virt
+ (buffer_info->dma),
+ adapter->rx_ps_bsize0,
+ true);
}
}
break;
if (staterr & E1000_RXD_STAT_DD) {
/* Descriptor Done */
pr_info("%s[0x%03X] %016llX %016llX ---------------- %p%s\n",
- "RWB", i,
- (unsigned long long)le64_to_cpu(u1->a),
- (unsigned long long)le64_to_cpu(u1->b),
- buffer_info->skb, next_desc);
+ "RWB", i,
+ (unsigned long long)le64_to_cpu(u1->a),
+ (unsigned long long)le64_to_cpu(u1->b),
+ buffer_info->skb, next_desc);
} else {
pr_info("%s[0x%03X] %016llX %016llX %016llX %p%s\n",
- "R ", i,
- (unsigned long long)le64_to_cpu(u1->a),
- (unsigned long long)le64_to_cpu(u1->b),
- (unsigned long long)buffer_info->dma,
- buffer_info->skb, next_desc);
+ "R ", i,
+ (unsigned long long)le64_to_cpu(u1->a),
+ (unsigned long long)le64_to_cpu(u1->b),
+ (unsigned long long)buffer_info->dma,
+ buffer_info->skb, next_desc);
if (netif_msg_pktdata(adapter))
print_hex_dump(KERN_INFO, "",
struct net_device *netdev, struct sk_buff *skb,
u8 status, __le16 vlan)
{
+#ifndef CONFIG_E1000E_NAPI
+ int ret;
+#endif
+#ifndef HAVE_VLAN_RX_REGISTER
u16 tag = le16_to_cpu(vlan);
+#endif
skb->protocol = eth_type_trans(skb, netdev);
+#ifdef CONFIG_E1000E_NAPI
+#ifdef HAVE_VLAN_RX_REGISTER
+#ifdef NETIF_F_HW_VLAN_TX
+ if (adapter->vlgrp && (status & E1000_RXD_STAT_VP))
+ vlan_gro_receive(&adapter->napi, adapter->vlgrp,
+ le16_to_cpu(vlan), skb);
+ else
+#endif /* NETIF_F_HW_VLAN_TX */
+ napi_gro_receive(&adapter->napi, skb);
+#else /* HAVE_VLAN_RX_REGISTER */
if (status & E1000_RXD_STAT_VP)
__vlan_hwaccel_put_tag(skb, tag);
napi_gro_receive(&adapter->napi, skb);
+#endif /* HAVE_VLAN_RX_REGISTER */
+#else /* CONFIG_E1000E_NAPI */
+#ifdef NETIF_F_HW_VLAN_TX
+ if (adapter->vlgrp && (status & E1000_RXD_STAT_VP))
+ ret = vlan_hwaccel_rx(skb, adapter->vlgrp, le16_to_cpu(vlan));
+ else
+#endif
+ ret = netif_rx(skb);
+ if (unlikely(ret == NET_RX_DROP))
+ adapter->rx_dropped_backlog++;
+#endif /* CONFIG_E1000E_NAPI */
+#ifndef NETIF_F_GRO
+
+ netdev->last_rx = jiffies;
+#endif
}
/**
skb_checksum_none_assert(skb);
/* Rx checksum disabled */
+#ifdef HAVE_NDO_SET_FEATURES
if (!(adapter->netdev->features & NETIF_F_RXCSUM))
+#else
+ if (!(adapter->flags & FLAG_RX_CSUM_ENABLED))
+#endif
return;
/* Ignore Checksum bit is set */
adapter->hw_csum_good++;
}
-/**
- * e1000e_update_tail_wa - helper function for e1000e_update_[rt]dt_wa()
- * @hw: pointer to the HW structure
- * @tail: address of tail descriptor register
- * @i: value to write to tail descriptor register
- *
- * When updating the tail register, the ME could be accessing Host CSR
- * registers at the same time. Normally, this is handled in h/w by an
- * arbiter but on some parts there is a bug that acknowledges Host accesses
- * later than it should which could result in the descriptor register to
- * have an incorrect value. Workaround this by checking the FWSM register
- * which has bit 24 set while ME is accessing Host CSR registers, wait
- * if it is set and try again a number of times.
- **/
-static inline s32 e1000e_update_tail_wa(struct e1000_hw *hw, void __iomem *tail,
- unsigned int i)
-{
- unsigned int j = 0;
-
- while ((j++ < E1000_ICH_FWSM_PCIM2PCI_COUNT) &&
- (er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI))
- udelay(50);
-
- writel(i, tail);
-
- if ((j == E1000_ICH_FWSM_PCIM2PCI_COUNT) && (i != readl(tail)))
- return E1000_ERR_SWFW_SYNC;
-
- return 0;
-}
-
static void e1000e_update_rdt_wa(struct e1000_ring *rx_ring, unsigned int i)
{
struct e1000_adapter *adapter = rx_ring->adapter;
struct e1000_hw *hw = &adapter->hw;
+ s32 ret_val = __ew32_prepare(hw);
- if (e1000e_update_tail_wa(hw, rx_ring->tail, i)) {
+ writel(i, rx_ring->tail);
+
+ if (unlikely(!ret_val && (i != readl(rx_ring->tail)))) {
u32 rctl = er32(RCTL);
ew32(RCTL, rctl & ~E1000_RCTL_EN);
e_err("ME firmware caused invalid RDT - resetting\n");
{
struct e1000_adapter *adapter = tx_ring->adapter;
struct e1000_hw *hw = &adapter->hw;
+ s32 ret_val = __ew32_prepare(hw);
+
+ writel(i, tx_ring->tail);
- if (e1000e_update_tail_wa(hw, tx_ring->tail, i)) {
+ if (unlikely(!ret_val && (i != readl(tx_ring->tail)))) {
u32 tctl = er32(TCTL);
ew32(TCTL, tctl & ~E1000_TCTL_EN);
e_err("ME firmware caused invalid TDT - resetting\n");
buffer_info->skb = skb;
map_skb:
- buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
- adapter->rx_buffer_len,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
- dev_err(&pdev->dev, "Rx DMA map failed\n");
+ buffer_info->dma =
+ dma_map_single(pci_dev_to_dev(pdev), skb->data,
+ adapter->rx_buffer_len, DMA_FROM_DEVICE);
+ if (dma_mapping_error(pci_dev_to_dev(pdev), buffer_info->dma)) {
+ dev_err(pci_dev_to_dev(pdev), "Rx DMA map failed\n");
adapter->rx_dma_failed++;
break;
}
continue;
}
if (!ps_page->page) {
- ps_page->page = alloc_page(gfp);
+ ps_page->page = alloc_pages_node(adapter->node,
+ gfp, 0);
if (!ps_page->page) {
adapter->alloc_rx_buff_failed++;
goto no_buffers;
}
- ps_page->dma = dma_map_page(&pdev->dev,
- ps_page->page,
- 0, PAGE_SIZE,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(&pdev->dev,
- ps_page->dma)) {
- dev_err(&adapter->pdev->dev,
+ }
+ if (!ps_page->dma) {
+ ps_page->dma =
+ dma_map_page(pci_dev_to_dev(pdev),
+ ps_page->page, 0, PAGE_SIZE,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error
+ (pci_dev_to_dev(pdev), ps_page->dma)) {
+ dev_err(pci_dev_to_dev(adapter->pdev),
"Rx DMA page map failed\n");
+ ps_page->dma = 0;
adapter->rx_dma_failed++;
goto no_buffers;
}
cpu_to_le64(ps_page->dma);
}
+ skb = buffer_info->skb;
+ if (skb) {
+ skb_trim(skb, 0);
+ goto map_skb;
+ }
+
skb = __netdev_alloc_skb_ip_align(netdev,
- adapter->rx_ps_bsize0,
- gfp);
+ adapter->rx_ps_bsize0, gfp);
if (!skb) {
adapter->alloc_rx_buff_failed++;
}
buffer_info->skb = skb;
- buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
- adapter->rx_ps_bsize0,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
- dev_err(&pdev->dev, "Rx DMA map failed\n");
+
+map_skb:
+ buffer_info->dma =
+ dma_map_single(pci_dev_to_dev(pdev), skb->data,
+ adapter->rx_ps_bsize0, DMA_FROM_DEVICE);
+ if (dma_mapping_error(pci_dev_to_dev(pdev), buffer_info->dma)) {
+ dev_err(pci_dev_to_dev(pdev), "Rx DMA map failed\n");
adapter->rx_dma_failed++;
/* cleanup skb */
dev_kfree_skb_any(skb);
rx_ring->next_to_use = i;
}
+#ifdef CONFIG_E1000E_NAPI
/**
* e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
* @rx_ring: Rx descriptor ring
struct e1000_buffer *buffer_info;
struct sk_buff *skb;
unsigned int i;
- unsigned int bufsz = 256 - 16 /* for skb_reserve */;
+ unsigned int bufsz = 256 - 16 /* for skb_reserve */ ;
i = rx_ring->next_to_use;
buffer_info = &rx_ring->buffer_info[i];
check_page:
/* allocate a new page if necessary */
if (!buffer_info->page) {
- buffer_info->page = alloc_page(gfp);
+ buffer_info->page = alloc_pages_node(adapter->node,
+ gfp, 0);
if (unlikely(!buffer_info->page)) {
adapter->alloc_rx_buff_failed++;
break;
}
if (!buffer_info->dma)
- buffer_info->dma = dma_map_page(&pdev->dev,
- buffer_info->page, 0,
- PAGE_SIZE,
+ buffer_info->dma = dma_map_page(pci_dev_to_dev(pdev),
+ buffer_info->page, 0,
+ PAGE_SIZE,
DMA_FROM_DEVICE);
rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
writel(i, rx_ring->tail);
}
}
+#endif /* CONFIG_E1000E_NAPI */
+#ifdef NETIF_F_RXHASH
static inline void e1000_rx_hash(struct net_device *netdev, __le32 rss,
struct sk_buff *skb)
{
skb->rxhash = le32_to_cpu(rss);
}
+#endif
/**
* e1000_clean_rx_irq - Send received data up the network stack
* @rx_ring: Rx descriptor ring
* the return value indicates whether actual cleaning was done, there
* is no guarantee that everything was cleaned
**/
+#ifdef CONFIG_E1000E_NAPI
static bool e1000_clean_rx_irq(struct e1000_ring *rx_ring, int *work_done,
int work_to_do)
+#else
+static bool e1000_clean_rx_irq(struct e1000_ring *rx_ring)
+#endif
{
struct e1000_adapter *adapter = rx_ring->adapter;
struct net_device *netdev = adapter->netdev;
while (staterr & E1000_RXD_STAT_DD) {
struct sk_buff *skb;
+#ifdef CONFIG_E1000E_NAPI
if (*work_done >= work_to_do)
break;
(*work_done)++;
- rmb(); /* read descriptor and rx_buffer_info after status DD */
+#endif
+ rmb(); /* read descriptor and rx_buffer_info after status DD */
skb = buffer_info->skb;
buffer_info->skb = NULL;
cleaned = true;
cleaned_count++;
- dma_unmap_single(&pdev->dev,
+ dma_unmap_single(pci_dev_to_dev(pdev),
buffer_info->dma,
- adapter->rx_buffer_len,
- DMA_FROM_DEVICE);
+ adapter->rx_buffer_len, DMA_FROM_DEVICE);
buffer_info->dma = 0;
length = le16_to_cpu(rx_desc->wb.upper.length);
goto next_desc;
}
- if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
+ if (unlikely((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) &&
+ !(netdev->features & NETIF_F_RXALL))) {
/* recycle */
buffer_info->skb = skb;
goto next_desc;
}
/* adjust length to remove Ethernet CRC */
- if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
- length -= 4;
+ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) {
+ /* If configured to store CRC, don't subtract FCS,
+ * but keep the FCS bytes out of the total_rx_bytes
+ * counter
+ */
+ if (netdev->features & NETIF_F_RXFCS)
+ total_rx_bytes -= 4;
+ else
+ length -= 4;
+ }
total_rx_bytes += length;
total_rx_packets++;
e1000_rx_checksum(adapter, staterr,
rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+#ifdef NETIF_F_RXHASH
e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
+#endif
e1000_receive_skb(adapter, netdev, skb, staterr,
rx_desc->wb.upper.vlan);
adapter->total_rx_bytes += total_rx_bytes;
adapter->total_rx_packets += total_rx_packets;
+#ifdef HAVE_NDO_GET_STATS64
+#elif defined(HAVE_NETDEV_STATS_IN_NETDEV)
+ netdev->stats.rx_bytes += total_rx_bytes;
+ netdev->stats.rx_packets += total_rx_packets;
+#else
+ adapter->net_stats.rx_bytes += total_rx_bytes;
+ adapter->net_stats.rx_packets += total_rx_packets;
+#endif
return cleaned;
}
if (buffer_info->dma) {
if (buffer_info->mapped_as_page)
- dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
- buffer_info->length, DMA_TO_DEVICE);
+ dma_unmap_page(pci_dev_to_dev(adapter->pdev),
+ buffer_info->dma, buffer_info->length,
+ DMA_TO_DEVICE);
else
- dma_unmap_single(&adapter->pdev->dev, buffer_info->dma,
- buffer_info->length, DMA_TO_DEVICE);
+ dma_unmap_single(pci_dev_to_dev(adapter->pdev),
+ buffer_info->dma, buffer_info->length,
+ DMA_TO_DEVICE);
buffer_info->dma = 0;
}
if (buffer_info->skb) {
static void e1000_print_hw_hang(struct work_struct *work)
{
struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter,
- print_hang_task);
+ struct e1000_adapter,
+ print_hang_task);
struct net_device *netdev = adapter->netdev;
struct e1000_ring *tx_ring = adapter->tx_ring;
unsigned int i = tx_ring->next_to_clean;
if (test_bit(__E1000_DOWN, &adapter->state))
return;
- if (!adapter->tx_hang_recheck &&
- (adapter->flags2 & FLAG2_DMA_BURST)) {
- /* May be block on write-back, flush and detect again
+ if (!adapter->tx_hang_recheck && (adapter->flags2 & FLAG2_DMA_BURST)) {
+ /*
+ * May be block on write-back, flush and detect again
* flush pending descriptor writebacks to memory
*/
ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
jiffies,
eop_desc->upper.fields.status,
er32(STATUS),
- phy_status,
- phy_1000t_status,
- phy_ext_status,
- pci_status);
+ phy_status, phy_1000t_status, phy_ext_status, pci_status);
+
+ /* Suggest workaround for known h/w issue */
+ if ((hw->mac.type == e1000_pchlan) && (er32(CTRL) & E1000_CTRL_TFCE))
+ e_err("Try turning off Tx pause (flow control) via ethtool\n");
}
/**
unsigned int i, eop;
unsigned int count = 0;
unsigned int total_tx_bytes = 0, total_tx_packets = 0;
+ unsigned int bytes_compl = 0, pkts_compl = 0;
i = tx_ring->next_to_clean;
eop = tx_ring->buffer_info[i].next_to_watch;
while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
(count < tx_ring->count)) {
bool cleaned = false;
- rmb(); /* read buffer_info after eop_desc */
+ rmb(); /* read buffer_info after eop_desc */
for (; !cleaned; count++) {
tx_desc = E1000_TX_DESC(*tx_ring, i);
buffer_info = &tx_ring->buffer_info[i];
if (cleaned) {
total_tx_packets += buffer_info->segs;
total_tx_bytes += buffer_info->bytecount;
+ if (buffer_info->skb) {
+ bytes_compl += buffer_info->skb->len;
+ pkts_compl++;
+ }
}
e1000_put_txbuf(tx_ring, buffer_info);
tx_ring->next_to_clean = i;
+#ifdef CONFIG_BQL
+ netdev_completed_queue(netdev, pkts_compl, bytes_compl);
+#endif
+
#define TX_WAKE_THRESHOLD 32
if (count && netif_carrier_ok(netdev) &&
e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) {
}
adapter->total_tx_bytes += total_tx_bytes;
adapter->total_tx_packets += total_tx_packets;
+#ifdef HAVE_NDO_GET_STATS64
+#elif defined(HAVE_NETDEV_STATS_IN_NETDEV)
+ netdev->stats.tx_bytes += total_tx_bytes;
+ netdev->stats.tx_packets += total_tx_packets;
+#else
+ adapter->net_stats.tx_bytes += total_tx_bytes;
+ adapter->net_stats.tx_packets += total_tx_packets;
+#endif
return count < tx_ring->count;
}
* the return value indicates whether actual cleaning was done, there
* is no guarantee that everything was cleaned
**/
+#ifdef CONFIG_E1000E_NAPI
static bool e1000_clean_rx_irq_ps(struct e1000_ring *rx_ring, int *work_done,
int work_to_do)
+#else
+static bool e1000_clean_rx_irq_ps(struct e1000_ring *rx_ring)
+#endif
{
struct e1000_adapter *adapter = rx_ring->adapter;
struct e1000_hw *hw = &adapter->hw;
buffer_info = &rx_ring->buffer_info[i];
while (staterr & E1000_RXD_STAT_DD) {
+#ifdef CONFIG_E1000E_NAPI
if (*work_done >= work_to_do)
break;
(*work_done)++;
+#endif
skb = buffer_info->skb;
- rmb(); /* read descriptor and rx_buffer_info after status DD */
+ rmb(); /* read descriptor and rx_buffer_info after status DD */
/* in the packet split case this is header only */
prefetch(skb->data - NET_IP_ALIGN);
cleaned = true;
cleaned_count++;
- dma_unmap_single(&pdev->dev, buffer_info->dma,
+ dma_unmap_single(pci_dev_to_dev(pdev), buffer_info->dma,
adapter->rx_ps_bsize0, DMA_FROM_DEVICE);
buffer_info->dma = 0;
goto next_desc;
}
- if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
+ if (unlikely((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) &&
+ !(netdev->features & NETIF_F_RXALL))) {
dev_kfree_skb_irq(skb);
goto next_desc;
}
/* Good Receive */
skb_put(skb, length);
+#ifdef CONFIG_E1000E_NAPI
{
/*
* this looks ugly, but it seems compiler issues make
* kmap_atomic, so we can't hold the mapping
* very long
*/
- dma_sync_single_for_cpu(&pdev->dev,
+ dma_sync_single_for_cpu(pci_dev_to_dev(pdev),
ps_page->dma,
PAGE_SIZE,
DMA_FROM_DEVICE);
- vaddr = kmap_atomic(ps_page->page,
- KM_SKB_DATA_SOFTIRQ);
+ vaddr = kmap_atomic(ps_page->page);
memcpy(skb_tail_pointer(skb), vaddr, l1);
- kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
- dma_sync_single_for_device(&pdev->dev,
+ kunmap_atomic(vaddr);
+ dma_sync_single_for_device(pci_dev_to_dev(pdev),
ps_page->dma,
PAGE_SIZE,
DMA_FROM_DEVICE);
/* remove the CRC */
- if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
- l1 -= 4;
+ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) {
+ if (!(netdev->features & NETIF_F_RXFCS))
+ l1 -= 4;
+ }
skb_put(skb, l1);
goto copydone;
- } /* if */
+ } /* if */
}
+#endif
for (j = 0; j < PS_PAGE_BUFFERS; j++) {
length = le16_to_cpu(rx_desc->wb.upper.length[j]);
break;
ps_page = &buffer_info->ps_pages[j];
- dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE,
- DMA_FROM_DEVICE);
+ dma_unmap_page(pci_dev_to_dev(pdev), ps_page->dma,
+ PAGE_SIZE, DMA_FROM_DEVICE);
ps_page->dma = 0;
skb_fill_page_desc(skb, j, ps_page->page, 0, length);
ps_page->page = NULL;
/* strip the ethernet crc, problem is we're using pages now so
* this whole operation can get a little cpu intensive
*/
- if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
- pskb_trim(skb, skb->len - 4);
-
+ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) {
+ if (!(netdev->features & NETIF_F_RXFCS))
+ pskb_trim(skb, skb->len - 4);
+ }
+#ifdef CONFIG_E1000E_NAPI
copydone:
+#endif
total_rx_bytes += skb->len;
total_rx_packets++;
e1000_rx_checksum(adapter, staterr,
rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+#ifdef NETIF_F_RXHASH
e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
+#endif
if (rx_desc->wb.upper.header_status &
- cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
+ cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
adapter->rx_hdr_split++;
e1000_receive_skb(adapter, netdev, skb,
adapter->total_rx_bytes += total_rx_bytes;
adapter->total_rx_packets += total_rx_packets;
+#ifdef HAVE_NDO_GET_STATS64
+#elif defined(HAVE_NETDEV_STATS_IN_NETDEV)
+ netdev->stats.rx_bytes += total_rx_bytes;
+ netdev->stats.rx_packets += total_rx_packets;
+#else
+ adapter->net_stats.rx_bytes += total_rx_bytes;
+ adapter->net_stats.rx_packets += total_rx_packets;
+#endif
return cleaned;
}
+#ifdef CONFIG_E1000E_NAPI
/**
* e1000_consume_page - helper function
**/
static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
- u16 length)
+ u16 length)
{
bi->page = NULL;
skb->len += length;
unsigned int i;
int cleaned_count = 0;
bool cleaned = false;
- unsigned int total_rx_bytes=0, total_rx_packets=0;
+ unsigned int total_rx_bytes = 0, total_rx_packets = 0;
i = rx_ring->next_to_clean;
rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
if (*work_done >= work_to_do)
break;
(*work_done)++;
- rmb(); /* read descriptor and rx_buffer_info after status DD */
+ rmb(); /* read descriptor and rx_buffer_info after status DD */
skb = buffer_info->skb;
buffer_info->skb = NULL;
cleaned = true;
cleaned_count++;
- dma_unmap_page(&pdev->dev, buffer_info->dma, PAGE_SIZE,
- DMA_FROM_DEVICE);
+ dma_unmap_page(pci_dev_to_dev(pdev), buffer_info->dma,
+ PAGE_SIZE, DMA_FROM_DEVICE);
buffer_info->dma = 0;
length = le16_to_cpu(rx_desc->wb.upper.length);
/* errors is only valid for DD + EOP descriptors */
if (unlikely((staterr & E1000_RXD_STAT_EOP) &&
- (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK))) {
+ ((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) &&
+ !(netdev->features & NETIF_F_RXALL)))) {
/* recycle both page and skb */
buffer_info->skb = skb;
/* an error means any chain goes out the window too */
rx_ring->rx_skb_top = NULL;
goto next_desc;
}
-
#define rxtop (rx_ring->rx_skb_top)
if (!(staterr & E1000_RXD_STAT_EOP)) {
/* this descriptor is only the beginning (or middle) */
/* this is the beginning of a chain */
rxtop = skb;
skb_fill_page_desc(rxtop, 0, buffer_info->page,
- 0, length);
+ 0, length);
} else {
/* this is the middle of a chain */
skb_fill_page_desc(rxtop,
- skb_shinfo(rxtop)->nr_frags,
- buffer_info->page, 0, length);
+ skb_shinfo(rxtop)->nr_frags,
+ buffer_info->page, 0,
+ length);
/* re-use the skb, only consumed the page */
buffer_info->skb = skb;
}
if (rxtop) {
/* end of the chain */
skb_fill_page_desc(rxtop,
- skb_shinfo(rxtop)->nr_frags,
- buffer_info->page, 0, length);
+ skb_shinfo(rxtop)->nr_frags,
+ buffer_info->page, 0,
+ length);
/* re-use the current skb, we only consumed the
* page */
buffer_info->skb = skb;
if (length <= copybreak &&
skb_tailroom(skb) >= length) {
u8 *vaddr;
- vaddr = kmap_atomic(buffer_info->page,
- KM_SKB_DATA_SOFTIRQ);
+ vaddr = kmap_atomic(buffer_info->page);
memcpy(skb_tail_pointer(skb), vaddr,
length);
- kunmap_atomic(vaddr,
- KM_SKB_DATA_SOFTIRQ);
+ kunmap_atomic(vaddr);
/* re-use the page, so don't erase
* buffer_info->page */
skb_put(skb, length);
} else {
skb_fill_page_desc(skb, 0,
- buffer_info->page, 0,
- length);
+ buffer_info->page, 0,
+ length);
e1000_consume_page(buffer_info, skb,
- length);
+ length);
}
}
}
e1000_rx_checksum(adapter, staterr,
rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+#ifdef NETIF_F_RXHASH
e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
+#endif
/* probably a little skewed due to removing CRC */
total_rx_bytes += skb->len;
total_rx_packets++;
adapter->total_rx_bytes += total_rx_bytes;
adapter->total_rx_packets += total_rx_packets;
+#ifdef HAVE_NDO_GET_STATS64
+#elif defined(HAVE_NETDEV_STATS_IN_NETDEV)
+ netdev->stats.rx_bytes += total_rx_bytes;
+ netdev->stats.rx_packets += total_rx_packets;
+#else
+ adapter->net_stats.rx_bytes += total_rx_bytes;
+ adapter->net_stats.rx_packets += total_rx_packets;
+#endif
return cleaned;
}
+#endif /* CONFIG_E1000E_NAPI */
/**
* e1000_clean_rx_ring - Free Rx Buffers per Queue
* @rx_ring: Rx descriptor ring
buffer_info = &rx_ring->buffer_info[i];
if (buffer_info->dma) {
if (adapter->clean_rx == e1000_clean_rx_irq)
- dma_unmap_single(&pdev->dev, buffer_info->dma,
+ dma_unmap_single(pci_dev_to_dev(pdev),
+ buffer_info->dma,
adapter->rx_buffer_len,
DMA_FROM_DEVICE);
+#ifdef CONFIG_E1000E_NAPI
else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq)
- dma_unmap_page(&pdev->dev, buffer_info->dma,
- PAGE_SIZE,
+ dma_unmap_page(pci_dev_to_dev(pdev),
+ buffer_info->dma, PAGE_SIZE,
DMA_FROM_DEVICE);
+#endif
else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
- dma_unmap_single(&pdev->dev, buffer_info->dma,
+ dma_unmap_single(pci_dev_to_dev(pdev),
+ buffer_info->dma,
adapter->rx_ps_bsize0,
DMA_FROM_DEVICE);
buffer_info->dma = 0;
ps_page = &buffer_info->ps_pages[j];
if (!ps_page->page)
break;
- dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE,
- DMA_FROM_DEVICE);
+ dma_unmap_page(pci_dev_to_dev(pdev), ps_page->dma,
+ PAGE_SIZE, DMA_FROM_DEVICE);
ps_page->dma = 0;
put_page(ps_page->page);
ps_page->page = NULL;
}
}
+#ifdef CONFIG_E1000E_NAPI
/* there also may be some cached data from a chained receive */
if (rx_ring->rx_skb_top) {
dev_kfree_skb(rx_ring->rx_skb_top);
rx_ring->rx_skb_top = NULL;
}
+#endif
/* Zero out the descriptor ring */
memset(rx_ring->desc, 0, rx_ring->size);
adapter->flags2 &= ~FLAG2_IS_DISCARDING;
writel(0, rx_ring->head);
- writel(0, rx_ring->tail);
+ if (rx_ring->adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+ e1000e_update_rdt_wa(rx_ring, 0);
+ else
+ writel(0, rx_ring->tail);
}
static void e1000e_downshift_workaround(struct work_struct *work)
{
struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter, downshift_task);
+ struct e1000_adapter,
+ downshift_task);
if (test_bit(__E1000_DOWN, &adapter->state))
return;
e1000e_gig_downshift_workaround_ich8lan(&adapter->hw);
}
+#ifndef CONFIG_E1000E_NAPI
+static void e1000_set_itr(struct e1000_adapter *adapter);
+#endif
/**
* e1000_intr_msi - Interrupt Handler
* @irq: interrupt number
struct net_device *netdev = data;
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+#ifndef CONFIG_E1000E_NAPI
+ int i;
+#endif
u32 icr = er32(ICR);
/*
if (!test_bit(__E1000_DOWN, &adapter->state))
mod_timer(&adapter->watchdog_timer, jiffies + 1);
}
-
+#ifdef CONFIG_E1000E_NAPI
if (napi_schedule_prep(&adapter->napi)) {
adapter->total_tx_bytes = 0;
adapter->total_tx_packets = 0;
adapter->total_rx_packets = 0;
__napi_schedule(&adapter->napi);
}
+#else
+ adapter->total_tx_bytes = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_packets = 0;
+
+ for (i = 0; i < E1000_MAX_INTR; i++) {
+ int rx_cleaned = adapter->clean_rx(adapter->rx_ring);
+ int tx_cleaned_complete = e1000_clean_tx_irq(adapter->tx_ring);
+ if (!rx_cleaned && tx_cleaned_complete)
+ break;
+ }
+
+ if (likely(adapter->itr_setting & 3))
+ e1000_set_itr(adapter);
+#endif /* CONFIG_E1000E_NAPI */
return IRQ_HANDLED;
}
struct net_device *netdev = data;
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+#ifndef CONFIG_E1000E_NAPI
+ int i;
+ int rx_cleaned, tx_cleaned_complete;
+#endif
u32 rctl, icr = er32(ICR);
if (!icr || test_bit(__E1000_DOWN, &adapter->state))
- return IRQ_NONE; /* Not our interrupt */
+ return IRQ_NONE; /* Not our interrupt */
+#ifdef CONFIG_E1000E_NAPI
/*
* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
* not set, then the adapter didn't send an interrupt
if (!(icr & E1000_ICR_INT_ASSERTED))
return IRQ_NONE;
+#endif /* CONFIG_E1000E_NAPI */
/*
* Interrupt Auto-Mask...upon reading ICR,
* interrupts are masked. No need for the
if (!test_bit(__E1000_DOWN, &adapter->state))
mod_timer(&adapter->watchdog_timer, jiffies + 1);
}
-
+#ifdef CONFIG_E1000E_NAPI
if (napi_schedule_prep(&adapter->napi)) {
adapter->total_tx_bytes = 0;
adapter->total_tx_packets = 0;
adapter->total_rx_packets = 0;
__napi_schedule(&adapter->napi);
}
+#else
+ adapter->total_tx_bytes = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_packets = 0;
+
+ for (i = 0; i < E1000_MAX_INTR; i++) {
+ rx_cleaned = adapter->clean_rx(adapter->rx_ring);
+ tx_cleaned_complete = e1000_clean_tx_irq(adapter->tx_ring);
+ if (!rx_cleaned && tx_cleaned_complete)
+ break;
+ }
+
+ if (likely(adapter->itr_setting & 3))
+ e1000_set_itr(adapter);
+#endif /* CONFIG_E1000E_NAPI */
return IRQ_HANDLED;
}
return IRQ_HANDLED;
}
-
static irqreturn_t e1000_intr_msix_tx(int irq, void *data)
{
struct net_device *netdev = data;
struct e1000_hw *hw = &adapter->hw;
struct e1000_ring *tx_ring = adapter->tx_ring;
-
adapter->total_tx_bytes = 0;
adapter->total_tx_packets = 0;
struct net_device *netdev = data;
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_ring *rx_ring = adapter->rx_ring;
+#ifndef CONFIG_E1000E_NAPI
+ int i;
+ struct e1000_hw *hw = &adapter->hw;
+#endif
/* Write the ITR value calculated at the end of the
* previous interrupt.
rx_ring->itr_register);
rx_ring->set_itr = 0;
}
-
+#ifdef CONFIG_E1000E_NAPI
if (napi_schedule_prep(&adapter->napi)) {
adapter->total_rx_bytes = 0;
adapter->total_rx_packets = 0;
__napi_schedule(&adapter->napi);
}
+#else
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+
+ for (i = 0; i < E1000_MAX_INTR; i++) {
+ int rx_cleaned = adapter->clean_rx(rx_ring);
+ if (!rx_cleaned)
+ goto out;
+ }
+ /* If we got here, the ring was not completely cleaned,
+ * so fire another interrupt.
+ */
+ ew32(ICS, rx_ring->ims_val);
+
+out:
+#endif /* CONFIG_E1000E_NAPI */
return IRQ_HANDLED;
}
rfctl |= E1000_RFCTL_ACK_DIS;
ew32(RFCTL, rfctl);
}
-
#define E1000_IVAR_INT_ALLOC_VALID 0x8
/* Configure Rx vector */
rx_ring->ims_val = E1000_IMS_RXQ0;
ctrl_ext |= E1000_CTRL_EXT_PBA_CLR;
/* Auto-Mask Other interrupts upon ICR read */
-#define E1000_EIAC_MASK_82574 0x01F00000
ew32(IAM, ~E1000_EIAC_MASK_82574 | E1000_IMS_OTHER);
ctrl_ext |= E1000_CTRL_EXT_EIAME;
ew32(CTRL_EXT, ctrl_ext);
switch (adapter->int_mode) {
case E1000E_INT_MODE_MSIX:
if (adapter->flags & FLAG_HAS_MSIX) {
- adapter->num_vectors = 3; /* RxQ0, TxQ0 and other */
- adapter->msix_entries = kcalloc(adapter->num_vectors,
- sizeof(struct msix_entry),
- GFP_KERNEL);
+ adapter->num_vectors = 3; /* RxQ0, TxQ0 and other */
+ adapter->msix_entries =
+ kzalloc_node(adapter->num_vectors *
+ sizeof(struct msix_entry), GFP_KERNEL,
+ adapter->node);
if (adapter->msix_entries) {
for (i = 0; i < adapter->num_vectors; i++)
adapter->msix_entries[i].entry = i;
struct e1000_ring *ring)
{
struct pci_dev *pdev = adapter->pdev;
+ int old_node = dev_to_node(pci_dev_to_dev(pdev));
+ int retval = 0;
- ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma,
- GFP_KERNEL);
+ /*
+ * must use set_dev_node here to work around the lack of a
+ * dma_alloc_coherent_node function call
+ */
+ if (adapter->node != -1)
+ set_dev_node(pci_dev_to_dev(pdev), adapter->node);
+ ring->desc =
+ dma_alloc_coherent(pci_dev_to_dev(pdev), ring->size, &ring->dma,
+ GFP_KERNEL);
if (!ring->desc)
- return -ENOMEM;
+ retval = -ENOMEM;
- return 0;
+ if (adapter->node != -1)
+ set_dev_node(pci_dev_to_dev(pdev), old_node);
+ return retval;
}
/**
int err = -ENOMEM, size;
size = sizeof(struct e1000_buffer) * tx_ring->count;
- tx_ring->buffer_info = vzalloc(size);
+ tx_ring->buffer_info = vzalloc_node(size, adapter->node);
if (!tx_ring->buffer_info)
goto err;
int i, size, desc_len, err = -ENOMEM;
size = sizeof(struct e1000_buffer) * rx_ring->count;
- rx_ring->buffer_info = vzalloc(size);
+ rx_ring->buffer_info = vzalloc_node(size, adapter->node);
if (!rx_ring->buffer_info)
goto err;
for (i = 0; i < rx_ring->count; i++) {
buffer_info = &rx_ring->buffer_info[i];
- buffer_info->ps_pages = kcalloc(PS_PAGE_BUFFERS,
- sizeof(struct e1000_ps_page),
- GFP_KERNEL);
+ buffer_info->ps_pages = kzalloc_node(PS_PAGE_BUFFERS *
+ sizeof(struct
+ e1000_ps_page),
+ GFP_KERNEL, adapter->node);
if (!buffer_info->ps_pages)
goto err_pages;
}
**/
static void e1000_clean_tx_ring(struct e1000_ring *tx_ring)
{
+#ifdef CONFIG_BQL
struct e1000_adapter *adapter = tx_ring->adapter;
+#endif
struct e1000_buffer *buffer_info;
unsigned long size;
unsigned int i;
e1000_put_txbuf(tx_ring, buffer_info);
}
+#ifdef CONFIG_BQL
+ netdev_reset_queue(adapter->netdev);
+#endif
size = sizeof(struct e1000_buffer) * tx_ring->count;
memset(tx_ring->buffer_info, 0, size);
tx_ring->next_to_clean = 0;
writel(0, tx_ring->head);
- writel(0, tx_ring->tail);
+ if (tx_ring->adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+ e1000e_update_tdt_wa(tx_ring, 0);
+ else
+ writel(0, tx_ring->tail);
}
/**
vfree(tx_ring->buffer_info);
tx_ring->buffer_info = NULL;
- dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
+ dma_free_coherent(pci_dev_to_dev(pdev), tx_ring->size, tx_ring->desc,
tx_ring->dma);
tx_ring->desc = NULL;
}
vfree(rx_ring->buffer_info);
rx_ring->buffer_info = NULL;
- dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
+ dma_free_coherent(pci_dev_to_dev(pdev), rx_ring->size, rx_ring->desc,
rx_ring->dma);
rx_ring->desc = NULL;
}
* by the InterruptThrottleRate module parameter.
**/
static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
- u16 itr_setting, int packets,
- int bytes)
+ u16 itr_setting, int packets, int bytes)
{
unsigned int retval = itr_setting;
switch (itr_setting) {
case lowest_latency:
/* handle TSO and jumbo frames */
- if (bytes/packets > 8000)
+ if (bytes / packets > 8000)
retval = bulk_latency;
else if ((packets < 5) && (bytes > 512))
retval = low_latency;
break;
- case low_latency: /* 50 usec aka 20000 ints/s */
+ case low_latency: /* 50 usec aka 20000 ints/s */
if (bytes > 10000) {
/* this if handles the TSO accounting */
- if (bytes/packets > 8000)
+ if (bytes / packets > 8000)
retval = bulk_latency;
- else if ((packets < 10) || ((bytes/packets) > 1200))
+ else if ((packets < 10) || ((bytes / packets) > 1200))
retval = bulk_latency;
else if ((packets > 35))
retval = lowest_latency;
- } else if (bytes/packets > 2000) {
+ } else if (bytes / packets > 2000) {
retval = bulk_latency;
} else if (packets <= 2 && bytes < 512) {
retval = lowest_latency;
}
break;
- case bulk_latency: /* 250 usec aka 4000 ints/s */
+ case bulk_latency: /* 250 usec aka 4000 ints/s */
if (bytes > 25000) {
if (packets > 35)
retval = low_latency;
}
adapter->tx_itr = e1000_update_itr(adapter,
- adapter->tx_itr,
- adapter->total_tx_packets,
- adapter->total_tx_bytes);
+ adapter->tx_itr,
+ adapter->total_tx_packets,
+ adapter->total_tx_bytes);
/* conservative mode (itr 3) eliminates the lowest_latency setting */
if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
adapter->tx_itr = low_latency;
adapter->rx_itr = e1000_update_itr(adapter,
- adapter->rx_itr,
- adapter->total_rx_packets,
- adapter->total_rx_bytes);
+ adapter->rx_itr,
+ adapter->total_rx_packets,
+ adapter->total_rx_bytes);
/* conservative mode (itr 3) eliminates the lowest_latency setting */
if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
adapter->rx_itr = low_latency;
current_itr = max(adapter->rx_itr, adapter->tx_itr);
switch (current_itr) {
- /* counts and packets in update_itr are dependent on these numbers */
+ /* counts and packets in update_itr are dependent on these numbers */
case lowest_latency:
new_itr = 70000;
break;
case low_latency:
- new_itr = 20000; /* aka hwitr = ~200 */
+ new_itr = 20000; /* aka hwitr = ~200 */
break;
case bulk_latency:
new_itr = 4000;
* increasing
*/
new_itr = new_itr > adapter->itr ?
- min(adapter->itr + (new_itr >> 2), new_itr) :
- new_itr;
+ min(adapter->itr + (new_itr >> 2), new_itr) : new_itr;
adapter->itr = new_itr;
adapter->rx_ring->itr_val = new_itr;
if (adapter->msix_entries)
adapter->rx_ring->set_itr = 1;
+ else if (new_itr)
+ ew32(ITR, 1000000000 / (new_itr * 256));
else
- if (new_itr)
- ew32(ITR, 1000000000 / (new_itr * 256));
- else
- ew32(ITR, 0);
+ ew32(ITR, 0);
}
}
{
int size = sizeof(struct e1000_ring);
- adapter->tx_ring = kzalloc(size, GFP_KERNEL);
+ adapter->tx_ring = kzalloc_node(size, GFP_KERNEL, adapter->node);
if (!adapter->tx_ring)
goto err;
adapter->tx_ring->count = adapter->tx_ring_count;
adapter->tx_ring->adapter = adapter;
- adapter->rx_ring = kzalloc(size, GFP_KERNEL);
+ adapter->rx_ring = kzalloc_node(size, GFP_KERNEL, adapter->node);
if (!adapter->rx_ring)
goto err;
adapter->rx_ring->count = adapter->rx_ring_count;
return -ENOMEM;
}
+#ifdef CONFIG_E1000E_NAPI
/**
- * e1000_clean - NAPI Rx polling callback
+ * e1000e_poll - NAPI Rx polling callback
* @napi: struct associated with this polling callback
- * @budget: amount of packets driver is allowed to process this poll
+ * @weight: number of packets driver is allowed to process this poll
**/
-static int e1000_clean(struct napi_struct *napi, int budget)
+static int e1000e_poll(struct napi_struct *napi, int weight)
{
- struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
+ struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter,
+ napi);
struct e1000_hw *hw = &adapter->hw;
struct net_device *poll_dev = adapter->netdev;
int tx_cleaned = 1, work_done = 0;
adapter = netdev_priv(poll_dev);
- if (adapter->msix_entries &&
- !(adapter->rx_ring->ims_val & adapter->tx_ring->ims_val))
- goto clean_rx;
+ if (!adapter->msix_entries ||
+ (adapter->rx_ring->ims_val & adapter->tx_ring->ims_val))
+ tx_cleaned = e1000_clean_tx_irq(adapter->tx_ring);
- tx_cleaned = e1000_clean_tx_irq(adapter->tx_ring);
-
-clean_rx:
- adapter->clean_rx(adapter->rx_ring, &work_done, budget);
+ adapter->clean_rx(adapter->rx_ring, &work_done, weight);
if (!tx_cleaned)
- work_done = budget;
+ work_done = weight;
+
+#ifndef HAVE_NETDEV_NAPI_LIST
+ /* if netdev is disabled we need to stop polling */
+ if (!netif_running(adapter->netdev))
+ work_done = 0;
- /* If budget not fully consumed, exit the polling mode */
- if (work_done < budget) {
+#endif
+ /* If weight not fully consumed, exit the polling mode */
+ if (work_done < weight) {
if (adapter->itr_setting & 3)
e1000_set_itr(adapter);
napi_complete(napi);
return work_done;
}
+#endif /* CONFIG_E1000E_NAPI */
+#ifdef NETIF_F_HW_VLAN_TX
+#ifdef HAVE_INT_NDO_VLAN_RX_ADD_VID
+static int e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+#else
static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+#endif
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
if ((adapter->hw.mng_cookie.status &
E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
(vid == adapter->mng_vlan_id))
+#ifdef HAVE_INT_NDO_VLAN_RX_ADD_VID
+ return 0;
+#else
return;
+#endif
/* add VID to filter table */
if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
vfta |= (1 << (vid & 0x1F));
hw->mac.ops.write_vfta(hw, index, vfta);
}
+#ifndef HAVE_NETDEV_VLAN_FEATURES
+
+ /*
+ * Copy feature flags from netdev to the vlan netdev for this vid.
+ * This allows things like TSO to bubble down to our vlan device.
+ */
+ if (adapter->vlgrp) {
+ struct vlan_group *vlgrp = adapter->vlgrp;
+ struct net_device *v_netdev = vlan_group_get_device(vlgrp, vid);
+ if (v_netdev) {
+ v_netdev->features |= netdev->features;
+ vlan_group_set_device(vlgrp, vid, v_netdev);
+ }
+ }
+#endif /* HAVE_NETDEV_VLAN_FEATURES */
+#ifndef HAVE_VLAN_RX_REGISTER
set_bit(vid, adapter->active_vlans);
+#endif /* !HAVE_NETDEV_VLAN_RX_REGISTER */
+#ifdef HAVE_INT_NDO_VLAN_RX_ADD_VID
+
+ return 0;
+#endif
}
+#ifdef HAVE_INT_NDO_VLAN_RX_ADD_VID
+static int e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+#else
static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+#endif
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
u32 vfta, index;
+#ifdef HAVE_VLAN_RX_REGISTER
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ e1000_irq_disable(adapter);
+
+ vlan_group_set_device(adapter->vlgrp, vid, NULL);
+
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ e1000_irq_enable(adapter);
+
+#endif /* HAVE_VLAN_RX_REGISTER */
if ((adapter->hw.mng_cookie.status &
E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
(vid == adapter->mng_vlan_id)) {
/* release control to f/w */
e1000e_release_hw_control(adapter);
+#ifdef HAVE_INT_NDO_VLAN_RX_ADD_VID
+ return 0;
+#else
return;
+#endif
}
/* remove VID from filter table */
vfta &= ~(1 << (vid & 0x1F));
hw->mac.ops.write_vfta(hw, index, vfta);
}
+#ifndef HAVE_VLAN_RX_REGISTER
clear_bit(vid, adapter->active_vlans);
+#endif /* !HAVE_VLAN_RX_REGISTER */
+#ifdef HAVE_INT_NDO_VLAN_RX_ADD_VID
+
+ return 0;
+#endif
}
+#ifndef HAVE_VLAN_RX_REGISTER
/**
* e1000e_vlan_filter_disable - helper to disable hw VLAN filtering
* @adapter: board private structure to initialize
ctrl |= E1000_CTRL_VME;
ew32(CTRL, ctrl);
}
+#endif /* !HAVE_VLAN_RX_REGISTER */
static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
{
u16 vid = adapter->hw.mng_cookie.vlan_id;
u16 old_vid = adapter->mng_vlan_id;
- if (adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
+#ifdef HAVE_VLAN_RX_REGISTER
+ if (!adapter->vlgrp)
+ return;
+
+ if (!vlan_group_get_device(adapter->vlgrp, vid)) {
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ if (adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
+ e1000_vlan_rx_add_vid(netdev, vid);
+ adapter->mng_vlan_id = vid;
+ }
+
+ if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
+ (vid != old_vid) &&
+ !vlan_group_get_device(adapter->vlgrp, old_vid))
+ e1000_vlan_rx_kill_vid(netdev, old_vid);
+ } else {
+ adapter->mng_vlan_id = vid;
+ }
+#else /* HAVE_VLAN_RX_REGISTER */
+ if (adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
e1000_vlan_rx_add_vid(netdev, vid);
adapter->mng_vlan_id = vid;
}
if ((old_vid != (u16)E1000_MNG_VLAN_NONE) && (vid != old_vid))
e1000_vlan_rx_kill_vid(netdev, old_vid);
+#endif /* HAVE_VLAN_RX_REGISTER */
+}
+
+#ifdef HAVE_VLAN_RX_REGISTER
+static void e1000_vlan_rx_register(struct net_device *netdev,
+ struct vlan_group *grp)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, rctl;
+
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ e1000_irq_disable(adapter);
+ adapter->vlgrp = grp;
+
+ if (grp) {
+ /* enable VLAN tag insert/strip */
+ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_VME;
+ ew32(CTRL, ctrl);
+
+ if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
+ /* enable VLAN receive filtering */
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_CFIEN;
+ ew32(RCTL, rctl);
+ e1000_update_mng_vlan(adapter);
+ }
+ } else {
+ /* disable VLAN tag insert/strip */
+ ctrl = er32(CTRL);
+ ctrl &= ~E1000_CTRL_VME;
+ ew32(CTRL, ctrl);
+
+ if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
+ if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) {
+ e1000_vlan_rx_kill_vid(netdev,
+ adapter->mng_vlan_id);
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ }
+ }
+ }
+
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ e1000_irq_enable(adapter);
}
+#endif /* HAVE_VLAN_RX_REGISTER */
static void e1000_restore_vlan(struct e1000_adapter *adapter)
{
u16 vid;
+#ifdef HAVE_VLAN_RX_REGISTER
+ e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
+
+ if (!adapter->vlgrp)
+ return;
+
+ for (vid = 0; vid < VLAN_N_VID; vid++) {
+ if (!vlan_group_get_device(adapter->vlgrp, vid))
+ continue;
+ e1000_vlan_rx_add_vid(adapter->netdev, vid);
+ }
+#else /* HAVE_VLAN_RX_REGISTER */
e1000_vlan_rx_add_vid(adapter->netdev, 0);
for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
- e1000_vlan_rx_add_vid(adapter->netdev, vid);
+ e1000_vlan_rx_add_vid(adapter->netdev, vid);
+#endif /* HAVE_VLAN_RX_REGISTER */
}
+#endif /* NETIF_F_HW_VLAN_TX */
static void e1000_init_manageability_pt(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
/* Setup the HW Tx Head and Tail descriptor pointers */
tdba = tx_ring->dma;
tdlen = tx_ring->count * sizeof(struct e1000_tx_desc);
- ew32(TDBAL, (tdba & DMA_BIT_MASK(32)));
- ew32(TDBAH, (tdba >> 32));
- ew32(TDLEN, tdlen);
- ew32(TDH, 0);
- ew32(TDT, 0);
- tx_ring->head = adapter->hw.hw_addr + E1000_TDH;
- tx_ring->tail = adapter->hw.hw_addr + E1000_TDT;
+ ew32(TDBAL(0), (tdba & DMA_BIT_MASK(32)));
+ ew32(TDBAH(0), (tdba >> 32));
+ ew32(TDLEN(0), tdlen);
+ ew32(TDH(0), 0);
+ ew32(TDT(0), 0);
+ tx_ring->head = adapter->hw.hw_addr + E1000_TDH(0);
+ tx_ring->tail = adapter->hw.hw_addr + E1000_TDT(0);
/* Set the Tx Interrupt Delay register */
ew32(TIDV, adapter->tx_int_delay);
/* enable Report Status bit */
adapter->txd_cmd |= E1000_TXD_CMD_RS;
- e1000e_config_collision_dist(hw);
+ hw->mac.ops.config_collision_dist(hw);
}
/**
u32 rctl, rfctl;
u32 pages = 0;
- /* Workaround Si errata on 82579 - configure jumbo frame flow */
- if (hw->mac.type == e1000_pch2lan) {
+ /* Workaround Si errata on PCHx - configure jumbo frame flow */
+ if (hw->mac.type >= e1000_pch2lan) {
s32 ret_val;
if (adapter->netdev->mtu > ETH_DATA_LEN)
rctl = er32(RCTL);
rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
- E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
- (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+ (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
/* Do not Store bad packets */
rctl &= ~E1000_RCTL_SBP;
if (adapter->flags2 & FLAG2_CRC_STRIPPING)
rctl |= E1000_RCTL_SECRC;
- /* Workaround Si errata on 82577 PHY - configure IPG for jumbos */
- if ((hw->phy.type == e1000_phy_82577) && (rctl & E1000_RCTL_LPE)) {
+ /* Workaround Si errata on 82577/82578 - configure IPG for jumbos */
+ if ((hw->mac.type == e1000_pchlan) && (rctl & E1000_RCTL_LPE)) {
+ u32 mac_data;
u16 phy_data;
e1e_rphy(hw, PHY_REG(770, 26), &phy_data);
phy_data |= (1 << 2);
e1e_wphy(hw, PHY_REG(770, 26), phy_data);
- e1e_rphy(hw, 22, &phy_data);
- phy_data &= 0x0fff;
- phy_data |= (1 << 14);
- e1e_wphy(hw, 0x10, 0x2823);
- e1e_wphy(hw, 0x11, 0x0003);
- e1e_wphy(hw, 22, phy_data);
+ mac_data = er32(FFLT_DBG);
+ mac_data |= (1 << 17);
+ ew32(FFLT_DBG, mac_data);
+
+ if (hw->phy.type == e1000_phy_82577) {
+ e1e_rphy(hw, 22, &phy_data);
+ phy_data &= 0x0fff;
+ phy_data |= (1 << 14);
+ e1e_wphy(hw, 0x10, 0x2823);
+ e1e_wphy(hw, 0x11, 0x0003);
+ e1e_wphy(hw, 22, phy_data);
+ }
}
/* Setup buffer sizes */
/* Enable Extended Status in all Receive Descriptors */
rfctl = er32(RFCTL);
rfctl |= E1000_RFCTL_EXTEN;
+ ew32(RFCTL, rfctl);
/*
* 82571 and greater support packet-split where the protocol
if (adapter->rx_ps_pages) {
u32 psrctl = 0;
- /*
- * disable packet split support for IPv6 extension headers,
- * because some malformed IPv6 headers can hang the Rx
- */
- rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
- E1000_RFCTL_NEW_IPV6_EXT_DIS);
-
/* Enable Packet split descriptors */
rctl |= E1000_RCTL_DTYP_PS;
- psrctl |= adapter->rx_ps_bsize0 >>
- E1000_PSRCTL_BSIZE0_SHIFT;
+ psrctl |= adapter->rx_ps_bsize0 >> E1000_PSRCTL_BSIZE0_SHIFT;
switch (adapter->rx_ps_pages) {
case 3:
- psrctl |= PAGE_SIZE <<
- E1000_PSRCTL_BSIZE3_SHIFT;
+ psrctl |= PAGE_SIZE << E1000_PSRCTL_BSIZE3_SHIFT;
case 2:
- psrctl |= PAGE_SIZE <<
- E1000_PSRCTL_BSIZE2_SHIFT;
+ psrctl |= PAGE_SIZE << E1000_PSRCTL_BSIZE2_SHIFT;
case 1:
- psrctl |= PAGE_SIZE >>
- E1000_PSRCTL_BSIZE1_SHIFT;
+ psrctl |= PAGE_SIZE >> E1000_PSRCTL_BSIZE1_SHIFT;
break;
}
ew32(PSRCTL, psrctl);
}
- ew32(RFCTL, rfctl);
+ /* This is useful for sniffing bad packets. */
+ if (adapter->netdev->features & NETIF_F_RXALL) {
+ /* UPE and MPE will be handled by normal PROMISC logic
+ * in e1000e_set_rx_mode */
+ rctl |= (E1000_RCTL_SBP | /* Receive bad packets */
+ E1000_RCTL_BAM | /* RX All Bcast Pkts */
+ E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */
+
+ rctl &= ~(E1000_RCTL_VFE | /* Disable VLAN filter */
+ E1000_RCTL_DPF | /* Allow filtered pause */
+ E1000_RCTL_CFIEN); /* Dis VLAN CFIEN Filter */
+ /* Do not mess with E1000_CTRL_VME, it affects transmit as well,
+ * and that breaks VLANs.
+ */
+ }
+
ew32(RCTL, rctl);
/* just started the receive unit, no need to restart */
adapter->flags &= ~FLAG_RX_RESTART_NOW;
sizeof(union e1000_rx_desc_packet_split);
adapter->clean_rx = e1000_clean_rx_irq_ps;
adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
+#ifdef CONFIG_E1000E_NAPI
} else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) {
rdlen = rx_ring->count * sizeof(union e1000_rx_desc_extended);
adapter->clean_rx = e1000_clean_jumbo_rx_irq;
adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
+#endif
} else {
rdlen = rx_ring->count * sizeof(union e1000_rx_desc_extended);
adapter->clean_rx = e1000_clean_rx_irq;
ew32(ITR, 1000000000 / (adapter->itr * 256));
ctrl_ext = er32(CTRL_EXT);
+#ifdef CONFIG_E1000E_NAPI
/* Auto-Mask interrupts upon ICR access */
ctrl_ext |= E1000_CTRL_EXT_IAME;
ew32(IAM, 0xffffffff);
+#endif
ew32(CTRL_EXT, ctrl_ext);
e1e_flush();
* the Base and Length of the Rx Descriptor Ring
*/
rdba = rx_ring->dma;
- ew32(RDBAL, (rdba & DMA_BIT_MASK(32)));
- ew32(RDBAH, (rdba >> 32));
- ew32(RDLEN, rdlen);
- ew32(RDH, 0);
- ew32(RDT, 0);
- rx_ring->head = adapter->hw.hw_addr + E1000_RDH;
- rx_ring->tail = adapter->hw.hw_addr + E1000_RDT;
+ ew32(RDBAL(0), (rdba & DMA_BIT_MASK(32)));
+ ew32(RDBAH(0), (rdba >> 32));
+ ew32(RDLEN(0), rdlen);
+ ew32(RDH(0), 0);
+ ew32(RDT(0), 0);
+ rx_ring->head = adapter->hw.hw_addr + E1000_RDH(0);
+ rx_ring->tail = adapter->hw.hw_addr + E1000_RDT(0);
/* Enable Receive Checksum Offload for TCP and UDP */
rxcsum = er32(RXCSUM);
+#ifdef HAVE_NDO_SET_FEATURES
if (adapter->netdev->features & NETIF_F_RXCSUM) {
+#else
+ if (adapter->flags & FLAG_RX_CSUM_ENABLED) {
+#endif
rxcsum |= E1000_RXCSUM_TUOFL;
/*
if (adapter->netdev->mtu > ETH_DATA_LEN) {
u32 rxdctl = er32(RXDCTL(0));
ew32(RXDCTL(0), rxdctl | 0x3);
+#ifdef HAVE_PM_QOS_REQUEST_ACTIVE
pm_qos_update_request(&adapter->netdev->pm_qos_req, 55);
+#elif defined(HAVE_PM_QOS_REQUEST_LIST)
+ pm_qos_update_request(adapter->netdev->pm_qos_req, 55);
+#else
+ pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
+ adapter->netdev->name, 55);
+#endif
} else {
+#ifdef HAVE_PM_QOS_REQUEST_ACTIVE
pm_qos_update_request(&adapter->netdev->pm_qos_req,
PM_QOS_DEFAULT_VALUE);
+#elif defined(HAVE_PM_QOS_REQUEST_LIST)
+ pm_qos_update_request(adapter->netdev->pm_qos_req,
+ PM_QOS_DEFAULT_VALUE);
+#else
+ pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
+ adapter->netdev->name,
+ PM_QOS_DEFAULT_VALUE);
+#endif
}
}
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+#ifdef NETDEV_HW_ADDR_T_MULTICAST
struct netdev_hw_addr *ha;
+#else
+ struct dev_mc_list *ha;
+#endif
u8 *mta_list;
int i;
/* update_mc_addr_list expects a packed array of only addresses. */
i = 0;
netdev_for_each_mc_addr(ha, netdev)
- memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
+#ifdef NETDEV_HW_ADDR_T_MULTICAST
+ memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
+#else
+ memcpy(mta_list + (i++ * ETH_ALEN), ha->dmi_addr, ETH_ALEN);
+#endif
hw->mac.ops.update_mc_addr_list(hw, mta_list, i);
kfree(mta_list);
return netdev_mc_count(netdev);
}
+#ifdef HAVE_SET_RX_MODE
/**
* e1000e_write_uc_addr_list - write unicast addresses to RAR table
* @netdev: network interface device structure
return -ENOMEM;
if (!netdev_uc_empty(netdev) && rar_entries) {
+#ifdef NETDEV_HW_ADDR_T_UNICAST
struct netdev_hw_addr *ha;
+#else
+ struct dev_mc_list *ha;
+#endif
/*
* write the addresses in reverse order to avoid write
netdev_for_each_uc_addr(ha, netdev) {
if (!rar_entries)
break;
+#ifdef NETDEV_HW_ADDR_T_UNICAST
e1000e_rar_set(hw, ha->addr, rar_entries--);
+#else
+ e1000e_rar_set(hw, ha->da_addr, rar_entries--);
+#endif
count++;
}
}
return count;
}
+#endif /* HAVE_SET_RX_MODE */
/**
* e1000e_set_rx_mode - secondary unicast, Multicast and Promiscuous mode set
* @netdev: network interface device structure
if (netdev->flags & IFF_PROMISC) {
rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
+#ifdef HAVE_VLAN_RX_REGISTER
+ rctl &= ~E1000_RCTL_VFE;
+#else
/* Do not hardware filter VLANs in promisc mode */
e1000e_vlan_filter_disable(adapter);
+#endif /* HAVE_VLAN_RX_REGISTER */
} else {
int count;
+
if (netdev->flags & IFF_ALLMULTI) {
rctl |= E1000_RCTL_MPE;
} else {
if (count < 0)
rctl |= E1000_RCTL_MPE;
}
+#ifdef HAVE_VLAN_RX_REGISTER
+ if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
+ rctl |= E1000_RCTL_VFE;
+#else
e1000e_vlan_filter_enable(adapter);
+#endif
+#ifdef HAVE_SET_RX_MODE
/*
* Write addresses to available RAR registers, if there is not
* sufficient space to store all the addresses then enable
count = e1000e_write_uc_addr_list(netdev);
if (count < 0)
rctl |= E1000_RCTL_UPE;
+#endif /* HAVE_SET_RX_MODE */
}
ew32(RCTL, rctl);
+#ifndef HAVE_VLAN_RX_REGISTER
if (netdev->features & NETIF_F_HW_VLAN_RX)
e1000e_vlan_strip_enable(adapter);
else
e1000e_vlan_strip_disable(adapter);
+#endif /* HAVE_VLAN_RX_REGISTER */
}
+#ifdef NETIF_F_RXHASH
static void e1000e_setup_rss_hash(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
ew32(MRQC, mrqc);
}
+#endif /* NETIF_F_RXHASH */
/**
* e1000_configure - configure the hardware for Rx and Tx
* @adapter: private board structure
e1000e_set_rx_mode(adapter->netdev);
+#ifdef NETIF_F_HW_VLAN_TX
e1000_restore_vlan(adapter);
+#endif
e1000_init_manageability_pt(adapter);
e1000_configure_tx(adapter);
+#ifdef NETIF_F_RXHASH
if (adapter->netdev->features & NETIF_F_RXHASH)
e1000e_setup_rss_hash(adapter);
+#endif
e1000_setup_rctl(adapter);
e1000_configure_rx(adapter);
adapter->alloc_rx_buf(rx_ring, e1000_desc_unused(rx_ring), GFP_KERNEL);
* but don't include ethernet FCS because hardware appends it
*/
min_tx_space = (adapter->max_frame_size +
- sizeof(struct e1000_tx_desc) -
- ETH_FCS_LEN) * 2;
+ sizeof(struct e1000_tx_desc) - ETH_FCS_LEN) * 2;
min_tx_space = ALIGN(min_tx_space, 1024);
min_tx_space >>= 10;
/* software strips receive CRC, so leave room for it */
fc->pause_time = 0xFFFF;
else
fc->pause_time = E1000_FC_PAUSE_TIME;
- fc->send_xon = 1;
+ fc->send_xon = true;
fc->current_mode = fc->requested_mode;
switch (hw->mac.type) {
hwm = min(((pba << 10) * 9 / 10),
((pba << 10) - adapter->max_frame_size));
- fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
+ fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
fc->low_water = fc->high_water - 8;
break;
case e1000_pchlan:
*/
if (adapter->netdev->mtu > ETH_DATA_LEN) {
fc->high_water = 0x3500;
- fc->low_water = 0x1500;
+ fc->low_water = 0x1500;
} else {
fc->high_water = 0x5000;
- fc->low_water = 0x3000;
+ fc->low_water = 0x3000;
}
fc->refresh_time = 0x1000;
break;
case e1000_pch2lan:
+ case e1000_pch_lpt:
fc->high_water = 0x05C20;
fc->low_water = 0x05048;
fc->pause_time = 0x0650;
if (adapter->itr_setting & 0x3) {
if ((adapter->max_frame_size * 2) > (pba << 10)) {
if (!(adapter->flags2 & FLAG2_DISABLE_AIM)) {
- dev_info(&adapter->pdev->dev,
- "Interrupt Throttle Rate turned off\n");
+ dev_info(pci_dev_to_dev(adapter->pdev),
+ "Interrupt Throttle Rate turned off\n");
adapter->flags2 |= FLAG2_DISABLE_AIM;
ew32(ITR, 0);
}
} else if (adapter->flags2 & FLAG2_DISABLE_AIM) {
- dev_info(&adapter->pdev->dev,
+ dev_info(pci_dev_to_dev(adapter->pdev),
"Interrupt Throttle Rate turned on\n");
adapter->flags2 &= ~FLAG2_DISABLE_AIM;
adapter->itr = 20000;
if (mac->ops.init_hw(hw))
e_err("Hardware Error\n");
+#ifdef NETIF_F_HW_VLAN_TX
e1000_update_mng_vlan(adapter);
/* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
ew32(VET, ETH_P_8021Q);
+#endif
e1000e_reset_adaptive(hw);
if (!netif_running(adapter->netdev) &&
e1e_flush();
}
+#ifdef HAVE_NDO_GET_STATS64
static void e1000e_update_stats(struct e1000_adapter *adapter);
+#endif
void e1000e_down(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
netif_carrier_off(netdev);
+#ifdef HAVE_NDO_GET_STATS64
spin_lock(&adapter->stats64_lock);
e1000e_update_stats(adapter);
spin_unlock(&adapter->stats64_lock);
+#endif
e1000e_flush_descriptors(adapter);
e1000_clean_tx_ring(adapter->tx_ring);
e1000_clean_rx_ring(adapter->rx_ring);
adapter->link_speed = 0;
adapter->link_duplex = 0;
+#ifdef HAVE_PCI_ERS
if (!pci_channel_offline(adapter->pdev))
+#endif
e1000e_reset(adapter);
/*
static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
+ s32 rc;
adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN;
adapter->rx_ps_bsize0 = 128;
adapter->tx_ring_count = E1000_DEFAULT_TXD;
adapter->rx_ring_count = E1000_DEFAULT_RXD;
+ /* Set various function pointers */
+ adapter->ei->init_ops(&adapter->hw);
+
+ rc = adapter->hw.mac.ops.init_params(&adapter->hw);
+ if (rc)
+ return rc;
+
+ rc = adapter->hw.nvm.ops.init_params(&adapter->hw);
+ if (rc)
+ return rc;
+
+ rc = adapter->hw.phy.ops.init_params(&adapter->hw);
+ if (rc)
+ return rc;
+
+#ifdef HAVE_NDO_GET_STATS64
spin_lock_init(&adapter->stats64_lock);
+#endif /* HAVE_NDO_GET_STATS64 */
e1000e_set_interrupt_capability(adapter);
if (e1000_alloc_queues(adapter))
/* fire an unusual interrupt on the test handler */
ew32(ICS, E1000_ICS_RXSEQ);
e1e_flush();
- msleep(100);
+ msleep(50);
e1000_irq_disable(adapter);
struct pci_dev *pdev = adapter->pdev;
int err;
+ adapter->pdev = pdev;
/* disallow open during test */
if (test_bit(__E1000_TESTING, &adapter->state))
return -EBUSY;
e1000e_power_up_phy(adapter);
+#ifdef NETIF_F_HW_VLAN_TX
adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
- if ((adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
+ if ((adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
e1000_update_mng_vlan(adapter);
+#endif
/* DMA latency requirement to workaround jumbo issue */
if (adapter->hw.mac.type == e1000_pch2lan)
+#ifdef HAVE_PM_QOS_REQUEST_ACTIVE
pm_qos_add_request(&adapter->netdev->pm_qos_req,
PM_QOS_CPU_DMA_LATENCY,
PM_QOS_DEFAULT_VALUE);
+#elif defined(HAVE_PM_QOS_REQUEST_LIST)
+ adapter->netdev->pm_qos_req =
+ pm_qos_add_request(PM_QOS_CPU_DMA_LATENCY,
+ PM_QOS_DEFAULT_VALUE);
+#else
+ pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY,
+ adapter->netdev->name,
+ PM_QOS_DEFAULT_VALUE);
+#endif
/*
* before we allocate an interrupt, we must be ready to handle it.
/* From here on the code is the same as e1000e_up() */
clear_bit(__E1000_DOWN, &adapter->state);
+#ifdef CONFIG_E1000E_NAPI
napi_enable(&adapter->napi);
+#endif
e1000_irq_enable(adapter);
struct pci_dev *pdev = adapter->pdev;
int count = E1000_CHECK_RESET_COUNT;
+ adapter->pdev = pdev;
+
while (test_bit(__E1000_RESETTING, &adapter->state) && count--)
usleep_range(10000, 20000);
pm_runtime_get_sync(&pdev->dev);
+#ifdef CONFIG_E1000E_NAPI
napi_disable(&adapter->napi);
+#endif
if (!test_bit(__E1000_DOWN, &adapter->state)) {
e1000e_down(adapter);
e1000_free_irq(adapter);
e1000e_free_tx_resources(adapter->tx_ring);
e1000e_free_rx_resources(adapter->rx_ring);
+#ifdef NETIF_F_HW_VLAN_TX
/*
* kill manageability vlan ID if supported, but not if a vlan with
* the same ID is registered on the host OS (let 8021q kill it)
*/
- if (adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN)
+#ifdef HAVE_VLAN_RX_REGISTER
+ if ((adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
+ !(adapter->vlgrp &&
+ vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id)))
+#else /* HAVE_VLAN_RX_REGISTER */
+ if (adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN)
+#endif /* HAVE_VLAN_RX_REGISTER */
e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+#endif /* NETIF_F_HW_VLAN_TX */
/*
* If AMT is enabled, let the firmware know that the network
* interface is now closed
e1000e_release_hw_control(adapter);
if (adapter->hw.mac.type == e1000_pch2lan)
+#ifdef HAVE_PM_QOS_REQUEST_ACTIVE
pm_qos_remove_request(&adapter->netdev->pm_qos_req);
+#elif defined(HAVE_PM_QOS_REQUEST_LIST)
+ {
+ pm_qos_remove_request(adapter->netdev->pm_qos_req);
+ adapter->netdev->pm_qos_req = NULL;
+ }
+#else
+ pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY,
+ adapter->netdev->name);
+#endif
pm_runtime_put_sync(&pdev->dev);
return 0;
}
+
/**
* e1000_set_mac - Change the Ethernet Address of the NIC
* @netdev: network interface device structure
struct e1000_adapter *adapter = netdev_priv(netdev);
struct sockaddr *addr = p;
- if (!is_valid_ether_addr(addr->sa_data))
+ if (!is_valid_ether_addr((unsigned char *)(addr->sa_data)))
return -EADDRNOTAVAIL;
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
* RAR[14]
*/
e1000e_rar_set(&adapter->hw,
- adapter->hw.mac.addr,
- adapter->hw.mac.rar_entry_count - 1);
+ adapter->hw.mac.addr,
+ adapter->hw.mac.rar_entry_count - 1);
}
return 0;
static void e1000e_update_phy_task(struct work_struct *work)
{
struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter, update_phy_task);
+ struct e1000_adapter,
+ update_phy_task);
if (test_bit(__E1000_DOWN, &adapter->state))
return;
*/
static void e1000_update_phy_info(unsigned long data)
{
- struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+ struct e1000_adapter *adapter = (struct e1000_adapter *)data;
if (test_bit(__E1000_DOWN, &adapter->state))
return;
* e1000e_update_stats - Update the board statistics counters
* @adapter: board private structure
**/
+#ifdef HAVE_NDO_GET_STATS64
static void e1000e_update_stats(struct e1000_adapter *adapter)
+#else
+void e1000e_update_stats(struct e1000_adapter *adapter)
+#endif
{
+#ifdef HAVE_NETDEV_STATS_IN_NETDEV
struct net_device *netdev = adapter->netdev;
+#endif
struct e1000_hw *hw = &adapter->hw;
+#ifdef HAVE_PCI_ERS
struct pci_dev *pdev = adapter->pdev;
+#endif
/*
* Prevent stats update while adapter is being reset, or if the pci
*/
if (adapter->link_speed == 0)
return;
+#ifdef HAVE_PCI_ERS
if (pci_channel_offline(pdev))
return;
+#endif
adapter->stats.crcerrs += er32(CRCERRS);
adapter->stats.gprc += er32(GPRC);
adapter->stats.gorc += er32(GORCL);
- er32(GORCH); /* Clear gorc */
+ er32(GORCH); /* Clear gorc */
adapter->stats.bprc += er32(BPRC);
adapter->stats.mprc += er32(MPRC);
adapter->stats.roc += er32(ROC);
adapter->stats.xofftxc += er32(XOFFTXC);
adapter->stats.gptc += er32(GPTC);
adapter->stats.gotc += er32(GOTCL);
- er32(GOTCH); /* Clear gotc */
+ er32(GOTCH); /* Clear gotc */
adapter->stats.rnbc += er32(RNBC);
adapter->stats.ruc += er32(RUC);
adapter->stats.tsctfc += er32(TSCTFC);
/* Fill out the OS statistics structure */
+#ifdef HAVE_NETDEV_STATS_IN_NETDEV
netdev->stats.multicast = adapter->stats.mprc;
netdev->stats.collisions = adapter->stats.colc;
+#else
+ adapter->net_stats.multicast = adapter->stats.mprc;
+ adapter->net_stats.collisions = adapter->stats.colc;
+#endif
/* Rx Errors */
* RLEC on some newer hardware can be incorrect so build
* our own version based on RUC and ROC
*/
+#ifdef HAVE_NETDEV_STATS_IN_NETDEV
netdev->stats.rx_errors = adapter->stats.rxerrc +
- adapter->stats.crcerrs + adapter->stats.algnerrc +
- adapter->stats.ruc + adapter->stats.roc +
- adapter->stats.cexterr;
+#else
+ adapter->net_stats.rx_errors = adapter->stats.rxerrc +
+#endif
+ adapter->stats.crcerrs + adapter->stats.algnerrc +
+ adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr;
+#ifdef HAVE_NETDEV_STATS_IN_NETDEV
netdev->stats.rx_length_errors = adapter->stats.ruc +
- adapter->stats.roc;
+ adapter->stats.roc;
netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
netdev->stats.rx_missed_errors = adapter->stats.mpc;
+#else
+ adapter->net_stats.rx_length_errors = adapter->stats.ruc +
+ adapter->stats.roc;
+ adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
+ adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
+ adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
+#endif
/* Tx Errors */
- netdev->stats.tx_errors = adapter->stats.ecol +
- adapter->stats.latecol;
+#ifdef HAVE_NETDEV_STATS_IN_NETDEV
+ netdev->stats.tx_errors = adapter->stats.ecol + adapter->stats.latecol;
netdev->stats.tx_aborted_errors = adapter->stats.ecol;
netdev->stats.tx_window_errors = adapter->stats.latecol;
netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
+#else
+ adapter->net_stats.tx_errors = adapter->stats.ecol +
+ adapter->stats.latecol;
+ adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
+ adapter->net_stats.tx_window_errors = adapter->stats.latecol;
+ adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
+#endif
/* Tx Dropped needs to be maintained elsewhere */
adapter->stats.mgpdc += er32(MGTPDC);
}
+#ifdef SIOCGMIIPHY
/**
* e1000_phy_read_status - Update the PHY register status snapshot
* @adapter: board private structure
(adapter->hw.phy.media_type == e1000_media_type_copper)) {
int ret_val;
- ret_val = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr);
+ ret_val = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr);
ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr);
ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise);
ret_val |= e1e_rphy(hw, PHY_LP_ABILITY, &phy->lpa);
}
}
+#endif /* SIOCGMIIPHY */
static void e1000_print_link_info(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
u32 ctrl = er32(CTRL);
/* Link status message must follow this format for user tools */
- printk(KERN_INFO "e1000e: %s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n",
- adapter->netdev->name,
- adapter->link_speed,
- adapter->link_duplex == FULL_DUPLEX ? "Full" : "Half",
- (ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE) ? "Rx/Tx" :
- (ctrl & E1000_CTRL_RFCE) ? "Rx" :
- (ctrl & E1000_CTRL_TFCE) ? "Tx" : "None");
+ printk(KERN_INFO
+ "e1000e: %s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n",
+ adapter->netdev->name, adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ? "Full" : "Half",
+ (ctrl & E1000_CTRL_TFCE)
+ && (ctrl & E1000_CTRL_RFCE) ? "Rx/Tx" : (ctrl & E1000_CTRL_RFCE)
+ ? "Rx" : (ctrl & E1000_CTRL_TFCE) ? "Tx" : "None");
}
static bool e1000e_has_link(struct e1000_adapter *adapter)
**/
static void e1000_watchdog(unsigned long data)
{
- struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+ struct e1000_adapter *adapter = (struct e1000_adapter *)data;
/* Do the rest outside of interrupt context */
schedule_work(&adapter->watchdog_task);
static void e1000_watchdog_task(struct work_struct *work)
{
struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter, watchdog_task);
+ struct e1000_adapter,
+ watchdog_task);
struct net_device *netdev = adapter->netdev;
struct e1000_mac_info *mac = &adapter->hw.mac;
struct e1000_phy_info *phy = &adapter->hw.phy;
e1000e_enable_receives(adapter);
goto link_up;
}
-
+#ifdef NETIF_F_HW_VLAN_TX
if ((e1000e_enable_tx_pkt_filtering(hw)) &&
(adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id))
e1000_update_mng_vlan(adapter);
+#endif
if (link) {
if (!netif_carrier_ok(netdev)) {
bool txb2b = true;
/* Cancel scheduled suspend requests. */
pm_runtime_resume(netdev->dev.parent);
+#ifdef SIOCGMIIPHY
/* update snapshot of PHY registers on LSC */
e1000_phy_read_status(adapter);
+#endif
mac->ops.get_link_up_info(&adapter->hw,
- &adapter->link_speed,
- &adapter->link_duplex);
+ &adapter->link_speed,
+ &adapter->link_duplex);
e1000_print_link_info(adapter);
/*
* On supported PHYs, check for duplex mismatch only
tarc0 &= ~SPEED_MODE_BIT;
ew32(TARC(0), tarc0);
}
-
+#ifdef NETIF_F_TSO
/*
* disable TSO for pcie and 10/100 speeds, to avoid
* some hardware issues
case SPEED_100:
e_info("10/100 speed: disabling TSO\n");
netdev->features &= ~NETIF_F_TSO;
+#ifdef NETIF_F_TSO6
netdev->features &= ~NETIF_F_TSO6;
+#endif
break;
case SPEED_1000:
netdev->features |= NETIF_F_TSO;
+#ifdef NETIF_F_TSO6
netdev->features |= NETIF_F_TSO6;
+#endif
break;
default:
/* oops */
break;
}
}
+#endif
/*
* enable transmits in the hardware, need to do this
tctl |= E1000_TCTL_EN;
ew32(TCTL, tctl);
- /*
+ /*
* Perform any post-link-up configuration before
* reporting link up.
*/
schedule_work(&adapter->reset_task);
else
pm_schedule_suspend(netdev->dev.parent,
- LINK_TIMEOUT);
+ LINK_TIMEOUT);
}
}
link_up:
+#ifdef HAVE_NDO_GET_STATS64
spin_lock(&adapter->stats64_lock);
+#endif
e1000e_update_stats(adapter);
mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
adapter->gorc_old = adapter->stats.gorc;
adapter->gotc = adapter->stats.gotc - adapter->gotc_old;
adapter->gotc_old = adapter->stats.gotc;
+#ifdef HAVE_NDO_GET_STATS64
spin_unlock(&adapter->stats64_lock);
+#endif
e1000e_update_adaptive(&adapter->hw);
*/
u32 goc = (adapter->gotc + adapter->gorc) / 10000;
u32 dif = (adapter->gotc > adapter->gorc ?
- adapter->gotc - adapter->gorc :
- adapter->gorc - adapter->gotc) / 10000;
+ adapter->gotc - adapter->gorc :
+ adapter->gorc - adapter->gotc) / 10000;
u32 itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
ew32(ITR, 1000000000 / (itr * 256));
#define E1000_TX_FLAGS_VLAN 0x00000002
#define E1000_TX_FLAGS_TSO 0x00000004
#define E1000_TX_FLAGS_IPV4 0x00000008
+#define E1000_TX_FLAGS_NO_FCS 0x00000010
#define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
#define E1000_TX_FLAGS_VLAN_SHIFT 16
static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb)
{
+#ifdef NETIF_F_TSO
struct e1000_context_desc *context_desc;
struct e1000_buffer *buffer_info;
unsigned int i;
iph->tot_len = 0;
iph->check = 0;
tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
- 0, IPPROTO_TCP, 0);
+ 0, IPPROTO_TCP, 0);
cmd_length = E1000_TXD_CMD_IP;
ipcse = skb_transport_offset(skb) - 1;
+#ifdef NETIF_F_TSO6
} else if (skb_is_gso_v6(skb)) {
ipv6_hdr(skb)->payload_len = 0;
tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
- &ipv6_hdr(skb)->daddr,
- 0, IPPROTO_TCP, 0);
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
ipcse = 0;
+#endif /* NETIF_F_TSO6 */
}
ipcss = skb_network_offset(skb);
ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
tucse = 0;
cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
- E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
+ E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
i = tx_ring->next_to_use;
context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
buffer_info = &tx_ring->buffer_info[i];
- context_desc->lower_setup.ip_fields.ipcss = ipcss;
- context_desc->lower_setup.ip_fields.ipcso = ipcso;
- context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse);
+ context_desc->lower_setup.ip_fields.ipcss = ipcss;
+ context_desc->lower_setup.ip_fields.ipcso = ipcso;
+ context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse);
context_desc->upper_setup.tcp_fields.tucss = tucss;
context_desc->upper_setup.tcp_fields.tucso = tucso;
context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
- context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss);
+ context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss);
context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
context_desc->cmd_and_length = cpu_to_le32(cmd_length);
tx_ring->next_to_use = i;
return 1;
+#else /* NETIF_F_TSO */
+ return 0;
+#endif /* NETIF_F_TSO */
}
static bool e1000_tx_csum(struct e1000_ring *tx_ring, struct sk_buff *skb)
if (skb->ip_summed != CHECKSUM_PARTIAL)
return 0;
+#ifdef NETIF_F_HW_VLAN_TX
if (skb->protocol == cpu_to_be16(ETH_P_8021Q))
protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto;
else
protocol = skb->protocol;
+#else
+ protocol = skb->protocol;
+#endif
switch (protocol) {
case cpu_to_be16(ETH_P_IP):
context_desc->lower_setup.ip_config = 0;
context_desc->upper_setup.tcp_fields.tucss = css;
- context_desc->upper_setup.tcp_fields.tucso =
- css + skb->csum_offset;
+ context_desc->upper_setup.tcp_fields.tucso = css + skb->csum_offset;
context_desc->upper_setup.tcp_fields.tucse = 0;
context_desc->tcp_seg_setup.data = 0;
context_desc->cmd_and_length = cpu_to_le32(cmd_len);
buffer_info->length = size;
buffer_info->time_stamp = jiffies;
buffer_info->next_to_watch = i;
- buffer_info->dma = dma_map_single(&pdev->dev,
+ buffer_info->dma = dma_map_single(pci_dev_to_dev(pdev),
skb->data + offset,
size, DMA_TO_DEVICE);
buffer_info->mapped_as_page = false;
- if (dma_mapping_error(&pdev->dev, buffer_info->dma))
+ if (dma_mapping_error(pci_dev_to_dev(pdev), buffer_info->dma))
goto dma_error;
len -= size;
}
for (f = 0; f < nr_frags; f++) {
- struct skb_frag_struct *frag;
+ const struct skb_frag_struct *frag;
frag = &skb_shinfo(skb)->frags[f];
- len = frag->size;
+ len = skb_frag_size(frag);
offset = 0;
while (len) {
buffer_info->length = size;
buffer_info->time_stamp = jiffies;
buffer_info->next_to_watch = i;
- buffer_info->dma = skb_frag_dma_map(&pdev->dev, frag,
- offset, size, DMA_TO_DEVICE);
+ buffer_info->dma =
+ skb_frag_dma_map(pci_dev_to_dev(pdev), frag, offset,
+ size, DMA_TO_DEVICE);
buffer_info->mapped_as_page = true;
- if (dma_mapping_error(&pdev->dev, buffer_info->dma))
+ if (dma_mapping_error
+ (pci_dev_to_dev(pdev), buffer_info->dma))
goto dma_error;
len -= size;
}
}
+#ifdef NETIF_F_TSO
segs = skb_shinfo(skb)->gso_segs ? : 1;
+#else
+ segs = 1;
+#endif
/* multiply data chunks by size of headers */
bytecount = ((segs - 1) * skb_headlen(skb)) + skb->len;
return count;
dma_error:
- dev_err(&pdev->dev, "Tx DMA map failed\n");
+ dev_err(pci_dev_to_dev(pdev), "Tx DMA map failed\n");
buffer_info->dma = 0;
if (count)
count--;
if (tx_flags & E1000_TX_FLAGS_TSO) {
txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
- E1000_TXD_CMD_TSE;
+ E1000_TXD_CMD_TSE;
txd_upper |= E1000_TXD_POPTS_TXSM << 8;
if (tx_flags & E1000_TX_FLAGS_IPV4)
txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
}
+ if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS))
+ txd_lower &= ~(E1000_TXD_CMD_IFCS);
+
i = tx_ring->next_to_use;
do {
tx_desc = E1000_TX_DESC(*tx_ring, i);
tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
tx_desc->lower.data =
- cpu_to_le32(txd_lower | buffer_info->length);
+ cpu_to_le32(txd_lower | buffer_info->length);
tx_desc->upper.data = cpu_to_le32(txd_upper);
i++;
tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
+ /* txd_cmd re-enables FCS, so we'll re-disable it here as desired. */
+ if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS))
+ tx_desc->lower.data &= ~(cpu_to_le32(E1000_TXD_CMD_IFCS));
+
/*
* Force memory writes to complete before letting h/w
* know there are new descriptors to fetch. (Only
static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
struct sk_buff *skb)
{
- struct e1000_hw *hw = &adapter->hw;
+ struct e1000_hw *hw = &adapter->hw;
u16 length, offset;
+#ifdef NETIF_F_HW_VLAN_TX
if (vlan_tx_tag_present(skb)) {
- if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
- (adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
+ if (!
+ ((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id)
+ && (adapter->hw.mng_cookie.
+ status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
return 0;
}
-
+#endif
if (skb->len <= MINIMUM_DHCP_PACKET_SIZE)
return 0;
- if (((struct ethhdr *) skb->data)->h_proto != htons(ETH_P_IP))
+ if (((struct ethhdr *)skb->data)->h_proto != htons(ETH_P_IP))
return 0;
{
- const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data+14);
+ const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data + 14);
struct udphdr *udp;
if (ip->protocol != IPPROTO_UDP)
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
-
+#ifdef NETIF_F_TSO
mss = skb_shinfo(skb)->gso_size;
/*
* The controller does a simple calculation to
if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
count++;
count++;
+#else
+ mss = 0;
+
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ count++;
+#endif
count += TXD_USE_COUNT(len, max_txd_pwr);
nr_frags = skb_shinfo(skb)->nr_frags;
for (f = 0; f < nr_frags; f++)
- count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
- max_txd_pwr);
+ count +=
+ TXD_USE_COUNT(skb_frag_size(&skb_shinfo(skb)->frags[f]),
+ max_txd_pwr);
if (adapter->hw.mac.tx_pkt_filtering)
e1000_transfer_dhcp_info(adapter, skb);
if (e1000_maybe_stop_tx(tx_ring, count + 2))
return NETDEV_TX_BUSY;
+#ifdef NETIF_F_HW_VLAN_TX
if (vlan_tx_tag_present(skb)) {
tx_flags |= E1000_TX_FLAGS_VLAN;
tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
}
-
+#endif
first = tx_ring->next_to_use;
tso = e1000_tso(tx_ring, skb);
if (skb->protocol == htons(ETH_P_IP))
tx_flags |= E1000_TX_FLAGS_IPV4;
+#ifdef IFF_SUPP_NOFCS
+ if (unlikely(skb->no_fcs))
+ tx_flags |= E1000_TX_FLAGS_NO_FCS;
+#endif /* IFF_SUPP_NOFCS */
+
/* if count is 0 then mapping error has occurred */
count = e1000_tx_map(tx_ring, skb, first, max_per_txd, nr_frags, mss);
if (count) {
+#ifdef CONFIG_BQL
+ netdev_sent_queue(netdev, skb->len);
+#endif
e1000_tx_queue(tx_ring, tx_flags, count);
/* Make sure there is space in the ring for the next send. */
e1000_maybe_stop_tx(tx_ring, MAX_SKB_FRAGS + 2);
-
} else {
dev_kfree_skb_any(skb);
tx_ring->buffer_info[first].time_stamp = 0;
tx_ring->next_to_use = first;
}
+ netdev->trans_start = jiffies;
return NETDEV_TX_OK;
}
e1000e_reinit_locked(adapter);
}
+#ifdef HAVE_NDO_GET_STATS64
/**
* e1000_get_stats64 - Get System Network Statistics
* @netdev: network interface device structure
* Returns the address of the device statistics structure.
**/
struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev,
- struct rtnl_link_stats64 *stats)
+ struct rtnl_link_stats64 *stats)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
* our own version based on RUC and ROC
*/
stats->rx_errors = adapter->stats.rxerrc +
- adapter->stats.crcerrs + adapter->stats.algnerrc +
- adapter->stats.ruc + adapter->stats.roc +
- adapter->stats.cexterr;
- stats->rx_length_errors = adapter->stats.ruc +
- adapter->stats.roc;
+ adapter->stats.crcerrs + adapter->stats.algnerrc +
+ adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr;
+ stats->rx_length_errors = adapter->stats.ruc + adapter->stats.roc;
stats->rx_crc_errors = adapter->stats.crcerrs;
stats->rx_frame_errors = adapter->stats.algnerrc;
stats->rx_missed_errors = adapter->stats.mpc;
/* Tx Errors */
- stats->tx_errors = adapter->stats.ecol +
- adapter->stats.latecol;
+ stats->tx_errors = adapter->stats.ecol + adapter->stats.latecol;
stats->tx_aborted_errors = adapter->stats.ecol;
stats->tx_window_errors = adapter->stats.latecol;
stats->tx_carrier_errors = adapter->stats.tncrs;
spin_unlock(&adapter->stats64_lock);
return stats;
}
+#else /* HAVE_NDO_GET_STATS64 */
+/**
+ * e1000_get_stats - Get System Network Statistics
+ * @netdev: network interface device structure
+ *
+ * Returns the address of the device statistics structure.
+ * The statistics are actually updated from the timer callback.
+ **/
+static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
+{
+#ifndef HAVE_NETDEV_STATS_IN_NETDEV
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ /* only return the current stats */
+ return &adapter->net_stats;
+#else /* HAVE_NETDEV_STATS_IN_NETDEV */
+ /* only return the current stats */
+ return &netdev->stats;
+#endif /* HAVE_NETDEV_STATS_IN_NETDEV */
+}
+#endif /* HAVE_NDO_GET_STATS64 */
/**
* e1000_change_mtu - Change the Maximum Transfer Unit
e_err("Jumbo Frames not supported.\n");
return -EINVAL;
}
-
+#ifdef HAVE_NDO_SET_FEATURES
/*
* IP payload checksum (enabled with jumbos/packet-split when
* Rx checksum is enabled) and generation of RSS hash is
*/
if ((netdev->features & NETIF_F_RXCSUM) &&
(netdev->features & NETIF_F_RXHASH)) {
- /* Disable receive hashing */
- netdev_features_t features;
-
- features = netdev->features & (~NETIF_F_RXHASH);
- if (e1000_set_features(netdev, features)) {
- e_err("Jumbo frames cannot be enabled when both receive checksum offload and receive hashing are enabled. Disable one of the receive offload features before enabling jumbos.\n");
- return -EINVAL;
- }
- e_info("Jumbo frames cannot be enabled when both receive checksum offload and receive hashing are enabled. Disabling Receive Hashing.\n");
+ e_err("Jumbo frames cannot be enabled when both receive checksum offload and receive hashing are enabled. Disable one of the receive offload features before enabling jumbos.\n");
+ return -EINVAL;
}
+#endif /* HAVE_NDO_SET_FEATURES */
}
/* Supported frame sizes */
return -EINVAL;
}
- /* Jumbo frame workaround on 82579 requires CRC be stripped */
- if ((adapter->hw.mac.type == e1000_pch2lan) &&
+ /* Jumbo frame workaround on 82579 and newer requires CRC be stripped */
+ if ((adapter->hw.mac.type >= e1000_pch2lan) &&
!(adapter->flags2 & FLAG2_CRC_STRIPPING) &&
(new_mtu > ETH_DATA_LEN)) {
- e_err("Jumbo Frames not supported on 82579 when CRC stripping is disabled.\n");
+ e_err("Jumbo Frames not supported on this device when CRC stripping is disabled.\n");
return -EINVAL;
}
if (max_frame <= 2048)
adapter->rx_buffer_len = 2048;
+#ifdef CONFIG_E1000E_NAPI
else
adapter->rx_buffer_len = 4096;
+#else
+ else if (max_frame <= 4096)
+ adapter->rx_buffer_len = 4096;
+ else if (max_frame <= 8192)
+ adapter->rx_buffer_len = 8192;
+ else if (max_frame <= 16384)
+ adapter->rx_buffer_len = 16384;
+#endif
/* adjust allocation if LPE protects us, and we aren't using SBP */
if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
- (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
+ (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
- + ETH_FCS_LEN;
+ + ETH_FCS_LEN;
if (netif_running(netdev))
e1000e_up(adapter);
return 0;
}
+#if defined(SIOCGMIIPHY) || defined(SIOCGMIIREG) || defined(SIOCSMIIREG)
static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
int cmd)
{
return -EOPNOTSUPP;
switch (cmd) {
+#ifdef SIOCGMIIPHY
case SIOCGMIIPHY:
data->phy_id = adapter->hw.phy.addr;
break;
+#endif
+#ifdef SIOCGMIIREG
case SIOCGMIIREG:
e1000_phy_read_status(adapter);
return -EIO;
}
break;
+#endif
+#ifdef SIOCGMIIREG
case SIOCSMIIREG:
+#endif
default:
return -EOPNOTSUPP;
}
return 0;
}
+#endif /* defined(SIOCGMIIPHY||SIOCGMIIREG||SIOCSMIIREG) */
static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
{
switch (cmd) {
+#ifdef SIOCGMIIPHY
case SIOCGMIIPHY:
+#endif
+#ifdef SIOCGMIIREG
case SIOCGMIIREG:
+#endif
+#ifdef SIOCSMIIREG
case SIOCSMIIREG:
+#endif
+#if defined(SIOCGMIIPHY) || defined(SIOCGMIIREG) || defined(SIOCSMIIREG)
return e1000_mii_ioctl(netdev, ifr, cmd);
+#endif
+#ifdef ETHTOOL_OPS_COMPAT
+ case SIOCETHTOOL:
+ return ethtool_ioctl(ifr);
+#endif
default:
return -EOPNOTSUPP;
}
phy_reg &= ~(BM_RCTL_MO_MASK);
if (mac_reg & E1000_RCTL_MO_3)
phy_reg |= (((mac_reg & E1000_RCTL_MO_3) >> E1000_RCTL_MO_SHIFT)
- << BM_RCTL_MO_SHIFT);
+ << BM_RCTL_MO_SHIFT);
if (mac_reg & E1000_RCTL_BAM)
phy_reg |= BM_RCTL_BAM;
if (mac_reg & E1000_RCTL_PMCF)
ctrl = er32(CTRL);
/* advertise wake from D3Cold */
- #define E1000_CTRL_ADVD3WUC 0x00100000
+#define E1000_CTRL_ADVD3WUC 0x00100000
/* phy power management enable */
- #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
+#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
ctrl |= E1000_CTRL_ADVD3WUC;
if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP))
ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT;
pci_set_power_state(pdev, PCI_D3hot);
}
-static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
- bool wake)
+static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep, bool wake)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
pci_read_config_word(us_dev, pos + PCI_EXP_DEVCTL, &devctl);
pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL,
- (devctl & ~PCI_EXP_DEVCTL_CERE));
+ (devctl & ~PCI_EXP_DEVCTL_CERE));
e1000_power_off(pdev, sleep, wake);
#endif
static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
{
- dev_info(&pdev->dev, "Disabling ASPM %s %s\n",
+ dev_info(pci_dev_to_dev(pdev), "Disabling ASPM %s %s\n",
(state & PCIE_LINK_STATE_L0S) ? "L0s" : "",
(state & PCIE_LINK_STATE_L1) ? "L1" : "");
pci_restore_state(pdev);
pci_save_state(pdev);
+#ifndef HAVE_SYSTEM_SLEEP_PM_OPS
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ dev_err(pci_dev_to_dev(pdev),
+ "Cannot enable PCI device from suspend\n");
+ return err;
+ }
+
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */
e1000e_set_interrupt_capability(adapter);
if (netif_running(netdev)) {
err = e1000_request_irq(adapter);
return err;
}
- if (hw->mac.type == e1000_pch2lan)
+ if (hw->mac.type >= e1000_pch2lan)
e1000_resume_workarounds_pchlan(&adapter->hw);
e1000e_power_up_phy(adapter);
e1e_rphy(&adapter->hw, BM_WUS, &phy_data);
if (phy_data) {
e_info("PHY Wakeup cause - %s\n",
- phy_data & E1000_WUS_EX ? "Unicast Packet" :
- phy_data & E1000_WUS_MC ? "Multicast Packet" :
- phy_data & E1000_WUS_BC ? "Broadcast Packet" :
- phy_data & E1000_WUS_MAG ? "Magic Packet" :
- phy_data & E1000_WUS_LNKC ?
- "Link Status Change" : "other");
+ phy_data & E1000_WUS_EX ? "Unicast Packet" :
+ phy_data & E1000_WUS_MC ? "Multicast Packet" :
+ phy_data & E1000_WUS_BC ? "Broadcast Packet" :
+ phy_data & E1000_WUS_MAG ? "Magic Packet" :
+ phy_data & E1000_WUS_LNKC ?
+ "Link Status Change" : "other");
}
e1e_wphy(&adapter->hw, BM_WUS, ~0);
} else {
u32 wus = er32(WUS);
if (wus) {
e_info("MAC Wakeup cause - %s\n",
- wus & E1000_WUS_EX ? "Unicast Packet" :
- wus & E1000_WUS_MC ? "Multicast Packet" :
- wus & E1000_WUS_BC ? "Broadcast Packet" :
- wus & E1000_WUS_MAG ? "Magic Packet" :
- wus & E1000_WUS_LNKC ? "Link Status Change" :
- "other");
+ wus & E1000_WUS_EX ? "Unicast Packet" :
+ wus & E1000_WUS_MC ? "Multicast Packet" :
+ wus & E1000_WUS_BC ? "Broadcast Packet" :
+ wus & E1000_WUS_MAG ? "Magic Packet" :
+ wus & E1000_WUS_LNKC ? "Link Status Change" :
+ "other");
}
ew32(WUS, ~0);
}
}
#ifdef CONFIG_PM_SLEEP
+#ifdef HAVE_SYSTEM_SLEEP_PM_OPS
static int e1000_suspend(struct device *dev)
+#else
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+#endif
{
+#ifdef HAVE_SYSTEM_SLEEP_PM_OPS
struct pci_dev *pdev = to_pci_dev(dev);
+#endif
int retval;
bool wake;
return retval;
}
+#ifdef HAVE_SYSTEM_SLEEP_PM_OPS
static int e1000_resume(struct device *dev)
+#else
+static int e1000_resume(struct pci_dev *pdev)
+#endif
{
+#ifdef HAVE_SYSTEM_SLEEP_PM_OPS
struct pci_dev *pdev = to_pci_dev(dev);
+#endif
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
#endif /* CONFIG_PM_SLEEP */
#ifdef CONFIG_PM_RUNTIME
+#ifdef HAVE_SYSTEM_SLEEP_PM_OPS
static int e1000_runtime_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
adapter->idle_check = !dev->power.runtime_auto;
return __e1000_resume(pdev);
}
+#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */
#endif /* CONFIG_PM_RUNTIME */
#endif /* CONFIG_PM */
+#ifndef USE_REBOOT_NOTIFIER
static void e1000_shutdown(struct pci_dev *pdev)
{
bool wake = false;
if (system_state == SYSTEM_POWER_OFF)
e1000_complete_shutdown(pdev, false, wake);
}
+#else
+static struct pci_driver e1000_driver;
+static int e1000_notify_reboot(struct notifier_block *nb, unsigned long event,
+ void *ptr)
+{
+ struct pci_dev *pdev = NULL;
+ bool wake = false;
+
+ switch (event) {
+ case SYS_DOWN:
+ case SYS_HALT:
+ case SYS_POWER_OFF:
+ while ((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) {
+ if (pci_dev_driver(pdev) == &e1000_driver) {
+ __e1000_shutdown(pdev, &wake, false);
+ if (event == SYS_POWER_OFF)
+ e1000_complete_shutdown(pdev, false,
+ wake);
+ }
+ }
+ break;
+ }
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block e1000_notifier_reboot = {
+ .notifier_call = e1000_notify_reboot,
+ .next = NULL,
+ .priority = 0
+};
+#endif /* USE_REBOOT_NOTIFIER */
#ifdef CONFIG_NET_POLL_CONTROLLER
e1000_intr_msi(adapter->pdev->irq, netdev);
enable_irq(adapter->pdev->irq);
break;
- default: /* E1000E_INT_MODE_LEGACY */
+ default: /* E1000E_INT_MODE_LEGACY */
disable_irq(adapter->pdev->irq);
e1000_intr(adapter->pdev->irq, netdev);
enable_irq(adapter->pdev->irq);
}
#endif
+#ifdef HAVE_PCI_ERS
/**
* e1000_io_error_detected - called when PCI error is detected
* @pdev: Pointer to PCI device
err = pci_enable_device_mem(pdev);
if (err) {
- dev_err(&pdev->dev,
+ dev_err(pci_dev_to_dev(pdev),
"Cannot re-enable PCI device after reset.\n");
result = PCI_ERS_RESULT_DISCONNECT;
} else {
pci_set_master(pdev);
- pdev->state_saved = true;
pci_restore_state(pdev);
+ pci_save_state(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
if (netif_running(netdev)) {
if (e1000e_up(adapter)) {
- dev_err(&pdev->dev,
+ dev_err(pci_dev_to_dev(pdev),
"can't bring device back up after reset\n");
return;
}
e1000e_get_hw_control(adapter);
}
+#endif /* HAVE_PCI_ERS */
static void e1000_print_device_info(struct e1000_adapter *adapter)
{
u8 pba_str[E1000_PBANUM_LENGTH];
/* print bus type/speed/width info */
- e_info("(PCI Express:2.5GT/s:%s) %pM\n",
+ e_info("(PCI Express:2.5GT/s:%s) %02x:%02x:%02x:%02x:%02x:%02x\n",
/* bus width */
((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
- "Width x1"),
+ "Width x1"),
/* MAC address */
- netdev->dev_addr);
+ netdev->dev_addr[0], netdev->dev_addr[1],
+ netdev->dev_addr[2], netdev->dev_addr[3],
+ netdev->dev_addr[4], netdev->dev_addr[5]);
e_info("Intel(R) PRO/%s Network Connection\n",
(hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
ret_val = e1000_read_pba_string_generic(hw, pba_str,
le16_to_cpus(&buf);
if (!ret_val && (!(buf & (1 << 0)))) {
/* Deep Smart Power Down (DSPD) */
- dev_warn(&adapter->pdev->dev,
+ dev_warn(pci_dev_to_dev(adapter->pdev),
"Warning: detected DSPD enabled in EEPROM\n");
}
}
+s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ u16 cap_offset;
+
+ cap_offset = pci_find_capability(hw->adapter->pdev, PCI_CAP_ID_EXP);
+ if (!cap_offset)
+ return -E1000_ERR_CONFIG;
+
+ pci_read_config_word(hw->adapter->pdev, cap_offset + reg, value);
+
+ return 0;
+}
+
+#ifdef HAVE_NDO_SET_FEATURES
static int e1000_set_features(struct net_device *netdev,
netdev_features_t features)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- u32 changed = features ^ netdev->features;
+ netdev_features_t changed = features ^ netdev->features;
if (changed & (NETIF_F_TSO | NETIF_F_TSO6))
adapter->flags |= FLAG_TSO_FORCE;
if (!(changed & (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX |
- NETIF_F_RXCSUM | NETIF_F_RXHASH)))
+ NETIF_F_RXCSUM | NETIF_F_RXHASH | NETIF_F_RXFCS |
+ NETIF_F_RXALL)))
return 0;
/*
return -EINVAL;
}
+ if (changed & NETIF_F_RXFCS) {
+ if (features & NETIF_F_RXFCS) {
+ adapter->flags2 &= ~FLAG2_CRC_STRIPPING;
+ } else {
+ /* We need to take it back to defaults, which might mean
+ * stripping is still disabled at the adapter level.
+ */
+ if (adapter->flags2 & FLAG2_DFLT_CRC_STRIPPING)
+ adapter->flags2 |= FLAG2_CRC_STRIPPING;
+ else
+ adapter->flags2 &= ~FLAG2_CRC_STRIPPING;
+ }
+ }
+
netdev->features = features;
if (netif_running(netdev))
return 0;
}
+#endif /* HAVE_NDO_SET_FEATURES */
+#ifdef HAVE_NET_DEVICE_OPS
static const struct net_device_ops e1000e_netdev_ops = {
- .ndo_open = e1000_open,
- .ndo_stop = e1000_close,
- .ndo_start_xmit = e1000_xmit_frame,
- .ndo_get_stats64 = e1000e_get_stats64,
- .ndo_set_rx_mode = e1000e_set_rx_mode,
- .ndo_set_mac_address = e1000_set_mac,
- .ndo_change_mtu = e1000_change_mtu,
- .ndo_do_ioctl = e1000_ioctl,
- .ndo_tx_timeout = e1000_tx_timeout,
- .ndo_validate_addr = eth_validate_addr,
-
- .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid,
- .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid,
+ .ndo_open = e1000_open,
+ .ndo_stop = e1000_close,
+ .ndo_start_xmit = e1000_xmit_frame,
+#ifdef HAVE_NDO_GET_STATS64
+ .ndo_get_stats64 = e1000e_get_stats64,
+#else /* HAVE_NDO_GET_STATS64 */
+ .ndo_get_stats = e1000_get_stats,
+#endif /* HAVE_NDO_GET_STATS64 */
+ .ndo_set_rx_mode = e1000e_set_rx_mode,
+ .ndo_set_mac_address = e1000_set_mac,
+ .ndo_change_mtu = e1000_change_mtu,
+ .ndo_do_ioctl = e1000_ioctl,
+ .ndo_tx_timeout = e1000_tx_timeout,
+ .ndo_validate_addr = eth_validate_addr,
+
+#ifdef NETIF_F_HW_VLAN_TX
+#ifdef HAVE_VLAN_RX_REGISTER
+ .ndo_vlan_rx_register = e1000_vlan_rx_register,
+#endif
+ .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid,
+#endif
#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = e1000_netpoll,
+ .ndo_poll_controller = e1000_netpoll,
#endif
+#ifdef HAVE_NDO_SET_FEATURES
.ndo_set_features = e1000_set_features,
+#endif /* HAVE_NDO_SET_FEATURES */
};
+#endif /* HAVE_NET_DEVICE_OPS */
/**
* e1000_probe - Device Initialization Routine
* @pdev: PCI device information struct
- * @ent: entry in e1000_pci_tbl
+ * @ent: entry in e1000e_pci_tbl
*
* Returns 0 on success, negative on failure
*
const struct e1000_info *ei = e1000_info_tbl[ent->driver_data];
resource_size_t mmio_start, mmio_len;
resource_size_t flash_start, flash_len;
-
static int cards_found;
u16 aspm_disable_flag = 0;
int i, err, pci_using_dac;
return err;
pci_using_dac = 0;
- err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
+ err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64));
if (!err) {
- err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
+ err =
+ dma_set_coherent_mask(pci_dev_to_dev(pdev),
+ DMA_BIT_MASK(64));
if (!err)
pci_using_dac = 1;
} else {
- err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+ err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32));
if (err) {
- err = dma_set_coherent_mask(&pdev->dev,
+ err = dma_set_coherent_mask(pci_dev_to_dev(pdev),
DMA_BIT_MASK(32));
if (err) {
- dev_err(&pdev->dev, "No usable DMA configuration, aborting\n");
+ dev_err(pci_dev_to_dev(pdev),
+ "No usable DMA configuration, aborting\n");
goto err_dma;
}
}
}
+/* *INDENT-OFF* */
err = pci_request_selected_regions_exclusive(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM),
- e1000e_driver_name);
+ pci_select_bars(pdev, IORESOURCE_MEM),
+ e1000e_driver_name);
+/* *INDENT-ON* */
if (err)
goto err_pci_reg;
pci_enable_pcie_error_reporting(pdev);
pci_set_master(pdev);
- /* PCI config space info */
- err = pci_save_state(pdev);
- if (err)
- goto err_alloc_etherdev;
err = -ENOMEM;
netdev = alloc_etherdev(sizeof(struct e1000_adapter));
if (!netdev)
goto err_alloc_etherdev;
- SET_NETDEV_DEV(netdev, &pdev->dev);
+ SET_MODULE_OWNER(netdev);
+ SET_NETDEV_DEV(netdev, pci_dev_to_dev(pdev));
netdev->irq = pdev->irq;
pci_set_drvdata(pdev, netdev);
+#ifdef HAVE_PCI_ERS
+ /* PCI config space info */
+ err = pci_save_state(pdev);
+ if (err)
+ goto err_ioremap;
+#endif /* HAVE_PCI_ERS */
adapter = netdev_priv(netdev);
hw = &adapter->hw;
+ adapter->node = -1;
adapter->netdev = netdev;
adapter->pdev = pdev;
adapter->ei = ei;
adapter->hw.adapter = adapter;
adapter->hw.mac.type = ei->mac;
adapter->max_hw_frame_size = ei->max_hw_frame_size;
- adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
+ adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
mmio_start = pci_resource_start(pdev, 0);
mmio_len = pci_resource_len(pdev, 0);
}
/* construct the net_device struct */
- netdev->netdev_ops = &e1000e_netdev_ops;
+#ifdef HAVE_NET_DEVICE_OPS
+ netdev->netdev_ops = &e1000e_netdev_ops;
+#else
+ netdev->open = &e1000_open;
+ netdev->stop = &e1000_close;
+ netdev->hard_start_xmit = &e1000_xmit_frame;
+ netdev->get_stats = &e1000_get_stats;
+#ifdef HAVE_SET_RX_MODE
+ netdev->set_rx_mode = &e1000e_set_rx_mode;
+#endif
+ netdev->set_multicast_list = &e1000e_set_rx_mode;
+ netdev->set_mac_address = &e1000_set_mac;
+ netdev->change_mtu = &e1000_change_mtu;
+ netdev->do_ioctl = &e1000_ioctl;
+ netdev->tx_timeout = &e1000_tx_timeout;
+#ifdef NETIF_F_HW_VLAN_TX
+ netdev->vlan_rx_register = e1000_vlan_rx_register;
+ netdev->vlan_rx_add_vid = e1000_vlan_rx_add_vid;
+ netdev->vlan_rx_kill_vid = e1000_vlan_rx_kill_vid;
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ netdev->poll_controller = e1000_netpoll;
+#endif
+#endif /* HAVE_NET_DEVICE_OPS */
e1000e_set_ethtool_ops(netdev);
- netdev->watchdog_timeo = 5 * HZ;
- netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
+ netdev->watchdog_timeo = 5 * HZ;
+#ifdef CONFIG_E1000E_NAPI
+ netif_napi_add(netdev, &adapter->napi, e1000e_poll, 64);
+#endif
strlcpy(netdev->name, pci_name(pdev), sizeof(netdev->name));
netdev->mem_start = mmio_start;
e1000e_check_options(adapter);
+ if (adapter->node >= 0)
+ dev_info(pci_dev_to_dev(pdev),
+ "Using NUMA node %d for memory allocations\n",
+ adapter->node);
+
/* setup adapter struct */
err = e1000_sw_init(adapter);
if (err)
goto err_sw_init;
- memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
- memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
- memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
-
- err = ei->get_variants(adapter);
- if (err)
- goto err_hw_init;
-
- if ((adapter->flags & FLAG_IS_ICH) &&
- (adapter->flags & FLAG_READ_ONLY_NVM))
- e1000e_write_protect_nvm_ich8lan(&adapter->hw);
+ if (ei->get_variants) {
+ err = ei->get_variants(adapter);
+ if (err)
+ goto err_hw_init;
+ }
hw->mac.ops.get_bus_info(&adapter->hw);
adapter->hw.phy.ms_type = e1000_ms_hw_default;
}
- if (e1000_check_reset_block(&adapter->hw))
+ if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
e_info("PHY reset is blocked due to SOL/IDER session.\n");
/* Set initial default active device features */
netdev->features = (NETIF_F_SG |
- NETIF_F_HW_VLAN_RX |
- NETIF_F_HW_VLAN_TX |
+#ifdef NETIF_F_HW_VLAN_TX
+ NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX |
+#endif
+#ifdef NETIF_F_TSO
NETIF_F_TSO |
+#ifdef NETIF_F_TSO6
NETIF_F_TSO6 |
+#endif
+#endif
+#if defined(NETIF_F_RXHASH) && defined(HAVE_NDO_SET_FEATURES)
NETIF_F_RXHASH |
+#endif
+#ifdef NETIF_F_RXCSUM
NETIF_F_RXCSUM |
+#endif
NETIF_F_HW_CSUM);
+#ifdef HAVE_NDO_SET_FEATURES
/* Set user-changeable features (subset of all device features) */
netdev->hw_features = netdev->features;
+ netdev->hw_features |= NETIF_F_RXFCS;
+#ifdef IFF_SUPP_NOFCS
+ netdev->priv_flags |= IFF_SUPP_NOFCS;
+#endif /* IFF_SUPP_NOFCS */
+ netdev->hw_features |= NETIF_F_RXALL;
+#else /* HAVE_NDO_SET_FEATURES */
+#ifdef NETIF_F_GRO
+ /* only needed for <2.6.39; otherwise set in register_netdevice() */
+ netdev->features |= NETIF_F_GRO;
+#endif
+#endif /* HAVE_NDO_SET_FEATURES */
+#ifdef NETIF_F_HW_VLAN_FILTER
if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
netdev->features |= NETIF_F_HW_VLAN_FILTER;
+#endif /* NETIF_F_HW_VLAN_FILTER */
+#ifdef HAVE_NETDEV_VLAN_FEATURES
netdev->vlan_features |= (NETIF_F_SG |
+#ifdef NETIF_F_TSO
NETIF_F_TSO |
+#endif
+#ifdef NETIF_F_TSO6
NETIF_F_TSO6 |
+#endif
NETIF_F_HW_CSUM);
+#endif /* HAVE_NETDEV_VLAN_FEATURES */
+#ifdef IFF_UNICAST_FLT
netdev->priv_flags |= IFF_UNICAST_FLT;
+#endif /* IFF_UNICAST_FLT */
if (pci_using_dac) {
netdev->features |= NETIF_F_HIGHDMA;
+#ifdef HAVE_NETDEV_VLAN_FEATURES
netdev->vlan_features |= NETIF_F_HIGHDMA;
+#endif /* HAVE_NETDEV_VLAN_FEATURES */
}
if (e1000e_enable_mng_pass_thru(&adapter->hw))
e_err("NVM Read Error while reading MAC address\n");
memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
+#ifdef ETHTOOL_GPERMADDR
memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
if (!is_valid_ether_addr(netdev->perm_addr)) {
- e_err("Invalid MAC Address: %pM\n", netdev->perm_addr);
+#else
+ if (!is_valid_ether_addr(netdev->dev_addr)) {
+#endif
+ e_err("Invalid MAC Address: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ netdev->dev_addr[0], netdev->dev_addr[1],
+ netdev->dev_addr[2], netdev->dev_addr[3],
+ netdev->dev_addr[4], netdev->dev_addr[5]);
err = -EIO;
goto err_eeprom;
}
init_timer(&adapter->watchdog_timer);
adapter->watchdog_timer.function = e1000_watchdog;
- adapter->watchdog_timer.data = (unsigned long) adapter;
+ adapter->watchdog_timer.data = (unsigned long)adapter;
init_timer(&adapter->phy_info_timer);
adapter->phy_info_timer.function = e1000_update_phy_info;
- adapter->phy_info_timer.data = (unsigned long) adapter;
+ adapter->phy_info_timer.data = (unsigned long)adapter;
INIT_WORK(&adapter->reset_task, e1000_reset_task);
INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang);
+#ifndef HAVE_ETHTOOL_SET_PHYS_ID
+ INIT_WORK(&adapter->led_blink_task, e1000e_led_blink_task);
+#endif
/* Initialize link parameters. User can change them with ethtool */
adapter->hw.mac.autoneg = 1;
} else if (adapter->flags & FLAG_APME_IN_CTRL3) {
if (adapter->flags & FLAG_APME_CHECK_PORT_B &&
(adapter->hw.bus.func == 1))
- e1000_read_nvm(&adapter->hw,
- NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+ e1000_read_nvm(&adapter->hw, NVM_INIT_CONTROL3_PORT_B,
+ 1, &eeprom_data);
else
- e1000_read_nvm(&adapter->hw,
- NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
+ e1000_read_nvm(&adapter->hw, NVM_INIT_CONTROL3_PORT_A,
+ 1, &eeprom_data);
}
/* fetch WoL from EEPROM */
/* initialize the wol settings based on the eeprom settings */
adapter->wol = adapter->eeprom_wol;
- device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+ device_set_wakeup_enable(pci_dev_to_dev(adapter->pdev), adapter->wol);
/* save off EEPROM version number */
e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);
if (!(adapter->flags & FLAG_HAS_AMT))
e1000e_release_hw_control(adapter);
err_eeprom:
- if (!e1000_check_reset_block(&adapter->hw))
+ if (hw->phy.ops.check_reset_block && !hw->phy.ops.check_reset_block(hw))
e1000_phy_hw_reset(&adapter->hw);
err_hw_init:
kfree(adapter->tx_ring);
free_netdev(netdev);
err_alloc_etherdev:
pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
+ pci_select_bars(pdev, IORESOURCE_MEM));
err_pci_reg:
err_dma:
pci_disable_device(pdev);
cancel_work_sync(&adapter->watchdog_task);
cancel_work_sync(&adapter->downshift_task);
cancel_work_sync(&adapter->update_phy_task);
+#ifndef HAVE_ETHTOOL_SET_PHYS_ID
+ cancel_work_sync(&adapter->led_blink_task);
+#endif
cancel_work_sync(&adapter->print_hang_task);
if (!(netdev->flags & IFF_UP))
if (adapter->hw.flash_address)
iounmap(adapter->hw.flash_address);
pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
+ pci_select_bars(pdev, IORESOURCE_MEM));
free_netdev(netdev);
pci_disable_device(pdev);
}
+#ifdef HAVE_PCI_ERS
/* PCI Error Recovery (ERS) */
static struct pci_error_handlers e1000_err_handler = {
.error_detected = e1000_io_error_detected,
.slot_reset = e1000_io_slot_reset,
.resume = e1000_io_resume,
};
+#endif
-static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 },
-
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572 },
-
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 },
-
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574L), board_82574 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574LA), board_82574 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82583V), board_82583 },
-
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT),
- board_80003es2lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT),
- board_80003es2lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_DPT),
- board_80003es2lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT),
- board_80003es2lan },
-
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_AMT), board_ich8lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_82567V_3), board_ich8lan },
-
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_BM), board_ich9lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan },
-
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LM), board_ich9lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_V), board_ich9lan },
-
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_V), board_ich10lan },
-
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LM), board_pchlan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LC), board_pchlan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan },
-
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_LM), board_pch2lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_V), board_pch2lan },
-
- { 0, 0, 0, 0, 0, 0, 0 } /* terminate list */
+static DEFINE_PCI_DEVICE_TABLE(e1000e_pci_tbl) = {
+ {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571},
+ {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571},
+ {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571},
+ {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571},
+ {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571},
+ {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_82574L), board_82574}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_82574LA), board_82574}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_82583V), board_82583}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT),
+ board_80003es2lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT),
+ board_80003es2lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_DPT),
+ board_80003es2lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT),
+ board_80003es2lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_AMT), board_ich8lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_82567V_3), board_ich8lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_BM), board_ich9lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LM), board_ich9lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_V), board_ich9lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_V), board_ich10lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LM), board_pchlan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LC), board_pchlan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_LM), board_pch2lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_V), board_pch2lan}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_LM), board_pch_lpt}, {
+ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_V), board_pch_lpt}, {
+ 0, 0, 0, 0, 0, 0, 0} /* terminate list */
};
-MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
+
+MODULE_DEVICE_TABLE(pci, e1000e_pci_tbl);
#ifdef CONFIG_PM
+#ifdef HAVE_SYSTEM_SLEEP_PM_OPS
static const struct dev_pm_ops e1000_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(e1000_suspend, e1000_resume)
- SET_RUNTIME_PM_OPS(e1000_runtime_suspend,
- e1000_runtime_resume, e1000_idle)
+ SET_RUNTIME_PM_OPS(e1000_runtime_suspend,
+ e1000_runtime_resume, e1000_idle)
};
+#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */
#endif
/* PCI Device API Driver */
static struct pci_driver e1000_driver = {
- .name = e1000e_driver_name,
- .id_table = e1000_pci_tbl,
- .probe = e1000_probe,
- .remove = __devexit_p(e1000_remove),
+ .name = e1000e_driver_name,
+ .id_table = e1000e_pci_tbl,
+ .probe = e1000_probe,
+ .remove = __devexit_p(e1000_remove),
#ifdef CONFIG_PM
- .driver = {
- .pm = &e1000_pm_ops,
- },
+#ifdef HAVE_SYSTEM_SLEEP_PM_OPS
+ .driver = {
+ .pm = &e1000_pm_ops,
+ },
+#elif defined(CONFIG_PM_SLEEP)
+ .suspend = e1000_suspend,
+ .resume = e1000_resume,
+#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */
#endif
+#ifndef USE_REBOOT_NOTIFIER
.shutdown = e1000_shutdown,
+#endif
+#ifdef HAVE_PCI_ERS
.err_handler = &e1000_err_handler
+#endif
};
/**
e1000e_driver_version);
pr_info("Copyright(c) 1999 - 2012 Intel Corporation.\n");
ret = pci_register_driver(&e1000_driver);
+#ifdef USE_REBOOT_NOTIFIER
+ if (ret >= 0)
+ register_reboot_notifier(&e1000_notifier_reboot);
+#endif
return ret;
}
+
module_init(e1000_init_module);
/**
**/
static void __exit e1000_exit_module(void)
{
+#ifdef USE_REBOOT_NOTIFIER
+ unregister_reboot_notifier(&e1000_notifier_reboot);
+#endif
pci_unregister_driver(&e1000_driver);
}
-module_exit(e1000_exit_module);
+module_exit(e1000_exit_module);
MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
-/* e1000_main.c */
+/* netdev.c */
#include "e1000.h"
+static void e1000e_reload_nvm_generic(struct e1000_hw *hw);
+
+/**
+ * e1000_init_nvm_ops_generic - Initialize NVM function pointers
+ * @hw: pointer to the HW structure
+ *
+ * Setups up the function pointers to no-op functions
+ **/
+void e1000_init_nvm_ops_generic(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ /* Initialize function pointers */
+ nvm->ops.reload = e1000e_reload_nvm_generic;
+}
+
/**
* e1000_raise_eec_clk - Raise EEPROM clock
* @hw: pointer to the HW structure
u16 data;
eecd = er32(EECD);
-
eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
data = 0;
ew32(EECD, eecd | E1000_EECD_REQ);
eecd = er32(EECD);
-
while (timeout) {
if (eecd & E1000_EECD_GNT)
break;
}
/**
- * e1000e_reload_nvm - Reloads EEPROM
+ * e1000e_reload_nvm_generic - Reloads EEPROM
* @hw: pointer to the HW structure
*
* Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the
* extended control register.
**/
-void e1000e_reload_nvm(struct e1000_hw *hw)
+static void e1000e_reload_nvm_generic(struct e1000_hw *hw)
{
u32 ctrl_ext;
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2012 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_NVM_H_
+#define _E1000_NVM_H_
+
+void e1000_init_nvm_ops_generic(struct e1000_hw *hw);
+s32 e1000e_acquire_nvm(struct e1000_hw *hw);
+
+s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg);
+s32 e1000_read_mac_addr_generic(struct e1000_hw *hw);
+s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
+ u32 pba_num_size);
+s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data);
+s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw);
+s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw);
+void e1000e_release_nvm(struct e1000_hw *hw);
+
+#define E1000_STM_OPCODE 0xDB00
+#endif
unsigned int copybreak = COPYBREAK_DEFAULT;
module_param(copybreak, uint, 0644);
MODULE_PARM_DESC(copybreak,
- "Maximum size of packet that is copied to a new buffer on receive");
+ "Maximum size of packet that is copied to a new buffer on receive");
/*
* All parameters are treated the same, as an integer array of values.
*/
#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
+#ifndef module_param_array
+/* Module Parameters are always initialized to -1, so that the driver
+ * can tell the difference between no user specified value or the
+ * user asking for the default value.
+ * The true default values are loaded in when e1000e_check_options is called.
+ *
+ * This is a GCC extension to ANSI C.
+ * See the item "Labeled Elements in Initializers" in the section
+ * "Extensions to the C Language Family" of the GCC documentation.
+ */
+#define E1000_PARAM(X, desc) \
+ static const int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
+ static unsigned int num_##X; \
+ MODULE_PARM(X, "1-" __MODULE_STRING(E1000_MAX_NIC) "i"); \
+ MODULE_PARM_DESC(X, desc);
+#else
#define E1000_PARAM(X, desc) \
static int __devinitdata X[E1000_MAX_NIC+1] \
= E1000_PARAM_INIT; \
static unsigned int num_##X; \
module_param_array_named(X, X, int, &num_##X, 0); \
MODULE_PARM_DESC(X, desc);
+#endif
/*
* Transmit Interrupt Delay in units of 1.024 microseconds
/*
* Interrupt Throttle Rate (interrupts/sec)
*
- * Valid Range: 100-100000 or one of: 0=off, 1=dynamic, 3=dynamic conservative
+ * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
*/
E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
#define DEFAULT_ITR 3
E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
/*
- * Write Protect NVM
+ * Enable CRC Stripping
*
* Valid Range: 0, 1
*
* Default Value: 1 (enabled)
*/
-E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
+E1000_PARAM(CrcStripping,
+ "Enable CRC Stripping, disable if your BMC needs the CRC");
/*
- * Enable CRC Stripping
+ * Enable/disable EEE (a.k.a. IEEE802.3az)
*
* Valid Range: 0, 1
*
- * Default Value: 1 (enabled)
+ * Default Value: 1
*/
-E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \
- "the CRC");
+E1000_PARAM(EEE, "Enable/disable on parts that support the feature");
+
+/* Enable node specific allocation of all data structures, typically
+ * specific to routing setups, not generally useful.
+ *
+ * Depends on: NUMA configuration
+ *
+ * Valid Range: -1, 0-32768
+ *
+ * Default Value: -1 (disabled, default to kernel choice of node)
+ */
+E1000_PARAM(Node, "[ROUTING] Node to allocate memory on, default -1");
struct e1000_option {
enum { enable_option, range_option, list_option } type;
const char *err;
int def;
union {
- struct { /* range_option info */
+ struct { /* range_option info */
int min;
int max;
} r;
- struct { /* list_option info */
+ struct { /* list_option info */
int nr;
- struct e1000_opt_list { int i; char *str; } *p;
+ struct e1000_opt_list {
+ int i;
+ char *str;
+ } *p;
} l;
} arg;
};
return 0;
}
break;
- case list_option: {
- int i;
- struct e1000_opt_list *ent;
-
- for (i = 0; i < opt->arg.l.nr; i++) {
- ent = &opt->arg.l.p[i];
- if (*value == ent->i) {
- if (ent->str[0] != '\0')
- e_info("%s\n", ent->str);
- return 0;
+ case list_option:{
+ int i;
+ struct e1000_opt_list *ent;
+
+ for (i = 0; i < opt->arg.l.nr; i++) {
+ ent = &opt->arg.l.p[i];
+ if (*value == ent->i) {
+ if (ent->str[0] != '\0')
+ e_info("%s\n", ent->str);
+ return 0;
+ }
}
}
- }
break;
default:
BUG();
e_notice("Using defaults for all values\n");
}
- { /* Transmit Interrupt Delay */
+ { /* Transmit Interrupt Delay */
+/* *INDENT-OFF* */
static const struct e1000_option opt = {
.type = range_option,
.name = "Transmit Interrupt Delay",
.arg = { .r = { .min = MIN_TXDELAY,
.max = MAX_TXDELAY } }
};
+/* *INDENT-ON* */
if (num_TxIntDelay > bd) {
adapter->tx_int_delay = TxIntDelay[bd];
adapter->tx_int_delay = opt.def;
}
}
- { /* Transmit Absolute Interrupt Delay */
+ { /* Transmit Absolute Interrupt Delay */
+/* *INDENT-OFF* */
static const struct e1000_option opt = {
.type = range_option,
.name = "Transmit Absolute Interrupt Delay",
.arg = { .r = { .min = MIN_TXABSDELAY,
.max = MAX_TXABSDELAY } }
};
+/* *INDENT-ON* */
if (num_TxAbsIntDelay > bd) {
adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
adapter->tx_abs_int_delay = opt.def;
}
}
- { /* Receive Interrupt Delay */
+ { /* Receive Interrupt Delay */
+/* *INDENT-OFF* */
static struct e1000_option opt = {
.type = range_option,
.name = "Receive Interrupt Delay",
.arg = { .r = { .min = MIN_RXDELAY,
.max = MAX_RXDELAY } }
};
+/* *INDENT-ON* */
if (num_RxIntDelay > bd) {
adapter->rx_int_delay = RxIntDelay[bd];
adapter->rx_int_delay = opt.def;
}
}
- { /* Receive Absolute Interrupt Delay */
+ { /* Receive Absolute Interrupt Delay */
+/* *INDENT-OFF* */
static const struct e1000_option opt = {
.type = range_option,
.name = "Receive Absolute Interrupt Delay",
.arg = { .r = { .min = MIN_RXABSDELAY,
.max = MAX_RXABSDELAY } }
};
+/* *INDENT-ON* */
if (num_RxAbsIntDelay > bd) {
adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
adapter->rx_abs_int_delay = opt.def;
}
}
- { /* Interrupt Throttling Rate */
+ { /* Interrupt Throttling Rate */
+/* *INDENT-OFF* */
static const struct e1000_option opt = {
.type = range_option,
.name = "Interrupt Throttling Rate (ints/sec)",
.arg = { .r = { .min = MIN_ITR,
.max = MAX_ITR } }
};
+/* *INDENT-ON* */
if (num_InterruptThrottleRate > bd) {
adapter->itr = InterruptThrottleRate[bd];
-
- /*
- * Make sure a message is printed for non-special
- * values. And in case of an invalid option, display
- * warning, use default and got through itr/itr_setting
- * adjustment logic below
- */
- if ((adapter->itr > 4) &&
- e1000_validate_option(&adapter->itr, &opt, adapter))
- adapter->itr = opt.def;
+ switch (adapter->itr) {
+ case 0:
+ e_info("%s turned off\n", opt.name);
+ break;
+ case 1:
+ e_info("%s set to dynamic mode\n", opt.name);
+ adapter->itr_setting = adapter->itr;
+ adapter->itr = 20000;
+ break;
+ case 3:
+ e_info("%s set to dynamic conservative mode\n",
+ opt.name);
+ adapter->itr_setting = adapter->itr;
+ adapter->itr = 20000;
+ break;
+ case 4:
+ e_info("%s set to simplified (2000-8000 ints) mode\n",
+ opt.name);
+ adapter->itr_setting = 4;
+ break;
+ default:
+ /*
+ * Save the setting, because the dynamic bits
+ * change itr.
+ */
+ if (e1000_validate_option(&adapter->itr, &opt,
+ adapter) &&
+ (adapter->itr == 3)) {
+ /*
+ * In case of invalid user value,
+ * default to conservative mode.
+ */
+ adapter->itr_setting = adapter->itr;
+ adapter->itr = 20000;
+ } else {
+ /*
+ * Clear the lower two bits because
+ * they are used as control.
+ */
+ adapter->itr_setting =
+ adapter->itr & ~3;
+ }
+ break;
+ }
} else {
- /*
- * If no option specified, use default value and go
- * through the logic below to adjust itr/itr_setting
- */
- adapter->itr = opt.def;
-
- /*
- * Make sure a message is printed for non-special
- * default values
- */
- if (adapter->itr > 40)
- e_info("%s set to default %d\n", opt.name,
- adapter->itr);
- }
-
- adapter->itr_setting = adapter->itr;
- switch (adapter->itr) {
- case 0:
- e_info("%s turned off\n", opt.name);
- break;
- case 1:
- e_info("%s set to dynamic mode\n", opt.name);
+ adapter->itr_setting = opt.def;
adapter->itr = 20000;
- break;
- case 3:
- e_info("%s set to dynamic conservative mode\n",
- opt.name);
- adapter->itr = 20000;
- break;
- case 4:
- e_info("%s set to simplified (2000-8000 ints) mode\n",
- opt.name);
- break;
- default:
- /*
- * Save the setting, because the dynamic bits
- * change itr.
- *
- * Clear the lower two bits because
- * they are used as control.
- */
- adapter->itr_setting &= ~3;
- break;
}
}
- { /* Interrupt Mode */
+ { /* Interrupt Mode */
static struct e1000_option opt = {
.type = range_option,
.name = "Interrupt Mode",
#ifndef CONFIG_PCI_MSI
+/* *INDENT-OFF* */
.err = "defaulting to 0 (legacy)",
.def = E1000E_INT_MODE_LEGACY,
.arg = { .r = { .min = 0,
.max = 0 } }
+/* *INDENT-ON* */
#endif
};
}
if (!opt.err) {
- dev_err(&adapter->pdev->dev,
+ dev_err(pci_dev_to_dev(adapter->pdev),
"Failed to allocate memory\n");
return;
}
kfree(opt.err);
#endif
}
- { /* Smart Power Down */
+ { /* Smart Power Down */
static const struct e1000_option opt = {
.type = enable_option,
.name = "PHY Smart Power Down",
- .err = "defaulting to Disabled",
- .def = OPTION_DISABLED
+ .err = "defaulting to Disabled",
+ .def = OPTION_DISABLED
};
if (num_SmartPowerDownEnable > bd) {
adapter->flags |= FLAG_SMART_POWER_DOWN;
}
}
- { /* CRC Stripping */
+ { /* CRC Stripping */
static const struct e1000_option opt = {
.type = enable_option,
.name = "CRC Stripping",
- .err = "defaulting to Enabled",
- .def = OPTION_ENABLED
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
};
if (num_CrcStripping > bd) {
unsigned int crc_stripping = CrcStripping[bd];
e1000_validate_option(&crc_stripping, &opt, adapter);
- if (crc_stripping == OPTION_ENABLED)
+ if (crc_stripping == OPTION_ENABLED) {
adapter->flags2 |= FLAG2_CRC_STRIPPING;
+ adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
+ }
} else {
adapter->flags2 |= FLAG2_CRC_STRIPPING;
+ adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
}
}
- { /* Kumeran Lock Loss Workaround */
+ { /* Kumeran Lock Loss Workaround */
static const struct e1000_option opt = {
.type = enable_option,
.name = "Kumeran Lock Loss Workaround",
- .err = "defaulting to Enabled",
- .def = OPTION_ENABLED
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
};
if (num_KumeranLockLoss > bd) {
e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
if (hw->mac.type == e1000_ich8lan)
e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
- kmrn_lock_loss);
+ kmrn_lock_loss);
} else {
if (hw->mac.type == e1000_ich8lan)
e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
- opt.def);
+ opt.
+ def);
}
}
- { /* Write-protect NVM */
+ { /* EEE for parts supporting the feature */
static const struct e1000_option opt = {
.type = enable_option,
- .name = "Write-protect NVM",
- .err = "defaulting to Enabled",
- .def = OPTION_ENABLED
+ .name = "EEE Support",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
};
- if (adapter->flags & FLAG_IS_ICH) {
- if (num_WriteProtectNVM > bd) {
- unsigned int write_protect_nvm = WriteProtectNVM[bd];
- e1000_validate_option(&write_protect_nvm, &opt,
- adapter);
- if (write_protect_nvm)
- adapter->flags |= FLAG_READ_ONLY_NVM;
+ if (adapter->flags2 & FLAG2_HAS_EEE) {
+ /* Currently only supported on 82579 */
+ if (num_EEE > bd) {
+ unsigned int eee = EEE[bd];
+ e1000_validate_option(&eee, &opt, adapter);
+ hw->dev_spec.ich8lan.eee_disable = !eee;
} else {
- if (opt.def)
- adapter->flags |= FLAG_READ_ONLY_NVM;
+ hw->dev_spec.ich8lan.eee_disable = !opt.def;
}
}
}
+ { /* configure node specific allocation */
+/* *INDENT-OFF* */
+ static struct e1000_option opt = {
+ .type = range_option,
+ .name = "Node used to allocate memory",
+ .err = "defaulting to -1 (disabled)",
+#ifdef HAVE_EARLY_VMALLOC_NODE
+ .def = 0,
+#else
+ .def = -1,
+#endif
+ .arg = { .r = { .min = 0,
+ .max = MAX_NUMNODES - 1 } }
+ };
+/* *INDENT-ON* */
+ int node = opt.def;
+
+ /* if the default was zero then we need to set the
+ * default value to an online node, which is not
+ * necessarily zero, and the constant initializer
+ * above can't take first_online_node */
+ if (node == 0)
+ /* must set opt.def for validate */
+ opt.def = node = first_online_node;
+
+ if (num_Node > bd) {
+ node = Node[bd];
+ e1000_validate_option((unsigned int *)&node, &opt,
+ adapter);
+ if (node != OPTION_UNSET)
+ e_info("node used for allocation: %d\n", node);
+ }
+
+ /* check sanity of the value */
+ if ((node != -1) && !node_online(node)) {
+ e_info("ignoring node set to invalid value %d\n", node);
+ node = opt.def;
+ }
+
+ adapter->node = node;
+ }
}
#include "e1000.h"
-static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw);
-static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw);
-static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active);
-static s32 e1000_wait_autoneg(struct e1000_hw *hw);
+static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw);
static u32 e1000_get_phy_addr_for_bm_page(u32 page, u32 reg);
static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
u16 *data, bool read, bool page_set);
static u32 e1000_get_phy_addr_for_hv_page(u32 page);
static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
- u16 *data, bool read);
+ u16 *data, bool read);
/* Cable length tables */
static const u16 e1000_m88_cable_length_table[] = {
- 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+ 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED
+};
+
#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
- ARRAY_SIZE(e1000_m88_cable_length_table)
+ (sizeof(e1000_m88_cable_length_table) / \
+ sizeof(e1000_m88_cable_length_table[0]))
static const u16 e1000_igp_2_cable_length_table[] = {
0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82,
87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95,
100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121,
- 124};
+ 124
+};
+
#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
- ARRAY_SIZE(e1000_igp_2_cable_length_table)
-
-#define BM_PHY_REG_PAGE(offset) \
- ((u16)(((offset) >> PHY_PAGE_SHIFT) & 0xFFFF))
-#define BM_PHY_REG_NUM(offset) \
- ((u16)(((offset) & MAX_PHY_REG_ADDRESS) |\
- (((offset) >> (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)) &\
- ~MAX_PHY_REG_ADDRESS)))
-
-#define HV_INTC_FC_PAGE_START 768
-#define I82578_ADDR_REG 29
-#define I82577_ADDR_REG 16
-#define I82577_CFG_REG 22
-#define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15)
-#define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift 100/10 */
-#define I82577_CTRL_REG 23
-
-/* 82577 specific PHY registers */
-#define I82577_PHY_CTRL_2 18
-#define I82577_PHY_STATUS_2 26
-#define I82577_PHY_DIAG_STATUS 31
-
-/* I82577 PHY Status 2 */
-#define I82577_PHY_STATUS2_REV_POLARITY 0x0400
-#define I82577_PHY_STATUS2_MDIX 0x0800
-#define I82577_PHY_STATUS2_SPEED_MASK 0x0300
-#define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200
-
-/* I82577 PHY Control 2 */
-#define I82577_PHY_CTRL2_AUTO_MDIX 0x0400
-#define I82577_PHY_CTRL2_FORCE_MDI_MDIX 0x0200
-
-/* I82577 PHY Diagnostics Status */
-#define I82577_DSTATUS_CABLE_LENGTH 0x03FC
-#define I82577_DSTATUS_CABLE_LENGTH_SHIFT 2
-
-/* BM PHY Copper Specific Control 1 */
-#define BM_CS_CTRL1 16
-
-#define HV_MUX_DATA_CTRL PHY_REG(776, 16)
-#define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400
-#define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004
+ (sizeof(e1000_igp_2_cable_length_table) / \
+ sizeof(e1000_igp_2_cable_length_table[0]))
/**
* e1000e_check_reset_block_generic - Check if PHY reset is blocked
manc = er32(MANC);
- return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ?
- E1000_BLK_PHY_RESET : 0;
+ return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? E1000_BLK_PHY_RESET : 0;
}
/**
* PHY to retrieve the desired data.
*/
mdic = ((offset << E1000_MDIC_REG_SHIFT) |
- (phy->addr << E1000_MDIC_PHY_SHIFT) |
- (E1000_MDIC_OP_READ));
+ (phy->addr << E1000_MDIC_PHY_SHIFT) | (E1000_MDIC_OP_READ));
ew32(MDIC, mdic);
e_dbg("MDI Error\n");
return -E1000_ERR_PHY;
}
- *data = (u16) mdic;
+ *data = (u16)mdic;
/*
* Allow some time after each MDIC transaction to avoid
*/
mdic = (((u32)data) |
(offset << E1000_MDIC_REG_SHIFT) |
- (phy->addr << E1000_MDIC_PHY_SHIFT) |
- (E1000_MDIC_OP_WRITE));
+ (phy->addr << E1000_MDIC_PHY_SHIFT) | (E1000_MDIC_OP_WRITE));
ew32(MDIC, mdic);
* semaphores before exiting.
**/
static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
- bool locked)
+ bool locked)
{
s32 ret_val = 0;
* at the offset. Release any acquired semaphores before exiting.
**/
static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
- bool locked)
+ bool locked)
{
s32 ret_val = 0;
(u16)offset);
if (!ret_val)
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS &
- offset,
- data);
+ offset, data);
if (!locked)
hw->phy.ops.release(hw);
* Release any acquired semaphores before exiting.
**/
static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
- bool locked)
+ bool locked)
{
u32 kmrnctrlsta;
* before exiting.
**/
static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
- bool locked)
+ bool locked)
{
u32 kmrnctrlsta;
return __e1000_write_kmrn_reg(hw, offset, data, true);
}
+/**
+ * e1000_set_master_slave_mode - Setup PHY for Master/slave mode
+ * @hw: pointer to the HW structure
+ *
+ * Sets up Master/slave mode
+ **/
+static s32 e1000_set_master_slave_mode(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ /* Resolve Master/Slave mode */
+ ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* load defaults for future use */
+ hw->phy.original_ms_type = (phy_data & CR_1000T_MS_ENABLE) ?
+ ((phy_data & CR_1000T_MS_VALUE) ?
+ e1000_ms_force_master : e1000_ms_force_slave) : e1000_ms_auto;
+
+ switch (hw->phy.ms_type) {
+ case e1000_ms_force_master:
+ phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_force_slave:
+ phy_data |= CR_1000T_MS_ENABLE;
+ phy_data &= ~(CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_auto:
+ phy_data &= ~CR_1000T_MS_ENABLE;
+ /* fall-through */
+ default:
+ break;
+ }
+
+ return e1e_wphy(hw, PHY_1000T_CTRL, phy_data);
+}
+
/**
* e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link
* @hw: pointer to the HW structure
/* Enable downshift */
phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
- return e1e_wphy(hw, I82577_CFG_REG, phy_data);
+ ret_val = e1e_wphy(hw, I82577_CFG_REG, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ return e1000_set_master_slave_mode(hw);
}
/**
* 1 - Enabled
*/
phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
- if (phy->disable_polarity_correction == 1)
+ if (phy->disable_polarity_correction)
phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
/* Enable downshift on BM (disabled by default) */
- if (phy->type == e1000_phy_bm)
+ if (phy->type == e1000_phy_bm) {
+ /* For 82574/82583, first disable then enable downshift */
+ if (phy->id == BME1000_E_PHY_ID_R2) {
+ phy_data &= ~BME1000_PSCR_ENABLE_DOWNSHIFT;
+ ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ /* Commit the changes. */
+ ret_val = e1000e_commit_phy(hw);
+ if (ret_val) {
+ e_dbg("Error committing the PHY changes\n");
+ return ret_val;
+ }
+ }
+
phy_data |= BME1000_PSCR_ENABLE_DOWNSHIFT;
+ }
ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
if (ret_val)
phy_data |= M88E1000_EPSCR_TX_CLK_25;
- if ((phy->revision == 2) &&
- (phy->id == M88E1111_I_PHY_ID)) {
+ if ((phy->revision == 2) && (phy->id == M88E1111_I_PHY_ID)) {
/* 82573L PHY - set the downshift counter to 5x. */
phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK;
phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
msleep(100);
/* disable lplu d0 during driver init */
- ret_val = e1000_set_d0_lplu_state(hw, false);
- if (ret_val) {
- e_dbg("Error Disabling LPLU D0\n");
- return ret_val;
+ if (hw->phy.ops.set_d0_lplu_state) {
+ ret_val = hw->phy.ops.set_d0_lplu_state(hw, false);
+ if (ret_val) {
+ e_dbg("Error Disabling LPLU D0\n");
+ return ret_val;
+ }
}
/* Configure mdi-mdix settings */
ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &data);
*/
if (phy->autoneg_advertised == ADVERTISE_1000_FULL) {
/* Disable SmartSpeed */
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
+ ret_val = e1e_rphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG, &data);
if (ret_val)
return ret_val;
data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
+ ret_val = e1e_wphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG, data);
if (ret_val)
return ret_val;
return ret_val;
}
- ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &data);
- if (ret_val)
- return ret_val;
-
- /* load defaults for future use */
- phy->original_ms_type = (data & CR_1000T_MS_ENABLE) ?
- ((data & CR_1000T_MS_VALUE) ?
- e1000_ms_force_master :
- e1000_ms_force_slave) :
- e1000_ms_auto;
-
- switch (phy->ms_type) {
- case e1000_ms_force_master:
- data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
- break;
- case e1000_ms_force_slave:
- data |= CR_1000T_MS_ENABLE;
- data &= ~(CR_1000T_MS_VALUE);
- break;
- case e1000_ms_auto:
- data &= ~CR_1000T_MS_ENABLE;
- default:
- break;
- }
- ret_val = e1e_wphy(hw, PHY_1000T_CTRL, data);
+ ret_val = e1000_set_master_slave_mode(hw);
}
return ret_val;
*/
mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS |
NWAY_AR_100TX_HD_CAPS |
- NWAY_AR_10T_FD_CAPS |
- NWAY_AR_10T_HD_CAPS);
+ NWAY_AR_10T_FD_CAPS | NWAY_AR_10T_HD_CAPS);
mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS);
e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);
* The possible values of the "fc" parameter are:
* 0: Flow control is completely disabled
* 1: Rx flow control is enabled (we can receive pause frames
- * but not send pause frames).
+ * but not send pause frames).
* 2: Tx flow control is enabled (we can send pause frames
- * but we do not support receiving pause frames).
+ * but we do not support receiving pause frames).
* 3: Both Rx and Tx flow control (symmetric) are enabled.
* other: No software override. The flow control configuration
- * in the EEPROM is used.
+ * in the EEPROM is used.
*/
switch (hw->fc.current_mode) {
case e1000_fc_none:
* If autoneg_advertised is zero, we assume it was not defaulted
* by the calling code so we set to advertise full capability.
*/
- if (phy->autoneg_advertised == 0)
+ if (!phy->autoneg_advertised)
phy->autoneg_advertised = phy->autoneg_mask;
e_dbg("Reconfiguring auto-neg advertisement params\n");
* check at a later time (for example, callback routine).
*/
if (phy->autoneg_wait_to_complete) {
- ret_val = e1000_wait_autoneg(hw);
+ ret_val = hw->mac.ops.wait_autoneg(hw);
if (ret_val) {
e_dbg("Error while waiting for autoneg to complete\n");
return ret_val;
* depending on user settings.
*/
e_dbg("Forcing Speed and Duplex\n");
- ret_val = e1000_phy_force_speed_duplex(hw);
+ ret_val = hw->phy.ops.force_speed_duplex(hw);
if (ret_val) {
e_dbg("Error Forcing Speed and Duplex\n");
return ret_val;
* Check link status. Wait up to 100 microseconds for link to become
* valid.
*/
- ret_val = e1000e_phy_has_link_generic(hw,
- COPPER_LINK_UP_LIMIT,
- 10,
- &link);
+ ret_val = e1000e_phy_has_link_generic(hw, COPPER_LINK_UP_LIMIT, 10,
+ &link);
if (ret_val)
return ret_val;
if (link) {
e_dbg("Valid link established!!!\n");
- e1000e_config_collision_dist(hw);
+ hw->mac.ops.config_collision_dist(hw);
ret_val = e1000e_config_fc_after_link_up(hw);
} else {
e_dbg("Unable to establish link!!!\n");
if (phy->autoneg_wait_to_complete) {
e_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
- ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
if (ret_val)
return ret_val;
e_dbg("Link taking longer than expected.\n");
/* Try once more */
- ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
}
return ret_val;
e_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
- 100000, &link);
+ 100000, &link);
if (ret_val)
return ret_val;
* We didn't get link.
* Reset the DSP and cross our fingers.
*/
- ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT,
+ ret_val = e1e_wphy(hw,
+ M88E1000_PHY_PAGE_SELECT,
0x001d);
if (ret_val)
return ret_val;
/* Try once more */
ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
- 100000, &link);
+ 100000, &link);
if (ret_val)
return ret_val;
}
if (phy->autoneg_wait_to_complete) {
e_dbg("Waiting for forced speed/duplex link on IFE phy.\n");
- ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
if (ret_val)
return ret_val;
e_dbg("Link taking longer than expected.\n");
/* Try once more */
- ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
if (ret_val)
return ret_val;
}
e_dbg("Forcing 10mb\n");
}
- e1000e_config_collision_dist(hw);
+ hw->mac.ops.config_collision_dist(hw);
ew32(CTRL, ctrl);
}
* SmartSpeed, so performance is maintained.
*/
if (phy->smart_speed == e1000_smart_speed_on) {
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
+ ret_val = e1e_rphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG, &data);
if (ret_val)
return ret_val;
data |= IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
+ ret_val = e1e_wphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG, data);
if (ret_val)
return ret_val;
} else if (phy->smart_speed == e1000_smart_speed_off) {
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
+ ret_val = e1e_rphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG, &data);
if (ret_val)
return ret_val;
data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
+ ret_val = e1e_wphy(hw,
+ IGP01E1000_PHY_PORT_CONFIG, data);
if (ret_val)
return ret_val;
}
case e1000_phy_gg82563:
case e1000_phy_bm:
case e1000_phy_82578:
- offset = M88E1000_PHY_SPEC_STATUS;
- mask = M88E1000_PSSR_DOWNSHIFT;
+ offset = M88E1000_PHY_SPEC_STATUS;
+ mask = M88E1000_PSSR_DOWNSHIFT;
break;
case e1000_phy_igp_2:
case e1000_phy_igp_3:
- offset = IGP01E1000_PHY_LINK_HEALTH;
- mask = IGP01E1000_PLHR_SS_DOWNGRADE;
+ offset = IGP01E1000_PHY_LINK_HEALTH;
+ mask = IGP01E1000_PLHR_SS_DOWNGRADE;
break;
default:
/* speed downshift not supported */
ret_val = e1e_rphy(hw, offset, &phy_data);
if (!ret_val)
- phy->speed_downgraded = (phy_data & mask);
+ phy->speed_downgraded = !!(phy_data & mask);
return ret_val;
}
if (!ret_val)
phy->cable_polarity = (data & M88E1000_PSSR_REV_POLARITY)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
+ ? e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
return ret_val;
}
if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
IGP01E1000_PSSR_SPEED_1000MBPS) {
- offset = IGP01E1000_PHY_PCS_INIT_REG;
- mask = IGP01E1000_PHY_POLARITY_MASK;
+ offset = IGP01E1000_PHY_PCS_INIT_REG;
+ mask = IGP01E1000_PHY_POLARITY_MASK;
} else {
/*
* This really only applies to 10Mbps since
* there is no polarity for 100Mbps (always 0).
*/
- offset = IGP01E1000_PHY_PORT_STATUS;
- mask = IGP01E1000_PSSR_POLARITY_REVERSED;
+ offset = IGP01E1000_PHY_PORT_STATUS;
+ mask = IGP01E1000_PSSR_POLARITY_REVERSED;
}
ret_val = e1e_rphy(hw, offset, &data);
if (!ret_val)
phy->cable_polarity = (data & mask)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
+ ? e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
return ret_val;
}
if (!ret_val)
phy->cable_polarity = (phy_data & mask)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
+ ? e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
return ret_val;
}
* Waits for auto-negotiation to complete or for the auto-negotiation time
* limit to expire, which ever happens first.
**/
-static s32 e1000_wait_autoneg(struct e1000_hw *hw)
+s32 e1000_wait_autoneg(struct e1000_hw *hw)
{
s32 ret_val = 0;
u16 i, phy_status;
* Polls the PHY status register for link, 'iterations' number of times.
**/
s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
- u32 usec_interval, bool *success)
+ u32 usec_interval, bool *success)
{
s32 ret_val = 0;
u16 i, phy_status;
if (phy_status & MII_SR_LINK_STATUS)
break;
if (usec_interval >= 1000)
- mdelay(usec_interval/1000);
+ mdelay(usec_interval / 1000);
else
udelay(usec_interval);
}
return ret_val;
index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
- M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1)
return -E1000_ERR_PHY;
u16 cur_agc_index, max_agc_index = 0;
u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = {
- IGP02E1000_PHY_AGC_A,
- IGP02E1000_PHY_AGC_B,
- IGP02E1000_PHY_AGC_C,
- IGP02E1000_PHY_AGC_D
+ IGP02E1000_PHY_AGC_A,
+ IGP02E1000_PHY_AGC_B,
+ IGP02E1000_PHY_AGC_C,
+ IGP02E1000_PHY_AGC_D
};
/* Read the AGC registers for all channels */
* approximate cable length.
*/
cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
- IGP02E1000_AGC_LENGTH_MASK;
+ IGP02E1000_AGC_LENGTH_MASK;
/* Array index bound check. */
if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) ||
/* Calculate cable length with the error range of +/- 10 meters. */
phy->min_cable_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ?
- (agc_value - IGP02E1000_AGC_RANGE) : 0;
+ (agc_value - IGP02E1000_AGC_RANGE) : 0;
phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE;
phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
+ s32 ret_val;
u16 phy_data;
bool link;
if (ret_val)
return ret_val;
- phy->polarity_correction = (phy_data &
- M88E1000_PSCR_POLARITY_REVERSAL);
+ phy->polarity_correction = !!(phy_data &
+ M88E1000_PSCR_POLARITY_REVERSAL);
ret_val = e1000_check_polarity_m88(hw);
if (ret_val)
if (ret_val)
return ret_val;
- phy->is_mdix = (phy_data & M88E1000_PSSR_MDIX);
+ phy->is_mdix = !!(phy_data & M88E1000_PSSR_MDIX);
if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
ret_val = e1000_get_cable_length(hw);
return ret_val;
phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
+ ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
+ ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
} else {
/* Set values to "undefined" */
phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
if (ret_val)
return ret_val;
- phy->is_mdix = (data & IGP01E1000_PSSR_MDIX);
+ phy->is_mdix = !!(data & IGP01E1000_PSSR_MDIX);
if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
IGP01E1000_PSSR_SPEED_1000MBPS) {
- ret_val = e1000_get_cable_length(hw);
+ ret_val = phy->ops.get_cable_length(hw);
if (ret_val)
return ret_val;
return ret_val;
phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
+ ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
+ ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
} else {
phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
phy->local_rx = e1000_1000t_rx_status_undefined;
ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data);
if (ret_val)
return ret_val;
- phy->polarity_correction = (data & IFE_PSC_AUTO_POLARITY_DISABLE)
- ? false : true;
+ phy->polarity_correction = !(data & IFE_PSC_AUTO_POLARITY_DISABLE);
if (phy->polarity_correction) {
ret_val = e1000_check_polarity_ife(hw);
} else {
/* Polarity is forced */
phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
+ ? e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
}
ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
if (ret_val)
return ret_val;
- phy->is_mdix = (data & IFE_PMC_MDIX_STATUS) ? true : false;
+ phy->is_mdix = !!(data & IFE_PMC_MDIX_STATUS);
/* The following parameters are undefined for 10/100 operation. */
phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
s32 ret_val;
u32 ctrl;
- ret_val = e1000_check_reset_block(hw);
- if (ret_val)
- return 0;
+ if (phy->ops.check_reset_block) {
+ ret_val = phy->ops.check_reset_block(hw);
+ if (ret_val)
+ return 0;
+ }
ret_val = phy->ops.acquire(hw);
if (ret_val)
phy->ops.release(hw);
- return e1000_get_phy_cfg_done(hw);
+ return phy->ops.get_cfg_done(hw);
}
/**
s32 e1000e_get_cfg_done(struct e1000_hw *hw)
{
mdelay(10);
+
return 0;
}
return 0;
}
-/* Internal function pointers */
-
-/**
- * e1000_get_phy_cfg_done - Generic PHY configuration done
- * @hw: pointer to the HW structure
- *
- * Return success if silicon family did not implement a family specific
- * get_cfg_done function.
- **/
-static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw)
-{
- if (hw->phy.ops.get_cfg_done)
- return hw->phy.ops.get_cfg_done(hw);
-
- return 0;
-}
-
-/**
- * e1000_phy_force_speed_duplex - Generic force PHY speed/duplex
- * @hw: pointer to the HW structure
- *
- * When the silicon family has not implemented a forced speed/duplex
- * function for the PHY, simply return 0.
- **/
-static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
-{
- if (hw->phy.ops.force_speed_duplex)
- return hw->phy.ops.force_speed_duplex(hw);
-
- return 0;
-}
-
/**
* e1000e_get_phy_type_from_id - Get PHY type from id
* @phy_id: phy_id read from the phy
case M88E1011_I_PHY_ID:
phy_type = e1000_phy_m88;
break;
- case IGP01E1000_I_PHY_ID: /* IGP 1 & 2 share this */
+ case IGP01E1000_I_PHY_ID: /* IGP 1 & 2 share this */
phy_type = e1000_phy_igp_2;
break;
case GG82563_E_PHY_ID:
case I82579_E_PHY_ID:
phy_type = e1000_phy_82579;
break;
+ case I217_E_PHY_ID:
+ phy_type = e1000_phy_i217;
+ break;
default:
phy_type = e1000_phy_unknown;
break;
* If phy_type is valid, break - we found our
* PHY address
*/
- if (phy_type != e1000_phy_unknown)
+ if (phy_type != e1000_phy_unknown)
return 0;
usleep_range(1000, 2000);
/* Page is shifted left, PHY expects (page x 32) */
ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
- (page << page_shift));
+ (page << page_shift));
if (ret_val)
goto release;
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
+ data);
release:
hw->phy.ops.release(hw);
/* Page is shifted left, PHY expects (page x 32) */
ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
- (page << page_shift));
+ (page << page_shift));
if (ret_val)
goto release;
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
+ data);
release:
hw->phy.ops.release(hw);
return ret_val;
if (read) {
/* Read the Wakeup register page value using opcode 0x12 */
ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
- data);
+ data);
} else {
/* Write the Wakeup register page value using opcode 0x12 */
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
usleep_range(1000, 2000);
}
-/**
- * e1000e_commit_phy - Soft PHY reset
- * @hw: pointer to the HW structure
- *
- * Performs a soft PHY reset on those that apply. This is a function pointer
- * entry point called by drivers.
- **/
-s32 e1000e_commit_phy(struct e1000_hw *hw)
-{
- if (hw->phy.ops.commit)
- return hw->phy.ops.commit(hw);
-
- return 0;
-}
-
-/**
- * e1000_set_d0_lplu_state - Sets low power link up state for D0
- * @hw: pointer to the HW structure
- * @active: boolean used to enable/disable lplu
- *
- * Success returns 0, Failure returns 1
- *
- * The low power link up (lplu) state is set to the power management level D0
- * and SmartSpeed is disabled when active is true, else clear lplu for D0
- * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU
- * is used during Dx states where the power conservation is most important.
- * During driver activity, SmartSpeed should be enabled so performance is
- * maintained. This is a function pointer entry point called by drivers.
- **/
-static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
-{
- if (hw->phy.ops.set_d0_lplu_state)
- return hw->phy.ops.set_d0_lplu_state(hw, active);
-
- return 0;
-}
-
/**
* __e1000_read_phy_reg_hv - Read HV PHY register
* @hw: pointer to the HW structure
if (page > 0 && page < HV_INTC_FC_PAGE_START) {
ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
- data, true);
+ data, true);
goto out;
}
e_dbg("reading PHY page %d (or 0x%x shifted) reg 0x%x\n", page,
page << IGP_PAGE_SHIFT, reg);
- ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
- data);
+ ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, data);
out:
if (!locked)
hw->phy.ops.release(hw);
if (page > 0 && page < HV_INTC_FC_PAGE_START) {
ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
- &data, false);
+ &data, false);
goto out;
}
if ((hw->phy.type == e1000_phy_82578) &&
(hw->phy.revision >= 1) &&
(hw->phy.addr == 2) &&
- ((MAX_PHY_REG_ADDRESS & reg) == 0) && (data & (1 << 11))) {
+ !(MAX_PHY_REG_ADDRESS & reg) && (data & (1 << 11))) {
u16 data2 = 0x7EFF;
ret_val = e1000_access_phy_debug_regs_hv(hw,
(1 << 6) | 0x3,
page << IGP_PAGE_SHIFT, reg);
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
- data);
+ data);
out:
if (!locked)
* These accesses done with PHY address 2 and without using pages.
**/
static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
- u16 *data, bool read)
+ u16 *data, bool read)
{
s32 ret_val;
u32 addr_reg = 0;
/* This takes care of the difference with desktop vs mobile phy */
addr_reg = (hw->phy.type == e1000_phy_82578) ?
- I82578_ADDR_REG : I82577_ADDR_REG;
+ I82578_ADDR_REG : I82577_ADDR_REG;
data_reg = addr_reg + 1;
/* All operations in this function are phy address 2 */
if (ret_val)
return ret_val;
- data &= BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_MASK;
+ data &= BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_MASK;
- if (data != (BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_1000))
+ if (data != (BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_1000))
return 0;
msleep(200);
/* flush the packets in the fifo buffer */
- ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC |
+ ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL,
+ HV_MUX_DATA_CTRL_GEN_TO_MAC |
HV_MUX_DATA_CTRL_FORCE_SPEED);
if (ret_val)
return ret_val;
if (!ret_val)
phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
+ ? e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
return ret_val;
}
if (phy->autoneg_wait_to_complete) {
e_dbg("Waiting for forced speed/duplex link on 82577 phy\n");
- ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
if (ret_val)
return ret_val;
e_dbg("Link taking longer than expected.\n");
/* Try once more */
- ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
}
return ret_val;
if (ret_val)
return ret_val;
- phy->is_mdix = (data & I82577_PHY_STATUS2_MDIX) ? true : false;
+ phy->is_mdix = !!(data & I82577_PHY_STATUS2_MDIX);
if ((data & I82577_PHY_STATUS2_SPEED_MASK) ==
I82577_PHY_STATUS2_SPEED_1000MBPS) {
- ret_val = hw->phy.ops.get_cable_length(hw);
+ ret_val = e1000_get_cable_length(hw);
if (ret_val)
return ret_val;
return ret_val;
phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
+ ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
+ ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
} else {
phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
phy->local_rx = e1000_1000t_rx_status_undefined;
return ret_val;
length = (phy_data & I82577_DSTATUS_CABLE_LENGTH) >>
- I82577_DSTATUS_CABLE_LENGTH_SHIFT;
+ I82577_DSTATUS_CABLE_LENGTH_SHIFT;
if (length == E1000_CABLE_LENGTH_UNDEFINED)
ret_val = -E1000_ERR_PHY;
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2012 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_PHY_H_
+#define _E1000_PHY_H_
+
+s32 e1000e_check_downshift(struct e1000_hw *hw);
+s32 e1000_check_polarity_m88(struct e1000_hw *hw);
+s32 e1000_check_polarity_igp(struct e1000_hw *hw);
+s32 e1000_check_polarity_ife(struct e1000_hw *hw);
+s32 e1000e_check_reset_block_generic(struct e1000_hw *hw);
+s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw);
+s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw);
+s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw);
+s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw);
+s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw);
+s32 e1000e_get_cable_length_m88(struct e1000_hw *hw);
+s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw);
+s32 e1000e_get_cfg_done(struct e1000_hw *hw);
+s32 e1000e_get_phy_id(struct e1000_hw *hw);
+s32 e1000e_get_phy_info_igp(struct e1000_hw *hw);
+s32 e1000e_get_phy_info_m88(struct e1000_hw *hw);
+s32 e1000_get_phy_info_ife(struct e1000_hw *hw);
+s32 e1000e_phy_sw_reset(struct e1000_hw *hw);
+void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
+s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw);
+s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
+s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page);
+s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active);
+s32 e1000e_setup_copper_link(struct e1000_hw *hw);
+s32 e1000_wait_autoneg(struct e1000_hw *hw);
+s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000_phy_reset_dsp(struct e1000_hw *hw);
+s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
+ u32 usec_interval, bool *success);
+s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw);
+enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id);
+s32 e1000e_determine_phy_address(struct e1000_hw *hw);
+s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg);
+s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg);
+s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data);
+void e1000_power_up_phy_copper(struct e1000_hw *hw);
+void e1000_power_down_phy_copper(struct e1000_hw *hw);
+s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000_read_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000_write_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 data);
+s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw);
+s32 e1000_copper_link_setup_82577(struct e1000_hw *hw);
+s32 e1000_check_polarity_82577(struct e1000_hw *hw);
+s32 e1000_get_phy_info_82577(struct e1000_hw *hw);
+s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw);
+s32 e1000_get_cable_length_82577(struct e1000_hw *hw);
+
+#define E1000_MAX_PHY_ADDR 8
+
+/* IGP01E1000 Specific Registers */
+#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */
+#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */
+#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */
+#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */
+#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO */
+#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality */
+#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */
+#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */
+#define BM_PHY_PAGE_SELECT 22 /* Page Select for BM */
+#define IGP_PAGE_SHIFT 5
+#define PHY_REG_MASK 0x1F
+
+/* BM/HV Specific Registers */
+#define BM_PORT_CTRL_PAGE 769
+#define BM_PCIE_PAGE 770
+#define BM_WUC_PAGE 800
+#define BM_WUC_ADDRESS_OPCODE 0x11
+#define BM_WUC_DATA_OPCODE 0x12
+#define BM_WUC_ENABLE_PAGE BM_PORT_CTRL_PAGE
+#define BM_WUC_ENABLE_REG 17
+#define BM_WUC_ENABLE_BIT (1 << 2)
+#define BM_WUC_HOST_WU_BIT (1 << 4)
+#define BM_WUC_ME_WU_BIT (1 << 5)
+
+#define PHY_UPPER_SHIFT 21
+#define BM_PHY_REG(page, reg) \
+ (((reg) & MAX_PHY_REG_ADDRESS) |\
+ (((page) & 0xFFFF) << PHY_PAGE_SHIFT) |\
+ (((reg) & ~MAX_PHY_REG_ADDRESS) << (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)))
+#define BM_PHY_REG_PAGE(offset) \
+ ((u16)(((offset) >> PHY_PAGE_SHIFT) & 0xFFFF))
+#define BM_PHY_REG_NUM(offset) \
+ ((u16)(((offset) & MAX_PHY_REG_ADDRESS) |\
+ (((offset) >> (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)) &\
+ ~MAX_PHY_REG_ADDRESS)))
+
+#define HV_INTC_FC_PAGE_START 768
+#define I82578_ADDR_REG 29
+#define I82577_ADDR_REG 16
+#define I82577_CFG_REG 22
+#define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15)
+#define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift 100/10 */
+#define I82577_CTRL_REG 23
+
+/* 82577 specific PHY registers */
+#define I82577_PHY_CTRL_2 18
+#define I82577_PHY_LBK_CTRL 19
+#define I82577_PHY_STATUS_2 26
+#define I82577_PHY_DIAG_STATUS 31
+
+/* I82577 PHY Status 2 */
+#define I82577_PHY_STATUS2_REV_POLARITY 0x0400
+#define I82577_PHY_STATUS2_MDIX 0x0800
+#define I82577_PHY_STATUS2_SPEED_MASK 0x0300
+#define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200
+#define I82577_PHY_STATUS2_SPEED_100MBPS 0x0100
+
+/* I82577 PHY Control 2 */
+#define I82577_PHY_CTRL2_AUTO_MDIX 0x0400
+#define I82577_PHY_CTRL2_FORCE_MDI_MDIX 0x0200
+
+/* I82577 PHY Diagnostics Status */
+#define I82577_DSTATUS_CABLE_LENGTH 0x03FC
+#define I82577_DSTATUS_CABLE_LENGTH_SHIFT 2
+
+/* 82580 PHY Power Management */
+#define E1000_82580_PHY_POWER_MGMT 0xE14
+#define E1000_82580_PM_SPD 0x0001 /* Smart Power Down */
+#define E1000_82580_PM_D0_LPLU 0x0002 /* For D0a states */
+#define E1000_82580_PM_D3_LPLU 0x0004 /* For all other states */
+
+/* BM PHY Copper Specific Control 1 */
+#define BM_CS_CTRL1 16
+#define BM_CS_CTRL1_ENERGY_DETECT 0x0300 /* Enable Energy Detect */
+
+/* BM PHY Copper Specific Status */
+#define BM_CS_STATUS 17
+#define BM_CS_STATUS_ENERGY_DETECT 0x0010 /* Energy Detect Status */
+#define BM_CS_STATUS_LINK_UP 0x0400
+#define BM_CS_STATUS_RESOLVED 0x0800
+#define BM_CS_STATUS_SPEED_MASK 0xC000
+#define BM_CS_STATUS_SPEED_1000 0x8000
+
+/* 82577 Mobile Phy Status Register */
+#define HV_M_STATUS 26
+#define HV_M_STATUS_AUTONEG_COMPLETE 0x1000
+#define HV_M_STATUS_SPEED_MASK 0x0300
+#define HV_M_STATUS_SPEED_1000 0x0200
+#define HV_M_STATUS_LINK_UP 0x0040
+
+#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
+#define IGP01E1000_PHY_POLARITY_MASK 0x0078
+
+#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
+#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */
+
+#define IGP01E1000_PSCFR_SMART_SPEED 0x0080
+
+/* Enable flexible speed on link-up */
+#define IGP01E1000_GMII_FLEX_SPD 0x0010
+#define IGP01E1000_GMII_SPD 0x0020 /* Enable SPD */
+
+#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */
+#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */
+#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */
+
+#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
+
+#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
+#define IGP01E1000_PSSR_MDIX 0x0800
+#define IGP01E1000_PSSR_SPEED_MASK 0xC000
+#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
+
+#define IGP02E1000_PHY_CHANNEL_NUM 4
+#define IGP02E1000_PHY_AGC_A 0x11B1
+#define IGP02E1000_PHY_AGC_B 0x12B1
+#define IGP02E1000_PHY_AGC_C 0x14B1
+#define IGP02E1000_PHY_AGC_D 0x18B1
+
+#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course - 15:13, Fine - 12:9 */
+#define IGP02E1000_AGC_LENGTH_MASK 0x7F
+#define IGP02E1000_AGC_RANGE 15
+
+#define IGP03E1000_PHY_MISC_CTRL 0x1B
+#define IGP03E1000_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Manually Set Duplex */
+
+#define E1000_CABLE_LENGTH_UNDEFINED 0xFF
+
+#define E1000_KMRNCTRLSTA_OFFSET 0x001F0000
+#define E1000_KMRNCTRLSTA_OFFSET_SHIFT 16
+#define E1000_KMRNCTRLSTA_REN 0x00200000
+#define E1000_KMRNCTRLSTA_CTRL_OFFSET 0x1 /* Kumeran Control */
+#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */
+#define E1000_KMRNCTRLSTA_TIMEOUTS 0x4 /* Kumeran Timeouts */
+#define E1000_KMRNCTRLSTA_INBAND_PARAM 0x9 /* Kumeran InBand Parameters */
+#define E1000_KMRNCTRLSTA_IBIST_DISABLE 0x0200 /* Kumeran IBIST Disable */
+#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */
+#define E1000_KMRNCTRLSTA_K1_CONFIG 0x7
+#define E1000_KMRNCTRLSTA_K1_ENABLE 0x0002
+#define E1000_KMRNCTRLSTA_HD_CTRL 0x10 /* Kumeran HD Control */
+
+#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10
+#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Control */
+#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY Special and LED Control */
+#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control */
+
+/* IFE PHY Extended Status Control */
+#define IFE_PESC_POLARITY_REVERSED 0x0100
+
+/* IFE PHY Special Control */
+#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010
+#define IFE_PSC_FORCE_POLARITY 0x0020
+#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100
+
+/* IFE PHY Special Control and LED Control */
+#define IFE_PSCL_PROBE_MODE 0x0020
+#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */
+#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */
+
+/* IFE PHY MDIX Control */
+#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */
+#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDI-X, 0=force MDI */
+#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable auto, 0=disable */
+
+/* SFP modules ID memory locations */
+#define E1000_SFF_IDENTIFIER_OFFSET 0x00
+#define E1000_SFF_IDENTIFIER_SFF 0x02
+#define E1000_SFF_IDENTIFIER_SFP 0x03
+
+#define E1000_SFF_ETH_FLAGS_OFFSET 0x06
+/* Flags for SFP modules compatible with ETH up to 1Gb */
+struct sfp_e1000_flags {
+ u8 e1000_base_sx:1;
+ u8 e1000_base_lx:1;
+ u8 e1000_base_cx:1;
+ u8 e1000_base_t:1;
+ u8 e100_base_lx:1;
+ u8 e100_base_fx:1;
+ u8 e10_base_bx10:1;
+ u8 e10_base_px:1;
+};
+
+/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */
+#define E1000_SFF_VENDOR_OUI_TYCO 0x00407600
+#define E1000_SFF_VENDOR_OUI_FTL 0x00906500
+#define E1000_SFF_VENDOR_OUI_AVAGO 0x00176A00
+#define E1000_SFF_VENDOR_OUI_INTEL 0x001B2100
+
+#endif
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2012 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_REGS_H_
+#define _E1000_REGS_H_
+
+#define E1000_CTRL 0x00000 /* Device Control - RW */
+#define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */
+#define E1000_STATUS 0x00008 /* Device Status - RO */
+#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
+#define E1000_EERD 0x00014 /* EEPROM Read - RW */
+#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
+#define E1000_FLA 0x0001C /* Flash Access - RW */
+#define E1000_MDIC 0x00020 /* MDI Control - RW */
+#define E1000_SCTL 0x00024 /* SerDes Control - RW */
+#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
+#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
+#define E1000_FEXT 0x0002C /* Future Extended - RW */
+#define E1000_FEXTNVM4 0x00024 /* Future Extended NVM 4 - RW */
+#define E1000_FEXTNVM 0x00028 /* Future Extended NVM - RW */
+#define E1000_FCT 0x00030 /* Flow Control Type - RW */
+#define E1000_CONNSW 0x00034 /* Copper/Fiber switch control - RW */
+#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
+#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
+#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
+#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
+#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
+#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
+#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
+#define E1000_IVAR 0x000E4 /* Interrupt Vector Allocation Register - RW */
+#define E1000_SVCR 0x000F0
+#define E1000_SVT 0x000F4
+#define E1000_RCTL 0x00100 /* Rx Control - RW */
+#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
+#define E1000_TXCW 0x00178 /* Tx Configuration Word - RW */
+#define E1000_RXCW 0x00180 /* Rx Configuration Word - RO */
+#define E1000_PBA_ECC 0x01100 /* PBA ECC Register */
+#define E1000_TCTL 0x00400 /* Tx Control - RW */
+#define E1000_TCTL_EXT 0x00404 /* Extended Tx Control - RW */
+#define E1000_TIPG 0x00410 /* Tx Inter-packet gap -RW */
+#define E1000_TBT 0x00448 /* Tx Burst Timer - RW */
+#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
+#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
+#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */
+#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */
+#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */
+#define E1000_POEMB E1000_PHY_CTRL /* PHY OEM Bits */
+#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
+#define E1000_PBS 0x01008 /* Packet Buffer Size */
+#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
+#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */
+#define E1000_FLASHT 0x01028 /* FLASH Timer Register */
+#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
+#define E1000_FLSWCTL 0x01030 /* FLASH control register */
+#define E1000_FLSWDATA 0x01034 /* FLASH data register */
+#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */
+#define E1000_FLOP 0x0103C /* FLASH Opcode Register */
+#define E1000_I2CCMD 0x01028 /* SFPI2C Command Register - RW */
+#define E1000_I2CPARAMS 0x0102C /* SFPI2C Parameters Register - RW */
+#define E1000_WDSTP 0x01040 /* Watchdog Setup - RW */
+#define E1000_SWDSTS 0x01044 /* SW Device Status - RW */
+#define E1000_FRTIMER 0x01048 /* Free Running Timer - RW */
+#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */
+#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
+#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
+#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */
+#define E1000_RDFPCQ(_n) (0x02430 + (0x4 * (_n)))
+#define E1000_PBRTH 0x02458 /* PB Rx Arbitration Threshold - RW */
+#define E1000_FCRTV 0x02460 /* Flow Control Refresh Timer Value - RW */
+/* Split and Replication Rx Control - RW */
+#define E1000_RDPUMB 0x025CC /* DMA Rx Descriptor uC Mailbox - RW */
+#define E1000_RDPUAD 0x025D0 /* DMA Rx Descriptor uC Addr Command - RW */
+#define E1000_RDPUWD 0x025D4 /* DMA Rx Descriptor uC Data Write - RW */
+#define E1000_RDPURD 0x025D8 /* DMA Rx Descriptor uC Data Read - RW */
+#define E1000_RDPUCTL 0x025DC /* DMA Rx Descriptor uC Control - RW */
+#define E1000_RDTR 0x02820 /* Rx Delay Timer - RW */
+#define E1000_RADV 0x0282C /* Rx Interrupt Absolute Delay Timer - RW */
+/*
+ * Convenience macros
+ *
+ * Note: "_n" is the queue number of the register to be written to.
+ *
+ * Example usage:
+ * E1000_RDBAL_REG(current_rx_queue)
+ */
+#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : \
+ (0x0C000 + ((_n) * 0x40)))
+#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : \
+ (0x0C004 + ((_n) * 0x40)))
+#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : \
+ (0x0C008 + ((_n) * 0x40)))
+#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) : \
+ (0x0C00C + ((_n) * 0x40)))
+#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : \
+ (0x0C010 + ((_n) * 0x40)))
+#define E1000_RXCTL(_n) ((_n) < 4 ? (0x02814 + ((_n) * 0x100)) : \
+ (0x0C014 + ((_n) * 0x40)))
+#define E1000_DCA_RXCTRL(_n) E1000_RXCTL(_n)
+#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : \
+ (0x0C018 + ((_n) * 0x40)))
+#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : \
+ (0x0C028 + ((_n) * 0x40)))
+#define E1000_RQDPC(_n) ((_n) < 4 ? (0x02830 + ((_n) * 0x100)) : \
+ (0x0C030 + ((_n) * 0x40)))
+#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : \
+ (0x0E000 + ((_n) * 0x40)))
+#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : \
+ (0x0E004 + ((_n) * 0x40)))
+#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : \
+ (0x0E008 + ((_n) * 0x40)))
+#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : \
+ (0x0E010 + ((_n) * 0x40)))
+#define E1000_TXCTL(_n) ((_n) < 4 ? (0x03814 + ((_n) * 0x100)) : \
+ (0x0E014 + ((_n) * 0x40)))
+#define E1000_DCA_TXCTRL(_n) E1000_TXCTL(_n)
+#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : \
+ (0x0E018 + ((_n) * 0x40)))
+#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : \
+ (0x0E028 + ((_n) * 0x40)))
+#define E1000_TDWBAL(_n) ((_n) < 4 ? (0x03838 + ((_n) * 0x100)) : \
+ (0x0E038 + ((_n) * 0x40)))
+#define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) : \
+ (0x0E03C + ((_n) * 0x40)))
+#define E1000_TARC(_n) (0x03840 + ((_n) * 0x100))
+#define E1000_RSRPD 0x02C00 /* Rx Small Packet Detect - RW */
+#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */
+#define E1000_TXDMAC 0x03000 /* Tx DMA Control - RW */
+#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */
+#define E1000_PSRTYPE(_i) (0x05480 + ((_i) * 4))
+#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
+ (0x054E0 + ((_i - 16) * 8)))
+#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
+ (0x054E4 + ((_i - 16) * 8)))
+#define E1000_SHRAL(_i) (0x05438 + ((_i) * 8))
+#define E1000_SHRAH(_i) (0x0543C + ((_i) * 8))
+#define E1000_IP4AT_REG(_i) (0x05840 + ((_i) * 8))
+#define E1000_IP6AT_REG(_i) (0x05880 + ((_i) * 4))
+#define E1000_WUPM_REG(_i) (0x05A00 + ((_i) * 4))
+#define E1000_FFMT_REG(_i) (0x09000 + ((_i) * 8))
+#define E1000_FFVT_REG(_i) (0x09800 + ((_i) * 8))
+#define E1000_FFLT_REG(_i) (0x05F00 + ((_i) * 8))
+#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */
+#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */
+#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */
+#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */
+#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */
+#define E1000_TDPUMB 0x0357C /* DMA Tx Desc uC Mail Box - RW */
+#define E1000_TDPUAD 0x03580 /* DMA Tx Desc uC Addr Command - RW */
+#define E1000_TDPUWD 0x03584 /* DMA Tx Desc uC Data Write - RW */
+#define E1000_TDPURD 0x03588 /* DMA Tx Desc uC Data Read - RW */
+#define E1000_TDPUCTL 0x0358C /* DMA Tx Desc uC Control - RW */
+#define E1000_DTXCTL 0x03590 /* DMA Tx Control - RW */
+#define E1000_TIDV 0x03820 /* Tx Interrupt Delay Value - RW */
+#define E1000_TADV 0x0382C /* Tx Interrupt Absolute Delay Val - RW */
+#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */
+#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */
+#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */
+#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */
+#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */
+#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */
+#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */
+#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */
+#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */
+#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */
+#define E1000_COLC 0x04028 /* Collision Count - R/clr */
+#define E1000_DC 0x04030 /* Defer Count - R/clr */
+#define E1000_TNCRS 0x04034 /* Tx-No CRS - R/clr */
+#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */
+#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */
+#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */
+#define E1000_XONRXC 0x04048 /* XON Rx Count - R/clr */
+#define E1000_XONTXC 0x0404C /* XON Tx Count - R/clr */
+#define E1000_XOFFRXC 0x04050 /* XOFF Rx Count - R/clr */
+#define E1000_XOFFTXC 0x04054 /* XOFF Tx Count - R/clr */
+#define E1000_FCRUC 0x04058 /* Flow Control Rx Unsupported Count- R/clr */
+#define E1000_PRC64 0x0405C /* Packets Rx (64 bytes) - R/clr */
+#define E1000_PRC127 0x04060 /* Packets Rx (65-127 bytes) - R/clr */
+#define E1000_PRC255 0x04064 /* Packets Rx (128-255 bytes) - R/clr */
+#define E1000_PRC511 0x04068 /* Packets Rx (255-511 bytes) - R/clr */
+#define E1000_PRC1023 0x0406C /* Packets Rx (512-1023 bytes) - R/clr */
+#define E1000_PRC1522 0x04070 /* Packets Rx (1024-1522 bytes) - R/clr */
+#define E1000_GPRC 0x04074 /* Good Packets Rx Count - R/clr */
+#define E1000_BPRC 0x04078 /* Broadcast Packets Rx Count - R/clr */
+#define E1000_MPRC 0x0407C /* Multicast Packets Rx Count - R/clr */
+#define E1000_GPTC 0x04080 /* Good Packets Tx Count - R/clr */
+#define E1000_GORCL 0x04088 /* Good Octets Rx Count Low - R/clr */
+#define E1000_GORCH 0x0408C /* Good Octets Rx Count High - R/clr */
+#define E1000_GOTCL 0x04090 /* Good Octets Tx Count Low - R/clr */
+#define E1000_GOTCH 0x04094 /* Good Octets Tx Count High - R/clr */
+#define E1000_RNBC 0x040A0 /* Rx No Buffers Count - R/clr */
+#define E1000_RUC 0x040A4 /* Rx Undersize Count - R/clr */
+#define E1000_RFC 0x040A8 /* Rx Fragment Count - R/clr */
+#define E1000_ROC 0x040AC /* Rx Oversize Count - R/clr */
+#define E1000_RJC 0x040B0 /* Rx Jabber Count - R/clr */
+#define E1000_MGTPRC 0x040B4 /* Management Packets Rx Count - R/clr */
+#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */
+#define E1000_MGTPTC 0x040BC /* Management Packets Tx Count - R/clr */
+#define E1000_TORL 0x040C0 /* Total Octets Rx Low - R/clr */
+#define E1000_TORH 0x040C4 /* Total Octets Rx High - R/clr */
+#define E1000_TOTL 0x040C8 /* Total Octets Tx Low - R/clr */
+#define E1000_TOTH 0x040CC /* Total Octets Tx High - R/clr */
+#define E1000_TPR 0x040D0 /* Total Packets Rx - R/clr */
+#define E1000_TPT 0x040D4 /* Total Packets Tx - R/clr */
+#define E1000_PTC64 0x040D8 /* Packets Tx (64 bytes) - R/clr */
+#define E1000_PTC127 0x040DC /* Packets Tx (65-127 bytes) - R/clr */
+#define E1000_PTC255 0x040E0 /* Packets Tx (128-255 bytes) - R/clr */
+#define E1000_PTC511 0x040E4 /* Packets Tx (256-511 bytes) - R/clr */
+#define E1000_PTC1023 0x040E8 /* Packets Tx (512-1023 bytes) - R/clr */
+#define E1000_PTC1522 0x040EC /* Packets Tx (1024-1522 Bytes) - R/clr */
+#define E1000_MPTC 0x040F0 /* Multicast Packets Tx Count - R/clr */
+#define E1000_BPTC 0x040F4 /* Broadcast Packets Tx Count - R/clr */
+#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context Tx - R/clr */
+#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context Tx Fail - R/clr */
+#define E1000_IAC 0x04100 /* Interrupt Assertion Count */
+#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Pkt Timer Expire Count */
+#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Abs Timer Expire Count */
+#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Pkt Timer Expire Count */
+#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Abs Timer Expire Count */
+#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */
+#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Min Thresh Count */
+#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Desc Min Thresh Count */
+#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
+#define E1000_CRC_OFFSET 0x05F50 /* CRC Offset register */
+
+#define E1000_PCS_CFG0 0x04200 /* PCS Configuration 0 - RW */
+#define E1000_PCS_LCTL 0x04208 /* PCS Link Control - RW */
+#define E1000_PCS_LSTAT 0x0420C /* PCS Link Status - RO */
+#define E1000_CBTMPC 0x0402C /* Circuit Breaker Tx Packet Count */
+#define E1000_HTDPMC 0x0403C /* Host Transmit Discarded Packets */
+#define E1000_CBRDPC 0x04044 /* Circuit Breaker Rx Dropped Count */
+#define E1000_CBRMPC 0x040FC /* Circuit Breaker Rx Packet Count */
+#define E1000_RPTHC 0x04104 /* Rx Packets To Host */
+#define E1000_HGPTC 0x04118 /* Host Good Packets Tx Count */
+#define E1000_HTCBDPC 0x04124 /* Host Tx Circuit Breaker Dropped Count */
+#define E1000_HGORCL 0x04128 /* Host Good Octets Received Count Low */
+#define E1000_HGORCH 0x0412C /* Host Good Octets Received Count High */
+#define E1000_HGOTCL 0x04130 /* Host Good Octets Transmit Count Low */
+#define E1000_HGOTCH 0x04134 /* Host Good Octets Transmit Count High */
+#define E1000_LENERRS 0x04138 /* Length Errors Count */
+#define E1000_SCVPC 0x04228 /* SerDes/SGMII Code Violation Pkt Count */
+#define E1000_HRMPC 0x0A018 /* Header Redirection Missed Packet Count */
+#define E1000_PCS_ANADV 0x04218 /* AN advertisement - RW */
+#define E1000_PCS_LPAB 0x0421C /* Link Partner Ability - RW */
+#define E1000_PCS_NPTX 0x04220 /* AN Next Page Transmit - RW */
+#define E1000_PCS_LPABNP 0x04224 /* Link Partner Ability Next Pg - RW */
+#define E1000_1GSTAT_RCV 0x04228 /* 1GSTAT Code Violation Pkt Cnt - RW */
+#define E1000_RXCSUM 0x05000 /* Rx Checksum Control - RW */
+#define E1000_RLPML 0x05004 /* Rx Long Packet Max Length */
+#define E1000_RFCTL 0x05008 /* Receive Filter Control */
+#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
+#define E1000_RA 0x05400 /* Receive Address - RW Array */
+#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
+#define E1000_VT_CTL 0x0581C /* VMDq Control - RW */
+#define E1000_CIAA 0x05B88 /* Config Indirect Access Address - RW */
+#define E1000_CIAD 0x05B8C /* Config Indirect Access Data - RW */
+#define E1000_VFQA0 0x0B000 /* VLAN Filter Queue Array 0 - RW Array */
+#define E1000_VFQA1 0x0B200 /* VLAN Filter Queue Array 1 - RW Array */
+#define E1000_WUC 0x05800 /* Wakeup Control - RW */
+#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */
+#define E1000_WUS 0x05810 /* Wakeup Status - RO */
+#define E1000_MANC 0x05820 /* Management Control - RW */
+#define E1000_IPAV 0x05838 /* IP Address Valid - RW */
+#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */
+#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */
+#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
+#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */
+#define E1000_PBACL 0x05B68 /* MSIx PBA Clear - Read/Write 1's to clear */
+#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */
+#define E1000_HOST_IF 0x08800 /* Host Interface */
+#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */
+#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */
+
+#define E1000_KMRNCTRLSTA 0x00034 /* MAC-PHY interface - RW */
+#define E1000_MDPHYA 0x0003C /* PHY address - RW */
+#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */
+/* Management Decision Filters */
+#define E1000_MDEF(_n) (0x05890 + (4 * (_n)))
+#define E1000_SW_FW_SYNC 0x05B5C /* SW-FW Synchronization - RW */
+#define E1000_CCMCTL 0x05B48 /* CCM Control Register */
+#define E1000_GIOCTL 0x05B44 /* GIO Analog Control Register */
+#define E1000_SCCTL 0x05B4C /* PCIc PLL Configuration Register */
+#define E1000_GCR 0x05B00 /* PCI-Ex Control */
+#define E1000_GCR2 0x05B64 /* PCI-Ex Control #2 */
+#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */
+#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */
+#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */
+#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */
+#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
+#define E1000_SWSM 0x05B50 /* SW Semaphore */
+#define E1000_FWSM 0x05B54 /* FW Semaphore */
+/* Driver-only SW semaphore (not used by BOOT agents) */
+#define E1000_SWSM2 0x05B58
+#define E1000_DCA_ID 0x05B70 /* DCA Requester ID Information - RO */
+#define E1000_DCA_CTRL 0x05B74 /* DCA Control - RW */
+#define E1000_FFLT_DBG 0x05F04 /* Debug Register */
+#define E1000_HICR 0x08F00 /* Host Interface Control */
+
+/* RSS registers */
+#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */
+#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
+#define E1000_IMIR(_i) (0x05A80 + ((_i) * 4)) /* Immediate Interrupt */
+#define E1000_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* Immediate INTR Ext */
+#define E1000_IMIRVP 0x05AC0 /* Immediate INT Rx VLAN Priority -RW */
+#define E1000_MSIXBM(_i) (0x01600 + ((_i) * 4)) /* MSI-X Alloc Reg -RW */
+/* MSI-X Table entry addr low reg - RW */
+#define E1000_MSIXTADD(_i) (0x0C000 + ((_i) * 0x10))
+/* MSI-X Table entry addr upper reg - RW */
+#define E1000_MSIXTUADD(_i) (0x0C004 + ((_i) * 0x10))
+/* MSI-X Table entry message reg - RW */
+#define E1000_MSIXTMSG(_i) (0x0C008 + ((_i) * 0x10))
+/* MSI-X Table entry vector ctrl reg - RW */
+#define E1000_MSIXVCTRL(_i) (0x0C00C + ((_i) * 0x10))
+#define E1000_MSIXPBA 0x0E000 /* MSI-X Pending bit array */
+#define E1000_RETA(_i) (0x05C00 + ((_i) * 4)) /* Redirection Table - RW */
+#define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW */
+#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */
+#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */
+#define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */
+#define E1000_TSYNCTXCTL 0x0B614 /* Tx Time Sync Control register - RW */
+#define E1000_TSYNCRXCFG 0x05F50 /* Time Sync Rx Configuration - RW */
+#define E1000_RXSTMPL 0x0B624 /* Rx timestamp Low - RO */
+#define E1000_RXSTMPH 0x0B628 /* Rx timestamp High - RO */
+#define E1000_RXSATRL 0x0B62C /* Rx timestamp attribute low - RO */
+#define E1000_RXSATRH 0x0B630 /* Rx timestamp attribute high - RO */
+#define E1000_TXSTMPL 0x0B618 /* Tx timestamp value Low - RO */
+#define E1000_TXSTMPH 0x0B61C /* Tx timestamp value High - RO */
+#define E1000_SYSTIML 0x0B600 /* System time register Low - RO */
+#define E1000_SYSTIMH 0x0B604 /* System time register High - RO */
+#define E1000_TIMINCA 0x0B608 /* Increment attributes register - RW */
+#define E1000_RXMTRL 0x0B634 /* Time sync Rx EtherType and Msg Type - RW */
+#define E1000_RXUDP 0x0B638 /* Time Sync Rx UDP Port - RW */
+
+#endif
projects / users / jedix / linux-maple.git / commitdiff