spi: stm32: fix stm32_spi_prepare_mbr() that halves spi clk for every run

When this driver is used with a driver that uses preallocated spi_transfer
structs. The speed_hz is halved by every run. This results in:

spi_stm32 44004000.spi: SPI transfer setup failed
ads7846 spi0.0: SPI transfer failed: -22

Example when running with DIV_ROUND_UP():
- First run; speed_hz = 1000000, spi->clk_rate 125000000
  div 125 -> mbrdiv = 7, cur_speed = 976562
- Second run; speed_hz = 976562
  div 128,00007 (roundup to 129) -> mbrdiv = 8, cur_speed = 488281
- Third run; speed_hz = 488281
  div 256,000131072067109 (roundup to 257) and then -EINVAL is returned.

Use DIV_ROUND_CLOSEST to allow to round down and allow us to keep the
set speed.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20221103080043.3033414-1-sean@geanix.com
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 3c2fa2e2f94a39295048f88af145e8557cb8d3a6..def09cf0dc147c2987789d975976ca6ecc45f1da 100644 (file)
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -434,7 +434,7 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz,
        u32 div, mbrdiv;
 
        /* Ensure spi->clk_rate is even */
-       div = DIV_ROUND_UP(spi->clk_rate & ~0x1, speed_hz);
+       div = DIV_ROUND_CLOSEST(spi->clk_rate & ~0x1, speed_hz);
 
        /*
         * SPI framework set xfer->speed_hz to master->max_speed_hz if