from general PHY binding: Should be "dp".
 
 Optional properties for dp-controller:
+       -force-hpd:
+               Indicate driver need force hpd when hpd detect failed, this
+               is used for some eDP screen which don't have hpd signal.
        -hpd-gpios:
                Hotplug detect GPIO.
                Indicates which GPIO should be used for hotplug detection
                * Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
                * Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
 
-
 [1]: Documentation/devicetree/bindings/media/video-interfaces.txt
 -------------------------------------------------------------------------------
 
 
 {
        int timeout_loop = 0;
 
-       while (analogix_dp_get_plug_in_status(dp) != 0) {
+       while (timeout_loop < DP_TIMEOUT_LOOP_COUNT) {
+               if (analogix_dp_get_plug_in_status(dp) == 0)
+                       return 0;
+
                timeout_loop++;
-               if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
-                       dev_err(dp->dev, "failed to get hpd plug status\n");
-                       return -ETIMEDOUT;
-               }
                usleep_range(10, 11);
        }
 
+       /*
+        * Some edp screen do not have hpd signal, so we can't just
+        * return failed when hpd plug in detect failed, DT property
+        * "force-hpd" would indicate whether driver need this.
+        */
+       if (!dp->force_hpd)
+               return -ETIMEDOUT;
+
+       /*
+        * The eDP TRM indicate that if HPD_STATUS(RO) is 0, AUX CH
+        * will not work, so we need to give a force hpd action to
+        * set HPD_STATUS manually.
+        */
+       dev_dbg(dp->dev, "failed to get hpd plug status, try to force hpd\n");
+
+       analogix_dp_force_hpd(dp);
+
+       if (analogix_dp_get_plug_in_status(dp) != 0) {
+               dev_err(dp->dev, "failed to get hpd plug in status\n");
+               return -EINVAL;
+       }
+
+       dev_dbg(dp->dev, "success to get plug in status after force hpd\n");
+
        return 0;
 }
 
        if (IS_ERR(dp->reg_base))
                return PTR_ERR(dp->reg_base);
 
+       dp->force_hpd = of_property_read_bool(dev->of_node, "force-hpd");
+
        dp->hpd_gpio = of_get_named_gpio(dev->of_node, "hpd-gpios", 0);
        if (!gpio_is_valid(dp->hpd_gpio))
                dp->hpd_gpio = of_get_named_gpio(dev->of_node,
 
        struct phy              *phy;
        int                     dpms_mode;
        int                     hpd_gpio;
+       bool                    force_hpd;
 
        struct analogix_dp_plat_data *plat_data;
 };
                                       bool enable);
 void analogix_dp_init_analog_func(struct analogix_dp_device *dp);
 void analogix_dp_init_hpd(struct analogix_dp_device *dp);
+void analogix_dp_force_hpd(struct analogix_dp_device *dp);
 enum dp_irq_type analogix_dp_get_irq_type(struct analogix_dp_device *dp);
 void analogix_dp_clear_hotplug_interrupts(struct analogix_dp_device *dp);
 void analogix_dp_reset_aux(struct analogix_dp_device *dp);
 
        writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
 }
 
+void analogix_dp_force_hpd(struct analogix_dp_device *dp)
+{
+       u32 reg;
+
+       reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+       reg = (F_HPD | HPD_CTRL);
+       writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+}
+
 enum dp_irq_type analogix_dp_get_irq_type(struct analogix_dp_device *dp)
 {
        u32 reg;