#include <asm/processor-flags.h>
 #include <asm/irq_vectors.h>
 #include <asm/cpufeatures.h>
-#include <asm/alternative-asm.h>
+#include <asm/alternative.h>
 #include <asm/asm.h>
 #include <asm/smap.h>
 #include <asm/frame.h>
 
 #include <linux/linkage.h>
 #include <asm/dwarf2.h>
 #include <asm/cpufeatures.h>
-#include <asm/alternative-asm.h>
+#include <asm/alternative.h>
 
        .text
        .globl __kernel_vsyscall
 
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_X86_ALTERNATIVE_ASM_H
-#define _ASM_X86_ALTERNATIVE_ASM_H
-
-#ifdef __ASSEMBLY__
-
-#include <asm/asm.h>
-
-#ifdef CONFIG_SMP
-       .macro LOCK_PREFIX
-672:   lock
-       .pushsection .smp_locks,"a"
-       .balign 4
-       .long 672b - .
-       .popsection
-       .endm
-#else
-       .macro LOCK_PREFIX
-       .endm
-#endif
-
-/*
- * objtool annotation to ignore the alternatives and only consider the original
- * instruction(s).
- */
-.macro ANNOTATE_IGNORE_ALTERNATIVE
-       .Lannotate_\@:
-       .pushsection .discard.ignore_alts
-       .long .Lannotate_\@ - .
-       .popsection
-.endm
-
-/*
- * Issue one struct alt_instr descriptor entry (need to put it into
- * the section .altinstructions, see below). This entry contains
- * enough information for the alternatives patching code to patch an
- * instruction. See apply_alternatives().
- */
-.macro altinstruction_entry orig alt feature orig_len alt_len pad_len
-       .long \orig - .
-       .long \alt - .
-       .word \feature
-       .byte \orig_len
-       .byte \alt_len
-       .byte \pad_len
-.endm
-
-/*
- * Define an alternative between two instructions. If @feature is
- * present, early code in apply_alternatives() replaces @oldinstr with
- * @newinstr. ".skip" directive takes care of proper instruction padding
- * in case @newinstr is longer than @oldinstr.
- */
-.macro ALTERNATIVE oldinstr, newinstr, feature
-140:
-       \oldinstr
-141:
-       .skip -(((144f-143f)-(141b-140b)) > 0) * ((144f-143f)-(141b-140b)),0x90
-142:
-
-       .pushsection .altinstructions,"a"
-       altinstruction_entry 140b,143f,\feature,142b-140b,144f-143f,142b-141b
-       .popsection
-
-       .pushsection .altinstr_replacement,"ax"
-143:
-       \newinstr
-144:
-       .popsection
-.endm
-
-#define old_len                        141b-140b
-#define new_len1               144f-143f
-#define new_len2               145f-144f
-
-/*
- * gas compatible max based on the idea from:
- * http://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMax
- *
- * The additional "-" is needed because gas uses a "true" value of -1.
- */
-#define alt_max_short(a, b)    ((a) ^ (((a) ^ (b)) & -(-((a) < (b)))))
-
-
-/*
- * Same as ALTERNATIVE macro above but for two alternatives. If CPU
- * has @feature1, it replaces @oldinstr with @newinstr1. If CPU has
- * @feature2, it replaces @oldinstr with @feature2.
- */
-.macro ALTERNATIVE_2 oldinstr, newinstr1, feature1, newinstr2, feature2
-140:
-       \oldinstr
-141:
-       .skip -((alt_max_short(new_len1, new_len2) - (old_len)) > 0) * \
-               (alt_max_short(new_len1, new_len2) - (old_len)),0x90
-142:
-
-       .pushsection .altinstructions,"a"
-       altinstruction_entry 140b,143f,\feature1,142b-140b,144f-143f,142b-141b
-       altinstruction_entry 140b,144f,\feature2,142b-140b,145f-144f,142b-141b
-       .popsection
-
-       .pushsection .altinstr_replacement,"ax"
-143:
-       \newinstr1
-144:
-       \newinstr2
-145:
-       .popsection
-.endm
-
-#endif  /*  __ASSEMBLY__  */
-
-#endif /* _ASM_X86_ALTERNATIVE_ASM_H */
 
 #ifndef _ASM_X86_ALTERNATIVE_H
 #define _ASM_X86_ALTERNATIVE_H
 
-#ifndef __ASSEMBLY__
-
 #include <linux/types.h>
-#include <linux/stddef.h>
 #include <linux/stringify.h>
 #include <asm/asm.h>
 
+#ifndef __ASSEMBLY__
+
+#include <linux/stddef.h>
+
 /*
  * Alternative inline assembly for SMP.
  *
  */
 #define ASM_NO_INPUT_CLOBBER(clbr...) "i" (0) : clbr
 
+#else /* __ASSEMBLY__ */
+
+#ifdef CONFIG_SMP
+       .macro LOCK_PREFIX
+672:   lock
+       .pushsection .smp_locks,"a"
+       .balign 4
+       .long 672b - .
+       .popsection
+       .endm
+#else
+       .macro LOCK_PREFIX
+       .endm
+#endif
+
+/*
+ * objtool annotation to ignore the alternatives and only consider the original
+ * instruction(s).
+ */
+.macro ANNOTATE_IGNORE_ALTERNATIVE
+       .Lannotate_\@:
+       .pushsection .discard.ignore_alts
+       .long .Lannotate_\@ - .
+       .popsection
+.endm
+
+/*
+ * Issue one struct alt_instr descriptor entry (need to put it into
+ * the section .altinstructions, see below). This entry contains
+ * enough information for the alternatives patching code to patch an
+ * instruction. See apply_alternatives().
+ */
+.macro altinstruction_entry orig alt feature orig_len alt_len pad_len
+       .long \orig - .
+       .long \alt - .
+       .word \feature
+       .byte \orig_len
+       .byte \alt_len
+       .byte \pad_len
+.endm
+
+/*
+ * Define an alternative between two instructions. If @feature is
+ * present, early code in apply_alternatives() replaces @oldinstr with
+ * @newinstr. ".skip" directive takes care of proper instruction padding
+ * in case @newinstr is longer than @oldinstr.
+ */
+.macro ALTERNATIVE oldinstr, newinstr, feature
+140:
+       \oldinstr
+141:
+       .skip -(((144f-143f)-(141b-140b)) > 0) * ((144f-143f)-(141b-140b)),0x90
+142:
+
+       .pushsection .altinstructions,"a"
+       altinstruction_entry 140b,143f,\feature,142b-140b,144f-143f,142b-141b
+       .popsection
+
+       .pushsection .altinstr_replacement,"ax"
+143:
+       \newinstr
+144:
+       .popsection
+.endm
+
+#define old_len                        141b-140b
+#define new_len1               144f-143f
+#define new_len2               145f-144f
+
+/*
+ * gas compatible max based on the idea from:
+ * http://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMax
+ *
+ * The additional "-" is needed because gas uses a "true" value of -1.
+ */
+#define alt_max_short(a, b)    ((a) ^ (((a) ^ (b)) & -(-((a) < (b)))))
+
+
+/*
+ * Same as ALTERNATIVE macro above but for two alternatives. If CPU
+ * has @feature1, it replaces @oldinstr with @newinstr1. If CPU has
+ * @feature2, it replaces @oldinstr with @feature2.
+ */
+.macro ALTERNATIVE_2 oldinstr, newinstr1, feature1, newinstr2, feature2
+140:
+       \oldinstr
+141:
+       .skip -((alt_max_short(new_len1, new_len2) - (old_len)) > 0) * \
+               (alt_max_short(new_len1, new_len2) - (old_len)),0x90
+142:
+
+       .pushsection .altinstructions,"a"
+       altinstruction_entry 140b,143f,\feature1,142b-140b,144f-143f,142b-141b
+       altinstruction_entry 140b,144f,\feature2,142b-140b,145f-144f,142b-141b
+       .popsection
+
+       .pushsection .altinstr_replacement,"ax"
+143:
+       \newinstr1
+144:
+       \newinstr2
+145:
+       .popsection
+.endm
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_X86_ALTERNATIVE_H */
 
 #include <linux/objtool.h>
 
 #include <asm/alternative.h>
-#include <asm/alternative-asm.h>
 #include <asm/cpufeatures.h>
 #include <asm/msr-index.h>
 #include <asm/unwind_hints.h>
 
 
 #include <asm/nops.h>
 #include <asm/cpufeatures.h>
+#include <asm/alternative.h>
 
 /* "Raw" instruction opcodes */
 #define __ASM_CLAC     ".byte 0x0f,0x01,0xca"
 
 #ifdef __ASSEMBLY__
 
-#include <asm/alternative-asm.h>
-
 #ifdef CONFIG_X86_SMAP
 
 #define ASM_CLAC \
 
 #else /* __ASSEMBLY__ */
 
-#include <asm/alternative.h>
-
 #ifdef CONFIG_X86_SMAP
 
 static __always_inline void clac(void)
 
  */
 
 #include <linux/linkage.h>
-#include <asm/alternative-asm.h>
+#include <asm/alternative.h>
 
 /* if you want SMP support, implement these with real spinlocks */
 .macro LOCK reg
 
  */
 
 #include <linux/linkage.h>
-#include <asm/alternative-asm.h>
+#include <asm/alternative.h>
 
 .macro read64 reg
        movl %ebx, %eax
 
 
 #include <linux/linkage.h>
 #include <asm/cpufeatures.h>
-#include <asm/alternative-asm.h>
+#include <asm/alternative.h>
 #include <asm/export.h>
 
 /*
 
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/cpufeatures.h>
-#include <asm/alternative-asm.h>
+#include <asm/alternative.h>
 #include <asm/asm.h>
 #include <asm/smap.h>
 #include <asm/export.h>
 
 #include <linux/linkage.h>
 #include <asm/errno.h>
 #include <asm/cpufeatures.h>
-#include <asm/alternative-asm.h>
+#include <asm/alternative.h>
 #include <asm/export.h>
 
 .pushsection .noinstr.text, "ax"
 
  */
 #include <linux/linkage.h>
 #include <asm/cpufeatures.h>
-#include <asm/alternative-asm.h>
+#include <asm/alternative.h>
 #include <asm/export.h>
 
 #undef memmove
 
 
 #include <linux/linkage.h>
 #include <asm/cpufeatures.h>
-#include <asm/alternative-asm.h>
+#include <asm/alternative.h>
 #include <asm/export.h>
 
 /*
 
 #include <linux/linkage.h>
 #include <asm/dwarf2.h>
 #include <asm/cpufeatures.h>
-#include <asm/alternative-asm.h>
+#include <asm/alternative.h>
 #include <asm/export.h>
 #include <asm/nospec-branch.h>
 #include <asm/unwind_hints.h>