Set up your spi devices with the right board-specific platform data,
          if you want to specify device partitioning.
 
+config MTD_BCM47XXSFLASH
+       tristate "R/O support for serial flash on BCMA bus"
+       depends on BCMA_SFLASH
+       help
+         BCMA bus can have various flash memories attached, they are
+         registered by bcma as platform devices. This enables driver for
+         serial flash memories (only read-only mode is implemented).
+
 config MTD_SLRAM
        tristate "Uncached system RAM"
        help
 
--- /dev/null
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/platform_device.h>
+#include <linux/bcma/bcma.h>
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Serial flash driver for BCMA bus");
+
+static const char *probes[] = { "bcm47xxpart", NULL };
+
+static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len,
+                             size_t *retlen, u_char *buf)
+{
+       struct bcma_sflash *sflash = mtd->priv;
+
+       /* Check address range */
+       if ((from + len) > mtd->size)
+               return -EINVAL;
+
+       memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(sflash->window + from),
+                     len);
+
+       return len;
+}
+
+static void bcm47xxsflash_fill_mtd(struct bcma_sflash *sflash,
+                                  struct mtd_info *mtd)
+{
+       mtd->priv = sflash;
+       mtd->name = "bcm47xxsflash";
+       mtd->owner = THIS_MODULE;
+       mtd->type = MTD_ROM;
+       mtd->size = sflash->size;
+       mtd->_read = bcm47xxsflash_read;
+
+       /* TODO: implement writing support and verify/change following code */
+       mtd->flags = MTD_CAP_ROM;
+       mtd->writebufsize = mtd->writesize = 1;
+}
+
+static int bcm47xxsflash_probe(struct platform_device *pdev)
+{
+       struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
+       int err;
+
+       sflash->mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
+       if (!sflash->mtd) {
+               err = -ENOMEM;
+               goto out;
+       }
+       bcm47xxsflash_fill_mtd(sflash, sflash->mtd);
+
+       err = mtd_device_parse_register(sflash->mtd, probes, NULL, NULL, 0);
+       if (err) {
+               pr_err("Failed to register MTD device: %d\n", err);
+               goto err_dev_reg;
+       }
+
+       return 0;
+
+err_dev_reg:
+       kfree(sflash->mtd);
+out:
+       return err;
+}
+
+static int __devexit bcm47xxsflash_remove(struct platform_device *pdev)
+{
+       struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
+
+       mtd_device_unregister(sflash->mtd);
+       kfree(sflash->mtd);
+
+       return 0;
+}
+
+static struct platform_driver bcma_sflash_driver = {
+       .remove = __devexit_p(bcm47xxsflash_remove),
+       .driver = {
+               .name = "bcma_sflash",
+               .owner = THIS_MODULE,
+       },
+};
+
+static int __init bcm47xxsflash_init(void)
+{
+       int err;
+
+       err = platform_driver_probe(&bcma_sflash_driver, bcm47xxsflash_probe);
+       if (err)
+               pr_err("Failed to register BCMA serial flash driver: %d\n",
+                      err);
+
+       return err;
+}
+
+static void __exit bcm47xxsflash_exit(void)
+{
+       platform_driver_unregister(&bcma_sflash_driver);
+}
+
+module_init(bcm47xxsflash_init);
+module_exit(bcm47xxsflash_exit);