arm64: dts: add support for S6 based Amlogic BL209

Amlogic S6 is an advanced application processor designed for
hybrid OTT/IP Set Top Box and high-end media box applications.

Add basic support for the S6 based Amlogic BL209 board, which describes
the following components: CPU, GIC, IRQ, Timer and UART.
These are capable of booting up into the serial console.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20250317-s6-s7-basic-v1-5-d653384e41f3@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 2fbda8419c65a3056410ac45ca3ddaceb69ea4f5..a1ad8fa9999f2da70264a7d7e904f5e681cae9ce 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-a5-a113x2-av400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c308l-aw419.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-s6-s905x5-bl209.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s6-s905x5-bl209.dts b/arch/arm64/boot/dts/amlogic/amlogic-s6-s905x5-bl209.dts
new file mode 100644 (file)
index 0000000..c45b226
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s6-s905x5-bl209.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-s6.dtsi"
+/ {
+       model = "Amlogic S905X5 BL209 Development Board";
+       compatible = "amlogic,bl209", "amlogic,s6";
+       interrupt-parent = <&gic>;
+       #address-cells = <2>;
+       #size-cells = <2>;
+
+       aliases {
+               serial0 = &uart_b;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x000000 0x0 0xe0000000>,
+                     <0x1 0x000000 0x0 0x20000000>;
+       };
+
+       reserved-memory {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges;
+
+               /* 27 MiB reserved for ARM Trusted Firmware */
+               secmon_reserved: secmon@5000000 {
+                       compatible = "shared-dma-pool";
+                       reg = <0x0 0x05000000 0x0 0x1b00000>;
+                       no-map;
+               };
+       };
+};
+
+&uart_b {
+       status = "okay";
+};

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi
new file mode 100644 (file)
index 0000000..a8c9024
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+/ {
+       cpus {
+               #address-cells = <2>;
+               #size-cells = <0>;
+
+               cpu0: cpu@0 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a510";
+                       reg = <0x0 0x0>;
+                       enable-method = "psci";
+               };
+
+               cpu1: cpu@100 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a510";
+                       reg = <0x0 0x100>;
+                       enable-method = "psci";
+               };
+
+               cpu2: cpu@200 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a510";
+                       reg = <0x0 0x200>;
+                       enable-method = "psci";
+               };
+
+               cpu3: cpu@300 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a510";
+                       reg = <0x0 0x300>;
+                       enable-method = "psci";
+               };
+       };
+
+       timer {
+               compatible = "arm,armv8-timer";
+               interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+       };
+
+       psci {
+               compatible = "arm,psci-1.0";
+               method = "smc";
+       };
+
+       xtal: xtal-clk {
+               compatible = "fixed-clock";
+               clock-frequency = <24000000>;
+               clock-output-names = "xtal";
+               #clock-cells = <0>;
+       };
+
+       soc {
+               compatible = "simple-bus";
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges;
+
+               gic: interrupt-controller@ff200000 {
+                       compatible = "arm,gic-v3";
+                       #interrupt-cells = <3>;
+                       #address-cells = <0>;
+                       interrupt-controller;
+                       reg = <0x0 0xff200000 0 0x10000>,
+                             <0x0 0xff240000 0 0x80000>;
+                       interrupts = <GIC_PPI 9 0xf04>;
+               };
+
+               apb: bus@fe000000 {
+                       compatible = "simple-bus";
+                       reg = <0x0 0xfe000000 0x0 0x480000>;
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+                       uart_b: serial@7a000 {
+                               compatible = "amlogic,s6-uart",
+                                            "amlogic,meson-s4-uart";
+                               reg = <0x0 0x7a000 0x0 0x18>;
+                               interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+                               clocks = <&xtal>, <&xtal>, <&xtal>;
+                               clock-names = "xtal", "pclk", "baud";
+                               status = "disabled";
+                       };
+               };
+       };
+};