net: dsa: bcm_sf2: Fix IMP setup for port different than 8

Since it became possible for the DSA core to use a CPU port different
than 8, our bcm_sf2_imp_setup() function was broken because it assumes
that registers are applicable to port 8. In particular, the port's MAC
is going to stay disabled, so make sure we clear the RX_DIS and TX_DIS
bits if we are not configured for port 8.

Fixes: 9f91484f6fcc ("net: dsa: make "label" property optional for dsa2")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 26509fa37a50b4d4137adfef9878ac969464da18..d44651ad520c10d7e21d5f7793baab248e389b7c 100644 (file)
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -37,22 +37,11 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
        unsigned int i;
        u32 reg, offset;
 
-       if (priv->type == BCM7445_DEVICE_ID)
-               offset = CORE_STS_OVERRIDE_IMP;
-       else
-               offset = CORE_STS_OVERRIDE_IMP2;
-
        /* Enable the port memories */
        reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
        reg &= ~P_TXQ_PSM_VDD(port);
        core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
 
-       /* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
-       reg = core_readl(priv, CORE_IMP_CTL);
-       reg |= (RX_BCST_EN | RX_MCST_EN | RX_UCST_EN);
-       reg &= ~(RX_DIS | TX_DIS);
-       core_writel(priv, reg, CORE_IMP_CTL);
-
        /* Enable forwarding */
        core_writel(priv, SW_FWDG_EN, CORE_SWMODE);
 
@@ -71,10 +60,27 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
 
        b53_brcm_hdr_setup(ds, port);
 
-       /* Force link status for IMP port */
-       reg = core_readl(priv, offset);
-       reg |= (MII_SW_OR | LINK_STS);
-       core_writel(priv, reg, offset);
+       if (port == 8) {
+               if (priv->type == BCM7445_DEVICE_ID)
+                       offset = CORE_STS_OVERRIDE_IMP;
+               else
+                       offset = CORE_STS_OVERRIDE_IMP2;
+
+               /* Force link status for IMP port */
+               reg = core_readl(priv, offset);
+               reg |= (MII_SW_OR | LINK_STS);
+               core_writel(priv, reg, offset);
+
+               /* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
+               reg = core_readl(priv, CORE_IMP_CTL);
+               reg |= (RX_BCST_EN | RX_MCST_EN | RX_UCST_EN);
+               reg &= ~(RX_DIS | TX_DIS);
+               core_writel(priv, reg, CORE_IMP_CTL);
+       } else {
+               reg = core_readl(priv, CORE_G_PCTL_PORT(port));
+               reg &= ~(RX_DIS | TX_DIS);
+               core_writel(priv, reg, CORE_G_PCTL_PORT(port));
+       }
 }
 
 static void bcm_sf2_gphy_enable_set(struct dsa_switch *ds, bool enable)