configure.ac: show vdebug in the config summary

Also enable this adapter by default (auto).

Change-Id: Id011168b93c4cdc602ab78eabfb9a64ca8d8a7df
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8601
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins

diff --git a/configure.ac b/configure.ac
index 4b10aabd5d779736de3facfc2d52f95062af9a79..fda0b2a3603a2afde578e7d81339a699dcd112ea 100644 (file)
--- a/configure.ac
+++ b/configure.ac
@@ -172,6 +172,8 @@ m4_define([SERIAL_PORT_ADAPTERS],
 
 m4_define([LINUXSPIDEV_ADAPTER],
        [[[linuxspidev], [Linux spidev driver], [LINUXSPIDEV]]])
+m4_define([VDEBUG_ADAPTER],
+       [[[vdebug], [Cadence Virtual Debug Interface], [VDEBUG]]])
 
 # The word 'Adapter' in "Dummy Adapter" below must begin with a capital letter
 # because there is an M4 macro called 'adapter'.
@@ -302,6 +304,7 @@ AC_ARG_ADAPTERS([
   LINUXSPIDEV_ADAPTER,
   SERIAL_PORT_ADAPTERS,
   DUMMY_ADAPTER,
+  VDEBUG_ADAPTER,
   PCIE_ADAPTERS,
   LIBJAYLINK_ADAPTERS
   ],[auto])
@@ -324,10 +327,6 @@ AC_ARG_ENABLE([jtag_vpi],
   AS_HELP_STRING([--enable-jtag_vpi], [Enable building support for JTAG VPI]),
   [build_jtag_vpi=$enableval], [build_jtag_vpi=no])
 
-AC_ARG_ENABLE([vdebug],
-  AS_HELP_STRING([--enable-vdebug], [Enable building support for Cadence Virtual Debug Interface]),
-  [build_vdebug=$enableval], [build_vdebug=no])
-
 AC_ARG_ENABLE([jtag_dpi],
   AS_HELP_STRING([--enable-jtag_dpi], [Enable building support for JTAG DPI]),
   [build_jtag_dpi=$enableval], [build_jtag_dpi=no])
@@ -581,12 +580,6 @@ AS_IF([test "x$build_jtag_vpi" = "xyes"], [
   AC_DEFINE([BUILD_JTAG_VPI], [0], [0 if you don't want JTAG VPI.])
 ])
 
-AS_IF([test "x$build_vdebug" = "xyes"], [
-  AC_DEFINE([BUILD_VDEBUG], [1], [1 if you want Cadence vdebug interface.])
-], [
-  AC_DEFINE([BUILD_VDEBUG], [0], [0 if you don't want Cadence vdebug interface.])
-])
-
 AS_IF([test "x$build_jtag_dpi" = "xyes"], [
   AC_DEFINE([BUILD_JTAG_DPI], [1], [1 if you want JTAG DPI.])
 ], [
@@ -738,6 +731,7 @@ PROCESS_ADAPTERS([PCIE_ADAPTERS], ["x$is_linux" = "xyes"], [Linux build])
 PROCESS_ADAPTERS([SERIAL_PORT_ADAPTERS], ["x$can_build_buspirate" = "xyes"],
                                          [internal error: validation should happen beforehand])
 PROCESS_ADAPTERS([LINUXSPIDEV_ADAPTER], ["x$is_linux" = "xyes"], [Linux spidev])
+PROCESS_ADAPTERS([VDEBUG_ADAPTER], [true], [unused])
 PROCESS_ADAPTERS([DUMMY_ADAPTER], [true], [unused])
 
 AS_IF([test "x$enable_linuxgpiod" != "xno"], [
@@ -786,7 +780,6 @@ AM_CONDITIONAL([IMX_GPIO], [test "x$build_imx_gpio" = "xyes"])
 AM_CONDITIONAL([AM335XGPIO], [test "x$build_am335xgpio" = "xyes"])
 AM_CONDITIONAL([BITBANG], [test "x$build_bitbang" = "xyes"])
 AM_CONDITIONAL([JTAG_VPI], [test "x$build_jtag_vpi" = "xyes"])
-AM_CONDITIONAL([VDEBUG], [test "x$build_vdebug" = "xyes"])
 AM_CONDITIONAL([JTAG_DPI], [test "x$build_jtag_dpi" = "xyes"])
 AM_CONDITIONAL([USB_BLASTER_DRIVER], [test "x$enable_usb_blaster" != "xno" -o "x$enable_usb_blaster_2" != "xno"])
 AM_CONDITIONAL([AMTJTAGACCEL], [test "x$build_amtjtagaccel" = "xyes"])
@@ -892,6 +885,7 @@ m4_foreach([adapter], [USB1_ADAPTERS,
        LIBGPIOD_ADAPTERS,
        LIBJAYLINK_ADAPTERS, PCIE_ADAPTERS, SERIAL_PORT_ADAPTERS,
        LINUXSPIDEV_ADAPTER,
+       VDEBUG_ADAPTER,
        DUMMY_ADAPTER,
        OPTIONAL_LIBRARIES,
        COVERAGE],