ARM: imx27: Use 'AITC' for the interrupt controller name

On the MX27 Reference Manual the interrupt controller is named AITC:
ARM926EJ-S Interrupt Controller

So use the AITC term instead of AVIC.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Origin: id:1334193132-18944-2-git-send-email-festevam@gmail.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 86b6f5fd545492f6f7a0b1eb86a61a03554f1056..36836eefe24dedb865457219317b8e520523d6ce 100644 (file)
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -32,8 +32,8 @@
                spi2 = &cspi3;
        };
 
-       avic: avic-interrupt-controller@e0000000 {
-               compatible = "fsl,imx27-avic", "fsl,avic";
+       aitc: aitc-interrupt-controller@e0000000 {
+               compatible = "fsl,imx27-aitc", "fsl,avic";
                interrupt-controller;
                #interrupt-cells = <1>;
                reg = <0x10040000 0x1000>;
@@ -53,7 +53,7 @@
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "simple-bus";
-               interrupt-parent = <&avic>;
+               interrupt-parent = <&aitc>;
                ranges;
 
                aipi@10000000 { /* AIPI1 */