--- /dev/null
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <linux/serial_reg.h>
+
+#define UART_TX_OFS (UART_TX << CONFIG_MIPS_CPS_NS16550_SHIFT)
+#define UART_LSR_OFS (UART_LSR << CONFIG_MIPS_CPS_NS16550_SHIFT)
+
+/**
+ * _mips_cps_putc() - write a character to the UART
+ * @a0: ASCII character to write
+ * @t9: UART base address
+ */
+LEAF(_mips_cps_putc)
+1: lw t0, UART_LSR_OFS(t9)
+ andi t0, t0, UART_LSR_TEMT
+ beqz t0, 1b
+ sb a0, UART_TX_OFS(t9)
+ jr ra
+ END(_mips_cps_putc)
+
+/**
+ * _mips_cps_puts() - write a string to the UART
+ * @a0: pointer to NULL-terminated ASCII string
+ * @t9: UART base address
+ *
+ * Write a null-terminated ASCII string to the UART.
+ */
+NESTED(_mips_cps_puts, 0, ra)
+ move s7, ra
+ move s6, a0
+
+1: lb a0, 0(s6)
+ beqz a0, 2f
+ jal _mips_cps_putc
+ PTR_ADDIU s6, s6, 1
+ b 1b
+
+2: jr s7
+ END(_mips_cps_puts)
+
+/**
+ * _mips_cps_putx4 - write a 4b hex value to the UART
+ * @a0: the 4b value to write to the UART
+ * @t9: UART base address
+ *
+ * Write a single hexadecimal character to the UART.
+ */
+NESTED(_mips_cps_putx4, 0, ra)
+ andi a0, a0, 0xf
+ li t0, '0'
+ blt a0, 10, 1f
+ li t0, 'a'
+ addiu a0, a0, -10
+1: addu a0, a0, t0
+ b _mips_cps_putc
+ END(_mips_cps_putx4)
+
+/**
+ * _mips_cps_putx8 - write an 8b hex value to the UART
+ * @a0: the 8b value to write to the UART
+ * @t9: UART base address
+ *
+ * Write an 8 bit value (ie. 2 hexadecimal characters) to the UART.
+ */
+NESTED(_mips_cps_putx8, 0, ra)
+ move s3, ra
+ move s2, a0
+ srl a0, a0, 4
+ jal _mips_cps_putx4
+ move a0, s2
+ move ra, s3
+ b _mips_cps_putx4
+ END(_mips_cps_putx8)
+
+/**
+ * _mips_cps_putx16 - write a 16b hex value to the UART
+ * @a0: the 16b value to write to the UART
+ * @t9: UART base address
+ *
+ * Write a 16 bit value (ie. 4 hexadecimal characters) to the UART.
+ */
+NESTED(_mips_cps_putx16, 0, ra)
+ move s5, ra
+ move s4, a0
+ srl a0, a0, 8
+ jal _mips_cps_putx8
+ move a0, s4
+ move ra, s5
+ b _mips_cps_putx8
+ END(_mips_cps_putx16)
+
+/**
+ * _mips_cps_putx32 - write a 32b hex value to the UART
+ * @a0: the 32b value to write to the UART
+ * @t9: UART base address
+ *
+ * Write a 32 bit value (ie. 8 hexadecimal characters) to the UART.
+ */
+NESTED(_mips_cps_putx32, 0, ra)
+ move s7, ra
+ move s6, a0
+ srl a0, a0, 16
+ jal _mips_cps_putx16
+ move a0, s6
+ move ra, s7
+ b _mips_cps_putx16
+ END(_mips_cps_putx32)
+
+#ifdef CONFIG_64BIT
+
+/**
+ * _mips_cps_putx64 - write a 64b hex value to the UART
+ * @a0: the 64b value to write to the UART
+ * @t9: UART base address
+ *
+ * Write a 64 bit value (ie. 16 hexadecimal characters) to the UART.
+ */
+NESTED(_mips_cps_putx64, 0, ra)
+ move sp, ra
+ move s8, a0
+ dsrl32 a0, a0, 0
+ jal _mips_cps_putx32
+ move a0, s8
+ move ra, sp
+ b _mips_cps_putx32
+ END(_mips_cps_putx64)
+
+#define _mips_cps_putxlong _mips_cps_putx64
+
+#else /* !CONFIG_64BIT */
+
+#define _mips_cps_putxlong _mips_cps_putx32
+
+#endif /* !CONFIG_64BIT */
+
+/**
+ * mips_cps_bev_dump() - dump relevant exception state to UART
+ * @a0: pointer to NULL-terminated ASCII string naming the exception
+ *
+ * Write information that may be useful in debugging an exception to the
+ * UART configured by CONFIG_MIPS_CPS_NS16550_*. As this BEV exception
+ * will only be run if something goes horribly wrong very early during
+ * the bringup of a core and it is very likely to be unsafe to perform
+ * memory accesses at that point (cache state indeterminate, EVA may not
+ * be configured, coherence may be disabled) let alone have a stack,
+ * this is all written in assembly using only registers & unmapped
+ * uncached access to the UART registers.
+ */
+LEAF(mips_cps_bev_dump)
+ move s0, ra
+ move s1, a0
+
+ li t9, CKSEG1ADDR(CONFIG_MIPS_CPS_NS16550_BASE)
+
+ PTR_LA a0, str_newline
+ jal _mips_cps_puts
+ PTR_LA a0, str_bev
+ jal _mips_cps_puts
+ move a0, s1
+ jal _mips_cps_puts
+ PTR_LA a0, str_newline
+ jal _mips_cps_puts
+ PTR_LA a0, str_newline
+ jal _mips_cps_puts
+
+#define DUMP_COP0_REG(reg, name, sz, _mfc0) \
+ PTR_LA a0, 8f; \
+ jal _mips_cps_puts; \
+ _mfc0 a0, reg; \
+ jal _mips_cps_putx##sz; \
+ PTR_LA a0, str_newline; \
+ jal _mips_cps_puts; \
+ TEXT(name)
+
+ DUMP_COP0_REG(CP0_CAUSE, "Cause: 0x", 32, mfc0)
+ DUMP_COP0_REG(CP0_STATUS, "Status: 0x", 32, mfc0)
+ DUMP_COP0_REG(CP0_EBASE, "EBase: 0x", long, MFC0)
+ DUMP_COP0_REG(CP0_BADVADDR, "BadVAddr: 0x", long, MFC0)
+ DUMP_COP0_REG(CP0_BADINSTR, "BadInstr: 0x", 32, mfc0)
+
+ PTR_LA a0, str_newline
+ jal _mips_cps_puts
+ jr s0
+ END(mips_cps_bev_dump)
+
+.pushsection .data
+str_bev: .asciiz "BEV Exception: "
+str_newline: .asciiz "\r\n"
+.popsection
projects / users / dwmw2 / linux.git / commitdiff